Showing 1–6 of 6 results for author: Tortorella, Y

A Heterogeneous RISC-V based SoC for Secure Nano-UAV Navigation

Authors: Luca Valente, Alessandro Nadalini, Asif Veeran, Mattia Sinigaglia, Bruno Sa, Nils Wistoff, Yvan Tortorella, Simone Benatti, Rafail Psiakis, Ari Kulmala, Baker Mohammad, Sandro Pinto, Daniele Palossi, Luca Benini, Davide Rossi

Abstract: The rapid advancement of energy-efficient parallel ultra-low-power (ULP) ucontrollers units (MCUs) is enabling the development of autonomous nano-sized unmanned aerial vehicles (nano-UAVs). These sub-10cm drones represent the next generation of unobtrusive robotic helpers and ubiquitous smart sensors. However, nano-UAVs face significant power and payload constraints while requiring advanced comput… ▽ More The rapid advancement of energy-efficient parallel ultra-low-power (ULP) ucontrollers units (MCUs) is enabling the development of autonomous nano-sized unmanned aerial vehicles (nano-UAVs). These sub-10cm drones represent the next generation of unobtrusive robotic helpers and ubiquitous smart sensors. However, nano-UAVs face significant power and payload constraints while requiring advanced computing capabilities akin to standard drones, including real-time Machine Learning (ML) performance and the safe co-existence of general-purpose and real-time OSs. Although some advanced parallel ULP MCUs offer the necessary ML computing capabilities within the prescribed power limits, they rely on small main memories (<1MB) and ucontroller-class CPUs with no virtualization or security features, and hence only support simple bare-metal runtimes. In this work, we present Shaheen, a 9mm2 200mW SoC implemented in 22nm FDX technology. Differently from state-of-the-art MCUs, Shaheen integrates a Linux-capable RV64 core, compliant with the v1.0 ratified Hypervisor extension and equipped with timing channel protection, along with a low-cost and low-power memory controller exposing up to 512MB of off-chip low-cost low-power HyperRAM directly to the CPU. At the same time, it integrates a fully programmable energy- and area-efficient multi-core cluster of RV32 cores optimized for general-purpose DSP as well as reduced- and mixed-precision ML. To the best of the authors' knowledge, it is the first silicon prototype of a ULP SoC coupling the RV64 and RV32 cores in a heterogeneous host+accelerator architecture fully based on the RISC-V ISA. We demonstrate the capabilities of the proposed SoC on a wide range of benchmarks relevant to nano-UAV applications. The cluster can deliver up to 90GOp/s and up to 1.8TOp/s/W on 2-bit integer kernels and up to 7.9GFLOp/s and up to 150GFLOp/s/W on 16-bit FP kernels. △ Less

Submitted 7 January, 2024; originally announced January 2024.

DARKSIDE: A Heterogeneous RISC-V Compute Cluster for Extreme-Edge On-Chip DNN Inference and Training

Authors: Angelo Garofalo, Yvan Tortorella, Matteo Perotti, Luca Valente, Alessandro Nadalini, Luca Benini, Davide Rossi, Francesco Conti

Abstract: On-chip DNN inference and training at the Extreme-Edge (TinyML) impose strict latency, throughput, accuracy and flexibility requirements. Heterogeneous clusters are promising solutions to meet the challenge, combining the flexibility of DSP-enhanced cores with the performance and energy boost of dedicated accelerators. We present DARKSIDE, a System-on-Chip with a heterogeneous cluster of 8 RISC-V… ▽ More On-chip DNN inference and training at the Extreme-Edge (TinyML) impose strict latency, throughput, accuracy and flexibility requirements. Heterogeneous clusters are promising solutions to meet the challenge, combining the flexibility of DSP-enhanced cores with the performance and energy boost of dedicated accelerators. We present DARKSIDE, a System-on-Chip with a heterogeneous cluster of 8 RISC-V cores enhanced with 2-b to 32-b mixed-precision integer arithmetic. To boost performance and efficiency on key compute-intensive Deep Neural Network (DNN) kernels, the cluster is enriched with three digital accelerators: a specialized engine for low-data-reuse depthwise convolution kernels (up to 30 MAC/cycle); a minimal overhead datamover to marshal 1-b to 32-b data on-the-fly; a 16-b floating point Tensor Product Engine (TPE) for tiled matrix-multiplication acceleration. DARKSIDE is implemented in 65nm CMOS technology. The cluster achieves a peak integer performance of 65 GOPS and a peak efficiency of 835 GOPS/W when working on 2-b integer DNN kernels. When targeting floating-point tensor operations, the TPE provides up to 18.2 GFLOPS of performance or 300 GFLOPS/W of efficiency - enough to enable on-chip floating-point training at competitive speed coupled with ultra-low power quantized inference. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Comments: 11 pages, 15 figures

Hybrid Modular Redundancy: Exploring Modular Redundancy Approaches in RISC-V Multi-Core Computing Clusters for Reliable Processing in Space

Authors: Michael Rogenmoser, Yvan Tortorella, Davide Rossi, Francesco Conti, Luca Benini

Abstract: Space Cyber-Physical Systems (S-CPS) such as spacecraft and satellites strongly rely on the reliability of onboard computers to guarantee the success of their missions. Relying solely on radiation-hardened technologies is extremely expensive, and develo** inflexible architectural and microarchitectural modifications to introduce modular redundancy within a system leads to significant area increa… ▽ More Space Cyber-Physical Systems (S-CPS) such as spacecraft and satellites strongly rely on the reliability of onboard computers to guarantee the success of their missions. Relying solely on radiation-hardened technologies is extremely expensive, and develo** inflexible architectural and microarchitectural modifications to introduce modular redundancy within a system leads to significant area increase and performance degradation. To mitigate the overheads of traditional radiation hardening and modular redundancy approaches, we present a novel Hybrid Modular Redundancy (HMR) approach, a redundancy scheme that features a cluster of RISC-V processors with a flexible on-demand dual-core and triple-core lockstep grou** of computing cores with runtime split-lock capabilities. Further, we propose two recovery approaches, software-based and hardware-based, trading off performance and area overhead. Running at 430 MHz, our fault-tolerant cluster achieves up to 1160 MOPS on a matrix multiplication benchmark when configured in non-redundant mode and 617 and 414 MOPS in dual and triple mode, respectively. A software-based recovery in triple mode requires 363 clock cycles and occupies 0.612 mm2, representing a 1.3% area overhead over a non-redundant 12-core RISC-V cluster. As a high-performance alternative, a new hardware-based method provides rapid fault recovery in just 24 clock cycles and occupies 0.660 mm2, namely ~9.4% area overhead over the baseline non-redundant RISC-V cluster. The cluster is also enhanced with split-lock capabilities to enter one of the redundant modes with minimum performance loss, allowing execution of a mission-critical or a performance section, with <400 clock cycles overhead for entry and exit. The proposed system is the first to integrate these functionalities on an open-source RISC-V-based compute device, enabling finely tunable reliability vs. performance trade-offs. △ Less

Submitted 14 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

RedMule: A Mixed-Precision Matrix-Matrix Operation Engine for Flexible and Energy-Efficient On-Chip Linear Algebra and TinyML Training Acceleration

Authors: Yvan Tortorella, Luca Bertaccini, Luca Benini, Davide Rossi, Francesco Conti

Abstract: The increasing interest in TinyML, i.e., near-sensor machine learning on power budgets of a few tens of mW, is currently pushing toward enabling TinyML-class training as opposed to inference only. Current training algorithms, based on various forms of error and gradient backpropagation, rely on floating-point matrix operations to meet the precision and dynamic range requirements. So far, the energ… ▽ More The increasing interest in TinyML, i.e., near-sensor machine learning on power budgets of a few tens of mW, is currently pushing toward enabling TinyML-class training as opposed to inference only. Current training algorithms, based on various forms of error and gradient backpropagation, rely on floating-point matrix operations to meet the precision and dynamic range requirements. So far, the energy and power cost of these operations has been considered too high for TinyML scenarios. This paper addresses the open challenge of near-sensor training on a few mW power budget and presents RedMulE - Reduced-Precision Matrix Multiplication Engine, a low-power specialized accelerator conceived for multi-precision floating-point General Matrix-Matrix Operations (GEMM-Ops) acceleration, supporting FP16, as well as hybrid FP8 formats, with {sign, exponent, mantissa}=({1,4,3}, {1,5,2}). We integrate RedMule into a Parallel Ultra-Low-Power (PULP) cluster containing eight energy-efficient RISC-V cores sharing a tightly-coupled data memory and implement the resulting system in a 22 nm technology. At its best efficiency point (@ 470 MHz, 0.65 V), the RedMulE-augmented PULP cluster achieves 755 GFLOPS/W and 920 GFLOPS/W during regular General Matrix-Matrix Multiplication (GEMM), and up to 1.19 TFLOPS/W and 1.67 TFLOPS/W when executing GEMM-Ops, respectively, for FP16 and FP8 input/output tensors. In its best performance point (@ 613 MHz, 0.8 V), RedMulE achieves up to 58.5 GFLOPS and 117 GFLOPS for FP16 and FP8, respectively, with 99.4% utilization of the array of Computing Elements and consuming less than 60 mW on average, thus enabling on-device training of deep learning models in TinyML application scenarios while retaining the flexibility to tackle other classes of common linear algebra problems efficiently. △ Less

Submitted 6 May, 2023; v1 submitted 10 January, 2023; originally announced January 2023.

HULK-V: a Heterogeneous Ultra-low-power Linux capable RISC-V SoC

Authors: Luca Valente, Yvan Tortorella, Mattia Sinigaglia, Giuseppe Tagliavini, Alessandro Capotondi, Luca Benini, Davide Rossi

Abstract: IoT applications span a wide range in performance and memory footprint, under tight cost and power constraints. High-end applications rely on power-hungry Systems-on-Chip (SoCs) featuring powerful processors, large LPDDR/DDR3/4/5 memories, and supporting full-fledged Operating Systems (OS). On the contrary, low-end applications typically rely on Ultra-Low-Power ucontrollers with a "close to metal"… ▽ More IoT applications span a wide range in performance and memory footprint, under tight cost and power constraints. High-end applications rely on power-hungry Systems-on-Chip (SoCs) featuring powerful processors, large LPDDR/DDR3/4/5 memories, and supporting full-fledged Operating Systems (OS). On the contrary, low-end applications typically rely on Ultra-Low-Power ucontrollers with a "close to metal" software environment and simple micro-kernel-based runtimes. Emerging applications and trends of IoT require the "best of both worlds": cheap and low-power SoC systems with a well-known and agile software environment based on full-fledged OS (e.g., Linux), coupled with extreme energy efficiency and parallel digital signal processing capabilities. We present HULK-V: an open-source Heterogeneous Linux-capable RISC-V-based SoC coupling a 64-bit RISC-V processor with an 8-core Programmable Multi-Core Accelerator (PMCA), delivering up to 13.8 GOps, up to 157 GOps/W and accelerating the execution of complex DSP and ML tasks by up to 112x over the host processor. HULK-V leverages a lightweight, fully digital memory hierarchy based on HyperRAM IoT DRAM that exposes up to 512 MB of DRAM memory to the host CPU. Featuring HyperRAMs, HULK-V doubles the energy efficiency without significant performance loss compared to featuring power-hungry LPDDR memories, requiring expensive and large mixed-signal PHYs. HULK-V, implemented in Global Foundries 22nm FDX technology, is a fully digital ultra-low-cost SoC running a 64-bit Linux software stack with OpenMP host-to-PMCA offload within a power envelope of just 250 mW. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Comments: This paper has been accepted as full paper at DATE23 https://www.date-conference.com/date-2023-accepted-papers#Regular-Papers

RedMulE: A Compact FP16 Matrix-Multiplication Accelerator for Adaptive Deep Learning on RISC-V-Based Ultra-Low-Power SoCs

Authors: Yvan Tortorella, Luca Bertaccini, Davide Rossi, Luca Benini, Francesco Conti

Abstract: The fast proliferation of extreme-edge applications using Deep Learning (DL) based algorithms required dedicated hardware to satisfy extreme-edge applications' latency, throughput, and precision requirements. While inference is achievable in practical cases, online finetuning and adaptation of general DL models are still highly challenging. One of the key stumbling stones is the need for parallel… ▽ More The fast proliferation of extreme-edge applications using Deep Learning (DL) based algorithms required dedicated hardware to satisfy extreme-edge applications' latency, throughput, and precision requirements. While inference is achievable in practical cases, online finetuning and adaptation of general DL models are still highly challenging. One of the key stumbling stones is the need for parallel floating-point operations, which are considered unaffordable on sub-100 mW extreme-edge SoCs. We tackle this problem with RedMulE (Reduced-precision matrix Multiplication Engine), a parametric low-power hardware accelerator for FP16 matrix multiplications - the main kernel of DL training and inference - conceived for tight integration within a cluster of tiny RISC-V cores based on the PULP (Parallel Ultra-Low-Power) architecture. In 22 nm technology, a 32-FMA RedMulE instance occupies just 0.07 mm^2 (14% of an 8-core RISC-V cluster) and achieves up to 666 MHz maximum operating frequency, for a throughput of 31.6 MAC/cycle (98.8% utilization). We reach a cluster-level power consumption of 43.5 mW and a full-cluster energy efficiency of 688 16-bit GFLOPS/W. Overall, RedMulE features up to 4.65x higher energy efficiency and 22x speedup over SW execution on 8 RISC-V cores. △ Less

Submitted 24 April, 2022; originally announced April 2022.