-
Post-Synthetic Treatment of Nickel-Iron Layered Double Hydroxides for the Optimum Catalysis of the Oxygen Evolution Reaction
Authors:
Daire Tyndall,
Sonia Jaskaniec,
Brian Shortall,
Ahin Roy,
Lee Gannon,
Katie ONeill,
Michelle P. Browne,
Joao Coelho,
Cormac McGuinness,
Georg S. Duesberg,
Valeria Nicolosi
Abstract:
Nickel-iron layered double hydroxide (NiFe LDH) platelets with high morphological regularity and sub-micrometre lateral dimensions were synthesized using a homogeneous precipitation technique for highly efficient catalysis of the oxygen evolution reaction (OER). Considering edge sites are the point of activity, efforts were made to control platelet size within the synthesized dispersions. The goal…
▽ More
Nickel-iron layered double hydroxide (NiFe LDH) platelets with high morphological regularity and sub-micrometre lateral dimensions were synthesized using a homogeneous precipitation technique for highly efficient catalysis of the oxygen evolution reaction (OER). Considering edge sites are the point of activity, efforts were made to control platelet size within the synthesized dispersions. The goal is to controllably isolate and characterize size-reduced NiFe LDH particles. Synthetic approaches for size control of NiFe LDH platelets have not been transferable based on published work with other LDH materials and for that reason, we instead use post-synthetic treatment techniques to improve edge-site density. In the end, size reduced NiFe LDH/single-wall carbon nanotube (SWCNT) composites allowed to further reduce the OER overpotential to 237 plus/minus 7 mV ( L = 0.16 plus/minus 0.01 micrometres, 20 wt% SWCNT), which is one of the best values reported to date. This approach as well improved the long term activity of the catalyst in operating conditions.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
The Potential of MXene Materials as a Component in the Catalyst Layer for the Oxygen Evolution Reaction
Authors:
Michelle P. Browne,
Daire Tyndall,
Valeria Nicolosi
Abstract:
MXenes are a class of 2D/layered materials which are highly conductive, hydrophilic, have a large electrochemical surface area and are easily processible into electrodes for energy applications. Since the discovery of MXenes over ten years ago, these materials have been mainly used in the preparation of electrodes for batteries and supercapacitors. However, due to their aforementioned properties,…
▽ More
MXenes are a class of 2D/layered materials which are highly conductive, hydrophilic, have a large electrochemical surface area and are easily processible into electrodes for energy applications. Since the discovery of MXenes over ten years ago, these materials have been mainly used in the preparation of electrodes for batteries and supercapacitors. However, due to their aforementioned properties, MXenes could potentially be utilised as a component in the catalyst layer for the Oxygen Evolution Reaction (OER). This opinion piece will discuss some of the recent literature in the area of hybrid catalysts consisting of various Transition Metal Oxides (TMOs) and MXenes for the OER. We will also discuss current drawbacks and future outlook in this new area of research.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Low-temperature synthesis of high quality Ni-Fe layered double hydroxides hexagonal platelets
Authors:
Sonia Jaskaniec,
Christopher Hobbs,
Andres Seral-Ascaso,
Joao Coelho,
Michelle P. Browne,
Daire Tyndall,
Takayoshi Sasaki,
Valeria Nicolosi
Abstract:
This paper describes the wet-chemistry synthesis of highly crystalline hexagonal flakes of Ni-Fe layered double hydroxide (LDH) produced at temperature as low as 100 oC. The flakes with diameter in the range of 0.5-1.5 um and the thickness between 15 and 20 nm were obtained by homogeneous precipitation method with the use of triethanolamine (TEA) and urea. By analyzing the intermediate products, i…
▽ More
This paper describes the wet-chemistry synthesis of highly crystalline hexagonal flakes of Ni-Fe layered double hydroxide (LDH) produced at temperature as low as 100 oC. The flakes with diameter in the range of 0.5-1.5 um and the thickness between 15 and 20 nm were obtained by homogeneous precipitation method with the use of triethanolamine (TEA) and urea. By analyzing the intermediate products, it is suggested that, differently from previous reports, a thermodynamically metastable iron oxyhydroxide and Ni-TEA complex are firstly formed at room temperature. Subsequently, when the mixture is heated to 100 oC and the pH increases due to the thermal decomposition of urea, Ni2+ and Fe3+ are slowly released and then recombine, thus leading to formation of pure, highly-crystalline Ni-Fe LDH flakes. This material showed promising results as an electrocatalyst in oxygen evolution reaction (OER) providing an overpotential value of 0.36 V.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.
-
Atomic force microscope nanolithography of graphene: cuts, pseudo-cuts and tip current measurements
Authors:
R. K. Puddy,
P. H. Scard,
D. Tyndall,
M. R. Connolly,
C. G. Smith,
G. A. C. Jones,
A. Lombardo,
A. C. Ferrari,
M. R. Buitelaar
Abstract:
We investigate atomic force microscope nanolithography of single and bilayer graphene. In situ tip current measurements show that cutting of graphene is not current driven. Using a combination of transport measurements and scanning electron microscopy we show that, while indentations accompanied by tip current appear in the graphene lattice for a range of tip voltages, real cuts are characterized…
▽ More
We investigate atomic force microscope nanolithography of single and bilayer graphene. In situ tip current measurements show that cutting of graphene is not current driven. Using a combination of transport measurements and scanning electron microscopy we show that, while indentations accompanied by tip current appear in the graphene lattice for a range of tip voltages, real cuts are characterized by a strong reduction of the tip current above a threshold voltage. The reliability and flexibility of the technique is demonstrated by the fabrication, measurement, modification and re-measurement of graphene nanodevices with resolution down to 15 nm.
△ Less
Submitted 14 February, 2011;
originally announced February 2011.
-
Self-aligned charge read-out for InAs nanowire quantum dots
Authors:
I. Shorubalko,
R. Leturcq,
A. Pfund,
D. Tyndall,
R. Krischek,
S. Schon,
K. Ensslin
Abstract:
A highly sensitive charge detector is realized for a quantum dot in an InAs nanowire. We have developed a self-aligned etching process to fabricate in a single step a quantum point contact in a two-dimensional electron gas and a quantum dot in an InAs nanowire. The quantum dot is strongly coupled to the underlying point contact which is used as a charge detector. The addition of one electron to…
▽ More
A highly sensitive charge detector is realized for a quantum dot in an InAs nanowire. We have developed a self-aligned etching process to fabricate in a single step a quantum point contact in a two-dimensional electron gas and a quantum dot in an InAs nanowire. The quantum dot is strongly coupled to the underlying point contact which is used as a charge detector. The addition of one electron to the quantum dot leads to a change of the conductance of the charge detector by typically 20%. The charge sensitivity of the detector is used to measure Coulomb diamonds as well as charging events outside the dot. Charge stability diagrams measured by transport through the quantum dot and charge detection merge perfectly.
△ Less
Submitted 18 March, 2008; v1 submitted 11 December, 2007;
originally announced December 2007.