-
Strategies and safety simulations for ultrasonic cervical spinal cord neuromodulation
Authors:
Rui Xu,
Sven Bestmann,
Bradley E. Treeby,
Eleanor Martin
Abstract:
Focused ultrasound spinal cord neuromodulation studies have demonstrated spinal cord neuromodulation in small animals. The safe and efficacious translation of these approaches to human scale requires an understanding of ultrasound propagation and heat deposition within the human spine. To address this, combined acoustic and thermal modelling was used to assess the pressure and heat distributions p…
▽ More
Focused ultrasound spinal cord neuromodulation studies have demonstrated spinal cord neuromodulation in small animals. The safe and efficacious translation of these approaches to human scale requires an understanding of ultrasound propagation and heat deposition within the human spine. To address this, combined acoustic and thermal modelling was used to assess the pressure and heat distributions produced by a 500 kHz source focused to the C5/C6 level of the cervical spine via two approaches a) the posterior acoustic window between vertebral posterior arches, or b) the lateral intervertebral foramen from which the C6 spinal nerve exits. Pulse trains of 150 0.1 s pulses with a pulse repetition frequency of 0.33 Hz and free-field spatial peak pulse-averaged intensity of 10 W/cm^2 were simulated for the CT volumes of four subjects and for $\pm$10 mm translational and $\pm$10° rotational source positioning errors. Target pressures ranged between 20% and 70% of free-field spatial peak pressures with the posterior approach, and 20% and 100% with the lateral approach. When the source was optimally positioned with the posterior approach, peak spine heating values were below 1°C, but source mis-positioning resulted in bone heating up to 4°C. Heating with the lateral approach did not exceed 2°C within the mispositioning range. There were substantial inter-subject differences in target pressures and peak heating values. Target pressure varied three to four-fold between subjects, depending on approach, while peak heating varied approximately two-fold between subjects. This results in a near ten-fold range in the target pressure achieved per degree of peak heating between subjects. This highlights the importance of develo** trans-spine ultrasound simulation software for the assurance of subject-specific safety and efficacy of focused ultrasound spinal cord therapies.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
ITRUSST Consensus on Standardised Reporting for Transcranial Ultrasound Stimulation
Authors:
Eleanor Martin,
Jean-François Aubry,
Mark Schafer,
Lennart Verhagen,
Bradley Treeby,
Kim Butts Pauly
Abstract:
As transcranial ultrasound stimulation (TUS) advances as a precise, non-invasive neuromodulatory method, there is a need for consistent reporting standards to enable comparison and reproducibility across studies. To this end, the International Transcranial Ultrasonic Stimulation Safety and Standards Consortium (ITRUSST) formed a subcommittee of experts across several domains to review and suggest…
▽ More
As transcranial ultrasound stimulation (TUS) advances as a precise, non-invasive neuromodulatory method, there is a need for consistent reporting standards to enable comparison and reproducibility across studies. To this end, the International Transcranial Ultrasonic Stimulation Safety and Standards Consortium (ITRUSST) formed a subcommittee of experts across several domains to review and suggest standardised reporting parameters for low intensity TUS, resulting in the guide presented here. The scope of the guide is limited to reporting the ultrasound aspects of a study. The guide and supplementary material provide a simple checklist covering the reporting of: (1) the transducer and drive system, (2) the drive system settings, (3) the free field acoustic parameters, (4) the pulse timing parameters, (5) \emph{in situ} estimates of exposure parameters in the brain, and (6) intensity parameters. Detailed explanations for each of the parameters, including discussions on assumptions, measurements, and calculations, are also provided.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
ITRUSST Consensus on Biophysical Safety for Transcranial Ultrasonic Stimulation
Authors:
Jean-Francois Aubry,
David Attali,
Mark Schafer,
Elsa Fouragnan,
Charles Caskey,
Robert Chen,
Ghazaleh Darmani,
Ellen J. Bubrick,
Jérôme Sallet,
Christopher Butler,
Charlotte Stagg,
Miriam Klein-Flügge,
Seung-Schik Yoo,
Brad Treeby,
Lennart Verhagen,
Kim Butts Pauly
Abstract:
Transcranial ultrasonic stimulation (TUS) is an emerging technology for non-invasive brain stimulation. Currently, there are no established guidelines for the safe application of ultrasonic neuromodulation in humans beyond those used for diagnostic ultrasound. Therefore, in a series of meetings, the International Consortium for Transcranial Ultrasonic Stimulation Safety and Standards (ITRUSST) has…
▽ More
Transcranial ultrasonic stimulation (TUS) is an emerging technology for non-invasive brain stimulation. Currently, there are no established guidelines for the safe application of ultrasonic neuromodulation in humans beyond those used for diagnostic ultrasound. Therefore, in a series of meetings, the International Consortium for Transcranial Ultrasonic Stimulation Safety and Standards (ITRUSST) has established expert consensus on considerations for the biophysical safety of TUS.
As with diagnostic ultrasound, there are two main biophysical risks associated with the application of TUS: mechanical and thermal bioeffects. Mechanical bioeffects mainly concern the risk of acoustic cavitation, which can lead to local tissue damage such as cell death or blood vessel hemorrhage. Thermal bioeffects may occur when mechanical energy is converted into thermal energy through absorption, leading to tissue heating and potential thermal damage.
The ITRUSST safety group has established recommendations based on existing guidelines for diagnostic ultrasound from regulatory bodies such as the Food and Drug Administration (FDA), the British Medical Ultrasound Society (BMUS) and the American Institute of Ultrasound in Medicine (AIUM). Here, we review existing regulatory guidelines for biomedical ultrasound and consider their relevance for TUS. We then present a concise but comprehensive set of parameters and levels that we consider to be biophysically safe, as summarized in Table 1. While the limit of safety may be higher than these stated levels, the purpose of this paper is to state that this group considers these levels to be safe for transcranial ultrasound stimulation.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Physics-Based Acoustic Holograms
Authors:
Antonio Stanziola,
Ben T. Cox,
Bradley E. Treeby,
Michael D. Brown
Abstract:
Advances in additive manufacturing have enabled the realisation of inexpensive, scalable, diffractive acoustic lenses that can be used to generate complex acoustic fields via phase and/or amplitude modulation. However, the design of these holograms relies on a thin-element approximation adapted from optics which can severely limit the fidelity of the realised acoustic field. Here, we introduce phy…
▽ More
Advances in additive manufacturing have enabled the realisation of inexpensive, scalable, diffractive acoustic lenses that can be used to generate complex acoustic fields via phase and/or amplitude modulation. However, the design of these holograms relies on a thin-element approximation adapted from optics which can severely limit the fidelity of the realised acoustic field. Here, we introduce physics-based acoustic holograms with a complex internal structure. The structures are designed using a differentiable acoustic model with manufacturing constraints via optimisation of the acoustic property distribution within the hologram. The holograms can be fabricated simply and inexpensively using contemporary 3D printers. Experimental measurements demonstrate a significant improvement compared to conventional thin-element holograms.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
open-UST: An Open-Source Ultrasound Tomography Transducer Array System
Authors:
Morgan Roberts,
Eleanor Martin,
Michael D. Brown,
Ben T. Cox,
Bradley E. Treeby
Abstract:
Fast imaging methods are needed to promote widespread clinical adoption of Ultrasound Tomography (UST), and more widely available UST hardware could support the experimental validation of new measurement configurations. In this work, an open-source 256-element transducer ring array was developed (morganjroberts.github.io/open-UST) and manufactured using rapid prototy**, for only £2k. Novel manuf…
▽ More
Fast imaging methods are needed to promote widespread clinical adoption of Ultrasound Tomography (UST), and more widely available UST hardware could support the experimental validation of new measurement configurations. In this work, an open-source 256-element transducer ring array was developed (morganjroberts.github.io/open-UST) and manufactured using rapid prototy**, for only £2k. Novel manufacturing techniques were used, resulting in a 1.17$^{\circ}$ mean beam axis skew angle, a 104 $μ$m mean element position error, and a $\pm$13.6 $μ$m deviation in matching layer thickness. The nominal acoustic performance was measured using hydrophone scans and watershot data, and the 61.2 dB SNR, 55.4$^{\circ}$ opening angle, 16.3 mm beamwidth and 54% transmit-receive bandwidth (-12 dB), were found to be similar to existing systems, and compatible with full waveform inversion reconstruction methods. The inter-element variation in acoustic performance was typically <10% without using normalisation, meaning that the elements can be modelled identically during image reconstruction, removing the need for individual source definitions based on hydrophone measurements. Finally, data from a phantom experiment was successfully reconstructed. These results demonstrate that the open-UST system is accessible for users, and suitable for UST imaging research.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
A Learned Born Series for Highly-Scattering Media
Authors:
Antonio Stanziola,
Simon Arridge,
Ben T. Cox,
Bradley E. Treeby
Abstract:
A new method for solving the wave equation is presented, called the learned Born series (LBS), which is derived from a convergent Born Series but its components are found through training. The LBS is shown to be significantly more accurate than the convergent Born series for the same number of iterations, in the presence of high contrast scatterers, while maintaining a comparable computational com…
▽ More
A new method for solving the wave equation is presented, called the learned Born series (LBS), which is derived from a convergent Born Series but its components are found through training. The LBS is shown to be significantly more accurate than the convergent Born series for the same number of iterations, in the presence of high contrast scatterers, while maintaining a comparable computational complexity. The LBS is able to generate a reasonable prediction of the global pressure field with a small number of iterations, and the errors decrease with the number of learned iterations.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Transcranial ultrasound simulation with uncertainty estimation
Authors:
Antonio Stanziola,
José A. Pineda-Pardo,
Bradley Treeby
Abstract:
Transcranial ultrasound simulations are increasingly used to predict in situ exposure parameters for ultrasound therapies in the brain. However, there can be considerable uncertainty in estimating the acoustic medium properties of the skull and brain from computed tomography (CT) images. Here, we show how the resulting uncertainty in the simulated acoustic field can be predicted in a computational…
▽ More
Transcranial ultrasound simulations are increasingly used to predict in situ exposure parameters for ultrasound therapies in the brain. However, there can be considerable uncertainty in estimating the acoustic medium properties of the skull and brain from computed tomography (CT) images. Here, we show how the resulting uncertainty in the simulated acoustic field can be predicted in a computationally efficient way using linear uncertainty propagation. Results for a representative transcranial simulation using a focused bowl transducer at 500 kHz show good agreement with unbiased uncertainty estimates obtained using Monte Carlo.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Experiments and simulations demonstrating the rapid ultrasonic rewarming of frozen beef cryovials
Authors:
Rui Xu,
Bradley E. Treeby,
Eleanor Martin
Abstract:
The development of methods to safely rewarm large volume cryopreserved biological samples remains a barrier to the widespread adoption of cryopreservation. Here, experiments and simulations were performed to demonstrate that ultrasound can increase rewarming rates relative to thermal conduction alone. An ultrasonic rewarming setup based on a custom 444 kHz tubular piezoelectric transducer was desi…
▽ More
The development of methods to safely rewarm large volume cryopreserved biological samples remains a barrier to the widespread adoption of cryopreservation. Here, experiments and simulations were performed to demonstrate that ultrasound can increase rewarming rates relative to thermal conduction alone. An ultrasonic rewarming setup based on a custom 444 kHz tubular piezoelectric transducer was designed, characterized, and tested with 2 mL cryovials filled with frozen ground beef. Rewarming rates were characterized in the -20$^{\circ}$C to 5$^{\circ}$C range. Thermal conduction-based rewarming was compared to thermal conduction plus ultrasonic rewarming, demonstrating a ten-fold increase in rewarming rate when ultrasound was applied. The maximum recorded rewarming rate with ultrasound was 57$^{\circ}$C per minute, approximately 2.5 times faster than with thermal conduction alone. Coupled acoustic and thermal simulations were developed and showed good agreement with the heating rates demonstrated experimentally and were also used to demonstrate spatial heating distributions with small ($<$3$^{\circ}$C) temperature differentials throughout the sample when the sample was below 0$^{\circ}$C. The experiments and simulations performed in this work demonstrate the potential for ultrasound as a rewarming method for cryopreserved tissues, as faster rewarming rates may improve the viability of cryopreserved tissues and reduce the time needed for cells to regain normal function.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
Binary Volume Acoustic Holograms
Authors:
Michael D. Brown,
Ben T. Cox,
Bradley E. Treeby
Abstract:
In recent years high-resolution 3D printing has enabled a diverse range of new, low-cost, methods for ultrasonic wave-front sha**. Acoustic holograms, particularly, allow for the generation of arbitrary, diffraction limited, acoustic fields at MHz frequencies from single element transducers. These are phase plates that function as direct acoustic analogues to thin optical holograms. In this work…
▽ More
In recent years high-resolution 3D printing has enabled a diverse range of new, low-cost, methods for ultrasonic wave-front sha**. Acoustic holograms, particularly, allow for the generation of arbitrary, diffraction limited, acoustic fields at MHz frequencies from single element transducers. These are phase plates that function as direct acoustic analogues to thin optical holograms. In this work it is shown that, by using multiple polymer 3D printing, acoustic analogues to 'thick' or volume optical holograms can also be generated. First, an analytic approach for designing a volume hologram that diffracts a set of input fields onto a desired set of output fields is briefly summarised. Next, a greedy optimisation approach based on random downhill binary search able to account for the constraints imposed by the chosen fabrication method is introduced. Finally, an experimental test-case designed to diffract the field generated by a 2.54 cm, planar, PZT transducer onto 8 distinct patterns dependent on the direction of the incident field is used to validate the approach and the design method. Field scans of the 8 target fields demonstrate that acoustic analogues of optical volume holograms can be generated using multi-polymer printing and that these allow the multiplexing of distinct fields onto different incident field directions.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
j-Wave: An open-source differentiable wave simulator
Authors:
Antonio Stanziola,
Simon R. Arridge,
Ben T. Cox,
Bradley E. Treeby
Abstract:
We present an open-source differentiable acoustic simulator, j-Wave, which can solve time-varying and time-harmonic acoustic problems. It supports automatic differentiation, which is a program transformation technique that has many applications, especially in machine learning and scientific computing. j-Wave is composed of modular components that can be easily customized and reused. At the same ti…
▽ More
We present an open-source differentiable acoustic simulator, j-Wave, which can solve time-varying and time-harmonic acoustic problems. It supports automatic differentiation, which is a program transformation technique that has many applications, especially in machine learning and scientific computing. j-Wave is composed of modular components that can be easily customized and reused. At the same time, it is compatible with some of the most popular machine learning libraries, such as JAX and TensorFlow. The accuracy of the simulation results for known configurations is evaluated against the widely used k-Wave toolbox and a cohort of acoustic simulation software. j-Wave is available from https://github.com/ucl-bug/jwave.
△ Less
Submitted 30 June, 2022;
originally announced July 2022.
-
Classical and learned MR to pseudo-CT map**s for accurate transcranial ultrasound simulation
Authors:
Maria Miscouridou,
José A. Pineda-Pardo,
Charlotte J. Stagg,
Bradley E. Treeby,
Antonio Stanziola
Abstract:
Model-based treatment planning for transcranial ultrasound therapy typically involves map** the acoustic properties of the skull from an x-ray computed tomography (CT) image of the head. Here, three methods for generating pseudo-CT images from magnetic resonance (MR) images were compared as an alternative to CT. A convolutional neural network (U-Net) was trained on paired MR-CT images to generat…
▽ More
Model-based treatment planning for transcranial ultrasound therapy typically involves map** the acoustic properties of the skull from an x-ray computed tomography (CT) image of the head. Here, three methods for generating pseudo-CT images from magnetic resonance (MR) images were compared as an alternative to CT. A convolutional neural network (U-Net) was trained on paired MR-CT images to generate pseudo-CT images from either T1-weighted or zero-echo time (ZTE) MR images (denoted tCT and zCT, respectively). A direct map** from ZTE to pseudo-CT was also implemented (denoted cCT). When comparing the pseudo-CT and ground truth CT images for the test set, the mean absolute error was 133, 83, and 145 Hounsfield units (HU) across the whole head, and 398, 222, and 336 HU within the skull for the tCT, zCT, and cCT images, respectively. Ultrasound simulations were also performed using the generated pseudo-CT images and compared to simulations based on CT. An annular array transducer was used targeting the visual or motor cortex. The mean differences in the simulated focal pressure, focal position, and focal volume were 9.9%, 1.5 mm, and 15.1% for simulations based on the tCT images, 5.7%, 0.6 mm, and 5.7% for the zCT, and 6.7%, 0.9 mm, and 12.1% for the cCT. The improved results for images mapped from ZTE highlight the advantage of using imaging sequences which improve contrast of the skull bone. Overall, these results demonstrate that acoustic simulations based on MR images can give comparable accuracy to those based on CT.
△ Less
Submitted 24 October, 2022; v1 submitted 30 June, 2022;
originally announced June 2022.
-
Benchmark problems for transcranial ultrasound simulation: Intercomparison of compressional wave models
Authors:
Jean-Francois Aubry,
Oscar Bates,
Christian Boehm,
Kim Butts Pauly,
Douglas Christensen,
Carlos Cueto,
Pierre Gelat,
Lluis Guasch,
Jiri Jaros,
Yun **g,
Rebecca Jones,
Ningrui Li,
Patrick Marty,
Hazael Montanaro,
Esra Neufeld,
Samuel Pichardo,
Gianmarco Pinton,
Aki Pulkkinen,
Antonio Stanziola,
Axel Thielscher,
Bradley Treeby,
Elwin van 't Wout
Abstract:
Computational models of acoustic wave propagation are frequently used in transcranial ultrasound therapy, for example, to calculate the intracranial pressure field or to calculate phase delays to correct for skull distortions. To allow intercomparison between the different modeling tools and techniques used by the community, an international working group was convened to formulate a set of numeric…
▽ More
Computational models of acoustic wave propagation are frequently used in transcranial ultrasound therapy, for example, to calculate the intracranial pressure field or to calculate phase delays to correct for skull distortions. To allow intercomparison between the different modeling tools and techniques used by the community, an international working group was convened to formulate a set of numerical benchmarks. Here, these benchmarks are presented, along with intercomparison results. Nine different benchmarks of increasing geometric complexity are defined. These include a single-layer planar bone immersed in water, a multi-layer bone, and a whole skull. Two transducer configurations are considered (a focused bowl and a plane piston), giving a total of 18 permutations of the benchmarks. Eleven different modeling tools are used to compute the benchmark results. The models span a wide range of numerical techniques, including the finite-difference time-domain method, angular-spectrum method, pseudospectral method, boundary-element method, and spectral-element method. Good agreement is found between the models, particularly for the position, size, and magnitude of the acoustic focus within the skull. When comparing results for each model with every other model in a cross comparison, the median values for each benchmark for the difference in focal pressure and position are less than 10\% and 1 mm, respectively. The benchmark definitions, model results, and intercomparison codes are freely available to facilitate further comparisons.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
A research framework for writing differentiable PDE discretizations in JAX
Authors:
Antonio Stanziola,
Simon R. Arridge,
Ben T. Cox,
Bradley E. Treeby
Abstract:
Differentiable simulators are an emerging concept with applications in several fields, from reinforcement learning to optimal control. Their distinguishing feature is the ability to calculate analytic gradients with respect to the input parameters. Like neural networks, which are constructed by composing several building blocks called layers, a simulation often requires computing the output of an…
▽ More
Differentiable simulators are an emerging concept with applications in several fields, from reinforcement learning to optimal control. Their distinguishing feature is the ability to calculate analytic gradients with respect to the input parameters. Like neural networks, which are constructed by composing several building blocks called layers, a simulation often requires computing the output of an operator that can itself be decomposed into elementary units chained together. While each layer of a neural network represents a specific discrete operation, the same operator can have multiple representations, depending on the discretization employed and the research question that needs to be addressed. Here, we propose a simple design pattern to construct a library of differentiable operators and discretizations, by representing operators as map**s between families of continuous functions, parametrized by finite vectors. We demonstrate the approach on an acoustic optimization problem, where the Helmholtz equation is discretized using Fourier spectral methods, and differentiability is demonstrated using gradient descent to optimize the speed of sound of an acoustic lens. The proposed framework is open-sourced and available at \url{https://github.com/ucl-bug/jaxdf}
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
High Resolution 3D Ultrasonic Breast Imaging by Time-Domain Full Waveform Inversion
Authors:
Felix Lucka,
Mailyn Pérez-Liva,
Bradley E. Treeby,
Ben T. Cox
Abstract:
Ultrasound tomography (UST) scanners allow quantitative images of the human breast's acoustic properties to be derived with potential applications in screening, diagnosis and therapy planning. Time domain full waveform inversion (TD-FWI) is a promising UST image formation technique that fits the parameter fields of a wave physics model by gradient-based optimization. For high resolution 3D UST, it…
▽ More
Ultrasound tomography (UST) scanners allow quantitative images of the human breast's acoustic properties to be derived with potential applications in screening, diagnosis and therapy planning. Time domain full waveform inversion (TD-FWI) is a promising UST image formation technique that fits the parameter fields of a wave physics model by gradient-based optimization. For high resolution 3D UST, it holds three key challenges: Firstly, its central building block, the computation of the gradient for a single US measurement, has a restrictively large memory footprint. Secondly, this building block needs to be computed for each of the $10^3-10^4$ measurements, resulting in a massive parallel computation usually performed on large computational clusters for days. Lastly, the structure of the underlying optimization problem may result in slow progression of the solver and convergence to a local minimum. In this work, we design and evaluate a comprehensive computational strategy to overcome these challenges: Firstly, we exploit a gradient computation based on time reversal that dramatically reduces the memory footprint at the expense of one additional wave simulation per source. Secondly, we break the dependence on the number of measurements by using source encoding (SE) to compute stochastic gradient estimates. Also we describe a more accurate, TD-specific SE technique with a finer variance control and use a state-of-the-art stochastic LBFGS method. Lastly, we design an efficient TD multi-grid scheme together with preconditioning to speed up the convergence while avoiding local minima. All components are evaluated in extensive numerical proof-of-concept studies simulating a bowl-shaped 3D UST breast scanner prototype. Finally, we demonstrate that their combination allows us to obtain an accurate 442x442x222 voxel image with a resolution of 0.5mm using Matlab on a single GPU within 24h.
△ Less
Submitted 20 September, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
A Helmholtz equation solver using unsupervised learning: Application to transcranial ultrasound
Authors:
Antonio Stanziola,
Simon R. Arridge,
Ben T. Cox,
Bradley E. Treeby
Abstract:
Transcranial ultrasound therapy is increasingly used for the non-invasive treatment of brain disorders. However, conventional numerical wave solvers are currently too computationally expensive to be used online during treatments to predict the acoustic field passing through the skull (e.g., to account for subject-specific dose and targeting variations). As a step towards real-time predictions, in…
▽ More
Transcranial ultrasound therapy is increasingly used for the non-invasive treatment of brain disorders. However, conventional numerical wave solvers are currently too computationally expensive to be used online during treatments to predict the acoustic field passing through the skull (e.g., to account for subject-specific dose and targeting variations). As a step towards real-time predictions, in the current work, a fast iterative solver for the heterogeneous Helmholtz equation in 2D is developed using a fully-learned optimizer. The lightweight network architecture is based on a modified UNet that includes a learned hidden state. The network is trained using a physics-based loss function and a set of idealized sound speed distributions with fully unsupervised training (no knowledge of the true solution is required). The learned optimizer shows excellent performance on the test set, and is capable of generalization well outside the training examples, including to much larger computational domains, and more complex source and sound speed distributions, for example, those derived from x-ray computed tomography images of the skull.
△ Less
Submitted 18 June, 2021; v1 submitted 29 October, 2020;
originally announced October 2020.
-
Pseudospectral time-domain (PSTD) methods for the wave equation: Realising boundary conditions with discrete sine and cosine transforms
Authors:
E. S. Wise,
J. Jaros,
B. T. Cox,
B. E. Treeby
Abstract:
Pseudospectral time domain (PSTD) methods are widely used in many branches of acoustics for the numerical solution of the wave equation, including biomedical ultrasound and seismology. The use of the Fourier collocation spectral method in particular has many computational advantages. However, the use of a discrete Fourier basis is also inherently restricted to solving problems with periodic bounda…
▽ More
Pseudospectral time domain (PSTD) methods are widely used in many branches of acoustics for the numerical solution of the wave equation, including biomedical ultrasound and seismology. The use of the Fourier collocation spectral method in particular has many computational advantages. However, the use of a discrete Fourier basis is also inherently restricted to solving problems with periodic boundary conditions. Here, a family of spectral collocation methods based on the use of a sine or cosine basis is described. These retain the computational advantages of the Fourier collocation method but instead allow homogeneous Dirichlet (sound-soft) and Neumann (sound-hard) boundary conditions to be imposed. The basis function weights are computed numerically using the discrete sine and cosine transforms, which can be implemented using O(N log N) operations analogous to the fast Fourier transform. Practical details of how to implement spectral methods using discrete sine and cosine transforms are provided. The technique is then illustrated through the solution of the wave equation in a rectangular domain subject to different combinations of boundary conditions. The extension to boundaries with arbitrary real reflection coefficients or boundaries that are non-reflecting is also demonstrated using the weighted summation of the solutions with Dirichlet and Neumann boundary conditions.
△ Less
Submitted 2 December, 2020; v1 submitted 1 May, 2020;
originally announced May 2020.
-
Transurethral ultrasound therapy of the prostate in the presence of calcifications: A simulation study
Authors:
Visa Suomi,
Bradley Treeby,
Jiri Jaros,
Pietari Makela,
Mikael Anttinen,
Jani Saunavaara,
Teija Sainio,
Aida Kiviniemi,
Roberto Blanco
Abstract:
Purpose: Transurethral ultrasound therapy is an investigational treatment modality which could potentially be used for the localized treatment of prostate cancer. One of the limiting factors of this therapy is prostatic calcifications. These attenuate and reflect ultrasound and thus reduce the efficacy of the heating. The aim of this study is to investigate how prostatic calcifications affect ther…
▽ More
Purpose: Transurethral ultrasound therapy is an investigational treatment modality which could potentially be used for the localized treatment of prostate cancer. One of the limiting factors of this therapy is prostatic calcifications. These attenuate and reflect ultrasound and thus reduce the efficacy of the heating. The aim of this study is to investigate how prostatic calcifications affect therapeutic efficacy, and to identify the best sonication strategy when calcifications are present. Methods: Realistic computational models were used on clinical patient data in order to simulate different therapeutic situations with naturally occurring calcifications as well as artificial calcifications of different sizes (1-10 mm) and distances (5-15 mm). Furthermore, different sonication strategies were tested in order to deliver therapy to the untreated tissue regions behind the calcifications. Results: The presence of calcifications in front of the ultrasound field was found to increase the peak pressure by 100% on average while the maximum temperature only rose by 9% during a 20-s sonication. Losses in ultrasound energy were due to the relatively large acoustic impedance mismatch between the prostate tissue and the calcifications (1.63 vs 3.20 MRayl) and high attenuation coefficient (0.78 vs 2.64 dB/MHz^1.1/cm), which together left untreated tissue regions behind the calcifications. In addition, elevated temperatures were seen in the region between the transducer and the calcifications. Lower sonication frequencies (1-4 MHz) were not able to penetrate through the calcifications effectively, but longer sonication durations (20-60 s) with selective transducer elements were effective in treating the tissue regions behind the calcifications.
△ Less
Submitted 29 September, 2019;
originally announced September 2019.
-
ElasticMatrix: A MATLAB Toolbox for Anisotropic Elastic Wave Propagation in Layered Media
Authors:
Danny R. Ramasawmy,
Ben T. Cox,
Bradley E. Treeby
Abstract:
Simulating the propagation of elastic waves in multi-layered media has many applications. A common approach is to use matrix methods where the elastic wave-field within each material layer is represented by a sum of partial-waves along with boundary conditions imposed at each interface. While these methods are well-known, coding the required matrix formation, inversion, and analysis for general mu…
▽ More
Simulating the propagation of elastic waves in multi-layered media has many applications. A common approach is to use matrix methods where the elastic wave-field within each material layer is represented by a sum of partial-waves along with boundary conditions imposed at each interface. While these methods are well-known, coding the required matrix formation, inversion, and analysis for general multi-layered systems is non-trivial and time-consuming. Here, a new open-source toolbox called ElasticMatrix is described which solves the problem of acoustic and elastic wave propagation in multi-layered media for isotropic and transverse-isotropic materials where the wave propagation occurs in a material plane of symmetry. The toolbox is implemented in MATLAB using an object oriented programming framework and is designed to be easy to use and extend. Methods are provided for calculating and plotting dispersion curves, displacement and stress fields, reflection and transmission coefficients, and slowness profiles.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
The effect of tissue physiological variability on transurethral ultrasound therapy of the prostate
Authors:
Visa Suomi,
Bradley Treeby,
Jiri Jaros,
Jani Saunavaara,
Aida Kiviniemi,
Roberto Blanco
Abstract:
Therapeutic ultrasound is an investigational modality which could potentially be used for minimally invasive treatment of prostate cancer. Computational simulations were used to study the effect of natural physiological variations in tissue parameters on the efficacy of therapeutic ultrasound treatment in the prostate. The simulations were conducted on a clinical ultrasound therapy system using pa…
▽ More
Therapeutic ultrasound is an investigational modality which could potentially be used for minimally invasive treatment of prostate cancer. Computational simulations were used to study the effect of natural physiological variations in tissue parameters on the efficacy of therapeutic ultrasound treatment in the prostate. The simulations were conducted on a clinical ultrasound therapy system using patient computed tomography (CT) data. The values of attenuation, perfusion, specific heat capacity and thermal conductivity were changed within their biological ranges to determine their effect on peak temperature and thermal dose volume. Increased attenuation was found to have the biggest effect on peak temperature with a 6.9% rise. The smallest effect was seen with perfusion with +-0.2% variation in peak temperature. Thermal dose was mostly affected by specific heat capacity which showed a 20.7% increase in volume with reduced heat capacity. Thermal conductivity had the smallest effect on thermal dose with up to 2.1% increase in the volume with reduced thermal conductivity. These results can be used to estimate the interpatient variation during the therapeutic ultrasound treatment of the prostate.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
Nonstandard Fourier Pseudospectral Time Domain (PSTD) Schemes for Partial Differential Equations
Authors:
Bradley E. Treeby,
Elliott S. Wise,
B. T. Cox
Abstract:
A class of nonstandard pseudospectral time domain (PSTD) schemes for solving time-dependent hyperbolic and parabolic partial differential equations (PDEs) is introduced. These schemes use the Fourier collocation spectral method to compute spatial gradients and a nonstandard finite difference scheme to integrate forwards in time. The modified denominator function that makes the finite difference ti…
▽ More
A class of nonstandard pseudospectral time domain (PSTD) schemes for solving time-dependent hyperbolic and parabolic partial differential equations (PDEs) is introduced. These schemes use the Fourier collocation spectral method to compute spatial gradients and a nonstandard finite difference scheme to integrate forwards in time. The modified denominator function that makes the finite difference time scheme exact is transformed into the spatial frequency domain or k-space using the dispersion relation for the governing PDE. This allows the correction factor to be applied in the spatial frequency domain as part of the spatial gradient calculation. The derived schemes can be formulated to be unconditionally stable, and apply to PDEs in any space dimension. Examples of the resulting nonstandard PSTD schemes for several PDEs are given, including the wave equation, diffusion equation, and convection-diffusion equation.
△ Less
Submitted 22 March, 2018; v1 submitted 9 September, 2017;
originally announced September 2017.
-
Full modelling of high-intensity focused ultrasound and thermal heating in the kidney using realistic patient models
Authors:
Visa Suomi,
Jiri Jaros,
Bradley Treeby,
Robin Cleveland
Abstract:
Objective: High-intensity focused ultrasound (HIFU) therapy can be used for non-invasive treatment of kidney (renal) cancer, but the clinical outcomes have been variable. In this study, the efficacy of renal HIFU therapy was studied using nonlinear acoustic and thermal simulations in three patients. Methods: The acoustic simulations were conducted with and without refraction in order to investigat…
▽ More
Objective: High-intensity focused ultrasound (HIFU) therapy can be used for non-invasive treatment of kidney (renal) cancer, but the clinical outcomes have been variable. In this study, the efficacy of renal HIFU therapy was studied using nonlinear acoustic and thermal simulations in three patients. Methods: The acoustic simulations were conducted with and without refraction in order to investigate its effect on the shape, size and pressure distribution at the focus. The values for the attenuation, sound speed, perfusion and thermal conductivity of the kidney were varied over the reported ranges to determine the effect of variability on heating. Furthermore, the phase aberration was studied in order to quantify the underlying phase shifts using a second order polynomial function. Results: The ultrasound field intensity was found to drop on average 11.1 dB with refraction and 6.4 dB without refraction. Reflection at tissue interfaces was found to result in a loss less than 0.1 dB. Focal point splitting due to refraction significantly reduced the heating efficacy. Perfusion did not have a large effect on heating during short sonication durations. Small changes in temperature were seen with varying attenuation and thermal conductivity, but no visible changes were present with sound speed variations. The aberration study revealed an underlying trend in the spatial distribution of the phase shifts. Conclusion: The results show that the efficacy of HIFU therapy in the kidney could be improved with aberration correction. Significance: A method is proposed by which patient specific pre-treatment calculations could be used to overcome the aberration and therefore make ultrasound treatment possible.
△ Less
Submitted 8 October, 2018; v1 submitted 9 August, 2017;
originally announced August 2017.
-
Mesh density functions based on local bandwidth applied to moving mesh methods
Authors:
Elliott S. Wise,
Ben T. Cox,
Bradley E. Treeby
Abstract:
Moving mesh methods provide an efficient way of solving partial differential equations for which large, localised variations in the solution necessitate locally dense spatial meshes. In one-dimension, meshes are typically specified using the arclength mesh density function. This choice is well-justified for piecewise polynomial interpolants, but it is only justified for spectral methods when model…
▽ More
Moving mesh methods provide an efficient way of solving partial differential equations for which large, localised variations in the solution necessitate locally dense spatial meshes. In one-dimension, meshes are typically specified using the arclength mesh density function. This choice is well-justified for piecewise polynomial interpolants, but it is only justified for spectral methods when model solutions include localised steep gradients. In this paper, one-dimensional mesh density functions are presented which are based on a spatially localised measure of the bandwidth of the approximated model solution. In considering bandwidth, these mesh density functions are well-justified for spectral methods, but are not strictly tied to the error properties of any particular spatial interpolant, and are hence widely applicable. The bandwidth mesh density functions are demonstrated by applying periodic spectral and finite-difference moving mesh methods to a number of model problems in acoustics. These problems include a heterogeneous advection equation, the viscous Burgers' equation, and the Korteweg-de Vries equation. Simulation results demonstrate solution convergence rates that are up to an order of magnitude faster using the bandwidth mesh density functions than uniform meshes, and around three times faster than those using the arclength mesh density function.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Nonlinear 3-D simulation of high-intensity focused ultrasound therapy in the kidney
Authors:
Visa Suomi,
Jiri Jaros,
Bradley Treeby,
Robin Cleveland
Abstract:
Kidney cancer is a severe disease which can be treated non-invasively using high-intensity focused ultrasound (HIFU) therapy. However, tissue in front of the transducer and the deep location of kidney can cause significant losses to the efficiency of the treatment. The effect of attenuation, refraction and reflection due to different tissue types on HIFU therapy of the kidney was studied using a n…
▽ More
Kidney cancer is a severe disease which can be treated non-invasively using high-intensity focused ultrasound (HIFU) therapy. However, tissue in front of the transducer and the deep location of kidney can cause significant losses to the efficiency of the treatment. The effect of attenuation, refraction and reflection due to different tissue types on HIFU therapy of the kidney was studied using a nonlinear ultrasound simulation model. The geometry of the tissue was derived from a computed tomography (CT) dataset of a patient which had been segmented for water, bone, soft tissue, fat and kidney. The combined effect of inhomogeneous attenuation and sound-speed was found to result in an 11.0 dB drop in spatial peak-temporal average (SPTA) intensity in the kidney compared to pure water. The simulation without refraction effects showed a 6.3 dB decrease indicating that both attenuation and refraction contribute to the loss in focal intensity. The losses due to reflections at soft tissue interfaces were less than 0.1 dB. Focal point shifting due to refraction effects resulted in -1.3, 2.6 and 1.3 mm displacements in x-, y- and z-directions respectively. Furthermore, focal point splitting into several smaller subvolumes was observed. The total volume of the secondary focal points was approximately 46% of the largest primary focal point. This could potentially lead to undesired heating outside the target location and longer therapy times.
△ Less
Submitted 31 August, 2016;
originally announced August 2016.
-
On the Adjoint Operator in Photoacoustic Tomography
Authors:
Simon R. Arridge,
Marta M. Betcke,
Ben T. Cox,
Felix Lucka,
Brad E. Treeby
Abstract:
Photoacoustic Tomography (PAT) is an emerging biomedical "imaging from coupled physics" technique, in which the image contrast is due to optical absorption, but the information is carried to the surface of the tissue as ultrasound pulses. Many algorithms and formulae for PAT image reconstruction have been proposed for the case when a complete data set is available. In many practical imaging scenar…
▽ More
Photoacoustic Tomography (PAT) is an emerging biomedical "imaging from coupled physics" technique, in which the image contrast is due to optical absorption, but the information is carried to the surface of the tissue as ultrasound pulses. Many algorithms and formulae for PAT image reconstruction have been proposed for the case when a complete data set is available. In many practical imaging scenarios, however, it is not possible to obtain the full data, or the data may be sub-sampled for faster data acquisition. In such cases, image reconstruction algorithms that can incorporate prior knowledge to ameliorate the loss of data are required. Hence, recently there has been an increased interest in using variational image reconstruction. A crucial ingredient for the application of these techniques is the adjoint of the PAT forward operator, which is described in this article from physical, theoretical and numerical perspectives. First, a simple mathematical derivation of the adjoint of the PAT forward operator in the continuous framework is presented. Then, an efficient numerical implementation of the adjoint using a k-space time domain wave propagation model is described and illustrated in the context of variational PAT image reconstruction, on both 2D and 3D examples including inhomogeneous sound speed. The principal advantage of this analytical adjoint over an algebraic adjoint (obtained by taking the direct adjoint of the particular numerical forward scheme used) is that it can be implemented using currently available fast wave propagation solvers.
△ Less
Submitted 1 August, 2016; v1 submitted 5 February, 2016;
originally announced February 2016.
-
Full-wave nonlinear ultrasound simulation on distributed clusters with applications in high-intensity focused ultrasound
Authors:
Jiri Jaros,
Alistair P. Rendell,
Bradley E. Treeby
Abstract:
Model-based treatment planning and exposimetry for high-intensity focused ultrasound (HIFU) requires the numerical simulation of nonlinear ultrasound propagation through heterogeneous and absorbing media. This is a computationally demanding problem due to the large distances travelled by the ultrasound waves relative to the wavelength of the highest frequency harmonic. Here, the k-space pseudospec…
▽ More
Model-based treatment planning and exposimetry for high-intensity focused ultrasound (HIFU) requires the numerical simulation of nonlinear ultrasound propagation through heterogeneous and absorbing media. This is a computationally demanding problem due to the large distances travelled by the ultrasound waves relative to the wavelength of the highest frequency harmonic. Here, the k-space pseudospectral method is used to solve a set of coupled partial differential equations equivalent to a generalised Westervelt equation. The model is implemented in C++ and parallelised using the message passing interface (MPI) for solving large-scale problems on distributed clusters. The domain is partitioned using a 1D slab decomposition, and global communication is performed using a sparse communication pattern. Operations in the spatial frequency domain are performed in transposed space to reduce the communication burden imposed by the 3D fast Fourier transform. The performance of the model is evaluated using grid sizes up to 4096 x 2048 x 2048 grid points distributed over a cluster using up to 1024 compute cores. Given the global nature of the gradient calculation, the model shows good strong scaling behaviour, with a speed-up of 1.7x whenever the number of cores is doubled. This means large-scale simulations can be distributed across high numbers of cores on a cluster to minimise execution times with a relatively small computational overhead. The efficacy of the model is demonstrated by simulating the ultrasound beam pattern for a HIFU sonication of the kidney.
△ Less
Submitted 20 August, 2014;
originally announced August 2014.
