-
Engineering heat transport across epitaxial lattice-mismatched van der Waals heterointerfaces
Authors:
Emigdio Chavez-Angel,
Polychronis Tsipas,
Peng Xiao,
Mohammad Taghi Ahmadi,
Abdalghani Daaoub,
Hatef Sadeghi,
Clivia M. Sotomayor Torres,
Athanasios Dimoulas,
Alexandros El Sachat
Abstract:
Artificially engineered 2D materials offer unique physical properties for thermal management, surpassing naturally occurring materials. Here, using van der Waals epitaxy, we demonstrate the ability to engineer extremely insulating ultra-thin thermal metamaterials based on crystalline lattice-mismatched Bi2Se3/MoSe2 superlattices and graphene/PdSe2 heterostructures with exceptional thermal resistan…
▽ More
Artificially engineered 2D materials offer unique physical properties for thermal management, surpassing naturally occurring materials. Here, using van der Waals epitaxy, we demonstrate the ability to engineer extremely insulating ultra-thin thermal metamaterials based on crystalline lattice-mismatched Bi2Se3/MoSe2 superlattices and graphene/PdSe2 heterostructures with exceptional thermal resistances (70-202 m^2K/GW) and ultralow cross-plane thermal conductivities (0.01-0.07 Wm^-1K^-1) at room temperature, comparable to those of amorphous materials. Experimental data obtained using frequency-domain thermoreflectance and low-frequency Raman spectroscopy, supported by tight-binding phonon calculations, reveal the impact of lattice mismatch, phonon-interface scattering, size effects, temperature and interface thermal resistance on cross-plane heat dissipation, uncovering different thermal transport regimes and the dominant role of long-wavelength phonons. Our findings provide essential insights into emerging synthesis and thermal characterization methods and valuable guidance for the development of large-area heteroepitaxial van der Waals films of dissimilar materials with tailored thermal transport characteristics.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Thermal insulation and heat guiding using nanopatterned MoS2
Authors:
Peng Xiao,
Alexandros El Sachat,
Emigdio Chávez Angel,
Giorgos Nikoulis,
Joseph Kioseoglou,
Konstantinos Termentzidis,
Clivia M. Sotomayor Torres,
Marianna Sledzinska
Abstract:
In the modern electronics overheating is one of the major reasons for device failure. Overheating causes irreversible damage to circuit components and can also lead to fire, explosions, and injuries. Accordingly, in the advent of 2D material-based electronics, an understanding of their thermal properties in addition to their electric ones is crucial to enable efficient transfer of excess heat away…
▽ More
In the modern electronics overheating is one of the major reasons for device failure. Overheating causes irreversible damage to circuit components and can also lead to fire, explosions, and injuries. Accordingly, in the advent of 2D material-based electronics, an understanding of their thermal properties in addition to their electric ones is crucial to enable efficient transfer of excess heat away from the electronic components. In this work we propose structures based on free-standing, few-layer, nanopatterned MoS2 that insulate and guide heat in the in-plane direction. We arrive at these designs via a thorough study of the in-plane thermal conductivity as a function of thickness, porosity, and temperature in both pristine and nanopatterned MoS2 membranes. Two-laser Raman thermometry was employed to measure the thermal conductivities of a set of free-standing MoS2 flakes with diameters greater than 20 um and thicknesses from 5 to 40 nm, resulting in values from 30 to 85 W/mK, respectively. After nanopatterning a square lattice of 100-nm diameter holes with a focused ion beam we have obtained a greater than 10-fold reduction of the thermal conductivities for the period of 500 nm and values below 1 W/mK for the period of 300 nm. The results were supported by equilibrium molecular dynamic simulations for both pristine and nanopatterned MoS2. The selective patterning of certain areas results in extremely large difference in thermal conductivities within the same material. Exploitation of this effect enabled for the first time thermal insulation and heat guiding in the few-layer MoS2. The patterned regions act as high thermal resistors: we obtained a thermal resistance of 4x10-6 m2K/W with only four patterned lattice periods of 300 nm, highlighting the significant potential of MoS2 for thermal management applications.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Phonon dynamics and thermal conductivity of PtSe2 thin films: Impact of crystallinity and film thickness on heat dissipation
Authors:
Alexandros El Sachat,
Peng Xiao,
Davide Donadio,
Frédéric Bonell,
Marianna Sledzinska,
Alain Marty,
Céline Vergnaud,
Hervé Boukari,
Matthieu Jamet,
Guillermo Arregui,
Zekun Chen,
Francesc Alzina,
Clivia M. Sotomayor Torres,
Emigdio Chavez-Angel
Abstract:
We present a comparative investigation of the influence of crystallinity and film thickness on the acoustic and thermal properties of 2D layered PtSe2 thin films of varying thickness (0.6-24 nm) by combining a set of experimental techniques, namely, frequency domain thermo-reflectance, low-frequency Raman and pump-probe coherent phonon spectroscopy. We find a 35% reduction in the cross-plane therm…
▽ More
We present a comparative investigation of the influence of crystallinity and film thickness on the acoustic and thermal properties of 2D layered PtSe2 thin films of varying thickness (0.6-24 nm) by combining a set of experimental techniques, namely, frequency domain thermo-reflectance, low-frequency Raman and pump-probe coherent phonon spectroscopy. We find a 35% reduction in the cross-plane thermal conductivity of polycrystalline films with thickness larger than 12 nm compared to the crystalline films of the same thickness due to phonon grain boundary scattering. Density functional theory calculations are in good agreement with the experiments and further reveal the ballistic nature of cross-plane heat transport in PtSe2 up to a certain thickness (~20 nm). In addition, our experiments revealed strong interlayer interactions in PtSe2, short acoustic phonon lifetimes in the range of picoseconds, out-of-plane elastic constant C33=31.8 GPa and layer-dependent group velocity ranging from 1340 m/s in bilayer PtSe2 to 1873 m/s in 8 layers of PtSe2. The potential of tuning the lattice cross-plane thermal conductivity of layered 2D materials with the level of crystallinity and the real-time observation of coherent phonon dynamics, which have direct implications on the cooling and transport of electrons, open a new playground for research in 2D thermoelectric devices and provide guidelines for thermal management in 2D electronics.
△ Less
Submitted 29 November, 2021; v1 submitted 26 November, 2021;
originally announced November 2021.
-
Cavity optomechanics with Anderson-localized optical modes
Authors:
Guillermo Arregui,
Ryan Cecil Ng,
Marcus Albrechtsen,
Søren Stobbe,
Clivia Marfa Sotomayor Torres,
Pedro David García
Abstract:
Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencie…
▽ More
Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes that are below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed $g_{\text{o}}/2π\sim 200$ kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our work constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with multitude mutually-coupled degrees of freedom.
△ Less
Submitted 1 April, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Unraveling heat transport and dissipation in suspended MoSe$_2$ crystals from bulk to monolayer
Authors:
D. Saleta Reig,
S. Varghese,
R. Farris,
A. Block,
J. D. Mehew,
O. Hellman,
P. Woźniak,
M. Sledzinska,
A. El Sachat,
E. Chávez-Ángel,
S. O. Valenzuela,
N. F. Van Hulst,
P. Ordejón,
Z. Zanolli,
C. M. Sotomayor Torres,
M. J. Verstraete,
K. J. Tielrooij
Abstract:
Understanding thermal transport in layered transition metal dichalcogenide (TMD) crystals is crucial for a myriad of applications exploiting these materials. Despite significant efforts, several basic thermal transport properties of TMDs are currently not well understood. Here, we present a combined experimental-theoretical study of the intrinsic lattice thermal conductivity of the representative…
▽ More
Understanding thermal transport in layered transition metal dichalcogenide (TMD) crystals is crucial for a myriad of applications exploiting these materials. Despite significant efforts, several basic thermal transport properties of TMDs are currently not well understood. Here, we present a combined experimental-theoretical study of the intrinsic lattice thermal conductivity of the representative TMD MoSe$_2$, focusing on the effect of material thickness and the material's environment. We use Raman thermometry measurements on suspended crystals, where we identify and eliminate crucial artefacts, and perform $ab$ $initio$ simulations with phonons at finite, rather than zero, temperature. We find that phonon dispersions and lifetimes change strongly with thickness, yet (sub)nanometer thin TMD films exhibit a similar in-plane thermal conductivity ($\sim$20~Wm$^{-1}$K$^{-1}$) as bulk crystals ($\sim$40~Wm$^{-1}$K$^{-1}$). This is the result of compensating phonon contributions, in particular low-frequency modes with a surprisingly long mean free path of several micrometers that contribute significantly to thermal transport for monolayers. We furthermore demonstrate that out-of-plane heat dissipation to air is remarkably efficient, in particular for the thinnest crystals. These results are crucial for the design of TMD-based applications in thermal management, thermoelectrics and (opto)electronics.
△ Less
Submitted 19 September, 2021;
originally announced September 2021.
-
Heat dissipation in few-layer MoS2 and MoS2/hBN heterostructure
Authors:
Alois Arrighi,
Elena del Corro,
Daniel Navarro Urrios,
Marius V. Costache,
Juan F. Sierra,
Kenji Watanabe,
Takashi Taniguchi,
J. A. Garrido,
Sergio O. Valenzuela,
Clivia M. Sotomayor Torres,
Marianna Sledzinska
Abstract:
State-of-the-art fabrication and characterization techniques have been employed to measure the thermal conductivity of suspended, single-crystalline MoS2 and MoS2/hBN heterostructures. Two-laser Raman scattering thermometry was used combined with real time measurements of the absorbed laser power, which allowed us to determine the thermal conductivities without any assumptions. Measurements on MoS…
▽ More
State-of-the-art fabrication and characterization techniques have been employed to measure the thermal conductivity of suspended, single-crystalline MoS2 and MoS2/hBN heterostructures. Two-laser Raman scattering thermometry was used combined with real time measurements of the absorbed laser power, which allowed us to determine the thermal conductivities without any assumptions. Measurements on MoS2 layers with thicknesses of 5 and 14 exhibit thermal conductivity in the range between 12 and 24 Wm-1K-1. Additionally, after determining the thermal conductivity of a selected MoS2 sample, an hBN flake was transferred onto it and the effective thermal conductivity of the heterostructure was subsequently measured. Remarkably, despite that the thickness of the hBN layer was less than a third of the thickness of the MoS2 layer, the heterostructure showed an almost eight-fold increase in the thermal conductivity, being able to dissipate more than 10 times the laser power without any visible sign of damage. These results are consistent with a high thermal interface conductance between MoS2 and hBN and an efficient in-plane heat spreading driven by hBN. Indeed, we estimate G 70 MWm-2K-1 which is significantly higher than previously reported values. Our work therefore demonstrates that the insertion of hBN layers in potential MoS2 based devices holds the promise for efficient thermal management.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Injection locking in an optomechanical coherent phonon source
Authors:
Guillermo Arregui,
Martin Facundo Colombano,
Jérémie Maire,
Alessandro Pitanti,
Nestor Eduardo Capuj,
Amadeu Griol,
Alejandro Martínez,
Clivia Marfa Sotomayor Torres,
Daniel Navarro Urrios
Abstract:
Spontaneous locking of the phase of a coherent phonon source to an external reference is demonstrated in an optomechanical oscillator based on a self-triggered free-carrier/temperature limit cycle. Synchronization is observed when the pump laser driving the mechanical oscillator to a self-sustained state is modulated by a radiofrequency tone. We employ a pump-probe phonon detection scheme based on…
▽ More
Spontaneous locking of the phase of a coherent phonon source to an external reference is demonstrated in an optomechanical oscillator based on a self-triggered free-carrier/temperature limit cycle. Synchronization is observed when the pump laser driving the mechanical oscillator to a self-sustained state is modulated by a radiofrequency tone. We employ a pump-probe phonon detection scheme based on an independent optical cavity to observe only the mechanical oscillator dynamics. The lock range of the oscillation frequency, i.e., the Arnold tongue, is experimentally determined over a range of external reference strengths, evidencing the possibility to tune the oscillator frequency for a range up to 350 kHz. The stability of the coherent phonon source is evaluated via its phase noise, with a maximum achieved suppression of 44 dBc/Hz at 1kHz offset for a 100 MHz mechanical resonator. Introducing a weak modulation in the excitation laser reveals as a further knob to trigger, control and stabilise the dynamical solutions of self-pulsing based optomechanical oscillators, thus enhancing their potential as acoustic wave sources in a single layer silicon platform.
△ Less
Submitted 24 September, 2020; v1 submitted 18 September, 2020;
originally announced September 2020.
-
Thermal transport in nanoporous holey silicon membranes investigated with optically-induced transient thermal gratings
Authors:
Ryan A. Duncan,
Giuseppe Romano,
Marianna Sledzinska,
Alexei A. Maznev,
Jean-Philippe M. Peraud,
Olle Hellman,
Clivia M. Sotomayor Torres,
Keith A. Nelson
Abstract:
In this study, we use the transient thermal grating optical technique \textemdash a non-contact, laser-based thermal metrology technique with intrinsically high accuracy \textemdash to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 100 nm and 250 nm respectively. We compare the experimental results to ab initio c…
▽ More
In this study, we use the transient thermal grating optical technique \textemdash a non-contact, laser-based thermal metrology technique with intrinsically high accuracy \textemdash to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 100 nm and 250 nm respectively. We compare the experimental results to ab initio calculations of phonon-mediated thermal transport according to the phonon Boltzmann transport equation (BTE) using two different computational techniques. We find that the calculations conducted within the Casimir framework, i.e. based on the BTE with the bulk phonon dispersion and diffuse scattering from surfaces, are in quantitative agreement with the experimental data, and thus conclude that this framework is adequate for describing phonon-mediated thermal transport through holey silicon membranes with feature sizes on the order of 100 nm.
△ Less
Submitted 20 October, 2020; v1 submitted 12 December, 2019;
originally announced December 2019.
-
Fracturing of polycrystalline MoS$_2$ nanofilms
Authors:
M. Sledzinska,
G. Jumbert,
M. Placidi,
A. Arrighi,
P. Xiao,
F. Alzina,
C. M. Sotomayor Torres
Abstract:
The possibility of tailoring the critical strain of 2D materials will be crucial for the fabrication of flexible devices. In this paper, the fracture in polycrystalline MoS2 films with two different grain orientations is studied at the micro- and nanoscale using electron microscopy. The critical uniaxial strain is determined to be approximately 5% and independent of the sample morphology. However,…
▽ More
The possibility of tailoring the critical strain of 2D materials will be crucial for the fabrication of flexible devices. In this paper, the fracture in polycrystalline MoS2 films with two different grain orientations is studied at the micro- and nanoscale using electron microscopy. The critical uniaxial strain is determined to be approximately 5% and independent of the sample morphology. However, electron beam irradiation is found to enhance the interaction between the MoS2 and the PDMS substrates, leading to an increased critical strain that can exceed 10%. This enhancement of strain resistance was used to fabricate a mechanically robust array of lines 1 mm in length. Finally, nanoscale crack propagation studied by transmission electron microscopy showed that cracks propagate along the grain boundaries as well as through the grains, preferentially along van der Waals bonding. These results provide insight regarding the fracture of polycrystalline 2D materials and a new method to tailor the critical strain and nanofabrication of ultra-thin MoS2 devices using well-developed tools, which will be of great interest to the flexible electronics industry.
△ Less
Submitted 25 November, 2019;
originally announced November 2019.
-
All-optical radiofrequency modulation of Anderson-localized modes
Authors:
Guillermo Arregui,
Daniel Navarro-Urrios,
Nikolaos Kehagias,
Clivia Marfa Sotomayor Torres,
Pedro David Garcia
Abstract:
All-optical modulation of light relies on exploiting intrinsic material nonlinearities. However, this optical control is rather challenging due to the weak dependence of the refractive index and absorption coefficients on the concentration of free carriers in standard semiconductors. To overcome this limitation, resonant structures with high spatial and spectral confinement are carefully designed…
▽ More
All-optical modulation of light relies on exploiting intrinsic material nonlinearities. However, this optical control is rather challenging due to the weak dependence of the refractive index and absorption coefficients on the concentration of free carriers in standard semiconductors. To overcome this limitation, resonant structures with high spatial and spectral confinement are carefully designed to enhance the stored electromagnetic energy, thereby requiring lower excitation power to achieve significant nonlinear effects. Small mode-volume and high quality (Q)-factor cavities also offer an efficient coherent control of the light field and the targeted optical properties. Here, we report on optical resonances reaching Q - 10^5 induced by disorder on novel photonic/phononic crystal waveguides. At relatively low excitation powers (below 1 mW), these cavities exhibit nonlinear effects leading to periodic (up to - 35 MHz) oscillations of their resonant wavelength. Our system represents a test-bed to study the interplay between structural complexity and material nonlinearities and their impact on localization phenomena and introduces a novel functionality to the toolset of disordered photonics.
△ Less
Submitted 10 October, 2018;
originally announced October 2018.
-
Thermal conductivity of disordered porous membranes
Authors:
Marianna Sledzinska,
Bartlomiej Graczykowski,
Francesc Alzina,
Umberto Melia,
Konstantinos Termentzidis,
David Lacroix,
Clivia M. Sotomayor Torres
Abstract:
We report measurements and Monte Carlo simulations of thermal conductivity of porous 100nm- thick silicon membranes, in which size, shape and position of the pores were varied randomly. Measurements using 2-laser Raman thermometry on both plain membrane and porous membranes revealed more than 10-fold reduction of thermal conductivity compared to bulk silicon and six-fold reduction compared to non-…
▽ More
We report measurements and Monte Carlo simulations of thermal conductivity of porous 100nm- thick silicon membranes, in which size, shape and position of the pores were varied randomly. Measurements using 2-laser Raman thermometry on both plain membrane and porous membranes revealed more than 10-fold reduction of thermal conductivity compared to bulk silicon and six-fold reduction compared to non-patterned membrane for the sample with 37% filling fraction. Using Monte Carlo solution of the Boltzmann transport equation for phonons we compared different possibilities of pore organization and its influence on the thermal conductivity of the samples. The simulations confirmed that the strongest reduction of thermal conductivity is achieved for a distribution of pores with arbitrary shapes that partly overlap. Up to 15% reduction of thermal conductivity with respect to the purely circular pores was predicted for a porous membrane with 37% filling fraction. The effect of pore shape, distribution and surface roughness is further discussed.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Anderson photon-phonon co-localization in certain random superlattices
Authors:
Guillermo Arregui,
Norberto Daniel Lanzillotti Kimura,
Clivia Marfa Sotomayor Torres,
Pedro David García
Abstract:
Fundamental concepts in quantum physics and technological applications ranging from the detection of gravitational waves to the generation of stimulated Brillouin scattering rely on the interaction between the optical and the mechanical degrees of freedom.\ A key parameter to engineer this interaction is the spatial overlap between the two fields, optimized in carefully designed resonators on a ca…
▽ More
Fundamental concepts in quantum physics and technological applications ranging from the detection of gravitational waves to the generation of stimulated Brillouin scattering rely on the interaction between the optical and the mechanical degrees of freedom.\ A key parameter to engineer this interaction is the spatial overlap between the two fields, optimized in carefully designed resonators on a case-by-case basis.\ Disorder is an alternative strategy to confine light and sound at the nanoscale.\ However, it lacks an \textit{a priori} mechanism guaranteeing a high degree of co-localization due to the inherently complex nature of the underlying interference process.\ Here, we propose a way to address this challenge by using GaAs/AlAs vertical distributed Bragg reflectors with embedded geometrical disorder.\ Due to a remarkable coincidence in the physical parameters governing light and motion propagation in these two materials, the equations for both longitudinal acoustic waves in the growth direction and normal-incidence light become practically equivalent for excitations of the same wavelength.\ This guarantees spatial overlap between photons and phonons leading to a statistically significant enhancement in the vacuum optomechanical coupling rate, $g_{0}$, and making this system a promising candidate to explore Anderson localization of high frequency ($\sim$ 20 GHz) phonons enabled by cavity optomechanics.\
△ Less
Submitted 1 June, 2018;
originally announced June 2018.
-
Record Low Thermal Conductivity of Polycrystalline MoS2 films: Tuning the Thermal Conductivity by Grain Orientation
Authors:
M. Sledzinska,
R. Quey,
B. Mortazavi,
B. Graczykowski,
M. Placidi,
D. Saleta Reig,
D. Navarro-Urrios,
F. Alzina,
L. Colombo,
S. Roche,
C. M. Sotomayor Torres
Abstract:
We report a record low thermal conductivity in polycrystalline MoS2 obtained by varying grain sizes and orientations in ultrathin films. By optimizing the sulphurisation parameters of nanometre-thick Mo layer, we could grow MoS2 films with tuneable morphologies. The thermal conductivity is extracted from a Raman laser power-dependent study on suspended samples. The lowest value of thermal conducti…
▽ More
We report a record low thermal conductivity in polycrystalline MoS2 obtained by varying grain sizes and orientations in ultrathin films. By optimizing the sulphurisation parameters of nanometre-thick Mo layer, we could grow MoS2 films with tuneable morphologies. The thermal conductivity is extracted from a Raman laser power-dependent study on suspended samples. The lowest value of thermal conductivity of 0.27 Wm-1K-1, which reaches a similar value as teflon, is obtained in a polycrystalline sample formed by a combination of horizontally and vertically oriented grains, with respect to the bulk (001) monocrystal. Analysis by means of molecular dynamics and finite element method simulations confirm that such grain arrangement leads to lower grain boundary conductance. We discuss the possible use of these thermal insulating films in the context of electronics and thermoelectricity.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Thermal conductivity of MoS2 polycrystalline nanosheets
Authors:
M. Sledzinska,
B. Graczykowski,
M. Placidi,
D. Saleta Reig,
A. El Sachat,
J. S. Reparaz,
F. Alzina,
S. Roche,
B. Mortazavi,
R. Quey,
C. M. Sotomayor Torres
Abstract:
We report a technique for transferring large areas of the CVD-grown, few-layer MoS2 from the original substrate to another arbitrary substrate and onto holey substrates, in order to obtain free-standing structures. The method consists of a polymer- and residue-free, surface-tension-assisted wet transfer, in which we take advantage of the hydrophobic properties of the MoS2. The methods yields bette…
▽ More
We report a technique for transferring large areas of the CVD-grown, few-layer MoS2 from the original substrate to another arbitrary substrate and onto holey substrates, in order to obtain free-standing structures. The method consists of a polymer- and residue-free, surface-tension-assisted wet transfer, in which we take advantage of the hydrophobic properties of the MoS2. The methods yields better quality transferred layers, with fewer cracks and defects, and less contamination than the widely used PMMA-mediated transfer and allows fabrication of few-layer, fee-standing structures with diameters up to 100 micro-m. We report thermal conductivity measurements by means of contactless Raman thermometry on the so-fabricated samples. The measurements revealed a strong reduction in the in-plane thermal conductivity down to 0.5 W/mK. The results are explained using finite elements method simulations for a polycrystalline film.
△ Less
Submitted 20 April, 2016; v1 submitted 17 April, 2016;
originally announced April 2016.
-
Two-Dimensional Phononic Crystals: Disorder Matters
Authors:
Markus R. Wagner,
Bartlomiej Graczykowski,
Juan Sebastian Reparaz,
Alexandros El Sachat,
Marianna Sledzinska,
Francesc Alzina,
Clivia M. Sotomayor Torres
Abstract:
The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic and thermal properties of two-dimensional PnCs. PnCs…
▽ More
The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic and thermal properties of two-dimensional PnCs. PnCs of ordered and disordered lattices are fabricated of circular holes with equal filling fractions in free-standing Si membranes. Ultrafast pump and probe spectroscopy (asynchronous optical sampling) and Raman thermometry based on a novel two-laser approach are used to study the phononic properties in the gigahertz (GHz) and terahertz (THz) regime, respectively. Finite element method simulations of the phonon dispersion relation and three-dimensional displacement fields furthermore enable the unique identification of the different hypersonic vibrations. The increase of surface roughness and the introduction of short-range disorder are shown to modify the phonon dispersion and phonon coherence in the hypersonic (GHz) range without affecting the room-temperature thermal conductivity. On the basis of these findings, we suggest a criteria for predicting phonon coherence as a function of roughness and disorder.
△ Less
Submitted 3 September, 2016; v1 submitted 23 November, 2015;
originally announced November 2015.
-
Optical and mechanical properties of nanofibrillated cellulose: towards a robust platform for next-generation green technologies
Authors:
Claudia D. Simao,
Juan S. Reparaz,
Markus. R. Wagner,
Bartlomiej Graczykowski,
Martin Kreuzer,
Yasser B. Ruiz-Blanco,
Yamila Garcia,
Jani-Markus Malho,
Alejandro R. Goni,
Jouni Ahopelto,
Clivia M. Sotomayor Torres
Abstract:
Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in Nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. The results obtained show the precise determination of significant properties as elastic properties and…
▽ More
Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in Nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
-
Reconstructing phonon mean free path contributions to thermal conductivity using nanoscale membranes
Authors:
John Cuffe,
Jeffery K. Eliason,
Alexei A. Maznev,
Kimberlee C. Collins,
Jeremy A. Johnson,
Andrey Shchepetov,
Mika Prunnila,
Jouni Ahopelto,
Clivia M. Sotomayor Torres,
Gang Chen,
Keith A. Nelson
Abstract:
Knowledge of the mean free path distribution of heat-carrying phonons is key to understanding phonon-mediated thermal transport. We demonstrate that thermal conductivity measurements of thin membranes spanning a wide thickness range can be used to characterize how bulk thermal conductivity is distributed over phonon mean free paths. A non-contact transient thermal grating technique was used to mea…
▽ More
Knowledge of the mean free path distribution of heat-carrying phonons is key to understanding phonon-mediated thermal transport. We demonstrate that thermal conductivity measurements of thin membranes spanning a wide thickness range can be used to characterize how bulk thermal conductivity is distributed over phonon mean free paths. A non-contact transient thermal grating technique was used to measure the thermal conductivity of suspended Si membranes ranging from 15 to 1500 nm in thickness. A decrease in the thermal conductivity from 74% to 13% of the bulk value is observed over this thickness range, which is attributed to diffuse phonon boundary scattering. Due to the well-defined relation between the membrane thickness and phonon mean free path suppression, combined with the range and accuracy of the measurements, we can reconstruct the bulk thermal conductivity accumulation vs. phonon mean free path, and compare with theoretical models.
△ Less
Submitted 28 August, 2014;
originally announced August 2014.
-
A self-stabilized coherent phonon source driven by optical forces
Authors:
Daniel Navarro-Urrios,
Nestor E. Capuj,
Jordi Gomis-Bresco,
Francesc Alzina,
Alessandro Pitanti,
Amadeu Griol,
Alejandro Martinez,
Clivia M. Sotomayor Torres
Abstract:
Optical forces can set tiny objects into states of coherent mechanical oscillation, also known as mechanical or phonon lasing. We present a novel pum** mechanism in an opto-mechanical photonic crystal that realizes mechanical lasing with relaxed requirements for the optical-mechanical modes and their inter-coupling. It derives from a spontaneously triggered thermal/free carrier self-pulsing and…
▽ More
Optical forces can set tiny objects into states of coherent mechanical oscillation, also known as mechanical or phonon lasing. We present a novel pum** mechanism in an opto-mechanical photonic crystal that realizes mechanical lasing with relaxed requirements for the optical-mechanical modes and their inter-coupling. It derives from a spontaneously triggered thermal/free carrier self-pulsing and the anharmonic modulation of the radiation pressure force that comes as a consequence. Moreover, the feedback of the mechanics on the self-pulsing frequency-entrains both oscillators, creating a self-stabilized indecomposable system. A manifold of frequency-entrained regions with two different mechanical modes (at 54 and 122 MHz) are observed as a result of the wide tuneability of the natural frequency of the self-pulsing. The system operates at ambient conditions of pressure and temperature in a silicon compatible platform, which enables its exploitation in sensing, intra-chip metrology or time-kee** applications.
△ Less
Submitted 7 August, 2014; v1 submitted 24 March, 2014;
originally announced March 2014.
-
Order quantification of hexagonal periodic arrays fabricated by in situ solvent-assisted nanoimprint lithography of block copolymers
Authors:
Claudia Simao,
Worawut Khunsin,
Nikolaos Kehagias,
Mathieu Salaun,
Marc Zelsmann,
Michael A. Morris,
Clivia M. Sotomayor Torres
Abstract:
Directed self-assembly of block copolymer polystyrene-b-polyethylene oxide (PS-b-PEO) thin film was achieved by one-pot methodology of solvent vapour assisted nanoimprint lithography (SAIL).
Directed self-assembly of block copolymer polystyrene-b-polyethylene oxide (PS-b-PEO) thin film was achieved by one-pot methodology of solvent vapour assisted nanoimprint lithography (SAIL).
△ Less
Submitted 10 March, 2014;
originally announced March 2014.
-
A 1D Optomechanical crystal with a complete phononic band gap
Authors:
J. Gomis-Bresco,
D. Navarro-Urrios,
M. Oudich,
S. El-Jallal,
A. Griol,
D. Puerto,
E. Chavez,
Y. Pennec,
B. Djafari-Rouhani,
F. Alzina,
A. Martínez,
C. M. Sotomayor Torres
Abstract:
Recent years have witnessed the boom of cavity optomechanics, which exploits the confinement and coupling of optical and mechanical waves at the nanoscale. Amongst their physical implementations, optomechanical (OM) crystals built on semiconductor slabs enable the integration and manipulation of multiple OM elements in a single chip and provide GHz phonons suitable for coherent phonon manipulation…
▽ More
Recent years have witnessed the boom of cavity optomechanics, which exploits the confinement and coupling of optical and mechanical waves at the nanoscale. Amongst their physical implementations, optomechanical (OM) crystals built on semiconductor slabs enable the integration and manipulation of multiple OM elements in a single chip and provide GHz phonons suitable for coherent phonon manipulation. Different demonstrations of coupling of infrared photons and GHz phonons in cavities created by inserting defects on OM crystals have been performed. However, the considered structures do not show a complete phononic bandgap, which should allow longer dephasing time, since acoustic leakage is minimized. We demonstrate the excitation of acoustic modes in a 1D OM crystal properly designed to display a full phononic bandgap for acoustic modes at 4 GHz. The modes inside the complete bandgap are designed to have mechanical Q factors above 10e8 and invariant to fabrication imperfections.
△ Less
Submitted 17 January, 2014; v1 submitted 8 January, 2014;
originally announced January 2014.
-
A novel high resolution contactless technique for thermal field map** and thermal conductivity determination: Two-Laser Raman Thermometry
Authors:
J. S. Reparaz,
E. Chavez-Angel,
M. R. Wagner,
B. Graczykowski,
J. Gomis-Bresco,
F. Alzina,
C. M. Sotomayor Torres
Abstract:
We present a novel high resolution contactless technique for thermal conductivity determination and thermal field map** based on creating a thermal distribution of phonons using a heating laser, while a second laser probes the local temperature through the spectral position of a Raman active mode. The spatial resolution can be as small as $300$ nm, whereas its temperature accuracy is $\pm 2$ K.…
▽ More
We present a novel high resolution contactless technique for thermal conductivity determination and thermal field map** based on creating a thermal distribution of phonons using a heating laser, while a second laser probes the local temperature through the spectral position of a Raman active mode. The spatial resolution can be as small as $300$ nm, whereas its temperature accuracy is $\pm 2$ K. We validate this technique investigating the thermal properties of three free-standing single crystalline Si membranes with thickness of 250, 1000, and 2000 nm. We show that for 2-dimensional materials such as free-standing membranes or thin films, and for small temperature gradients, the thermal field decays as $T(r) \propto ln(r)$ in the diffusive limit. The case of large temperature gradients within the membranes leads to an exponential decay of the thermal field, $T \propto exp[-A \cdot ln(r)]$. The results demonstrate the full potential of this new contactless method for quantitative determination of thermal properties. The range of materials to which this method is applicable reaches far beyond the here demonstrated case of Si, as the only requirement is the presence of a Raman active mode.
△ Less
Submitted 30 December, 2013;
originally announced December 2013.
-
Ultra-Thin Free-Standing Single Crystalline Silicon Membranes With Strain Control
Authors:
Andrey Shchepetov,
Mika Prunnila,
Francesc Alzina,
Lars Schneider,
John Cuffe,
Hua Jiang,
Esko I. Kauppinen,
Clivia M. Sotomayor Torres,
Jouni Ahopelto
Abstract:
We report on fabrication and characterization of ultra-thin suspended single crystalline flat silicon membranes with thickness down to 6 nm. We have developed a method to control the strain in the membranes by adding a strain compensating frame on the silicon membrane perimeter to avoid buckling of the released membranes. We show that by changing the properties of the frame the strain of the membr…
▽ More
We report on fabrication and characterization of ultra-thin suspended single crystalline flat silicon membranes with thickness down to 6 nm. We have developed a method to control the strain in the membranes by adding a strain compensating frame on the silicon membrane perimeter to avoid buckling of the released membranes. We show that by changing the properties of the frame the strain of the membrane can be tuned in controlled manner. Consequently, both the mechanical properties and the band structure can be engineered and the resulting membranes provide a unique laboratory to study low-dimensional electronic, photonic and phononic phenomena.
△ Less
Submitted 7 March, 2013;
originally announced March 2013.
-
Calculation of the specific heat in ultra-thin free-standing silicon membranes
Authors:
E. Chávez,
J. Cuffe,
F. Alzina,
C. M. Sotomayor Torres
Abstract:
The specific heat of ultra-thin free-standing membranes is calculated using the elastic continuum model. We first obtain the dispersion relations of the discrete set of acoustic modes in the system. The specific heat is then calculated by summing over the discrete out-of-plane wavevector component and integrating over the continuous in-plane wavevector of these waves. In the low-temperature regime…
▽ More
The specific heat of ultra-thin free-standing membranes is calculated using the elastic continuum model. We first obtain the dispersion relations of the discrete set of acoustic modes in the system. The specific heat is then calculated by summing over the discrete out-of-plane wavevector component and integrating over the continuous in-plane wavevector of these waves. In the low-temperature regime (T < 4 K), the flexural polarization is seen to have the highest contribution to the total specific heat. This leads to a linear dependence with temperature, resulting in a larger specific heat for the membrane compared to that of the bulk counterpart
△ Less
Submitted 12 November, 2012;
originally announced November 2012.
-
Phonons in Slow Motion: Dispersion Relations in Ultra-Thin Si Membranes
Authors:
John Cuffe,
Emigdio Chavez,
Andrey Shchepetov,
P-Olivier Chapuis,
El Houssaine El Boudoutie,
Francesc Alzina,
Timothy Kehoe,
Jordi Gomis-Bresco,
Damian Dudek,
Yan Pennec,
Bahram Djafari-Rouhani,
Mika Prunnila,
Jouni Ahopelto,
Clivia. M. Sotomayor Torres
Abstract:
We report the changes in dispersion relations of hypersonic acoustic phonons in free-standing silicon membranes as thin as \sim 8 nm. We observe a reduction of the phase and group velocities of the fundamental flexural mode by more than one order of magnitude compared to bulk values. The modification of the dispersion relation in nanostructures has important consequences for noise control in nano…
▽ More
We report the changes in dispersion relations of hypersonic acoustic phonons in free-standing silicon membranes as thin as \sim 8 nm. We observe a reduction of the phase and group velocities of the fundamental flexural mode by more than one order of magnitude compared to bulk values. The modification of the dispersion relation in nanostructures has important consequences for noise control in nano and micro-electromechanical systems (MEMS/NEMS) as well as opto-mechanical devices.
△ Less
Submitted 11 September, 2012;
originally announced September 2012.
-
Lifetimes of Confined Acoustic Phonons in Ultra-Thin Silicon Membranes
Authors:
J. Cuffe,
O. Ristow,
E. Chávez,
A. Shchepetov,
P-O. Chapuis,
F. Alzina,
M. Hettich,
M. Prunnila,
J. Ahopelto,
T. Dekorsy,
C. M. Sotomayor Torres
Abstract:
We study the relaxation of coherent acoustic phonon modes with frequencies up to 500 GHz in ultra-thin free-standing silicon membranes. Using an ultrafast pump-probe technique of asynchronous optical sampling, we observe that the decay time of the first-order dilatational mode decreases significantly from \sim 4.7 ns to 5 ps with decreasing membrane thickness from \sim 194 to 8 nm. The experimenta…
▽ More
We study the relaxation of coherent acoustic phonon modes with frequencies up to 500 GHz in ultra-thin free-standing silicon membranes. Using an ultrafast pump-probe technique of asynchronous optical sampling, we observe that the decay time of the first-order dilatational mode decreases significantly from \sim 4.7 ns to 5 ps with decreasing membrane thickness from \sim 194 to 8 nm. The experimental results are compared with theories considering both intrinsic phonon-phonon interactions and extrinsic surface roughness scattering including a wavelength-dependent specularity. Our results provide insight to understand some of the limits of nanomechanical resonators and thermal transport in nanostructures.
△ Less
Submitted 10 September, 2012;
originally announced September 2012.
-
Direct Measurement of Room Temperature Non-diffusive Thermal Transport Over Micron Distances in a Silicon Membrane
Authors:
Jeremy A. Johnson,
A. A. Maznev,
John Cuffe,
Jeffrey K. Eliason,
Austin J. Minnich,
Timothy Kehoe,
Clivia M. Sotomayor Torres,
Gang Chen,
Keith A. Nelson
Abstract:
The "textbook" phonon mean free path (MFP) of heat carrying phonons in silicon at room temperature is ~40 nm. However, a large contribution to the thermal conductivity comes from low-frequency phonons with much longer MFPs. We present a simple experiment demonstrating that room temperature thermal transport in Si significantly deviates from the diffusion model already at micron distances. Absorpti…
▽ More
The "textbook" phonon mean free path (MFP) of heat carrying phonons in silicon at room temperature is ~40 nm. However, a large contribution to the thermal conductivity comes from low-frequency phonons with much longer MFPs. We present a simple experiment demonstrating that room temperature thermal transport in Si significantly deviates from the diffusion model already at micron distances. Absorption of crossed laser pulses in a freestanding silicon membrane sets up a sinusoidal temperature profile that is monitored via diffraction of a probe laser beam. By changing the period of the thermal grating we vary the heat transport distance within the range ~1-10 μm. At small distances, we observe a reduction in the effective thermal conductivity indicating a transition from the diffusive to the ballistic transport regime for the low-frequency part of the phonon spectrum.
△ Less
Submitted 20 April, 2012;
originally announced April 2012.
-
Magneto-transport in Disordered Graphene: from Weak Localization to Strong Localization
Authors:
J. Moser,
H. Tao,
S. Roche,
F. Alsina,
C. M. Sotomayor Torres,
A. Bachtold
Abstract:
We present a magneto-transport study of graphene samples into which a mild disorder was introduced by exposure to ozone. Unlike the conductivity of pristine graphene, the conductivity of graphene samples exposed to ozone becomes very sensitive to temperature: it decreases by more than 3 orders of magnitude between 100K and 1K. By varying either an external gate voltage or temperature, we continu…
▽ More
We present a magneto-transport study of graphene samples into which a mild disorder was introduced by exposure to ozone. Unlike the conductivity of pristine graphene, the conductivity of graphene samples exposed to ozone becomes very sensitive to temperature: it decreases by more than 3 orders of magnitude between 100K and 1K. By varying either an external gate voltage or temperature, we continuously tune the transport properties from the weak to the strong localization regime. We show that the transition occurs as the phase coherence length becomes comparable to the localization length. We also highlight the important role of disorder-enhanced electron-electron interaction on the resistivity.
△ Less
Submitted 5 March, 2010;
originally announced March 2010.
-
Periodic thin-film interference filters as one-dimensional photonic crystals
Authors:
Dmitry N. Chigrin,
Clivia M. Sotomayor Torres
Abstract:
We review photonic band gap related properties of a simple periodic system of thin dielectric layers. Properties associated with forbidden and allowed bands of such one-dimensional photonic crystals are presented. A revision of forbidden bands properties leads to an omnidirectional Bragg mirror design. The anisotropy of allowed bands suggests the formation of photon-focusing caustics in one-dime…
▽ More
We review photonic band gap related properties of a simple periodic system of thin dielectric layers. Properties associated with forbidden and allowed bands of such one-dimensional photonic crystals are presented. A revision of forbidden bands properties leads to an omnidirectional Bragg mirror design. The anisotropy of allowed bands suggests the formation of photon-focusing caustics in one-dimensional photonic crystals.
△ Less
Submitted 10 October, 2000; v1 submitted 11 August, 2000;
originally announced August 2000.