Showing 1–9 of 9 results for author: Turchetta, R

The Highly Miniaturised Radiation Monitor

Authors: E. F. Mitchell, H. M. Araújo, E. Daly, N. Guerrini, S. Gunes-Lasnet, D. Griffin, A. Marshall, A. Menicucci, T. Morse, O. Poyntz-Wright, R. Turchetta, S. Woodward

Abstract: We present the design and preliminary calibration results of a novel highly miniaturised particle radiation monitor (HMRM) for spacecraft use. The HMRM device comprises a telescopic configuration of active pixel sensors enclosed in a titanium shield, with an estimated total mass of 52 g and volume of 15 cm$^3$. The monitor is intended to provide real-time dosimetry and identification of energetic… ▽ More We present the design and preliminary calibration results of a novel highly miniaturised particle radiation monitor (HMRM) for spacecraft use. The HMRM device comprises a telescopic configuration of active pixel sensors enclosed in a titanium shield, with an estimated total mass of 52 g and volume of 15 cm$^3$. The monitor is intended to provide real-time dosimetry and identification of energetic charged particles in fluxes of up to 10$^8$ cm$^{-2}$ s$^{-1}$ (omnidirectional). Achieving this capability with such a small instrument could open new prospects for radiation detection in space. △ Less

Submitted 20 June, 2014; v1 submitted 15 January, 2014; originally announced January 2014.

Comments: 17 pages, 15 figures

Design and performance of a CMOS study sensor for a binary readout electromagnetic calorimeter

Authors: J. A. Ballin, R. Coath, J. P. Crooks, P. D. Dauncey, A. -M. Magnan, Y. Mikami, O. D. Miller, M. Noy, V. Rajovic, M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani, N. K. Watson, J. A. Wilson, Z. Zhang

Abstract: We present a study of a CMOS test sensor which has been designed, fabricated and characterised to investigate the parameters required for a binary readout electromagnetic calorimeter. The sensors were fabricated with several enhancements in addition to standard CMOS processing. Detailed simulations and experimental results of the performance of the sensor are presented. The sensor and pixels are s… ▽ More We present a study of a CMOS test sensor which has been designed, fabricated and characterised to investigate the parameters required for a binary readout electromagnetic calorimeter. The sensors were fabricated with several enhancements in addition to standard CMOS processing. Detailed simulations and experimental results of the performance of the sensor are presented. The sensor and pixels are shown to behave in accordance with expectations and the processing enhancements are found to be essential to achieve the performance required. △ Less

Submitted 4 May, 2011; v1 submitted 22 March, 2011; originally announced March 2011.

Comments: Submitted to J.Inst

Journal ref: J.Inst 6 (2011) P05009

Design Study for a SuperB Pixel Vertex Detector

Authors: A. Bevan, J. Crooks, A. Lintern, A. Nichols, M. Stanitzki, R. Turchetta, F. F. Wilson

Abstract: We present a conceptual design for a low-mass, all pixel vertex detector using the CMOS quadruple well INMAPS process, capable of working in the very high luminosities exceeding 10^36 /cm^2 /sec that can be expected at the next generation e+e- B factories. We concentrate on the vertexing requirements necessary for time-dependent measurements that are also relevant to searches for new physics beyon… ▽ More We present a conceptual design for a low-mass, all pixel vertex detector using the CMOS quadruple well INMAPS process, capable of working in the very high luminosities exceeding 10^36 /cm^2 /sec that can be expected at the next generation e+e- B factories. We concentrate on the vertexing requirements necessary for time-dependent measurements that are also relevant to searches for new physics beyond the Standard Model. We investigate different configurations and compare with the baseline designs for the SuperB and BaBar experiments. △ Less

Submitted 11 August, 2010; originally announced August 2010.

Comments: 8 pages and 8 figures, submitted to NIM

The LCFIVertex package: vertexing, flavour tagging and vertex charge reconstruction with an ILC vertex detector

Authors: LCFI Collaboration, David Bailey, Erik Devetak, Mark Grimes, Kristian Harder, Sonja Hillert, David Jackson, Talini Pinto Jayawardena, Ben Jeffery, Tomas Lastovicka, Clare Lynch, Victoria Martin, Roberval Walsh, Phil Allport, Yambazi Banda, Craig Buttar, Alexandre Cheplakov, David Cussans, Chris Damerell, Nicolo de Groot, Johan Fopma, Brian Foster, Senerath Galagedera, Rui Gao, Anthony Gillman , et al. (36 additional authors not shown)

Abstract: The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and… ▽ More The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and for identification of the flavour and charge of the leading hadron in heavy flavour jets. These tools are essential for the ongoing optimisation of the vertex detector design for linear colliders such as the ILC. The paper describes the algorithms implemented in the LCFIVertex package, as well as the scope of the code and its performance for a typical vertex detector design. △ Less

Submitted 20 August, 2009; originally announced August 2009.

Comments: 40 pages, accepted by NIM A

Journal ref: Nucl.Instrum.Meth.A610:573-589,2009

A digital ECAL based on MAPS

Authors: J. A. Ballin, P. D. Dauncey, A. -M. Magnan, M. Noy, Y. Mikami, O. Miller, V. Rajovic, N. K. Watson, J. A. Wilson, J. P. Crooks, M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani

Abstract: Progress is reported on the development and testing of Monolithic Active Pixel Sensors (MAPS) for a Si-W ECAL for the ILC. Using laser and source setups, a first version of the sensor has been characterised through measurements of the absolute gain calibration, noise and pedestal. The pixel-to-pixel gain spread is 10%. Charge diffusion has been measured and found to be compatible with simulation… ▽ More Progress is reported on the development and testing of Monolithic Active Pixel Sensors (MAPS) for a Si-W ECAL for the ILC. Using laser and source setups, a first version of the sensor has been characterised through measurements of the absolute gain calibration, noise and pedestal. The pixel-to-pixel gain spread is 10%. Charge diffusion has been measured and found to be compatible with simulation results. The charge collected by a single pixel varies from 50% to 20% depending on where it is generated. After adding detector effects to the Geant4 simulation of an ILC-like ECAL, using the measured parameters, the energy resolution is found to be 35% higher than the ideal resolution, but is still lower than the resolution obtained for an equivalent analogue ECAL. △ Less

Submitted 28 January, 2009; originally announced January 2009.

Comments: 4 pages, 5 figures, to appear in the proceedings of the LCWS08 conference

Monolithic Active Pixel Sensors (MAPS) in a quadruple well technology for nearly 100% fill factor and full CMOS pixels

Authors: J. A. Ballin, J. P. Crooks, P. D. Dauncey, A. -M. Magnan, Y. Mikami, O. D. Miller, M. Noy, V. Rajovic, M. M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani, N. K. Watson, J. A. Wilson

Abstract: In this paper we present a novel, quadruple well process developed in a modern 0.18mu CMOS technology called INMAPS. On top of the standard process, we have added a deep P implant that can be used to form a deep P-well and provide screening of N-wells from the P-doped epitaxial layer. This prevents the collection of radiation-induced charge by unrelated N-wells, typically ones where PMOS transis… ▽ More In this paper we present a novel, quadruple well process developed in a modern 0.18mu CMOS technology called INMAPS. On top of the standard process, we have added a deep P implant that can be used to form a deep P-well and provide screening of N-wells from the P-doped epitaxial layer. This prevents the collection of radiation-induced charge by unrelated N-wells, typically ones where PMOS transistors are integrated. The design of a sensor specifically tailored to a particle physics experiment is presented, where each 50mu pixel has over 150 PMOS and NMOS transistors. The sensor has been fabricated in the INMAPS process and first experimental evidence of the effectiveness of this process on charge collection is presented, showing a significant improvement in efficiency. △ Less

Submitted 18 July, 2008; originally announced July 2008.

Comments: 15 pages, 10 figures, submitted to "Sensors"

A MAPS-based Digital Electromagnetic Calorimeter for the ILC

Authors: J. A. Ballin, P. D. Dauncey, A. -M. Magnan, M. Noy, Y. Mikami, O. Miller, V. Rajović, N. K. Watson, J. A. Wilson, J. P. Crooks, M. Stanitzki, K. D. Stefanov, R. Turchetta, M. Tyndel, E. G. Villani

Abstract: A novel design for a silicon-tungsten electromagnetic calorimeter is described, based on Monolithic Active Pixel Sensors (MAPS). A test sensor with a pixel size of 50x50 um2 has been fabricated in July 2007. The simulation of the physical sensor is done using a detailed three-dimensional charge spread algorithm. Physics studies of the sensor are done including a digitisation algorithm taking int… ▽ More A novel design for a silicon-tungsten electromagnetic calorimeter is described, based on Monolithic Active Pixel Sensors (MAPS). A test sensor with a pixel size of 50x50 um2 has been fabricated in July 2007. The simulation of the physical sensor is done using a detailed three-dimensional charge spread algorithm. Physics studies of the sensor are done including a digitisation algorithm taking into account the charge sharing, charge collection efficiency, noise, and dead areas. The influence of the charge sharing effect is found to be important and hence needs to be measured precisely. △ Less

Submitted 10 September, 2007; originally announced September 2007.

Comments: 4 pages, 4 figures. Talk presented at LCWS07

CMOS Monolithic Active Pixel Sensors (MAPS) for future vertex detectors

Authors: R. Turchetta

Abstract: This paper reviews the development of CMOS Monolithic Active Pixel Sensors (MAPS) for future vertex detectors. MAPS are developed in a standard CMOS technology. In the imaging field, where the technology found its first applications, they are also known as CMOS Image Sensors. The use of MAPS as a detector for particle physics was first proposed at the end of 1999. Since then, their good performa… ▽ More This paper reviews the development of CMOS Monolithic Active Pixel Sensors (MAPS) for future vertex detectors. MAPS are developed in a standard CMOS technology. In the imaging field, where the technology found its first applications, they are also known as CMOS Image Sensors. The use of MAPS as a detector for particle physics was first proposed at the end of 1999. Since then, their good performance in terms of spatial resolution, efficiency, radiation hardness have been demonstrated and work is now well under way to deliver the first MAPS-based vertex detectors. △ Less

Submitted 29 May, 2006; originally announced May 2006.

Comments: Invited talk at International Symposium on the Development of Detectors for Particle, AstroParticle and Synchrtron Radiation Experiments, Stanford Ca (SNIC06) 4 pages, pdf, 2 TIFF figures, PSN0006

Report number: PSN0006

Journal ref: eConf C0604032 (2006) 0006; JINST 1 (2006) P08004

High resolution pixel detectors for e+e- linear colliders

Authors: M. Caccia, R. Campagnolo, C. Meroni, W. Kucewicz, G. Deptuch, A. Zalewska, M. Battaglia, K. Osterberg, R. Orava, S. Higueret, M. Winter, R. Turchetta, P. Grabiec, B. Jaroszewicz, J. Marczewski

Abstract: The physics goals at the future e+e- linear collider require high performance vertexing and impact parameter resolution. Two possible technologies for the vertex detector of an experimental apparatus are outlined in the paper: an evolution of the Hybrid Pixel Sensors already used in high energy physics experiments and a new detector concept based on the monolithic CMOS sensors. The physics goals at the future e+e- linear collider require high performance vertexing and impact parameter resolution. Two possible technologies for the vertex detector of an experimental apparatus are outlined in the paper: an evolution of the Hybrid Pixel Sensors already used in high energy physics experiments and a new detector concept based on the monolithic CMOS sensors. △ Less

Submitted 11 October, 1999; originally announced October 1999.

Comments: 8 pages, to appear on the Proceedings of the International Workshop on Linear Colliders LCWS99, Sitges (Spain), April 28 - May 5, 1999