-
Automated control and optimisation of laser driven ion acceleration
Authors:
B. Loughran,
M. J. V. Streeter,
H. Ahmed,
S. Astbury,
M. Balcazar,
M. Borghesi,
N. Bourgeois,
C. B. Curry,
S. J. D. Dann,
S. DiIorio,
N. P. Dover,
T. Dzelzanis,
O. C. Ettlinger,
M. Gauthier,
L. Giuffrida,
G. D. Glenn,
S. H. Glenzer,
J. S. Green,
R. J. Gray,
G. S. Hicks,
C. Hyland,
V. Istokskaia,
M. King,
D. Margarone,
O. McCusker
, et al. (10 additional authors not shown)
Abstract:
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by ma…
▽ More
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimisation. Here, an automated, HRR-compatible system produced high fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimisation of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually-optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimisation of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Probing ultrafast laser plasma processes inside solids with resonant small-angle X-ray scattering
Authors:
Lennart Gaus,
Lothar Bischoff,
Michael Bussmann,
Eric Cunningham,
Chandra B. Curry,
Eric Galtier,
Maxence Gauthier,
Alejandro Laso García,
Marco Garten,
Siegfried Glenzer,
Jörg Grenzer,
Christian Gutt,
Nicholas J. Hartley,
Lingen Huang,
Uwe Hübner,
Dominik Kraus,
Hae Ja Lee,
Emma E. McBride,
Josefine Metzkes-Ng,
Bob Nagler,
Motoaki Nakatsutsumi,
Jan Nikl,
Masato Ota,
Alexander Pelka,
Irene Prencipe
, et al. (11 additional authors not shown)
Abstract:
Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray…
▽ More
Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray scattering (SAXS) patterns and their asymmetries occurring at X-ray energies of atomic bound-bound transitions contain information on the volumetric nanoscopic distribution of density, ionization and temperature. Buried heavy ion structures in high intensity laser irradiated solids expand on the nanometer scale following heat diffusion, and are heated to more than 2 million Kelvin. These experiments demonstrate resonant SAXS with the aim to better characterize dynamic processes in extreme laboratory plasmas.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Laser-driven neutron source from high temperature D-D fusion reactions
Authors:
Xue**g Jiao,
C. Curry,
M. Gauthier,
F. Fiuza,
J. Kim,
E. McCary,
L. Labun,
O. Z. Labun,
C. Schoenwaelder,
R. Roycroft,
G. Tiwari,
G. Glenn,
F. Treffert,
T. Ditmire,
S. Glenzer,
B. M. Hegelich
Abstract:
We report a laser-driven neutron source with high yield ($>10^8$/J) and high peak flux ($>10^{25}$/cm$^2$/s) derived from high-temperature deuteron-deuteron fusion reactions. The neutron yield and the fusion temperature ($\sim 200$ keV) in our experiment are respectively two orders of magnitude and one order of magnitude higher than any previous laser-induced D-D fusion reaction. The high-temperat…
▽ More
We report a laser-driven neutron source with high yield ($>10^8$/J) and high peak flux ($>10^{25}$/cm$^2$/s) derived from high-temperature deuteron-deuteron fusion reactions. The neutron yield and the fusion temperature ($\sim 200$ keV) in our experiment are respectively two orders of magnitude and one order of magnitude higher than any previous laser-induced D-D fusion reaction. The high-temperature plasma is generated from thin ($\sim 2\,μ$m), solid-density deuterium targets, produced by a cryogenic jet, irradiated by a 140 fs, 130 J petawatt laser with an F/3 off-axis parabola and a plasma mirror achieving fast volumetric heating of the target. The fusion temperature and neutron fluxes achieved here suggest future laser experiments can take advantage of neutrons to diagnose the plasma conditions and come closer to laboratory study of astrophysically-relevant nuclear physics.
△ Less
Submitted 11 November, 2020;
originally announced November 2020.
-
Design and Implementation of a Thomson Parabola for Fluence Dependent Energy-Loss Measurements at the Neutralized Drift Compression eXperiment
Authors:
F. Treffert,
Q. Ji,
P. A. Seidl,
A. Persaud,
B. Ludewigt,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. Stepanov,
M. Roth,
T. Schenkel
Abstract:
The interaction of ion beams with matter includes the investigation of the basic principles of ion stop** in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stop** in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compressi…
▽ More
The interaction of ion beams with matter includes the investigation of the basic principles of ion stop** in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stop** in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compression eXperiment (NDCX-II) for ion energy-loss measurements at different ion beam fluences. The linear induction accelerator NDCX-II delivers 2 ns short, intense ion pulses, up to several tens of nC/pulse, or 10$^{10}$-10$^{11}$ ions, with a peak kinetic energy of ~1.1 MeV and a minimal spot size of 2 mm FWHM. For this particular accelerator the energy determination with conventional beam diagnostics, for example, time of flight measurements, is imprecise due to the non-trivial longitudinal phase space of the beam. In contrast, a Thomson parabola is well suited to reliably determine the beam energy distribution. The Thomson parabola differentiates charged particles by energy and charge-to-mass ratio, through deflection of charged particles by electric and magnetic fields. During first proof-of-principle experiments, we achieved to reproduce the average initial helium beam energy as predicted by computer simulations with a deviation of only 1.4 %. Successful energy-loss measurements with 1 μm thick Silicon Nitride foils show the suitability of the accelerator for such experiments. The initial ion energy was determined during a primary measurement without a target, while a second measurement, incorporating the target, was used to determine the transmitted energy. The energy-loss was then determined as the difference between the two energies.
△ Less
Submitted 28 September, 2018; v1 submitted 9 April, 2018;
originally announced April 2018.
-
Irradiation of Materials with Short, Intense Ion pulses at NDCX-II
Authors:
P. A. Seidl,
Q. Ji,
A. Persaud,
E. Feinberg,
B. Ludewigt,
M. Silverman,
A. Sulyman,
W. L. Waldron,
T. Schenkel,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. D. Stepanov,
F. Treffert,
M. Zimmer
Abstract:
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and report on recent target experiments on beam driven melting and transmission ion energy loss measurements with nanosecond and millimeter-scale ion beam pulses and thin tin foils. Bunches with around 10^11 ions, 1-mm radius, and 2-30 ns FWHM duration have been creat…
▽ More
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and report on recent target experiments on beam driven melting and transmission ion energy loss measurements with nanosecond and millimeter-scale ion beam pulses and thin tin foils. Bunches with around 10^11 ions, 1-mm radius, and 2-30 ns FWHM duration have been created with corresponding fluences in the range of 0.1 to 0.7 J/cm^2. To achieve these short pulse durations and mm-scale focal spot radii, the 1.1 MeV He+ ion beam is neutralized in a drift compression section, which removes the space charge defocusing effect during final compression and focusing. The beam space charge and drift compression techniques resemble necessary beam conditions and manipulations in heavy ion inertial fusion accelerators. Quantitative comparison of detailed particle-in-cell simulations with the experiment play an important role in optimizing accelerator performance.
△ Less
Submitted 12 April, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Recent Experiments At Ndcx-II: Irradiation Of Materials Using Short, Intense Ion Beams
Authors:
P. A. Seidl,
Q. Ji,
A. Persaud,
E. Feinberg,
B. Ludewigt,
M. Silverman,
A. Sulyman,
W. L. Waldron,
T. Schenkel,
J. J. Barnard,
A. Friedman,
D. P. Grote,
E. P. Gilson,
I. D. Kaganovich,
A. Stepanov,
F. Treffert,
M. Zimmer
Abstract:
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and summarize recent studies of material properties created with nanosecond and millimeter-scale ion beam pulses. The scientific topics being explored include the dynamics of ion induced damage in materials, materials synthesis far from equilibrium, warm dense matter…
▽ More
We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and summarize recent studies of material properties created with nanosecond and millimeter-scale ion beam pulses. The scientific topics being explored include the dynamics of ion induced damage in materials, materials synthesis far from equilibrium, warm dense matter and intense beam-plasma physics. We summarize the improved accelerator performance, diagnostics and results of beam-induced irradiation of thin samples of, e.g., tin and silicon. Bunches with over 3x10^10 ions, 1- mm radius, and 2-30 ns FWHM duration have been created. To achieve these short pulse durations and mm-scale focal spot radii, the 1.2 MeV He+ ion beam is neutralized in a drift compression section which removes the space charge defocusing effect during final compression and focusing. Quantitative comparison of detailed particle-in-cell simulations with the experiment play an important role in optimizing accelerator performance; these keep pace with the accelerator repetition rate of ~1/minute.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
