Showing 1–27 of 27 results for author: Tiwary, C S

Harvesting magneto-acoustic waves using magnetic two-dimensional chromium telluride (CrTe3)

Authors: Chinmayee Chowde Gowda, Alexey Kartsev, Nishant Tiwari, Suman Sarkar, Safronov A. A, Varun Chaudhary, Chandra Sekhar Tiwary

Abstract: A vast majority of electrical devices have integrated magnetic units, which generate constant magnetic fields with noticeable vibrations. The majority of existing nanogenerators acquire energy through friction/mechanical forces and most of these instances overlook acoustic vibrations and magnetic fields. Magnetic two-dimensional (2D) tellurides present a wide range of possibilities for devising a… ▽ More A vast majority of electrical devices have integrated magnetic units, which generate constant magnetic fields with noticeable vibrations. The majority of existing nanogenerators acquire energy through friction/mechanical forces and most of these instances overlook acoustic vibrations and magnetic fields. Magnetic two-dimensional (2D) tellurides present a wide range of possibilities for devising a potential flexible energy harvester. We have synthesized two-dimensional chromium telluride (2D CrTe3) which exhibits ferromagnetic (FM) nature with a Tc of 224 K. The structure exhibits stable high remnant magnetization, making 2D CrTe3 flakes a potential material for harvesting of magneto-acoustic waves at room temperature. A magneto-acoustic nanogenerator (MANG) was fabricated composing of 2D CrTe3 dispersed in a polymer matrix. Basic mechanical stability and sensitivity of the device with change in load conditions were tested. A high surface charge density of 2.919 mC m-2 was obtained for the device. The thermal strain created in the lattice structure was examined using in-situ Raman spectroscopic measurements. The magnetic anisotropy energy (MAE) responsible for long-range FM ordering was calculated with the help of theoretical modelling. The theoretical calculations also showed opening of electronic bandgap which enhances the flexoelectric effects. The MANG can be a potential energy harvester to synergistically tap into the magneto-acoustic vibrations generated from the frequency changes of a vibrating device such as loudspeakers. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Non-thermal Magnetic Deicing Using Two-Dimensional Chromium Telluride

Authors: Chinmayee Chowde Gowda, Alexey Kartsev, Nishant Tiwari, Safronov A. A, Prafull Pandey, Ajit K. Roy, Pulickel M. Ajayan, Douglas S. Galvao, Chandra Sekhar Tiwary

Abstract: Two-dimensional (2D) chromium telluride Cr2Te3 exhibits strong ferromagnetic ordering with high coercivity at low temperatures and paramagnetic behaviour when approaching room temperature. The spin states of monolayer Cr2Te3 show ferromagnetic ordering in the ground state, and in-situ Raman analysis shows reversible structure transformation and hence a ferromagnetic to paramagnetic transition duri… ▽ More Two-dimensional (2D) chromium telluride Cr2Te3 exhibits strong ferromagnetic ordering with high coercivity at low temperatures and paramagnetic behaviour when approaching room temperature. The spin states of monolayer Cr2Te3 show ferromagnetic ordering in the ground state, and in-situ Raman analysis shows reversible structure transformation and hence a ferromagnetic to paramagnetic transition during low-temperature heating cycles (0 - 25 °C). The magnetic phase transition near room temperature in the 2D Cr2Te3 prompted the exploration of these layered materials for energy application. We demonstrate that the low-temperature ferromagnetic behavior can be used to magnetically deice material surfaces using an external magnetic source, avoiding the use of harsh chemicals and high temperatures. The hydrophobic nature and dipole interactions of H2O molecules with the surface of the 2D Cr2Te3 coating aid in the condensation of ice droplets formed on the surface. First-principles calculations also confirm the observed crystal structure, surface interaction, and magnetic properties of 2D Cr2Te3. △ Less

Submitted 20 June, 2024; originally announced June 2024.

From Pure Mathematics to Macroscale Applications: The Genesis of Schwarzites

Authors: Levi C. Felix, Rushikesh Ambekar, Raphael M. Tromer, Cristiano F. Woellner, Varlei Rodrigues, Pulickel M. Ajayan, Chandra S. Tiwary, Douglas S. Galvao

Abstract: Schwarzites are porous (spongy-like) carbon allotropes with negative Gaussian curvatures. They were proposed by Mackay and Terrones inspired by the works of the German mathematician Hermann Schwarz on Triply-Periodic Minimal Surfaces (TPMS). This review presents and discusses the history of schwarzites and their place among curved carbon nanomaterials. We summarized the main works on schwarzites a… ▽ More Schwarzites are porous (spongy-like) carbon allotropes with negative Gaussian curvatures. They were proposed by Mackay and Terrones inspired by the works of the German mathematician Hermann Schwarz on Triply-Periodic Minimal Surfaces (TPMS). This review presents and discusses the history of schwarzites and their place among curved carbon nanomaterials. We summarized the main works on schwarzites available in the literature. We discuss their unique structural, electronic, thermal, and mechanical properties. Although the synthesis of carbon-based schwarzites remains elusive, the recent advances in the synthesis of zeolite-templates nanomaterials bring them closer to reality. Atomic-based models of schwarzites have been translated into macroscale ones that have been 3D printed. These 3D printed models have been exploited in many real-world applications, including water remediation and biomedical ones. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Thickness dependent mechanical properties of soft ferromagnetic two-dimensional CoTe2

Authors: Surbhi Slathia, Cencen Wei, Manoj Tripathi, Raphael Tromer, Solomon Demiss Negedu, Conor Boland, Suman Sarkar, Douglas S. Galvao, Alan Dalton, Chandra Sekhar Tiwary

Abstract: Two dimensional (2D) layered transition-metal-based tellurides (chalcogens) are known to harness their surface atoms characteristics to enhance topographical activities for energy conversion, storage, and magnetic applications. High surface energy due to unsaturated dangling bonds and larger lateral size than the thickness (volume) makes them a potential candidate for emerging electronics. Neverth… ▽ More Two dimensional (2D) layered transition-metal-based tellurides (chalcogens) are known to harness their surface atoms characteristics to enhance topographical activities for energy conversion, storage, and magnetic applications. High surface energy due to unsaturated dangling bonds and larger lateral size than the thickness (volume) makes them a potential candidate for emerging electronics. Nevertheless, the gradual stacking of each sheet alters the surface atoms' subtle features, such as lattice expansion, leading to several phenomena and rendering tunable properties. In the present work, we have monitored thickness-dependent properties of the 2D CoTe2 sheets from nanoscale mechanics, tribology, surface potential distributions, interfacial interaction and magnetism using atomically resolved spectroscopy and different surface probe techniques, in conjunction with theoretical investigations: density functional theory (DFT) and molecular dynamics (MD). The variation in properties observed in theoretical investigation unleashes the crucial role of crystal planes of the CoTe2. The presented results are beneficial in expanding the use of 2D telluride family in flexible electronics, piezo sensors, tribo-generator, and next-generation memory devices. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Topological engineered 3D printing of Architecturally Interlocked Petal-Schwarzites

Authors: Rushikesh S. Ambekar, Leonardo V. Bastos, Douglas S. Galvao, Chandra S. Tiwary, Cristiano F. Woellner

Abstract: The topologically engineered complex Schwarzites architecture has been used to build novel and unique structural components with a high specific strength. The mechanical properties of these building blocks can be further tuned, reinforcing with stronger and high surface area architecture. In the current work, we have built six different Schwarzites structures with multiple interlocked layers, whic… ▽ More The topologically engineered complex Schwarzites architecture has been used to build novel and unique structural components with a high specific strength. The mechanical properties of these building blocks can be further tuned, reinforcing with stronger and high surface area architecture. In the current work, we have built six different Schwarzites structures with multiple interlocked layers, which we named architecturally interlocked petal-schwarzites (AIPS). These complex structures are 3D printed into macroscopic dimensions and compressed using uniaxial compression. The experimental results show a strong dependency of mechanical response on the number of layers and topology of the layers. Fully atomistic molecular dynamics compressive simulations were also carried out, and the results are in good agreement with experimental observations. They can explain the underlying AIPS mechanism of high specific strength and energy absorption. The proposed approach opens a new perspective on develo** new 3D-printed materials with tunable and enhanced mechanical properties. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Comments: 22 pages and 9 figures

Mechanical Energy Absorption of Architecturally Interlocked Petal-Schwarzites

Authors: Leonardo V. Bastos, Rushikesh S. Ambekar, Chandra S. Tiwary, Douglas S. Galvao, Cristiano F. Woellner

Abstract: We carried out fully atomistic reactive molecular dynamics simulations to study the mechanical behavior of six newly proposed hybrid schwarzite-based structures (interlocked petal-schwarzites). Schwarzites are carbon crystalline nanostructures with negative Gaussian curvature created by map** a TPMS (Triply Periodic Minimal Surface) with carbon rings containing six to eight atoms. Our simulation… ▽ More We carried out fully atomistic reactive molecular dynamics simulations to study the mechanical behavior of six newly proposed hybrid schwarzite-based structures (interlocked petal-schwarzites). Schwarzites are carbon crystalline nanostructures with negative Gaussian curvature created by map** a TPMS (Triply Periodic Minimal Surface) with carbon rings containing six to eight atoms. Our simulations have shown that petal-schwarzite structures can withstand uni-axial compressive stress up to the order of GPa and can be compressed past 50 percent strain without structural collapse. Our most resistant hierarchical structure has a calculated compressive strength of 260~GPa and specific energy absorption (SEA) of 45.95 MJ/kg, while possessing a mass density of only 685 kg/m$^3$. These results show that these structures could be excellent lightweight materials for applications that require mechanical energy absorption. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Bottom-up Integration of TMDCs with Pre-Patterned Device Architectures via Transfer-free Chemical Vapor Deposition

Authors: Lucas M. Sassi, Sathvik Ajay Iyengar, Anand B. Puthirath, Yuefei Huang, Xingfu Li, Tanguy Terlier, Ali Mojibpour, Ana Paula C. Teixeira, Palash Bharadwaj, Chandra Sekhar Tiwary, Robert Vajtai, Saikat Talapatra, Boris Yakobson, Pulickel M. Ajayan

Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDCs) remain a topic of immense interest. Specifically, given their low operational switching costs, they find many niche applications in new computing architectures with the promise of continued miniaturization. However, challenges lie in Back End of Line (BEOL) integration temperature and time compliance regarding current requirements for c… ▽ More Two-dimensional (2D) transition metal dichalcogenides (TMDCs) remain a topic of immense interest. Specifically, given their low operational switching costs, they find many niche applications in new computing architectures with the promise of continued miniaturization. However, challenges lie in Back End of Line (BEOL) integration temperature and time compliance regarding current requirements for crystal growth. Additionally, deleterious and time-consuming transfer processes and multiple steps involved in channel/contact engineering can cripple device performance. This work demonstrates kinetics-governed in-situ growth regimes (surface or edge growth from gold) of WSe2 and provides a mechanistic understanding of these regimes via energetics across various material interfaces. As a proof-of-concept, field effect transistors (FET) with an in-situ grown WSe2 channel across Au contacts are fabricated, demonstrating a 2D semiconductor transistor via a transfer-free method within the 450-600 C 2h-time window requirement BEOL integration. We leverage directional edge growth to fabricate contacts with robust thickness-dependent Schottky-to-Ohmic behavior. By transitioning between Au and SiO2 growth substrates in situ, this work achieves strain-induced subthreshold swing of 140 mV/decade, relatively high mobility of 107 +- 19 cm2V-1s-1, and robust ON/OFF ratios 10^6 in the fabricated FETs. △ Less

Submitted 23 May, 2023; originally announced May 2023.

Comments: 32 pages, 5 Figures

Atomically Thin Yellow Pearl: An Impetus for Thermal Nonlinear Optical Effect Assisted Continuous Wave Random Lasing

Authors: N. Mandal, A. Pramanik, A. Dey, P. Kumbhakar, V. Kochat, A. R. S. Gautam, N. Glavin, A. K. Roy, P. M. Ajayan, C. S. Tiwary

Abstract: Above cryogenic temperatures, random laser (RL) emission under continuous wave (CW) optical pum** is often challenging for materials having plenty of lattice defects. Thus, intensive care is required while fabricating the RL device. Synthesis of 2D materials having unique functionality at the atomic limit is necessary for use in such devices. In this work, defects-free 2D yellow pearl (2D-YP) ha… ▽ More Above cryogenic temperatures, random laser (RL) emission under continuous wave (CW) optical pum** is often challenging for materials having plenty of lattice defects. Thus, intensive care is required while fabricating the RL device. Synthesis of 2D materials having unique functionality at the atomic limit is necessary for use in such devices. In this work, defects-free 2D yellow pearl (2D-YP) has been synthesized from bulk south sea pearl using liquid-phase exfoliation (LPE) technique. Thereafter, 2D-YP has been employed as passive scatterer to achieve CW pumped RL emission from a conventional gain molecule, i.e., Rhodamine B (RhB). Compared to other semiconductor (TiO2) and 2D (Graphene and h-BN) passive scatterers, ~25 times improvement in gain volume is observed for the disordered system consisting of RhB and 2D-YP, i.e., 2D-YP@RhB, which is found to be due to the formation of a large refractive index gradient, as induced by the thermal nonlinear optical (NLO) interaction. Hence, incoherent RL (ic-RL) emission ~591 nm is reported for 2D-YP@RhB at a lowest threshold input pump power and a linewidth of 65 mW and 3 nm, respectively. Additionaly, a clear transition from ic-RL to mode tunable coherent RL (c-RL) emission is also possible by altering the configuration of the 2D-YP@RhB container. Therefore, the newly designed Van der Waals heterostructure, i.e., 2D-YP with intrinsic photon trap** capability may pave an avenue towards develo** future exciting optoelectronic devices. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Two-dimensional (2D) d-Silicates from abundant natural minerals

Authors: Preeti Lata Mahapatra, Appu Kumar Singh, Raphael Tromer, Karthik R., Ambresha M., Gelu Costin, Basudev Lahiri, Tarun Kumar Kundu, P. M. Ajayan, Douglas S. Galvao, Chandra Shekhar Tiwary

Abstract: In the last decade, the materials community has been exploring new 2D materials (graphene, metallene, TMDs, TMCs, MXene, among others) that have unique physical and chemical properties. Recently, a new family of 2D materials, the so-called 2D silicates, have been proposed. They are predicted to exhibit exciting properties (such as high catalytic activity, piezoelectricity, and 2D magnetism). In th… ▽ More In the last decade, the materials community has been exploring new 2D materials (graphene, metallene, TMDs, TMCs, MXene, among others) that have unique physical and chemical properties. Recently, a new family of 2D materials, the so-called 2D silicates, have been proposed. They are predicted to exhibit exciting properties (such as high catalytic activity, piezoelectricity, and 2D magnetism). In the current work, we demonstrate a generic approach to the synthesis of large-scale 2D silicates from selected minerals, such as Diopside (d). Different experimental techniques were used to confirm the existence of the 2D structures (named 2D-d-silicates). DFT simulations were also used to gain insight into the structural features and energy harvesting mechanisms (flexoelectric response generating voltage up to 10 V). The current approach is completely general and can be utilized for large-scale synthesis of 2D silicates and their derivatives, whose large-scale syntheses have been elusive. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Topologically engineered 3D printed architectures with superior mechanical strength

Authors: R. S. Ambekar, B. Kushwaha, P. Sharma, F. Bosia, M. Fraldi, N. Pugno, C. S. Tiwary

Abstract: Materials that are lightweight yet exhibit superior mechanical properties are of compelling importance for several technological applications that range from aircrafts to household appliances. Lightweight materials allow energy saving and reduce the amount of resources required for manufacturing. Researchers have expended significant efforts in the quest for such materials, which require new conce… ▽ More Materials that are lightweight yet exhibit superior mechanical properties are of compelling importance for several technological applications that range from aircrafts to household appliances. Lightweight materials allow energy saving and reduce the amount of resources required for manufacturing. Researchers have expended significant efforts in the quest for such materials, which require new concepts in both tailoring material microstructure as well as structural design. Architectured materials, which take advantage of new engineering paradigms, have recently emerged as an exciting avenue to create bespoke combinations of desired macroscopic material responses. In some instances, rather unique structures have emerged from advanced geometrical concepts (e.g. gyroids, menger cubes, or origami/kirigami-based structures), while in others innovation has emerged from mimicking nature in bio-inspired materials (e.g. honeycomb structures, nacre, fish scales etc.). Beyond design, additive manufacturing has enabled the facile fabrication of complex geometrical and bio-inspired architectures, using computer aided design models. The combination of simulations and experiments on these structures has led to an enhancement of mechanical properties, including strength, stiffness and toughness. In this review, we provide a perspective on topologically engineered architectured materials that exhibit optimal mechanical behaviour and can be readily printed using additive manufacturing. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Journal ref: MATERIALS TODAY (2021), 48, 72-94

Rain energy harvesting using atomically thin Gadolinium Telluride decorated 3D Printed nanogenerator

Authors: Partha Kumbhakar, Arko Parui, Rushikesh S. Ambekar, Madhubanti Mukherjee, Saif Siddique, Nicola M. Pugno, Abhisek K. Singh, Chandra S. Tiwary

Abstract: The 3D printing technology offers an innovative approach for develo** energy storage devices to create facile and low-cost customized electrodes for modern electronics. Generating electric potential by moving a droplet of ionic solution over two-dimensional (2D) materials is a novel method for rain energy harvesting. This work demonstrated a liquid-solid contact electrification-based 3D printed… ▽ More The 3D printing technology offers an innovative approach for develo** energy storage devices to create facile and low-cost customized electrodes for modern electronics. Generating electric potential by moving a droplet of ionic solution over two-dimensional (2D) materials is a novel method for rain energy harvesting. This work demonstrated a liquid-solid contact electrification-based 3D printed nanogenerator where raindrop passes through the positively charged ultrathin Gadolinium Telluride (Gd2Te3) sheets. Experimental results showed that voltage as high as ~0.6 V could be generated by moving a droplet of ionic solution on the decorated 3D printed nanogenerator. The output efficiency of the nanogenerator is increased ~400% by enhancing the surface area of copious 3D printed porous structures. Density Functional Theory (DFT) calculations are done, revealing that the high electrical conductivity of (112) surface of Gd2Te3 is due to the p-type charge carriers. Additionally, we illustrate the enhancement of the output performance (~0.8V) by using a graphite rod and arbitrarily manipulating the surface charge. Therefore, this work can open up a new avenue to advance scientific research of Blue energy harvesting and tackle the energy crisis. △ Less

Submitted 18 January, 2022; originally announced February 2022.

Schwarzite and schwarzynes based load-bear resistant radial cellular griding-based 3D printed structures

Authors: Eliezer F. Oliveira, Rushikesh S. Ambekar, Douglas S. Galvao, Chandra S. Tiwary

Abstract: Nature-occurring structures exhibiting unique topological features such as complex and gradient porosity has been the basis to create new materials and/or structures. Most studies have been focused on complex periodic porous structures but gradient porous ones have not been yet fully investigated for stable structural designs. In this work, we have proposed and tested a new approach to create cell… ▽ More Nature-occurring structures exhibiting unique topological features such as complex and gradient porosity has been the basis to create new materials and/or structures. Most studies have been focused on complex periodic porous structures but gradient porous ones have not been yet fully investigated for stable structural designs. In this work, we have proposed and tested a new approach to create cellular griding structures, in which the mass density varies from the center to the borders, i.e, a radial gradient. To create these new structures we exploited the topology of two carbon-based families with different pore sizes, the schwarzites, and schwarzynes. We created fully atomistic models that were translated into macroscale ones that were then 3D printed. The mechanical behavior of the gradient structures was investigated by molecular dynamics simulations and mechanical compression tests of the printed models. Our results show that their mechanical response can be engineered (for instance, in terms of energy absorption, ballistic performance, etc.) and can outperform their corresponding density uniform structures. △ Less

Submitted 12 November, 2021; originally announced November 2021.

Comments: 26 pages, 7 figures, and 2 tables

Multifold enhancement in magnetization of atomically thin Cobalt Telluride

Authors: Solomon Demiss, Raphael Tromer, Saif Siddique, Cristiano F. Woellner, Olu Emmanuel Femi, Mithun Palit, Ajit K. Roy, Prafull Pandey, Douglas S. Galvao, Partha Kumbhakar, Chandra Sekhar Tiwary

Abstract: Magnetism in semiconductor two-dimensional (2D) materials is gaining popularity due to its potential application in memory devices, sensors, spintronic and biomedical applications. Here, 2D Cobalt Telluride (CoTe) has been synthesized from its bulk crystals using a simple and scalable liquid-phase exfoliation method. The atomically thin CoTe shows over four hundred times enhancement in its magneti… ▽ More Magnetism in semiconductor two-dimensional (2D) materials is gaining popularity due to its potential application in memory devices, sensors, spintronic and biomedical applications. Here, 2D Cobalt Telluride (CoTe) has been synthesized from its bulk crystals using a simple and scalable liquid-phase exfoliation method. The atomically thin CoTe shows over four hundred times enhancement in its magnetic saturation values compared to the bulk form. The UV-Vis absorption spectra reveal superior absorption in the high energy region, suggesting a semiconducting nature. Furthermore, we explain bandgap and origin of high magnetic behavior by density functional theory (DFT) calculations. The 2D CoTe shows a larger magnetism compared to bulk CoTe due to the reduced coordination number of the surface atoms, shape anisotropy and surface charge effect. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Magnetic Field Dependent Piezoelectricity in Atomically Thin Co$_2$Te$_3$

Authors: Solomon Demiss, Alexey Karstev, Mithun Palit, Prafull Pandey, G. P Das, Olu Emmanuel Femi, Ajit K. Roy, Partha Kumbhakar, Pulickel M. Ajayan, Chandra Sekhar Tiwary

Abstract: Two dimensional (2D) materials have received a surge in research interest due to their exciting range of properties. Here we show that 2D cobalt telluride (Co2Te3), successfully synthesized via liquid-phase exfoliation in an organic solvent, exhibits weak ferromagnetism and semiconducting behavior at room temperature. The magnetic field-dependent piezoelectric properties of 2D Co2Te3 sample show m… ▽ More Two dimensional (2D) materials have received a surge in research interest due to their exciting range of properties. Here we show that 2D cobalt telluride (Co2Te3), successfully synthesized via liquid-phase exfoliation in an organic solvent, exhibits weak ferromagnetism and semiconducting behavior at room temperature. The magnetic field-dependent piezoelectric properties of 2D Co2Te3 sample show magneto-electric response of the material and a linear relationship between the output voltage and applied magnetic field. First-principles density functional theory (DFT) and ab initio molecular dynamics are used to explain these experimental results. Our work could pave the way for the development of 2D materials with coupled magnetism and piezoelectricity, leading to new applications in electromagnetics. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Two-dimensional Cobalt Telluride as Piezo-tribogenerator

Authors: Solomon Demiss, Raphael Tromer, Chinmayee Chowde Gowda, Olu Emmanuel Femi, Ajit K. Roy, Prafull Pandey, Douglas S. Galvao, Partha Kumbhakar, Pulickel M. Ajayan, Chandra Sekhar Tiwary

Abstract: Two-dimensional (2D) materials have been shown to be efficient in energy harvesting. Here, we report utilization of waste heat to generate electricity via combined piezoelectric and triboelectric property of 2D Cobalt Telluride (CoTe2). The piezo-triboelectric nanogenerator (PTNG) produced an open-circuit voltage of ~5V under 1N force and the effect of temperature in the 305-363 K range shows a fo… ▽ More Two-dimensional (2D) materials have been shown to be efficient in energy harvesting. Here, we report utilization of waste heat to generate electricity via combined piezoelectric and triboelectric property of 2D Cobalt Telluride (CoTe2). The piezo-triboelectric nanogenerator (PTNG) produced an open-circuit voltage of ~5V under 1N force and the effect of temperature in the 305-363 K range shows a four-fold energy conversion efficiency improvement. The 2D piezo-tribogenerator shows excellent characteristics with a maximum voltage of ~10V, fast response time and high responsivity. Density functional theory was used to gain further insights and validation of the experimental results. Our results could lead to energy harvesting approaches using 2D materials from various thermal sources and dissipated waste heat from electronic devices. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Mechanical Properties of 3D-Printed Pentadiamond

Authors: Levi C. Felix, Rushikesh S. Ambekar, Cristiano F. Woellner, Brijesh Kushwaha, Varinder Pal, Douglas S. Galvao, Chandra S. Tiwary

Abstract: In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carbon allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independ… ▽ More In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carbon allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independent. The stress-strain curves of the 3D-printed structures exhibit three characteristic regions. For low-strain values, this first region presents a non-linear behavior close to zero, followed by a well-defined linear behavior. The second regime is a quasi-plastic one and the third one is densification followed by structural failures (fracture). The Young's modulus values decrease with the number of pores. The deformation mechanism is bending-dominated and different from the layer-by-layer deformation mechanism observed for other 3D-printed structures. They exhibit good energy absorption capabilities, with some structures even outperforming kevlar. Interestingly, considering the Ashby chart, 3D-printed pentadiamond lies almost on the ideal stretch and bending-dominated lines, making them promising materials for energy absorption applications. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Mechanical Response of Pentadiamond: A DFT and Molecular Dynamics Study

Authors: Levi C. Felix, Raphael M. Tromer, Cristiano F. Woellner, Chandra S. Tiwary, Douglas S. Galvao

Abstract: Pentadiamond is a recently proposed new carbon allotrope consisting of a network of pentagonal rings where both sp$^2$ and sp$^3$ hybridization are present. In this work we investigated the mechanical and electronic properties, as well as, the thermal stability of pentadiamond using DFT and fully atomistic reactive molecular dynamics (MD) simulations. We also investigated its properties beyond the… ▽ More Pentadiamond is a recently proposed new carbon allotrope consisting of a network of pentagonal rings where both sp$^2$ and sp$^3$ hybridization are present. In this work we investigated the mechanical and electronic properties, as well as, the thermal stability of pentadiamond using DFT and fully atomistic reactive molecular dynamics (MD) simulations. We also investigated its properties beyond the elastic regime for three different deformation modes: compression, tensile and shear. The behavior of pentadiamond under compressive deformation showed strong fluctuations in the atomic positions which are responsible for the strain softening at strains beyond the linear regime, which characterizes the plastic flow. As we increase temperature, as expected, Young's modulus values decrease, but this variation (up to 300 K) is smaller than 10\% (from 347.5 to 313.6 GPa), but the fracture strain is very sensitive, varying from $\sim$44\% at 1K to $\sim$5\% at 300K. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Processing Dynamics of 3D-Printed Carbon Nanotubes-Epoxy Composites

Authors: Ali Khater, Sohini Bhattacharyya, M. A. S. R. Saadi, Morgan Barnes, Minghe Lou, Vijay Harikrishnan, Seyed Mohammad Sajadi, Peter J. Boul, Chandra Sekhar Tiwary, Hanyu Zhu, Muhammad M. Rahman, Pulickel M. Ajayan

Abstract: Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void formation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can… ▽ More Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void formation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can be achieved via additional processing steps such as-mechanical methods and/or chemical functionalization, the resulting composites are somewhat limited in structural and functional performances. Here, we demonstrate that 3D printing technique like-direct ink writing offers improved processing of CNTs-polymer composites. The shear-induced flow of an engineered nanocomposite ink through the micronozzle offers some benefits including reducing the number of voids within the epoxy, improving CNTs dispersion and adhesion with epoxy, and partially aligns the CNTs. Such microstructural changes result in superior mechanical performance and heat transfer in the composites compared to their mold-casted counterparts. This work demonstrates the advantages of 3D printing over traditional fabrication methods, beyond the ability to rapidly fabricate complex architectures, to achieve improved processing dynamics for fabricating CNT-polymer nanocomposites with better structural and functional properties. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Comments: 16 pages, 6 figures

Spontaneous time reversal symmetry breaking at individual grain boundaries in graphene

Authors: Kimberly Hsieh, Vidya Kochat, Tathagata Biswas, Chandra Sekhar Tiwary, Abhishek Mishra, Gopalakrishnan Ramalingam, Aditya Jayaraman, Kamanio Chattopadhyay, Srinivasan Raghavan, Manish Jain, Arindam Ghosh

Abstract: Graphene grain boundaries have attracted interest for their ability to host nearly dispersionless electronic bands and magnetic instabilities. Here, we employ quantum transport and universal conductance fluctuations (UCF) measurements to experimentally demonstrate a spontaneous breaking of time reversal symmetry (TRS) across individual GBs of chemical vapour deposited graphene. While quantum trans… ▽ More Graphene grain boundaries have attracted interest for their ability to host nearly dispersionless electronic bands and magnetic instabilities. Here, we employ quantum transport and universal conductance fluctuations (UCF) measurements to experimentally demonstrate a spontaneous breaking of time reversal symmetry (TRS) across individual GBs of chemical vapour deposited graphene. While quantum transport across the GBs indicate spin-scattering-induced dephasing, and hence formation of local magnetic moments, below $T\lesssim 4$ K, we observe complete lifting of TRS at high carrier densities ($n \gtrsim 5\times 10^{12}$cm$^{-2}$) and low temperature ($T\lesssim 2$ K). An unprecedented thirty times reduction in the UCF magnitude with increasing do** density further supports the possibility of an emergent frozen magnetic state at the GBs. Our experimental results suggest that realistic GBs of graphene can be a promising resource for new electronic phases and spin-based applications. △ Less

Submitted 30 March, 2021; v1 submitted 9 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. Lett. 126, 206803 (2021)

Three-dimensional Printing of Complex Graphite Structures

Authors: Seyed Mohammad Sajadi, Shayan Enayat, Lívia Vásárhelyi, Alessandro Alabastri, Minghe Lou, Lucas M. Sassi, Alex Kutana, Sanjit Bhowmick, Christian Durante, Ákos Kukovecz, Anand B. Puthirath, Zoltán Kónya, Robert Vajtai, Peter Boul, Chandra Shekhar Tiwary, Muhammad M. Rahman, Pulickel M. Ajayan

Abstract: Graphite, with many industrial applications, is one of the widely sought-after allotropes of carbon. The sp2 hybridized and thermodynamically stable form of carbon forms a layered structure with strong in-plane carbon bonds and weak inter-layer van der Waals bonding. Graphite is also a high-temperature ceramic, and sha** them into complex geometries is challenging, given its limited sintering be… ▽ More Graphite, with many industrial applications, is one of the widely sought-after allotropes of carbon. The sp2 hybridized and thermodynamically stable form of carbon forms a layered structure with strong in-plane carbon bonds and weak inter-layer van der Waals bonding. Graphite is also a high-temperature ceramic, and sha** them into complex geometries is challenging, given its limited sintering behavior even at high temperatures. Although the geometric design of the graphite structure in many of the applications could dictate its precision performance, conventional synthesis methods for formulating complex geometric graphite shapes are limited due to the intrinsic brittleness and difficulties of high-temperature processing. Here, we report the development of colloidal graphite ink from commercial graphite powders with reproducible rheological behavior that allows the fabrication of any complex architectures with tunable geometry and directionality via 3D printing at room temperature. The method is enabled via using small amounts of clay, another layered material, as an additive, allowing the proper design of the graphene ink and subsequent binding of graphite platelets during printing. Sheared layers of clay are easily able to flow, adapt, and interface with graphite layers forming strong binding between the layers and between particles that make the larger structures. The direct ink printing of complex 3D architectures of graphite without further heat treatments could lead to easy shape engineering and related applications of graphite at various length scales, including complex graphite molds or crucibles. The 3D printed complex graphitic structures exhibit excellent thermal, electrical, and mechanical properties, and the clay additive does not seem to alter these properties due to the excellent inter-layer dispersion and mixing within the graphite material. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Comments: 19 pages, 4 figures

Liquid-phase reinforced Metal matrix (LMM) composite with non-intuitive properties

Authors: Varinder Pal, Rakesh Das, Rushikesh Ambekhar, Avinash Kumar, Jitesh Vasavada, Banty Kumar, Sujoy Kumar Kar, Suman Sarkar, Mithun Palit, Ajit K. Roy, Manas Paliwal, Krishanu Biswas, Sanjit Bhoumik, Sushil Mishra, Chirodeep Bakli, Chandra Shekhar Tiwary

Abstract: Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of materials by strengthening them with liquids having zero strength/modulus. Here, emulating nature, efforts have been made to develop a new class of tin based alloy… ▽ More Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of materials by strengthening them with liquids having zero strength/modulus. Here, emulating nature, efforts have been made to develop a new class of tin based alloy/composite with liquid metal reinforcement (LMM). Based on thermodynamic calculations, a composition has been designed such that on melting and casting it forms a solid metal (tin solid solution) and the eutectic mixture remains in liquid form at room temperature. The composite structure named as LMM shows multifold improvement in hardness, strength, ductility, toughness and wear resistance as compared to conventional solder alloys. A Finite Element Method (FEM) based simulation shows strain distribution in the composite which results in the unique behavior. The LMM also shows a negative coefficient of thermal expansion which is further verified using in-situ microscopy and thermodynamic calculations. △ Less

Submitted 8 February, 2020; originally announced February 2020.

High Entropy Alloy Nanoparticles Decorated, p-type 2D-Molybdenum Disulphide (MoS2) and Gold Schottky Junction Enhanced Hydrogen Sensing

Authors: Kusuma Urs MB, Nirmal Kumar Katiyar, Ritesh Kumar, Krishanu Biswas, Abhishek K. Singh, C S Tiwary, Vinayak Kamble

Abstract: Molybdenum Disulphide (MoS2) is an interesting material which exists in atomically thin multilayers and can be exfoliated into monolayer or a few layers for multiple applications. It has emerged as a promising material for development of such efficient sensors. Here, we have exfoliated and decorated MoS2 flakes with novel, single phase High Entropy Alloy (HEA) nanoparticles using facile and scalab… ▽ More Molybdenum Disulphide (MoS2) is an interesting material which exists in atomically thin multilayers and can be exfoliated into monolayer or a few layers for multiple applications. It has emerged as a promising material for development of such efficient sensors. Here, we have exfoliated and decorated MoS2 flakes with novel, single phase High Entropy Alloy (HEA) nanoparticles using facile and scalable cryomilling technique, followed by sonochemical method. It is found that the decoration of HEA nanoparticles impart surface enhanced Raman scattering effect and reduction in the work function of the material from 4.9 to 4.75 eV as measured by UV photoelectron spectroscopy. This change in the work function results in a schottky barrier between the gold contact and HEA decorated MoS2 flakes as a result of drastic changes in the surface chemical non-stoichiometry. The response to hydrogen gas is studied at temperatures 30 to 100 oC and it shows unusual p-type nature due to surface adsorbed oxygen species. The nanoscale junction formed between HEA and MoS2 shows 10 times increase in the response towards hydrogen gas at 80 oC. The experimental observations are further explained with DFT simulation showing more favourable hydrogen adsorption on HEA decorated MoS2 resulting for enhanced response. △ Less

Submitted 6 February, 2020; originally announced February 2020.

Zeolite-inspired 3d printed structures with enhanced mechanical properties

Authors: Rushikesh S. Ambekar, Eliezer F. Oliveira, Brijesh Kushwaha, Leonardo D. Machado, Mohammad Sajadi, Ray H. Baughman, Pulickel M. Ajayan, Ajit K. Roy, Douglas S. Galvao, Chandra S. Tiwary

Abstract: Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, r… ▽ More Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts. △ Less

Submitted 12 February, 2020; v1 submitted 2 February, 2020; originally announced February 2020.

Comments: 24 pages, 6 figures

Journal ref: Additive Manufacturing, 2021, 101628

Mechanical Properties of Ultralow Density Graphene Oxide/Polydimethylsiloxane Foams

Authors: Cristiano F. Woellner, Peter S. Owuor, Tong Li, Soumya Vinod, Sehmus Ozden, Suppanat Kosolwattana, Sanjit Bhowmick, Luong X. Duy, Rodrigo V. Salvatierra, Bingqing Wei, Syed A. S. Asif, James M. Tour, Robert Vajtai, Jun Lou, Douglas S. Galvao, Chandra S. Tiwary, Pulickel. M. Ajayan

Abstract: Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical prop… ▽ More Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical properties are mainly attributed to the intrinsic graphene and/or GO electronic and mechanical properties. Despite the attractive physical properties of graphene/GO based-foams, their structural and thermal stabilities are still a problem for some applications. For instance, they are easily degraded when placed in flowing solutions, either by the collapsing of their layers or just by structural disintegration into small pieces. Recently, a new and scalable synthetic approach to produce low-density 3D macroscopic GO structure interconnected with polydimethylsiloxane (PDMS) polymeric chains (pGO) was proposed. A controlled amount of PDMS is infused into the freeze-dried foam resulting into a very rigid structure with improved mechanical properties, such as tensile plasticity and toughness. The PDMS wets the graphene oxide sheets and acts like a glue bonding PDMS and GO sheets. In order to obtain further insights on mechanisms behind the enhanced mechanical pGO response we carried out fully atomistic molecular dynamics (MD) simulations. Based on MD results, we build up a structural model that can explain the experimentally observed mechanical behavior. △ Less

Submitted 18 January, 2018; originally announced January 2018.

Differences in the Mechanical Properties of Monolayer and Multilayer WSe2/MoSe2

Authors: Y. M. Jaques, P. Manimunda, Y. Nakanishi, S. Susarla, C. F. Woellner, S. Bhowmick, S. A. S. Asif, D. S. Galvão, C. S. Tiwary, P. M. Ajayan

Abstract: Transition metal dichalcogenides are 2D structures with remarkable electronic, chemical, optical and mechanical properties. Monolayer and crystal properties of these structures have been extensively investigated, but a detailed understanding of the properties of their few-layer structures are still missing. In this work we investigated the mechanical differences between monolayer and multilayer WS… ▽ More Transition metal dichalcogenides are 2D structures with remarkable electronic, chemical, optical and mechanical properties. Monolayer and crystal properties of these structures have been extensively investigated, but a detailed understanding of the properties of their few-layer structures are still missing. In this work we investigated the mechanical differences between monolayer and multilayer WSe2 and MoSe2, through fully atomistic molecular dynamics simulations (MD). It was observed that single layer WSe2/MoSe2 deposited on silicon substrates have larger friction coefficients than 2, 3 and 4 layered structures. For all considered cases it is always easier to peel off and/or to fracture MoSe2 structures. These results suggest that the interactions between first layer and substrate are stronger than interlayer interactions themselves. Similar findings have been reported for other nanomaterials and it has been speculated whether this is a universal-like behavior for 2D layered materials. We have also analyzed fracture patterns. Our results show that fracture is chirality dependent with crack propagation preferentially perpendicular to W(Mo)-Se bonds and faster for zig-zag-like defects. △ Less

Submitted 17 January, 2018; originally announced January 2018.

Quaternary two-dimensional (2D) transition metal dichalcogenides (TMDs) with tunable bandgap

Authors: Sandhya Susarla, Alex Kutana, Jordan A. Hachtel, Vidya Kochat, Amey Apte, Robert Vajtai, Juan Carlos Idrobo, Boris I. Yakobson, Chandra Sekhar Tiwary, Pulickel M Ajayan

Abstract: Alloying/do** in two-dimensional material has been important due to wide range band gap tunability. Increasing the number of components would increase the degree of freedom which can provide more flexibility in tuning the band gap and also reduced the growth temperature. Here, we report synthesis of quaternary alloys MoxW1-xS2ySe2(1-y) using chemical vapour deposition. The composition of alloys… ▽ More Alloying/do** in two-dimensional material has been important due to wide range band gap tunability. Increasing the number of components would increase the degree of freedom which can provide more flexibility in tuning the band gap and also reduced the growth temperature. Here, we report synthesis of quaternary alloys MoxW1-xS2ySe2(1-y) using chemical vapour deposition. The composition of alloys has been tuned by changing the growth temperatures. As a result, we can tune the bandgap which varies from 1.73 eV to 1.84 eV. The detailed theoretical calculation supports the experimental observation and shows a possibility of wide tunability of bandgap. △ Less

Submitted 2 May, 2017; originally announced May 2017.

Atomically thin gallium layers from solid-melt exfoliation

Authors: V. Kochat, A. Samanta, Y. Zhang, S. Bhowmick, P. Manimunda, S. A. S. Asif, A. Stender, Robert Vajtai, A. K. Singh, C. S. Tiwary, P. M. Ajayan

Abstract: Among the large number of promising two-dimensional (2D) atomic layer crystals, true metallic layers are rare. Through combined theoretical and experimental approaches, we report on the stability and successful exfoliation of atomically thin gallenene sheets, having two distinct atomic arrangements along crystallographic twin directions of the parent alpha-gallium. Utilizing the weak interface bet… ▽ More Among the large number of promising two-dimensional (2D) atomic layer crystals, true metallic layers are rare. Through combined theoretical and experimental approaches, we report on the stability and successful exfoliation of atomically thin gallenene sheets, having two distinct atomic arrangements along crystallographic twin directions of the parent alpha-gallium. Utilizing the weak interface between solid and molten phases of gallium, a solid-melt interface exfoliation technique is developed to extract these layers. Phonon dispersion calculations show that gallenene can be stabilized with bulk gallium lattice parameters. The electronic band structure of gallenene shows a combination of partially filled Dirac cone and the non-linear dispersive band near Fermi level suggesting that gallenene should behave as a metallic layer. Furthermore it is observed that strong interaction of gallenene with other 2D semiconductors induces semiconducting to metallic phase transitions in the latter paving the way for using gallenene as interesting metallic contacts in 2D devices. △ Less

Submitted 26 April, 2017; originally announced April 2017.