-
Low intensity noise high-power tunable fiber-based laser around 1007 nm
Authors:
Benoît Gouhier,
Clément Dixneuf,
Adèle Hilico,
Germain Guiraud,
Nicholas Traynor,
Giorgio Santarelli
Abstract:
We report the development of a tunable, low-noise, all-fiber, single-frequency, linearly polarized high-power master oscillator power amplifier operating over 20 nm, from 1017 nm down to 997 nm. Using Ytterbium highly-doped silica fiber with large mode area, more than 3 W of 997 nm signal was obtained with less than 2 % of ASE. These figures keep improving with operating wavelength, to reach more…
▽ More
We report the development of a tunable, low-noise, all-fiber, single-frequency, linearly polarized high-power master oscillator power amplifier operating over 20 nm, from 1017 nm down to 997 nm. Using Ytterbium highly-doped silica fiber with large mode area, more than 3 W of 997 nm signal was obtained with less than 2 % of ASE. These figures keep improving with operating wavelength, to reach more than 16 W and 0.03 % of ASE at 1017 nm. The optical signal to noise ratio exceeds 40dB for the worst case up to more than 60dB. In addition, relative intensity noise remains very low over the whole tuning range (-130dBc@10kHz) down to-160dBc at 10 MHz. This robust laser has a strong potential to be a new workhorse for demanding applications in this spectral range.
△ Less
Submitted 24 May, 2019;
originally announced May 2019.
-
Watt-level green random laser at 532 nm by SHG of a Yb-doped fiber laser
Authors:
S. Rota-Rodrigo,
B. Gouhier,
C. Dixneuf,
L. Antoni-Micollier,
G. Guiraud,
D. Leandro,
M. Lopez-Amo,
N. Traynor,
G. Santarelli
Abstract:
We have developed a Watt-level random laser at 532 nm. The laser is based on a 1064 nm random distributed ytterbium-gain assisted fiber laser seed with a 0.35 nm line-width 900mW polarized output power. A study for the optimal length of the random distributed mirror was carried out. An ytterbium-doped fiber master oscillator power amplifier architecture is used to amplify the random seeder laser w…
▽ More
We have developed a Watt-level random laser at 532 nm. The laser is based on a 1064 nm random distributed ytterbium-gain assisted fiber laser seed with a 0.35 nm line-width 900mW polarized output power. A study for the optimal length of the random distributed mirror was carried out. An ytterbium-doped fiber master oscillator power amplifier architecture is used to amplify the random seeder laser without additional spectral broadening up to 20 W. By using a periodically poled lithium niobate (PPLN) crystal in a single pass configuration we generate in excess of 1 W random laser at 532 nm by second harmonic generation with an efficiency of 9 %. The green random laser exhibits an instability <1 %, optical signal to noise ratio >70 dB, 0.1 nm linewidth and excellent beam quality.
△ Less
Submitted 29 March, 2019;
originally announced March 2019.
-
High-power all-fiber ultra-low noise laser
Authors:
Jian Zhao,
Germain Guiraud,
Christophe Pierre,
Florian Floissat,
Alexis Casanova,
Ali Hreibi,
Walid Chaibi,
Nicholas Traynor,
Johan Boullet,
Giorgio Santarelli
Abstract:
High-power ultra-low noise single-mode single-frequency lasers are in great demand for interferometric metrology. Robust, compact all-fiber lasers represent one of the most promising technologies to replace the current laser sources in use based on injection-locked ring resonators or multi-stage solid-state amplifiers. Here, a linearly-polarized high-power ultra-low noise all-fiber laser is demons…
▽ More
High-power ultra-low noise single-mode single-frequency lasers are in great demand for interferometric metrology. Robust, compact all-fiber lasers represent one of the most promising technologies to replace the current laser sources in use based on injection-locked ring resonators or multi-stage solid-state amplifiers. Here, a linearly-polarized high-power ultra-low noise all-fiber laser is demonstrated at a power level of 100 W. Special care has been taken in the study of relative intensity noise (RIN) and its reduction. Using an optimized servo actuator to directly control the driving current of the pump laser diode (LD), we obtain a large feedback bandwidth of up to 1.3 MHz. The RIN reaches-160 dBc/Hz between 3 kHz and 20 kHz.
△ Less
Submitted 23 May, 2018;
originally announced May 2018.
-
Watt-level single-frequency tunable Neodymium MOPA fiber laser operating at 915-937 nm
Authors:
Sergio Rota-Rodrigo,
Benoit Gouhier,
Mathieu Laroche,
Jian Zhao,
Benjamin Canuel,
Andrea Bertoldi,
Philippe Bouyer,
Nicholas Traynor,
Benoit Cadier,
Thierry Robin,
Giorgio Santarelli
Abstract:
We have developed a Watt-level single-frequency tunable fiber laser in the 915-937 nm spectral window. The laser is based on a neodymium-doped fiber master oscillator power amplifier architecture, with two amplification stages using a 20 mW extended cavity diode laser as seed. The system output power is higher than 2 W from 921 to 933 nm, with a stability better than 1.4 percent and a low relative…
▽ More
We have developed a Watt-level single-frequency tunable fiber laser in the 915-937 nm spectral window. The laser is based on a neodymium-doped fiber master oscillator power amplifier architecture, with two amplification stages using a 20 mW extended cavity diode laser as seed. The system output power is higher than 2 W from 921 to 933 nm, with a stability better than 1.4 percent and a low relative intensity noise.
△ Less
Submitted 20 November, 2017;
originally announced November 2017.
-
Magnetism in artificial Ruddlesden-Popper iridates leveraged by structural distortions
Authors:
D. Meyers,
Yue Cao,
G. Fabbris,
Neil J. Robinson,
Lin Hao,
C. Frederick,
N. Traynor,
J. Yang,
Jiaqi Lin,
M. H. Upton,
D. Casa,
Jong-Woo Kim,
T. Gog,
E. Karapetrova,
Yongseong Choi,
D. Haskel,
P. J. Ryan,
Lukas Horak,
X. Liu,
Jian Liu,
M. P. M. Dean
Abstract:
We report on the tuning of magnetic interactions in superlattices composed of single and bilayer SrIrO$_3$ inter-spaced with SrTiO$_3$. Magnetic scattering shows predominately $c$-axis antiferromagnetic orientation of the magnetic moments for the bilayer justifying these systems as viable artificial analogues of the bulk Ruddlesden-Popper series iridates. Magnon gaps are observed in both superlatt…
▽ More
We report on the tuning of magnetic interactions in superlattices composed of single and bilayer SrIrO$_3$ inter-spaced with SrTiO$_3$. Magnetic scattering shows predominately $c$-axis antiferromagnetic orientation of the magnetic moments for the bilayer justifying these systems as viable artificial analogues of the bulk Ruddlesden-Popper series iridates. Magnon gaps are observed in both superlattices, with the magnitude of the gap in the bilayer being reduced to nearly half that in its bulk structural analogue, Sr$_3$Ir$_2$O$_7$. We assign this to modifications in the anisotropic exchange driven by bending of the $c$-axis Ir-O-Ir bond and subsequent local environment changes, as detected by x-ray diffraction and modeled using spin wave theory. These findings explain how even subtle structural modulations driven by heterostructuring in iridates are leveraged by spin orbit coupling to drive large changes in the magnetic interactions.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Two-dimensional ${J}_{\rm eff}$ = 1/2 antiferromagnetic insulator unraveled from interlayer exchange coupling in artificial perovskite iridate superlattices
Authors:
L. Hao,
D. Meyers,
C. Frederick,
G. Fabbris,
J. Y. Yang,
N. Traynor,
L. Horak,
D. Kriegner,
Y. S. Choi,
J. W. Kim,
D. Haskel,
P. J. Ryan,
M. P. M. Dean,
J. Liu
Abstract:
We report an experimental investigation of the two-dimensional ${J}_{\rm eff}$ = 1/2 antiferromagnetic Mott insulator by varying the interlayer exchange coupling in [(SrIrO$_3$)$_1$, (SrTiO$_3$)$_m$] ($m$ = 1, 2 and 3) superlattices. Although all samples exhibited an insulating ground state with long-range magnetic order, temperature-dependent resistivity measurements showed a stronger insulating…
▽ More
We report an experimental investigation of the two-dimensional ${J}_{\rm eff}$ = 1/2 antiferromagnetic Mott insulator by varying the interlayer exchange coupling in [(SrIrO$_3$)$_1$, (SrTiO$_3$)$_m$] ($m$ = 1, 2 and 3) superlattices. Although all samples exhibited an insulating ground state with long-range magnetic order, temperature-dependent resistivity measurements showed a stronger insulating behavior in the $m$ = 2 and $m$ = 3 samples than the $m$ = 1 sample which displayed a clear kink at the magnetic transition. This difference indicates that the blocking effect of the excessive SrTiO$_3$ layer enhances the effective electron-electron correlation and strengthens the Mott phase. The significant reduction of the Neel temperature from 150 K for $m$ = 1 to 40 K for $m$ = 2 demonstrates that the long-range order stability in the former is boosted by a substantial interlayer exchange coupling. Resonant x-ray magnetic scattering revealed that the interlayer exchange coupling has a switchable sign, depending on the SrTiO$_3$ layer number $m$, for maintaining canting-induced weak ferromagnetism. The nearly unaltered transition temperature between the $m$ = 2 and the $m$ = 3 demonstrated that we have realized a two-dimensional antiferromagnet at finite temperatures with diminishing interlayer exchange coupling.
△ Less
Submitted 1 August, 2017; v1 submitted 14 March, 2017;
originally announced March 2017.
