-
Numerical analysis of the efficiency of face masks for preventing droplet airborne infections
Authors:
Keiji Onishi,
Akiyoshi Iida,
Masashi Yamakawa,
Makoto Tsubokura
Abstract:
In this study, the flow field around face masks was visualized and evaluated using computational fluid dynamics. The protective efficiency of face masks suppressing droplet infection owing to differences in the shape, medium, and doubling usage is predicted. Under the ongoing COVID-19 pandemic condition, many studies have been conducted to highlight that airborne transmission is the main transmiss…
▽ More
In this study, the flow field around face masks was visualized and evaluated using computational fluid dynamics. The protective efficiency of face masks suppressing droplet infection owing to differences in the shape, medium, and doubling usage is predicted. Under the ongoing COVID-19 pandemic condition, many studies have been conducted to highlight that airborne transmission is the main transmission route. However, the virus infection prevention effect of face masks has not been sufficiently discussed, and thus remains as a controversial issue. Therefore, we aimed to provide a beneficial index for the society. The topology-free immersed boundary method, which is advantageous for complex shapes, was used to model the flow in the constriction area, including the contact surface between the face and mask. The jet formed from the oral cavity is guided to the outside through the surface of the mask and leaks from the gap between the face and mask. A Darcy-type model of porous media was used to model the flow resistance of masks. A random variable stochastic model was used to measure particle transmittance. We evaluated the differences in the amount of leakage and deposition of the droplets during exhalation and inhalation, depending on the differences in the conditions between the surgical and cloth masks owing to coughing and breathing. The obtained result could be attributed to the epidemiological measures adopted against both the reduction of the risk of infecting others by suppressing the exhalation, and the inhalation amounts.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Digital transformation of droplet/aerosol infection risk assessment realized on "Fugaku" for the fight against COVID-19
Authors:
Kazuto Ando,
Rahul Bale,
ChungGang Li,
Satoshi Matsuoka,
Keiji Onishi,
Makoto Tsubokura
Abstract:
The fastest supercomputer in 2020, Fugaku, has not only achieved digital transformation of epidemiology in allowing end-to-end, detailed quantitative modeling of COVID-19 transmissions for the first time, but also transformed the behavior of the entire Japanese public through its detailed analysis of transmission risks in multitudes of societal situations entailing heavy risks. A novel aerosol sim…
▽ More
The fastest supercomputer in 2020, Fugaku, has not only achieved digital transformation of epidemiology in allowing end-to-end, detailed quantitative modeling of COVID-19 transmissions for the first time, but also transformed the behavior of the entire Japanese public through its detailed analysis of transmission risks in multitudes of societal situations entailing heavy risks. A novel aerosol simulation methodology was synthesized out of a combination of a new CFD methods meeting industrial demands, CUBE, which not only allowed the simulations to scale massively with high resolution required for micrometer virus-containing aerosol particles, but also extremely rapid time-to-solution due to its ability to generate the digital twins representing multitudes of societal situations in minutes not week, attaining true overall application high performance; such simulations have been running for the past 1.5 years on Fugaku, cumulatively consuming top supercomputer-class resources and the result communicated by the media as well as becoming official public policies.
△ Less
Submitted 22 November, 2021; v1 submitted 19 October, 2021;
originally announced October 2021.
-
Quantifying the COVID19 infection risk due to droplet/aerosol inhalation
Authors:
Rahul Bale,
Akiyoshi Iida,
Masashi Yamakawa,
ChungGang Li,
Makoto Tsubokura
Abstract:
The dose-response model has been widely used for quantifying the risk of infection of airborne diseases like COVID-19. The model has been used in the room-average analysis of infection risk and analysis using passive scalars as a proxy for aerosol transport. However, it has not been employed for risk estimation in numerical simulations of droplet dispersion. In this work, we develop a framework fo…
▽ More
The dose-response model has been widely used for quantifying the risk of infection of airborne diseases like COVID-19. The model has been used in the room-average analysis of infection risk and analysis using passive scalars as a proxy for aerosol transport. However, it has not been employed for risk estimation in numerical simulations of droplet dispersion. In this work, we develop a framework for the evaluation of the probability of infection in droplet dispersion simulations using the dose-response model. We introduce a version of the model that can incorporate the higher transmissibility of variant strains of SARS-CoV2 and the effect of vaccination in evaluating the probability of infection. Numerical simulations of droplet dispersion during speech are carried out to investigate the infection risk over space and time using the model. The advantage of droplet dispersion simulations for risk evaluation is demonstrated through the analysis of the effect of humidity on infection risk.
△ Less
Submitted 8 September, 2022; v1 submitted 6 October, 2021;
originally announced October 2021.
-
A one-sided direct forcing immersed boundary method using moving least squares
Authors:
Rahul Bale,
Amneet Pal Singh Bhalla,
Boyce E. Griffith,
Makoto Tsubokura
Abstract:
This paper presents a one-sided immersed boundary (IB) method using kernel functions constructed via a moving least squares (MLS) method. The resulting kernels effectively couple structural degrees of freedom to fluid variables on only one side of the fluid-structure interface. This reduces spurious feedback forcing and internal flows that are typically observed in IB models that use isotropic ker…
▽ More
This paper presents a one-sided immersed boundary (IB) method using kernel functions constructed via a moving least squares (MLS) method. The resulting kernels effectively couple structural degrees of freedom to fluid variables on only one side of the fluid-structure interface. This reduces spurious feedback forcing and internal flows that are typically observed in IB models that use isotropic kernel functions to couple the structure to fluid degrees of freedom on both sides of the interface. The method developed here extends the original MLS methodology introduced by Vanella and Balaras (J Comput Phys, 2009). Prior IB/MLS methods have used isotropic kernel functions that coupled fluid variables on both sides of the boundary to the interfacial degrees of freedom. The original IB/MLS approach converts the cubic spline weights typically employed in MLS reconstruction into an IB kernel function that satisfies particular discrete moment conditions. This paper shows that the same approach can be used to construct one-sided kernel functions (kernel functions are referred to as generating functions in the MLS literature). We also examine the performance of the new approach for a family of kernel functions introduced by Peskin. It is demonstrated that the one-sided MLS construction tends to generate non-monotone interpolation kernels with large over- and undershoots. We present two simple weight shifting strategies to construct generating functions that are positive and monotone, which enhances the stability of the resulting IB methodology. Benchmark cases are used to test the order of accuracy and verify the one-sided IB/MLS simulations in both two and three spatial dimensions. This new IB/MLS method is also used to simulate flow over the Ahmed car model, which highlights the applicability of this methodology for modeling complex engineering flows.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Stay with Your Community: Bridges between Clusters Trigger Expansion of COVID-19
Authors:
Yukio Ohsawa,
Masaharu Tsubokura
Abstract:
The spreading of virus infection is here simulated over artificial human networks. The real-space urban life of people is modeled as a modified scale-free network with constraints. A scale-free network has been adopted in several studies for modeling on-line communities so far but is modified here for the aim to represent peoples' social behaviors where the generated communities are restricted ref…
▽ More
The spreading of virus infection is here simulated over artificial human networks. The real-space urban life of people is modeled as a modified scale-free network with constraints. A scale-free network has been adopted in several studies for modeling on-line communities so far but is modified here for the aim to represent peoples' social behaviors where the generated communities are restricted reflecting the spatiotemporal constraints in the real life. Furthermore, the networks have been extended by introducing multiple cliques in the initial step of network construction and enabling people to zero-degree people as well as popular (large degree) people. As a result, four findings and a policy proposal have been obtained. First, the "second waves" occur without external influence or constraints on contacts or the releasing of the constraints. These second waves, mostly lower than the first wave, implies the bridges between infected and fresh clusters may trigger new expansions of spreading. Second, if the network changes the structure on the way of infection spreading or after its suppression, the peak of the second wave can be larger than the first. Third, the peak height in the time series depends on the difference between the upper bound of the number of people each member accepts to meet and the number of people one chooses to meet. This tendency is observed for two kinds of artificial networks and implies the impact of the bridges between communities on the virus spreading. Fourth, the release of once given constraint may trigger a second wave higher than the peak of the time series without introducing any constraint from the beginning, if the release is introduced at a time close to the peak. Thus, both governments and individuals should be careful in returning to human society with inter-community contacts.
△ Less
Submitted 10 July, 2020; v1 submitted 26 June, 2020;
originally announced June 2020.
-
Topology-free immersed boundary method for incompressible turbulence flows: An aerodynamic simulation for 'dirty' CAD geometry
Authors:
Keiji Onishi,
Makoto Tsubokura
Abstract:
To design a method to solve the issues of handling 'dirty' and highly complex geometries, the topology-free method combined with the immersed boundary method is presented for viscous and incompressible flows at a high Reynolds number. The method simultaneously employs a ghost-cell technique and distributed forcing technique to impose the boundary conditions. An axis-projected interpolation scheme…
▽ More
To design a method to solve the issues of handling 'dirty' and highly complex geometries, the topology-free method combined with the immersed boundary method is presented for viscous and incompressible flows at a high Reynolds number. The method simultaneously employs a ghost-cell technique and distributed forcing technique to impose the boundary conditions. An axis-projected interpolation scheme is used to avoid searching failures during fluid and solid identification. This method yields a topology-free immersed boundary, which particularly suits flow simulations of highly complex geometries. Difficulties generally arise when generating the calculation grid for these scenarios. This method allows dirty data to be handled without any preparatory treatment work to simplify or clean-up the geometry. This method is also applicable to the coherent structural turbulence model employed in this study. The verification cases, used in conjunction with the second-order central-difference scheme, resulted in first-order accuracy at finer resolution, although the coarser resolution retained second-order accuracy. This method is fully parallelized for distributed memory platforms. In this study, the accuracy and fidelity of this method were examined by simulating the flow around the bluff body, past a flat plate, and past dirty spheres. These simulations were compared with experimental data and other established results. Finally, results from the simulation of practical applications demonstrate the ability of the method to model highly complex, non-canonical three-dimensional flows. The countermeasure based on the accurate classification of geometric features has provided a robust and reasonable solution.
△ Less
Submitted 15 February, 2020;
originally announced February 2020.
-
CUBE: A scalable framework for large-scale industrial simulations
Authors:
Niclas Jansson,
Rahul Bale,
Keiji Onishi,
Makoto Tsubokura
Abstract:
Writing high performance solvers for engineering applications is a delicate task. These codes are often developed on an application to application basis, highly optimized to solve a certain problem. Here, we present our work on develo** a general simulation framework for efficient computation of time resolved approximations of complex industrial flow problems - Complex Unified Building cubE meth…
▽ More
Writing high performance solvers for engineering applications is a delicate task. These codes are often developed on an application to application basis, highly optimized to solve a certain problem. Here, we present our work on develo** a general simulation framework for efficient computation of time resolved approximations of complex industrial flow problems - Complex Unified Building cubE method (Cube). To address the challenges of emerging, modern supercomputers, suitable data structures and communication patterns are developed and incorporated into Cube. We use a Cartesian grid together with various immersed boundary methods to accurately capture moving, complex geometries. The asymmetric workload of the immersed boundary is balanced by a predictive dynamic load balancer, and a multithreaded halo-exchange algorithm is employed to efficiently overlap communication with computations. Our work also concerns efficient methods for handling the large amount of data produced by large-scale flow simulations, such as scalable parallel I/O, data compression and in-situ processing.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Whole-body counter surveys of over 2700 babies and small children in and around Fukushima Prefecture 33 to 49 months after the Fukushima Daiichi NPP accident
Authors:
Ryugo S. Hayano,
Masaharu Tsubokura,
Makoto Miyazaki,
Akihiko Ozaki,
Yuki Shimada,
Toshiyuki Kambe,
Tsuyoshi Nemoto,
Tomoyoshi Oikawa,
Yukio Kanazawa,
Masahiko Nihei,
Yu Sakura,
Hiroaki Shimmura,
Junichi Akiyama,
Michio Tokiwa
Abstract:
BABYSCAN, a whole body counter (WBC) for small children was developed in 2013, and units have been installed at three hospitals in Fukushima Prefecture. Between December, 2013 and March, 2015, 2707 children between the ages of 0 and 11 have been scanned, and none had detectable levels of radioactive cesium. The minimum detectable activities (MDAs) for $^{137}$Cs were $\leq 3.5$ Bq kg$^{-1}$ for ag…
▽ More
BABYSCAN, a whole body counter (WBC) for small children was developed in 2013, and units have been installed at three hospitals in Fukushima Prefecture. Between December, 2013 and March, 2015, 2707 children between the ages of 0 and 11 have been scanned, and none had detectable levels of radioactive cesium. The minimum detectable activities (MDAs) for $^{137}$Cs were $\leq 3.5$ Bq kg$^{-1}$ for ages 0-1, decreasing to $\leq 2$ Bq kg$^{-1}$ for ages 10-11. Including the $^{134}$Cs contribution, these translate to a maximum committed effective dose of $\sim 16 μ$Sv y$^{-1}$ even for newborn babies, and therefore the internal exposure risks can be considered negligibly small.
Analysis of the questionnaire filled out by the parents of the scanned children regarding their families' food and water consumption revealed that the majority of children residing in the town of Miharu regularly consume local or home-grown rice and vegetables, while in Minamisoma, a majority avoid tap water and produce from Fukushima. The data show, however, no correlation between consumption of locally produced food and water and the children's body burdens.
△ Less
Submitted 7 September, 2015; v1 submitted 30 July, 2015;
originally announced July 2015.
-
Whole body counter surveys of Miharu-town school children for four consecutive years after the Fukushima NPP accident
Authors:
Ryugo S. Hayano,
Masaharu Tsubokura,
Makoto Miyazaki,
Hideo Satou,
Katsumi Sato,
Shin Masaki,
Yu Sakuma
Abstract:
Comprehensive whole-body counter surveys of Miharu town school children have been conducted for four consecutive years, in 2011-2014. This represents the only long-term sampling-bias-free study of its type conducted after the Fukushima Dai-ichi accident. For the first time in 2014, a new device called the Babyscan, which has a low $^{134/137}$Cs MDA of $< 50$ Bq/body, was used to screen the childr…
▽ More
Comprehensive whole-body counter surveys of Miharu town school children have been conducted for four consecutive years, in 2011-2014. This represents the only long-term sampling-bias-free study of its type conducted after the Fukushima Dai-ichi accident. For the first time in 2014, a new device called the Babyscan, which has a low $^{134/137}$Cs MDA of $< 50$ Bq/body, was used to screen the children shorter than 130 cm. No child in this group was found to have detectable level of radiocesium. Using the MDAs, upper limits of daily intake of radiocesium were estimated for each child. For those screened with the Babyscan, the upper intake limits were found to be <1 Bq/day for $^{137}$Cs. Analysis of a questionnaire filled out by the children's parents regarding their food and water consumption shows that the majority of Miharu children regularly consume local and/or home-grown rice and vegetables. This however does not increase the body burden.
△ Less
Submitted 13 January, 2015; v1 submitted 12 January, 2015;
originally announced January 2015.
-
Whole-body counter survey results 4 months after the Fukushima Daiichi NPP accident in Minamisoma City, Fukushima
Authors:
Ryugo S. Hayano,
Yuni Watanabe,
Shuhei Nomura,
Tsuyoshi Nemoto,
Masaharu Tsubokura,
Tatsuo Hanai,
Yuki Kumemoto,
Satoshi Kowata,
Tomoyoshi Oikawa,
Yukio Kanazawa
Abstract:
Using the first WBC unit installed in Fukushima Prefecture after the accident, the radiocesium body burdens of 566 high-risk residents of Minamisoma city were measured in July 2011 at the Minamisoma Municipal General Hospital. The analysis of the data was challenging because this chair-type WBC unit did not have sufficient shielding against background gamma rays, and methods had to be developed to…
▽ More
Using the first WBC unit installed in Fukushima Prefecture after the accident, the radiocesium body burdens of 566 high-risk residents of Minamisoma city were measured in July 2011 at the Minamisoma Municipal General Hospital. The analysis of the data was challenging because this chair-type WBC unit did not have sufficient shielding against background gamma rays, and methods had to be developed to reliably compensate for the body-attenuated background radiation. Fortunately, data for repeated tests of hospital staff members using both the chair-type and well-shielded FASTSCAN WBC units, installed in September 2011, were available, and could be used to check the validity of the analysis. The CEDs of all subjects, estimated under the assumption of acute inhalation in March 2011, were found to be less than 1 mSv.
△ Less
Submitted 19 August, 2014;
originally announced August 2014.
