Showing 1–13 of 13 results for author: Todorova, M

A first-principles study of Zn induced liquid metal embrittlement at bcc and fcc grain boundaries

Authors: Ujjal Saikia, Mira Todorova, Tilmann Hickel

Abstract: Zn induced liquid metal embrittlement (LME) is a major concern in particular for advanced high strength steels, which often contain a significant amount of austenite compared to established steel grades. Using density functional theory (DFT) calculations we, therefore, compare the behaviour of Zn in ferrite (bcc) and austenite (fcc) grain boundaries (GBs) with different magnetic ordering to invest… ▽ More Zn induced liquid metal embrittlement (LME) is a major concern in particular for advanced high strength steels, which often contain a significant amount of austenite compared to established steel grades. Using density functional theory (DFT) calculations we, therefore, compare the behaviour of Zn in ferrite (bcc) and austenite (fcc) grain boundaries (GBs) with different magnetic ordering to investigate the role of crystal structure as well as magnetism in LME. We address the performance of DFT based paramagnetic calculations by utilizing the spin space averaging relaxation approach. Our results show that both magnetic and elastic contributions have significant influence towards segregation and embrittling behaviour of Zn. The primary requirement is the elastic contribution, while the presence of magnetic disorder increases the critical concentrations for the onset of GB weakening. While Zn segregation is more favourable in bcc compared to fcc GB, larger impact of Zn coverage on GB weakening is observed for fcc. For both structures, the rapid decrease in surface defect state energies is identified as the driving force behind GB weakening. These surface defect states stabilize at lower Zn concentrations than GB defect states. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Chemical and structural characterization of the native oxide scale on a Mg-based alloy

Authors: Deborah Neuß, Ingrid E. McCarroll, Siyuan Zhang, Eric Woods, Wassilios J. Delis, Leandro Tanure, Hauke Springer, Stefanie Sandlöbes, **g Yang, Mira Todorova, Daniela Zander, Christina Scheu, Jochen M. Schneider, Marcus Hans

Abstract: In this study, the structure and composition of the native oxide forming on the basal plane (0001) of Mg-2Al-0.1Ca is investigated by a correlative approach, combining scanning transmission electron microscopy (STEM) and atom probe tomography (APT). Atom probe specimens were prepared conventionally in a Ga focused ion beam (FIB) as well as a Xe plasma FIB in a cryogenic setup and subsequently clea… ▽ More In this study, the structure and composition of the native oxide forming on the basal plane (0001) of Mg-2Al-0.1Ca is investigated by a correlative approach, combining scanning transmission electron microscopy (STEM) and atom probe tomography (APT). Atom probe specimens were prepared conventionally in a Ga focused ion beam (FIB) as well as a Xe plasma FIB in a cryogenic setup and subsequently cleaned in the atom probe to remove surface contamination before oxidation. While thermal energy input from the laser and longer atmospheric exposure time increased the measured hydrogen content in the specimen's apex region, cryo preparation revealed, that the hydrogen uptake in magnesium is independent of the employment of conventional or cryogenic FIB preparation. TEM measurements demonstrated the growth of a (111) MgO oxide layer with 3-4 nm thickness on the basal (0001) plane of the Mg atom probe specimen. APT data further revealed the formation of an aluminum-rich region between bulk Mg and the native oxide. The aluminum enrichment of up to ~20 at.% at the interface is consistent with an inward growth of the oxide scale. △ Less

Submitted 2 June, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Construction and analysis of surface phase diagrams to describe segregation and dissolution behavior of Al and Ca in Mg alloys

Authors: **g Yang, K. B. Sravan Kumar, Mira Todorova, Jörg Neugebauer

Abstract: Segregation and dissolution behavior of Mg alloyed with Ca and Al are studied by performing density functional theory calculations considering an extensive set of surface structures and compositions. Combining ab initio surface science approaches with cluster expansion for ordered surface structures we construct surface phase diagrams for these alloys. We utilize these diagrams to study segregatio… ▽ More Segregation and dissolution behavior of Mg alloyed with Ca and Al are studied by performing density functional theory calculations considering an extensive set of surface structures and compositions. Combining ab initio surface science approaches with cluster expansion for ordered surface structures we construct surface phase diagrams for these alloys. We utilize these diagrams to study segregation phenomena and chemical trends for surfaces in contact with a dry environment or with an aqueous electrolyte. We show that the presence of water dramatically impacts the stability and chemical composition of the considered metallic surfaces. We furthermore find that the two alloying elements behave qualitatively different: whereas Ca strongly segregates to the surface and becomes dissolved upon exposure of the surface to water, Al shows an anti-segregation behavior, i.e., it remains in Mg bulk. These findings provide an explanation for the experimentally observed increase/decrease in corrosion rates when alloying Mg with Al/Ca. △ Less

Submitted 10 July, 2023; v1 submitted 20 July, 2022; originally announced July 2022.

Comments: 12 pages, 9 figures, submitted to Phys. Rev. Materials

Controlled do** of electrocatalysts through engineering impurities

Authors: Se-Ho Kim, Su-Hyun Yoo, Sangyong Shin, Ayman A. El-Zoka, Olga Kasian, Joohyun Lim, Jiwon Jeong, Christina Scheu, Joerg Neugebauer, Hyunjoo Lee, Mira Todorova, Baptiste Gault

Abstract: Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation react… ▽ More Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation reaction (HOR) hinders upscaling despite promising catalysts. Here, we observe an unexpected ingress of B into Pd nano-catalysts synthesised by wet-chemistry, gain control over this B-do**, and report on its influence on the HOR activity in alkaline conditions. We rationalize our findings using ab-initio calculations of both H- and OH-adsorption on B-doped Pd. Using this "impurity engineering" approach, we thus design Pt-free catalysts as required in electrochemical energy conversion devices, e.g. next generations of AEMFCs, that satisfy the economic and environmental constraints, i.e. reasonable operating costs and long-term stability, to enable the hydrogen economy. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Origins of the hydrogen signal in atom probe tomography

Authors: Su-Hyun Yoo, Se-Ho Kim, Eric Woods, Baptiste Gault, Mira Todorova, Jörg Neugebauer

Abstract: Atom Probe Tomography (APT) analysis is being actively used to provide near-atomic-scale information on the composition of complex materials in three-dimensions. In recent years, there has been a surge of interest in the technique to investigate the distribution of hydrogen in metals. However, the presence of hydrogen in the analysis of almost all specimens from nearly all material systems has cau… ▽ More Atom Probe Tomography (APT) analysis is being actively used to provide near-atomic-scale information on the composition of complex materials in three-dimensions. In recent years, there has been a surge of interest in the technique to investigate the distribution of hydrogen in metals. However, the presence of hydrogen in the analysis of almost all specimens from nearly all material systems has caused numerous debates as to its origins and impact on the quantitativeness of the measurement. It is often perceived that most H arises from residual gas ionization, therefore affecting primarily materials with a relatively low evaporation field. In this work, we perform systematic investigations to identify the origin of H residuals in APT experiments by combining density-functional theory (DFT) calculations and APT measurements on an alkali and a noble metal, namely Na and Pt, respectively. We report that no H residual is found in Na metal samples, but in Pt, which has a higher evaporation field, a relatively high signal of H is detected. These results contradict the hypothesis of the H signal being due to direct ionization of residual H$_2$ without much interaction with the specimen's surface. Based on DFT, we demonstrate that alkali metals are thermodynamically less likely to be subject to H contamination under APT-operating conditions compared to transition or noble metals. These insights indicate that the detected H-signal is not only from ionization of residual gaseous H$_2$ alone, but is strongly influenced by material-specific physical properties. The origin of H residuals is elucidated by considering different conditions encountered during APT experiments, specifically, specimen-preparation, transportation, and APT-operating conditions by taking thermodynamic and kinetic aspects into account. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Comments: 33 pages, 5 main figures, 5 Supporting Information figures

Understanding alkali contamination in colloidal nanomaterials to unlock grain boundary impurity engineering

Authors: Se-Ho Kim, Su-Hyun Yoo, Poulami Chakraborty, Jiwon Jeong, Joohyun Lim, Ayman A. El-Zoka, Xuyang Zhou, Leigh T. Stephenson, Tilmann Hickel, Jörg Neugebauer, Christina Scheu, Mira Todorova, Baptiste Gault

Abstract: Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesi… ▽ More Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesized Pd nano-aerogels from a K2PdCl4 precursor and two different NaBH4 reductant concentrations in distilled water. Atom probe tomography reveals that the aerogel is poly-crystalline and that impurities (Na, K) are integrated from the solution into grain boundaries. Ab initio calculations indicate that these impurities preferentially bound to the Pd-metal surface and are ultimately found in grain boundaries forming as the particles coalesce during synthesis, with Na atoms thermodynamically equilibrating with the surrounding solution and K atoms remaining between growing grains. If controlled, impurity integration, i.e. grain boundary decoration, may offer opportunities for designing new nano-aerogels. △ Less

Submitted 4 November, 2021; v1 submitted 11 June, 2021; originally announced June 2021.

Dielectric properties of nano-confined water: a canonical thermopotentiostat approach

Authors: F. Deißenbeck, C. Freysoldt, M. Todorova, J. Neugebauer, S. Wippermann

Abstract: We introduce a novel approach to sample the canonical ensemble at constant temperature and applied electric potential. Our approach can be straightforwardly implemented into any density-functional theory code. Using thermopotentiostat molecular dynamics simulations allows us to compute the dielectric constant of nano-confined water without any assumptions for the dielectric volume. Compared to the… ▽ More We introduce a novel approach to sample the canonical ensemble at constant temperature and applied electric potential. Our approach can be straightforwardly implemented into any density-functional theory code. Using thermopotentiostat molecular dynamics simulations allows us to compute the dielectric constant of nano-confined water without any assumptions for the dielectric volume. Compared to the commonly used approach of calculating dielectric properties from polarization fluctuations, our thermopotentiostat technique reduces the required computational time by two orders of magnitude. △ Less

Submitted 14 August, 2020; v1 submitted 18 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Lett. 126, 136803 (2021)

SHAH: Hash Function based on Irregularly Decimated Chaotic Map

Authors: Mihaela Todorova, Borislav Stoyanov, Krzysztof Szczypiorski, Krasimir Kordov

Abstract: In this paper, we propose a novel hash function based on irregularly decimated chaotic map. The hash function called SHAH is based on two Tinkerbell maps filtered with irregular decimation rule. Exact study has been provided on the novel scheme using distribution analysis, sensitivity analysis, static analysis of diffusion and confusion, and collision analysis. The experimental data show that SHAH… ▽ More In this paper, we propose a novel hash function based on irregularly decimated chaotic map. The hash function called SHAH is based on two Tinkerbell maps filtered with irregular decimation rule. Exact study has been provided on the novel scheme using distribution analysis, sensitivity analysis, static analysis of diffusion and confusion, and collision analysis. The experimental data show that SHAH satisfied admirable level of security. △ Less

Submitted 19 August, 2018; v1 submitted 29 July, 2018; originally announced August 2018.

Comments: accepted for publication in International Journal of Electronics and Telecommunications, vol. 64

Self-Compression and Controllable Guidance of Multi-Millijoule Femtosecond Laser Pulses

Authors: I. G. Koprinkov, M. D. Todorov, M. E. Todorova, T. P. Todorov

Abstract: Self-compression of multi-millijoule femtosecond laser pulses and dramatic increase of the peak intensity are found in pressurized helium and neon within a range of intensity in which the ionization modification of the material parameters by the pulse is negligible. The pulse propagation is studied by the (3+1)-dimensional nonlinear Schroedinger equation including basic lowest order optical proc… ▽ More Self-compression of multi-millijoule femtosecond laser pulses and dramatic increase of the peak intensity are found in pressurized helium and neon within a range of intensity in which the ionization modification of the material parameters by the pulse is negligible. The pulse propagation is studied by the (3+1)-dimensional nonlinear Schroedinger equation including basic lowest order optical processes -- diffraction, group velocity dispersion of second order, and Kerr nonlinearity of third order. Smooth and well controllable pulse propagation dynamics is found. Constructing of compressed pulse of controllable parameters at given space target point can be achieved by a proper chose of the pulse energy and/or gas pressure. △ Less

Submitted 20 September, 2007; originally announced September 2007.

Comments: 13 pages, 9 figures

Report number: 02/07 TU-FPMI

Journal ref: Optics Communications, 281(20), 5249-5256, 2008

Self-Compression of High-Intensity Femtosecond Laser Pulses in Low Dispersion Regime

Authors: I. G. Koprinkov, M. D. Todorov, M. E. Todorova, T. P. Todorov

Abstract: Self-compression of femtosecond laser pulses and more than an order of magnitude increase of the peak intensity is found in a positive dispersion medium in low dispersion regime based on the (3+1)-dimensional nonlinear Schr{ö}dinger equation. A method of high-intensity femtosecond pulse formation can be developed on that basis. Self-compression of femtosecond laser pulses and more than an order of magnitude increase of the peak intensity is found in a positive dispersion medium in low dispersion regime based on the (3+1)-dimensional nonlinear Schr{ö}dinger equation. A method of high-intensity femtosecond pulse formation can be developed on that basis. △ Less

Submitted 23 June, 2007; v1 submitted 26 January, 2007; originally announced January 2007.

Comments: 4 pages, miktex, 3 figures

Report number: TU-MTOD: 1/07

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 40 (2007) F231-F236

Density-functional theory study of the initial oxygen incorporation in Pd(111)

Authors: Mira Todorova, Karsten Reuter, Matthias Scheffler

Abstract: Pd(111) has recently been shown to exhibit a propensity to form a sub-nanometer thin surface oxide film already well before a full monolayer coverage of adsorbed O atoms is reached on the surface. Aiming at an atomic-scale understanding of this finding, we study the initial oxygen incorporation into the Pd(111) surface using density-functional theory. We find that oxygen incorporation into the s… ▽ More Pd(111) has recently been shown to exhibit a propensity to form a sub-nanometer thin surface oxide film already well before a full monolayer coverage of adsorbed O atoms is reached on the surface. Aiming at an atomic-scale understanding of this finding, we study the initial oxygen incorporation into the Pd(111) surface using density-functional theory. We find that oxygen incorporation into the sub-surface region starts at essentially the same coverage as formation of the surface oxide. This implies that the role of sub-surface oxygen should be considered as that of a metastable precursor in the oxidation process of the surface. The mechanisms found to play a role towards the ensuing stabilization of an ordered oxidic structure with a mixed on-surface/sub-surface site occupation follow a clear trend over the late 4d transition metal series, as seen by comparing our data to previously published studies concerned with oxide formation at the basal surface of Ru, Rh and Ag. The formation of a linearly aligned O-TM-O trilayered structure (TM = Ru, Rh, Pd, Ag), together with an efficient coupling to the underlying substrate seem to be key ingredients in this respect. △ Less

Submitted 3 January, 2005; originally announced January 2005.

Comments: 8 pages including 5 figures; related publications can be found at http://www.fhi-berlin.mpg.de/th/th.html

Journal ref: Phys. Rev. B 71, 195403 (2005)

Kinetic hindrance during the initial oxidation of Pd(100) at ambient pressures

Authors: E. Lundgren, A. Stierle, M. Todorova, J. Gustafson, A. Mikkelsen, J. Rogal, K. Reuter, J. N. Andersen, H. Dosch, M. Scheffler

Abstract: The oxidation of the Pd(100) surface at oxygen pressures in the 10^-6 to 10^3 mbar range and temperatures up to 1000 K has been studied in-situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the phases present in the surface region and on the kinetics of the oxide formation. Depending on the (T,p) environmental conditions we either observe a thin sqrt(5… ▽ More The oxidation of the Pd(100) surface at oxygen pressures in the 10^-6 to 10^3 mbar range and temperatures up to 1000 K has been studied in-situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the phases present in the surface region and on the kinetics of the oxide formation. Depending on the (T,p) environmental conditions we either observe a thin sqrt(5) x sqrt(5) R27 surface oxide or the growth of a rough, poorly ordered bulk oxide film of PdO predominantly with (001) orientation. By either comparison to the surface phase diagram from first-principles atomistic thermodynamics or by explicit time-resolved measurements we identify a strong kinetic hindrance to the bulk oxide formation even at temperatures as high as 675 K. △ Less

Submitted 24 November, 2003; originally announced November 2003.

Comments: 4 pages including 4 figures, Related publications can be found at http://www.fhi-berlin.mpg.de/th/paper.html

Journal ref: Phys. Rev. Lett. 92, 046101 (2004)

The Pd(100)-(SQRT(5) x SQRT(5) R27^o)-O surface oxide revisited

Authors: M. Todorova, E. Lundgren, V. Blum, A. Mikkelsen, S. Gray, J. Gustafson, M. Borg, J. Rogal, K. Reuter, J. N. Andersen, M. Scheffler

Abstract: Combining high-resolution core-level spectroscopy (HRCLS), scanning tunneling microscopy (STM) and density-functional theory (DFT) calculations we reanalyze the Pd(100)-(SQRT(5) x SQRT(5) R27^o)-O surface oxide phase. We find that the prevalent structural model, a rumpled PdO(001) film suggested by previous low energy electron diffraction (LEED) work (M. Saidy et al., Surf. Sci. 494, L799 (200… ▽ More Combining high-resolution core-level spectroscopy (HRCLS), scanning tunneling microscopy (STM) and density-functional theory (DFT) calculations we reanalyze the Pd(100)-(SQRT(5) x SQRT(5) R27^o)-O surface oxide phase. We find that the prevalent structural model, a rumpled PdO(001) film suggested by previous low energy electron diffraction (LEED) work (M. Saidy et al., Surf. Sci. 494, L799 (2001)), is incompatible with all three employed methods. Instead, we suggest the two-dimensional film to consist of a strained PdO(101) layer on top of Pd(100). LEED intensity calculations show that this model is compatible with the experimental data of Saidy et al. △ Less

Submitted 4 April, 2003; originally announced April 2003.

Comments: 8 pages including 5 figures, Related publications can be found at http://www.fhi-berlin.mpg.de/th/paper.html

Journal ref: Surf. Sci. 541, 101-112 (2003)