-
Targeting low micro-roughness for 3D printed aluminium mirrors using a hot isostatic press
Authors:
Carolyn Atkins,
Younes Chahid,
Gregory Lister,
Rhys Tuck,
Richard Kotlewski,
Robert M. Snell,
Elaine R. Livera,
Mariam Faour,
Iain Todd,
Robert Deffley,
James Shipley,
Tom Walsh,
Johannes Gardstam,
Cyril Bourgenot,
Paul White,
Spencer Davies,
Samuel Tammas-Williams
Abstract:
Additive manufacturing (AM; 3D printing) in aluminium using laser powder bed fusion provides a new design space for lightweight mirror production. Printing layer-by-layer enables the use of intricate lattices for mass reduction, as well as organic shapes generated by topology optimisation, resulting in mirrors optimised for function as opposed to subtractive machining. However, porosity, a common…
▽ More
Additive manufacturing (AM; 3D printing) in aluminium using laser powder bed fusion provides a new design space for lightweight mirror production. Printing layer-by-layer enables the use of intricate lattices for mass reduction, as well as organic shapes generated by topology optimisation, resulting in mirrors optimised for function as opposed to subtractive machining. However, porosity, a common AM defect, is present in printed aluminium and it is a result of the printing environment being either too hot or too cold, or gas entrapped bubbles within the aluminium powder. When present in an AM mirror substrates, porosity manifests as pits on the reflective surface, which increases micro-roughness and therefore scattered light. There are different strategies to reduce the impact of porosity: elimination during printing, coating the aluminium print in nickel phosphorous, or to apply a heat and pressure treatment to close the pores, commonly known as a hot isostatic press (HIP).
This paper explores the application of HIP on printed aluminium substrates intended for mirror production using single point diamond turning (SPDT). The objective of the HIP is to reduce porosity whilst targeting a small grain growth within the aluminium, which is important in allowing the SPDT to generate surfaces with low micro-roughness. For this study, three disks, 50 mm diameter by 5 mm, were printed in AlSi10Mg at 0 deg, 45 deg, and 90 deg with respect to the build plate. X-ray computed tomography (XCT) was conducted before and after the HIP cycle to confirm the effectiveness of HIP to close porosity. The disks were SPDT and the micro-roughness evaluated. Mechanical testing and electron backscatter diffraction (EBSD) was used to quantify the mechanical strength and the grain size after HIP.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Investigation about the electrochemical reduction in 3YSZ, related phase transition and consequences
Authors:
C. Bechteler,
R. I. Todd
Abstract:
In this research the electrochemical reduction of 3YSZ was investigated in various atmospheres with different oxygen partial pressures under an electric field of 25 V/cm at an environmental temperature of 800 °C. At a certain oxygen partial pressure insufficient incorporation of oxygen in the sample led to electrochemical reduction of YSZ which shows two clearly distinguishable states. First, grey…
▽ More
In this research the electrochemical reduction of 3YSZ was investigated in various atmospheres with different oxygen partial pressures under an electric field of 25 V/cm at an environmental temperature of 800 °C. At a certain oxygen partial pressure insufficient incorporation of oxygen in the sample led to electrochemical reduction of YSZ which shows two clearly distinguishable states. First, greying of the material without a significant change in properties was detected which then transitioned into a second stage where a fundamental phase transition in the material happened within seconds from tetragonal 3YSZ towards FCC rocksalt ZrO or ZrON, dependent on the atmosphere. This phase transition is accompanied by blackening of the material, sudden increase in electrical conductivity, current concentration, and an obvious change in Raman spectrum.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
Use of 3D printing in astronomical mirror fabrication
Authors:
Melanie Roulet,
Carolyn Atkins,
Emmanuel Hugot,
Robert Snell,
Bart van de Vorst,
Katherine Morris,
Michel Marcos,
Iain Todd,
Christopher Miller,
Joris Dufils,
Szigfrid Farkas,
Gyorgy Mezo,
Fabio Tenegi,
Afrodisio Vega-Moreno,
Hermine Schnetler
Abstract:
In this paper we are exploring the possibilities of 3D printing in the fabrication of mirrors for astronomy. Taking the advantages of 3D printing to solve the existing problems caused by traditional manufacturing, two proof-of-concept mirror fabrication strategies are investigated in this paper. The First concept is a deformable mirror with embedded actuator supports system to minimise errors caus…
▽ More
In this paper we are exploring the possibilities of 3D printing in the fabrication of mirrors for astronomy. Taking the advantages of 3D printing to solve the existing problems caused by traditional manufacturing, two proof-of-concept mirror fabrication strategies are investigated in this paper. The First concept is a deformable mirror with embedded actuator supports system to minimise errors caused by the bonding interfaces during mirror assembly. The second concept is the adaption of the Stress Mirror Polishing (SMP) technique to a variety of mirror shapes by implemented a printed thickness distribution on the back side of the mirror. Design investigations and prototypes plans are presented for both studies.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
In situ and Operando X-ray Imaging of Directed Energy Deposition Additive Manufacturing
Authors:
Yunhui Chen,
Samuel J. Clark,
Lorna Sinclair,
Chu Lun Alex Leung,
Sebastian Marussi,
Thomas Connolley,
Oxana V. Magdysyuk,
Robert C. Atwood,
Gavin J. Baxter,
Martyn A. Jones,
David G. McCartney,
Iain Todd,
Peter D. Lee
Abstract:
The mechanical performance of Directed Energy Deposition Additive Manufactured (DED-AM) components can be highly material dependent. Through in situ and operando synchrotron X-ray imaging we capture the underlying phenomena controlling build quality of stainless steel (SS316) and titanium alloy (Ti6242 or Ti-6Al-2Sn-4Zr-2Mo). We reveal three mechanisms influencing the build efficiency of titanium…
▽ More
The mechanical performance of Directed Energy Deposition Additive Manufactured (DED-AM) components can be highly material dependent. Through in situ and operando synchrotron X-ray imaging we capture the underlying phenomena controlling build quality of stainless steel (SS316) and titanium alloy (Ti6242 or Ti-6Al-2Sn-4Zr-2Mo). We reveal three mechanisms influencing the build efficiency of titanium alloys compared to stainless steel: blown powder sintering; reduced melt-pool wetting due to the sinter; and pore pushing in the melt-pool. The former two directly increase lack of fusion porosity, while the later causes end of track porosity. Each phenomenon influences the melt-pool characteristics, wetting of the substrate and hence build efficacy and undesirable microstructural feature formation. We demonstrate that porosity is related to powder characteristics, pool flow, and solidification front morphology. Our results clarify DED-AM process dynamics, illustrating why each alloy builds differently, facilitating the wider application of additive manufacturing to new materials.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Measurement of swelling-induced residual stress in ion implanted SiC, and its effect on micromechanical properties
Authors:
Alexander J. Leide,
Richard I. Todd,
David E. J. Armstrong
Abstract:
Ion implantation is widely used as a surrogate for neutron irradiation in the investigation of radiation damage on the properties of materials. Due to the small depth of damage, micromechanical methods must be used to extract material properties. In this work, nanoindentation has been applied to ion irradiated silicon carbide to extract radiation-induced hardening. Residual stress is evaluated usi…
▽ More
Ion implantation is widely used as a surrogate for neutron irradiation in the investigation of radiation damage on the properties of materials. Due to the small depth of damage, micromechanical methods must be used to extract material properties. In this work, nanoindentation has been applied to ion irradiated silicon carbide to extract radiation-induced hardening. Residual stress is evaluated using HR-EBSD, AFM swelling measurements, and a novel microcantilever relaxation technique coupled with finite element modelling. Large compressive residual stresses of several GPa are found in the irradiated material, which contribute to the significant hardening observed in nanoindentation measurements. The origin of these residual stresses and the associated hardening is the unirradiated substrate which constrains radiation swelling. Comparisons with other materials susceptible to irradiation swelling show that this effect should not be neglected in studying the effects of ion irradiation damage on mechanical properties. This constraint may also be influencing fundamental radiation defects. This has significant implications for the suitability of ion implantation as a surrogate for neutron irradiations. These results demonstrate the significance of swelling-induced residual stresses in nuclear reactor components, and the impact on structural integrity of reactor components.
△ Less
Submitted 30 April, 2020;
originally announced April 2020.
-
Raman spectroscopy of ion irradiated SiC: chemical defects, strain, annealing, and oxidation
Authors:
Alexander J. Leide,
Matthew J. Lloyd,
Richard I. Todd,
David E. J. Armstrong
Abstract:
Raman spectroscopy has been used to identify defective bonding in neon and silicon ion irradiated single crystals of 6H-SiC. Observable differences exist in the C-C bonding region corresponding to different defect structures for neon and silicon ion implantations. Raman spectra of ion irradiated SiC show less tensile strain than neutron irradiations, explained by a residual compressive stress caus…
▽ More
Raman spectroscopy has been used to identify defective bonding in neon and silicon ion irradiated single crystals of 6H-SiC. Observable differences exist in the C-C bonding region corresponding to different defect structures for neon and silicon ion implantations. Raman spectra of ion irradiated SiC show less tensile strain than neutron irradiations, explained by a residual compressive stress caused by the swelling constrained by the undamaged substrate. Evidence of oxidation during high temperature ion implantation is observed as C-O and Si-O Raman signals. Annealing irradiated SiC while acquiring Raman spectra shows rapid recovery of Si-C bonding, but not a complete recovery of the unirradiated structure. Annealing irradiated SiC causes surface oxidation where unirradiated SiC does not oxidise. Comparisons are made to the apparent radiation resistance of diamond and silicon which have similar crystal structures, but are monatomic, leading to the suggestion that chemical defects are responsible for increased radiation damage in SiC.
△ Less
Submitted 2 July, 2020; v1 submitted 29 April, 2020;
originally announced April 2020.
-
Warren-Averbach line broadening analysis from a time of flight neutron diffractometer
Authors:
David M. Collins,
Angus J. Wilkinson,
Richard I. Todd
Abstract:
The well known Warren-Averbach theory of diffraction line profile broadening is shown to be applicable to time of flight data obtained from a neutron spallation source. Without modification, the method is applied to two very different examples; a cold worked ferritic steel and a thermally stressed alumina-30% SiC composite. Values of root mean square strains averaged over a range of lengths for th…
▽ More
The well known Warren-Averbach theory of diffraction line profile broadening is shown to be applicable to time of flight data obtained from a neutron spallation source. Without modification, the method is applied to two very different examples; a cold worked ferritic steel and a thermally stressed alumina-30% SiC composite. Values of root mean square strains averaged over a range of lengths for the ferritic steel were used to estimate dislocation densities; values were found to be in good agreement with geometrically necessary dislocation densities independently measured from similarly orientated grains measured from electron backscatter diffraction analysis. An analytical model for the ceramic is described to validate the estimate of root mean square strain.
△ Less
Submitted 28 July, 2019;
originally announced July 2019.
-
The Next Generation Transit Survey - Prototy** Phase
Authors:
James McCormac,
Don Pollacco,
Peter Wheatley,
Richard West,
Simon Walker,
Joao Bento,
Ian Skillen,
Francesca Faedi,
Matt Burleigh,
Sarah Casewell,
Bruno Chazelas,
Ludovic Genolet,
Neale Gibson,
Mike Goad,
Katherine Lawrie,
Robert Ryans,
Ian Todd,
Stephan Udry,
Christopher Watson
Abstract:
We present the prototype telescope for the Next Generation Transit Survey, which was built in the UK in 2008/09 and tested on La Palma in the Canary Islands in 2010. The goals for the prototype system were severalfold: to determine the level of systematic noise in an NGTS-like system; demonstrate that we can perform photometry at the (sub) millimagnitude level on transit timescales across a wide f…
▽ More
We present the prototype telescope for the Next Generation Transit Survey, which was built in the UK in 2008/09 and tested on La Palma in the Canary Islands in 2010. The goals for the prototype system were severalfold: to determine the level of systematic noise in an NGTS-like system; demonstrate that we can perform photometry at the (sub) millimagnitude level on transit timescales across a wide field; show that it is possible to detect transiting super-Earth and Neptune-sized exoplanets and prove the technical feasibility of the proposed planet survey. We tested the system for around 100 nights and met each of the goals above. Several key areas for improvement were highlighted during the prototy** phase. They have been subsequently addressed in the final NGTS facility which was recently commissioned at ESO Cerro Paranal, Chile.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
A Mathematical Model for Flash Sintering
Authors:
Andrew A. Lacey,
Ian J. Hewitt,
Richard I. Todd
Abstract:
A mathematical model is presented for the Joule heating that occurs in a ceramic powder compact during the process of flash sintering. The ceramic is assumed to have an electrical conductivity that increases with temperature, and this leads to the possibility of runaway heating that could facilitate and explain the rapid sintering seen in experiments. We consider reduced models that are sufficient…
▽ More
A mathematical model is presented for the Joule heating that occurs in a ceramic powder compact during the process of flash sintering. The ceramic is assumed to have an electrical conductivity that increases with temperature, and this leads to the possibility of runaway heating that could facilitate and explain the rapid sintering seen in experiments. We consider reduced models that are sufficiently simple to enable concrete conclusions to be drawn about the mathematical nature of their solutions. In particular we discuss how different local and non-local reaction terms, which arise from specified experimental conditions of fixed voltage and current, lead to thermal runaway or to stable conditions. We identify incipient thermal runaway as a necessary condition for the flash event, and hence identify the conditions under which this is likely to occur.
△ Less
Submitted 14 December, 2015;
originally announced December 2015.
-
On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures
Authors:
A. Amendola,
E. Hernandez-Nava,
R. Goodall,
I. Todd,
R. E. Skelton,
F. Fraternali
Abstract:
An investigation on the additive manufacturing and the experimental testing of 3D models of tensegrity prisms and columns is presented. An electron beam melting facility (Arcam EBM S12) is employed to 3D print structures composed of tensegrity prisms endowed with rigid bases and temporary supports, which are made out of the titanium alloy Ti6Al4V. The temporary supports are removed after the addit…
▽ More
An investigation on the additive manufacturing and the experimental testing of 3D models of tensegrity prisms and columns is presented. An electron beam melting facility (Arcam EBM S12) is employed to 3D print structures composed of tensegrity prisms endowed with rigid bases and temporary supports, which are made out of the titanium alloy Ti6Al4V. The temporary supports are removed after the additive manufacturing phase, when Spectra cross-strings are added to the 3D printed models, and a suitable state of internal prestress is applied to the structure. The experimental part of the study shows that the examined structures feature sitffening-type elastic response under large or moderately large axial strains induced by compressive loading. Such a geometrically nonlinear behavior confirms previous theoretical results available in the literature, and paves the way to the use of tensegrity prisms and columns as innovative mechanical metamaterials and smart devices.
△ Less
Submitted 5 April, 2015;
originally announced April 2015.
-
A Search for Photometric Variability Towards M71 with the Near-Infrared Transiting ExoplanetS Telescope
Authors:
J. McCormac,
I. Skillen,
D. Pollacco,
F. Faedi,
G. Ramsay,
V. S. Dhillon,
I. Todd,
A. Gonzalez
Abstract:
We present the results of a high-cadence photometric survey of an $11'\times11'$ field centred on the globular cluster M71, with the Near-Infrared Transiting ExoplanetS Telescope. The aim of our survey is to search for stellar variability and transiting giant exoplanets. This survey differs from previous photometric surveys of M71 in that it is more sensitive to lower amplitude ($ΔM\leq0.02$ mag)…
▽ More
We present the results of a high-cadence photometric survey of an $11'\times11'$ field centred on the globular cluster M71, with the Near-Infrared Transiting ExoplanetS Telescope. The aim of our survey is to search for stellar variability and transiting giant exoplanets. This survey differs from previous photometric surveys of M71 in that it is more sensitive to lower amplitude ($ΔM\leq0.02$ mag) and longer period ($P>2$ d) variability than previous work on this cluster. We have discovered $17$ new variable stars towards M71 and confirm the nature of $13$ previously known objects, for which the orbital periods of $7$ are refined or newly determined. Given the photometric precision of our high-cadence survey on the horizontal branch of M71, we confirm the cluster is devoid of RR Lyrae variable stars within the area surveyed. We present new $B$ and $V$ band photometry of the stars in our sample from which we estimate spectral types of the variable objects. We also search our survey data for transiting hot Jupiters and present simulations of the expected number of detections. Approximately $1\,000$ stars were observed on the main-sequence of M71 with sufficient photometric accuracy to detect a transiting hot Jupiter, however none were found.
△ Less
Submitted 20 December, 2013;
originally announced December 2013.
-
DONUTS: A science frame autoguiding algorithm with sub-pixel precision, capable of guiding on defocused stars
Authors:
J. McCormac,
D. Pollacco,
I. Skillen,
F. Faedi,
I. Todd,
C. A. Watson
Abstract:
We present the DONUTS autoguiding algorithm, designed to fix stellar positions at the sub-pixel level for high-cadence time-series photometry, which is also capable of autoguiding on defocused stars. DONUTS was designed to calculate guide corrections from a series of science images and re-centre telescope pointing between each exposure. The algorithm has the unique ability of calculating guide cor…
▽ More
We present the DONUTS autoguiding algorithm, designed to fix stellar positions at the sub-pixel level for high-cadence time-series photometry, which is also capable of autoguiding on defocused stars. DONUTS was designed to calculate guide corrections from a series of science images and re-centre telescope pointing between each exposure. The algorithm has the unique ability of calculating guide corrections from under-sampled to heavily defocused point spread functions. We present the case for why such an algorithm is important for high precision photometry and give our results from off and on-sky testing. We discuss the limitations of DONUTS and the facilities where it soon will be deployed.
△ Less
Submitted 8 April, 2013;
originally announced April 2013.
-
Period and period change measurements for 143 SuperWASP eclipsing binary candidates near the short-period limit and discovery of a doubly eclipsing quadruple system
Authors:
M. E. Lohr,
A. J. Norton,
U. C. Kolb,
P. F. L. Maxted,
I. Todd,
R. G. West
Abstract:
Building on previous work, a new search of the SuperWASP archive was carried out to identify eclipsing binary systems near the short-period limit. 143 candidate objects were detected with orbital periods between 16000 and 20000 s, of which 97 are new discoveries. Period changes significant at 1 sigma or more were detected in 74 of these objects, and in 38 the changes were significant at 3 sigma or…
▽ More
Building on previous work, a new search of the SuperWASP archive was carried out to identify eclipsing binary systems near the short-period limit. 143 candidate objects were detected with orbital periods between 16000 and 20000 s, of which 97 are new discoveries. Period changes significant at 1 sigma or more were detected in 74 of these objects, and in 38 the changes were significant at 3 sigma or more. The significant period changes observed followed an approximately normal distribution with a half-width at half-maximum of ~0.1 s/yr. There was no apparent relationship between period length and magnitude or direction of period change. Amongst several interesting individual objects studied, 1SWASP J093010.78+533859.5 is presented as a new doubly eclipsing quadruple system, consisting of a contact binary with a 19674.575 s period and an Algol-type binary with a 112799.109 s period, separated by 66.1 AU, being the sixth known system of this type.
△ Less
Submitted 21 November, 2012; v1 submitted 25 October, 2012;
originally announced October 2012.
-
A Trapped Field of >3T in Bulk MgB2 Fabricated by Uniaxial Hot Pressing
Authors:
J. H. Durrell,
C. E. J. Dancer,
A. Dennis,
Y. Shi,
Z. Xu,
A. M. Campbell,
N. H. Babu,
R. I. Todd,
C. R. M. Grovenor,
D. A. Cardwell
Abstract:
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data…
▽ More
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data using the Biot-Savart law is consistent with the measured local critical current density. From this we conclude that critical current density, and therefore trapped field performance, is limited by the flux pinning available in MgB2, rather than by lack of connectivity. This suggests strongly that both increasing sample size and enhancing pinning through do** will allow further increases in trapped field performance of bulk MgB2.
△ Less
Submitted 28 September, 2012; v1 submitted 30 July, 2012;
originally announced July 2012.
-
WASP-44b, WASP-45b and WASP-46b: three short-period, transiting extrasolar planets
Authors:
D. R. Anderson,
A. Collier Cameron,
M. Gillon,
C. Hellier,
E. Jehin,
M. Lendl,
P. F. L. Maxted,
D. Queloz,
B. Smalley,
A. M. S. Smith,
A. H. M. J. Triaud,
R. G. West,
F. Pepe,
D. Pollacco,
D. Ségransan,
I. Todd,
S. Udry
Abstract:
We report the discovery of three extrasolar planets that transit their moderately bright (Vmag = 12-13) host stars. WASP-44b is a 0.89-MJup planet in a 2.42-day orbit around a G8V star. WASP-45b is a 1.03-MJup planet which passes in front of the limb of its K2V host star every 3.13 days. Weak Ca II H+K emission seen in the spectra of WASP-45 suggests the star is chromospherically active. WASP-46b…
▽ More
We report the discovery of three extrasolar planets that transit their moderately bright (Vmag = 12-13) host stars. WASP-44b is a 0.89-MJup planet in a 2.42-day orbit around a G8V star. WASP-45b is a 1.03-MJup planet which passes in front of the limb of its K2V host star every 3.13 days. Weak Ca II H+K emission seen in the spectra of WASP-45 suggests the star is chromospherically active. WASP-46b is a 2.10-MJup planet in a 1.43-day orbit around a G6V star. Rotational modulation of the light curves of WASP-46 and weak Ca II H+K emission in its spectra show the star to be photospherically and chromospherically active.
We imposed circular orbits in our analyses as the radial velocity data are consistent with (near-)circular orbits, as could be expected from both empirical and tidal-theory perspectives for such short-period, Jupiter-mass planets. We discuss the impact of fitting for eccentric orbits for such planets when not supported by the data. The derived planetary and stellar radii depend on the fitted eccentricity and these parameters inform intense theoretical efforts concerning tidal circularisation and heating, bulk planetary composition and the observed systematic errors in planetary and stellar radii. As such, we recommend exercising caution in fitting the orbits of short period, Jupiter-mass planets with an eccentric model when there is no evidence of non-circularity.
△ Less
Submitted 29 April, 2012; v1 submitted 16 May, 2011;
originally announced May 2011.
-
WASP-40b: independent discovery of the 0.6-Mjup transiting exoplanet HAT-P-27b
Authors:
D. R. Anderson,
S. C. C. Barros,
I. Boisse,
F. Bouchy,
A. Collier-Cameron,
F. Faedi,
G. Hebrard,
C. Hellier,
M. Lendl,
C. Moutou,
D. Pollacco,
A. Santerne,
B. Smalley,
A. M. S. Smith,
I. Todd,
A. H. M. J. Triaud,
R. G. West,
P. J. Wheatley,
J. Bento,
B. Enoch,
M. Gillon,
P. F. L. Maxted,
J. McCormac,
D. Queloz,
E. K. Simpson
, et al. (1 additional authors not shown)
Abstract:
From WASP photometry and SOPHIE radial velocities we report the discovery of WASP-40b (HAT-P-27b), a 0.6 Mjup planet that transits its 12th magnitude host star every 3.04 days. The host star is of late G-type or early K-type and likely has a metallicity greater than solar ([Fe/H] = 0.14 +/- 0.11). The planet's mass and radius are typical of the known hot Jupiters, thus adding another system to the…
▽ More
From WASP photometry and SOPHIE radial velocities we report the discovery of WASP-40b (HAT-P-27b), a 0.6 Mjup planet that transits its 12th magnitude host star every 3.04 days. The host star is of late G-type or early K-type and likely has a metallicity greater than solar ([Fe/H] = 0.14 +/- 0.11). The planet's mass and radius are typical of the known hot Jupiters, thus adding another system to the apparent pileup of transiting planets with periods near 3 to 4 days. Our parameters match those of the recent HATnet announcement of the same planet, thus giving confidence in the techniques used. We report a possible indication of stellar activity in the host star.
△ Less
Submitted 11 May, 2011; v1 submitted 24 January, 2011;
originally announced January 2011.
-
Stellar variability on time-scales of minutes: results from the first 5 years of the Rapid Temporal Survey (RATS)
Authors:
Thomas Barclay,
Gavin Ramsay,
Pasi Hakala,
Ralf Napiwotzki,
Gijs Nelemans,
Stephen Potter,
Ian Todd
Abstract:
The Rapid Temporal Survey (RATS) explores the faint, variable sky. Our observations search a parameter space which, until now, has never been exploited from the ground. Our strategy involves observing the sky close to the Galactic plane with wide-field CCD cameras. An exposure is obtained approximately every minute with the total observation of each field lasting around 2 hours. In this paper we p…
▽ More
The Rapid Temporal Survey (RATS) explores the faint, variable sky. Our observations search a parameter space which, until now, has never been exploited from the ground. Our strategy involves observing the sky close to the Galactic plane with wide-field CCD cameras. An exposure is obtained approximately every minute with the total observation of each field lasting around 2 hours. In this paper we present the first 6 epochs of observations which were taken over 5 years from 2003--2008 and cover over 31 square degrees of which 16.2 is within 10° of the Galactic plane. The number of stars contained in these data is over 3.0 x10^6. We have developed a method of combining the output of two variability tests in order to detect variability on time-scales ranging from a few minutes to a few hours. Using this technique we find 1.2 x 10^5 variables -- equal to 4.1 per cent of stars in our data. Follow-up spectroscopic observations have allowed us to identify the nature of a fraction of these sources. These include a pulsating white dwarf which appears to have a hot companion, a number of stars with A-type spectra that vary on a period in the range 20--35 min. Our primary goal is the discovery of new AM CVn systems: we find 66 sources which appear to show periodic modulation on a time-scales less than 40 min and a colour consistent with the known AM CVn systems. Of those sources for which we have spectra of, none appears to be an AM CVn system, although we have 12 candidate AM CVn systems with periods less than 25 min for which spectra are still required. Although our numbers are not strongly constraining, they are consistent with the predictions of Nelemans et al.
△ Less
Submitted 12 January, 2011;
originally announced January 2011.
-
WASP-30b: a 61 Mjup brown dwarf transiting a V=12, F8 star
Authors:
D. R. Anderson,
A. Collier Cameron,
C. Hellier,
M. Lendl,
P. F. L. Maxted,
D. Pollacco,
D. Queloz,
B. Smalley,
A. M. S. Smith,
I. Todd,
A. H. M. J. Triaud,
R. G. West,
S. C. C. Barros,
B. Enoch,
M. Gillon,
T. A. Lister,
F. Pepe,
D. Ségransan,
R. A. Street,
S. Udry
Abstract:
We report the discovery of a 61-Jupiter-mass brown dwarf, which transits its F8V host star, WASP-30, every 4.16 days. From a range of age indicators we estimate the system age to be 1-2 Gyr. We derive a radius (0.89 +/- 0.02 RJup) for the companion that is consistent with that predicted (0.914 RJup) by a model of a 1-Gyr-old, non-irradiated brown dwarf with a dusty atmosphere. The location of WASP…
▽ More
We report the discovery of a 61-Jupiter-mass brown dwarf, which transits its F8V host star, WASP-30, every 4.16 days. From a range of age indicators we estimate the system age to be 1-2 Gyr. We derive a radius (0.89 +/- 0.02 RJup) for the companion that is consistent with that predicted (0.914 RJup) by a model of a 1-Gyr-old, non-irradiated brown dwarf with a dusty atmosphere. The location of WASP-30b in the minimum of the mass-radius relation is consistent with the quantitative prediction of Chabrier & Baraffe (2000), thus confirming the theory.
△ Less
Submitted 3 December, 2010; v1 submitted 14 October, 2010;
originally announced October 2010.
-
WASP-38b: A Transiting Exoplanet in an Eccentric, 6.87d Period Orbit
Authors:
S. C. C. Barros,
F. Faedi,
A. Collier Cameron,
T. A. Lister,
J. McCormac,
D. Pollacco,
E. K. Simpson,
B. Smalley,
R. A. Street,
I. Todd,
A. H. M. J. Triaud,
I. Boisse,
F. Bouchy,
G. Hebrard,
C. Moutou,
F. Pepe,
D. Queloz,
A. Santerne,
D. Segransan,
S. Udry,
J. Bento,
O. W. Butters,
B. Enoch,
C. A. Haswell,
C. Hellier
, et al. (9 additional authors not shown)
Abstract:
We report the discovery of WASP-38b, a long period transiting planet in an eccentric 6.871815 day orbit. The transit epoch is 2455335.92050 +/- 0.00074 (HJD) and the transit duration is 4.663 hours. WASP-38b's discovery was enabled due to an upgrade to the SuperWASP-North cameras. We performed a spectral analysis of the host star HD 146389/BD+10 2980 that yielded Teff = 6150 +/- 80K, logg =4.3 +/-…
▽ More
We report the discovery of WASP-38b, a long period transiting planet in an eccentric 6.871815 day orbit. The transit epoch is 2455335.92050 +/- 0.00074 (HJD) and the transit duration is 4.663 hours. WASP-38b's discovery was enabled due to an upgrade to the SuperWASP-North cameras. We performed a spectral analysis of the host star HD 146389/BD+10 2980 that yielded Teff = 6150 +/- 80K, logg =4.3 +/- 0.1, vsini=8.6 +/- 0.4 km/s, M*=1.16 +/- 0.04 Msun and R* =1.33 +/- 0.03 Rsun, consistent with a dwarf of spectral type F8. Assuming a main-sequence mass-radius relation for the star, we fitted simultaneously the radial velocity variations and the transit light curves to estimate the orbital and planetary parameters. The planet has a mass of 2.69 +/- 0.06 Mjup and a radius of 1.09 +/-0.03 Rjup giving a density, rho_p = 2.1 +/-0.1 rho_jup. The high precision of the eccentricity e=0.0314 +/- 0.0044 is due to the relative transit timing from the light curves and the RV shape. The planet equilibrium temperature is estimated at 1292 +/- 33K. WASP-38b is the longest period planet found by SuperWASP-North and with a bright host star (V =9.4 mag), is a good candidate for followup atmospheric studies.
△ Less
Submitted 27 October, 2010; v1 submitted 5 October, 2010;
originally announced October 2010.
-
The first WASP public data release
Authors:
O. W. Butters,
R. G. West,
D. R. Anderson,
A. Collier Cameron,
W. I. Clarkson,
B. Enoch,
C. A. Haswell,
C. Hellier,
K. Horne,
Y. Joshi,
S. R. Kane,
T. A. Lister,
P. F. L. Maxted,
N. Parley,
D. Pollacco,
B. Smalley,
R. A. Street,
I. Todd,
P. J. Wheatley,
D. M. Wilson
Abstract:
The WASP (Wide Angle Search for Planets) project is an exoplanet transit survey that has been automatically taking wide field images since 2004. Two instruments, one in La Palma and the other in South Africa, continually monitor the night sky, building up light curves of millions of unique objects. These light curves are used to search for the characteristics of exoplanetary transits. This first p…
▽ More
The WASP (Wide Angle Search for Planets) project is an exoplanet transit survey that has been automatically taking wide field images since 2004. Two instruments, one in La Palma and the other in South Africa, continually monitor the night sky, building up light curves of millions of unique objects. These light curves are used to search for the characteristics of exoplanetary transits. This first public data release (DR1) of the WASP archive makes available all the light curve data and images from 2004 up to 2008 in both the Northern and Southern hemispheres. A web interface (www.wasp.le.ac.uk/public/) to the data allows easy access over the Internet. The data set contains 3 631 972 raw images and 17 970 937 light curves. In total the light curves have 119 930 299 362 data points available between them.
△ Less
Submitted 27 September, 2010;
originally announced September 2010.
-
Independent discovery and refined parameters of the transiting exoplanet HAT-P-14b
Authors:
E. K. Simpson,
S. C. C. Barros,
D. J. A. Brown,
A. Collier Cameron,
D. Pollacco,
I. Skillen,
H. C. Stempels,
I. Boisse,
F. Faedi,
G. Hebrard,
J. McCormac,
P. Sorensen,
R. A. Street,
J. Bento,
F. Bouchy,
O. W. Butters,
B. Enoch,
C. A. Haswell,
L. Hebb,
S. Holmes,
K. Horne,
F. P. Keenan,
T. A. Lister,
G. R. M. Miller,
V. Moulds
, et al. (8 additional authors not shown)
Abstract:
We present SuperWASP observations of HAT-P-14b, a hot Jupiter discovered by Torres et al. The planet was found independently by the SuperWASP team and named WASP-27b after follow-up observations had secured the discovery, but prior to the publication by Torres et al. Our analysis of HAT-P-14/WASP-27 is in good agreement with the values found by Torres et al. and we refine the parameters by combini…
▽ More
We present SuperWASP observations of HAT-P-14b, a hot Jupiter discovered by Torres et al. The planet was found independently by the SuperWASP team and named WASP-27b after follow-up observations had secured the discovery, but prior to the publication by Torres et al. Our analysis of HAT-P-14/WASP-27 is in good agreement with the values found by Torres et al. and we refine the parameters by combining our datasets. We also provide additional evidence against astronomical false positives. Due to the brightness of the host star, V = 10, HAT-P-14 is an attractive candidate for further characterisation observations. The planet has a high impact parameter, b = 0.907 +/- 0.004, and the primary transit is close to grazing. This could readily reveal small deviations in the orbital parameters indicating the presence of a third body in the system, which may be causing the small but significant orbital eccentricity, e = 0.095 +/- 0.011. The system geometry suggests that the planet narrowly fails to undergo a secondary eclipse. However, even a non-detection would tightly constrain the system parameters.
△ Less
Submitted 17 September, 2010;
originally announced September 2010.
-
WASP-37b: a 1.8 MJ exoplanet transiting a metal-poor star
Authors:
E. K. Simpson,
F. Faedi,
S. C. C. Barros,
D. J. A. Brown,
A. Collier Cameron,
L. Hebb,
D. Pollacco,
B. Smalley,
I. Todd,
O. W. Butters,
G. Hebrard,
J. McCormac,
G. R. M. Miller,
A. Santerne,
R. A. Street,
I. Skillen,
A. H. M. J. Triaud,
D. R. Anderson,
J. Bento,
I. Boisse,
F. Bouchy,
B. Enoch,
C. A. Haswell,
C. Hellier,
S. Holmes
, et al. (17 additional authors not shown)
Abstract:
We report on the discovery of WASP-37b, a transiting hot Jupiter orbiting a mv = 12.7 G2-type dwarf, with a period of 3.577471 \pm 0.00001 d, transit epoch T0 = 2455338.6188 \pm 0.0006 (HJD), and a transit duration 0.1304 \pm 0.0018 d. The planetary companion has a mass Mp = 1.80 \pm 0.17 MJ and radius Rp = 1.16 \pm 0.07 RJ, yielding a mean density of 1.15 \pm 0.15 times that of Jupiter. From a sp…
▽ More
We report on the discovery of WASP-37b, a transiting hot Jupiter orbiting a mv = 12.7 G2-type dwarf, with a period of 3.577471 \pm 0.00001 d, transit epoch T0 = 2455338.6188 \pm 0.0006 (HJD), and a transit duration 0.1304 \pm 0.0018 d. The planetary companion has a mass Mp = 1.80 \pm 0.17 MJ and radius Rp = 1.16 \pm 0.07 RJ, yielding a mean density of 1.15 \pm 0.15 times that of Jupiter. From a spectral analysis and comparisons with stellar models, we find the host star has M* = 0.925 \pm 0.120 Msun, R* = 1.003 \pm 0.053 Rsun, Teff = 5800 \pm 150 K and [Fe/H] = -0.40 \pm 0.12. WASP-37 is therefore one of the lowest metallicity stars to host a transiting planet.
△ Less
Submitted 1 October, 2010; v1 submitted 18 August, 2010;
originally announced August 2010.
-
A transit timing analysis of seven RISE light curves of the exoplanet system HAT-P-3
Authors:
N. P. Gibson,
D. Pollacco,
S. Barros,
C. Benn,
D. Christian,
M. Hrudková,
Y. C. Joshi,
F. P. Keenan,
E. K. Simpson,
I. Skillen,
I. A. Steele,
I. Todd
Abstract:
We present seven light curves of the exoplanet system HAT-P-3, taken as part of a transit timing program using the RISE instrument on the Liverpool Telescope. The light curves are analysed using a Markov-Chain Monte-Carlo algorithm to update the parameters of the system. The inclination is found to be i = 86.75^{+0.22}_{-0.21} deg, the planet-star radius ratio to be R_p/R_star = 0.1098^{+0.0010}…
▽ More
We present seven light curves of the exoplanet system HAT-P-3, taken as part of a transit timing program using the RISE instrument on the Liverpool Telescope. The light curves are analysed using a Markov-Chain Monte-Carlo algorithm to update the parameters of the system. The inclination is found to be i = 86.75^{+0.22}_{-0.21} deg, the planet-star radius ratio to be R_p/R_star = 0.1098^{+0.0010}_{-0.0012}, and the stellar radius to be R_star = 0.834^{+0.018}_{-0.026} R_sun, consistent with previous results but with a significant improvement in the precision. Central transit times and uncertainties for each light curve are also determined, and a residual permutation algorithm used as an independent check on the errors. The transit times are found to be consistent with a linear ephemeris, and a new ephemeris is calculated as T_c(0) = 2454856.70118 +- 0.00018 HJD and P = 2.899738 +- 0.000007 days. Model timing residuals are fitted to the measured timing residuals to place upper mass limits for a hypothetical perturbing planet as a function of the period ratio. These show that we have probed for planets with masses as low as 0.33 M_earth and 1.81 M_earth in the interior and exterior 2:1 resonances, respectively, assuming the planets are initially in circular orbits.
△ Less
Submitted 25 September, 2009; v1 submitted 23 September, 2009;
originally announced September 2009.
-
WASP-16b: A new Jupiter-like planet transiting a southern solar analog
Authors:
T. A. Lister,
D. R. Anderson,
M. Gillon,
L. Hebb,
B. S. Smalley,
A. H. M. J. Triaud,
A. Collier Cameron,
D. M. Wilson,
R. G. West,
S. J. Bentley,
D. J. Christian,
R. Enoch,
C. A. Haswell,
C. Hellier,
K. Horne,
J. Irwin,
Y. C. Joshi,
S. R. Kane,
M. Mayor,
P. F. L. Maxted,
A. J. Norton,
N. Parley,
F. Pepe,
D. Pollacco,
D. Queloz
, et al. (7 additional authors not shown)
Abstract:
We report the discovery from WASP-South of a new Jupiter-like extrasolar planet, WASP-16b, which transits its solar analog host star every 3.12 days. Analysis of the transit photometry and radial velocity spectroscopic data leads to a planet with R_p = 1.008+-0.071 R_Jup and M_p =0.855+-0.059 M_Jup, orbiting a host star with R_* = 0.946+-0.054 R_sun and M_* = 1.022+-0.101 M_sun. Comparison of th…
▽ More
We report the discovery from WASP-South of a new Jupiter-like extrasolar planet, WASP-16b, which transits its solar analog host star every 3.12 days. Analysis of the transit photometry and radial velocity spectroscopic data leads to a planet with R_p = 1.008+-0.071 R_Jup and M_p =0.855+-0.059 M_Jup, orbiting a host star with R_* = 0.946+-0.054 R_sun and M_* = 1.022+-0.101 M_sun. Comparison of the high resolution stellar spectrum with synthetic spectra and stellar evolution models indicates the host star is a near-solar metallicity ([Fe/H]= 0.01+-0.10) solar analog (Teff = 5700+-150 K, log g= 4.5+-0.2) of intermediate age (Tau = 2.3+5.8-2.2 Gyr).
△ Less
Submitted 3 August, 2009;
originally announced August 2009.
-
A transit timing analysis of nine RISE light curves of the exoplanet system TrES-3
Authors:
N. P. Gibson,
D. Pollacco,
I. Skillen,
E. K. Simpson,
S. Barros,
Y. C. Joshi,
I. Todd,
C. Benn,
D. Christian,
M. Hrudková,
F. P. Keenan,
I. A. Steele
Abstract:
We present nine newly observed transits of TrES-3, taken as part of a transit timing program using the RISE instrument on the Liverpool Telescope. A Markov-Chain Monte-Carlo analysis was used to determine the planet-star radius ratio and inclination of the system, which were found to be Rp/Rstar=0.1664^{+0.0011}_{-0.0018} and i = 81.73^{+0.13}_{-0.04} respectively, consistent with previous resul…
▽ More
We present nine newly observed transits of TrES-3, taken as part of a transit timing program using the RISE instrument on the Liverpool Telescope. A Markov-Chain Monte-Carlo analysis was used to determine the planet-star radius ratio and inclination of the system, which were found to be Rp/Rstar=0.1664^{+0.0011}_{-0.0018} and i = 81.73^{+0.13}_{-0.04} respectively, consistent with previous results. The central transit times and uncertainties were also calculated, using a residual-permutation algorithm as an independent check on the errors. A re-analysis of eight previously published TrES-3 light curves was conducted to determine the transit times and uncertainties using consistent techniques. Whilst the transit times were not found to be in agreement with a linear ephemeris, giving chi^2 = 35.07 for 15 degrees of freedom, we interpret this to be the result of systematics in the light curves rather than a real transit timing variation. This is because the light curves that show the largest deviation from a constant period either have relatively little out-of-transit coverage, or have clear systematics. A new ephemeris was calculated using the transit times, and was found to be T_c(0) = 2454632.62610 +- 0.00006 HJD and P = 1.3061864 +- 0.0000005 days. The transit times were then used to place upper mass limits as a function of the period ratio of a potential perturbing planet, showing that our data are sufficiently sensitive to have probed for sub-Earth mass planets in both interior and exterior 2:1 resonances, assuming the additional planet is in an initially circular orbit.
△ Less
Submitted 28 May, 2009;
originally announced May 2009.
-
The 0.5M$_J$ transiting exoplanet WASP-13b
Authors:
I. Skillen,
D. Pollacco,
A. Collier Cameron,
L. Hebb,
E. Simpson,
F. Bouchy,
D. J. Christian,
N. P. Gibson,
G. Hébrard,
Y. C. Joshi,
B. Loeillet,
B. Smalley,
H. C. Stempels,
R. A. Street,
S. Udry,
R. G. West,
D. R. Anderson,
S. C. C. Barros,
B. Enoch,
C. A. Haswell,
C. Hellier,
K. Horne,
J. Irwin,
F. P. Keenan,
T. A. Lister
, et al. (10 additional authors not shown)
Abstract:
We report the discovery of WASP-13b, a low-mass $ M_p = 0.46 ^{+ 0.06}_{- 0.05} M_J$ transiting exoplanet with an orbital period of $4.35298 \pm 0.00004$ days. The transit has a depth of 9 mmag, and although our follow-up photometry does not allow us to constrain the impact parameter well ($0 < b < 0.46$), with radius in the range $R_p \sim 1.06 - 1.21 R_J$ the location of WASP-13b in the mass-r…
▽ More
We report the discovery of WASP-13b, a low-mass $ M_p = 0.46 ^{+ 0.06}_{- 0.05} M_J$ transiting exoplanet with an orbital period of $4.35298 \pm 0.00004$ days. The transit has a depth of 9 mmag, and although our follow-up photometry does not allow us to constrain the impact parameter well ($0 < b < 0.46$), with radius in the range $R_p \sim 1.06 - 1.21 R_J$ the location of WASP-13b in the mass-radius plane is nevertheless consistent with H/He-dominated, irradiated, low core mass and core-free theoretical models. The G1V host star is similar to the Sun in mass (M$_{*} = 1.03^{+0.11}_ {- 0.09} M_{\odot}$) and metallicity ([M/H]=$0.0\pm0.2$), but is possibly older ($8.5^{+ 5.5}_{- 4.9}$ Gyr).
△ Less
Submitted 19 May, 2009;
originally announced May 2009.
-
RAT J1953+1859: a dwarf nova discovered through high amplitude QPOs in quiescence
Authors:
Gavin Ramsay,
Pasi Hakala,
Thomas Barclay,
Peter Wheatley,
George Marshall,
Harry Lehto,
Ralf Napiwotzki,
Gijs Nelemans,
Stephen Potter,
Ian Todd
Abstract:
We report the discovery of an accreting binary, RAT J1953+1859, made during the RApid Temporal Survey (RATS) on the Isaac Newton Telescope. It showed high amplitude (0.3 mag) quasi-periodic oscillations on a timescale of ~20 mins. Further observations made using the Nordic Optical Telescope showed it to be ~4 mag brighter than in the discovery images. These photometric observations, together wit…
▽ More
We report the discovery of an accreting binary, RAT J1953+1859, made during the RApid Temporal Survey (RATS) on the Isaac Newton Telescope. It showed high amplitude (0.3 mag) quasi-periodic oscillations on a timescale of ~20 mins. Further observations made using the Nordic Optical Telescope showed it to be ~4 mag brighter than in the discovery images. These photometric observations, together with radial velocity data taken using the William Herschel Telescope, point to an orbital period of ~90 mins. These data suggest that RAT J1953+1859 is a dwarf novae of the SU UMa type. What makes RAT J1953+1859 unusual is that it is the first such system to be discovered as a result of high amplitude QPOs during quiescence. This suggests that high-cadence wide-field surveys could be another means to discover cataclysmic variables as a result of their short period variability.
△ Less
Submitted 27 April, 2009;
originally announced April 2009.
-
Updated parameters for the transiting exoplanet WASP-3b using RISE, a new fast camera for the Liverpool Telescope
Authors:
N. P. Gibson,
D. Pollacco,
E. K. Simpson,
Y. C. Joshi,
I. Todd,
C. Benn,
D. Christian,
M. Hrudková,
F. P. Keenan,
J. Meaburn,
I. Skillen,
I. A. Steele
Abstract:
Some of the first results are reported from RISE - a new fast camera mounted on the Liverpool Telescope primarily designed to obtain high time resolution light curves of transiting extrasolar planets for the purpose of transit timing. A full and partial transit of WASP-3 are presented, and a Monte Carlo Markov Chain analysis is used to update the parameters from the discovery paper. This results…
▽ More
Some of the first results are reported from RISE - a new fast camera mounted on the Liverpool Telescope primarily designed to obtain high time resolution light curves of transiting extrasolar planets for the purpose of transit timing. A full and partial transit of WASP-3 are presented, and a Monte Carlo Markov Chain analysis is used to update the parameters from the discovery paper. This results in a planetary radius of 1.29^{+0.05}_{-0.12} R_J and therefore a density of 0.82^{+0.14}_{-0.09} p_J, consistent with previous results. The inclination is 85.07^{+0.15}_{-0.16} deg, in agreement (but with a significant improvement in the precision) with the previously determined value. Central transit times are found to be consistent with the ephemeris given in the discovery paper. However, a new ephemeris calculated using the longer baseline results in T_c(0) = 2454605.55915 +- 0.00023 HJD and P = 1.846835 +- 0.000002 days.
△ Less
Submitted 20 October, 2008;
originally announced October 2008.
-
RISE: a fast-readout imager for exoplanet transit timing
Authors:
I. A. Steele,
S. D. Bates,
N. Gibson,
F. Keenan,
J. Meaburn,
C. J. Mottram,
D. Pollacco,
I. Todd
Abstract:
By the precise timing of the low amplitude (0.005 - 0.02 magnitude) transits of exoplanets around their parent star it should be possible to infer the presence of other planetary bodies in the system down to Earth-like masses. We describe the design and construction of RISE, a fast-readout frame transfer camera for the Liverpool Telescope designed to carry out this experiment. The results of our…
▽ More
By the precise timing of the low amplitude (0.005 - 0.02 magnitude) transits of exoplanets around their parent star it should be possible to infer the presence of other planetary bodies in the system down to Earth-like masses. We describe the design and construction of RISE, a fast-readout frame transfer camera for the Liverpool Telescope designed to carry out this experiment. The results of our commissioning tests are described as well as the data reduction procedure necessary. We present light curves of two objects, showing that the desired timing and photometric accuracy can be obtained providing that autoguiding is used to keep the target on the same detector pixel for the entire (typically 4 hour) observing run.
△ Less
Submitted 19 September, 2008;
originally announced September 2008.
-
WASP-10b: a 3M_J, gas-giant planet transiting a late-type K star
Authors:
D. J. Christian,
N. P. Gibson,
E. K. Simpson,
R. A. Street,
I. Skillen,
D. Pollacco,
A. Collier Cameron,
Y. C. Joshi,
F. P. Keenan,
H. C. Stempels,
C. A. Haswell,
K. Horne,
D. R. Anderson,
S. Bentley,
F. Bouchy,
W. I. Clarkson,
B. Enoch,
L. Hebb,
G. Hébrard,
C. Hellier,
J. Irwin,
S. R. Kane,
T. A. Lister,
B. Loeillet,
P. Maxted
, et al. (15 additional authors not shown)
Abstract:
We report the discovery of WASP-10b, a new transiting extrasolar planet (ESP) discovered by the WASP Consortium and confirmed using NOT FIES and SOPHIE radial velocity data. A 3.09 day period, 29 mmag transit depth, and 2.36 hour duration are derived for WASP-10b using WASP and high precision photometric observations. Simultaneous fitting to the photometric and radial velocity data using a Marko…
▽ More
We report the discovery of WASP-10b, a new transiting extrasolar planet (ESP) discovered by the WASP Consortium and confirmed using NOT FIES and SOPHIE radial velocity data. A 3.09 day period, 29 mmag transit depth, and 2.36 hour duration are derived for WASP-10b using WASP and high precision photometric observations. Simultaneous fitting to the photometric and radial velocity data using a Markov-chain Monte Carlo procedure leads to a planet radius of 1.28R_J, a mass of 2.96M_J and eccentricity of ~0.06. WASP-10b is one of the more massive transiting ESPs, and we compare its characteristics to the current sample of transiting ESP, where there is currently little information for masses greater than ~2M_J and non-zero eccentricities. WASP-10's host star, GSC 2752-00114 (USNO-B1.0 1214-0586164) is among the fainter stars in the WASP sample, with V=12.7 and a spectral type of K5. This result shows promise for future late-type dwarf star surveys.
△ Less
Submitted 31 October, 2008; v1 submitted 9 June, 2008;
originally announced June 2008.
-
WASP-14b: 7.3 Mj transiting planet in an eccentric orbit
Authors:
Y. C. Joshi,
D. Pollacco,
A. Collier Cameron,
I. Skillen,
E. Simpson,
I. Steele,
R. A. Street,
H. C. Stempels,
D. J. Christian,
L. Hebb,
F. Bouchy,
N. P. Gibson,
G. Hebrard,
F. P. Keenan,
B. Loeillet,
J. Meaburn,
C. Moutou,
B. Smalley,
I. Todd,
R. G. West,
D. Anderson,
S. Bentley,
B. Enoch,
C. A. Haswell,
C. Hellier
, et al. (16 additional authors not shown)
Abstract:
We report the discovery of a 7.3 Mjup exoplanet WASP-14b, one of the most massive transiting exoplanets observed to date. The planet orbits the tenth-magnitude F5V star USNO-B1 11118-0262485 with a period of 2.243752 days and orbital eccentricity e = 0.09. A simultaneous fit of the transit light curve and radial velocity measurements yields a planetary mass of 7.3+/-0.5 Mjup and a radius of 1.28…
▽ More
We report the discovery of a 7.3 Mjup exoplanet WASP-14b, one of the most massive transiting exoplanets observed to date. The planet orbits the tenth-magnitude F5V star USNO-B1 11118-0262485 with a period of 2.243752 days and orbital eccentricity e = 0.09. A simultaneous fit of the transit light curve and radial velocity measurements yields a planetary mass of 7.3+/-0.5 Mjup and a radius of 1.28+/-0.08 Rjup. This leads to a mean density of about 4.6 g/cm^3 making it densest transiting exoplanets yet found at an orbital period less than 3 days. We estimate this system to be at a distance of 160+/-20 pc. Spectral analysis of the host star reveals a temperature of 6475+/-100 K, log g = 4.07 cm/s^2 and vsin i = 4.9+/-1.0 km/s, and also a high lithium abundance, log N(Li} = 2.84+/-0.05. The stellar density, effective temperature and rotation rate suggest an age for the system of about 0.5-1.0 Gyr.
△ Less
Submitted 31 October, 2008; v1 submitted 9 June, 2008;
originally announced June 2008.
-
WASP-7: The brightest transiting-exoplanet system in the Southern hemisphere
Authors:
Coel Hellier,
D. R. Anderson,
M. Gillon,
T. A. Lister,
P. F. L. Maxted,
D. Queloz,
B. Smalley,
A. Triaud,
R. G. West,
D. M. Wilson,
K. Alsubai,
S. J. Bentley,
A. Collier Cameron,
L. Hebb,
K. Horne,
J. Irwin,
S. R. Kane,
M. Mayor,
F. Pepe,
D. Pollacco,
I. Skillen,
S. Udry,
P. J. Wheatley,
D. J. Christian,
R. Enoch
, et al. (6 additional authors not shown)
Abstract:
We report that a Jupiter-mass planet, WASP-7b, transits the V = 9.5 star HD197286 every 4.95 d. This is the brightest discovery from the WASP-South transit survey and the brightest transiting-exoplanet system in the Southern hemisphere. WASP-7b is among the densest of the known Jupiter-mass planets, suggesting that it has a massive core. The planet mass is 0.96 M_Jup, the radius 0.915 R_Jup, and…
▽ More
We report that a Jupiter-mass planet, WASP-7b, transits the V = 9.5 star HD197286 every 4.95 d. This is the brightest discovery from the WASP-South transit survey and the brightest transiting-exoplanet system in the Southern hemisphere. WASP-7b is among the densest of the known Jupiter-mass planets, suggesting that it has a massive core. The planet mass is 0.96 M_Jup, the radius 0.915 R_Jup, and the density 1.26 rho_Jup.
△ Less
Submitted 16 May, 2008;
originally announced May 2008.
-
A Survey of Eclipsing Binary Stars in the Eastern Spiral Arm of M31
Authors:
Ian Todd,
Don Pollacco,
Ian Skillen,
D. M. Bramich,
Steve Bell,
Thomas Augusteijn
Abstract:
Results of an archival survey are presented using B-band imaging of the eastern spiral arm of M31. Focusing on the eclipsing binary star population, a matched-filter technique has been used to identify 280 binary systems. Of these, 127 systems (98 of which are newly discovered) have sufficient phase coverage to allow accurate orbital periods to be determined. At least nine of these binaries are…
▽ More
Results of an archival survey are presented using B-band imaging of the eastern spiral arm of M31. Focusing on the eclipsing binary star population, a matched-filter technique has been used to identify 280 binary systems. Of these, 127 systems (98 of which are newly discovered) have sufficient phase coverage to allow accurate orbital periods to be determined. At least nine of these binaries are detached systems which could, in principle, be used for distance determination. The light curves of the detached and other selected systems are presented along with a discussion of some of the more interesting binaries. The impact of unresolved stellar blends on these lightcurves is considered.
△ Less
Submitted 23 June, 2005;
originally announced June 2005.
