-
NiOx passivation in perovskite solar cells: from surface reactivity to device performance
Authors:
John Mohanraj,
Bipasa Samanta,
Osbel Almora,
Renán Escalante,
Lluis F. Marsal,
Sandra Jenatsch,
Arno Gadola,
Beat Ruhstaller,
Juan A. Anta,
Maytal Caspary Toroker,
Selina Olthof
Abstract:
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reporte…
▽ More
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reported. Poorly understood degradation reactions at the interface to the perovskite are seen as cause for the inferior stability and a variety of interface passivation approaches have been shown to be effective in improving the overall solar cell performance. To gain a better understanding of the processes happening at this interface, we systematically passivated possible specific defects on NiOx with three different categories of organic/inorganic compounds. The effects on the NiOx and the perovskite (MAPbI3) were investigated using x-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM) where we find that the structural stability and film formation can be significantly affected. In combination with Density Functional Theory (DFT) calculations, a likely origin of NiOx-perovskite degradation interactions is proposed. The surface passivated NiOx was incorporated into MAPbI3 based PSCs and its influence on overall performance, particularly operational stability, was investigated by current-voltage (J-V), impedance spectroscopy (IS), and open circuit voltage decay (OCVD) measurements. Interestingly, we find that a superior structural stability due to an interface passivation must not relate to high operational stability. The discrepancy comes from the formation of excess ions at the interface which negatively impacts all solar cell parameters.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Transferable classical force field for pure and mixed metal halide perovskites parameterized from first principles
Authors:
Juan Antonio Seijas-Bellido,
Bipasa Samanta,
Karen Valadez-Villalobos,
Juan Jesús Gallardo,
Javier Navas,
Salvador R. G. Balestra,
Rafael María Madero-Castro,
Jose Manuel Vicent-Luna,
Shuxia Tao,
Maytal Caspary Toroker,
Juan Antonio Anta
Abstract:
Many key features in photovoltaic perovskites occur in relatively long time scales and involve mixed compositions. This requires realistic but also numerically simple models. In this work we present a transferable classical force field to describe the mixed hybrid perovskite MA$_x$FA$_{1-x}$Pb(Br$_y$I$_{1-y}$)$_3$ for variable composition ($\forall x,y \in [0,1]$). The model includes Lennard-Jones…
▽ More
Many key features in photovoltaic perovskites occur in relatively long time scales and involve mixed compositions. This requires realistic but also numerically simple models. In this work we present a transferable classical force field to describe the mixed hybrid perovskite MA$_x$FA$_{1-x}$Pb(Br$_y$I$_{1-y}$)$_3$ for variable composition ($\forall x,y \in [0,1]$). The model includes Lennard-Jones and Buckingham potentials to describe the interactions between the atoms of the inorganic lattice and the organic molecule, and the AMBER model to describe intramolecular atomic interactions. Most of the parameters of the force field have been obtained by means of a genetic algorithm previously developed to parameterize the CsPb(Br$_x$I$_{1-x}$)$_3$ perovskite. The algorithm finds the best parameter set that simultaneously fits the DFT energies obtained for several crystalline structures with moderate degrees of distortion with respect to the equilibrium configuration. The resulting model reproduces correctly the XRD patterns, the expansion of the lattice upon I/Br substitution and the thermal expansion coefficients. We use the model to run classical molecular dynamics simulations with up to 8600 atoms and simulation times of up to 40~ns. From the simulations we have extracted the ion diffusion coefficient of the pure and mixed perovskites, presenting for the first time these values obtained by a fully dynamical method using a transferable model fitted to first principles calculations. The values here reported can be considered as the theoretical upper limit for ion migration dynamics induced by halide vacancies in photovoltaic perovskite devices under operational conditions.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
The rust challenge -- On the correlations between electronic structure, excited state dynamics and photoelectrochemical performance of hematite photoanodes for solar water splitting
Authors:
Daniel A. Grave,
Natav Yatom,
David S. Ellis,
Maytal Caspary Toroker,
Avner Rothschild
Abstract:
In recent years, hematite potential as a photoanode material for solar hydrogen production has ignited a renewed interest in its physical and interfacial properties, which continues to be an active field of research. Research on hematite photoanodes provides new insights on the correlations between electronic structure, transport properties, excited state dynamics and charge transfer phenomena, an…
▽ More
In recent years, hematite potential as a photoanode material for solar hydrogen production has ignited a renewed interest in its physical and interfacial properties, which continues to be an active field of research. Research on hematite photoanodes provides new insights on the correlations between electronic structure, transport properties, excited state dynamics and charge transfer phenomena, and expands our knowledge on solar cell materials into correlated electron systems. This research news article presents a snapshot of selected theoretical and experimental developments linking the electronic structure to the photoelectrochemical performance, with particular focus on optoelectronic properties and charge carrier dynamics.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Strain Controlling Catalytic Efficiency of Water Oxidation for Ni1-xFexOOH alloy
Authors:
Ester Korkus Hamal,
Maytal Caspary Toroker
Abstract:
A catalyst surface may be exposed to strain due to application of load or interfacing with a substrate with large lattice mismatch. In order to test the effect of strain on catalytic efficiency, we use Density Functional Theory +U (DFT+U) to model water oxidation on expanded and contracted surfaces of the Ni1-xFexOOH alloy, one of the best known catalysts for water splitting. We find that a low am…
▽ More
A catalyst surface may be exposed to strain due to application of load or interfacing with a substrate with large lattice mismatch. In order to test the effect of strain on catalytic efficiency, we use Density Functional Theory +U (DFT+U) to model water oxidation on expanded and contracted surfaces of the Ni1-xFexOOH alloy, one of the best known catalysts for water splitting. We find that a low amount of iron content has a similar effect as of applying compressive strain. Due to high oxidation state of Fe4+ at the active site, the Fe-O bond is shorter than in pure FeOOH, which is beneficial for extracting electrons from states delocalized on Fe and Ni atoms. At 33% of Fe content the efficiency is even better since Fe3+ is at the active site and can easily change oxidation state during the reaction. However, the efficiency drops at higher iron percentages since the surface is unstable and may form FeOOH aggregates. We find that the best performance is obtained at 33% iron content and 5% expansion. Therefore, in addition to changing iron content, strain can also be used as a control handle for improving water splitting catalysis.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.