-
Light extraction from 2D materials using liquid formed micro-lenses
Authors:
Christopher S. Woodhead,
Jonathan Roberts,
Yasir J. Noori,
Yameng Cao,
Ramón Bernardo-Gavito,
Peter Tovee,
Aleksey Kozikov,
Konstantin Novoselov,
Robert J. Young
Abstract:
The recent discovery of semiconducting two-dimensional materials has led to the prediction of a revolution in the field of optoelectronics, driven by the introduction of a series of new components that are just a few atoms thick. Key remaining challenges for producing practical devices from these materials lie in improving the coupling of light into and out of single atomic layers, and in making t…
▽ More
The recent discovery of semiconducting two-dimensional materials has led to the prediction of a revolution in the field of optoelectronics, driven by the introduction of a series of new components that are just a few atoms thick. Key remaining challenges for producing practical devices from these materials lie in improving the coupling of light into and out of single atomic layers, and in making these layers robust to the influence of their surrounding environment. We present a solution to tackle both of these problems simultaneously, by deterministically placing a micro-lens directly onto the surface of these materials. These lenses are dynamically tuned to increase the coupling of light, whilst controlling chromatic aberration, before being set in place with UV light. We show that this approach enhances photoluminescence of tungsten diselenide (WSe2) monolayers by up to 300%, and nearly doubles the imaging resolution of the system. Furthermore, this solution fully encapsulates the monolayer, preventing it from physical damage and degradation in air. The optical solution we have developed could become a key enabling technology for the mass production of ultra-thin optical devices, such as quantum light emitting diodes.
△ Less
Submitted 18 July, 2016;
originally announced July 2016.
-
Photonic crystals to enhance light extraction from 2D materials
Authors:
Yasir J. Noori,
Yameng Cao,
Jonathan Roberts,
Christopher Woodhead,
Ramon Bernardo-Gavito,
Peter Tovee,
Robert J. Young
Abstract:
We propose a scheme for coupling 2D materials to an engineered cavity based on a defective rod type photonic crystal lattice. We show results from numerical modelling of the suggested cavity design, and propose using the height profile of a 2D material transferred on top of the cavity to maximise coupling between exciton recombination and the cavity mode. The photonic structure plays a key role in…
▽ More
We propose a scheme for coupling 2D materials to an engineered cavity based on a defective rod type photonic crystal lattice. We show results from numerical modelling of the suggested cavity design, and propose using the height profile of a 2D material transferred on top of the cavity to maximise coupling between exciton recombination and the cavity mode. The photonic structure plays a key role in enhancing the launch efficiency, by improving the directionality of the emitted light to better couple it into an external optical system. When using the photonic structure, we measured an increase in the extraction ratio by a factor of 3.4. We investigated the variations in the flux spectrum when the radius of the rods is modified, and when the 2D material droops to a range of different heights within the cavity. We found an optimum enhancement when the rods have a radius equal to 0.165 times the lattice constant, this enhancement reduces when the radius is reduced or increased. Finally, we discuss the possible use of solid immersion lenses, in combination with our photonic structure, to further enhance the launch efficiency and to improve vertical confinement of the cavity mode.
△ Less
Submitted 18 July, 2016;
originally announced July 2016.
-
Nanoscale Map** of Nanosecond Time-scale Electro-Mechanical Phenomena in Graphene NEMS
Authors:
Nicholas D. Kay,
Peter D. Tovee,
Benjamin J. Robinson,
Konstantin S. Novoselov,
Oleg V. Kolosov
Abstract:
Atomically thin layers of two-dimensional (2D) materials such as graphene, MoS2 and h-BN have immense potential as sensors and electronic devices thanks to their highly desirable electronic, mechanical, optical and heat transport properties. In particular their extreme stiffness, tensile strength and low density allows for high frequency electronic devices, resonators and ultra-sensitive detectors…
▽ More
Atomically thin layers of two-dimensional (2D) materials such as graphene, MoS2 and h-BN have immense potential as sensors and electronic devices thanks to their highly desirable electronic, mechanical, optical and heat transport properties. In particular their extreme stiffness, tensile strength and low density allows for high frequency electronic devices, resonators and ultra-sensitive detectors providing realistic avenues for down-scaling electronic devices and nanoelectromechanical systems (NEMS). Whilst nanoscale morphology and electronic properties of 2D materials can be studied using existing electron or scanning probe microscopy approaches, time-dependant phenomena on the ns and shorter time-scales cannot be readily explored. Here we use the heterodyne principle to reach into this ns time-scale and create a local nanoscale probe for electrostatically induced actuation of a graphene resonator, with amplitude sensitivity down to pm range and time sensitivity in the ns range. We experimentally observed response times of 20-120 ns for resonators with beam lengths of 180 nm to 2.5 um in line with the theoretical predictions for such NEMS devices.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
Time dynamics of photothermal vs optoacoustic response in mid IR nanoscale biospectroscopy
Authors:
Peter D. Tovee,
Claire Tinker-Mill,
Kevin Kjoller,
David Allsop,
Peter Weightman,
Mark Surman,
Michele R. F. Siggel-King,
Andy Wolski,
Oleg V. Kolosov
Abstract:
Infrared (IR) spectroscopy, a well established tool for chemical analysis of diverse materials, has significant potential in biomedical applications. While the spatial resolution of traditional IR spectroscopy is limited by the wavelength of the IR light to the few micrometres, it has been shown that nanoscale chemical analysis can be obtained by detecting IR induced local heating photothermal res…
▽ More
Infrared (IR) spectroscopy, a well established tool for chemical analysis of diverse materials, has significant potential in biomedical applications. While the spatial resolution of traditional IR spectroscopy is limited by the wavelength of the IR light to the few micrometres, it has been shown that nanoscale chemical analysis can be obtained by detecting IR induced local heating photothermal response via Scanning Thermal Microscopy (SThM) or local thermomechanical expansion using Atomic Force Microscopy (AFM). This paper explores the potential of a pulsed ps pulse duration high power free electron laser (FEL) light source for AFM-IR and SThM-IR spectroscopy employing standard AFM and SThM probes. The SThM-IR response was found to have a detrimental strong background signal due to the direct heating of the probe, whereas the AFM IR thermomechanical response allowed to eliminate such a problem for both top down and bottom up illuminations with the FEL IR source. The SThM IR characteristic response time was approximately half that of AFM-IR, in line with finite element analysis simulations. Finally, the advantages and drawbacks of AFM-IR wavelength sensitive spectroscopic response using a ps duration FEL vs a high repetition quantum cascade laser IR source in studies of nanoscale dimension amyloid peptide fibres were explored both experimentally and via finite elements analysis.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
Nanothermal Characterization of Amorphous and Crystalline Phases in Chalcogenide Thin Films with Scanning Thermal Microscopy
Authors:
J. L. Bosse,
M. Timofeeva,
P. D. Tovee,
B. J. Robinson,
B. D. Huey,
O. V. Kolosov
Abstract:
The thermal properties of amorphous and crystalline phases in chalcogenide phase change materials (PCM) play a key role in device performance for non-volatile random-access memory. Here, we report the nanothermal morphology of amorphous and crystalline phases in laser pulsed GeTe and Ge2Sb2Te5 thin films by scanning thermal microscopy (SThM). By performing SThM measurements and applying quantitati…
▽ More
The thermal properties of amorphous and crystalline phases in chalcogenide phase change materials (PCM) play a key role in device performance for non-volatile random-access memory. Here, we report the nanothermal morphology of amorphous and crystalline phases in laser pulsed GeTe and Ge2Sb2Te5 thin films by scanning thermal microscopy (SThM). By performing SThM measurements and applying quantitative physical models to two film thicknesses, the PCM thermal conductivities and thermal boundary conductances between the PCM and SThM probe are independently estimated for the amorphous and crystalline phase of each stoichiometry.
△ Less
Submitted 18 June, 2014;
originally announced June 2014.
-
Nanoscale resolution scanning thermal microscopy with thermally conductive nanowire probes
Authors:
Maria Timofeeva,
Alexey Bolshakov,
Peter D. Tovee,
Dagou A. Zeze,
Vladimir G. Dubrovskii,
Oleg V. Kolosov
Abstract:
Scanning thermal microscopy (SThM) - a type of scanning probe microscopy that allows map** thermal transport and temperatures in nanoscale devices, is becoming a key approach that may help to resolve heat dissipation problems in modern processors and develop new thermoelectric materials. Unfortunately, performance of current SThM implementations in measurement of high thermal conductivity materi…
▽ More
Scanning thermal microscopy (SThM) - a type of scanning probe microscopy that allows map** thermal transport and temperatures in nanoscale devices, is becoming a key approach that may help to resolve heat dissipation problems in modern processors and develop new thermoelectric materials. Unfortunately, performance of current SThM implementations in measurement of high thermal conductivity materials continues to me limited. The reason for these limitations is two-fold - first, SThM measurements of high thermal conductivity materials need adequate high thermal conductivity of the probe apex, and secondly, the quality of thermal contact between the probe and the sample becomes strongly affected by the nanoscale surface corrugations of the studied sample. In this paper we develop analytical models of the SThM approach that can tackle these complex problems - by exploring high thermal conductivity nanowires as a tip apex, and exploring contact resistance between the SThM probe and studied surface, the latter becoming particularly important when both tip and surface have high thermal conductivities. We develop analytical model supported by the finite element analysis simulations and by the experimental tests of SThM prototype using carbon nanotube (CNT) at the tip apex as a heat conducting nanowire. These results elucidate vital relationships between the performance of the probe in SThM from one side and thermal conductivity, geometry of the probe and its components from the other, providing pathway for overcoming current limitations of SThM.
△ Less
Submitted 8 September, 2013;
originally announced September 2013.
-
Ultra High Thermal Resolution Scanning Probe Microscopy via Carbon Nanotube Tipped Thermal Probes
Authors:
Peter D. Tovee,
Manuel E. Pumarol,
Mark C. Rosamond,
Robert Jones,
Michael C. Petty,
Dagou A. Zeze,
Oleg V. Kolosov
Abstract:
We present a new concept of scanning thermal nanoprobe that utilizes the extreme thermal conductance of a carbon nanotube (CNT) to channel heat between the probe and the sample. The integration of CNT in scanning thermal microscopy (SThM) overcomes the main drawbacks of standard SThM probes, where the low thermal conductance of the apex SThM probe is the main limiting factor. The integration of CN…
▽ More
We present a new concept of scanning thermal nanoprobe that utilizes the extreme thermal conductance of a carbon nanotube (CNT) to channel heat between the probe and the sample. The integration of CNT in scanning thermal microscopy (SThM) overcomes the main drawbacks of standard SThM probes, where the low thermal conductance of the apex SThM probe is the main limiting factor. The integration of CNT (CNT- SThM) extends SThM sensitivity to thermal transport measurement in higher thermal conductivity materials such as metals, semiconductors and ceramics, while also improving the spatial resolution. Investigation of thermal transport in ultra large scale integration (ULSI) interconnects, using CNT- SThM probe, showed fine details of heat transport in ceramic layer, vital for mitigating electromigration in ULSI metallic current leads. For a few layer graphene, the heat transport sensitivity and spatial resolution of the CNT-SThM probe demonstrated significantly superior thermal resolution compared to that of standard SThM probes achieving 20-30 nm topography and ~30 nm thermal spatial resolution compared to 50-100 nm for standard SThM probes. The outstanding axial thermal conductivity, high aspect ratio and robustness of CNTs can make CNT-SThM the perfect thermal probe for the measurement of nanoscale thermophysical properties and an excellent candidate for the next generation of thermal microscopes.
△ Less
Submitted 27 May, 2013;
originally announced May 2013.
-
Nanoscale resolution immersion scanning thermal microscopy
Authors:
Peter D. Tovee,
Oleg V. Kolosov
Abstract:
Nanoscale thermal properties are becoming of extreme importance for modern electronic circuits that dissipate increasing power on the length scale of few tens of nanometers, and for chemical and physical properties sensors and biosensors using nanoscale sized features. While Scanning Thermal Microscopy (SThM) is known for its ability to probe thermal properties and heat generation with nanoscale r…
▽ More
Nanoscale thermal properties are becoming of extreme importance for modern electronic circuits that dissipate increasing power on the length scale of few tens of nanometers, and for chemical and physical properties sensors and biosensors using nanoscale sized features. While Scanning Thermal Microscopy (SThM) is known for its ability to probe thermal properties and heat generation with nanoscale resolution, until today it was perceived impossible to use it in the liquid environment due to dominating direct heat exchange between microfabricated thermal probe and surrounding liquid that would deteriorate spatial resolution. Nonetheless, our theoretical analysis of SThM in liquids showed that for certain design of SThM probe with resistive heater located near the probe tip, their thermal signal is only moderately affected, by less than half on immersion in a dodecane environment. More significantly, its spatial resolution, surprisingly, would remain practically unaffected, and the thermal contact between the tip apex and the studied sample would be beneficially improved. Our experimental trials of such immersion SThM, or iSThM, were fully successful and here we report for the first time nanoscale SThM measurements of thermal conductivity of Ultra Large Scale Integration polymerceramic metal interconnects with the spatial thermal resolution down to 50 nm. Further studies of heat transport in nanoscale graphite flakes in iSThM suggested, in particular, that highly anisotropic thermal conductivity in graphene layers may play significant role in the nanoscale thermal transport in liquid environment. New iSThM opens a wide range of applications from noncontact measurements of thermal transport in semiconductor devices to exploring graphene energy storage, catalytic reactions and heat generation in biological systems.
△ Less
Submitted 6 June, 2013; v1 submitted 11 March, 2013;
originally announced March 2013.
-
Nanoscale spatial resolution probes for Scanning Thermal Microscopy of solid state materials
Authors:
P. Tovee,
M. Pumarol,
D. Zeze,
Kevin Kjoller,
O. Kolosov
Abstract:
Scanning Thermal Microscopy (SThM) uses micromachined thermal sensors integrated in a force sensing cantilever with a nanoscale tip can be highly useful for exploration of thermal management of nanoscale semiconductor devices. As well as map** of surface properties of related materials. Whereas SThM is capable to image externally generated heat with nanoscale resolution, its ability to map and m…
▽ More
Scanning Thermal Microscopy (SThM) uses micromachined thermal sensors integrated in a force sensing cantilever with a nanoscale tip can be highly useful for exploration of thermal management of nanoscale semiconductor devices. As well as map** of surface properties of related materials. Whereas SThM is capable to image externally generated heat with nanoscale resolution, its ability to map and measure thermal conductivity of materials has been mainly limited to polymers or similar materials possessing low thermal conductivity in the range from 0.1 to 1 W/mK, with lateral resolution on the order of 1 \mum. In this paper we use linked experimental and theoretical approaches to analyse thermal performance and sensitivity of the micromachined SThM probes in order to expand their applicability to a broader range of nanostructures from polymers to semiconductors and metals. We develop physical models of interlinked thermal and electrical phenomena in these probes and then validate these models using experimental measurements of the real probes, which provided the basis for analysing SThM performance in exploration of nanostructures. Our study then highlights critical features of these probes, namely, the geometrical location of the thermal sensor with respect to the probe apex, thermal conductance of the probe to the support base, heat conduction to the surrounding gas, and the thermal conductivity of tip material adjacent to the apex. It is furthermore allows us to propose a novel design of the SThM probe that incorporates a carbon nanotube (CNT) or similar high thermal conductivity graphene sheet material positioned near the probe apex. The new sensor is predicted to provide spatial resolution to the thermal properties of nanostructures on the order of few tens of nm, as well as to expand the sensitivity of the SThM probe to materials with heat conductivity values up to 100-1000 W/mK.
△ Less
Submitted 6 September, 2012; v1 submitted 27 October, 2011;
originally announced October 2011.