Showing 1–6 of 6 results for author: Tomko, J A

Ultrafast evanescent heat transfer across solid interfaces via hyperbolic phonon polaritons in hexagonal boron nitride

Authors: William Hutchins, John A. Tomko, Dan M. Hirt, Saman Zare, Joseph R. Matson, Katja Diaz-Granados, Mingze He, Thomas Pfeifer, Jiahan Li, James Edgar, Jon-Paul Maria, Joshua D. Caldwell, Patrick E. Hopkins

Abstract: The efficiency of phonon-mediated heat transport is limited by the intrinsic atomistic properties of materials, seemingly providing an upper limit to heat transfer in materials and across their interfaces. The typical speeds of conductive transport, which are inherently limited by the chemical bonds and atomic masses, dictate how quickly heat will move in solids. Given that phonon-polaritons, or c… ▽ More The efficiency of phonon-mediated heat transport is limited by the intrinsic atomistic properties of materials, seemingly providing an upper limit to heat transfer in materials and across their interfaces. The typical speeds of conductive transport, which are inherently limited by the chemical bonds and atomic masses, dictate how quickly heat will move in solids. Given that phonon-polaritons, or coupled phonon-photon modes, can propagate at speeds approaching 1 percent of the speed of light - orders of magnitude faster than transport within a pure diffusive phonon conductor - we demonstrate that volume-confined, hyperbolic phonon-polariton(HPhP) modes supported by many biaxial polar crystals can couple energy across solid-solid interfaces at an order of magnitude higher rates than phonon-phonon conduction alone. Using pump-probe thermoreflectance with a mid-infrared, tunable, probe pulse with sub-picosecond resolution, we demonstrate remote and spectrally selective excitation of the HPhP modes in hexagonal boron nitride in response to radiative heating from a thermally emitting gold source. Our work demonstrates a new avenue for interfacial heat transfer based on broadband radiative coupling from a hot spot in a gold film to hBN HPhPs, independent of the broad spectral mismatch between the pump(visible) and probe(mid-IR) pulses employed. This methodology can be used to bypass the intrinsically limiting phonon-phonon conductive pathway, thus providing an alternative means of heat transfer across interfaces. Further, our time-resolved measurements of the temperature changes of the HPhP modes in hBN show that through polaritonic coupling, a material can transfer heat across and away from an interface at rates orders of magnitude faster than diffusive phonon speeds intrinsic to the material, thus demonstrating a pronounced thermal transport enhancement in hBN via phonon-polariton coupling. △ Less

Submitted 20 February, 2024; v1 submitted 17 January, 2024; originally announced January 2024.

Ruddlesden-Popper chalcogenides push the limit of mechanical stiffness and glass-like thermal conductivity in crystals

Authors: Md Shafkat Bin Hoque, Eric R. Hoglund, Boyang Zhao, De-Liang Bao, Hao Zhou, Sandip Thakur, Eric Osei-Agyemang, Khalid Hattar, Ethan A. Scott, Mythili Surendran, John A. Tomko, John T. Gaskins, Kiumars Aryana, Sara Makarem, Ganesh Balasubramanian, Ashutosh Giri, Tianli Feng, Jordan A. Hachtel, Jayakanth Ravichandran, Sokrates T. Pantelides, Patrick E. Hopkins

Abstract: Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded… ▽ More Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded materials in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline, BaZrS3-derived, Ruddlesden-Popper phases Ban+1ZrnS3n+1, n = 2, 3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of "mechanically stiff phonon glasses". △ Less

Submitted 5 December, 2023; originally announced December 2023.

Orientation Controlled Anisotropy in Single Crystals of Quasi-1D BaTiS3

Authors: Boyang Zhao, Md Shafkat Bin Hoque, Gwan Yeong Jung, Hongyan Mei, Shantanu Singh, Guodong Ren, Milena Milich, Qinai Zhao, Nan Wang, Huandong Chen, Shanyuan Niu, Sang-Jun Lee, Cheng-Tai Kuo, Jun-Sik Lee, John A. Tomko, Han Wang, Mikhail Kats, Rohan Mishra, Patrick E Hopkins, J. Ravichandran

Abstract: Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is nec… ▽ More Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is necessary to fully characterize the optical, thermal, and electronic anisotropy of BTS. To this end, BTS crystals with different orientations (aand c-axis orientations) were grown by chemical vapor transport. X-ray absorption spectroscopy (XAS) was used to characterize the local structure and electronic anisotropy of BTS. Fourier transform infrared (FTIR) reflection/transmission spectra show a large inplane optical anisotropy in the a-oriented crystals, while the c-axis oriented crystals were nearly isotropic in-plane. BTS platelet crystals are promising uniaxial materials for IR optics with their optic axis parallel to the c-axis. The thermal conductivity measurements revealed a thermal anisotropy of ~4.5 between the c- and a-axis. Time-domain Brillouin scattering showed that the longitudinal sound speed along the two axes is nearly the same suggesting that the thermal anisotropy is a result of different phonon scattering rates. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Plasma-induced surface cooling

Authors: John A. Tomko, Michael J. Johnson, David R. Boris, Tzvetelina B. Petrova, Scott G. Walton, Patrick E. Hopkins

Abstract: Here we show that, despite a massive incident flux of energetic species, plasmas can induce transient cooling of a material surface. Using time-resolved optical thermometry in-situ with this plasma excitation, we reveal the novel underlying physics that drive this `plasma cooling' that is driven by the diverse chemical and energetic species that comprise this fourth state of matter. We show that t… ▽ More Here we show that, despite a massive incident flux of energetic species, plasmas can induce transient cooling of a material surface. Using time-resolved optical thermometry in-situ with this plasma excitation, we reveal the novel underlying physics that drive this `plasma cooling' that is driven by the diverse chemical and energetic species that comprise this fourth state of matter. We show that the photons and massive particles in the plasma impart energy to different chemical species on a surface, leading to local and temporally changing temperatures that lead to both increases and decreases in temperature on the surface of the sample, even though energy is being imparted to the material. This balance comes from the interplay between chemical reactions, momentum transfer, and energy exchange which occur on different time scales over the course of picoseconds to milliseconds. Thus, we show that through energetically exciting a material with a plasma, we can induce cooling, which can lead to revolutionary advances in refrigeration and thermal mitigation with this new process that is not inhibited by the same limitations in the current state-of-the-art systems. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Nanoscale Phonon Spectroscopy Reveals Emergent Interface Vibrational Structure of Superlattices

Authors: Eric R. Hoglund, De-Liang Bao, Andrew O'Hara, Sara Makarem, Zachary T. Piontkowski, Joseph R. Matson, Ajay K. Yadav, Ryan C. Haisimaier, Roman Engel-Herbert, Jon F. Ihlefeld, Jayakanth Ravichandran, Ramamoorthy Ramesh, Joshua D. Caldwell, Thomas E. Beechem, John A. Tomko, Jordan A. Hachtel, Sokrates T. Pantelides, Patrick E. Hopkins, James M. Howe

Abstract: As the length-scales of materials decrease, heterogeneities associated with interfaces approach the importance of the surrounding materials. Emergent electronic and magnetic interface properties in superlattices have been studied extensively by both experiments and theory. $^{1-6}$ However, the presence of interfacial vibrations that impact phonon-mediated responses, like thermal conductivity… ▽ More As the length-scales of materials decrease, heterogeneities associated with interfaces approach the importance of the surrounding materials. Emergent electronic and magnetic interface properties in superlattices have been studied extensively by both experiments and theory. $^{1-6}$ However, the presence of interfacial vibrations that impact phonon-mediated responses, like thermal conductivity $^{7,8}$, has only been inferred in experiments indirectly. While it is accepted that intrinsic phonons change near boundaries $^{9,10}$, the physical mechanisms and length-scales through which interfacial effects influence materials remain unclear. Herein, we demonstrate the localized vibrational response associated with the interfaces in SrTiO$_3$-CaTiO$_3$ superlattices by combining advanced scanning transmission electron microscopy imaging and spectroscopy and density-functional-theory calculations. Symmetries atypical of either constituent material are observed within a few atomic planes near the interface. The local symmetries create local phonon modes that determine the global response of the superlattice once the spacing of the interfaces approaches the phonon spatial extent. The results provide direct visualization and quantification, illustrating the progression of the local symmetries and interface vibrations as they come to determine the vibrational response of an entire superlattice; stated differently, the progression from a material with interfaces, to a material dominated by interfaces, to a material of interfaces as the period decreases. Direct observation of such local atomic and vibrational phenomena demonstrates that their spatial extent needs to be quantified to understand macroscopic behavior. Tailoring interfaces, and knowing their local vibrational response, provides a means of pursuing designer solids having emergent infrared and thermal responses. △ Less

Submitted 4 October, 2021; v1 submitted 20 May, 2021; originally announced May 2021.

Comments: 38 pages, 3 figures, 10 supplemental figures

Journal ref: Nature 601, 556 (2022)

Long-lived modulation of plasmonic absorption by ballistic thermal injection

Authors: John A. Tomko, Evan L. Runnerstrom, Yi-Siang Wang, Joshua R. Nolen, David H. Olson, Kyle P. Kelley, Angela Cleri, Josh Nordlander, Joshua D. Caldwell, Oleg V. Prezhdo, Jon-Paul Maria, Patrick E. Hopkins

Abstract: Energy and charge transfer across metal-semiconductor interfaces are the fundamental driving forces for a broad range of applications, such as computing, energy harvesting, and photodetection. However, the exact roles and physical separation of these two phenomena remains unclear, particularly in plasmonically-excited systems or cases of strong nonequilibrium. We report on a series of ultrafast pl… ▽ More Energy and charge transfer across metal-semiconductor interfaces are the fundamental driving forces for a broad range of applications, such as computing, energy harvesting, and photodetection. However, the exact roles and physical separation of these two phenomena remains unclear, particularly in plasmonically-excited systems or cases of strong nonequilibrium. We report on a series of ultrafast plasmonic measurements that provide a direct measure of electronic distributions, both spatially and temporally, following optical excitation of a metal-semiconductor heterostructure. For the first time, we explicitly show that in cases of strong non-equilibrium, a novel energy transduction mechanism arises at the metal/semiconductor interface. We find that hot electrons in the metal contact transfer their energy to pre-existing electrons in the semiconductor, without transfer of charge. These experimental results findings are well-supported by both rigorous multilayer optical modeling and first-principle, ab initio calculations. △ Less

Submitted 20 May, 2020; originally announced May 2020.