-
Optical suppression of tilt-to-length coupling in the LISA long-arm interferometer
Authors:
M Chwalla,
K Danzmann,
M Dovale Álvarez,
J J Esteban Delgado,
G Fernández Barranco,
E Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Lieser,
M Perreur-Lloyd,
D I Robertson,
J M Rohr,
S Schuster,
T S Schwarze,
M Tröbs,
G Wanner,
H Ward
Abstract:
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultr…
▽ More
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultra-stable interferometer testbed has been developed in order to investigate this issue and validate mitigation strategies in a setup representative of LISA, and in this paper it is operated in the long-arm interferometer configuration. The testbed is fitted with a flat-top beam generator to simulate the beam received by a LISA spacecraft. We demonstrate a reduction of TTL coupling between this flat-top beam and a Gaussian reference beam via introducing two- and four-lens imaging systems. TTL coupling factors below $\pm 25\,μ$m/rad for beam tilts within $\pm 300\,μ$rad are obtained by careful optimization of the system. Moreover we show that the additional TTL coupling due to lateral alignment errors of elements of the imaging system can be compensated by introducing lateral shifts of the detector, and vice versa. These findings help validate the suitability of this noise-reduction technique for the LISA long-arm interferometer.
△ Less
Submitted 5 June, 2020; v1 submitted 13 February, 2020;
originally announced February 2020.
-
Micrometeoroid Events in LISA Pathfinder
Authors:
James Ira Thorpe,
Jacob Slutsky,
John Baker,
Tyson Littenberg,
Sophie Hourihane,
Nicole Pagane,
Petr Pokorny,
Diego Janches,
Michele Armano,
Heather Audley,
G. Auger,
Jonathan Baird,
Massimo Bassan,
Pierre Binetruy,
Michael Born,
D. Bortoluzzi,
N. Brandt,
M. Caleno,
A Cavalleri,
A Cesarini,
A. M. Cruise,
K. Danzmann,
M. de Deus Silva,
R. De Rosa,
L. Di Fiore
, et al. (82 additional authors not shown)
Abstract:
The zodiacal dust complex, a population of dust and small particles that pervades the Solar System, provides important insight into the formation and dynamics of planets, comets, asteroids, and other bodies. Here we present a new set of data obtained using a novel technique: direct measurements of momentum transfer to a spacecraft from individual particle impacts. This technique is made possible b…
▽ More
The zodiacal dust complex, a population of dust and small particles that pervades the Solar System, provides important insight into the formation and dynamics of planets, comets, asteroids, and other bodies. Here we present a new set of data obtained using a novel technique: direct measurements of momentum transfer to a spacecraft from individual particle impacts. This technique is made possible by the extreme precision of the instruments flown on the LISA Pathfinder spacecraft, a technology demonstrator for a future space-based gravitational wave observatory that operated near the first Sun-Earth Lagrange point from early 2016 through Summer of 2017. Using a simple model of the impacts and knowledge of the control system, we show that it is possible to detect impacts and measure properties such as the transferred momentum (related to the particle's mass and velocity), direction of travel, and location of impact on the spacecraft. In this paper, we present the results of a systematic search for impacts during 4348 hours of Pathfinder data. We report a total of 54 candidates with momenta ranging from 0.2$\,μ\textrm{Ns}$ to 230$\,μ\textrm{Ns}$. We furthermore make a comparison of these candidates with models of micrometeoroid populations in the inner solar system including those resulting from Jupiter-family comets, Oort-cloud comets, Hailey-type comets, and Asteroids. We find that our measured population is consistent with a population dominated by Jupiter-family comets with some evidence for a smaller contribution from Hailey-type comets. This is in agreement with consensus models of the zodiacal dust complex in the momentum range sampled by LISA Pathfinder.
△ Less
Submitted 2 October, 2019; v1 submitted 7 May, 2019;
originally announced May 2019.
-
Reducing tilt-to-length coupling for the LISA test mass interferometer
Authors:
M Tröbs,
S Schuster,
M Lieser,
M Zwetz,
M Chwalla,
K Danzmann,
G Fernandez Barranco,
E D Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Perreur-Lloyd,
D I Robertson,
T S Schwarze,
G Wanner,
H Ward
Abstract:
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this is a potential noise source for both the test mass interferometer and the long-arm interferometer. We have experimentally investigated TTL coupling in a setup r…
▽ More
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this is a potential noise source for both the test mass interferometer and the long-arm interferometer. We have experimentally investigated TTL coupling in a setup representative for the LISA test mass interferometer and used this system to characterise two different imaging systems (a two-lens design and a four-lens design) both designed to minimise TTL coupling. We show that both imaging systems meet the LISA requirement of +-25 um/rad for interfering beams with relative angles of up to +-300 urad. Furthermore, we found a dependency of the TTL coupling on beam properties such as the waist size and location, which we characterised both theoretically and experimentally.
△ Less
Submitted 23 November, 2017;
originally announced November 2017.
-
Towards the LISA Backlink: Experiment design for comparing optical phase reference distribution systems
Authors:
Katharina-Sophie Isleif,
Lea Bischof,
Stefan Ast,
Daniel Penkert,
Thomas S Schwarze,
Germán Fernández Barranco,
Max Zwetz,
Sonja Veith,
Jan-Simon Hennig,
Michael Tröbs,
Jens Reiche,
Oliver Gerberding,
Karsten Danzmann,
Gerhard Heinzel
Abstract:
LISA is a proposed space-based laser interferometer detecting gravitational waves by measuring distances between free-floating test masses housed in three satellites in a triangular constellation with laser links in-between. Each satellite contains two optical benches that are articulated by moving optical subassemblies for compensating the breathing angle in the constellation. The phase reference…
▽ More
LISA is a proposed space-based laser interferometer detecting gravitational waves by measuring distances between free-floating test masses housed in three satellites in a triangular constellation with laser links in-between. Each satellite contains two optical benches that are articulated by moving optical subassemblies for compensating the breathing angle in the constellation. The phase reference distribution system, also known as backlink, forms an optical bi-directional path between the intra-satellite benches.
In this work we discuss phase reference implementations with a target non-reciprocity of at most $2π\,\mathrm{μrad/\sqrt{Hz}}$, equivalent to $1\,\mathrm{pm/\sqrt{Hz}}$ for a wavelength of $1064\,\mathrm{nm}$ in the frequency band from $0.1\,\mathrm{mHz}$ to $1\,\mathrm{Hz}$. One phase reference uses a steered free beam connection, the other one a fiber together with additional laser frequencies. The noise characteristics of these implementations will be compared in a single interferometric set-up with a previously successfully tested direct fiber connection. We show the design of this interferometer created by optical simulations including ghost beam analysis, component alignment and noise estimation. First experimental results of a free beam laser link between two optical set-ups that are co-rotating by $\pm 1^\circ$ are presented. This experiment demonstrates sufficient thermal stability during rotation of less than $10^{-4}\,\mathrm{K/\sqrt{Hz}}$ at $1\,\mathrm{mHz}$ and operation of the free beam steering mirror control over more than 1 week.
△ Less
Submitted 12 January, 2018; v1 submitted 19 September, 2017;
originally announced September 2017.
-
Sub-pm/$\mathrm{\mathbf{\sqrt{\rm Hz}}}$ non-reciprocal noise in the LISA backlink fiber
Authors:
Roland Fleddermann,
Christian Diekmann,
Frank Steier,
Michael Tröbs,
Gerhard Heinzel,
Karsten Danzmann
Abstract:
The future space-based gravitational wave detector Laser Interferometer Space Antenna (LISA) requires bidirectional exchange of light between its two optical benches on board of each of its three satellites. The current baseline foresees a polarization-maintaining single-mode fiber for this backlink connection. Phase changes which are common in both directions do not enter the science measurement,…
▽ More
The future space-based gravitational wave detector Laser Interferometer Space Antenna (LISA) requires bidirectional exchange of light between its two optical benches on board of each of its three satellites. The current baseline foresees a polarization-maintaining single-mode fiber for this backlink connection. Phase changes which are common in both directions do not enter the science measurement, but differential ("non-reciprocal") phase fluctuations directly do and must thus be guaranteed to be small enough. We have built a setup consisting of a Zerodur$^{\rm TM}$ baseplate with fused silica components attached to it using hydroxide-catalysis bonding and demonstrated the reciprocity of a polarization-maintaining single-mode fiber at the 1 pm/$\sqrt{\textrm{Hz}}$ level as is required for LISA. We used balanced detection to reduce the influence of parasitic optical beams on the reciprocity measurement and a fiber length stabilization to avoid nonlinear effects in our phase measurement system (phase meter). For LISA, a different phase meter is planned to be used that does not show this nonlinearity. We corrected the influence of beam angle changes and temperature changes on the reciprocity measurement in post-processing.
△ Less
Submitted 25 September, 2017; v1 submitted 7 September, 2017;
originally announced September 2017.
-
Laser Interferometer Space Antenna
Authors:
Pau Amaro-Seoane,
Heather Audley,
Stanislav Babak,
John Baker,
Enrico Barausse,
Peter Bender,
Emanuele Berti,
Pierre Binetruy,
Michael Born,
Daniele Bortoluzzi,
Jordan Camp,
Chiara Caprini,
Vitor Cardoso,
Monica Colpi,
John Conklin,
Neil Cornish,
Curt Cutler,
Karsten Danzmann,
Rita Dolesi,
Luigi Ferraioli,
Valerio Ferroni,
Ewan Fitzsimons,
Jonathan Gair,
Lluis Gesa Bote,
Domenico Giardini
, et al. (59 additional authors not shown)
Abstract:
Following the selection of The Gravitational Universe by ESA, and the successful flight of LISA Pathfinder, the LISA Consortium now proposes a 4 year mission in response to ESA's call for missions for L3. The observatory will be based on three arms with six active laser links, between three identical spacecraft in a triangular formation separated by 2.5 million km.
LISA is an all-sky monitor and…
▽ More
Following the selection of The Gravitational Universe by ESA, and the successful flight of LISA Pathfinder, the LISA Consortium now proposes a 4 year mission in response to ESA's call for missions for L3. The observatory will be based on three arms with six active laser links, between three identical spacecraft in a triangular formation separated by 2.5 million km.
LISA is an all-sky monitor and will offer a wide view of a dynamic cosmos using Gravitational Waves as new and unique messengers to unveil The Gravitational Universe. It provides the closest ever view of the infant Universe at TeV energy scales, has known sources in the form of verification binaries in the Milky Way, and can probe the entire Universe, from its smallest scales near the horizons of black holes, all the way to cosmological scales. The LISA mission will scan the entire sky as it follows behind the Earth in its orbit, obtaining both polarisations of the Gravitational Waves simultaneously, and will measure source parameters with astrophysically relevant sensitivity in a band from below $10^{-4}\,$Hz to above $10^{-1}\,$Hz.
△ Less
Submitted 23 February, 2017; v1 submitted 2 February, 2017;
originally announced February 2017.
-
Design and construction of an optical test bed for LISA imaging systems and tilt-to-length coupling
Authors:
Michael Chwalla,
Karsten Danzmann,
Germán Fernández Barranco,
Ewan Fitzsimons,
Oliver Gerberding,
Gerhard Heinzel,
Christian J Killow,
Maike Lieser,
Michael Perreur-Lloyd,
David I Robertson,
Sönke Schuster,
Thomas S Schwarze,
Michael Tröbs,
Henry Ward,
Max Zwetz
Abstract:
The Laser Interferometer Space Antenna (LISA) is a future space-based interferometric gravitational-wave detector consisting of three spacecraft in a triangular configuration. The interferometric measurements of path length changes between satellites will be performed on optical benches in the satellites. Angular misalignments of the interfering beams couple into the length measurement and represe…
▽ More
The Laser Interferometer Space Antenna (LISA) is a future space-based interferometric gravitational-wave detector consisting of three spacecraft in a triangular configuration. The interferometric measurements of path length changes between satellites will be performed on optical benches in the satellites. Angular misalignments of the interfering beams couple into the length measurement and represent a significant noise source. Imaging systems will be used to reduce this tilt-to-length coupling.
We designed and constructed an optical test bed to experimentally investigate tilt-to-length coupling. It consists of two separate structures, a minimal optical bench and a telescope simulator. The minimal optical bench comprises the science interferometer where the local laser is interfered with light from a remote spacecraft. In our experiment, a simulated version of this received beam is generated on the telescope simulator. The telescope simulator provides a tilting beam, a reference interferometer and an additional static beam as a phase reference. The tilting beam can either be a flat-top beam or a Gaussian beam. We avoid tilt-to-length coupling in the reference interferometer by using a small photo diode placed at an image of the beam rotation point. We show that the test bed is operational with an initial measurement of tilt-to-length coupling without imaging systems.
Furthermore, we show the design of two different imaging systems whose performance will be investigated in future experiments.
△ Less
Submitted 2 December, 2016; v1 submitted 1 July, 2016;
originally announced July 2016.
-
Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of HF signals with microradian precision
Authors:
Oliver Gerberding,
Christian Diekmann,
Joachim Kullmann,
Michael Tröbs,
Ioury Bykov,
Simon Barke,
Nils Christopher Brause,
Juan José Esteban Delgado,
Thomas S. Schwarze,
Jens Reiche,
Karsten Danzmann,
Torben Rasmussen,
Torben Vendt Hansen,
Anders Engaard,
Søren Møller Pedersen,
Oliver Jennrich,
Martin Suess,
Zoran Sodnik,
Gerhard Heinzel
Abstract:
Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of $μ\textrm{rad}/\sqrt{\textrm{Hz}}$ at frequencies between…
▽ More
Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of $μ\textrm{rad}/\sqrt{\textrm{Hz}}$ at frequencies between $0.1\,\textrm{mHz}$ and $1\,\textrm{Hz}$. In this paper, we present phase readout systems, so-called phasemeters, that are able to achieve such precisions and we discuss various means that have been employed to reduce noise in the analogue circuit domain and during digitisation. We also discuss the influence of some non-linear noise sources in the analogue domain of such phasemeters. And finally, we present the performance that was achieved during testing of the elegant breadboard model of the LISA phasemeter, that was developed in the scope of an ESA technology development activity.
△ Less
Submitted 30 April, 2015;
originally announced April 2015.
-
The Gravitational Wave Observatory Designer: Sensitivity Limits of Spaceborne Detectors
Authors:
Simon Barke,
Yan Wang,
Juan Jose Esteban Delgado,
Michael Tröbs,
Gerhard Heinzel,
Karsten Danzmann
Abstract:
The most promising concept for low frequency gravitational wave observatories are laser interferometric detectors in space. It is usually assumed that the noise floor for such a detector is dominated by optical shot noise in the signal readout. For this to be true, a careful balance of mission parameters is crucial to keep all other parasitic disturbances below shot noise. We developed a web appli…
▽ More
The most promising concept for low frequency gravitational wave observatories are laser interferometric detectors in space. It is usually assumed that the noise floor for such a detector is dominated by optical shot noise in the signal readout. For this to be true, a careful balance of mission parameters is crucial to keep all other parasitic disturbances below shot noise. We developed a web application that uses over 30 input parameters and considers many important technical noise sources and noise suppression techniques. It optimizes free parameters automatically and generates a detailed report on all individual noise contributions. Thus you can easily explore the entire parameter space and design a realistic gravitational wave observatory.
In this document we describe the different parameters, present all underlying calculations, and compare the final observatory's sensitivity with astrophysical sources of gravitational waves. We use as an example parameters currently assumed to be likely applied to a space mission to be launched in 2034 by the European Space Agency. The web application itself is publicly available on the Internet at http://spacegravity.org/designer.
△ Less
Submitted 5 November, 2014;
originally announced November 2014.
-
Vanishing tilt-to-length coupling for a singular case in two-beam laser interferometers with Gaussian beams
Authors:
Sönke Schuster,
Gudrun Wanner,
Michael Tröbs,
Gerhard Heinzel
Abstract:
The omnipresent tilt-to-length coupling in two-beam laser interferometers, frequently a nuisance in precision measurements, vanishes for the singular case of two beams with identical parameters and complete detection of both beams without clip**. This effect has been observed numerically and is explained in this manuscript by the cancellation of two very different effects of equal magnitude and…
▽ More
The omnipresent tilt-to-length coupling in two-beam laser interferometers, frequently a nuisance in precision measurements, vanishes for the singular case of two beams with identical parameters and complete detection of both beams without clip**. This effect has been observed numerically and is explained in this manuscript by the cancellation of two very different effects of equal magnitude and opposite sign.
This paper was published in Applied Optics and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: [http://www.opticsinfobase.org/ao/abstract.cfm?URI=ao-54-5-1010]. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.
△ Less
Submitted 2 February, 2015; v1 submitted 20 June, 2014;
originally announced June 2014.
-
The Gravitational Universe
Authors:
The eLISA Consortium,
:,
P. Amaro Seoane,
S. Aoudia,
H. Audley,
G. Auger,
S. Babak,
J. Baker,
E. Barausse,
S. Barke,
M. Bassan,
V. Beckmann,
M. Benacquista,
P. L. Bender,
E. Berti,
P. Binétruy,
J. Bogenstahl,
C. Bonvin,
D. Bortoluzzi,
N. C. Brause,
J. Brossard,
S. Buchman,
I. Bykov,
J. Camp,
C. Caprini
, et al. (136 additional authors not shown)
Abstract:
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in th…
▽ More
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in the Universe, and much of its action is dark. Opening a gravitational window on the Universe will let us go further than any alternative. Gravity has its own messenger: Gravitational waves, ripples in the fabric of spacetime. They travel essentially undisturbed and let us peer deep into the formation of the first seed black holes, exploring redshifts as large as z ~ 20, prior to the epoch of cosmic re-ionisation. Exquisite and unprecedented measurements of black hole masses and spins will make it possible to trace the history of black holes across all stages of galaxy evolution, and at the same time constrain any deviation from the Kerr metric of General Relativity. eLISA will be the first ever mission to study the entire Universe with gravitational waves. eLISA is an all-sky monitor and will offer a wide view of a dynamic cosmos using gravitational waves as new and unique messengers to unveil The Gravitational Universe. It provides the closest ever view of the early processes at TeV energies, has guaranteed sources in the form of verification binaries in the Milky Way, and can probe the entire Universe, from its smallest scales around singularities and black holes, all the way to cosmological dimensions.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.