-
Aalto-1, multi-payload CubeSat: design, integration and launch
Authors:
J. Praks,
M. Rizwan Mughal,
R. Vainio,
P. Janhunen,
J. Envall,
P. Oleynik,
A. Näsilä,
H. Leppinen,
P. Niemelä,
A. Slavinskis,
J. Gieseler,
P. Toivanen,
T. Tikka,
T. Peltola,
A. Bosser,
G. Schwarzkopf,
N. Jovanovic,
B. Riwanto,
A. Kestilä,
A. Punkkinen,
R. Punkkinen,
H. -P. Hedman,
T. Säntti,
J. -O. Lill,
J. M. K. Slotte
, et al. (2 additional authors not shown)
Abstract:
The design, integration, testing, and launch of the first Finnish satellite Aalto-1 is briefly presented in this paper. Aalto-1, a three-unit CubeSat, launched into Sun-synchronous polar orbit at an altitude of approximately 500 km, is operational since June 2017. It carries three experimental payloads: Aalto Spectral Imager (AaSI), Radiation Monitor (RADMON), and Electrostatic Plasma Brake (EPB).…
▽ More
The design, integration, testing, and launch of the first Finnish satellite Aalto-1 is briefly presented in this paper. Aalto-1, a three-unit CubeSat, launched into Sun-synchronous polar orbit at an altitude of approximately 500 km, is operational since June 2017. It carries three experimental payloads: Aalto Spectral Imager (AaSI), Radiation Monitor (RADMON), and Electrostatic Plasma Brake (EPB). AaSI is a hyperspectral imager in visible and near-infrared (NIR) wavelength bands, RADMON is an energetic particle detector and EPB is a de-orbiting technology demonstration payload. The platform was designed to accommodate multiple payloads while ensuring sufficient data, power, radio, mechanical and electrical interfaces. The design strategy of platform and payload subsystems consists of in-house development and commercial subsystems. The CubeSat Assembly, Integration & Test (AIT) followed Flatsat -- Engineering-Qualification Model (EQM) -- Flight Model (FM) model philosophy for qualification and acceptance.
The paper briefly describes the design approach of platform and payload subsystems, their integration and test campaigns, and spacecraft launch. The paper also describes the ground segment & services that were developed by the Aalto-1 team.
△ Less
Submitted 26 January, 2021;
originally announced January 2021.
-
Aalto-1, multi-payload CubeSat: In-orbit results and lessons learned
Authors:
M. R. Mughal,
J. Praks,
R. Vainio,
P. Janhunen,
J. Envall,
A. Näsilä,
P. Oleynik,
P. Niemelä,
A. Slavinskis,
J. Gieseler,
N. Jovanovic,
B. Riwanto,
P. Toivanen,
H. Leppinen,
T. Tikka,
A. Punkkinen,
R. Punkkinen,
H. -P. Hedman,
J. -O. Lill,
J. M. K. Slotte
Abstract:
The in-orbit results and lessons learned of the first Finnish satellite Aalto-1 are briefly presented in this paper. Aalto-1, a three-unit CubeSat which was launched in June 2017, performed AaSI (Aalto Spectral Imager), Radiation Monitor (RADMON), and Electrostatic Plasma Brake (EPB) missions. The satellite partly fulfilled its mission objectives and allowed to either perform or attempt the experi…
▽ More
The in-orbit results and lessons learned of the first Finnish satellite Aalto-1 are briefly presented in this paper. Aalto-1, a three-unit CubeSat which was launched in June 2017, performed AaSI (Aalto Spectral Imager), Radiation Monitor (RADMON), and Electrostatic Plasma Brake (EPB) missions. The satellite partly fulfilled its mission objectives and allowed to either perform or attempt the experiments. Although attitude control was partially functional, AaSI and RADMON were able to acquire valuable measurements. EPB was successfully commissioned but the tether deployment was not successful.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
FORESAIL-1 cubesat mission to measure radiation belt losses and demonstrate de-orbiting
Authors:
FORESAIL collaboration,
M. Palmroth,
J. Praks,
R. Vainio,
P. Janhunen,
E. K. J. Kilpua,
N. Yu. Ganushkina,
A. Afanasiev,
M. Ala-Lahti,
A. Alho,
T. Asikainen,
E. Asvestari,
M. Battarbee,
A. Binios,
A. Bosser,
T. Brito,
J. Envall,
U. Ganse,
H. George,
J. Gieseler,
S. Good,
M. Grandin,
S. Haslam,
H. -P. Hedman,
H. Hietala
, et al. (35 additional authors not shown)
Abstract:
Today, the near-Earth space is facing a paradigm change as the number of new spacecraft is literally sky-rocketing. Increasing numbers of small satellites threaten the sustainable use of space, as without removal, space debris will eventually make certain critical orbits unusable. A central factor affecting small spacecraft health and leading to debris is the radiation environment, which is unpred…
▽ More
Today, the near-Earth space is facing a paradigm change as the number of new spacecraft is literally sky-rocketing. Increasing numbers of small satellites threaten the sustainable use of space, as without removal, space debris will eventually make certain critical orbits unusable. A central factor affecting small spacecraft health and leading to debris is the radiation environment, which is unpredictable due to an incomplete understanding of the near-Earth radiation environment itself and its variability driven by the solar wind and outer magnetosphere. This paper presents the FORESAIL-1 nanosatellite mission, having two scientific and one technological objectives. The first scientific objective is to measure the energy and flux of energetic particle loss to the atmosphere with a representative energy and pitch angle resolution over a wide range of magnetic local times. To pave the way to novel model - in situ data comparisons, we also show preliminary results on precipitating electron fluxes obtained with the new global hybrid-Vlasov simulation Vlasiator. The second scientific objective of the FORESAIL-1 mission is to measure energetic neutral atoms (ENAs) of solar origin. The solar ENA flux has the potential to contribute importantly to the knowledge of solar eruption energy budget estimations. The technological objective is to demonstrate a satellite de-orbiting technology, and for the first time, make an orbit manoeuvre with a propellantless nanosatellite. FORESAIL-1 will demonstrate the potential for nanosatellites to make important scientific contributions as well as promote the sustainable utilisation of space by using a cost-efficient de-orbiting technology.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
Steam balloon concept for lifting rockets to launch altitude
Authors:
Pekka Janhunen,
Petri Toivanen,
Kimmo Ruosteenoja
Abstract:
Launching orbital and suborbital rockets from a high altitude is beneficial because of e.g. nozzle optimisation and reduced drag. Aeroplanes and gas balloons have been used for the purpose. Here we present a concept where a balloon is filled with pure water vapour on ground so that it rises to the launch altitude. The system resembles a gas balloon because no onboard energy source is carried and n…
▽ More
Launching orbital and suborbital rockets from a high altitude is beneficial because of e.g. nozzle optimisation and reduced drag. Aeroplanes and gas balloons have been used for the purpose. Here we present a concept where a balloon is filled with pure water vapour on ground so that it rises to the launch altitude. The system resembles a gas balloon because no onboard energy source is carried and no hard objects fall down. We simulate the ascent behaviour of the balloon. In the baseline simulation, we consider a 10 tonne rocket lifted to an altitude of 18 km. We model the trajectory of the balloon by taking into account steam adiabatic cooling, surface cooling, water condensation and balloon aerodynamic drag. The required steam mass proves to be only 1.4 times the mass of the rocket stage and the ascent time is around 10 minutes. For small payloads, surface cooling increases the relative amount of steam needed, unless insulation is applied to the balloon skin. The ground-filled steam balloon seems to be an attractive and sustainable method of lifting payloads such as rockets into high altitude.
△ Less
Submitted 28 January, 2019; v1 submitted 27 February, 2018;
originally announced March 2018.
-
Thrust vectoring of an electric solar wind sail with a realistic sail shape
Authors:
Petri Toivanen,
Pekka Janhunen
Abstract:
The shape of a rotating electric solar wind sail under the centrifugal force and solar wind dynamic pressure is modeled to address the sail attitude maintenance and thrust vectoring. The sail rig assumes centrifugally stretched main tethers that extend radially outward from the spacecraft in the sail spin plane. Furthermore, the tips of the main tethers host remote units that are connected by auxi…
▽ More
The shape of a rotating electric solar wind sail under the centrifugal force and solar wind dynamic pressure is modeled to address the sail attitude maintenance and thrust vectoring. The sail rig assumes centrifugally stretched main tethers that extend radially outward from the spacecraft in the sail spin plane. Furthermore, the tips of the main tethers host remote units that are connected by auxiliary tethers at the sail rim. Here, we derive the equation of main tether shape and present both a numerical solution and an analytical approximation for the shape as parametrized both by the ratio of the electric sail force to the centrifugal force and the sail orientation with respect to the solar wind direction. The resulting shape is such that near the spacecraft, the roots of the main tethers form a cone, whereas towards the rim, this coning is flattened by the centrifugal force, and the sail is coplanar with the sail spin plane. Our approximation for the sail shape is parametrized only by the tether root coning angle and the main tether length. Using the approximate shape, we obtain the torque and thrust of the electric sail force applied to the sail. As a result, the amplitude of the tether voltage modulation required for the maintenance of the sail attitude is given as a torque-free solution. The amplitude is smaller than that previously obtained for a rigid single tether resembling a spherical pendulum. This implies that less thrusting margin is required for the maintenance of the sail attitude. For a given voltage modulation, the thrust vectoring is then considered in terms of the radial and transverse thrust components.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
CubeSat testing of Coulomb drag propulsion
Authors:
Pekka Janhunen,
Jouni Envall,
Petri Toivanen,
Timo Rauhala,
Edward Haeggström,
Tor-Arne Grönland
Abstract:
In Coulomb drag propulsion, a long high voltage tether or system of tethers gathers momentum from a natural plasma stream such as solar wind or ionospheric plasma ram flow. A positively polarised tether in the solar wind can be used for efficient general-purpose interplanetary propellantless propulsion (the electric solar wind sail or E-sail), whereas a negatively polarised tether in LEO can be us…
▽ More
In Coulomb drag propulsion, a long high voltage tether or system of tethers gathers momentum from a natural plasma stream such as solar wind or ionospheric plasma ram flow. A positively polarised tether in the solar wind can be used for efficient general-purpose interplanetary propellantless propulsion (the electric solar wind sail or E-sail), whereas a negatively polarised tether in LEO can be used for efficient deorbiting of satellites (the plasma brake). Aalto-1 is a 3-U cubesat to be launched in May 2016. The satellite carries three scientific experiments including 100 m long Coulomb drag tether experiment. The tether is made of four 25 and 50 micrometre diameter aluminium wires that are ultrasonically bonded together every few centimetre intervals. The tether can be charged by an onboard voltage source up to one kilovolt positive and negative. The Coulomb drag is measured by monitoring the spin rate.
△ Less
Submitted 28 April, 2016;
originally announced April 2016.
-
TI tether rig for solving secular spinrate change problem of electric sail
Authors:
Pekka Janhunen,
Petri Toivanen
Abstract:
The electric solar wind sail (E-sail) is a way to propel a spacecraft by using the natural solar wind as a thrust source. The problem of secular spinrate change was identified earlier which is due to the orbital Coriolis effect and tends to slowly increase or decrease the sail's spinrate, depending on which way the sail is inclined with respect to the solar wind. Here we present an E-sail design a…
▽ More
The electric solar wind sail (E-sail) is a way to propel a spacecraft by using the natural solar wind as a thrust source. The problem of secular spinrate change was identified earlier which is due to the orbital Coriolis effect and tends to slowly increase or decrease the sail's spinrate, depending on which way the sail is inclined with respect to the solar wind. Here we present an E-sail design and its associated control algorithm which enable spinrate control during propulsive flight by the E-sail effect itself. In the design, every other maintether ("T-tether") is galvanically connected through the remote unit with the two adjacent auxtethers, while the other maintethers ("I-tethers") are insulated from the tethers. This enables one to effectively control the maintether and auxtether voltages separately, which in turn enables spinrate control. We use a detailed numerical simulation to show that the algorithm can fully control the E-sail's spin state in real solar wind. The simulation includes a simple and realistic set of controller sensors: an imager to detect remote unit angular positions and a vector accelerometer. The imager resolution requirement is modest and the accelerometer noise requirement is feasible to achieve. The TI tether rig enables building E-sails that are able to control their spin state fully and yet are actuated by pure tether voltage modulation from the main spacecraft and requiring no functionalities from the remote units during flight.
△ Less
Submitted 9 May, 2017; v1 submitted 17 March, 2016;
originally announced March 2016.
-
Approximate restoration of translational and rotational symmetries within the Lipkin method
Authors:
Y. Gao,
J. Dobaczewski,
P. Toivanen
Abstract:
Background: Nuclear self-consistent mean-field approaches are rooted in the density functional theory and, through the spontaneous symmetry breaking mechanism, allow for including important correlations, while kee** the simplicity of the approach. Because real ground states should have all symmetries of the nuclear Hamiltonian, these methods require subsequent symmetry restoration.
Purpose: We…
▽ More
Background: Nuclear self-consistent mean-field approaches are rooted in the density functional theory and, through the spontaneous symmetry breaking mechanism, allow for including important correlations, while kee** the simplicity of the approach. Because real ground states should have all symmetries of the nuclear Hamiltonian, these methods require subsequent symmetry restoration.
Purpose: We implement and study Lipkin method of approximate variation after projection applied to the restoration of the translational or rotational symmetries.
Methods: We use Lipkin operators up to quadratic terms in momenta or angular momenta with self-consistently determined values of the Peierls-Yoccoz translational masses or moments of inertia, respectively. Calculations based on Skyrme energy-density functional are performed for heavy, deformed, and paired nuclei.
Results: In deformed nuclei, the Peierls-Yoccoz translational masses along three different principal-axes directions of the intrinsic system can be different, which illustrates different widths of the total-momentum distributions. Numerically, the differences are only of the order of a few per cent. For the rotational-symmetry restoration, the Lipkin method compares favorably with the exact angular-momentum projection, which requires much larger computational effort.
Conclusions: The Lipkin method of translational and rotational symmetry restoration is a practical low-cost method of determining the corresponding correlation energies. It allows for a simultaneous restoration of several symmetries and can be relatively easily implemented in the standard self-consistent mean-field calculations, including those required for the parameter adjustments.
△ Less
Submitted 15 November, 2015; v1 submitted 9 November, 2015;
originally announced November 2015.
-
Safety criteria for flying E-sail through solar eclipse
Authors:
Pekka Janhunen,
Petri Toivanen
Abstract:
The electric solar wind sail (E-sail) propellantless propulsion device uses long, charged metallic tethers to tap momentum from the solar wind to produce spacecraft propulsion. If flying through planetary or moon eclipse, the long E-sail tethers can undergo significant thermal contraction and expansion. Rapid shortening of the tether increases its tension due to inertia of the tether and a Remote…
▽ More
The electric solar wind sail (E-sail) propellantless propulsion device uses long, charged metallic tethers to tap momentum from the solar wind to produce spacecraft propulsion. If flying through planetary or moon eclipse, the long E-sail tethers can undergo significant thermal contraction and expansion. Rapid shortening of the tether increases its tension due to inertia of the tether and a Remote Unit that is located on the tether tip (a Remote Unit is part of typical E-sail designs). We analyse by numerical simulation the conditions under which eclipse induced stresses are safe for E-sail tethers. We calculate the closest safe approach distances for Earth, Moon, Venus, Mars, Jupiter, Ceres and an exemplary 300 km main belt asteroid Interamnia for circular, parabolic and hyperbolic orbits. We find that any kind of eclipsing is safe beyond approximately 2.5 au distance, but for terrestrial planets safety depends on the parameters of the orbit. For example, for Mars the safe distance with 20 km E-sail tether lies between Phobos and Deimos orbits.
△ Less
Submitted 12 April, 2015; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Electric sail control mode for amplified transverse thrust
Authors:
Petri Toivanen,
Pekka Janhunen,
Jouni Envall
Abstract:
The electric solar wind sail produces thrust by centrifugally spanned high voltage tethers interacting with the solar wind protons. The sail attitude can be controlled and attitude maneuvers are possible by tether voltage modulation synchronous with the sail rotation. Especially, the sail can be inclined with respect to the solar wind direction to obtain transverse thrust to change the osculating…
▽ More
The electric solar wind sail produces thrust by centrifugally spanned high voltage tethers interacting with the solar wind protons. The sail attitude can be controlled and attitude maneuvers are possible by tether voltage modulation synchronous with the sail rotation. Especially, the sail can be inclined with respect to the solar wind direction to obtain transverse thrust to change the osculating orbit angular momentum. Such an inclination has to be maintained by a continual control voltage modulation. Consequently, the tether voltage available for the thrust is less than the maximum voltage provided by the power system. Using a spherical pendulum as a model for a single rotating tether, we derive analytical estimations for the control efficiency for two separate sail control modes. One is a continuous control modulation that corresponds to strictly planar tether tip motion. The other is an on-off modulation with the tether tip moving along a closed loop on a saddle surface. The novel on-off mode is introduced here to both amplify the transverse thrust and reduce the power consumption. During the rotation cycle, the maximum voltage is applied to the tether only over two thrusting arcs when most of the transverse thrust is produced. In addition to the transverse thrust, we obtain the thrusting angle and electric power consumption for the two control modes. It is concluded that while the thrusting angle is about half of the sail inclination for the continuous modulation it approximately equals to the inclination angle for the on-off modulation. The efficiency of the on-off mode is emphasized when power consumption is considered, and the on-off mode can be used to improve the propulsive acceleration through the reduced power system mass.
△ Less
Submitted 17 November, 2014;
originally announced November 2014.
-
An intrinsic way to control E-sail spin
Authors:
Pekka Janhunen,
Petri Toivanen
Abstract:
We show that by having the auxtethers made partly or completely of conducting material and by controlling their voltages, it is possible to control the spin rate of the electric solar wind sail by using the electric sail effect itself. The proposed intrinsic spin rate control scheme has enough control authority to overcome the secular change of the spin rate due to orbital Coriolis effect.
We show that by having the auxtethers made partly or completely of conducting material and by controlling their voltages, it is possible to control the spin rate of the electric solar wind sail by using the electric sail effect itself. The proposed intrinsic spin rate control scheme has enough control authority to overcome the secular change of the spin rate due to orbital Coriolis effect.
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
E-sail test payload of ESTCube-1 nanosatellite
Authors:
Jouni Envall,
Pekka Janhunen,
Petri Toivanen,
Mihkel Pajusalu,
Erik Ilbis,
Jaanus Kalde,
Matis Averin,
Henri Kuuste,
Kaspars Laizans,
Viljo Allik,
Timo Rauhala,
Henri Seppänen,
Sergiy Kiprich,
Jukka Ukkonen,
Edward Haeggström,
Taneli Kalvas,
Olli Tarvainen,
Janne Kauppinen,
Antti Nuottajärvi,
Hannu Koivisto
Abstract:
The scientific mission of ESTCube-1, launched in May 2013, is to measure the Electric solar wind sail (E-sail) force in orbit. The experiment is planned to push forward the development of E-sail, a propulsion method recently invented at the Finnish Meteorological Institute. E-sail is based on extracting momentum from the solar wind plasma flow by using long thin electrically charged tethers. ESTCu…
▽ More
The scientific mission of ESTCube-1, launched in May 2013, is to measure the Electric solar wind sail (E-sail) force in orbit. The experiment is planned to push forward the development of E-sail, a propulsion method recently invented at the Finnish Meteorological Institute. E-sail is based on extracting momentum from the solar wind plasma flow by using long thin electrically charged tethers. ESTCube-1 is equipped with one such tether, together with hardware capable of deploying and charging it. At the orbital altitude of ESTCube-1 (660--680~km) there is no solar wind present. Instead, ESTCube-1 shall observe the interaction between the charged tether and the ionospheric plasma. The ESTCube-1 payload uses a 10-meter, partly two-filament E-sail tether and a motorized reel on which it is stored. The tether shall be deployed from a spinning satellite with the help of centrifugal force. An additional mass is added at the tip of the tether to assist with the deployment. During E-sail experiment the tether shall be charged to 500~V potential. Both positive and negative voltages shall be experimented with. The voltage is provided by a dedicated high voltage source and delivered to the tether through a slip ring contact. When the negative voltage is applied to the tether, the satellite body is expected to attract electron flow capable of compensating for the ion flow, which runs to the tether from the surrounding plasma. With the positive voltage applied, onboard cold cathode electron guns are used to remove excess electrons to maintain the positive voltage of the tether. In this paper we present the design and structure of the tether payload of ESTCube-1.
△ Less
Submitted 28 April, 2014;
originally announced April 2014.
-
Electric solar wind sail applications overview
Authors:
Pekka Janhunen,
Petri Toivanen,
Jouni Envall,
Sini Merikallio,
Giuditta Montesanti,
Jose Gonzalez del Amo,
Urmas Kvell,
Mart Noorma,
Silver Lätt
Abstract:
We analyse the potential of the electric solar wind sail for solar system space missions. Applications studied include fly-by missions to terrestrial planets (Venus, Mars and Phobos, Mercury) and asteroids, missions based on non-Keplerian orbits (orbits that can be maintained only by applying continuous propulsive force), one-way boosting to outer solar system, off-Lagrange point space weather for…
▽ More
We analyse the potential of the electric solar wind sail for solar system space missions. Applications studied include fly-by missions to terrestrial planets (Venus, Mars and Phobos, Mercury) and asteroids, missions based on non-Keplerian orbits (orbits that can be maintained only by applying continuous propulsive force), one-way boosting to outer solar system, off-Lagrange point space weather forecasting and low-cost impactor probes for added science value to other missions. We also discuss the generic idea of data clippers (returning large volumes of high resolution scientific data from distant targets packed in memory chips) and possible exploitation of asteroid resources. Possible orbits were estimated by orbit calculations assuming circular and coplanar orbits for planets. Some particular challenge areas requiring further research work and related to some more ambitious mission scenarios are also identified and discussed.
△ Less
Submitted 23 April, 2014;
originally announced April 2014.
-
Deformations and quasiparticle spectra of nuclei in the nobelium region
Authors:
Yue Shi,
J. Dobaczewski,
P. T. Greenlees,
J. Toivanen,
P. Toivanen
Abstract:
We have performed self-consistent Skyrme Hartree-Fock-Bogolyubov calculations for nuclei close to $^{254}$No. Self-consistent deformations, including $β_{2,4,6,8}$ as functions of the rotational frequency, were determined for even-even nuclei $^{246,248,250}$Fm, $^{252,254}$No, and $^{256}$Rf. The quasiparticle spectra for N=151 isotones and Z=99 isotopes were calculated and compared with experime…
▽ More
We have performed self-consistent Skyrme Hartree-Fock-Bogolyubov calculations for nuclei close to $^{254}$No. Self-consistent deformations, including $β_{2,4,6,8}$ as functions of the rotational frequency, were determined for even-even nuclei $^{246,248,250}$Fm, $^{252,254}$No, and $^{256}$Rf. The quasiparticle spectra for N=151 isotones and Z=99 isotopes were calculated and compared with experimental data and the results of Woods-Saxon calculations. We found that our calculations give high-order deformations similar to those obtained for the Woods-Saxon potential, and that the experimental quasiparticle energies are reasonably well reproduced.
△ Less
Submitted 1 March, 2013;
originally announced March 2013.
-
Solution of the Skyrme-Hartree-Fock-Bogolyubov equations in the Cartesian deformed harmonic-oscillator basis. (VII) HFODD (v2.49t): a new version of the program
Authors:
N. Schunck,
J. Dobaczewski,
J. McDonnell,
W. Satula,
J. A. Sheikh,
A. Staszczak,
M. Stoitsov,
P. Toivanen
Abstract:
We describe the new version (v2.49t) of the code HFODD which solves the nuclear Skyrme Hartree-Fock (HF) or Skyrme Hartree-Fock-Bogolyubov (HFB) problem by using the Cartesian deformed harmonic-oscillator basis. In the new version, we have implemented the following physics features: (i) the isospin mixing and projection, (ii) the finite temperature formalism for the HFB and HF+BCS methods, (iii) t…
▽ More
We describe the new version (v2.49t) of the code HFODD which solves the nuclear Skyrme Hartree-Fock (HF) or Skyrme Hartree-Fock-Bogolyubov (HFB) problem by using the Cartesian deformed harmonic-oscillator basis. In the new version, we have implemented the following physics features: (i) the isospin mixing and projection, (ii) the finite temperature formalism for the HFB and HF+BCS methods, (iii) the Lipkin translational energy correction method, (iv) the calculation of the shell correction. A number of specific numerical methods have also been implemented in order to deal with large-scale multi-constraint calculations and hardware limitations: (i) the two-basis method for the HFB method, (ii) the Augmented Lagrangian Method (ALM) for multi-constraint calculations, (iii) the linear constraint method based on the approximation of the RPA matrix for multi-constraint calculations, (iv) an interface with the axial and parity-conserving Skyrme-HFB code HFBTHO, (v) the mixing of the HF or HFB matrix elements instead of the HF fields. Special care has been paid to using the code on massively parallel leadership class computers. For this purpose, the following features are now available with this version: (i) the Message Passing Interface (MPI) framework, (ii) scalable input data routines, (iii) multi-threading via OpenMP pragmas, (iv) parallel diagonalization of the HFB matrix in the simplex breaking case using the ScaLAPACK library. Finally, several little significant errors of the previous published version were corrected.
△ Less
Submitted 8 July, 2011; v1 submitted 9 March, 2011;
originally announced March 2011.
-
Linear response strength functions with iterative Arnoldi diagonalization
Authors:
J. Toivanen,
B. G. Carlsson,
J. Dobaczewski,
K. Mizuyama,
R. R. Rodriguez-Guzman,
P. Toivanen,
P. Vesely
Abstract:
We report on an implementation of a new method to calculate RPA strength functions with iterative non-hermitian Arnoldi diagonalization method, which does not explicitly calculate and store the RPA matrix. We discuss the treatment of spurious modes, numerical stability, and how the method scales as the used model space is enlarged. We perform the particle-hole RPA benchmark calculations for doub…
▽ More
We report on an implementation of a new method to calculate RPA strength functions with iterative non-hermitian Arnoldi diagonalization method, which does not explicitly calculate and store the RPA matrix. We discuss the treatment of spurious modes, numerical stability, and how the method scales as the used model space is enlarged. We perform the particle-hole RPA benchmark calculations for double magic nucleus 132Sn and compare the resulting electromagnetic strength functions against those obtained within the standard RPA.
△ Less
Submitted 16 December, 2009;
originally announced December 2009.