-
Tuneable optical gain and broadband lasing driven in electrospun polymer fibers by high dye concentration
Authors:
Giovanni Morello,
Maria Moffa,
Martina Montinaro,
Annachiara Albanese,
Karolis Kazlauskas,
Saulius Jursenas,
Ausra Tomkeviciene,
Juozas V. Grazulevicius,
Andrea Camposeo,
Dario Pisignano
Abstract:
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectru…
▽ More
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission properties and the specific material architecture made of either aligned or disordered fibers. Enhanced performance is found in aligned fibers, whose gain spectrum can be finely tuned by varying the dye concentration. Instead, randomly oriented fibers show a manifold spectral line narrowing, resulting in sharp laser peaks superimposed on top of a broad emission band, ascribable to random lasing. In these systems, the increase of the dye content turns out to be effective for both decreasing the lasing threshold by about a factor 6 and for varying the laser emission wavelength. These results make these arrays and disordered architectures of fibers valuable active media for variable-gain, broadband lasing, which is remarkably important in optical sensing and tunable microlaser devices.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Accurate wavelength tracking by exciton spin mixing
Authors:
Anton Kirch,
Toni Bärschneider,
Tim Achenbach,
Felix Fries,
Max Gmelch,
Robert Werberger,
Chris Guhrenz,
Aušra Tomkevičienė,
Johannes Benduhn,
Alexander Eychmüller,
Karl Leo,
Sebastian Reineke
Abstract:
Wavelength discriminating systems typically consist of heavy benchtop-based instruments, comprising diffractive optics, moving parts, and adjacent detectors. For simple wavelengths measurements, such as lab-on-chip light source calibration or laser wavelength tracking, which do not require polychromatic analysis and cannot handle bulky spectroscopy instruments, light-weight, easy-to-process, and f…
▽ More
Wavelength discriminating systems typically consist of heavy benchtop-based instruments, comprising diffractive optics, moving parts, and adjacent detectors. For simple wavelengths measurements, such as lab-on-chip light source calibration or laser wavelength tracking, which do not require polychromatic analysis and cannot handle bulky spectroscopy instruments, light-weight, easy-to-process, and flexible single-pixel devices are attracting increasing attention. Here, we propose a device for wavelength tracking with room-temperature phosphorescence at the heart of its functionality that demonstrates a resolution down to one nanometer and below. It is solution-processed from a single host-guest system comprising organic room-temperature phosphors and colloidal quantum dots. The share of excited triplet states within the photoluminescent layer is dependent on the excitation wavelength and determines the afterglow intensity of the film, which is tracked by a simple photodetector. Finally, an all-organic thin-film wavelength sensor and two applications are demonstrated where our novel measurement concept successfully replaces a full spectrometer.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
High-speed and continuous-wave programmable luminescent tags
Authors:
Max Gmelch,
Tim Achenbach,
Ausra Tomkeviciene,
Sebastian Reineke
Abstract:
Most materials recently developed for room temperature phosphorescence (RTP) lack of practical relevance due to their inconvenient crystalline morphology. Using amorphous material systems instead, programmable luminescent tags (PLTs) based on organic biluminescent emitter molecules with easy processing and smooth sample shapes were presented recently. Here, the effective quenching of the emitters…
▽ More
Most materials recently developed for room temperature phosphorescence (RTP) lack of practical relevance due to their inconvenient crystalline morphology. Using amorphous material systems instead, programmable luminescent tags (PLTs) based on organic biluminescent emitter molecules with easy processing and smooth sample shapes were presented recently. Here, the effective quenching of the emitters RTP by molecular oxygen (O2) and the consumption of the excited singlet O2 through a chemical reaction represent the central features. With customized activation schemes, high resolution content can be written and later erased multiple times into such films, providing a versatile yet simple photonic platform for information storage. However, two important limitations remain: (i) The immutable fluorescence of the emitters outshines the phosphorescent patterns by roughly one order of magnitude, allowing read-out of the PLTs only after the excitation source is turned off. (ii) The programming of these systems is a rather slow process, where lowest reported activation times are still > 8 s. Here, a material-focused approach to PLTs with fast activation times of 120 +/- 20 ms and high-contrast under continuous-wave (cw) illumination is demonstrated, leading to accelerated programming on industry relevant time scales and a simplified readout process both by eye and low cost cameras.
△ Less
Submitted 20 April, 2021; v1 submitted 30 January, 2020;
originally announced January 2020.
-
Diverse regimes of mode intensity correlation in nanofiber random lasers through nanoparticle do**
Authors:
Martina Montinaro,
Vincenzo Resta,
Andrea Camposeo,
Maria Moffa,
Giovanni Morello,
Luana Persano,
Karolis Kazlauskas,
Saulius Jursenas,
Ausra Tomkeviciene,
Juozas V. Grazulevicius,
Dario Pisignano
Abstract:
Random lasers are based on disordered materials with optical gain. These devices can exhibit either intensity or resonant feedback, relying on diffusive or interference behaviour of light, respectively, which leads to either coupling or independent operation of lasing modes. We study for the first time these regimes in complex, solid-state nanostructured materials. The number of lasing modes and t…
▽ More
Random lasers are based on disordered materials with optical gain. These devices can exhibit either intensity or resonant feedback, relying on diffusive or interference behaviour of light, respectively, which leads to either coupling or independent operation of lasing modes. We study for the first time these regimes in complex, solid-state nanostructured materials. The number of lasing modes and their intensity correlation features are found to be tailorable in random lasers made of light-emitting, electrospun polymer fibers upon nanoparticle do**. By material engineering, directional waveguiding along the length of fibers is found to be relevant to enhance mode correlation in both intensity feedback and resonant feedback random lasing. The here reported findings can be used to establish new design rules for tuning the emission of nano-lasers and correlation properties by means of the compositional and morphological properties of complex nanostructured materials.
△ Less
Submitted 27 December, 2017;
originally announced December 2017.
-
Nanoparticle-doped electrospun fiber random lasers with spatially extended light modes
Authors:
Vincenzo Resta,
Andrea Camposeo,
Martina Montinaro,
Maria Moffa,
Karolis Kazlauska,
Saulius Jursenas,
Ausra Tomkeviciene,
Juozas V. Grazulevicius,
Dario Pisignano
Abstract:
Complex assemblies of light-emitting polymer nanofibers with molecular materials exhibiting optical gain can lead to important advance to amorphous photonics and to random laser science and devices. In disordered mats of nanofibers, multiple scattering and waveguiding might interplay to determine localization or spreading of optical modes as well as correlation effects. Here we study electrospun f…
▽ More
Complex assemblies of light-emitting polymer nanofibers with molecular materials exhibiting optical gain can lead to important advance to amorphous photonics and to random laser science and devices. In disordered mats of nanofibers, multiple scattering and waveguiding might interplay to determine localization or spreading of optical modes as well as correlation effects. Here we study electrospun fibers embedding a lasing fluorene-carbazole-fluorene molecule and doped with titania nanoparticles, which exhibit random lasing with sub-nm spectral width and threshold of about 9 mJ cm^-2 for the absorbed excitation fluence. We focus on the spatial and spectral behavior of optical modes in the disordered and non-woven networks, finding evidence for the presence of modes with very large spatial extent, up to the 100 micrometer-scale. These findings suggest emission coupling into integrated nanofiber transmission channels as effective mechanism for enhancing spectral selectivity in random lasers and correlations of light modes in the complex and disordered material.
△ Less
Submitted 2 October, 2017;
originally announced October 2017.
