-
Deep-Learning Inversion Method for the Interpretation of Noisy Logging-While-Drilling Resistivity Measurements
Authors:
Kyubo Noh,
David Pardo,
Carlos Torres-Verdin
Abstract:
Deep Learning (DL) inversion is a promising method for real time interpretation of logging while drilling (LWD) resistivity measurements for well navigation applications. In this context, measurement noise may significantly affect inversion results. Existing publications examining the effects of measurement noise on DL inversion results are scarce. We develop a method to generate training data set…
▽ More
Deep Learning (DL) inversion is a promising method for real time interpretation of logging while drilling (LWD) resistivity measurements for well navigation applications. In this context, measurement noise may significantly affect inversion results. Existing publications examining the effects of measurement noise on DL inversion results are scarce. We develop a method to generate training data sets and construct DL architectures that enhance the robustness of DL inversion methods in the presence of noisy LWD resistivity measurements. We use two synthetic resistivity models to test three approaches that explicitly consider the presence of noise: (1) adding noise to the measurements in the training set, (2) augmenting the training set by replicating it and adding varying noise realizations, and (3) adding a noise layer in the DL architecture. Numerical results confirm that the three approaches produce a denoising effect, yielding better inversion results in both predicted earth model and measurements compared not only to the basic DL inversion but also to traditional gradient based inversion results. A combination of the second and third approaches delivers the best results. The proposed methods can be readily generalized to multi dimensional DL inversion.
△ Less
Submitted 14 November, 2021;
originally announced November 2021.
-
Ensemble-Based Well Log Interpretation and Uncertainty Quantification for Geosteering
Authors:
Nazanin Jahani,
Joaquin Ambia Garrido,
Sergey Alyaev,
Kristian Fossum,
Erich Suter,
Carlos Torres-Verdin
Abstract:
The costs for drilling offshore wells are high and hydrocarbons are often located in complex reservoir formations. To effectively produce from such reservoirs and reduce costs, optimized well placement in real-time (geosteering) is crucial. Geosteering is usually assisted by an updated formation evaluation obtained by well-log interpretation while drilling. A reliable, computationally efficient, a…
▽ More
The costs for drilling offshore wells are high and hydrocarbons are often located in complex reservoir formations. To effectively produce from such reservoirs and reduce costs, optimized well placement in real-time (geosteering) is crucial. Geosteering is usually assisted by an updated formation evaluation obtained by well-log interpretation while drilling. A reliable, computationally efficient, and robust workflow to interpret well logs and capture uncertainties in real-time is necessary for this application. An iterative ensemble-based method, namely the approximate Levenberg Marquardt form of the Ensemble Randomized Maximum Likelihood (LM-EnRML) is integrated in our formation evaluation workflow. We estimate model parameters, resistivity and density in addition to boundary locations, and related uncertainties by reducing the statistical misfit between the measurements from the well logging tools and the theoretical measurements from the forward tool simulators. The results of analyzing several synthetic cases with several types of logs verified that the proposed method can give good estimate of model parameters.
By comparing the CPU time, we conclude that the proposed method has at least about 10--125 times lower computational time compare to a common statistical method, such as Metropolis-Hastings Monte Carlo. In addition, the ensemble-based method can run in parallel on multiple CPUs. Testing the method on a case inspired from a real field also yielded accurate formation evaluation. Thus, the proposed ensemble-based method has been proven robust and computationally efficient to estimate petrophysical formation properties, layer boundaries and their uncertainties, indicating that it is suitable for geosteering.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Error Control and Loss Functions for the Deep Learning Inversion of Borehole Resistivity Measurements
Authors:
M. Shahriari,
D. Pardo,
J. A. Rivera,
C. Torres-Verdín,
A. Picon,
J. Del Ser,
S. Ossandón,
V. M. Calo
Abstract:
Deep learning (DL) is a numerical method that approximates functions. Recently, its use has become attractive for the simulation and inversion of multiple problems in computational mechanics, including the inversion of borehole logging measurements for oil and gas applications. In this context, DL methods exhibit two key attractive features: a) once trained, they enable to solve an inverse problem…
▽ More
Deep learning (DL) is a numerical method that approximates functions. Recently, its use has become attractive for the simulation and inversion of multiple problems in computational mechanics, including the inversion of borehole logging measurements for oil and gas applications. In this context, DL methods exhibit two key attractive features: a) once trained, they enable to solve an inverse problem in a fraction of a second, which is convenient for borehole geosteering operations as well as in other real-time inversion applications. b) DL methods exhibit a superior capability for approximating highly-complex functions across different areas of knowledge. Nevertheless, as it occurs with most numerical methods, DL also relies on expert design decisions that are problem specific to achieve reliable and robust results. Herein, we investigate two key aspects of deep neural networks (DNNs) when applied to the inversion of borehole resistivity measurements: error control and adequate selection of the loss function. As we illustrate via theoretical considerations and extensive numerical experiments, these interrelated aspects are critical to recover accurate inversion results.
△ Less
Submitted 28 May, 2020; v1 submitted 7 May, 2020;
originally announced May 2020.
-
A Deep Learning Approach to the Inversion of Borehole Resistivity Measurements
Authors:
M. Shahriari,
D. Pardo,
A. Picón,
A. Galdrán,
J. Del Ser,
C. Torres-Verdín
Abstract:
We use borehole resistivity measurements to map the electrical properties of the subsurface and to increase the productivity of a reservoir. When used for geosteering purposes, it becomes essential to invert them in real time. In this work, we explore the possibility of using Deep Neural Network (DNN) to perform a rapid inversion of borehole resistivity measurements. Herein, we build a DNN that ap…
▽ More
We use borehole resistivity measurements to map the electrical properties of the subsurface and to increase the productivity of a reservoir. When used for geosteering purposes, it becomes essential to invert them in real time. In this work, we explore the possibility of using Deep Neural Network (DNN) to perform a rapid inversion of borehole resistivity measurements. Herein, we build a DNN that approximates the following inverse problem: given a set of borehole resistivity measurements, the DNN is designed to deliver a physically meaningful and data-consistent piecewise one-dimensional layered model of the surrounding subsurface. Once the DNN is built, we can perform the actual inversion of the field measurements in real time. We illustrate the performance of DNN of logging-while-drilling measurements acquired on high-angle wells via synthetic data.
△ Less
Submitted 9 January, 2019; v1 submitted 5 October, 2018;
originally announced October 2018.
-
Application of effective medium theory to estimate gas permeability in tight-gas sandstones
Authors:
Behzad Ghanbarian,
Carlos Torres-Verdin,
Larry W. Lake,
Michael Marder
Abstract:
Upscaling Klinkenberg-corrected gas permeability, k, in unconventional tight sandstones has numerous practical applications, particularly in gas exploration and production. In this study, we adapt the effective-medium approximation (EMA) model of Doyen - proposed first to estimate bulk electrical conductivity, σ_b, and permeability in sandstones from rock images - to scale up σ_b and k in tight-ga…
▽ More
Upscaling Klinkenberg-corrected gas permeability, k, in unconventional tight sandstones has numerous practical applications, particularly in gas exploration and production. In this study, we adapt the effective-medium approximation (EMA) model of Doyen - proposed first to estimate bulk electrical conductivity, σ_b, and permeability in sandstones from rock images - to scale up σ_b and k in tight-gas sandstones from pore to core. For this purpose, we calculate two characteristic pore sizes: an effective hydraulic and an effective electrical pore size from pore-throat size distributions - determined from mercury intrusion capillary pressure (MICP) curves - and pore-throat connectivity. The latter is estimated from critical volume fraction (or percolation threshold) for macroscopic flow. Electrical conductivity and permeability are then scaled up from the two characteristic pore sizes, tortuosity, and porosity by assuming two different pore geometries: cylindrical and slit-shaped. Comparison of results obtained for eighteen tight-gas sandstones indicates that the EMA estimates σ_b and k more accurately when pores are assumed to be cylindrical. We also estimate k from the pore-throat size distributions and the measured electrical conductivity using the EMA and critical path analysis (CPA), another upscaling technique borrowed from statistical physics. Theoretically, the former is valid in relatively heterogeneous porous media with narrow pore-throat size distribution, while the latter is valid in heterogeneous media with broad pore-throat size distribution. Results show that the EMA estimates k more accurately than CPA and arrives within a factor of two of the measurements on average.
△ Less
Submitted 16 September, 2018;
originally announced September 2018.
-
Multidimensional NMR Inversion without Kronecker Products: Multilinear Inversion
Authors:
David Medellín,
Vivek R. Ravi,
Carlos Torres-Verdín
Abstract:
Multidimensional NMR inversion using Kronecker products poses several challenges. First, kernel compression is only possible when the kernel matrices are separable, and in recent years, there has been an increasing interest in NMR sequences with non-separable kernels. Second, in three or more dimensions, the singular value decomposition is not unique; therefore kernel compression is not well-defin…
▽ More
Multidimensional NMR inversion using Kronecker products poses several challenges. First, kernel compression is only possible when the kernel matrices are separable, and in recent years, there has been an increasing interest in NMR sequences with non-separable kernels. Second, in three or more dimensions, the singular value decomposition is not unique; therefore kernel compression is not well-defined for higher dimensions. Without kernel compression, the Kronecker product yields matrices that require large amounts of memory, making the inversion intractable for personal computers. Finally, incorporating arbitrary regularization terms is not possible using the Lawson-Hanson (LH) or the Butler-Reeds-Dawson (BRD) algorithms. We develop a minimization-based inversion method that circumvents the above problems by using multilinear forms to perform multidimensional NMR inversion without using kernel compression or Kronecker products. The new method is memory efficient, requiring less than 0.1% of the memory required by the LH or BRD methods. It can also be extended to arbitrary dimensions and adapted to include non-separable kernels, linear constraints, and arbitrary regularization terms. Additionally, it is easy to implement because only a cost function and its first derivative are required to perform the inversion.
△ Less
Submitted 20 May, 2016; v1 submitted 19 May, 2016;
originally announced May 2016.