-
Numerical Simulation of Radiatively driven Transonic Relativistic Jets
Authors:
Raj Kishor Joshi,
Indranil Chattopadhyay,
Antonios Tsokaros,
Priyesh Kumar Tripathi
Abstract:
We perform the numerical simulations of axisymmetric, relativistic, optically thin jets under the influence of the radiation field of an accretion disk. We show that starting from a very low injection velocity at the base, jets can be accelerated to relativistic terminal speeds when traveling through the radiation field. The jet gains momentum through the interaction with the radiation field. We u…
▽ More
We perform the numerical simulations of axisymmetric, relativistic, optically thin jets under the influence of the radiation field of an accretion disk. We show that starting from a very low injection velocity at the base, jets can be accelerated to relativistic terminal speeds when traveling through the radiation field. The jet gains momentum through the interaction with the radiation field. We use a relativistic equation of state for multi-species plasma, which self-consistently calculates the adiabatic index for the jet material. All the jet solutions obtained are transonic in nature. In addition to the acceleration of the jet to relativistic speeds, our results show that the radiation field also acts as a collimating agent. The jets remain well collimated under the effect of radiation pressure. We also show that if the jet starts with a rotational velocity, the radiation field will reduce the angular momentum of the jet beam.
△ Less
Submitted 30 June, 2024; v1 submitted 6 June, 2024;
originally announced June 2024.
-
Multi-Physics Numerical Analysis of Single-phase Immersion Cooling for Thermal Management of Li-Ion Batteries
Authors:
Piyush Mani Tripathi,
Amy M. Marconnet
Abstract:
Battery thermal management systems (BTMSs) are critical for efficient and safe operation of lithium-ion batteries (LIBs), especially for fast charging/discharging applications that generate significant heating within the cell. Forced immersion cooling, where a dielectric fluid flows in direct contact with the LIB cells, is an effective cooling approach. But because of its complex nature, a thoroug…
▽ More
Battery thermal management systems (BTMSs) are critical for efficient and safe operation of lithium-ion batteries (LIBs), especially for fast charging/discharging applications that generate significant heating within the cell. Forced immersion cooling, where a dielectric fluid flows in direct contact with the LIB cells, is an effective cooling approach. But because of its complex nature, a thorough understanding of the underlying physics - including the coupled electrochemical, thermal, fluid, and mechanical effects - is required before immersion cooling will see wide adoption into commercial systems. In this work, to investigate the performance of a LIB subjected to forced immersion cooling, we develop a fully coupled modeling approach that solves the detailed electrochemical model in conjunction with the thermal-fluid transport models for both the cell and fluid domain. After calculating the electrochemical and thermal responses, we also estimate the mechanical stresses within the cell generated due to the ion diffusion and temperature rise that impact reliability. To assess the effectiveness of forced immersion cooling, we evaluate several different configurations for a cylindrical 18650 battery cell under varying cell discharge rates. We compare forced immersion cooling for two liquids (deionized water and mineral oil) at three different fluid mass flow rates. The results highlight the strong cross-coupling of the electrochemical and heat transfer phenomena. By comparing results across fluids and flow rates, we define a new metric that can be used to compare the cooling capacity considering different flow parameters. Overall, this study provides insights that will be useful in the design of immersion cooling-based BTMSs including, for example, the selection of forced immersion cooling specifications, such that the temperature is controlled without significant capacity loss.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Interpretable Multimodal Learning for Cardiovascular Hemodynamics Assessment
Authors:
Prasun C Tripathi,
Sina Tabakhi,
Mohammod N I Suvon,
Lawrence Schöb,
Samer Alabed,
Andrew J Swift,
Shuo Zhou,
Hai** Lu
Abstract:
Pulmonary Arterial Wedge Pressure (PAWP) is an essential cardiovascular hemodynamics marker to detect heart failure. In clinical practice, Right Heart Catheterization is considered a gold standard for assessing cardiac hemodynamics while non-invasive methods are often needed to screen high-risk patients from a large population. In this paper, we propose a multimodal learning pipeline to predict PA…
▽ More
Pulmonary Arterial Wedge Pressure (PAWP) is an essential cardiovascular hemodynamics marker to detect heart failure. In clinical practice, Right Heart Catheterization is considered a gold standard for assessing cardiac hemodynamics while non-invasive methods are often needed to screen high-risk patients from a large population. In this paper, we propose a multimodal learning pipeline to predict PAWP marker. We utilize complementary information from Cardiac Magnetic Resonance Imaging (CMR) scans (short-axis and four-chamber) and Electronic Health Records (EHRs). We extract spatio-temporal features from CMR scans using tensor-based learning. We propose a graph attention network to select important EHR features for prediction, where we model subjects as graph nodes and feature relationships as graph edges using the attention mechanism. We design four feature fusion strategies: early, intermediate, late, and hybrid fusion. With a linear classifier and linear fusion strategies, our pipeline is interpretable. We validate our pipeline on a large dataset of $2,641$ subjects from our ASPIRE registry. The comparative study against state-of-the-art methods confirms the superiority of our pipeline. The decision curve analysis further validates that our pipeline can be applied to screen a large population. The code is available at https://github.com/prasunc/hemodynamics.
△ Less
Submitted 6 April, 2024;
originally announced April 2024.
-
Multimodal Variational Autoencoder for Low-cost Cardiac Hemodynamics Instability Detection
Authors:
Mohammod N. I. Suvon,
Prasun C. Tripathi,
Wenrui Fan,
Shuo Zhou,
Xianyuan Liu,
Samer Alabed,
Venet Osmani,
Andrew J. Swift,
Chen Chen,
Hai** Lu
Abstract:
Recent advancements in non-invasive detection of cardiac hemodynamic instability (CHDI) primarily focus on applying machine learning techniques to a single data modality, e.g. cardiac magnetic resonance imaging (MRI). Despite their potential, these approaches often fall short especially when the size of labeled patient data is limited, a common challenge in the medical domain. Furthermore, only a…
▽ More
Recent advancements in non-invasive detection of cardiac hemodynamic instability (CHDI) primarily focus on applying machine learning techniques to a single data modality, e.g. cardiac magnetic resonance imaging (MRI). Despite their potential, these approaches often fall short especially when the size of labeled patient data is limited, a common challenge in the medical domain. Furthermore, only a few studies have explored multimodal methods to study CHDI, which mostly rely on costly modalities such as cardiac MRI and echocardiogram. In response to these limitations, we propose a novel multimodal variational autoencoder ($\text{CardioVAE}_\text{X,G}$) to integrate low-cost chest X-ray (CXR) and electrocardiogram (ECG) modalities with pre-training on a large unlabeled dataset. Specifically, $\text{CardioVAE}_\text{X,G}$ introduces a novel tri-stream pre-training strategy to learn both shared and modality-specific features, thus enabling fine-tuning with both unimodal and multimodal datasets. We pre-train $\text{CardioVAE}_\text{X,G}$ on a large, unlabeled dataset of $50,982$ subjects from a subset of MIMIC database and then fine-tune the pre-trained model on a labeled dataset of $795$ subjects from the ASPIRE registry. Comprehensive evaluations against existing methods show that $\text{CardioVAE}_\text{X,G}$ offers promising performance (AUROC $=0.79$ and Accuracy $=0.77$), representing a significant step forward in non-invasive prediction of CHDI. Our model also excels in producing fine interpretations of predictions directly associated with clinical features, thereby supporting clinical decision-making.
△ Less
Submitted 20 June, 2024; v1 submitted 20 March, 2024;
originally announced March 2024.
-
Exploring the Emerging Technologies within the Blockchain Landscape
Authors:
Mohammad Ali Tareq,
Piyush Tripathi,
Nurhayati Md Issa,
Mahdi H. Miraz
Abstract:
Although blockchain technology was first introduced in 2008 and materialised in 2009, the early usage of blockchain were mainly limited to financial technologies, particularly cryptocurrencies. Later, blockchain became a widespread emerging technology, utilised in multifaceted sectors and applications. In fact, various new and innovative application of blockchain and distributed ledger technologie…
▽ More
Although blockchain technology was first introduced in 2008 and materialised in 2009, the early usage of blockchain were mainly limited to financial technologies, particularly cryptocurrencies. Later, blockchain became a widespread emerging technology, utilised in multifaceted sectors and applications. In fact, various new and innovative application of blockchain and distributed ledger technologies are still continuously being researched and explored. On the other hand, smart-contracts were first introduced in 1990s, however, it did not gain enough popularity until being integrated with blockchain technologies lately. The duo lately been seen as the key to many innovations in various industries and sectors. So, we took data from 1445 blockchain-related patent documents and tried to map out the historical and current trends in patenting activities in the blockchain field. This helps us get a better grasp of how blockchain technologies are evolving and being tracked. In addition to serving as an indicator of science and technology growth, patents are also used to judge the research potential and development of a particular technology.
△ Less
Submitted 17 February, 2024;
originally announced February 2024.
-
Plasma potential sha** using end-electrodes in the Large Plasma Device
Authors:
R. Gueroult,
S. K. P. Tripathi,
F. Gaboriau,
T. R. Look,
N. J. Fisch
Abstract:
We perform experiments in the Large Plasma Device (LAPD) at the University of California, Los Angeles, studying how different end-electrode biasing schemes modify the radial potential profile in the machine. We impose biasing profiles of different polarities and gradient signs on a set of five concentric electrodes placed 12 m downstream from the plasma source. We find that imposing concave-down p…
▽ More
We perform experiments in the Large Plasma Device (LAPD) at the University of California, Los Angeles, studying how different end-electrode biasing schemes modify the radial potential profile in the machine. We impose biasing profiles of different polarities and gradient signs on a set of five concentric electrodes placed 12 m downstream from the plasma source. We find that imposing concave-down profiles (negative potential radial gradient) on the electrodes create radial potential profiles halfway up the plasma column that are comparable to those imposed on the electrodes, regardless of the biasing polarity. On the other hand, imposing concave-up profiles (positive potential radial gradient) leads to non-monotonic radial potential profiles. This observation can be explained by the current drawn through the electrodes and the parallel plasma resistivity, highlighting their important role in controlling the rotation of plasma. Concave-down plasma potential profiles, obtained by drawing electrons on the axis, are predicted to drive azimuthal drift velocities that can approach significant fractions of the ion sound speed in the central region of the plasma column.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Online Poker and Rummy -- Games of Skill or Chance?
Authors:
Taranjit Kaur,
Manas Pati Tripathi,
Ashirbad Samantaray,
Tapan K. Gandhi
Abstract:
The paper aims to investigate the degree of cognitive skills required for success in online versions of the popular card game rummy and poker. The study focuses on analyzing the impact of experience and learnable skills on success in the online card game. We also propose a framework to analyze online games to conclude on whether they are games of learnable skill or are they games of chance. The hy…
▽ More
The paper aims to investigate the degree of cognitive skills required for success in online versions of the popular card game rummy and poker. The study focuses on analyzing the impact of experience and learnable skills on success in the online card game. We also propose a framework to analyze online games to conclude on whether they are games of learnable skill or are they games of chance. The hypotheses proposed aim to test whether online and offline card games are comparable in terms of cognitive engagement and skill requirements. To assess these hypotheses, key elements of gameplay such as shuffling of cards, card deck randomness, and seating of players are analyzed. We also adopted statistical approaches to understand the characteristics of card games in terms of random chance or skill. From the analysis, we could see that the normality of the derived variables deviates significantly from the normal distribution showing a non-linear trend. It signifies that the mean of the involved skill variables is not zero as the user plays a greater number of games, thereby strengthening the assumption that the long-term success in online card games is attributed to skill and not chance. There is no difference in online and offline versions of card games (rummy and poker) from the perspective of requirement of skills. Moreover, our finding suggests that there is a preponderance of skills to succeed in online card gaming. Overall, the findings of this research contribute to a better understanding of cognitive skills in online gaming environments.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
A New Paradigm Integrating the Concepts of Particle Abrasion and Breakage
Authors:
Priya Tripathi,
Seung Jae Lee,
Moochul Shin,
Chang Hoon Lee
Abstract:
This paper introduces a new paradigm that integrates the concepts of particle abrasion and breakage. Both processes can co-occur under loading as soil particles are subjected to friction as well as collisions between particles. Therefore, the significance of this integrating paradigm lies in its ability to address both abrasion and breakage in a single framework. The new paradigm is mapped out in…
▽ More
This paper introduces a new paradigm that integrates the concepts of particle abrasion and breakage. Both processes can co-occur under loading as soil particles are subjected to friction as well as collisions between particles. Therefore, the significance of this integrating paradigm lies in its ability to address both abrasion and breakage in a single framework. The new paradigm is mapped out in a framework called the 'particle geometry space.' The x-axis corresponds to the surface-area-to-volume ratio ($A/V$), while the y-axis represents volume ($V$). This space facilitates a holistic characterization of the four-particle geometry features, i.e., shape ($β$) and size ($D$) as well as surface area ($A$) and volume ($V$). Three distinct paths (abrasion, breakage, and equally-occurring abrasion and breakage processes), three limit lines (breakage line, sphere line, and average shape-conserving line), and five different zones are defined in the particle geometry space. Consequently, this approach enables us to systematically relate the extent of co-occurring abrasion and breakage to the particle geometry evolution.
△ Less
Submitted 3 September, 2023; v1 submitted 7 June, 2023;
originally announced June 2023.
-
Towards Fairness in Personalized Ads Using Impression Variance Aware Reinforcement Learning
Authors:
Aditya Srinivas Timmaraju,
Mehdi Mashayekhi,
Mingliang Chen,
Qi Zeng,
Quintin Fettes,
Wesley Cheung,
Yihan Xiao,
Manojkumar Rangasamy Kannadasan,
Pushkar Tripathi,
Sean Gahagan,
Miranda Bogen,
Rob Roudani
Abstract:
Variances in ad impression outcomes across demographic groups are increasingly considered to be potentially indicative of algorithmic bias in personalized ads systems. While there are many definitions of fairness that could be applicable in the context of personalized systems, we present a framework which we call the Variance Reduction System (VRS) for achieving more equitable outcomes in Meta's a…
▽ More
Variances in ad impression outcomes across demographic groups are increasingly considered to be potentially indicative of algorithmic bias in personalized ads systems. While there are many definitions of fairness that could be applicable in the context of personalized systems, we present a framework which we call the Variance Reduction System (VRS) for achieving more equitable outcomes in Meta's ads systems. VRS seeks to achieve a distribution of impressions with respect to selected protected class (PC) attributes that more closely aligns the demographics of an ad's eligible audience (a function of advertiser targeting criteria) with the audience who sees that ad, in a privacy-preserving manner. We first define metrics to quantify fairness gaps in terms of ad impression variances with respect to PC attributes including gender and estimated race. We then present the VRS for re-ranking ads in an impression variance-aware manner. We evaluate VRS via extensive simulations over different parameter choices and study the effect of the VRS on the chosen fairness metric. We finally present online A/B testing results from applying VRS to Meta's ads systems, concluding with a discussion of future work. We have deployed the VRS to all users in the US for housing ads, resulting in significant improvement in our fairness metric. VRS is the first large-scale deployed framework for pursuing fairness for multiple PC attributes in online advertising.
△ Less
Submitted 8 June, 2023; v1 submitted 5 June, 2023;
originally announced June 2023.
-
Far-Ultraviolet Spectroscopy Of Active Galactic Nuclei With AstroSat/UVIT
Authors:
Shrabani Kumar,
G. C. Dewangan,
K. P. Singh,
P. Gandhi,
I. E. Papadakis,
P. Tripathi,
L. Mallick
Abstract:
$\require{mediawiki-texvc}$ We study accretion disk emission from eight Seyfert $1 - 1.5$ active galactic nuclei (AGN) using far ultra-violet ($1300-1800$ $Å…
▽ More
$\require{mediawiki-texvc}$ We study accretion disk emission from eight Seyfert $1 - 1.5$ active galactic nuclei (AGN) using far ultra-violet ($1300-1800$ $Å$) slit-less grating spectra acquired with AstroSat/UVIT. We correct for the Galactic and intrinsic extinction, contamination from the host galaxies, narrow and broad-line regions, Fe II emission and Balmer continuum, and derive the intrinsic continua. We use HST COS/FOS spectra to account for the emission/absorption lines in the low-resolution UVIT spectra. We find generally redder power-law ($f_ν\propto ν^α$) slopes ($α\sim -1.1 - 0.3$) in the far UV band than predicted by the standard accretion disk model in the optical/UV band. We fit accretion disk models such as the multi-temperature disk blackbody ($\texttt{DISKBB}$) and relativistic disk ($\texttt{ZKERRBB}$, $\texttt{OPTXAGNF}$) models to the observed intrinsic continuum emission. We measure the inner disk temperatures using the $\texttt{DISKBB}$ model for seven AGN. These temperatures in the range $\sim 3.6-5.8$ eV are lower than the peak temperatures predicted for standard disks around maximally spinning super-massive black holes accreting at Eddington rates. The inner disks in two AGN, NGC 7469 and Mrk 352, appear to be truncated at $\sim 35-125r_{g}$ and $50-135r_{g}$, respectively. While our results show that the intrinsic FUV emission from the AGN are consistent with the standard disks, it is possible that UV continua may be affected by the presence of soft X-ray excess emission, X-ray reprocessing, and thermal Comptonisation in the hot corona. Joint spectral modeling of simultaneously acquired UV/X-ray data may be necessary to further investigate the nature of accretion disks in AGN.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
Tensor-based Multimodal Learning for Prediction of Pulmonary Arterial Wedge Pressure from Cardiac MRI
Authors:
Prasun C. Tripathi,
Mohammod N. I. Suvon,
Lawrence Schobs,
Shuo Zhou,
Samer Alabed,
Andrew J. Swift,
Hai** Lu
Abstract:
Heart failure is a serious and life-threatening condition that can lead to elevated pressure in the left ventricle. Pulmonary Arterial Wedge Pressure (PAWP) is an important surrogate marker indicating high pressure in the left ventricle. PAWP is determined by Right Heart Catheterization (RHC) but it is an invasive procedure. A non-invasive method is useful in quickly identifying high-risk patients…
▽ More
Heart failure is a serious and life-threatening condition that can lead to elevated pressure in the left ventricle. Pulmonary Arterial Wedge Pressure (PAWP) is an important surrogate marker indicating high pressure in the left ventricle. PAWP is determined by Right Heart Catheterization (RHC) but it is an invasive procedure. A non-invasive method is useful in quickly identifying high-risk patients from a large population. In this work, we develop a tensor learning-based pipeline for identifying PAWP from multimodal cardiac Magnetic Resonance Imaging (MRI). This pipeline extracts spatial and temporal features from high-dimensional scans. For quality control, we incorporate an epistemic uncertainty-based binning strategy to identify poor-quality training samples. To improve the performance, we learn complementary information by integrating features from multimodal data: cardiac MRI with short-axis and four-chamber views, and Electronic Health Records. The experimental analysis on a large cohort of $1346$ subjects who underwent the RHC procedure for PAWP estimation indicates that the proposed pipeline has a diagnostic value and can produce promising performance with significant improvement over the baseline in clinical practice (i.e., $Δ$AUC $=0.10$, $Δ$Accuracy $=0.06$, and $Δ$MCC $=0.39$). The decision curve analysis further confirms the clinical utility of our method.
△ Less
Submitted 6 April, 2024; v1 submitted 13 March, 2023;
originally announced March 2023.
-
CoRTX: Contrastive Framework for Real-time Explanation
Authors:
Yu-Neng Chuang,
Guanchu Wang,
Fan Yang,
Quan Zhou,
Pushkar Tripathi,
Xuanting Cai,
Xia Hu
Abstract:
Recent advancements in explainable machine learning provide effective and faithful solutions for interpreting model behaviors. However, many explanation methods encounter efficiency issues, which largely limit their deployments in practical scenarios. Real-time explainer (RTX) frameworks have thus been proposed to accelerate the model explanation process by learning a one-feed-forward explainer. E…
▽ More
Recent advancements in explainable machine learning provide effective and faithful solutions for interpreting model behaviors. However, many explanation methods encounter efficiency issues, which largely limit their deployments in practical scenarios. Real-time explainer (RTX) frameworks have thus been proposed to accelerate the model explanation process by learning a one-feed-forward explainer. Existing RTX frameworks typically build the explainer under the supervised learning paradigm, which requires large amounts of explanation labels as the ground truth. Considering that accurate explanation labels are usually hard to obtain due to constrained computational resources and limited human efforts, effective explainer training is still challenging in practice. In this work, we propose a COntrastive Real-Time eXplanation (CoRTX) framework to learn the explanation-oriented representation and relieve the intensive dependence of explainer training on explanation labels. Specifically, we design a synthetic strategy to select positive and negative instances for the learning of explanation. Theoretical analysis show that our selection strategy can benefit the contrastive learning process on explanation tasks. Experimental results on three real-world datasets further demonstrate the efficiency and efficacy of our proposed CoRTX framework.
△ Less
Submitted 5 March, 2023;
originally announced March 2023.
-
Optimal error analysis of a non-uniform IMEX-L1 finite element method for time fractional PDEs and PIDEs
Authors:
Aditi Tomar,
Lok Pati Tripathi,
Amiya K. Pani
Abstract:
Stability and optimal convergence analysis of a non-uniform implicit-explicit L1 finite element method (IMEX-L1-FEM) is studied for a class of time-fractional linear partial differential/integro-differential equations with non-self-adjoint elliptic part having (space-time) variable coefficients. The proposed scheme is based on a combination of an IMEX-L1 method on graded mesh in the temporal direc…
▽ More
Stability and optimal convergence analysis of a non-uniform implicit-explicit L1 finite element method (IMEX-L1-FEM) is studied for a class of time-fractional linear partial differential/integro-differential equations with non-self-adjoint elliptic part having (space-time) variable coefficients. The proposed scheme is based on a combination of an IMEX-L1 method on graded mesh in the temporal direction and a finite element method in the spatial direction. With the help of a discrete fractional Grönwall inequality, global almost optimal error estimates in $L^2$- and $H^1$-norms are derived for the problem with initial data $u_0 \in H_0^1(Ω)\cap H^2(Ω)$. The novelty of our approach is based on managing the interaction of the L1 approximation of the fractional derivative and the time discrete elliptic operator to derive the optimal estimate in $H^1$-norm directly. Furthermore, a super convergence result is established when the elliptic operator is self-adjoint with time and space varying coefficients, and as a consequence, an $L^\infty$ error estimate is obtained for 2D problems that too with the initial condition is in $ H_0^1(Ω)\cap H^2(Ω)$. All results proved in this paper are valid uniformly as $α\longrightarrow 1^{-}$, where $α$ is the order of the Caputo fractional derivative. Numerical experiments are presented to validate our theoretical findings.
△ Less
Submitted 18 March, 2024; v1 submitted 10 February, 2023;
originally announced February 2023.
-
Ecological system with fear induced group defence and prey refuge
Authors:
Shivam Yadav,
Jai Prakash Tripathi,
Shrichand Bhuria,
Satish Kumar Tiwari,
Deepak Tripathi,
Vandana Tiwari,
Ranjit Kumar Upadhyay,
Yun Kang
Abstract:
In this study, we investigate the dynamics of a spatial and non spatial prey-predator interaction model that includes the following: (i) fear effect incorporated in prey birth rate; (ii) group defence of prey against predators; and (iii) prey refuge. We provide comprehensive mathematical analysis of extinction and persistence scenarios for both prey and predator species. To better explore the dyna…
▽ More
In this study, we investigate the dynamics of a spatial and non spatial prey-predator interaction model that includes the following: (i) fear effect incorporated in prey birth rate; (ii) group defence of prey against predators; and (iii) prey refuge. We provide comprehensive mathematical analysis of extinction and persistence scenarios for both prey and predator species. To better explore the dynamics of the system, a thorough investigation of bifurcation analysis has been performed using fear level, prey birth rate, and prey death rate caused by intra-prey competition as bifurcation parameter. All potential occurrences of bi-stability dynamics have also been investigated for some relevant sets of parametric values. Our numerical evaluations show that high levels of fear can stabilize the prey-predator system by ruling out the possibility of periodic solutions. Also, our model Hopf bifurcation is subcritical in contrast to traditional prey-predator models, which ignore the cost of fear and have supercritical Hopf bifurcations in general. In contrast to the general trend, predator species go extinct at higher values of prey birth rates. We have also found that, contrary to the typical tendency for prey species to go extinct, both prey and predator populations may coexist in the system as intra-prey competition level grows noticeably. The stability and Turing instability of associated spatial model have also been investigated analytically. We also perform the numerical simulation to observe the effect of different parameters on the density distribution of species. Different types of spatiotemporal patterns like spot, mixture of spots and stripes have been observed via variation of time evolution, diffusion coefficient of predator population, level of fear factor and prey refuge. The fear level parameter (k) has a great impact on the spatial dynamics of model system.
△ Less
Submitted 4 November, 2023; v1 submitted 9 February, 2023;
originally announced February 2023.
-
Multi-wavelength study of NGC 1365: The obscured active nucleus and off-nuclear compact X-ray sources
Authors:
Subhashree Swain,
Gulab Chand Dewangan,
P. Shalima,
Prakash Tripathi,
K . V. P. Latha
Abstract:
We present a multi-wavelength study of the active nucleus and the off-nuclear X-ray sources in the nearby spiral galaxy, NGC 1365 using three simultaneous UV/X-ray observations by AstroSat over a two months period and archival IR observations performed with Spitzer and Herschel. Utilising the data from the Soft X-ray Telescope (SXT) on-board AstroSat, we find spectral variability mainly caused by…
▽ More
We present a multi-wavelength study of the active nucleus and the off-nuclear X-ray sources in the nearby spiral galaxy, NGC 1365 using three simultaneous UV/X-ray observations by AstroSat over a two months period and archival IR observations performed with Spitzer and Herschel. Utilising the data from the Soft X-ray Telescope (SXT) on-board AstroSat, we find spectral variability mainly caused by the variation in the X-ray column density, (N$_H$ $\sim$ 10$^{22}$ - 10$^{23}$ cm$^{-2}$). With the accurate spatial resolution of the UVIT onboard AstroSat, we separate the intrinsic AGN flux from the host galaxy emission and then correct for the Galactic and the internal reddening. We detect no significant variation in the NUV emission over the observation period. The AGN in FUV band is undetectable due to heavy intrinsic extinction. Further, the multi-wavelength IR/UV/X-ray AGN SED reveals that the AGN is in a low luminosity phase with accretion rate $\sim$ 0.01 L$_{Edd}$. The steady UV emission and strong X-ray absorption variability suggest that the obscuring clouds are likely compact and affect the compact X-ray source only and do not possibly cover the extended UV emitting region. In addition, the UVIT is able to resolve two bright spots at a radius of 7" ($\sim$ 6.3 Kpc) from the central nucleus in the South-West (SW) direction. In the UVIT image of the entire galaxy, we identify UV counterparts to four Chandra identified bright X-ray sources. One well-known ultra-luminous X-ray source (ULX) NGC 1365 X2 is identified with its UV counterpart at 86" from the nucleus in the north-east (NE) direction from the active nucleus.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Assessing potential insights of an imperfect testing strategy: Parameter estimation and practical identifiability using early COVID-19 data in India
Authors:
Sarita Bugalia,
Jai Prakash Tripathi
Abstract:
A deterministic model with testing of infected individuals has been proposed to investigate the potential consequences of the impact of testing strategy. The model exhibits global dynamics concerning the disease-free and a unique endemic equilibrium depending on the basic reproduction number when the recruitment of infected individuals is zero; otherwise, the model does not have a disease-free equ…
▽ More
A deterministic model with testing of infected individuals has been proposed to investigate the potential consequences of the impact of testing strategy. The model exhibits global dynamics concerning the disease-free and a unique endemic equilibrium depending on the basic reproduction number when the recruitment of infected individuals is zero; otherwise, the model does not have a disease-free equilibrium, and disease never dies out in the community. Model parameters have been estimated using the maximum likelihood method with respect to the data of early COVID-19 outbreak in India. The practical identifiability analysis shows that the model parameters are estimated uniquely. The consequences of the testing rate for the weekly new cases of early COVID-19 data in India tell that if the testing rate is increased by 20% and 30% from its baseline value, the weekly new cases at the peak are decreased by 37.63% and 52.90%; and it also delayed the peak time by four and fourteen weeks, respectively. Similar findings are obtained for the testing efficacy that if it is increased by 12.67% from its baseline value, the weekly new cases at the peak are decreased by 59.05% and delayed the peak by 15 weeks. Therefore, a higher testing rate and efficacy reduce the disease burden by tumbling the new cases, representing a real scenario. It is also obtained that the testing rate and efficacy reduce the epidemic's severity by increasing the final size of the susceptible population. The testing rate is found more significant if testing efficacy is high. Global sensitivity analysis using partial rank correlation coefficients (PRCCs) and Latin hypercube sampling (LHS) determine the key parameters that must be targeted to worsen/contain the epidemic.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Accelerating Shapley Explanation via Contributive Cooperator Selection
Authors:
Guanchu Wang,
Yu-Neng Chuang,
Mengnan Du,
Fan Yang,
Quan Zhou,
Pushkar Tripathi,
Xuanting Cai,
Xia Hu
Abstract:
Even though Shapley value provides an effective explanation for a DNN model prediction, the computation relies on the enumeration of all possible input feature coalitions, which leads to the exponentially growing complexity. To address this problem, we propose a novel method SHEAR to significantly accelerate the Shapley explanation for DNN models, where only a few coalitions of input features are…
▽ More
Even though Shapley value provides an effective explanation for a DNN model prediction, the computation relies on the enumeration of all possible input feature coalitions, which leads to the exponentially growing complexity. To address this problem, we propose a novel method SHEAR to significantly accelerate the Shapley explanation for DNN models, where only a few coalitions of input features are involved in the computation. The selection of the feature coalitions follows our proposed Shapley chain rule to minimize the absolute error from the ground-truth Shapley values, such that the computation can be both efficient and accurate. To demonstrate the effectiveness, we comprehensively evaluate SHEAR across multiple metrics including the absolute error from the ground-truth Shapley value, the faithfulness of the explanations, and running speed. The experimental results indicate SHEAR consistently outperforms state-of-the-art baseline methods across different evaluation metrics, which demonstrates its potentials in real-world applications where the computational resource is limited.
△ Less
Submitted 6 March, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Thomson scattering on the Large Plasma Device
Authors:
Sofiya Ghazaryan,
Marietta Kaloyan,
Walter Gekelman,
Zoltan Lucky,
Stephen Vincena,
Shreekrishna P. Tripathi,
1 Patrick Pribyl,
Christoph Niemann
Abstract:
We have developed a non-collective Thomson scattering diagnostic for measurements of electron density and temperature on the Large Plasma Device. A triple grating spectrometer with a tunable notch filter is used to discriminate the faint scattering signal from the stray light. In this paper we describe the diagnostic and its calibration via Raman scattering, and present the first measurements perf…
▽ More
We have developed a non-collective Thomson scattering diagnostic for measurements of electron density and temperature on the Large Plasma Device. A triple grating spectrometer with a tunable notch filter is used to discriminate the faint scattering signal from the stray light. In this paper we describe the diagnostic and its calibration via Raman scattering, and present the first measurements performed with the fully commissioned system. Depending on the discharge conditions, the measured densities and temperatures range from 4.0$\times$10$^{12}$ cm$^{-3}$ to 2.8$\times$10$^{13}$ cm$^{-3}$, and from 1.2 eV to 6.8 eV, respectively. The variation of the measurement error with plasma parameters and discharges averaged is also discussed.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
Thermal Comptonization in a changing corona in the changing-look active galaxy NGC 1566
Authors:
Prakash Tripathi,
Gulab C. Dewangan
Abstract:
We present broadband UV/X-ray spectral variability of the changing-look active galactic nucleus NGC 1566 based on simultaneous near-ultraviolet (NUV) and X-ray observations performed by XMM-Newton, Swift, and NuSTAR satellites at five different epochs during the declining phase of the 2018 outburst. We found that the accretion disk, soft X-ray excess, and the X-ray power-law components were extrem…
▽ More
We present broadband UV/X-ray spectral variability of the changing-look active galactic nucleus NGC 1566 based on simultaneous near-ultraviolet (NUV) and X-ray observations performed by XMM-Newton, Swift, and NuSTAR satellites at five different epochs during the declining phase of the 2018 outburst. We found that the accretion disk, soft X-ray excess, and the X-ray power-law components were extremely variable. Additionally, the X-ray power-law flux was correlated with both the soft excess plus disk and the pure disk fluxes. Our finding shows that at high flux levels the soft X-ray excess and the disk emission both provided the seed photons for thermal Comptonization in the hot corona, whereas at low flux levels where the soft excess was absent, the pure disk emission alone provided the seed photons. The X-ray power-law photon-index was only weakly variable ($Δ{Γ_{hot}}\leq0.06$) and it was not well correlated with the X-ray flux over the declining timescale. On the other hand, we found that the electron temperature of the corona increased from $\sim22$ to $\sim200$ keV with decreasing number of seed photons from June 2018 to August 2019. At the same time, the optical depth of the corona decreased from $τ_{hot}\sim4$ to $\sim0.7$, and the scattering fraction increased from $\sim1\%$ to $\sim10\%$. These changes suggest structural changes in the hot corona such that it grew in size and became hotter with decreasing accretion rate during the declining phase. The AGN is most likely evolving with decreasing accretion rate towards a state similar to the low/hard state of black hole X-ray binaries.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Deciphering dynamics of recent COVID-19 outbreak in India: An age-structured modeling
Authors:
Vijay Pal Bajiya,
Jai Prakash Tripathi,
Ranjit Kumar Upadhyay
Abstract:
Infectious disease transmission dynamics are particularly sensitive to social contact patterns, and the precautions people take to limit disease transmission. It depends on the age distribution of the community. Thus, knowing the age$-$specific prevalence and incidence of infectious diseases is critical for predicting future disease burden and the efficacy of interventions like immunization. This…
▽ More
Infectious disease transmission dynamics are particularly sensitive to social contact patterns, and the precautions people take to limit disease transmission. It depends on the age distribution of the community. Thus, knowing the age$-$specific prevalence and incidence of infectious diseases is critical for predicting future disease burden and the efficacy of interventions like immunization. This study uses an SEIR age$-$structured multi-group epidemic model to understand how social contact affects disease control. We created location$-$specific social contact matrices in the community to see how social mixing has affected illness spread. We estimated the basic reproduction number $(R_0)$ of the system and plotted its global behavior in terms of $R_0$. Optimal control for the problem has also been established quantitatively. The proposed model's transmission rate for India from September 1, 2020, to December 31, 2020, has also been estimated. We replicated the lifting of non-pharmaceutical therapies by allowing participants to return to work in phases and studied the impact of this. Our findings imply that identifying symptomatic sick people aged $20-49$ can help lower the number of infected people when schools are closed. When some schools are partially open, awareness of symptomatic infected persons helps reduce cases. The simulation results also suggest that limiting contact at school and other meeting areas could significantly lower the number of instances. Using the least square approach, it was discovered that the time$-$dependent transmission rate is more realistic than the constant spread rate for COVID$-19$ in India. To reduce the COVID$-19$ in burden, we found that gradually loosening control methods could flatten and lower other peaks. Our findings may help health policymakers decide on timely age$-$based immunization distribution strategies and hence control the disease.
△ Less
Submitted 17 April, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Determining ultrafast carrier dynamics of hybrid perovskites at various stages of nucleation and growth kinetics
Authors:
Bibek S. Dhami,
Ravi P. N. Tripathi,
David J. Hoxie,
Kannatassen Appavoo
Abstract:
With hybrid organic-inorganic perovskites increasing its technological reach, from photovoltaics solar cells to light-emitting devices, to nanoscale transistors, it is critical to establish the role of microstructures in dictating how carrier dynamics dictate device efficiency. Here we report on the ultrafast dynamics of charge carriers in hybrid perovskites at various stages of nucleation and gro…
▽ More
With hybrid organic-inorganic perovskites increasing its technological reach, from photovoltaics solar cells to light-emitting devices, to nanoscale transistors, it is critical to establish the role of microstructures in dictating how carrier dynamics dictate device efficiency. Here we report on the ultrafast dynamics of charge carriers in hybrid perovskites at various stages of nucleation and growth kinetics. A solution-processed fabrication technique, with spin-coating conditions optimized to control the nucleation density of an intermediate phase, converts to hybrid perovskites upon a temperature gradient annealing. This strategy decouples the nucleation and growth steps that lead eventually to large-grain thin films, allowing us to probe electronic and carrier dynamic differences. We find, surprisingly, that the nucleating microcrystals already display the electronic properties of hybrid perovskites and share similar femtosecond-to-nanosecond dynamics as large-grain hybrid perovskite thin films.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Angle-Resolved Cathodoluminescence Polarimetry of Hybrid Perovskites
Authors:
Bibek S. Dhami,
Vasudevan Iyer,
Aniket Pant,
Ravi P. N. Tripathi,
Benjamin J. Lawrie,
Kannatassen Appavoo
Abstract:
Coupling between light and matter strongly depends on the polarization of the electromagnetic field and the nature of the excitations in the material. As hybrid perovskites emerge as a promising class of materials for light-based technologies like LEDs, lasers, and photodetectors, understanding the microscopic details of how photons couple to matter is critical. While most optical studies have foc…
▽ More
Coupling between light and matter strongly depends on the polarization of the electromagnetic field and the nature of the excitations in the material. As hybrid perovskites emerge as a promising class of materials for light-based technologies like LEDs, lasers, and photodetectors, understanding the microscopic details of how photons couple to matter is critical. While most optical studies have focused on the spectral content and quantum efficiency of emitted photons in various hybrid perovskite thin-film and nanoscale structures, few studies have explored other properties of the emitted photons such as polarization and emission angle. Here, we use angle-resolved cathodoluminescence microscopy to access the full polarization state of photons emitted from large-grain hybrid perovskite films with spatial resolution well below the optical diffraction limit. Map** the Stokes parameters as a function of the emission angle in a thin film, we reveal the effect of a grain boundary on the degree of polarization and angle at which the photons are emitted. This exploration of angle- and polarization-resolved emission near grain boundaries provides an improved understanding of the emission properties of hybrid perovskites in thin film geometries -- a necessary investigation for subsequent engineering of subwavelength nanophotonic structures using the hybrid perovskite class of materials.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
Mutations make pandemics worse or better: modeling SARS-CoV-2 variants and imperfect vaccination
Authors:
Sarita Bugalia,
Jai Prakash Tripathi,
Hao Wang
Abstract:
Since December 2020, variants of COVID-19 (especially Delta and Omicron) appeared with different characteristics that influenced death and transmissibility emerged around the world. To address the novel dynamics of the disease, we propose a dynamical model of two strains, namely native and mutant, transmission dynamics with mutation and imperfect vaccination. It is also assumed that the recuperate…
▽ More
Since December 2020, variants of COVID-19 (especially Delta and Omicron) appeared with different characteristics that influenced death and transmissibility emerged around the world. To address the novel dynamics of the disease, we propose a dynamical model of two strains, namely native and mutant, transmission dynamics with mutation and imperfect vaccination. It is also assumed that the recuperated individuals from the native strain can be infected with mutant strain through the direct contact with individual or contaminated surfaces or aerosols. We compute the basic reproduction number for each strain independently and take the maximum for $R_0$. We prove the nonexistence of backward bifurcation using the center manifold theory, and global stability of disease-free equilibrium when the basic reproduction number $R_0<1. An intermediate mutation rate $ν_1$ leads to oscillations. When $ν_1$ increases over a threshold, the system regains its stability and exhibits an interesting dynamics called endemic bubble. An analytical expression for vaccine-induced herd immunity is derived. The model is parameterized using the Indian data of the cumulative number of confirmed cases and deaths of COVID-19 from March 1 to September 27 in 2021, using MCMC method. The cumulative cases and deaths can be reduced by increasing the vaccine efficacies to both native and mutant strains. We observe that by considering the vaccine efficacy to native strain as 90\%, the cumulative cases and deaths would be reduced by 3.27\% and 5.2\%, respectively; and by considering the vaccine efficacy to mutant strain as 90\%, the cumulative cases and deaths would be reduced by 0.9\% and 2.5\%, respectively. Our study demonstrates that the COVID-19 pandemic may be worse due to the occurrence of oscillations for certain mutation rates but better due to stability at a lower infection level with a larger mutation rate.
△ Less
Submitted 17 January, 2022;
originally announced January 2022.
-
AstroSat view of the newly discovered X-ray transient MAXI~J1803--298 in the Hard-intermediate state
Authors:
Swadesh Chand,
G. C. Dewangan,
Parijat Thakur,
Prakash Tripathi,
V. K. Agrawal
Abstract:
We perform comprehensive temporal and spectral analysis of the newly discovered X-ray transient MAXI~J1803--298 using an AstroSat target of opportunity observation on May 11, 2021 during its outburst. The source was found to be in the hard intermediate state. We detect type C quasi-periodic oscillations (QPOs) at the frequencies of $\sim5.4$ Hz and $\sim6.3$ Hz along with a sub-harmonic at…
▽ More
We perform comprehensive temporal and spectral analysis of the newly discovered X-ray transient MAXI~J1803--298 using an AstroSat target of opportunity observation on May 11, 2021 during its outburst. The source was found to be in the hard intermediate state. We detect type C quasi-periodic oscillations (QPOs) at the frequencies of $\sim5.4$ Hz and $\sim6.3$ Hz along with a sub-harmonic at $\sim2.8$ Hz in the $3-15$ keV band. The frequency and fractional rms amplitude of the QPO in the $15-30$ keV band are found to be higher than those in the $3-15$ keV band. We find soft lags of $\sim3.8$ ms and $\sim6.8$ ms for the respective QPOs at $\sim5.4$ Hz and $\sim6.3$ Hz, whereas soft lag of $\sim4.7$ ms is found at the sub-harmonic frequency. The increase in the soft lags at the QPO frequencies with energy is also observed in other black hole transients and is attributed to the inclination dependence of the lags. The rms-energy spectra indicate the power-law component to be more variable than the disk and the reflection components. We find a broad iron line with an equivalent width of $\sim0.17-0.19$ keV and a reflection hump above $\sim12$ keV in the energy spectrum. Based on the X-ray spectroscopy and considering the distance to the source as 8 kpc, the estimated mass ($\sim8.5-16$ M$_\odot$) and spin ($a\gtrsim0.7$) of the black hole suggest that the source is likely to be a stellar mass Kerr black hole X-ray binary.
△ Less
Submitted 15 May, 2022; v1 submitted 7 December, 2021;
originally announced December 2021.
-
AstroSat view of spectral transition in the changing-look active galaxy NGC1566 during the declining phase of the 2018 outburst
Authors:
Prakash Tripathi,
Gulab C. Dewangan
Abstract:
NGC1566 is a changing-look active galaxy that exhibited an outburst during 2017-2018 with a peak in June 2018. We triggered AstroSat observations of NGC 1566 twice in August and October 2018 during its declining phase. Using the AstroSat observations along-with two XMM-Newton observations in 2015 (pre-outburst) and June 2018 (peak-outburst), we found that the X-ray power-law, the soft X-ray excess…
▽ More
NGC1566 is a changing-look active galaxy that exhibited an outburst during 2017-2018 with a peak in June 2018. We triggered AstroSat observations of NGC 1566 twice in August and October 2018 during its declining phase. Using the AstroSat observations along-with two XMM-Newton observations in 2015 (pre-outburst) and June 2018 (peak-outburst), we found that the X-ray power-law, the soft X-ray excess, and the disk components showed extreme variability during the outburst. Especially, the soft excess was negligible in 2015 before the outburst, it increased to a maximum level by a factor of $>200$ in June 2018, and reduced dramatically by a factor of $\sim7.4$ in August 2018 and become undetectable in October 2018. The Eddington fraction ($L/L_{Edd})$ increased from $\sim0.1\%$ (2015) to $\sim 5\%$ (June 2018), then decreased to $\sim 1.5\%$ (August 2018) and $0.3\%$ (October 2018). Thus, NGC 1566 made a spectral transition from a high soft-excess state to a negligible soft-excess state at a few $\%$ of the Eddington rate. The soft-excess is consistent with warm Comptonization in the inner disk that appears to have developed during the outburst and disappeared towards the end of the outburst over a timescale comparable to the sound crossing time. The multi-wavelength spectral evolution of NGC 1566 during the outburst is most likely caused by the radiation pressure instability in the inner regions of the accretion disk in NGC 1566.
△ Less
Submitted 17 November, 2021; v1 submitted 16 November, 2021;
originally announced November 2021.
-
Phenotypic Trait of Particle Geometries
Authors:
Seung Jae Lee,
Moochul Shin,
Chang Hoon Lee,
Priya Tripathi
Abstract:
People of a race appear different but share a 'phenotypic trait' due to a common genetic origin. Mineral particles are like humans: they appear different despite having a same geological origin. Then, do the particles have some sort of 'phenotypic trait' in the geometries as we do? How can we characterize the phenotypic trait of particle geometries? This paper discusses a new perspective on how th…
▽ More
People of a race appear different but share a 'phenotypic trait' due to a common genetic origin. Mineral particles are like humans: they appear different despite having a same geological origin. Then, do the particles have some sort of 'phenotypic trait' in the geometries as we do? How can we characterize the phenotypic trait of particle geometries? This paper discusses a new perspective on how the phenotypic trait can be discovered in the particle geometries and how the 'variation' and 'average' of the geometry can be quantified. The key idea is using the power-law between particle surface-area-to-volume ratio ($A/V$) and the particle volume ($V$) that uncovers the phenotypic trait in terms of $α$ and $β^*$: From the log-transformed relation of $V = (A/V)^α {\times} β^*$, the power value $α$ represents the relation between shape and size, while the term $β^*$ (evaluated by fixing $α$ = -3) informs the angularity of the average shape in the granular material. In other words, $α$ represents the 'variation' of the geometry while $β^*$ is concerned with the 'average' geometry of a granular material. Furthermore, this study finds that $A/V$ and $V$ can be also used to characterize individual particle shape in terms of Wadell's true Sphericity ($S$). This paper also revisits the $M = A/V {\times} L/6$ concept originally introduced by Su et al. (2020) and finds the shape index $M$ is an extended form of $S$ providing additional information about the particle elongation. Therefore, the proposed method using $A/V$ and $V$ provides a unified approach that can characterize the particle geometry at multiple scales from granular material to a single particle.
Ref.: Su, Y.F., Bhattacharya, S., Lee, S.J., Lee, C.H., Shin, M.: A new interpretation of three-dimensional particle geometry: M-A-V-L. Transp. Geotech. 23, 100328 (2020).
△ Less
Submitted 27 October, 2021; v1 submitted 27 October, 2021;
originally announced October 2021.
-
MTCD: Cataract Detection via Near Infrared Eye Images
Authors:
Pavani Tripathi,
Yasmeena Akhter,
Mahapara Khurshid,
Aditya Lakra,
Rohit Keshari,
Mayank Vatsa,
Richa Singh
Abstract:
Globally, cataract is a common eye disease and one of the leading causes of blindness and vision impairment. The traditional process of detecting cataracts involves eye examination using a slit-lamp microscope or ophthalmoscope by an ophthalmologist, who checks for clouding of the normally clear lens of the eye. The lack of resources and unavailability of a sufficient number of experts pose a burd…
▽ More
Globally, cataract is a common eye disease and one of the leading causes of blindness and vision impairment. The traditional process of detecting cataracts involves eye examination using a slit-lamp microscope or ophthalmoscope by an ophthalmologist, who checks for clouding of the normally clear lens of the eye. The lack of resources and unavailability of a sufficient number of experts pose a burden to the healthcare system throughout the world, and researchers are exploring the use of AI solutions for assisting the experts. Inspired by the progress in iris recognition, in this research, we present a novel algorithm for cataract detection using near-infrared eye images. The NIR cameras, which are popularly used in iris recognition, are of relatively low cost and easy to operate compared to ophthalmoscope setup for data capture. However, such NIR images have not been explored for cataract detection. We present deep learning-based eye segmentation and multitask network classification networks for cataract detection using NIR images as input. The proposed segmentation algorithm efficiently and effectively detects non-ideal eye boundaries and is cost-effective, and the classification network yields very high classification performance on the cataract dataset.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
A Web Scale Entity Extraction System
Authors:
Xuanting Cai,
Quanbin Ma,
Pan Li,
Jianyu Liu,
Qi Zeng,
Zhengkan Yang,
Pushkar Tripathi
Abstract:
Understanding the semantic meaning of content on the web through the lens of entities and concepts has many practical advantages. However, when building large-scale entity extraction systems, practitioners are facing unique challenges involving finding the best ways to leverage the scale and variety of data available on internet platforms. We present learnings from our efforts in building an entit…
▽ More
Understanding the semantic meaning of content on the web through the lens of entities and concepts has many practical advantages. However, when building large-scale entity extraction systems, practitioners are facing unique challenges involving finding the best ways to leverage the scale and variety of data available on internet platforms. We present learnings from our efforts in building an entity extraction system for multiple document types at large scale using multi-modal Transformers. We empirically demonstrate the effectiveness of multi-lingual, multi-task and cross-document type learning. We also discuss the label collection schemes that help to minimize the amount of noise in the collected data.
△ Less
Submitted 27 August, 2021;
originally announced October 2021.
-
Revealing Thermal Comptonization of accretion-disk photons in IC4329A with AstroSat
Authors:
Prakash Tripathi,
Gulab Chand Dewangan,
I. E. Papadakis,
K. P. Singh
Abstract:
We present five simultaneous UV/X-ray observations of IC4329A by AstroSat, performed over {a five-month} period. We utilize the excellent spatial resolution of the Ultra-Violet Imaging Telescope (UVIT) onboard AstroSat to reliably separate the intrinsic AGN flux from the host galaxy emission and to correct for the Galactic and internal reddening, as well as the contribution from the narrow and bro…
▽ More
We present five simultaneous UV/X-ray observations of IC4329A by AstroSat, performed over {a five-month} period. We utilize the excellent spatial resolution of the Ultra-Violet Imaging Telescope (UVIT) onboard AstroSat to reliably separate the intrinsic AGN flux from the host galaxy emission and to correct for the Galactic and internal reddening, as well as the contribution from the narrow and broad-line regions. We detect large-amplitude UV variability, which is unusual for a large black hole mass AGN, like IC4329A, over such a small period. In fact, the fractional variability amplitude is larger in the UV band than in the X-ray band. This demonstrates that the observed UV variability is intrinsic to the disk, and is not due to X-ray illumination. The joint X-ray spectral analyses of five SXT and LAXPC spectral data reveal a soft-X-ray excess component, a narrow iron-line (with no indication of a significant Compton hump), and a steepening power-law ($ΔΓ\sim 0.21$) with increasing X-ray flux. The soft excess component could arise due to thermal Comptonization of the inner disk photons in a warm corona with $kT_e\sim 0.26$ keV. The UV emission we detect acts as the primary seed photons for the hot corona, which produces the broadband X-ray continuum. The X-ray spectral variability is well described by the cooling of this corona from $kT_e\sim42$ keV to $\sim 32$ keV with increasing UV flux, while the optical depth remains constant at $τ\sim 2.3$.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
AstroSat/UVIT observations of IC4329A: Constraining the accretion disc inner radius
Authors:
G. C. Dewangan,
P. Tripathi,
I. E. Papadakis,
K. P. Singh
Abstract:
We present a study of far and near-ultraviolet emission from the accretion disk in a powerful Seyfert 1 galaxy IC4329A using observations performed with the Ultraviolet Imaging Telescope (UVIT) onboard AstroSat. These data provide the highest spatial resolution and deepest images of IC4329A in the far and near UV bands acquired to date. The excellent spatial resolution of the UVIT data has allowed…
▽ More
We present a study of far and near-ultraviolet emission from the accretion disk in a powerful Seyfert 1 galaxy IC4329A using observations performed with the Ultraviolet Imaging Telescope (UVIT) onboard AstroSat. These data provide the highest spatial resolution and deepest images of IC4329A in the far and near UV bands acquired to date. The excellent spatial resolution of the UVIT data has allowed us to accurately separate the extended emission from the host galaxy and the AGN emission in the far and near UV bands. We derive the intrinsic AGN flux after correcting for the Galactic and internal reddening, as well as for the contribution of emission lines from the broad and narrow-line regions. The intrinsic UV continuum emission shows a marked deficit compared to that expected from the "standard" models of the accretion disk around an estimated black hole mass of 1-2x10^8Msun when the disk extends to the innermost stable circular orbit. We find that the intrinsic UV continuum is fully consistent with the standard disk models, but only if the disk emits from distances larger than 80-150 gravitational radii.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Role of interface morphology on the martensitic transformation in pure Fe
Authors:
Pawan Kumar Tripathi,
Shivraj Karewar,
Yu-Chieh Lo,
Somnath Bhowmick
Abstract:
Using classical molecular dynamics simulations, we study austenite to ferrite phase transformation in iron, focusing on the role of interface morphology. We compare two different morphologies; a \textit{flat} interface in which the two phases are joined according to Nishiyama-Wasserman orientation relationship vs. a \textit{ledged} one, having steps similar to the vicinal surface. We identify the…
▽ More
Using classical molecular dynamics simulations, we study austenite to ferrite phase transformation in iron, focusing on the role of interface morphology. We compare two different morphologies; a \textit{flat} interface in which the two phases are joined according to Nishiyama-Wasserman orientation relationship vs. a \textit{ledged} one, having steps similar to the vicinal surface. We identify the atomic displacements along a misfit dislocation network at the interface leading to the phase transformation. In case of \textit{ledged} interface, stacking faults are nucleated at the steps, which hinder the interface motion, leading to a lower mobility of the inter-phase boundary, than that of flat interface. Interestingly, we also find the temperature dependence of the interface mobility to show opposite trends in case of \textit{flat} vs. \textit{ledged} boundary. We believe that our study is going to present a unified and comprehensive view of martensitic transformation in iron with different interface morphology, which is lacking at present, as \textit{flat} and \textit{ledged} interfaces are treated separately in the existing literature.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
Spectro-Timing Analysis of a highly variable narrow-line Seyfert 1 galaxy NGC 4748 with AstroSat and XMM-Newton
Authors:
Main Pal,
Neeraj Kumari,
Pankaj Kushwaha,
K. P. Singh,
Alok C. Gupta,
Sachindra Naik,
G. C. Dewangan,
P. Tripathi,
Rathin Adhikari,
O. Adegoke,
H. Nandan
Abstract:
We present a detailed timing and spectral study of an extremely variable narrow-line Seyfert~1 galaxy NGC 4748 using observations in the year 2017 and 2014 performed with AstroSat and XMM-Newton, respectively. Both observations show extremely variable soft and hard X-ray emission that are correlated with each other. In the 2014 data set, the source retains its general behaviour of "softer when bri…
▽ More
We present a detailed timing and spectral study of an extremely variable narrow-line Seyfert~1 galaxy NGC 4748 using observations in the year 2017 and 2014 performed with AstroSat and XMM-Newton, respectively. Both observations show extremely variable soft and hard X-ray emission that are correlated with each other. In the 2014 data set, the source retains its general behaviour of "softer when brighter" while the 2017 observation exhibits a "harder when brighter" nature. Such changing behaviour is rare in AGNs and is usually observed in the black hole binary systems. The "harder when brighter" is confirmed with the anti-correlation between the photon index and the 0.3-10 keV power-law flux. This suggests a possible change in the accretion mode from standard to the advection-dominated flow. Additionally, both the observations show soft X-ray excess below 2 keV over the power-law continuum. This excess was fitted with a single or multiple blackbody component(s). The origin of soft excess during the 2017 observation is likely due to the cool Comptonization as the photon index changes with time. On the other hand, the broad iron line and delayed UV emission during the 2014 observation strongly suggest that X-ray illumination onto the accretion disk and reflection and reprocessing play a significant role in this AGN.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
AstroSat Observation of 2016 Outburst of H 1743-322
Authors:
Swadesh Chand,
V. K. Agrawal,
G. C. Dewangan,
Prakash Tripathi,
Parijat Thakur
Abstract:
We present the detection of type C quasi-periodic oscillation (QPO) along with upper harmonic at respective frequencies of $\sim0.6$ Hz and $\sim1.2$ Hz in the single AstroSat observation taken during the 2016 outburst of the low-mass black hole X-ray binary H~1743--322. These frequencies are found to be shifted by $\sim0.4$ Hz for the QPO and $\sim0.8$ Hz for the upper harmonic with respect to th…
▽ More
We present the detection of type C quasi-periodic oscillation (QPO) along with upper harmonic at respective frequencies of $\sim0.6$ Hz and $\sim1.2$ Hz in the single AstroSat observation taken during the 2016 outburst of the low-mass black hole X-ray binary H~1743--322. These frequencies are found to be shifted by $\sim0.4$ Hz for the QPO and $\sim0.8$ Hz for the upper harmonic with respect to that found in the simultaneous \textit{XMM-Newton} and \textit{NuSTAR} observation taken five days later than the AstroSat observation, indicating a certain geometrical change in the system. However, the centroid frequency of the QPO and the upper harmonic do not change with energy, indicating the energy-independent nature. The decreasing trend in the fractional rms of the QPO with energy is consistent with the previous results for this source in the low/hard state. The value of the photon index ($Γ\sim1.67$) also indicates that the source was in the low/hard state during this particular observation. In addition, similar to the \textit{XMM-Newton} observations during the same outburst, we find a hard lag of $\sim21$ ms in the frequency range of $\sim1-5$ Hz. The log-linear trend between the averaged time lag and energy indicates the propagation of fluctuations in the mass accretion rate from outer part of the accretion disk to the inner hot regions.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Effect of wall roughness on heat transfer in the supercritical water flow
Authors:
Piyush Mani Tripathi,
Saptarshi Basu
Abstract:
This paper discusses the numerical investigation of the wall roughness effect on the supercritical water flow susceptible to heat transfer deterioration (HTD). The simulation was carried in the vertical circular pipe using the SST k-omega turbulence model for different sets of heat flux (220kW/m2 & 1810kW/m2) and mass flow rate (0.0106kg/s &0.022kg/s) at a maximum pressure of 25.3MPa. The presence…
▽ More
This paper discusses the numerical investigation of the wall roughness effect on the supercritical water flow susceptible to heat transfer deterioration (HTD). The simulation was carried in the vertical circular pipe using the SST k-omega turbulence model for different sets of heat flux (220kW/m2 & 1810kW/m2) and mass flow rate (0.0106kg/s &0.022kg/s) at a maximum pressure of 25.3MPa. The presence of roughness was incorporated as a uniform sand-grain roughness on the heated wall. As a result, HTD recuperated gradually as the roughness height (Ks) was increased. The mitigation of HTD is a direct consequence of the increase in turbulent kinetic energy (TKE). In contrast, the delay in the onset of HTD is due to the decrease in the dominant forces (buoyancy or acceleration effects) responsible for HTD occurrence. An equivalent thermal resistance model was proposed to elucidate the same. Additionally, the heat transfer coefficient reduces (HTDn) near the outlet at higher roughness values where HTD has completely recovered. This is attributed to the high specific heat value around the pseudocritical temperature. In the end, the efficacy of the roughness was analyzed using two methods: entropy generation and thermal performance factor. Both techniques suggest that the use of rough pipe is beneficial. However, the first method recommends using a Ks value greater than the critical roughness height (Ksc): as the total entropy generation was found to peak at Ksc because of the thermal conductivity variation with temperature. The study revealed high sensitivity of maximum wall temperature and HTD onset to roughness presence. In addition, contrary to usual HTD, a new type of heat transfer impairment (HTDn) can occur without any loss of TKE.
△ Less
Submitted 30 August, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Novel two-phase method for supercritical water flow
Authors:
Piyush Mani Tripathi,
Saptarshi Basu
Abstract:
The current resurgence in the phase diagram study beyond the critical point has questioned the conventional belief of supercritical fluid as a single phase with varying properties. On the same line, a novel two-phase approach has been proposed to study the supercritical flow with heat transfer deterioration (HTD) phenomena. The Volume of Fluid (VOF) multiphase model has been used to analyze the fl…
▽ More
The current resurgence in the phase diagram study beyond the critical point has questioned the conventional belief of supercritical fluid as a single phase with varying properties. On the same line, a novel two-phase approach has been proposed to study the supercritical flow with heat transfer deterioration (HTD) phenomena. The Volume of Fluid (VOF) multiphase model has been used to analyze the flow, and the simulation result reasonably predicts the wall temperature peaks. Moreover, the velocity and turbulent kinetic energy profiles for different axial locations explain the occurrence of HTD, and it is on par with the pre-existing numerical method. Besides, the quantitative analysis presented in the paper expounds on qualitative understanding. The parametric study of the thermophysical properties revealed that the density variation is the primary cause of HTD in supercritical flows. So banking on this conclusion, the propounded study focuses on the forces generated due to the density variation. This technique equips us with a holistic picture of the supercritical flows. It leads to the inference that for no HTD effects to be present, buoyancy and inertia forces have to be of comparable magnitude throughout the flow. In addition, the pseudo phase change model outclasses the existing research by rendering us the volume fraction data. Map** of this variable reveals a sudden jump in the lighter phase's thickness near the wall at the site of HTD, which is also reflected as a maximum in the nondimensional two-phase thickness (P) plot. Nevertheless, this observation is only restricted to HTD caused by buoyancy. In the end, a theoretical expression has been conceptualized for computing the two-phase thickness (h) value, which can serve as a fundamental length scale in supercritical flows as it marks the region of highest property gradient near the wall.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
Aqueous Alteration Studies on Mukundpura (MK) Carbonaceous Chondrite using FTIR, TGA and Raman spectroscopy and its CM classification
Authors:
A. Dixit,
R. P. Tripathi,
Sudhanshu Kumar,
Mohd. Azaj Ansari,
K Sreenivas
Abstract:
FTIR measurement on MK immediately after its fall, shows a unique doublet around 10 micrometer, significantly different from many ordinary CM2 chondrites, where only a singlet around 10 micrometer is observed. Also, a very faint 11.2 micrometer feature in MK indicates the absence of anhydrous silicates, olivine and thus complete serpentinization of anhydrous silicates due to severe aqueous alterat…
▽ More
FTIR measurement on MK immediately after its fall, shows a unique doublet around 10 micrometer, significantly different from many ordinary CM2 chondrites, where only a singlet around 10 micrometer is observed. Also, a very faint 11.2 micrometer feature in MK indicates the absence of anhydrous silicates, olivine and thus complete serpentinization of anhydrous silicates due to severe aqueous alteration on parent body. Raman studies show a low peak metamorphic temperature around 0 °C and consistent with the absence of peak corresponding to tochilinite in FTIR spectrum, which forms at higher temperature. The first thermogravimetric measurement was carried out within 24 hrs. of MK fall, showing 10% weight loss in 400-770 °C range and is consistent with TGA on another MK fragment of same batch after 30 months, confirming no environmental impact on the water bound to hydrated clay. This large weight loss also rules out any post aqueous alteration thermal event suffered by MK and signify the presence of hydrated clay. The measured ratio of MgO/FeO is about 0.56, and sulfur weight is 3.4 %. Recently, based on only aqueous alteration Potin et al. (Potin et al. 2020), classified MK as CM1, implying MK should be utmost altered CM, whereas Ray et al. (Ray et al 2018), as equivalent to Paris like (CM2.7), least aqueous altered. However, if we combine the observed aqueous alteration, MgO/FeO weight ratio, and sulfur weight % together will provide a more comprehensive understanding for MK, and thus, we classify it as CM2.3.insted CM1 or CM(2.7-2.9).
△ Less
Submitted 10 November, 2020;
originally announced November 2020.
-
Deep Learning Prediction of Adverse Drug Reactions Using Open TG-GATEs and FAERS Databases
Authors:
Attayeb Mohsen,
Lokesh P. Tripathi,
Kenji Mizuguchi
Abstract:
With the advancements in Artificial intelligence (AI) and the accumulation of healthrelated big data, it has become increasingly feasible and commonplace to leverage machine learning technologies to analyze clinical and omics metadata to assess the possibility of adverse drug reactions or events (ADRs) in the course of drug discovery. Here, we have described a novel approach that combined drug-ind…
▽ More
With the advancements in Artificial intelligence (AI) and the accumulation of healthrelated big data, it has become increasingly feasible and commonplace to leverage machine learning technologies to analyze clinical and omics metadata to assess the possibility of adverse drug reactions or events (ADRs) in the course of drug discovery. Here, we have described a novel approach that combined drug-induced gene expression profile from Open TG-GATEs (Toxicogenomics Project-Genomics Assisted Toxicity Evaluation Systems) and ADR occurrence information from FAERS (FDA [Food and Drug Administration] Adverse Events Reporting System) database to predict the likelihood of ADRs. We generated a total of 14 models using Deep Neural Networks (DNN) to predict different ADRs; in the validation tests, our models achieved a mean accuracy of 85.71%, indicating that our approach successfully and consistently predicted ADRs for a wide range of drugs. As an example, we have described the ADR model in the context of Duodenal ulcer. We believe that our models will help predict the likelihood of ADRs while testing novel pharmaceutical compounds, and will be useful for researchers in drug discovery.
△ Less
Submitted 11 October, 2020;
originally announced October 2020.
-
2016 outburst of H~1743--322: \textit{XMM-Newton} and \textit{NuSTAR} view
Authors:
Swadesh Chand,
V. K. Agrawal,
G. C. Dewangan,
Prakash Tripathi,
Parijat Thakur
Abstract:
We report the detection of type C QPO along with the upper harmonic in the commensurate ratio of 1:2 in the two observations of the low-mass black hole transient H~1743--322 jointly observed by \textit{XMM-Newton} and \textit{NuSTAR} during the 2016 outburst. We find that the QPO and the upper harmonic exhibit shifts in their centroid frequencies in the second observation with respect to the first…
▽ More
We report the detection of type C QPO along with the upper harmonic in the commensurate ratio of 1:2 in the two observations of the low-mass black hole transient H~1743--322 jointly observed by \textit{XMM-Newton} and \textit{NuSTAR} during the 2016 outburst. We find that the QPO and the upper harmonic exhibit shifts in their centroid frequencies in the second observation with respect to the first one. The hardness intensity diagram implies that in contrast to 2008 and 2014 failed outbursts, 2016 outburst was a successful one. We also detect the presence of a broad iron K$α$ line at $\sim$6.5 keV and reflection hump in the energy range of 15--30 keV in both the observations. Along with the shape of the power density spectra, the nature of the characteristic frequencies and the fractional rms amplitude of the timing features imply that the source stayed in the low/hard state during these observations. Moreover, photon index and other spectral parameters also indicate the low/hard state behavior of the source. Unlike the soft lag detected in this source during the 2008 and 2014 failed outbursts, we observe hard time-lag of $0.40\pm0.15$ and $0.32\pm0.07$ s in the 0.07--0.4 Hz frequency range in the two observations during the 2016 outburst. The correlation between the photon index and the centroid frequency of the QPO is consistent with the previous results. Furthermore, the high value of the Comptonized fraction and the weak thermal component indicate that the QPO is being modulated by the Comptonization process.
△ Less
Submitted 20 March, 2020;
originally announced March 2020.
-
EmbPred30: Assessing 30-days Readmission for Diabetic Patients using Categorical Embeddings
Authors:
Sarthak,
Shikhar Shukla,
Surya Prakash Tripathi
Abstract:
Hospital readmission is a crucial healthcare quality measure that helps in determining the level of quality of care that a hospital offers to a patient and has proven to be immensely expensive. It is estimated that more than $25 billion are spent yearly due to readmission of diabetic patients in the USA. This paper benchmarks existing models and proposes a new embedding based state-of-the-art deep…
▽ More
Hospital readmission is a crucial healthcare quality measure that helps in determining the level of quality of care that a hospital offers to a patient and has proven to be immensely expensive. It is estimated that more than $25 billion are spent yearly due to readmission of diabetic patients in the USA. This paper benchmarks existing models and proposes a new embedding based state-of-the-art deep neural network(DNN). The model can identify whether a hospitalized diabetic patient will be readmitted within 30 days or not with an accuracy of 95.2% and Area Under the Receiver Operating Characteristics(AUROC) of 97.4% on data collected from 130 US hospitals between 1999-2008. The results are encouraging with patients having changes in medication while admitted having a high chance of getting readmitted. Identifying prospective patients for readmission could help the hospital systems in improving their inpatient care, thereby saving them from unnecessary expenditures.
△ Less
Submitted 25 February, 2020;
originally announced February 2020.
-
Effect of dissolved salt on the anomalies of water at negative pressure
Authors:
Alberto Zaragoza,
Chandra Shekhar Pati Tripathi,
Miguel A. Gonzalez,
José Luis F. Abascal,
Frédéric Caupin,
Chantal Valeriani
Abstract:
Adding salt to water at ambient pressure affects its thermodynamic properties. At low salt concentration, anomalies such as the density maximum are shifted to lower temperature, while at large enough salt concentration they cannot be observed any more. Here we investigate the effect of salt on an anomaly recently observed in pure water at negative pressure: the existence of a sound velocity minimu…
▽ More
Adding salt to water at ambient pressure affects its thermodynamic properties. At low salt concentration, anomalies such as the density maximum are shifted to lower temperature, while at large enough salt concentration they cannot be observed any more. Here we investigate the effect of salt on an anomaly recently observed in pure water at negative pressure: the existence of a sound velocity minimum along isochores. We compare experiments and simulations for an aqueous solution of sodium chloride with molality around $1.2\,\mathrm{mol\,kg^{-1}}$, reaching pressures beyond $-100\,\mathrm{MPa}$. We also discuss the origin of the minima in the sound velocity and emphasize the importance of the relative position of the temperatures of sound velocity and density anomalies.
△ Less
Submitted 20 April, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Role of disconnections in mobility of the austenite-ferrite inter-phase boundary in Fe
Authors:
Pawan Kumar Tripathi,
Sumit Kumar Maurya,
Somnath Bhowmick
Abstract:
Austenite (γ-Fe, face centered cubic (FCC)) to ferrite (α-Fe, body centered cubic (BCC)) phase transformation in steel is of great significance from the point of view of industrial applications. In this work, using classical molecular dynamics simulations, we study the atomistic mechanisms involved during the nucleation and growth of the ferrite phase embedded in an austenite phase. We find that t…
▽ More
Austenite (γ-Fe, face centered cubic (FCC)) to ferrite (α-Fe, body centered cubic (BCC)) phase transformation in steel is of great significance from the point of view of industrial applications. In this work, using classical molecular dynamics simulations, we study the atomistic mechanisms involved during the nucleation and growth of the ferrite phase embedded in an austenite phase. We find that the disconnections present at the inter-phase boundary can act as the nucleation centers for the ferrite phase. Relatively small interface velocities (1.19 - 4.67 m/s) confirm a phase change via massive transformation mechanism. Boundary mobilities obtained in a temperature range of 1000 to 1400 K show an Arrhenius behavior, with activation energies ranging from 30 - 40 kJ/mol.
△ Less
Submitted 2 January, 2019; v1 submitted 10 August, 2018;
originally announced August 2018.
-
Directional Second Harmonic Generation Controlled by Sub-wavelength Facets of an Organic Mesowire
Authors:
Deepak K. Sharma,
Shailendra K. Chaubey,
Adarsh B. Vasista,
Jesil Jose,
Ravi P N Tripathi,
Alexandre Bouhelier,
G V Pavan Kumar
Abstract:
Directional harmonic generation is an important property characterizing the ability of nonlinear optical antennas to diffuse the signal in well-defined region of space. Herein, we show how sub-wavelength facets of an organic molecular mesowire crystal can be utilized to systematically vary the directionality of second harmonic generation (SHG) in the forward scattering geometry. We demonstrate thi…
▽ More
Directional harmonic generation is an important property characterizing the ability of nonlinear optical antennas to diffuse the signal in well-defined region of space. Herein, we show how sub-wavelength facets of an organic molecular mesowire crystal can be utilized to systematically vary the directionality of second harmonic generation (SHG) in the forward scattering geometry. We demonstrate this capability on crystalline diamonoanthraquinone (DAAQ) mesowires with subwavelength facets. We observed that the radial angles of the SHG emission can be tuned over a range of 130 degrees. This angular variation arises due to spatially distributed nonlinear dipoles in the focal volume of the excitation as well as the geometrical cross-section and facet orientation of the mesowire. Numerical simulations of the near-field excitation profile corroborate the role of the mesowire geometry in localizing the electric field. In addition to directional SHG from the mesowire, we experimentally observe optical waveguiding of the nonlinear two-photon excited fluorescence (TPEF). Interestingly, we observed that for a given pump excitation, the TPEF signal is isotropic and delocalized, whereas the SHG emission is directional and localized at the location of excitation. All the observed effects have direct implications not only in active nonlinear optical antennas, but also in nonlinear signal processing.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Simultaneous Orientational and Conformational Molecular Dynamics in Solid (1,1,2)-Trichloroethane
Authors:
Michela Romanini,
Efstratia Mitsari,
Pragya Tripathi,
Pablo Serra,
Mariano Zuriaga,
Josep Lluis Tamarit,
Roberto Macovez
Abstract:
The molecular dynamics in the ambient-pressure solid phase of (1,1,2)-trichloroethane is studied by means of broadband dielectric spectroscopy and molecular dynamics simulations. The dielectric spectra of polycrystalline samples obtained by crystallization from the liquid phase exhibit, besides a space-charge relaxation associated with accumulation of charges at crystalline domain boundaries, two…
▽ More
The molecular dynamics in the ambient-pressure solid phase of (1,1,2)-trichloroethane is studied by means of broadband dielectric spectroscopy and molecular dynamics simulations. The dielectric spectra of polycrystalline samples obtained by crystallization from the liquid phase exhibit, besides a space-charge relaxation associated with accumulation of charges at crystalline domain boundaries, two loss features arising from dipolar molecular relaxations. The most prominent and slower of the two loss features is identified as a configurational leap of the molecules which involves a simultaneous change in spatial orientation and structural conformation, namely between two isomeric forms (gauche$^+$ and gauche$^-$) of opposite chirality. In this peculiar dynamic process, the positions of the three chlorine atoms in the crystal lattice remain unchanged, while those of the carbon and hydrogen atoms are modified. This dynamic process is responsible for the disorder observed in an earlier x-ray diffraction study and confirmed by our simulation, which is present only at temperatures relatively close to the melting point, starting 40 K below. The onset of the disorder is visible as an anomaly in the temperature dependence of the dc conductivity of the sample at exactly the same temperature. While the slower relaxation dynamics (combined isomerization/reorientation) becomes increasingly more intense on approaching the melting point, the faster dynamics exhibits significantly lower but constant dielectric strength. Based on our molecular dynamics simulations, we assign the faster relaxation to large fluctuations of the molecular dipole moments, partly due to large-angle librations of the chloroethane species.
△ Less
Submitted 27 February, 2018;
originally announced February 2018.
-
Large-scale dynamic assembly of metal nanostructures in plasmofluidic field
Authors:
Partha Pratim Patra,
Rohit Chikkaraddy,
Sreeja Thampi,
Ravi P. N. Tripathi,
G. V. Pavan Kumar
Abstract:
We discuss two aspects of the plasmofluidic assembly of plasmonic nanostructures at the metal fluid interface. First, we experimentally show how three and four spot evanescent wave excitation can lead to unconventional assembly of plasmonic nanoparticles at the metal fluid interface. We observed that the pattern of assembly was mainly governed by the plasmon interference pattern at the metal fluid…
▽ More
We discuss two aspects of the plasmofluidic assembly of plasmonic nanostructures at the metal fluid interface. First, we experimentally show how three and four spot evanescent wave excitation can lead to unconventional assembly of plasmonic nanoparticles at the metal fluid interface. We observed that the pattern of assembly was mainly governed by the plasmon interference pattern at the metal fluid interface, and further led to interesting dynamic effects within the assembly. The interference patterns were corroborated by 3D finite difference time domain simulations. Secondly, we show how anisotropic geometry, such as Ag nanowires, can be assembled and aligned in unstructured and structured plasmofluidic fields. We found that by structuring the metal-film, Ag nanowires can be aligned at the metal fluid interface with a single evanescent wave excitation, thus highlighting the prospect of assembling plasmonic circuits in a fluid. An interesting aspect of our method is that we obtain the assembly at locations away from the excitation points, thus leading to remote assembly of nanostructures. The results discussed herein may have implications in realizing a platform for reconfigurable plasmonic metamaterials, and a test-bed to understand the effect of plasmon interference on assembly of nanostructures in fluids.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
arXiv:1802.05157
[pdf]
physics.optics
cond-mat.mes-hall
cond-mat.soft
physics.app-ph
physics.chem-ph
Plasmofluidic Single-Molecule Surface Enhanced Raman Scattering from Dynamic Assembly of Plasmonic Nanoparticles
Authors:
Partha Pratim Patra,
Rohit Chikkaraddy,
Ravi P. N. Tripathi,
Arindam Dasgupta,
G. V. Pavan Kumar
Abstract:
Single-molecule surface enhanced Raman scattering (SM-SERS) is one of the vital applications of plasmonic nanoparticles. The SM-SERS sensitivity critically depends on plasmonic hot-spots created at the vicinity of such nanoparticles. In conventional fluid-phase SM-SERS experiments, plasmonic hot-spots are facilitated by chemical aggregation of nanoparticles. Such aggregation is usually irreversibl…
▽ More
Single-molecule surface enhanced Raman scattering (SM-SERS) is one of the vital applications of plasmonic nanoparticles. The SM-SERS sensitivity critically depends on plasmonic hot-spots created at the vicinity of such nanoparticles. In conventional fluid-phase SM-SERS experiments, plasmonic hot-spots are facilitated by chemical aggregation of nanoparticles. Such aggregation is usually irreversible, and hence, nanoparticles cannot be re-dispersed in the fluid for further use. Here, we show how to combine SM-SERS with plasmon-polariton assisted, reversible assembly of plasmonic nanoparticles at an unstructured metal-fluid interface. One of the unique features of our method is that we use a single evanescent-wave optical excitation for nanoparticle-assembly, manipulation and SM-SERS measurements. Furthermore, by utilizing dual excitation of plasmons at metal-fluid interface, we create interacting assemblies of metal nanoparticles, which may be further harnessed in dynamic lithography of dispersed nanostructures. Our work will have implications in realizing optically addressable, plasmofluidic, single-molecule detection platforms.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
SegDenseNet: Iris Segmentation for Pre and Post Cataract Surgery
Authors:
Aditya Lakra,
Pavani Tripathi,
Rohit Keshari,
Mayank Vatsa,
Richa Singh
Abstract:
Cataract is caused due to various factors such as age, trauma, genetics, smoking and substance consumption, and radiation. It is one of the major common ophthalmic diseases worldwide which can potentially affect iris-based biometric systems. India, which hosts the largest biometrics project in the world, has about 8 million people undergoing cataract surgery annually. While existing research shows…
▽ More
Cataract is caused due to various factors such as age, trauma, genetics, smoking and substance consumption, and radiation. It is one of the major common ophthalmic diseases worldwide which can potentially affect iris-based biometric systems. India, which hosts the largest biometrics project in the world, has about 8 million people undergoing cataract surgery annually. While existing research shows that cataract does not have a major impact on iris recognition, our observations suggest that the iris segmentation approaches are not well equipped to handle cataract or post cataract surgery cases. Therefore, failure in iris segmentation affects the overall recognition performance. This paper presents an efficient iris segmentation algorithm with variations due to cataract and post cataract surgery. The proposed algorithm, termed as SegDenseNet, is a deep learning algorithm based on DenseNets. The experiments on the IIITD Cataract database show that improving the segmentation enhances the identification by up to 25% across different sensors and matchers.
△ Less
Submitted 19 April, 2018; v1 submitted 30 January, 2018;
originally announced January 2018.
-
Doughnut shaped emission from vertical organic nanowire coupled to thin plasmonic film
Authors:
Adarsh B. Vasista,
Ravi P. N. Tripathi,
Shailendra K. Chaubey,
Sunny Tiwari,
G. V. Pavan Kumar
Abstract:
Vertical nanowires facilitate an innovative mechanism to channel the optical field in the orthogonal direction and act as a nanoscale light source. Subwavelength, vertically oriented nanowire platforms, both of plasmonic and semiconducting variety can facilitate interesting far field emission profiles and potentially carry orbital angular momentum states. Motivated by these prospects, in this lett…
▽ More
Vertical nanowires facilitate an innovative mechanism to channel the optical field in the orthogonal direction and act as a nanoscale light source. Subwavelength, vertically oriented nanowire platforms, both of plasmonic and semiconducting variety can facilitate interesting far field emission profiles and potentially carry orbital angular momentum states. Motivated by these prospects, in this letter, we show how a hybrid plasmonic - organic platform can be harnessed to engineer far field radiation. The system that we have employed is an organic nanowire made of diaminoanthroquinone grown on a plasmonic gold film. We experimentally and numerically studied angular distribution of surface plasmon polariton mediated emission from a single, vertical organic nanowire by utilising evanescent excitation and Fourier plane microscopy. Photoluminescence and elastic scattering from single nanowire was analysed individually in terms of in plane momentum states of the outcoupled photons. We found that the emission is doughnut shaped in both photoluminescence and elastic scattering regimes. We anticipate that the discussed results can be relevant in designing efficient, polariton-mediated nanoscale photon sources which can carry orbital angular momentum states.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Observations of a Field-Aligned Ion/Ion-Beam Instability in a Magnetized Laboratory Plasma
Authors:
P. V. Heuer,
M. S. Weidl,
R. S. Dorst,
D. B. Schaeffer,
A. S. Bondarenko,
S. K. P. Tripathi,
B. Van Compernolle,
S. Vincena,
C. G. Constantin,
C. Niemann,
D. Winske
Abstract:
Collisionless coupling between super Alfvénic ions and an ambient plasma parallel to a background magnetic field is mediated by a set of electromagnetic ion/ion-beam instabilities including the resonant right hand instability (RHI). To study this coupling and its role in parallel shock formation, a new experimental configuration at the University of California, Los Angeles utilizes high-energy and…
▽ More
Collisionless coupling between super Alfvénic ions and an ambient plasma parallel to a background magnetic field is mediated by a set of electromagnetic ion/ion-beam instabilities including the resonant right hand instability (RHI). To study this coupling and its role in parallel shock formation, a new experimental configuration at the University of California, Los Angeles utilizes high-energy and high-repetition-rate lasers to create a super-Alfvénic field-aligned debris plasma within an ambient plasma in the Large Plasma Device (LAPD). We used a time-resolved fluorescence monochromator and an array of Langmuir probes to characterize the laser plasma velocity distribution and density. The debris ions were observed to be sufficiently super-Alfvénic and dense to excite the RHI. Measurements with magnetic flux probes exhibited a right-hand circularly polarized frequency chirp consistent with the excitation of the RHI near the laser target. We compared measurements to 2D hybrid simulations of the experiment.
△ Less
Submitted 29 November, 2017; v1 submitted 28 November, 2017;
originally announced November 2017.
-
Synthesis of High-Quality Graphene through Electrochemical Exfoliation of Graphite in Alkaline Electrolyte
Authors:
Prashant Tripathi,
Ch. Ravi Prakash Patel,
M. A. Shaz,
O. N. Srivastava
Abstract:
Owing to wide variety of applications of graphene, high-quality and economical way of synthesizing graphene is highly desirable. In this study, we report a cost effective and simple approach to production of high-quality graphene. Here the synthesis route is based on electrochemical exfoliation of graphite. Instead of using strong acids (which oxidise and damage the geometrical topology of graphen…
▽ More
Owing to wide variety of applications of graphene, high-quality and economical way of synthesizing graphene is highly desirable. In this study, we report a cost effective and simple approach to production of high-quality graphene. Here the synthesis route is based on electrochemical exfoliation of graphite. Instead of using strong acids (which oxidise and damage the geometrical topology of graphene), we have used alkaline solution (KOH dissolved in water) as electrolyte. TEM analysis shows that as prepared graphene has 1-4 layers and large lateral size (up to ~18 micrometer). Raman analysis shows a unique feature. The D peak which is invariably present in graphene is absent here. This suggests that disorder in the graphene sheets synthesized by the present method, is nearly absent. A tentative mechanism of electrochemical exfoliation in alkaline electrolyte is discussed and described.
△ Less
Submitted 28 October, 2013;
originally announced October 2013.
-
Matching with our Eyes Closed
Authors:
Gagan Goel,
Pushkar Tripathi
Abstract:
Motivated by an application in kidney exchange, we study the following query-commit problem: we are given the set of vertices of a non-bipartite graph G. The set of edges in this graph are not known ahead of time. We can query any pair of vertices to determine if they are adjacent. If the queried edge exists, we are committed to match the two endpoints. Our objective is to maximize the size of the…
▽ More
Motivated by an application in kidney exchange, we study the following query-commit problem: we are given the set of vertices of a non-bipartite graph G. The set of edges in this graph are not known ahead of time. We can query any pair of vertices to determine if they are adjacent. If the queried edge exists, we are committed to match the two endpoints. Our objective is to maximize the size of the matching.
This restriction in the amount of information available to the algorithm constraints us to implement myopic, greedy-like algorithms. A simple deterministic greedy algorithm achieves a factor 1/2 which is tight for deterministic algorithms. An important open question in this direction is to give a randomized greedy algorithm that has a significantly better approximation factor. This question was first asked almost 20 years ago by Dyer and Frieze [9] where they showed that a natural randomized strategy of picking edges uniformly at random doesn't help and has an approximation factor of 1/2 + o(1). They left it as an open question to devise a better randomized greedy algorithm. In subsequent work, Aronson, Dyer, Frieze, and Suen [2] gave a different randomized greedy algorithm and showed that it attains a factor 0.5 + epsilon where epsilon is 0.0000025.
In this paper we propose and analyze a new randomized greedy algorithm for finding a large matching in a general graph and use it to solve the query commit problem mentioned above. We show that our algorithm attains a factor of at least 0.56, a significant improvement over 0.50000025. We also show that no randomized algorithm can have an approximation factor better than 0.7916 for the query commit problem. For another large and interesting class of randomized algorithms that we call vertex-iterative algorithms, we show that no vertex-iterative algorithm can have an approximation factor better than 0.75.
△ Less
Submitted 22 August, 2013; v1 submitted 12 June, 2013;
originally announced June 2013.