-
A phase defect framework for the analysis of cardiac arrhythmia patterns
Authors:
Louise Arno,
Jan Quan,
Nhan T. Nguyen,
Maarten Vanmarcke,
Elena G. Tolkacheva,
Hans Dierckx
Abstract:
During cardiac arrhythmias, dynamical patterns of electrical activation form and evolve, which are of interest to understand and cure heart rhythm disorders. The analysis of these patterns is commonly performed by calculating the local activation phase and searching for phase singularities (PSs), i.e. points around which all phases are present. Here we propose an alternative framework, which focus…
▽ More
During cardiac arrhythmias, dynamical patterns of electrical activation form and evolve, which are of interest to understand and cure heart rhythm disorders. The analysis of these patterns is commonly performed by calculating the local activation phase and searching for phase singularities (PSs), i.e. points around which all phases are present. Here we propose an alternative framework, which focuses on phase defect lines (PDLs) and surfaces (PDSs) as more general mechanisms, which include PSs as a specific case. The proposed framework enables two conceptual unifications: between the local activation time and phase description, and between conduction block lines and the central regions of linear-core rotors. A simple PDL detection method is proposed and applied to data from simulations and optical map** experiments. Our analysis of ventricular tachycardia in rabbit hearts $(n=6)$ shows that nearly all detected PSs were found on PDLs, but the PDLs had a significantly longer lifespan than the detected PSs. Since the proposed framework revisits basic building blocks of cardiac activation patterns, it can become a useful tool for further theory development and experimental analysis.
△ Less
Submitted 8 September, 2021; v1 submitted 1 January, 2021;
originally announced January 2021.
-
A frequency and sensitivity tunable microresonator array for high-speed quantum processor readout
Authors:
J. D. Whittaker,
L. J. Swenson,
M. H. Volkmann,
P. Spear,
F. Altomare,
A. J. Berkley,
B. Bumble,
P. Bunyk,
P. K. Day,
B. H. Eom,
R. Harris,
J. P. Hilton,
E. Hoskinson,
M. W. Johnson,
A. Kleinsasser,
E. Ladizinsky,
T. Lanting,
T. Oh,
I. Perminov,
E. Tolkacheva,
J. Yao
Abstract:
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector ba…
▽ More
Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector bandwidth. For all existing designs, fluctuations in fabrication tolerances result in a non-uniform shift in resonance frequency and sensitivity, which ultimately limits the efficiency of band-width utilization. Here we present the design, implementation, and initial characterization of a superconducting microresonator readout integrating two tunable inductances per detector. We demonstrate that these tuning elements provide independent control of both the detector frequency and sensitivity, allowing us to maximize the transmission line bandwidth utilization. Finally we discuss the integration of these detectors in a multilayer fabrication stack for high-speed readout of the D-Wave quantum processor, highlighting the use of control and routing circuitry composed of single flux-quantum loops to minimize the number of control wires at the lowest temperature stage.
△ Less
Submitted 22 April, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
Architectural considerations in the design of a superconducting quantum annealing processor
Authors:
P. I. Bunyk,
E. Hoskinson,
M. W. Johnson,
E. Tolkacheva,
F. Altomare,
A. J. Berkley,
R. Harris,
J. P. Hilton,
T. Lanting,
J. Whittaker
Abstract:
We have developed a quantum annealing processor, based on an array of tunably coupled rf-SQUID flux qubits, fabricated in a superconducting integrated circuit process [1]. Implementing this type of processor at a scale of 512 qubits and 1472 programmable inter-qubit couplers and operating at ~ 20 mK has required attention to a number of considerations that one may ignore at the smaller scale of a…
▽ More
We have developed a quantum annealing processor, based on an array of tunably coupled rf-SQUID flux qubits, fabricated in a superconducting integrated circuit process [1]. Implementing this type of processor at a scale of 512 qubits and 1472 programmable inter-qubit couplers and operating at ~ 20 mK has required attention to a number of considerations that one may ignore at the smaller scale of a few dozen or so devices. Here we discuss some of these considerations, and the delicate balance necessary for the construction of a practical processor that respects the demanding physical requirements imposed by a quantum algorithm. In particular we will review some of the design trade-offs at play in the floor-planning of the physical layout, driven by the desire to have an algorithmically useful set of inter-qubit couplers, and the simultaneous need to embed programmable control circuitry into the processor fabric. In this context we have developed a new ultra-low power embedded superconducting digital-to-analog flux converters (DACs) used to program the processor with zero static power dissipation, optimized to achieve maximum flux storage density per unit area. The 512 single-stage, 3520 two-stage, and 512 three-stage flux-DACs are controlled with an XYZ addressing scheme requiring 56 wires. Our estimate of on-chip dissipated energy for worst-case reprogramming of the whole processor is ~ 65 fJ. Several chips based on this architecture have been fabricated and operated successfully at our facility, as well as two outside facilities (see for example [2]).
△ Less
Submitted 21 January, 2014;
originally announced January 2014.
-
Entanglement in a quantum annealing processor
Authors:
T. Lanting,
A. J. Przybysz,
A. Yu. Smirnov,
F. M. Spedalieri,
M. H. Amin,
A. J. Berkley,
R. Harris,
F. Altomare,
S. Boixo,
P. Bunyk,
N. Dickson,
C. Enderud,
J. P. Hilton,
E. Hoskinson,
M. W. Johnson,
E. Ladizinsky,
N. Ladizinsky,
R. Neufeld,
T. Oh,
I. Perminov,
C. Rich,
M. C. Thom,
E. Tolkacheva,
S. Uchaikin,
A. B. Wilson
, et al. (1 additional authors not shown)
Abstract:
Entanglement lies at the core of quantum algorithms designed to solve problems that are intractable by classical approaches. One such algorithm, quantum annealing (QA), provides a promising path to a practical quantum processor. We have built a series of scalable QA processors consisting of networks of manufactured interacting spins (qubits). Here, we use qubit tunneling spectroscopy to measure th…
▽ More
Entanglement lies at the core of quantum algorithms designed to solve problems that are intractable by classical approaches. One such algorithm, quantum annealing (QA), provides a promising path to a practical quantum processor. We have built a series of scalable QA processors consisting of networks of manufactured interacting spins (qubits). Here, we use qubit tunneling spectroscopy to measure the energy eigenspectrum of two- and eight-qubit systems within one such processor, demonstrating quantum coherence in these systems. We present experimental evidence that, during a critical portion of QA, the qubits become entangled and that entanglement persists even as these systems reach equilibrium with a thermal environment. Our results provide an encouraging sign that QA is a viable technology for large-scale quantum computing.
△ Less
Submitted 15 January, 2014;
originally announced January 2014.
-
Tunneling spectroscopy using a probe qubit
Authors:
A. J. Berkley,
A. J. Przybysz,
T. Lanting,
R. Harris,
N. Dickson,
F. Altomare,
M. H. Amin,
P. Bunyk,
C. Enderud,
E. Hoskinson,
M. W. Johnson,
E. Ladizinsky,
R. Neufeld,
C. Rich,
A. Yu. Smirnov,
E. Tolkacheva,
S. Uchaikin,
A. B. Wilson
Abstract:
We describe a quantum tunneling spectroscopy technique that requires only low bandwidth control. The method involves coupling a probe qubit to the system under study to create a localized probe state. The energy of the probe state is then scanned with respect to the unperturbed energy levels of the probed system. Incoherent tunneling transitions that flip the state of the probe qubit occur when th…
▽ More
We describe a quantum tunneling spectroscopy technique that requires only low bandwidth control. The method involves coupling a probe qubit to the system under study to create a localized probe state. The energy of the probe state is then scanned with respect to the unperturbed energy levels of the probed system. Incoherent tunneling transitions that flip the state of the probe qubit occur when the energy bias of the probe is close to an eigenenergy of the probed system. Monitoring these transitions allows the reconstruction of the probed system eigenspectrum. We demonstrate this method on an rf SQUID flux qubit.
△ Less
Submitted 3 January, 2013; v1 submitted 23 October, 2012;
originally announced October 2012.
-
Probing High Frequency Noise with Macroscopic Resonant Tunneling
Authors:
T. Lanting,
M. H. S. Amin,
M. W. Johnson,
F. Altomare,
A. J. Berkley,
S. Gildert,
R. Harris,
J. Johansson,
P. Bunyk,
E. Ladizinsky,
E. Tolkacheva,
D. V. Averin
Abstract:
We have developed a method for extracting the high-frequency noise spectral density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT) rate measurements. The extracted noise spectral density is consistent with that of an ohmic environment up to frequencies ~ 4 GHz. We have also derived an expression for the MRT lineshape expected for a noise spectral density consisting of such a b…
▽ More
We have developed a method for extracting the high-frequency noise spectral density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT) rate measurements. The extracted noise spectral density is consistent with that of an ohmic environment up to frequencies ~ 4 GHz. We have also derived an expression for the MRT lineshape expected for a noise spectral density consisting of such a broadband ohmic component and an additional strongly peaked low-frequency component. This hybrid model provides an excellent fit to experimental data across a range of tunneling amplitudes and temperatures.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
Observation of Co-tunneling in Pairs of Coupled Flux Qubits
Authors:
T. Lanting,
R. Harris,
J. Johansson,
M. H. S. Amin,
A. J. Berkley,
S. Gildert,
M. W. Johnson,
P. Bunyk,
E. Tolkacheva,
E. Ladizinsky,
N. Ladizinsky,
T. Oh,
I. Perminov,
E. M. Chapple,
C. Enderud,
C. Rich,
B. Wilson,
M. C. Thom,
S. Uchaikin,
G. Rose
Abstract:
We report measurements of macroscopic resonant tunneling between the two lowest energy states of a pair of magnetically coupled rf-SQUID flux qubits. This technique provides a direct means of observing two-qubit dynamics and a probe of the environment coupled to the pair of qubits. Measurements of the tunneling rate as a function of qubit flux bias show a Gaussian line shape that is well matched t…
▽ More
We report measurements of macroscopic resonant tunneling between the two lowest energy states of a pair of magnetically coupled rf-SQUID flux qubits. This technique provides a direct means of observing two-qubit dynamics and a probe of the environment coupled to the pair of qubits. Measurements of the tunneling rate as a function of qubit flux bias show a Gaussian line shape that is well matched to theoretical predictions. Moreover, the peak widths indicate that each qubit is coupled to a local environment whose fluctuations are uncorrelated with that of the other qubit.
△ Less
Submitted 31 May, 2010;
originally announced June 2010.
-
Experimental Investigation of an Eight Qubit Unit Cell in a Superconducting Optimization Processor
Authors:
R. Harris,
M. W. Johnson,
T. Lanting,
A. J. Berkley,
J. Johansson,
P. Bunyk,
E. Tolkacheva,
E. Ladizinsky,
N. Ladizinsky,
T. Oh,
F. Cioata,
I. Perminov,
P. Spear,
C. Enderud,
C. Rich,
S. Uchaikin,
M. C. Thom,
E. M. Chapple,
J. Wang,
B. Wilson,
M. H. S. Amin,
N. Dickson,
K. Karimi,
B. Macready,
C. J. S. Truncik
, et al. (1 additional authors not shown)
Abstract:
A superconducting chip containing a regular array of flux qubits, tunable interqubit inductive couplers, an XY-addressable readout system, on-chip programmable magnetic memory, and a sparse network of analog control lines has been studied. The architecture of the chip and the infrastructure used to control it were designed to facilitate the implementation of an adiabatic quantum optimization algor…
▽ More
A superconducting chip containing a regular array of flux qubits, tunable interqubit inductive couplers, an XY-addressable readout system, on-chip programmable magnetic memory, and a sparse network of analog control lines has been studied. The architecture of the chip and the infrastructure used to control it were designed to facilitate the implementation of an adiabatic quantum optimization algorithm. The performance of an eight-qubit unit cell on this chip has been characterized by measuring its success in solving a large set of random Ising spin glass problem instances as a function of temperature. The experimental data are consistent with the predictions of a quantum mechanical model of an eight-qubit system coupled to a thermal environment. These results highlight many of the key practical challenges that we have overcome and those that lie ahead in the quest to realize a functional large scale adiabatic quantum information processor.
△ Less
Submitted 28 June, 2010; v1 submitted 9 April, 2010;
originally announced April 2010.
-
Experimental Demonstration of a Robust and Scalable Flux Qubit
Authors:
R. Harris,
J. Johansson,
A. J. Berkley,
M. W. Johnson,
T. Lanting,
Siyuan Han,
P. Bunyk,
E. Ladizinsky,
T. Oh,
I. Perminov,
E. Tolkacheva,
S. Uchaikin,
E. Chapple,
C. Enderud,
C. Rich,
M. Thom,
J. Wang,
B. Wilson,
G. Rose
Abstract:
A novel rf-SQUID flux qubit that is robust against fabrication variations in Josephson junction critical currents and device inductance has been implemented. Measurements of the persistent current and of the tunneling energy between the two lowest lying states, both in the coherent and incoherent regime, are presented. These experimental results are shown to be in agreement with predictions of a…
▽ More
A novel rf-SQUID flux qubit that is robust against fabrication variations in Josephson junction critical currents and device inductance has been implemented. Measurements of the persistent current and of the tunneling energy between the two lowest lying states, both in the coherent and incoherent regime, are presented. These experimental results are shown to be in agreement with predictions of a quantum mechanical Hamiltonian whose parameters were independently calibrated, thus justifying the identification of this device as a flux qubit. In addition, measurements of the flux and critical current noise spectral densities are presented that indicate that these devices with Nb wiring are comparable to the best Al wiring rf-SQUIDs reported in the literature thusfar, with a $1/f$ flux noise spectral density at $1 $Hz of $1.3^{+0.7}_{-0.5} μΦ_0/\sqrt{\text{Hz}}$. An explicit formula for converting the observed flux noise spectral density into a free induction decay time for a flux qubit biased to its optimal point and operated in the energy eigenbasis is presented.
△ Less
Submitted 23 September, 2009;
originally announced September 2009.
-
A scalable control system for a superconducting adiabatic quantum optimization processor
Authors:
M. W. Johnson,
P. Bunyk,
F. Maibaum,
E. Tolkacheva,
A. J. Berkley,
E. M. Chapple,
R. Harris,
J. Johansson,
T. Lanting,
I. Perminov,
E. Ladizinsky,
T. Oh,
G. Rose
Abstract:
We have designed, fabricated and operated a scalable system for applying independently programmable time-independent, and limited time-dependent flux biases to control superconducting devices in an integrated circuit. Here we report on the operation of a system designed to supply 64 flux biases to devices in a circuit designed to be a unit cell for a superconducting adiabatic quantum optimizatio…
▽ More
We have designed, fabricated and operated a scalable system for applying independently programmable time-independent, and limited time-dependent flux biases to control superconducting devices in an integrated circuit. Here we report on the operation of a system designed to supply 64 flux biases to devices in a circuit designed to be a unit cell for a superconducting adiabatic quantum optimization system. The system requires six digital address lines, two power lines, and a handful of global analog lines.
△ Less
Submitted 24 March, 2010; v1 submitted 22 July, 2009;
originally announced July 2009.
-
A scalable readout system for a superconducting adiabatic quantum optimization system
Authors:
A. J. Berkley,
M. W. Johnson,
P. Bunyk,
R. Harris,
J. Johansson,
T. Lanting,
E. Ladizinsky,
E. Tolkacheva,
M. H. S. Amin,
G. Rose
Abstract:
We have designed, fabricated and tested an XY-addressable readout system that is specifically tailored for the reading of superconducting flux qubits in an integrated circuit that could enable adiabatic quantum optimization. In such a system, the flux qubits only need to be read at the end of an adiabatic evolution when quantum mechanical tunneling has been suppressed, thus simplifying many aspect…
▽ More
We have designed, fabricated and tested an XY-addressable readout system that is specifically tailored for the reading of superconducting flux qubits in an integrated circuit that could enable adiabatic quantum optimization. In such a system, the flux qubits only need to be read at the end of an adiabatic evolution when quantum mechanical tunneling has been suppressed, thus simplifying many aspects of the readout process. The readout architecture for an $N$-qubit adiabatic quantum optimization system comprises $N$ hysteretic dc SQUIDs and $N$ rf SQUID latches controlled by $2\sqrt{N} + 2$ bias lines. The latching elements are coupled to the qubits and the dc SQUIDs are then coupled to the latching elements. This readout scheme provides two key advantages: First, the latching elements provide exceptional flux sensitivity that significantly exceeds what may be achieved by directly coupling the flux qubits to the dc SQUIDs using a practical mutual inductance. Second, the states of the latching elements are robust against the influence of ac currents generated by the switching of the hysteretic dc SQUIDs, thus allowing one to interrogate the latching elements repeatedly so as to mitigate the effects of stochastic switching of the dc SQUIDs. We demonstrate that it is possible to achieve single qubit read error rates of $<10^{-6}$ with this readout scheme. We have characterized the system-level performance of a 128-qubit readout system and have measured a readout error probability of $8\times10^{-5}$ in the presence of optimal latching element bias conditions.
△ Less
Submitted 16 September, 2010; v1 submitted 6 May, 2009;
originally announced May 2009.
-
Implementation of a Quantum Annealing Algorithm Using a Superconducting Circuit
Authors:
R. Harris,
A. J. Berkley,
J. Johansson,
M. W. Johnson,
T. Lanting,
P. Bunyk,
E. Tolkacheva,
E. Ladizinsky,
B. Bumble,
A. Fung,
A. Kaul,
A. Kleinsasser,
S. Han
Abstract:
A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two…
▽ More
A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.
△ Less
Submitted 23 March, 2009;
originally announced March 2009.
-
Geometrical dependence of low frequency noise in superconducting flux qubits
Authors:
T. Lanting,
A. J. Berkley,
B. Bumble,
P. Bunyk,
A. Fung,
J. Johansson,
A. Kaul,
A. Kleinsasser,
E. Ladizinsky,
F. Maibaum,
R. Harris,
M. W. Johnson,
E. Tolkacheva,
M. H. S. Amin
Abstract:
A general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson junction superconducting flux qubits has been used to study a series of 85 devices of varying design. The variation in flux noise across sets of qubits with identical designs was observed to be small. However, the levels of flux noise systematically varied between qubit designs with strong de…
▽ More
A general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson junction superconducting flux qubits has been used to study a series of 85 devices of varying design. The variation in flux noise across sets of qubits with identical designs was observed to be small. However, the levels of flux noise systematically varied between qubit designs with strong dependence upon qubit wiring length and wiring width. Furthermore, qubits fabricated above a superconducting ground plane yielded lower noise than qubits without such a layer. These results support the hypothesis that localized magnetic impurities in the vicinity of the qubit wiring are a key source of low frequency flux noise in superconducting devices.
△ Less
Submitted 1 December, 2008;
originally announced December 2008.
-
Single flux quantum circuits with dam** based on dissipative transmission lines
Authors:
E. M. Tolkacheva,
D. V. Balashov,
M. I. Khabipov,
A. B. Zorin
Abstract:
We propose and demonstrate the functioning of a special Rapid Single Flux Quantum (RSFQ) circuit with frequency-dependent dam**. This dam** is achieved by shunting individual Josephson junctions by pieces of open-ended RC transmission lines. Our circuit includes a toggle flip-flop cell, Josephson transmission lines transferring single flux quantum pulses to and from this cell, as well as DC/…
▽ More
We propose and demonstrate the functioning of a special Rapid Single Flux Quantum (RSFQ) circuit with frequency-dependent dam**. This dam** is achieved by shunting individual Josephson junctions by pieces of open-ended RC transmission lines. Our circuit includes a toggle flip-flop cell, Josephson transmission lines transferring single flux quantum pulses to and from this cell, as well as DC/SFQ and SFQ/DC converters. Due to the desired frequency-dispersion in the RC line shunts which ensures sufficiently low noise at low frequencies, such circuits are well-suited for integrating with the flux/phase Josephson qubit and enable its efficient control.
△ Less
Submitted 3 April, 2008;
originally announced April 2008.
-
Self-shunted Al/AlOx/Al Josephson junctions
Authors:
S. V. Lotkhov,
E. M. Tolkacheva,
D. V. Balashov,
M. I. Khabipov,
F. -I. Buchholz,
A. B. Zorin
Abstract:
Self-shunted aluminum Josephson junctions with high-transparency barriers were fabricated using the shadow-evaporation technique and measured at low temperatures, T=25 mK. Due to high junction transparency, the IV-characteristics were found to be of only small hysteresis with retrap**-to-switching current ratio of up to 80%. The observed critical currents were close to the Ambegaokar-Baratoff…
▽ More
Self-shunted aluminum Josephson junctions with high-transparency barriers were fabricated using the shadow-evaporation technique and measured at low temperatures, T=25 mK. Due to high junction transparency, the IV-characteristics were found to be of only small hysteresis with retrap**-to-switching current ratio of up to 80%. The observed critical currents were close to the Ambegaokar-Baratoff values (up to 80-100%). Good barrier quality was confirmed by the low subgap leakage currents in the quasiparticle branches, which makes the self-shunted Al junctions promising for application in integrated RSFQ-qubit circuitry.
△ Less
Submitted 22 May, 2006;
originally announced May 2006.
-
Dynamics of Josephson junctions and single-flux-quantum networks with superconductor-insulator-normal metal junction shunts
Authors:
A. B. Zorin,
E. M. Tolkacheva,
M. I. Khabipov,
F. -I. Buchholz,
J. Niemeyer
Abstract:
Within the framework of the microscopic model of tunneling, we modelled the behavior of the Josephson junction shunted by the Superconductor-Insulator-Normal metal (SIN) tunnel junction. We found that the electromagnetic impedance of the SIN junction yields both the frequency-dependent dam** and dynamic reactance which leads to an increase in the effective capacitance of the circuit. We calcul…
▽ More
Within the framework of the microscopic model of tunneling, we modelled the behavior of the Josephson junction shunted by the Superconductor-Insulator-Normal metal (SIN) tunnel junction. We found that the electromagnetic impedance of the SIN junction yields both the frequency-dependent dam** and dynamic reactance which leads to an increase in the effective capacitance of the circuit. We calculated the dc I-V curves and transient characteristics of these circuits and explained their quantitative differences to the curves obtained within the resistively shunted junction model. The correct operation of the basic single-flux-quanta circuits with such SIN-shunted junctions, i.e. the Josephson transmission line and the toggle flip-flop, have also been modelled.
△ Less
Submitted 23 December, 2005;
originally announced December 2005.
-
Rate-dependent propagation of cardiac action potentials in a one-dimensional fiber
Authors:
John W. Cain,
Elena G. Tolkacheva,
David G. Schaeffer,
Daniel J. Gauthier
Abstract:
Action potential duration (APD) restitution, which relates APD to the preceding diastolic interval (DI), is a useful tool for predicting the onset of abnormal cardiac rhythms. However, it is known that different pacing protocols lead to different APD restitution curves (RCs). This phenomenon, known as APD rate-dependence, is a consequence of memory in the tissue. In addition to APD restitution,…
▽ More
Action potential duration (APD) restitution, which relates APD to the preceding diastolic interval (DI), is a useful tool for predicting the onset of abnormal cardiac rhythms. However, it is known that different pacing protocols lead to different APD restitution curves (RCs). This phenomenon, known as APD rate-dependence, is a consequence of memory in the tissue. In addition to APD restitution, conduction velocity restitution also plays an important role in the spatiotemporal dynamics of cardiac tissue. We present new results concerning rate-dependent restitution in the velocity of propagating action potentials in a one-dimensional fiber. Our numerical simulations show that, independent of the amount of memory in the tissue, waveback velocity exhibits pronounced rate-dependence and the wavefront velocity does not. Moreover, the discrepancy between waveback velocity RCs is most significant for small DI. We provide an analytical explanation of these results, using a system of coupled maps to relate the wavefront and waveback velocities. Our calculations show that waveback velocity rate-dependence is due to APD restitution, not memory.
△ Less
Submitted 29 July, 2004;
originally announced July 2004.
-
An ionically based map** model with memory for cardiac restitution
Authors:
David G. Schaeffer,
John W. Cain,
Daniel J. Gauthier,
Soma S. Kalb,
Wanda Krassowska,
Robert A. Oliver,
Elena G. Tolkacheva
Abstract:
Many features of the sequence of action potentials produced by repeated stimulation of a cardiac patch can be modeled by a 1D map**, but not the full behavior observed in the restitution portrait: in particular, not (i) distinct slopes for dynamic and S1-S2 restitution (rate dependence) and not (ii) long transients in the approach to steady state (accomodation). To address these shortcomings,…
▽ More
Many features of the sequence of action potentials produced by repeated stimulation of a cardiac patch can be modeled by a 1D map**, but not the full behavior observed in the restitution portrait: in particular, not (i) distinct slopes for dynamic and S1-S2 restitution (rate dependence) and not (ii) long transients in the approach to steady state (accomodation). To address these shortcomings, \emph{ad hoc} 2D map**s, where the second variable is a ``memory'' variable, have been proposed; it seems that these models exhibit some, but not all, of the relevant behavior. In this paper we introduce a new 2D map** and determine a set of parameters for it that gives a rather accurate description of the full restitution portrait found for one animal. The changes in the map**, compared to previous models, result from requiring that the map** can be derived as an asymptotic limit of a simple ionic model. Among other benefits, one can interpret the parameters in the map** in terms of the ionic model. The ionic model is an extension of a two-current model that adds a third dependent variable, a generalized concentration. The simplicity of the ionic model and the physiological basis for the map** contribute to the usefulness of these ideas for describing restitution data in a variety of contexts. The fitting procedure is straightforward and can easily be applied to obtain a mathematical model for data from other experiments, including experiments on different species. Uniqueness of the parameter choice is also discussed.
△ Less
Submitted 9 July, 2004;
originally announced July 2004.
-
Control of cardiac alternans in a map** model with memory
Authors:
Elena Tolkacheva,
Monica M. Romeo,
Daniel J. Gauthier
Abstract:
We investigate a map-based model of paced cardiac muscle in the presence of closed-loop feedback control. The model relates the duration of an action potential to the preceding diastolic interval as well as the preceding action potential duration and thus has some amount of `memory.' We find that the domain of control depends on this memory, independently of the specific functional form of the m…
▽ More
We investigate a map-based model of paced cardiac muscle in the presence of closed-loop feedback control. The model relates the duration of an action potential to the preceding diastolic interval as well as the preceding action potential duration and thus has some amount of `memory.' We find that the domain of control depends on this memory, independently of the specific functional form of the map. The memory-dependent domain of control can encompass large feedback gains, thus providing the first possible explanation of the recent experimental results of Hall et al. [Phys. Rev. Lett, 88, 198102 (2002)] on controlling alternans in small pieces of rapidly-paced cardiac muscle.
△ Less
Submitted 24 March, 2003;
originally announced March 2003.
