Showing 1–21 of 21 results for author: Tourret, D

Emergence of rapid solidification microstructure in additive manufacturing of a Magnesium alloy

Authors: D. Tourret, R. Tavakoli, A. D. Boccardo, A. K. Boukellal, M. Li, J. Molina-Aldareguia

Abstract: Bioresorbable Mg-based alloys with low density, low elastic modulus, and excellent biocompatibility are outstanding candidates for temporary orthopedic implants. Coincidentally, metal additive manufacturing (AM) is disrupting the biomedical sector by providing fast access to patient-customized implants. Due to the high cooling rates associated with fusion-based AM techniques, they are often descri… ▽ More Bioresorbable Mg-based alloys with low density, low elastic modulus, and excellent biocompatibility are outstanding candidates for temporary orthopedic implants. Coincidentally, metal additive manufacturing (AM) is disrupting the biomedical sector by providing fast access to patient-customized implants. Due to the high cooling rates associated with fusion-based AM techniques, they are often described as rapid solidification processes. However, conclusive observations or rapid solidification in metal AM -- attested by drastic microstructural changes induced by solute trap**, kinetic undercooling, or morphological transitions of the solid-liquid interface -- are scarce. Here we study the formation of banded microstructures during laser powder-bed fusion (LPBF) of a biomedical-grade Magnesium-rare earth alloy, combining advanced characterization and state-of-the-art thermal and phase-field modeling. Our experiments unambiguously identify microstructures as the result of an oscillatory banding instability known from other rapid solidification processes. Our simulations confirm that LPBF-relevant solidification conditions strongly promote the development of banded microstructures in a Mg-Nd alloy. Simulations also allow us to peer into the sub-micrometer nanosecond-scale details of the solid-liquid interface evolution giving rise to the distinctive banded patterns. Since rapidly solidified Mg alloys may exhibit significantly different mechanical and corrosion response compared to their cast counterparts, the ability to predict the emergence of rapid solidification microstructures (and to correlate them with local solidification conditions) may open new pathways for the design of bioresorbable orthopedic implants, not only fitted geometrically to each patient, but also optimized with locally-tuned mechanical and corrosion properties. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: in-situ characterisation and phase-field modelling

Authors: A. D. Boccardo, Z. Zou, M. Simonelli, M. Tong, J. Segurado, S. B. Leen, D. Tourret

Abstract: Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $α'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $α'$ phase decomposes into equilibrium $α+β$ structures, while possibly conserving microstructural features and length scales of the $α'$ lath structure.… ▽ More Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $α'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $α'$ phase decomposes into equilibrium $α+β$ structures, while possibly conserving microstructural features and length scales of the $α'$ lath structure. Here, we combine experimental and computational methods to explore the kinetics of martensite decomposition. Experiments rely on in-situ characterisation (electron microscopy and diffraction) during multi-step heat treatment from 400$^{\circ}$C up to the alloy $β$-transus temperature (995$^{\circ}$C). Computational simulations rely on an experimentally-informed computationally-efficient phase-field model. Experiments confirmed that as-built microstructures were fully composed of martensitic $α'$ laths. During martensite decomposition, nucleation of the $β$ phase occurs primarily along $α'$ lath boundaries, with traces of $β$ nucleation along crystalline defects. Phase-field results, using electron backscatter diffraction maps of as-built microstructures as initial conditions, are compared directly with in-situ characterisation data. Experiments and simulations confirmed that, while full decomposition into stable $α+β$ phases may be complete at 650$^{\circ}$C provided sufficient annealing time, visible morphological evolution of the microstructure was only observed for $T\geq\,$700$^{\circ}$C, without modification of the prior-$β$ grain structure. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Grain growth competition and formation of grain boundaries during solidification of hcp alloys

Authors: A. K. Boukellal, M. Sarebanzadeh, A. Orozco-Caballero, F. Sket, J. LLorca, D. Tourret

Abstract: Grain growth competition during directional solidification of a polycrystal with hexagonal (hcp) symmetry (Mg-1wt%Gd alloy) is studied by phase-field modeling, exploring the effect of the temperature gradient G on the resulting grain boundary (GB) orientation selection. Results show that selection mechanisms and scaling laws derived for cubic (fcc, bcc) crystals also apply to hcp materials (within… ▽ More Grain growth competition during directional solidification of a polycrystal with hexagonal (hcp) symmetry (Mg-1wt%Gd alloy) is studied by phase-field modeling, exploring the effect of the temperature gradient G on the resulting grain boundary (GB) orientation selection. Results show that selection mechanisms and scaling laws derived for cubic (fcc, bcc) crystals also apply to hcp materials (within their basal plane), provided a re-estimation of fitting parameters and re-scaling to account for the sixfold symmetry. While grain growth competition remains stochastic with rare events of unexpected elimination or side-branching along the develo** GBs, we also confirm an overall transition from a geometrical limit to a favorably oriented grain limit behavior with an increase of thermal gradient within the dendritic regime, and the progressive alignment of dendrites and GBs toward the temperature gradient direction with an increase of G during the dendritic-to-cellular morphological transition. Comparisons with original thin-sample directional solidification experiments show a qualitative agreement with PF results, yet with notable discrepancies, which nonetheless can be explained based on the stochastic variability of selected GB orientations, and the statistically limited experimental sample size. Overall, our results extend the understanding of GB formation and grain growth competition during solidification of hcp materials, and the effect of thermal conditions, nonetheless concluding on the challenges of extending the current studies to three dimensions, and the need for much broader (statistically significant) data sets of GB orientation selected under well-identified solidification conditions. △ Less

Submitted 14 March, 2024; v1 submitted 12 March, 2024; originally announced March 2024.

Using multicomponent recycled electronic waste alloys to produce high entropy alloys

Authors: Jose M. Torralba, Diego Iriarte, Damien Tourret, Alberto Meza

Abstract: The amount of electronic waste (e-waste) recycled worldwide is less than 20% of the total amount produced. In a world where the need for critical and strategic metals is increasing almost exponentially, it is unacceptable that tons of these elements remain unrecycled. One of the causes of this low level of recycling is that recycling is based on an expensive and complex selective sorting of metals… ▽ More The amount of electronic waste (e-waste) recycled worldwide is less than 20% of the total amount produced. In a world where the need for critical and strategic metals is increasing almost exponentially, it is unacceptable that tons of these elements remain unrecycled. One of the causes of this low level of recycling is that recycling is based on an expensive and complex selective sorting of metals. Extracting all metals simultaneously is much simpler and if this were done, it would significantly increase the recycling rate. Meanwhile, it was demonstrated that high entropy alloys (HEAs), which are in great demand in applications where very high performance is required, can be made from mixtures of complex alloys, hence reducing their dependence on pure critical metals. Here, we show that it is possible to obtain competitive HEAs from complex alloy mixtures corresponding to typical electronic waste compositions, combining two needs of high interest in our society, namely: to increase the level of recycling of electronic waste and the possibility of develo** high-performance HEAs without the need of using critical and/or strategic metals. To validate our hypothesis that e-waste can be used to produce competitive HEAs, we propose an alloy design strategy combining computational thermodynamics (CalPhaD) exploration of phase diagrams and phenomenological criteria for HEA design based on thermodynamic and structural parameters. A shortlist of selected compositions are then fabricated by arc melting ensuring compositional homogeneity of such complex alloys and, finally, characterised microstructurally, using electron microscopy and diffraction analysis, and mechanically, using hardness testing. △ Less

Submitted 17 November, 2023; originally announced November 2023.

Exploring the Impact of Configurational Entropy on the Design and Development of CoNi-Based Superalloys for Sustainable Applications

Authors: Ahad Mohammadzadeha, Akbar Heidarzadeh, Hailey Becker, Jorge Valilla Robles, Alberto Meza, Manuel Avella, Miguel A. Monclus, Damien Tourret, Jose Manuel Torralba

Abstract: A comprehensive literature review on recently rediscovered Co- and/or CoNi-based superalloys, strengthened by the γ' phase, revealed a relationship between the configurational entropy of the system and the γ' solvus temperature. This study was conducted on a high Cr CoNi-based superalloy system with high configurational entropy to test our hypothesis based on the sustainable metallurgy framework.… ▽ More A comprehensive literature review on recently rediscovered Co- and/or CoNi-based superalloys, strengthened by the γ' phase, revealed a relationship between the configurational entropy of the system and the γ' solvus temperature. This study was conducted on a high Cr CoNi-based superalloy system with high configurational entropy to test our hypothesis based on the sustainable metallurgy framework. Thermodynamic calculations were performed to design the chemical compositions, followed by vacuum casting and heat treatments to produce the desired alloys. The microstructures were characterized using a scanning electron microscope, electron backscattered diffraction, transmission electron microscope, and differential thermal analysis. Microhardness and nanoindentation tests were employed to measure the mechanical properties. The results showed that both the configurational entropy and the type of alloying elements determine the final high-temperature performance of the alloys. We found that to enhance the higher γ' solvus temperature, the configurational entropy should be increased by adding γ' stabilizing elements. The microstructural and mechanical characteristics of the designed alloys before and after heat treatments are discussed in detail. The outcome of this study is beneficial for develo** cobalt-based high-entropy superalloys with appropriate processing windows and freezing ranges for advanced sustainable manufacturing purposes, such as using powder bed fusion technologies. △ Less

Submitted 15 July, 2023; originally announced July 2023.

Efficiency and accuracy of GPU-parallelized Fourier spectral methods for solving phase-field models

Authors: A. D. Boccardo, M. Tong, S. B. Leen, D. Tourret, J. Segurado

Abstract: Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be solved by a broad range of numerical methods, but this often results in a high computational cost, which calls for advanced numerical methods to accelerate their resolution. Here,… ▽ More Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be solved by a broad range of numerical methods, but this often results in a high computational cost, which calls for advanced numerical methods to accelerate their resolution. Here, we quantitatively test the efficiency and accuracy of semi-implicit Fourier spectral-based methods, implemented in Python programming language and parallelized on a graphics processing unit (GPU), for solving a phase-field model coupling Cahn-Hilliard and Allen-Cahn equations. We compare computational performance and accuracy with a standard explicit finite difference (FD) implementation with similar GPU parallelization on the same hardware. For a similar spatial discretization, the semi-implicit Fourier spectral (FS) solvers outperform the FD resolution as soon as the time step can be taken 5 to 6 times higher than afforded for the stability of the FD scheme. The accuracy of the FS methods also remains excellent even for coarse grids, while that of FD deteriorates significantly. Therefore, for an equivalent level of accuracy, semi-implicit FS methods severely outperform explicit FD, by up to 4 orders of magnitude, as they allow much coarser spatial and temporal discretization. △ Less

Submitted 14 June, 2023; v1 submitted 7 June, 2023; originally announced June 2023.

Journal ref: Computational Materials Science 228 (2023) 112313

Morphological stability of solid-liquid interfaces under additive manufacturing conditions

Authors: D. Tourret, J. Klemm-Toole, A. Eres Castellanos, B. Rodgers, G. Becker, A. Saville, B. Ellyson, C. Johnson, B. Milligan, J. Copley, R. Ochoa, A. Polonsky, K. Pusch, M. P. Haines, K. Fezzaa, T. Sun, K. Clarke, S. Babu, T. Pollock, A. Karma, A. Clarke

Abstract: Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic studies under AM conditions with microstructural outcomes compared to solidification theory remain lacking. Here we measure solid-liquid interface velocities of Ni… ▽ More Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic studies under AM conditions with microstructural outcomes compared to solidification theory remain lacking. Here we measure solid-liquid interface velocities of Ni-Mo-Al alloy single crystals under AM conditions with synchrotron X-ray imaging, characterize the microstructures, and show discrepancies with classical theories regarding the onset velocity for absolute stability of a planar solid-liquid interface. Experimental observations reveal cellular/dendritic microstructures can persist at velocities larger than the expected absolute stability limit, where banded structure formation should theoretically appear. We show that theory and experimental observations can be reconciled by properly accounting for the effect of solute trap** and kinetic undercooling on the velocity-dependent solidus and liquidus temperatures of the alloy. Further theoretical developments and accurate assessments of key thermophysical parameters - like liquid diffusivities, solid-liquid interface excess free energies, and kinetic coefficients - remain needed to quantitatively investigate such discrepancies and pave the way for the prediction and control of microstructure selection under rapid solidification conditions. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Journal ref: Acta Materialia 250 (2023) 118858

Phase-Field Study of Polycrystalline Growth and Texture Selection During Melt Pool Solidification

Authors: Rouhollah Tavakoli, Damien Tourret

Abstract: Grain growth competition during solidification determines microstructural features, such as dendritic arm spacings, segregation pattern, and grain texture, which have a key impact on the final mechanical properties. During metal additive manufacturing (AM), these features are highly sensitive to manufacturing conditions, such as laser power and scanning speed. The melt pool (MP) geometry is also e… ▽ More Grain growth competition during solidification determines microstructural features, such as dendritic arm spacings, segregation pattern, and grain texture, which have a key impact on the final mechanical properties. During metal additive manufacturing (AM), these features are highly sensitive to manufacturing conditions, such as laser power and scanning speed. The melt pool (MP) geometry is also expected to have a strong influence on microstructure selection. Here, taking advantage of a computationally efficient multi-GPU implementation of a quantitative phase-field model, we use two-dimensional cross-section simulations of a shrinking MP during metal AM, at the scale of the full MP, in order to explore the resulting mechanisms of grain growth competition and texture selection. We explore MPs of different aspect ratios, different initial (substrate) grain densities, and repeat each simulation several times with different random grain distributions and orientations along the fusion line in order to obtain a statistically relevant picture of grain texture selection mechanisms. Our results show a transition from a weak to a strong $\langle10\rangle$ texture when the aspect ratio of the melt pool deviates from unity. This is attributed to the shape and directions of thermal gradients during solidification, and seems more pronounced in the case of wide melt pools than in the case of a deeper one. The texture transition was not found to notably depend upon the initial grain density along the fusion line from which the melt pool solidifies epitaxially. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Journal ref: IOP Conference Series: Materials Science and Engineering 1281 (2023) 012011

On the occurrence of buoyancy-induced oscillatory growth instability in directional solidification of alloys

Authors: Josep Maria Barbera, Thomas Isensee, Damien Tourret

Abstract: Recent solidification experiments identified an oscillatory growth instability during directional solidification of Ni-based superalloy CMSX4 under a given range of cooling rates. From a modeling perspective, the quantitative simulation of dendritic growth under convective conditions remains challenging, due to the multiple length scales involved. Using the dendritic needle network (DNN) model, co… ▽ More Recent solidification experiments identified an oscillatory growth instability during directional solidification of Ni-based superalloy CMSX4 under a given range of cooling rates. From a modeling perspective, the quantitative simulation of dendritic growth under convective conditions remains challenging, due to the multiple length scales involved. Using the dendritic needle network (DNN) model, coupled with an efficient Navier-Stokes solver, we reproduced the buoyancy-induced growth oscillations observed in CMSX4 directional solidification. These previous results have shown that, for a given alloy and temperature gradient, oscillations occur in a narrow range of cooling rates (or pulling velocity, $V_p$) and that the selected primary dendrite arm spacing ($Λ$) plays a crucial role in the activation of the flow leading to oscillations. Here, we show that the oscillatory behavior may be generalized to other binary alloys within an appropriate range of $(V_p,Λ)$ by reproducing it for an Al-4at.%Cu alloy. We perform a map** of oscillatory states as a function of $V_p$ and $Λ$, and identify the regions of occurrence of different behaviors (e.g., sustained or damped oscillations) and their effect on the oscillation characteristics. Our results suggest a minimum of $V_p$ for the occurrence of oscillations and confirm the correlation between the oscillation type (namely: damped, sustained, or noisy) with the ratio of average fluid velocity $\overline V$ over $V_p$. We describe the different observed growth regimes and highlight similarities and contrasts with our previous results for a CMSX4 alloy. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Journal ref: IOP Conference Series: Materials Science and Engineering 1281 (2023) 012050

Ultrafast synthesis of SiC nanowire webs by floating catalysts rationalised through in-situ measurements and thermodynamic calculations

Authors: Isabel Gómez-Palos, Miguel Vazquez-Pufleau, Jorge Valilla, Álvaro Ridruejo, Damien Tourret, Juan J. Vilatela

Abstract: This work presents the synthesis of SiC nanowires floating in a gas stream through the vapour-liquid-solid (VLS) mechanism using an aerosol of catalyst nanoparticles. These conditions lead to ultrafast growth at 8.5 μm/s (maximum of 50 μm/s), which is up to 3 orders of magnitude above conventional substrate-based chemical vapour deposition. The high aspect ratio of the nanowires (up to 2200) favou… ▽ More This work presents the synthesis of SiC nanowires floating in a gas stream through the vapour-liquid-solid (VLS) mechanism using an aerosol of catalyst nanoparticles. These conditions lead to ultrafast growth at 8.5 μm/s (maximum of 50 μm/s), which is up to 3 orders of magnitude above conventional substrate-based chemical vapour deposition. The high aspect ratio of the nanowires (up to 2200) favours their entanglement and the formation of freestanding network materials consisting entirely of SiCNWs. The floating catalyst chemical vapour deposition growth process is rationalised through in-situ sampling of reaction products and catalyst aerosol from the gas phase, and thermodynamic calculations of the bulk ternary Si-C-Fe phase diagram. The phase diagram suggests a description of the mechanistic path for the selective growth of SiCNWs, consistent with the observation that no other types of nanowires (Si or C) are grown by the catalyst. SiCNW growth occurs at 1130 °C, close to the calculated eutectic. According to the calculated phase diagram, upon addition of Si and C, the Fe-rich liquid segregates a carbon shell, and later enrichment of the liquid in Si leads to the formation of SiC. The exceptionally fast growth rate relative to substrate-based processes is attributed to the increased availability of precursors for incorporation into the catalyst due to the high collision rate inherent to this new synthesis mode. △ Less

Submitted 6 December, 2022; originally announced December 2022.

Comments: 23 pages, 19 Figures, main manuscript and supporting information

Cell Invasion during Competitive Growth of Polycrystalline Solidification Patterns

Authors: Younggil Song, Fatima L. Mota, Damien Tourret, Kaihua Ji, Bernard Billia, Rohit Trivedi, Nathalie Bergeon, Alain Karma

Abstract: Spatially extended cellular and dendritic array structures forming during solidification processes such as casting, welding, or additive manufacturing are generally polycrystalline. Both the array structure within each grain and the larger scale grain structure determine the performance of many structural alloys. How those two structures coevolve during solidification remains poorly understood. By… ▽ More Spatially extended cellular and dendritic array structures forming during solidification processes such as casting, welding, or additive manufacturing are generally polycrystalline. Both the array structure within each grain and the larger scale grain structure determine the performance of many structural alloys. How those two structures coevolve during solidification remains poorly understood. By in situ observations of microgravity alloy solidification experiments onboard the International Space Station, we have discovered that individual cells from one grain can unexpectedly invade a nearby grain of different misorientation, either as a solitary cell or as rows of cells. This invasion process causes grains to interpenetrate each other and hence grain boundaries to adopt highly convoluted shapes. Those observations are reproduced by phase-field simulations further demonstrating that invasion occurs for a wide range of misorientations. Those results fundamentally change the traditional conceptualization of grains as distinct regions embedded in three-dimensional space. △ Less

Submitted 17 March, 2023; v1 submitted 15 November, 2022; originally announced November 2022.

Comments: 4 figures, 28 pages (single column), Nature Communications

Scaling laws for two-dimensional dendritic crystal growth in a narrow channel

Authors: Younggil Song, Damien Tourret, Alain Karma

Abstract: We investigate analytically and computationally the dynamics of 2D needle crystal growth from the melt in a narrow channel. Our analytical theory predicts that, in the low supersaturation limit, the growth velocity $V$ decreases in time $t$ as a power law $V \sim t^{-2/3}$, which we validate by phase-field and dendritic-needle-network simulations. Simulations further reveal that, above a critical… ▽ More We investigate analytically and computationally the dynamics of 2D needle crystal growth from the melt in a narrow channel. Our analytical theory predicts that, in the low supersaturation limit, the growth velocity $V$ decreases in time $t$ as a power law $V \sim t^{-2/3}$, which we validate by phase-field and dendritic-needle-network simulations. Simulations further reveal that, above a critical channel width $Λ\approx 5l_D$, where $l_D$ the diffusion length, needle crystals grow with a constant $V<V_s$, where $V_s$ is the free-growth needle crystal velocity, and approaches $V_s$ in the limit $Λ\gg l_D$. △ Less

Submitted 23 April, 2023; v1 submitted 15 November, 2022; originally announced November 2022.

Comments: 6 pages, 4 figures, one supplementary material document with 1 figure

Grain growth competition during melt pool solidification -- Comparing phase-field and cellular automaton models

Authors: S. M. Elahi, R. Tavakoli, I. Romero, D. Tourret

Abstract: A broad range of computational models have been proposed to predict microstructure development during solidification processing but they have seldom been compared to each other on a quantitative and systematic basis. In this paper, we compare phase-field (PF) and cellular automaton (CA) simulations of polycrystalline growth in a two-dimensional melt pool under conditions relevant to additive manuf… ▽ More A broad range of computational models have been proposed to predict microstructure development during solidification processing but they have seldom been compared to each other on a quantitative and systematic basis. In this paper, we compare phase-field (PF) and cellular automaton (CA) simulations of polycrystalline growth in a two-dimensional melt pool under conditions relevant to additive manufacturing (powder-bed fusion). We compare the resulting grain structures using local (point-by-point) measurements, as well as averaged grain orientation distributions over several simulations. We explore the effect of the CA spatial discretization level and that of the melt pool aspect ratio upon the selected grain texture. Our simulations show that detailed microscopic features related to transient growth conditions and solid-liquid interface stability (e.g. the initial planar growth stage prior to its cellular/dendritic destabilization, or the early elimination of unfavorably oriented grains due to neighbor grain sidebranching) can only be captured by PF simulations. The resulting disagreement between PF and CA predictions can only be addressed partially by a refinement of the CA grid. However, overall grain distributions averaged over the entire melt pools of several simulations seem to lead to a notably better agreement between PF and CA, with some variability with the melt pool shape and CA grid. While further research remains required, in particular to identify the appropriate selection of CA spatial discretization and its link to characteristic microstructural length scales, this research provides a useful step forward in this direction by comparing both methods quantitatively at process-relevant length and time scales. △ Less

Submitted 30 October, 2022; originally announced October 2022.

Journal ref: Computational Materials Science 216 (2023) 111882

On the Effect of Nucleation Undercooling on Phase Transformation Kinetics

Authors: José Mancias, Vahid Attari, Raymundo Arróyave, Damien Tourret

Abstract: We carry out an extensive comparison between Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory of first-order phase transformation kinetics and phase-field (PF) results of a benchmark problem on nucleation. To address the stochasticity of the problem, several hundreds of simulations are performed to establish a comprehensive, statistically-significant analysis of the coincidences and discrepancies betw… ▽ More We carry out an extensive comparison between Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory of first-order phase transformation kinetics and phase-field (PF) results of a benchmark problem on nucleation. To address the stochasticity of the problem, several hundreds of simulations are performed to establish a comprehensive, statistically-significant analysis of the coincidences and discrepancies between PF and JMAK transformation kinetics. We find that PF predictions are in excellent agreement with both classical nucleation theory and JMAK theory, as long as the original assumptions of the latter are appropriately reproduced - in particular, the constant nucleation and growth rates in an infinite domain. When deviating from these assumptions, PF results are at odds with JMAK theory. In particular, we observe that the size of the initial particle radius $r_0$ relative to the critical nucleation radius $r^*$ has a significant effect on the rate of transformation. While PF and JMAK agree when $r_0$ is sufficiently higher than $r^*$, the duration of initial transient growth stage of a particle, before it reaches a steady growth velocity, increases as $r_0/r^*\to 1$. This incubation time has a significant effect on the overall kinetics, e.g. on the Avrami exponent of the multi-particle simulations. In contrast, for the considered conditions and parameters, the effect of interface curvature upon transformation kinetics - in particular negative curvature regions appearing during particle im**ement, present in PF but absent in JMAK theory - appears to be minor compared to that of $r_0/r^*$. We argue that rigorous benchmarking of phase-field models of stochastic processes (e.g. nucleation) need sufficient statistical data in order to make rigorous comparisons against ground truth theories. In these problems, analysis of probability distributions is clearly preferable to a deterministic approach. △ Less

Submitted 30 October, 2022; originally announced October 2022.

Journal ref: Integrating Materials and Manufacturing Innovation 11 (2022) 628-636

Convective effects on columnar dendritic solidification -- A multiscale dendritic needle network study

Authors: Thomas Isensee, Damien Tourret

Abstract: Gravity-induced buoyancy, inevitable in most solidification processes, substantially alters the dynamics of crystal growth, such that incorporating fluid flow in solidification models is crucial to understand and predict key aspects of microstructure selection. Here, we present a multi-scale Dendritic Needle Network (DNN) model for directional solidification that includes buoyant flow in the liqui… ▽ More Gravity-induced buoyancy, inevitable in most solidification processes, substantially alters the dynamics of crystal growth, such that incorporating fluid flow in solidification models is crucial to understand and predict key aspects of microstructure selection. Here, we present a multi-scale Dendritic Needle Network (DNN) model for directional solidification that includes buoyant flow in the liquid, and apply it to a range of alloys and growth conditions. After a brief presentation of the model, we study the selection of stable primary dendrite arm spacings in Al-4at.%Cu and in Ti-45at.%Al alloys under different gravity levels, comparing both applications to published phase-field results and experimental measurements. Then, we simulate the oscillatory growth behavior recently reported via X-ray in situ imaging of directional solidification of nickel-based superalloy CMSX-4. In this last application, the DNN simulations manage to reproduce the oscillatory growth behavior, and hence permit identifying the fundamental mechanisms behind the oscillatory growth regime. In particular, we show that sustained oscillations occur when the average liquid flow velocity is close to the crystal growth velocity, and that primary dendritic spacings also play a crucial role in the oscillatory behavior. △ Less

Submitted 8 August, 2022; v1 submitted 16 May, 2022; originally announced May 2022.

Journal ref: Acta Materialia 234 (2022) 118035

Multiscale simulation of powder-bed fusion processing of metallic alloys

Authors: S. M. Elahi, R. Tavakoli, A. K. Boukellal, T. Isensee, I. Romero, D. Tourret

Abstract: We present a computational framework for the simulations of powder-bed fusion of metallic alloys, which combines: (1) CalPhaD calculations of temperature-dependent alloy properties and phase diagrams, (2) macroscale finite element (FE) thermal simulations of the material addition and fusion, and (3) microscopic phase-field (PF) simulations of solidification in the melt pool. The methodology is app… ▽ More We present a computational framework for the simulations of powder-bed fusion of metallic alloys, which combines: (1) CalPhaD calculations of temperature-dependent alloy properties and phase diagrams, (2) macroscale finite element (FE) thermal simulations of the material addition and fusion, and (3) microscopic phase-field (PF) simulations of solidification in the melt pool. The methodology is applied to simulate the selective laser melting (SLM) of an Inconel 718 alloy using realistic processing parameters. We discuss the effect of temperature-dependent properties and the importance of accounting for different properties between the powder bed and the dense material in the macroscale thermal simulations. Using a two-dimensional longitudinal slice of the thermal field calculated via FE simulations, we perform an appropriately-converged PF solidification simulation at the scale of the entire melt pool, resulting in a calculation with over one billion grid points, yet performed on a single cluster node with eight graphics processing units (GPUs). These microscale simulations provide new insight into the grain texture selection via polycrystalline growth competition under realistic SLM conditions, with a level of detail down to individual dendrites. △ Less

Submitted 19 March, 2022; originally announced March 2022.

Journal ref: Computational Materials Science 209 (2022) 111383

Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges

Authors: D. Tourret, H. Liu, J. LLorca

Abstract: We briefly review the state-of-the-art in phase-field modeling of microstructure evolution. The focus is placed on recent applications of phase-field simulations of solid-state microstructure evolution and solidification that have been compared and/or validated with experiments. They show the potential of phase-field modeling to make quantitative predictions of the link between processing and micr… ▽ More We briefly review the state-of-the-art in phase-field modeling of microstructure evolution. The focus is placed on recent applications of phase-field simulations of solid-state microstructure evolution and solidification that have been compared and/or validated with experiments. They show the potential of phase-field modeling to make quantitative predictions of the link between processing and microstructure. Finally, some current challenges in extending the application of phase-field models within the context of integrated computational materials engineering are mentioned. △ Less

Submitted 20 April, 2021; originally announced April 2021.

Journal ref: Progress in Materials Science, 123, 100810, 2022

Multiscale prediction of microstructure length scales in metallic alloy casting

Authors: B. Bellón, A. K. Boukellal, T. Isensee, O. M. Wellborn, K. P. Trumble, M. J. M. Krane, M. S. Titus, D. Tourret, J. LLorca

Abstract: In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, a… ▽ More In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, and they were compared to spacing stability ranges and average spacings in dendritic arrays simulated using phase-field (PF) and dendritic needle network (DNN) models. It is first shown that PF and DNN lead to similar results for the Al-1\,wt\%Cu alloy, using a dendrite tip selection constant calculated with PF in the DNN simulations. PF simulations cannot achieve quantitative predictions for the Al-4\,wt\%Cu alloy because they are too computationally demanding due to the large separation of scale between tip radius and diffusion length, a characteristic feature of non-dilute alloys. Nevertheless, the results of DNN simulations for non-dilute Al-Cu alloys are in overall good agreement with our experimental results as well as with those of an extensive literature review. Simulations consistently suggest a widening of the PDAS stability range with a decrease of the temperature gradient as the microstructure goes from cellular-dendrites to well-developed hierarchical dendrites. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Comparing mesoscopic models for dendritic growth

Authors: Damien Tourret, Laszlo Sturz, Alexandre Viardin, Miha Založnik

Abstract: We present a quantitative benchmark of multiscale models for dendritic growth simulations. We focus on approaches based on phase-field, dendritic needle network, and grain envelope dynamics. As a first step, we focus on isothermal growth of an equiaxed grain in a supersaturated liquid in three dimensions. A quantitative phase-field formulation for solidification of a dilute binary alloy is used as… ▽ More We present a quantitative benchmark of multiscale models for dendritic growth simulations. We focus on approaches based on phase-field, dendritic needle network, and grain envelope dynamics. As a first step, we focus on isothermal growth of an equiaxed grain in a supersaturated liquid in three dimensions. A quantitative phase-field formulation for solidification of a dilute binary alloy is used as the reference benchmark. We study the effect of numerical and modeling parameters in both needle-based and envelope-based approaches, in terms of their capacity to quantitatively reproduce phase-field reference results. In light of this benchmark, we discuss the capabilities and limitations of each approach in quantitatively and efficiently predicting transient and steady states of dendritic growth. We identify parameters that yield a good compromise between accuracy and computational efficiency in both needle-based and envelope-based models. We expect that these results will guide further developments and utilization of these models, and ultimately pave the way to a quantitative bridging of the dendrite tip scale with that of entire experiments and solidification processes. △ Less

Submitted 17 June, 2020; v1 submitted 11 March, 2020; originally announced March 2020.

Journal ref: IOP Conference Series: Materials Science and Engineering 861 (2020) 012002

Three-dimensional needle network model for dendritic growth with fluid flow

Authors: Thomas Isensee, Damien Tourret

Abstract: We present a first implementation of the Dendritic Needle Network (DNN) model for dendritic crystal growth in three dimensions including convective transport in the melt. The numerical solving of the Navier-Stokes equations is performed with finite differences and is validated by comparison with a classical benchmark in fluid mechanics for unsteady flow. We compute the growth behavior of a single… ▽ More We present a first implementation of the Dendritic Needle Network (DNN) model for dendritic crystal growth in three dimensions including convective transport in the melt. The numerical solving of the Navier-Stokes equations is performed with finite differences and is validated by comparison with a classical benchmark in fluid mechanics for unsteady flow. We compute the growth behavior of a single equiaxed crystal under a forced convective flow. As expected, the resulting dendrite morphology differs strongly from the case of the purely diffusive regime and from similar two-dimensional simulations. The resulting computationally efficient simulations open the way to studying mechanisms of microstructure selection in presence of fluid flow, using realistic alloys and process parameters. △ Less

Submitted 17 June, 2020; v1 submitted 11 March, 2020; originally announced March 2020.

Journal ref: IOP Conference Series: Materials Science and Engineering 861 (2020) 012049

Multiscale dendritic needle network model of alloy solidification with fluid flow

Authors: D. Tourret, M. M. Francois, A. J. Clarke

Abstract: We present a mathematical formulation of a multiscale model for solidification with convective flow in the liquid phase. The model is an extension of the dendritic needle network approach for crystal growth in a binary alloy. We propose a simple numerical implementation based on finite differences and step-wise approximations of parabolic dendritic branches of arbitrary orientation. Results of the… ▽ More We present a mathematical formulation of a multiscale model for solidification with convective flow in the liquid phase. The model is an extension of the dendritic needle network approach for crystal growth in a binary alloy. We propose a simple numerical implementation based on finite differences and step-wise approximations of parabolic dendritic branches of arbitrary orientation. Results of the two-dimensional model are verified against reference benchmark solutions for steady, unsteady, and buoyant flow, as well as steady-state dendritic growth in the diffusive regime. Simulations of equiaxed growth under forced flow yield dendrite tip velocities within 10% of quantitative phase-field results from the literature. Finally, we perform illustrative simulations of polycrystalline solidification using physical parameters for an aluminum-10wt%copper alloy. Resulting microstructures show notable differences when taking into account natural buoyancy in comparison to a purely diffusive transport regime. The resulting model opens new avenues for computationally and quantitatively investigating the influence of fluid flow and gravity-induced buoyancy upon the selection of dendritic microstructures. Further ongoing developments include an equivalent formulation for directional solidification conditions and the implementation of the model in three dimensions, which is critical for quantitative comparison to experimental measurements. △ Less

Submitted 16 April, 2019; v1 submitted 23 February, 2019; originally announced February 2019.

Journal ref: Computational Materials Science 162 (2019) 206-227