Showing 101–150 of 267 results for author: Tiwari, A

Non-Hermitian topology in monitored quantum circuits

Authors: Christoph Fleckenstein, Alberto Zorzato, Daniel Varjas, Emil J. Bergholtz, Jens H. Bardarson, Apoorv Tiwari

Abstract: We demonstrate that genuinely non-Hermitian topological phases and corresponding topological phase transitions can be naturally realized in monitored quantum circuits, exemplified by the paradigmatic non-Hermitian Su-Schrieffer-Heeger model. We emulate this model by a 1D chain of spinless electrons evolving under unitary dynamics and subject to periodic measurements that are stochastically invoked… ▽ More We demonstrate that genuinely non-Hermitian topological phases and corresponding topological phase transitions can be naturally realized in monitored quantum circuits, exemplified by the paradigmatic non-Hermitian Su-Schrieffer-Heeger model. We emulate this model by a 1D chain of spinless electrons evolving under unitary dynamics and subject to periodic measurements that are stochastically invoked. The non-Hermitian topology is visible in topological invariants adapted to the context of monitored circuits. For instance, the topological phase diagram of the monitored realization of the non-Hermitian Su-Schrieffer-Heeger model is obtained from the biorthogonal polarization computed from an effective Hamiltonian of the monitored system. Importantly, our monitored circuit realization allows direct access to steady state biorthogonal expectation values of generic observables, and hence, to measure physical properties of a genuine non-Hermitian model. We expect our results to be applicable more generally to a wide range of models that host non-Hermitian topological phases. △ Less

Submitted 14 January, 2022; originally announced January 2022.

Comments: 4.5 pages, 3 figures

Journal ref: Phys. Rev. Research 4, L032026 (2022)

Indian Licence Plate Dataset in the wild

Authors: Sanchit Tanwar, Ayush Tiwari, Ritesh Chowdhry

Abstract: Indian Licence Plate Detection is a problem that has not been explored much at an open-source level.There are proprietary solutions available for it, but there is no big open-source dataset that can be used to perform experiments and test different approaches.Most of the large datasets available are for countries like China, Brazil, but the model trained on these datasets does not perform well on… ▽ More Indian Licence Plate Detection is a problem that has not been explored much at an open-source level.There are proprietary solutions available for it, but there is no big open-source dataset that can be used to perform experiments and test different approaches.Most of the large datasets available are for countries like China, Brazil, but the model trained on these datasets does not perform well on Indian plates because the font styles and plate designs used vary significantly from country to country.This paper introduces an Indian license plate dataset with 16192 images and 21683 plate plates annotated with 4 points for each plate and each character in the corresponding plate.We present a benchmark model that uses semantic segmentation to solve number plate detection. We propose a two-stage approach in which the first stage is for localizing the plate, and the second stage is to read the text in cropped plate image.We tested benchmark object detection and semantic segmentation model, for the second stage, we used lprnet based OCR. △ Less

Submitted 11 November, 2021; originally announced November 2021.

Comments: 5 pages, 4 figures, 3 tables

On Controllability of Driftless Control System on Symmetric Spaces

Authors: Archana Tiwari, R. N. Padhan, K. C. Pati

Abstract: Symmetric spaces arise in wide variety of problems in Mathematics and Physics. They are mostly studied in Representation theory, Harmonic analysis and Differential geometry. As many physical systems have symmetric spaces as their configuration spaces, the study of controllability on symmetric space is quite interesting. In this paper, a driftless control system of type \dot{x}= \sum_{i=1}^m u_if_i… ▽ More Symmetric spaces arise in wide variety of problems in Mathematics and Physics. They are mostly studied in Representation theory, Harmonic analysis and Differential geometry. As many physical systems have symmetric spaces as their configuration spaces, the study of controllability on symmetric space is quite interesting. In this paper, a driftless control system of type \dot{x}= \sum_{i=1}^m u_if_i(x) is considered on a symmetric space. For this we have established global controllability condition which is illustrated by few examples of exponential submanifolds of SE(3) and random matrix ensembles. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Comments: Comments are welcome as it is a minor extension from Lie groups to symmetric space but with some interesting examples

Air, helium and water leakage in rubber O-ring seals with application to syringes

Authors: C. Huon, A. Tiwari, C. Rotella, P. Mangiagalli, B. N. J. Persson

Abstract: We study the leakage of fluids (liquids or gases) in syringes with glass barrel, steel plunger and rubber O-ring stopper. The leakrate depends on the interfacial surface roughness and on the viscoelastic properties of the rubber. Random surface roughness is produced by sandblasting the rubber O-rings. We present a very simple theory for gas flow which takes into account both the diffusive and ball… ▽ More We study the leakage of fluids (liquids or gases) in syringes with glass barrel, steel plunger and rubber O-ring stopper. The leakrate depends on the interfacial surface roughness and on the viscoelastic properties of the rubber. Random surface roughness is produced by sandblasting the rubber O-rings. We present a very simple theory for gas flow which takes into account both the diffusive and ballistic flow. The theory shows that the interfacial fluid flow (leakage) channels are so narrow that the gas flow is mainly ballistic (the so called Knudsen limit). We compare the leakrate obtained using air and helium. For barrels filled with water we observe no leakage even if leakage occurs for gases. We interpret this as resulting from capillary (Laplace pressure or surface energy) effects. △ Less

Submitted 20 October, 2021; originally announced October 2021.

Comments: 18 pages, 28 figures

Divergence error based $p$-adaptive discontinuous Galerkin solution of time-domain Maxwell's equations

Authors: Apurva Tiwari, Avijit Chatterjee

Abstract: A $p$-adaptive discontinuous Galerkin time-domain method is developed to obtain high-order solutions to electromagnetic scattering problems. A novel feature of the proposed method is the use of divergence error to drive the $p$-adaptive method. The nature of divergence error is explored and that it is a direct consequence of the act of discretization is established. Its relation with relative trun… ▽ More A $p$-adaptive discontinuous Galerkin time-domain method is developed to obtain high-order solutions to electromagnetic scattering problems. A novel feature of the proposed method is the use of divergence error to drive the $p$-adaptive method. The nature of divergence error is explored and that it is a direct consequence of the act of discretization is established. Its relation with relative truncation error is formed which enables the use of divergence error as an inexpensive proxy to truncation error. Divergence error is used as an indicator to dynamically identify and assign spatial operators of varying accuracy to substantial regions in the computational domain. This results in a reduced computational cost than a comparable discontinuous Galerkin time-domain solution using uniform degree piecewise polynomial bases throughout. △ Less

Submitted 18 April, 2022; v1 submitted 19 October, 2021; originally announced October 2021.

Comments: 28 pages, 22 figures

Alkaline CO electro-oxidation: Mechanistic Differences between Copper and Gold Single Crystals and Peculiarities of various Copper Facets

Authors: Aarti Tiwari, Nitish Govindarajan, Hendrik H. Heenen, Anton Bjørnlund, Karen Chan, Sebastian Horch

Abstract: Understanding CO electro-oxidation is crucial towards designing catalysts for electrochemically oxidizing complex organic molecules. Earth-abundant Copper (Cu) has recently been demonstrated to exhibit high alkaline CO electro-oxidation activity, rivaling the previously acclaimed Gold (Au). Herein, we combine single crystal rotating disc electrode (RDE) experiments and ab initio microkinetic model… ▽ More Understanding CO electro-oxidation is crucial towards designing catalysts for electrochemically oxidizing complex organic molecules. Earth-abundant Copper (Cu) has recently been demonstrated to exhibit high alkaline CO electro-oxidation activity, rivaling the previously acclaimed Gold (Au). Herein, we combine single crystal rotating disc electrode (RDE) experiments and ab initio microkinetic modeling to understand the underlying reaction mechanisms on Cu and Au surfaces. Cu exhibits a facet-dependent activity with Cu(111) having a 0.27 V lower overpotential than Au(111) and a comparable CO oxidation current density. Using Koutecky-Levich analysis and DFT based microkinetic modeling, we identify the rate-limiting pathway to be Langmuir-Hinshelwood on Cu whereas Eley-Rideal on Au. We additionally present strikingly variant RDE responses on four Cu facets (111, 100, 110 and 211) and long-term stability analysis on Cu(111) and Au(111). We find a combined reset-reaction profile helps Cu retain its high activity and pose a strong competition to the expensive Au catalysts. △ Less

Submitted 18 October, 2021; v1 submitted 30 September, 2021; originally announced September 2021.

Comments: 17 pages, 4 figures plus supplementary information

Multi-modal Program Inference: a Marriage of Pre-trainedLanguage Models and Component-based Synthesis

Authors: Kia Rahmani, Mohammad Raza, Sumit Gulwani, Vu Le, Daniel Morris, Arjun Radhakrishna, Gustavo Soares, Ashish Tiwari

Abstract: Multi-modal program synthesis refers to the task of synthesizing programs (code) from their specification given in different forms, such as a combination of natural language and examples. Examples provide a precise but incomplete specification, and natural language provides an ambiguous but more "complete" task description. Machine-learned pre-trained models (PTMs) are adept at handling ambiguous… ▽ More Multi-modal program synthesis refers to the task of synthesizing programs (code) from their specification given in different forms, such as a combination of natural language and examples. Examples provide a precise but incomplete specification, and natural language provides an ambiguous but more "complete" task description. Machine-learned pre-trained models (PTMs) are adept at handling ambiguous natural language, but struggle with generating syntactically and semantically precise code. Program synthesis techniques can generate correct code, often even from incomplete but precise specifications, such as examples, but they are unable to work with the ambiguity of natural languages. We present an approach that combines PTMs with component-based synthesis (CBS): PTMs are used to generate candidates programs from the natural language description of the task, which are then used to guide the CBS procedure to find the program that matches the precise examples-based specification. We use our combination approach to instantiate multi-modal synthesis systems for two programming domains: the domain of regular expressions and the domain of CSS selectors. Our evaluation demonstrates the effectiveness of our domain-agnostic approach in comparison to a state-of-the-art specialized system, and the generality of our approach in providing multi-modal program synthesis from natural language and examples in different programming domains. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Comments: To be published in OOPSLA 2021

Triple-cation perovskite solar cells fabricated by hybrid PVD/blade coating process using green solvents

Authors: Severin Siegrist, Shih-Chi Yang, Evgeniia Gilshtein, Xiaoxiao Sun, Ayodhya N. Tiwari, Fan Fu

Abstract: The scalability of highly efficient organic-inorganic perovskite solar cells (PSCs) is one of the remaining challenges of solar module manufacturing. Various scalable methods have been explored to strive for uniform perovskite films of high crystal quality on large-area substrates. However, each of these methods have individual drawbacks, limiting the successful commercialization of perovskite pho… ▽ More The scalability of highly efficient organic-inorganic perovskite solar cells (PSCs) is one of the remaining challenges of solar module manufacturing. Various scalable methods have been explored to strive for uniform perovskite films of high crystal quality on large-area substrates. However, each of these methods have individual drawbacks, limiting the successful commercialization of perovskite photovoltaics. Here, we report a fully scalable hybrid process, which combines vapor- and solution-based techniques to deposit high quality uniform perovskite films on large-area substrates. This two-step process does not use toxic solvents, and it further allows facile implementation of passivation strategies and additives. We fabricated PSCs based on this process and used blade coating to deposit both charge transporting layers (SnO2 and Spiro-OMeTAD) without hazardous solvents in ambient air. The fabricated PSCs have yielded open-circuit voltage up to 1.16 V and power conversion efficiency of 18.7 % with good uniformity on 5 cm x 5 cm substrates. △ Less

Submitted 31 August, 2021; originally announced August 2021.

A Conjecture Equivalent to the Collatz Conjecture

Authors: Ashish Tiwari

Abstract: We present a formulation of the Collatz conjecture that is potentially more amenable to modeling and analysis by automated termination checking tools. We present a formulation of the Collatz conjecture that is potentially more amenable to modeling and analysis by automated termination checking tools. △ Less

Submitted 16 August, 2021; originally announced August 2021.

Deep Geospatial Interpolation Networks

Authors: Sumit Kumar Varshney, Jeetu Kumar, Aditya Tiwari, Rishabh Singh, Venkata M. V. Gunturi, Narayanan C. Krishnan

Abstract: Interpolation in Spatio-temporal data has applications in various domains such as climate, transportation, and mining. Spatio-Temporal interpolation is highly challenging due to the complex spatial and temporal relationships. However, traditional techniques such as Kriging suffer from high running time and poor performance on data that exhibit high variance across space and time dimensions. To thi… ▽ More Interpolation in Spatio-temporal data has applications in various domains such as climate, transportation, and mining. Spatio-Temporal interpolation is highly challenging due to the complex spatial and temporal relationships. However, traditional techniques such as Kriging suffer from high running time and poor performance on data that exhibit high variance across space and time dimensions. To this end, we propose a novel deep neural network called as Deep Geospatial Interpolation Network(DGIN), which incorporates both spatial and temporal relationships and has significantly lower training time. DGIN consists of three major components: Spatial Encoder to capture the spatial dependencies, Sequential module to incorporate the temporal dynamics, and an Attention block to learn the importance of the temporal neighborhood around the gap. We evaluate DGIN on the MODIS reflectance dataset from two different regions. Our experimental results indicate that DGIN has two advantages: (a) it outperforms alternative approaches (has lower MSE with p-value < 0.01) and, (b) it has significantly low execution time than Kriging. △ Less

Submitted 15 August, 2021; originally announced August 2021.

A Machine-Learning-Ready Dataset Prepared from the Solar and Heliospheric Observatory Mission

Authors: Carl Shneider, Andong Hu, Ajay K. Tiwari, Monica G. Bobra, Karl Battams, Jannis Teunissen, Enrico Camporeale

Abstract: We present a Python tool to generate a standard dataset from solar images that allows for user-defined selection criteria and a range of pre-processing steps. Our Python tool works with all image products from both the Solar and Heliospheric Observatory (SoHO) and Solar Dynamics Observatory (SDO) missions. We discuss a dataset produced from the SoHO mission's multi-spectral images which is free of… ▽ More We present a Python tool to generate a standard dataset from solar images that allows for user-defined selection criteria and a range of pre-processing steps. Our Python tool works with all image products from both the Solar and Heliospheric Observatory (SoHO) and Solar Dynamics Observatory (SDO) missions. We discuss a dataset produced from the SoHO mission's multi-spectral images which is free of missing or corrupt data as well as planetary transits in coronagraph images, and is temporally synced making it ready for input to a machine learning system. Machine-learning-ready images are a valuable resource for the community because they can be used, for example, for forecasting space weather parameters. We illustrate the use of this data with a 3-5 day-ahead forecast of the north-south component of the interplanetary magnetic field (IMF) observed at Lagrange point one (L1). For this use case, we apply a deep convolutional neural network (CNN) to a subset of the full SoHO dataset and compare with baseline results from a Gaussian Naive Bayes classifier. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Comments: under review

HIPPODROME: Data Race Repair using Static Analysis Summaries

Authors: Andreea Costea, Abhishek Tiwari, Sigmund Chianasta, Kishore R, Abhik Roychoudhury, Ilya Sergey

Abstract: Implementing bug-free concurrent programs is a challenging task in modern software development. State-of-the-art static analyses find hundreds of concurrency bugs in production code, scaling to large codebases. Yet, fixing these bugs in constantly changing codebases represents a daunting effort for programmers, particularly because a fix in the concurrent code can introduce other bugs in a subtle… ▽ More Implementing bug-free concurrent programs is a challenging task in modern software development. State-of-the-art static analyses find hundreds of concurrency bugs in production code, scaling to large codebases. Yet, fixing these bugs in constantly changing codebases represents a daunting effort for programmers, particularly because a fix in the concurrent code can introduce other bugs in a subtle way. In this work, we show how to harness compositional static analysis for concurrency bug detection, to enable a new Automated Program Repair (APR) technique for data races in large concurrent Java codebases. The key innovation of our work is an algorithm that translates procedure summaries inferred by the analysis tool for the purpose of bug reporting, into small local patches that fix concurrency bugs (without introducing new ones). This synergy makes it possible to extend the virtues of compositional static concurrency analysis to APR, making our approach effective (it can detect and fix many more bugs than existing tools for data race repair), scalable (it takes seconds to analyse and suggest fixes for sizeable codebases), and usable (generally, it does not require annotations from the users and can perform continuous automated repair). Our study conducted on popular open-source projects has confirmed that our tool automatically produces concurrency fixes similar to those proposed by the developers in the past. △ Less

Submitted 6 August, 2021; v1 submitted 5 August, 2021; originally announced August 2021.

Air leakage in seals with application to syringes

Authors: N. Rodriguez, A. Tiwari, B. N. J. Persson

Abstract: We study the leakage of air in syringes with Teflon coated rubber stopper and glass barrel. The leakrate depends on the interfacial surface roughness, the viscoelastic properties of the rubber and on the elastoplastic properties of the Teflon coating. The measured leakage rates are compared to the predictions of a simple theory for gas flow, which takes into account both the diffusive and ballisti… ▽ More We study the leakage of air in syringes with Teflon coated rubber stopper and glass barrel. The leakrate depends on the interfacial surface roughness, the viscoelastic properties of the rubber and on the elastoplastic properties of the Teflon coating. The measured leakage rates are compared to the predictions of a simple theory for gas flow, which takes into account both the diffusive and ballistic air flow, and the elastoplastic multiscale contact mechanics which determines the probability distribution of interfacial separations. The theory shows that the interfacial air flow (leakage) channels are so narrow that the gas flow is mainly ballistic (the so called Knudsen limit). The implications for container closure integrity is discussed. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Comments: 7 pages, 9 figures

Shadow Art Revisited: A Differentiable Rendering Based Approach

Authors: Kaustubh Sadekar, Ashish Tiwari, Shanmuganathan Raman

Abstract: While recent learning based methods have been observed to be superior for several vision-related applications, their potential in generating artistic effects has not been explored much. One such interesting application is Shadow Art - a unique form of sculptural art where 2D shadows cast by a 3D sculpture produce artistic effects. In this work, we revisit shadow art using differentiable rendering… ▽ More While recent learning based methods have been observed to be superior for several vision-related applications, their potential in generating artistic effects has not been explored much. One such interesting application is Shadow Art - a unique form of sculptural art where 2D shadows cast by a 3D sculpture produce artistic effects. In this work, we revisit shadow art using differentiable rendering based optimization frameworks to obtain the 3D sculpture from a set of shadow (binary) images and their corresponding projection information. Specifically, we discuss shape optimization through voxel as well as mesh-based differentiable renderers. Our choice of using differentiable rendering for generating shadow art sculptures can be attributed to its ability to learn the underlying 3D geometry solely from image data, thus reducing the dependence on 3D ground truth. The qualitative and quantitative results demonstrate the potential of the proposed framework in generating complex 3D sculptures that go beyond those seen in contemporary art pieces using just a set of shadow images as input. Further, we demonstrate the generation of 3D sculptures to cast shadows of faces, animated movie characters, and applicability of the framework to sketch-based 3D reconstruction of underlying shapes. △ Less

Submitted 30 July, 2021; originally announced July 2021.

Comments: Accepted in WACV 2022

Hilbert space fragmentation in a 2D quantum spin system with subsystem symmetries

Authors: Alexey Khudorozhkov, Apoorv Tiwari, Claudio Chamon, Titus Neupert

Abstract: We consider a 2D quantum spin model with ring-exchange interaction that has subsystem symmetries associated to conserved magnetization along rows and columns of a square lattice, which implies the conservation of the global dipole moment. In a certain regime, the model is non-integrable, but violates the eigenstate thermalization hypothesis through an extensive Hilbert space fragmentation, includi… ▽ More We consider a 2D quantum spin model with ring-exchange interaction that has subsystem symmetries associated to conserved magnetization along rows and columns of a square lattice, which implies the conservation of the global dipole moment. In a certain regime, the model is non-integrable, but violates the eigenstate thermalization hypothesis through an extensive Hilbert space fragmentation, including an exponential number of inert subsectors with trivial dynamics, arising from kinetic constraints. While subsystem symmetries are quite restrictive for the dynamics, we show that they alone cannot account for such a number of inert states, even with infinite-range interactions. We present a procedure for constructing shielding structures that can separate and disentangle dynamically active regions from each other. Notably, subsystem symmetries allow the thickness of the shields to be dependent only on the interaction range rather than on the size of the active regions, unlike in the case of generic dipole-conserving systems. △ Less

Submitted 10 May, 2022; v1 submitted 20 July, 2021; originally announced July 2021.

Comments: 19 pages, 25 figures, Submission to SciPost

Journal ref: SciPost Phys. 13, 098 (2022)

Linear Invariants for Linear Systems

Authors: Ashish Tiwari

Abstract: A central question in verification is characterizing when a system has invariants of a certain form, and then synthesizing them. We say a system has a $k$ linear invariant, $k$-LI in short, if it has a conjunction of $k$ linear (non-strict) inequalities -- equivalently, an intersection of $k$ (closed) half spaces -- as an invariant. We present a sufficient condition -- solely in terms of eigenvalu… ▽ More A central question in verification is characterizing when a system has invariants of a certain form, and then synthesizing them. We say a system has a $k$ linear invariant, $k$-LI in short, if it has a conjunction of $k$ linear (non-strict) inequalities -- equivalently, an intersection of $k$ (closed) half spaces -- as an invariant. We present a sufficient condition -- solely in terms of eigenvalues of the $A$-matrix -- for an $n$-dimensional linear dynamical system to have a $k$-LI. Our proof of sufficiency is constructive, and we get a procedure that computes a $k$-LI if the condition holds. We also present a necessary condition, together with many example linear systems where either the sufficient condition, or the necessary is tight, and which show that the gap between the conditions is not easy to overcome. In practice, the gap implies that using our procedure, we synthesize $k$-LI for a larger value of $k$ than what might be necessary. Our result enables analysis of continuous and hybrid systems with linear dynamics in their modes solely using reasoning in the theory of linear arithmetic (polygons), without needing reasoning over nonlinear arithmetic (ellipsoids). △ Less

Submitted 18 July, 2021; originally announced July 2021.

Fast accurate approximation of convolutions with weakly singular kernel and its applications

Authors: Awanish Kumar Tiwari, Ambuj Pandey, Jagabandhu Paul, Akash Anand

Abstract: In this article, we present an $O(N \log N)$ rapidly convergent algorithm for the numerical approximation of the convolution integral with radially symmetric weakly singular kernels and compactly supported densities. To achieve the reduced computational complexity, we utilize the Fast Fourier Transform (FFT) on a uniform grid of size $N$ for approximating the convolution. To facilitate this and ma… ▽ More In this article, we present an $O(N \log N)$ rapidly convergent algorithm for the numerical approximation of the convolution integral with radially symmetric weakly singular kernels and compactly supported densities. To achieve the reduced computational complexity, we utilize the Fast Fourier Transform (FFT) on a uniform grid of size $N$ for approximating the convolution. To facilitate this and maintain the accuracy, we primarily rely on a periodic Fourier extension of the density with a suitably large period depending on the support of the density. The rate of convergence of the method increases with increasing smoothness of the periodic extension and, in fact, approximations exhibit super-algebraic convergence when the extension is infinitely differentiable. Furthermore, when the density has jump discontinuities, we utilize a certain Fourier smoothing technique to accelerate the convergence to achieve the quadratic rate in the overall approximation. Finally, we apply the integration scheme for numerical solution of certain partial differential equations. Moreover, we apply the quadrature to obtain a fast and high-order Nystöm solver for the solution of the Lippmann-Schwinger integral equation. We validate the performance of the proposed scheme in terms of accuracy as well as computational efficiency through a variety of numerical experiments. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 22 pages, 18 figures

MSC Class: 65R10; 65R20; 44A35; 35J05; 78A45; 31A10

A statistical study of propagating MHD kink waves in the quiescent corona

Authors: Ajay K. Tiwari, Richard J. Morton, James A. McLaughlin

Abstract: The Coronal Multi-channel Polarimeter (CoMP) has opened up exciting opportunities to probe transverse MHD waves in the Sun's corona. The archive of CoMP data is utilised to generate a catalogue of quiescent coronal loops that can be used for studying propagating kink waves. The catalogue contains 120 loops observed between 2012-2014. This catalogue is further used to undertake a statistical study… ▽ More The Coronal Multi-channel Polarimeter (CoMP) has opened up exciting opportunities to probe transverse MHD waves in the Sun's corona. The archive of CoMP data is utilised to generate a catalogue of quiescent coronal loops that can be used for studying propagating kink waves. The catalogue contains 120 loops observed between 2012-2014. This catalogue is further used to undertake a statistical study of propagating kink waves in the quiet regions of the solar corona, investigating phase speeds, loop lengths, footpoint power ratio and equilibrium parameter values. The statistical study enables us to establish the presence of a relationship between the rate of dam** and the length of the coronal loop, with longer coronal loops displaying weaker wave dam**. We suggest the reason for this behaviour is related to a decreasing average density contrast between the loop and ambient plasma as loop length increases. The catalogue presented here will provide the community with the foundation for the further study of propagating kink waves in the quiet solar corona. △ Less

Submitted 26 May, 2021; originally announced May 2021.

Comments: Submitted to ApJ

Weak dam** of propagating MHD kink waves in the quiescent corona

Authors: Richard J. Morton, Ajay K. Tiwari, Tom Van Doorsselaere, James A. McLaughlin

Abstract: Propagating transverse waves are thought to be a key transporter of Poynting flux throughout the Sun's atmosphere. Recent studies have shown that these transverse motions, interpreted as the magnetohydrodynamic kink mode, are prevalent throughout the corona. The associated energy estimates suggest the waves carry enough energy to meet the demands of the coronal radiative losses in the quiescent Su… ▽ More Propagating transverse waves are thought to be a key transporter of Poynting flux throughout the Sun's atmosphere. Recent studies have shown that these transverse motions, interpreted as the magnetohydrodynamic kink mode, are prevalent throughout the corona. The associated energy estimates suggest the waves carry enough energy to meet the demands of the coronal radiative losses in the quiescent Sun. However, it is still unclear how the waves deposit their energy into the coronal plasma. We present the results from a large-scale study of propagating kink waves in the quiescent corona using data from the Coronal Multi-channel Polarimeter (CoMP). The analysis reveals that the kink waves appear to be weakly damped, which would imply low rates of energy transfer from the large-scale transverse motions to smaller-scales via either uni-turbulence or resonant absorption. This raises questions about how the observed kink modes would deposit their energy into the coronal plasma. Moreover, these observations, combined with the results of Monte Carlo simulations, lead us to infer that the solar corona displays a spectrum of density ratios, with a smaller density ratio (relative to the ambient corona) in quiescent coronal loops and a higher density ratio in active region coronal loops. △ Less

Submitted 19 October, 2021; v1 submitted 25 May, 2021; originally announced May 2021.

Comments: 11 pages, 3 figures, Submitted

Semi-Supervised Classification and Segmentation on High Resolution Aerial Images

Authors: Sahil Khose, Abhiraj Tiwari, Ankita Ghosh

Abstract: FloodNet is a high-resolution image dataset acquired by a small UAV platform, DJI Mavic Pro quadcopters, after Hurricane Harvey. The dataset presents a unique challenge of advancing the damage assessment process for post-disaster scenarios using unlabeled and limited labeled dataset. We propose a solution to address their classification and semantic segmentation challenge. We approach this problem… ▽ More FloodNet is a high-resolution image dataset acquired by a small UAV platform, DJI Mavic Pro quadcopters, after Hurricane Harvey. The dataset presents a unique challenge of advancing the damage assessment process for post-disaster scenarios using unlabeled and limited labeled dataset. We propose a solution to address their classification and semantic segmentation challenge. We approach this problem by generating pseudo labels for both classification and segmentation during training and slowly incrementing the amount by which the pseudo label loss affects the final loss. Using this semi-supervised method of training helped us improve our baseline supervised loss by a huge margin for classification, allowing the model to generalize and perform better on the validation and test splits of the dataset. In this paper, we compare and contrast the various methods and models for image classification and semantic segmentation on the FloodNet dataset. △ Less

Submitted 24 June, 2021; v1 submitted 16 May, 2021; originally announced May 2021.

Comments: 5 pages, 2 tables, 1 figure

Stacked Deep Multi-Scale Hierarchical Network for Fast Bokeh Effect Rendering from a Single Image

Authors: Saikat Dutta, Sourya Dipta Das, Nisarg A. Shah, Anil Kumar Tiwari

Abstract: The Bokeh Effect is one of the most desirable effects in photography for rendering artistic and aesthetic photos. Usually, it requires a DSLR camera with different aperture and shutter settings and certain photography skills to generate this effect. In smartphones, computational methods and additional sensors are used to overcome the physical lens and sensor limitations to achieve such effect. Mos… ▽ More The Bokeh Effect is one of the most desirable effects in photography for rendering artistic and aesthetic photos. Usually, it requires a DSLR camera with different aperture and shutter settings and certain photography skills to generate this effect. In smartphones, computational methods and additional sensors are used to overcome the physical lens and sensor limitations to achieve such effect. Most of the existing methods utilized additional sensor's data or pretrained network for fine depth estimation of the scene and sometimes use portrait segmentation pretrained network module to segment salient objects in the image. Because of these reasons, networks have many parameters, become runtime intensive and unable to run in mid-range devices. In this paper, we used an end-to-end Deep Multi-Scale Hierarchical Network (DMSHN) model for direct Bokeh effect rendering of images captured from the monocular camera. To further improve the perceptual quality of such effect, a stacked model consisting of two DMSHN modules is also proposed. Our model does not rely on any pretrained network module for Monocular Depth Estimation or Saliency Detection, thus significantly reducing the size of model and run time. Stacked DMSHN achieves state-of-the-art results on a large scale EBB! dataset with around 6x less runtime compared to the current state-of-the-art model in processing HD quality images. △ Less

Submitted 15 May, 2021; originally announced May 2021.

Comments: Accepted to MAI workshop, CVPR 2021. Code and models: https://github.com/saikatdutta/Stacked_DMSHN_bokeh

Interpretability of Epidemiological Models : The Curse of Non-Identifiability

Authors: Ayush Deva, Siddhant Shingi, Avtansh Tiwari, Nayana Bannur, Sansiddh Jain, Jerome White, Alpan Raval, Srujana Merugu

Abstract: Interpretability of epidemiological models is a key consideration, especially when these models are used in a public health setting. Interpretability is strongly linked to the identifiability of the underlying model parameters, i.e., the ability to estimate parameter values with high confidence given observations. In this paper, we define three separate notions of identifiability that explore the… ▽ More Interpretability of epidemiological models is a key consideration, especially when these models are used in a public health setting. Interpretability is strongly linked to the identifiability of the underlying model parameters, i.e., the ability to estimate parameter values with high confidence given observations. In this paper, we define three separate notions of identifiability that explore the different roles played by the model definition, the loss function, the fitting methodology, and the quality and quantity of data. We define an epidemiological compartmental model framework in which we highlight these non-identifiability issues and their mitigation. △ Less

Submitted 30 April, 2021; originally announced April 2021.

Comments: 8 pages

BERT based Transformers lead the way in Extraction of Health Information from Social Media

Authors: Sidharth R, Abhiraj Tiwari, Parthivi Choubey, Saisha Kashyap, Sahil Khose, Kumud Lakara, Nishesh Singh, Ujjwal Verma

Abstract: This paper describes our submissions for the Social Media Mining for Health (SMM4H)2021 shared tasks. We participated in 2 tasks:(1) Classification, extraction and normalization of adverse drug effect (ADE) mentions in English tweets (Task-1) and (2) Classification of COVID-19 tweets containing symptoms(Task-6). Our approach for the first task uses the language representation model RoBERTa with a… ▽ More This paper describes our submissions for the Social Media Mining for Health (SMM4H)2021 shared tasks. We participated in 2 tasks:(1) Classification, extraction and normalization of adverse drug effect (ADE) mentions in English tweets (Task-1) and (2) Classification of COVID-19 tweets containing symptoms(Task-6). Our approach for the first task uses the language representation model RoBERTa with a binary classification head. For the second task, we use BERTweet, based on RoBERTa. Fine-tuning is performed on the pre-trained models for both tasks. The models are placed on top of a custom domain-specific processing pipeline. Our system ranked first among all the submissions for subtask-1(a) with an F1-score of 61%. For subtask-1(b), our system obtained an F1-score of 50% with improvements up to +8% F1 over the score averaged across all submissions. The BERTweet model achieved an F1 score of 94% on SMM4H 2021 Task-6. △ Less

Submitted 15 April, 2021; originally announced April 2021.

Comments: 6 pages, 1 figure

Giant $c$-axis nonlinear anomalous Hall effect in T$_d$-MoTe$_2$ and WTe$_2$

Authors: Archana Tiwari, Fangchu Chen, Shazhou Zhong, Elizabeth Drueke, Jahyun Koo, Austin Kaczmarek, Cong Xiao, **g**g Gao, Xuan Luo, Qian Niu, Yu** Sun, Binghai Yan, Liuyan Zhao, Adam W. Tsen

Abstract: While the anomalous Hall effect can manifest even without an external magnetic field, time reversal symmetry is nonetheless still broken by the internal magnetization of the sample. Recently, it has been shown that certain materials without an inversion center allow for a nonlinear type of anomalous Hall effect whilst retaining time reversal symmetry. The effect may arise from either Berry curvatu… ▽ More While the anomalous Hall effect can manifest even without an external magnetic field, time reversal symmetry is nonetheless still broken by the internal magnetization of the sample. Recently, it has been shown that certain materials without an inversion center allow for a nonlinear type of anomalous Hall effect whilst retaining time reversal symmetry. The effect may arise from either Berry curvature or through various asymmetric scattering mechanisms. Here, we report the observation of an extremely large $c$-axis nonlinear anomalous Hall effect in the non-centrosymmetric T$_d$ phase of MoTe$_2$ and WTe$_2$ without intrinsic magnetic order. We find that the effect is dominated by skew-scattering at higher temperatures combined with another scattering process active at low temperatures. Application of higher bias yields an extremely large Hall ratio of $E_\perp /E_\parallel$=2.47 and corresponding anomalous Hall conductivity of order 8x10$^7$S/m. △ Less

Submitted 12 March, 2021; originally announced March 2021.

Journal ref: Nat Commun 12, 2049 (2021)

Higher-order topological superconductors from Weyl semimetals

Authors: Ammar Jahin, Apoorv Tiwari, Yuxuan Wang

Abstract: We propose that doped Weyl semimetals with four Weyl points are natural candidates to realize higher-order topological superconductors, which exhibit a fully gapped bulk while the surface hosts robust gapless chiral hinge states. We show that in such a doped Weyl semimetal, a featureless finite-range attractive interaction favors a $p+ip$ pairing symmetry. By analyzing its topological properties,… ▽ More We propose that doped Weyl semimetals with four Weyl points are natural candidates to realize higher-order topological superconductors, which exhibit a fully gapped bulk while the surface hosts robust gapless chiral hinge states. We show that in such a doped Weyl semimetal, a featureless finite-range attractive interaction favors a $p+ip$ pairing symmetry. By analyzing its topological properties, we identify such a chiral pairing state as a higher-order topological superconductor, which depending on the existence of a four-fold roto-inversion symmetry $\mathsf{R}_{4z}$, is either intrinsic (meaning that the corresponding hinge states can only be removed by closing the bulk gap, rather than modifying the surface states) or extrinsic. We achieve this understanding via various methods recently developed for higher-order topology, including Wannier representability, Wannier spectrum, and defect classification approaches. For the $\mathsf{R}_{4z}$ symmetric case, we provide a complete classification of the higher-order topological superconductors. We show that such second-order topological superconductors exhibit chiral hinge modes that are robust in the absence of interaction effects but can be eliminated at the cost of introducing surface topological order. △ Less

Submitted 8 March, 2021; originally announced March 2021.

Comments: 20 pages, 14 figures

Journal ref: SciPost Phys. 12, 053 (2022)

A Control Function Approach to Estimate Panel Data Binary Response Model

Authors: Amaresh K Tiwari

Abstract: We propose a new control function (CF) method to estimate a binary response model in a triangular system with multiple unobserved heterogeneities The CFs are the expected values of the heterogeneity terms in the reduced form equations conditional on the histories of the endogenous and the exogenous variables. The method requires weaker restrictions compared to CF methods with similar imposed struc… ▽ More We propose a new control function (CF) method to estimate a binary response model in a triangular system with multiple unobserved heterogeneities The CFs are the expected values of the heterogeneity terms in the reduced form equations conditional on the histories of the endogenous and the exogenous variables. The method requires weaker restrictions compared to CF methods with similar imposed structures. If the support of endogenous regressors is large, average partial effects are point-identified even when instruments are discrete. Bounds are provided when the support assumption is violated. An application and Monte Carlo experiments compare several alternative methods with ours. △ Less

Submitted 15 September, 2021; v1 submitted 25 February, 2021; originally announced February 2021.

Journal ref: Econometric Reviews, 2021

Delhi air quality prediction using LSTM deep learning models with a focus on COVID-19 lockdown

Authors: Animesh Tiwari, Rishabh Gupta, Rohitash Chandra

Abstract: Air pollution has a wide range of implications on agriculture, economy, road accidents, and health. In this paper, we use novel deep learning methods for short-term (multi-step-ahead) air-quality prediction in selected parts of Delhi, India. Our deep learning methods comprise of long short-term memory (LSTM) network models which also include some recent versions such as bidirectional-LSTM and enco… ▽ More Air pollution has a wide range of implications on agriculture, economy, road accidents, and health. In this paper, we use novel deep learning methods for short-term (multi-step-ahead) air-quality prediction in selected parts of Delhi, India. Our deep learning methods comprise of long short-term memory (LSTM) network models which also include some recent versions such as bidirectional-LSTM and encoder-decoder LSTM models. We use a multivariate time series approach that attempts to predict air quality for 10 prediction horizons covering total of 80 hours and provide a long-term (one month ahead) forecast with uncertainties quantified. Our results show that the multivariate bidirectional-LSTM model provides best predictions despite COVID-19 impact on the air-quality during full and partial lockdown periods. The effect of COVID-19 on the air quality has been significant during full lockdown; however, there was unprecedented growth of poor air quality afterwards. △ Less

Submitted 21 February, 2021; originally announced February 2021.

Comments: Under review

Communication-free Cohesive Flexible-Object Transport using Decentralized Robot Networks

Authors: Yoshua Gombo, Anuj Tiwari, Santosh Devasia

Abstract: Decentralized network theories focus on achieving consensus and in speeding up the rate of convergence to consensus. However, network cohesion (i.e., maintaining consensus) during transitions between consensus values is also important when transporting flexible structures. Deviations in the robot positions due to loss of cohesion when moving flexible structures from one position to another, such a… ▽ More Decentralized network theories focus on achieving consensus and in speeding up the rate of convergence to consensus. However, network cohesion (i.e., maintaining consensus) during transitions between consensus values is also important when transporting flexible structures. Deviations in the robot positions due to loss of cohesion when moving flexible structures from one position to another, such as uncuredcomposite aircraft wings, can cause large deformations, which in turn, can result in potential damage. The major contribution of this work is to develop a decentralized approach to transport flexible objects in a cohesive manner using local force measurements, without the need for additional communication between the robots. Additionally, stability conditions are developed for discrete-time implementation of the proposed cohesive transition approach, and experimental results are presented, which show that the proposed cohesive transportation approach can reduce the relative deformations by 85% when compared to the case without it. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Comments: Submitted to ACC2021

Lieb-Schultz-Mattis type theorems for Majorana models with discrete symmetries

Authors: Ömer M. Aksoy, Apoorv Tiwari, Christopher Mudry

Abstract: We prove two Lieb-Schultz-Mattis type theorems that apply to any translationally invariant and local fermionic $d$-dimensional lattice Hamiltonian for which fermion-number conservation is broken down to the conservation of fermion parity. We show that when the internal symmetry group $G^{\,}_{f}$ is realized locally (in a repeat unit cell of the lattice) by a nontrivial projective representation,… ▽ More We prove two Lieb-Schultz-Mattis type theorems that apply to any translationally invariant and local fermionic $d$-dimensional lattice Hamiltonian for which fermion-number conservation is broken down to the conservation of fermion parity. We show that when the internal symmetry group $G^{\,}_{f}$ is realized locally (in a repeat unit cell of the lattice) by a nontrivial projective representation, then the ground state cannot be simultaneously nondegenerate, symmetric (with respect to lattice translations and $G^{\,}_{f}$), and gapped. We also show that when the repeat unit cell hosts an odd number of Majorana degrees of freedom and the cardinality of the lattice is even, then the ground state cannot be simultaneously nondegenerate, gapped, and translation symmetric. △ Less

Submitted 5 October, 2021; v1 submitted 16 February, 2021; originally announced February 2021.

Comments: 51 pages with 2 figures

Journal ref: Phys. Rev. B 104, 075146 (2021)

LS-HDIB: A Large Scale Handwritten Document Image Binarization Dataset

Authors: Kaustubh Sadekar, Ashish Tiwari, Prajwal Singh, Shanmuganathan Raman

Abstract: Handwritten document image binarization is challenging due to high variability in the written content and complex background attributes such as page style, paper quality, stains, shadow gradients, and non-uniform illumination. While the traditional thresholding methods do not effectively generalize on such challenging real-world scenarios, deep learning-based methods have performed relatively well… ▽ More Handwritten document image binarization is challenging due to high variability in the written content and complex background attributes such as page style, paper quality, stains, shadow gradients, and non-uniform illumination. While the traditional thresholding methods do not effectively generalize on such challenging real-world scenarios, deep learning-based methods have performed relatively well when provided with sufficient training data. However, the existing datasets are limited in size and diversity. This work proposes LS-HDIB - a large-scale handwritten document image binarization dataset containing over a million document images that span numerous real-world scenarios. Additionally, we introduce a novel technique that uses a combination of adaptive thresholding and seamless cloning methods to create the dataset with accurate ground truths. Through an extensive quantitative and qualitative evaluation over eight different deep learning based models, we demonstrate the enhancement in the performance of these models when trained on the LS-HDIB dataset and tested on unseen images. △ Less

Submitted 3 November, 2021; v1 submitted 27 January, 2021; originally announced January 2021.

droidlet: modular, heterogenous, multi-modal agents

Authors: Anurag Pratik, Soumith Chintala, Kavya Srinet, Dhiraj Gandhi, Rebecca Qian, Yuxuan Sun, Ryan Drew, Sara Elkafrawy, Anoushka Tiwari, Tucker Hart, Mary Williamson, Abhinav Gupta, Arthur Szlam

Abstract: In recent years, there have been significant advances in building end-to-end Machine Learning (ML) systems that learn at scale. But most of these systems are: (a) isolated (perception, speech, or language only); (b) trained on static datasets. On the other hand, in the field of robotics, large-scale learning has always been difficult. Supervision is hard to gather and real world physical interacti… ▽ More In recent years, there have been significant advances in building end-to-end Machine Learning (ML) systems that learn at scale. But most of these systems are: (a) isolated (perception, speech, or language only); (b) trained on static datasets. On the other hand, in the field of robotics, large-scale learning has always been difficult. Supervision is hard to gather and real world physical interactions are expensive. In this work we introduce and open-source droidlet, a modular, heterogeneous agent architecture and platform. It allows us to exploit both large-scale static datasets in perception and language and sophisticated heuristics often used in robotics; and provides tools for interactive annotation. Furthermore, it brings together perception, language and action onto one platform, providing a path towards agents that learn from the richness of real world interactions. △ Less

Submitted 25 January, 2021; originally announced January 2021.

Broken-Symmetry Ground States of the Heisenberg model on the Pyrochlore Lattice

Authors: Nikita Astrakhantsev, Tom Westerhout, Apoorv Tiwari, Kenny Choo, Ao Chen, Mark H. Fischer, Giuseppe Carleo, Titus Neupert

Abstract: The spin-1/2 Heisenberg model on the pyrochlore lattice is an iconic frustrated three-dimensional spin system with a rich phase diagram. Besides hosting several ordered phases, the model is debated to possess a spin-liquid ground state when only nearest-neighbor antiferromagnetic interactions are present. Here, we contest this hypothesis with an extensive numerical investigation using both exact d… ▽ More The spin-1/2 Heisenberg model on the pyrochlore lattice is an iconic frustrated three-dimensional spin system with a rich phase diagram. Besides hosting several ordered phases, the model is debated to possess a spin-liquid ground state when only nearest-neighbor antiferromagnetic interactions are present. Here, we contest this hypothesis with an extensive numerical investigation using both exact diagonalization and complementary variational techniques. Specifically, we employ a RVB-like many-variable Monte Carlo ansatz and convolutional neural network quantum states for (variational) calculations with up to $4\times 4^3$ and $4 \times 3^3$ spins, respectively. We demonstrate that these techniques yield consistent results, allowing for reliable extrapolations to the thermodynamic limit. Our main results are (1) the determination of the phase transition between the putative spin-liquid phase and the neighboring magnetically ordered phase and (2) a careful characterization of the ground state in terms of symmetry-breaking tendencies. We find clear indications of spontaneously broken inversion and rotational symmetry, calling the scenario of a featureless quantum spin-liquid into question. Our work showcases how many-variable variational techniques can be used to make progress in answering challenging questions about three-dimensional frustrated quantum magnets. △ Less

Submitted 15 November, 2021; v1 submitted 21 January, 2021; originally announced January 2021.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. X 11, 041021 (2021)

Towards a Topological Quantum Chemistry description of correlated systems: the case of the Hubbard diamond chain

Authors: Mikel Iraola, Niclas Heinsdorf, Apoorv Tiwari, Dominik Lessnich, Thomas Mertz, Francesco Ferrari, Mark H. Fischer, Stephen M. Winter, Frank Pollmann, Titus Neupert, Roser Valentí, Maia G. Vergniory

Abstract: The recently introduced topological quantum chemistry (TQC) framework has provided a description of universal topological properties of all possible band insulators in all space groups based on crystalline unitary symmetries and time reversal. While this formalism filled the gap between the mathematical classification and the practical diagnosis of topological materials, an obvious limitation is t… ▽ More The recently introduced topological quantum chemistry (TQC) framework has provided a description of universal topological properties of all possible band insulators in all space groups based on crystalline unitary symmetries and time reversal. While this formalism filled the gap between the mathematical classification and the practical diagnosis of topological materials, an obvious limitation is that it only applies to weakly interacting systems-which can be described within band theory. It is an open question to which extent this formalism can be generalized to correlated systems that can exhibit symmetry protected topological phases which are not adiabatically connected to any band insulator. In this work we address the many facettes of this question by considering the specific example of a Hubbard diamond chain. This model features a Mott insulator, a trivial insulating phase and an obstructed atomic limit phase. Here we discuss the nature of the Mott insulator and determine the phase diagram and topology of the interacting model with infinite density matrix renormalization group calculations, variational Monte Carlo simulations and with many-body topological invariants. We then proceed by considering a generalization of the TQC formalism to Green's functions combined with the concept of topological Hamiltonian to identify the topological nature of the phases, using cluster perturbation theory to calculate the Green's functions. The results are benchmarked with the above determined phase diagram and we discuss the applicability and limitations of the approach and its possible extensions. △ Less

Submitted 11 January, 2021; originally announced January 2021.

Comments: 16 pages, 13 figures

Hamiltonicity of doubly semi-equivelar maps on the torus

Authors: Yogendra Singh, Anand Kumar Tiwari, Seema Kushwaha

Abstract: The well-known twenty types of 2-uniform tilings of the plane give rise infinitely many doubly semi-equivelar maps on the torus. In this article, we show that every such doubly semi-equivelar map on the torus contains a Hamiltonian cycle. As a consequence, we establish the Nash-Williams conjecture for the graphs associated with these doubly semi-equivelar maps by showing that these graphs are eith… ▽ More The well-known twenty types of 2-uniform tilings of the plane give rise infinitely many doubly semi-equivelar maps on the torus. In this article, we show that every such doubly semi-equivelar map on the torus contains a Hamiltonian cycle. As a consequence, we establish the Nash-Williams conjecture for the graphs associated with these doubly semi-equivelar maps by showing that these graphs are either 3-connected or 4-connected. △ Less

Submitted 17 October, 2021; v1 submitted 7 January, 2021; originally announced January 2021.

Comments: 19. arXiv admin note: text overlap with arXiv:2005.00332

MSC Class: 52B70; 05C10; 05C45

SuperCell: A Wide-Area Coverage Solution Using High-Gain, High-Order Sectorized Antennas on Tall Towers

Authors: Pratheep Bondalapati, Abhishek Tiwari, Mustafa Emin Sahin, Qi Tang, Srishti Saraswat, Vishvas Suryakumar, Ali Yazdan, Julius Kusuma, Amit Dubey

Abstract: In this article we introduce a novel solution called SuperCell, which can improve the return on investment (ROI) for rural area network coverage. SuperCell offers two key technical features: it uses tall towers with high-gain antennas for wide coverage and high-order sectorization for high capacity. We show that a solution encompassing a high-elevation platform in excess of 200 meters increases co… ▽ More In this article we introduce a novel solution called SuperCell, which can improve the return on investment (ROI) for rural area network coverage. SuperCell offers two key technical features: it uses tall towers with high-gain antennas for wide coverage and high-order sectorization for high capacity. We show that a solution encompassing a high-elevation platform in excess of 200 meters increases coverage by 5x. Combined with dense frequency reuse by using as many as 36 azimuthal sectors from a single location, our solution can adequately serve the rural coverage and capacity demands. We validate this through propagation analysis, modeling, and experiments. The article gives a design perspective using different classes of antennas: Luneburg lens, active/passive phased array, and spatial multiplexing solutions. For each class, the corresponding analytical model of the resulting signal-to-interference plus noise ratio (SINR) based range and capacity prediction is presented. The spatial multiplexing solution is also validated through field measurements and additional 3D ray-tracing simulation. Finally, in this article we also shed light on two recent SuperCell field trials performed using a Luneburg lens antenna system. The trials took place in rural New Mexico and Mississippi. In the trials, we quantified the coverage and capacity of SuperCell in barren land and in a densely forested location, respectively. In the article, we demonstrate the results obtained in the trials and share the lessons learned regarding green-field and brown-field deployments. △ Less

Submitted 21 December, 2020; v1 submitted 30 November, 2020; originally announced December 2020.

CovidExplorer: A Multi-faceted AI-based Search and Visualization Engine for COVID-19 Information

Authors: Heer Ambavi, Kavita Vaishnaw, Udit Vyas, Abhisht Tiwari, Mayank Singh

Abstract: The entire world is engulfed in the fight against the COVID-19 pandemic, leading to a significant surge in research experiments, government policies, and social media discussions. A multi-modal information access and data visualization platform can play a critical role in supporting research aimed at understanding and develo** preventive measures for the pandemic. In this paper, we present a mul… ▽ More The entire world is engulfed in the fight against the COVID-19 pandemic, leading to a significant surge in research experiments, government policies, and social media discussions. A multi-modal information access and data visualization platform can play a critical role in supporting research aimed at understanding and develo** preventive measures for the pandemic. In this paper, we present a multi-faceted AI-based search and visualization engine, CovidExplorer. Our system aims to help researchers understand current state-of-the-art COVID-19 research, identify research articles relevant to their domain, and visualize real-time trends and statistics of COVID-19 cases. In contrast to other existing systems, CovidExplorer also brings in India-specific topical discussions on social media to study different aspects of COVID-19. The system, demo video, and the datasets are available at http://covidexplorer.in. △ Less

Submitted 30 November, 2020; originally announced November 2020.

Comments: 4 pages, 7 figures, The associated system can be accessed at http://covidexplorer.in, To be published in the Proceedings of the 29th ACM International Conference on Information and Knowledge Management (CIKM '20) (October 19-23, 2020)(Virtual Event, Ireland)

Minimum Variance Embedded Auto-associative Kernel Extreme Learning Machine for One-class Classification

Authors: Pratik K. Mishra, Chandan Gautam, Aruna Tiwari

Abstract: One-class classification (OCC) needs samples from only a single class to train the classifier. Recently, an auto-associative kernel extreme learning machine was developed for the OCC task. This paper introduces a novel extension of this classifier by embedding minimum variance information within its architecture and is referred to as VAAKELM. The minimum variance embedding forces the network outpu… ▽ More One-class classification (OCC) needs samples from only a single class to train the classifier. Recently, an auto-associative kernel extreme learning machine was developed for the OCC task. This paper introduces a novel extension of this classifier by embedding minimum variance information within its architecture and is referred to as VAAKELM. The minimum variance embedding forces the network output weights to focus in regions of low variance and reduces the intra-class variance. This leads to a better separation of target samples and outliers, resulting in an improvement in the generalization performance of the classifier. The proposed classifier follows a reconstruction-based approach to OCC and minimizes the reconstruction error by using the kernel extreme learning machine as the base classifier. It uses the deviation in reconstruction error to identify the outliers. We perform experiments on 15 small-size and 10 medium-size one-class benchmark datasets to demonstrate the efficiency of the proposed classifier. We compare the results with 13 existing one-class classifiers by considering the mean F1 score as the comparison metric. The experimental results show that VAAKELM consistently performs better than the existing classifiers, making it a viable alternative for the OCC task. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Rubber adhesion and friction: role of surface energy and contamination films

Authors: A. Tiwari, T. Tolpekina, Hans van Benthem, M. K. Gunnewiek, B. N. J. Persson

Abstract: We study the influence of the surface energy and contamination films on rubber adhesion and sliding friction. We find that there is a transfer of molecules from the rubber to the substrate which reduces the work of adhesion and makes the rubber friction insensitive to the substrate surface energy. We show that there is no simple relation between adhesion and friction: adhesion is due to (vertical)… ▽ More We study the influence of the surface energy and contamination films on rubber adhesion and sliding friction. We find that there is a transfer of molecules from the rubber to the substrate which reduces the work of adhesion and makes the rubber friction insensitive to the substrate surface energy. We show that there is no simple relation between adhesion and friction: adhesion is due to (vertical) detachment processes at the edge of the contact regions (opening crack propagation), while friction in many cases is determined mainly by (tangential) stick-slip instabilities of nanosized regions, within the whole sliding contact. Thus while the pull-off force in fluids may be strongly reduced (due to a reduction of the work of adhesion), the sliding friction may be only slightly affected as the area of real contact may be dry, and the frictional shear stress in the contact area nearly unaffected by the fluid. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Comments: 13 pages, 21 figures

Joint Turn and Dialogue level User Satisfaction Estimation on Multi-Domain Conversations

Authors: Praveen Kumar Bodigutla, Aditya Tiwari, Josep Valls Vargas, Lazaros Polymenakos, Spyros Matsoukas

Abstract: Dialogue level quality estimation is vital for optimizing data driven dialogue management. Current automated methods to estimate turn and dialogue level user satisfaction employ hand-crafted features and rely on complex annotation schemes, which reduce the generalizability of the trained models. We propose a novel user satisfaction estimation approach which minimizes an adaptive multi-task loss fu… ▽ More Dialogue level quality estimation is vital for optimizing data driven dialogue management. Current automated methods to estimate turn and dialogue level user satisfaction employ hand-crafted features and rely on complex annotation schemes, which reduce the generalizability of the trained models. We propose a novel user satisfaction estimation approach which minimizes an adaptive multi-task loss function in order to jointly predict turn-level Response Quality labels provided by experts and explicit dialogue-level ratings provided by end users. The proposed BiLSTM based deep neural net model automatically weighs each turn's contribution towards the estimated dialogue-level rating, implicitly encodes temporal dependencies, and removes the need to hand-craft features. On dialogues sampled from 28 Alexa domains, two dialogue systems and three user groups, the joint dialogue-level satisfaction estimation model achieved up to an absolute 27% (0.43->0.70) and 7% (0.63->0.70) improvement in linear correlation performance over baseline deep neural net and benchmark Gradient boosting regression models, respectively. △ Less

Submitted 8 October, 2020; v1 submitted 6 October, 2020; originally announced October 2020.

Comments: Findings of EMNLP, 2020

Using Machine Learning to Develop a Novel COVID-19 Vulnerability Index (C19VI)

Authors: Anuj Tiwari, Arya V. Dadhania, Vijay Avin Balaji Ragunathrao, Edson R. A. Oliveira

Abstract: COVID19 is now one of the most leading causes of death in the United States. Systemic health, social and economic disparities have put the minorities and economically poor communities at a higher risk than others. There is an immediate requirement to develop a reliable measure of county-level vulnerabilities that can capture the heterogeneity of both vulnerable communities and the COVID19 pandemic… ▽ More COVID19 is now one of the most leading causes of death in the United States. Systemic health, social and economic disparities have put the minorities and economically poor communities at a higher risk than others. There is an immediate requirement to develop a reliable measure of county-level vulnerabilities that can capture the heterogeneity of both vulnerable communities and the COVID19 pandemic. This study reports a COVID19 Vulnerability Index (C19VI) for identification and map** of vulnerable counties in the United States. We proposed a Random Forest machine learning based COVID19 vulnerability model using CDC sociodemographic and COVID19-specific themes. An innovative COVID19 Impact Assessment algorithm was also developed using homogeneity and trend assessment technique for evaluating severity of the pandemic in all counties and train RF model. Developed C19VI was statistically validated and compared with the CDC COVID19 Community Vulnerability Index (CCVI). Finally, using C19VI along with census data, we explored racial inequalities and economic disparities in COVID19 health outcomes amongst different regions in the United States. Our C19VI index indicates that 18.30% of the counties falls into very high vulnerability class, 24.34% in high, 23.32% in moderate, 22.34% in low, and 11.68% in very low. Furthermore, C19VI reveals that 75.57% of racial minorities and 82.84% of economically poor communities are very high or high COVID19 vulnerable regions. The proposed approach of vulnerability modeling takes advantage of both the well-established field of statistical analysis and the fast-evolving domain of machine learning. C19VI provides an accurate and more reliable way to measure county level vulnerability in the United States. This index aims at hel** emergency planners to develop more effective mitigation strategies especially for the disproportionately impacted communities. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Learning semantic Image attributes using Image recognition and knowledge graph embeddings

Authors: Ashutosh Tiwari, Sandeep Varma

Abstract: Extracting structured knowledge from texts has traditionally been used for knowledge base generation. However, other sources of information, such as images can be leveraged into this process to build more complete and richer knowledge bases. Structured semantic representation of the content of an image and knowledge graph embeddings can provide a unique representation of semantic relationships bet… ▽ More Extracting structured knowledge from texts has traditionally been used for knowledge base generation. However, other sources of information, such as images can be leveraged into this process to build more complete and richer knowledge bases. Structured semantic representation of the content of an image and knowledge graph embeddings can provide a unique representation of semantic relationships between image entities. Linking known entities in knowledge graphs and learning open-world images using language models has attracted lots of interest over the years. In this paper, we propose a shared learning approach to learn semantic attributes of images by combining a knowledge graph embedding model with the recognized attributes of images. The proposed model premises to help us understand the semantic relationship between the entities of an image and implicitly provide a link for the extracted entities through a knowledge graph embedding model. Under the limitation of using a custom user-defined knowledge base with limited data, the proposed model presents significant accuracy and provides a new alternative to the earlier approaches. The proposed approach is a step towards bridging the gap between frameworks which learn from large amounts of data and frameworks which use a limited set of predicates to infer new knowledge. △ Less

Submitted 12 September, 2020; originally announced September 2020.

Comments: 7 Pages, 6 figures, Accepted at Future Technologies Conference (FTC) 2020, Vancouver, Canada

Unconventional transverse transport above and below the magnetic transition temperature in Weyl semimetal EuCd$_2$As$_2$

Authors: Y. Xu, L. Das, J. Z. Ma, C. J. Yi, S. M. Nie, Y. G. Shi, A. Tiwari, S. S. Tsirkin, T. Neupert, M. Medarde, M. Shi, J. Chang, T. Shang

Abstract: As exemplified by the growing interest in the quantum anomalous Hall effect, the research on topology as an organizing principle of quantum matter is greatly enriched from the interplay with magnetism. In this vein, we present a combined electrical and thermoelectrical transport study on the magnetic Weyl semimetal EuCd$_2$As$_2$. Unconventional contribution to the anomalous Hall and anomalous Ner… ▽ More As exemplified by the growing interest in the quantum anomalous Hall effect, the research on topology as an organizing principle of quantum matter is greatly enriched from the interplay with magnetism. In this vein, we present a combined electrical and thermoelectrical transport study on the magnetic Weyl semimetal EuCd$_2$As$_2$. Unconventional contribution to the anomalous Hall and anomalous Nernst effects were observed both above and below the magnetic transition temperature of EuCd$_2$As$_2$, indicating the existence of significant Berry curvature. EuCd$_2$As$_2$ represents a rare case in which this unconventional transverse transport emerges both above and below the magnetic transition temperature in the same material. The transport properties evolve with temperature and field in the antiferromagnetic phase in a different manner than in the paramagnetic phase, suggesting different mechanisms to their origin. Our results indicate EuCd$_2$As$_2$ is a fertile playground for investigating the interplay between magnetism and topology, and potentially a plethora of topologically nontrivial phases rooted in this interplay. △ Less

Submitted 27 January, 2021; v1 submitted 12 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. Lett. 126, 076602 (2021)

Electrochemical oxidation of CO on Cu single crystals under alkaline conditions

Authors: Aarti Tiwari, Hendrik H. Heenen, Anton Simon Bjørnlund, Degenhart Hochfilzer, Karen Chan, Sebastian Horch

Abstract: We perform a joint experimental-theoretical study of the electrochemical oxidation of CO on copper (Cu) under alkaline conditions. Using cyclic voltammetry on Cu single crystal surfaces, we demonstrate that both Cu terraces and steps show CO oxidation activity at potentials just slightly positive (0.03-0.14 V) of the thermodynamic equilibrium potential. The overpotentials are 0.23-0.12 V lower tha… ▽ More We perform a joint experimental-theoretical study of the electrochemical oxidation of CO on copper (Cu) under alkaline conditions. Using cyclic voltammetry on Cu single crystal surfaces, we demonstrate that both Cu terraces and steps show CO oxidation activity at potentials just slightly positive (0.03-0.14 V) of the thermodynamic equilibrium potential. The overpotentials are 0.23-0.12 V lower than that of gold (approx. 0.26 V), which up until now has been considered to be the most active catalyst for this process. Our theoretical calculations suggest that Cu's activity arises from the advantageous combination of simultaneous *OH adsorption under CO oxidation potentials and surmountable *CO-*OH coupling barriers. Experimentally observed onset potentials are in agreement with the computed onsets of *OH adsorption. We furthermore show that the onsets of *OH adsorption on steps are more affected by *CO-*OH interactions than on terraces due to a stronger competitive adsorption. Overall, Cu(100) shows the lowest overpotential (0.03 V) of the facets considered. △ Less

Submitted 6 October, 2020; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 16 pages, 3 figures plus supplementary information

A Large Scale Analysis of Android-Web Hybridization

Authors: Abhishek Tiwari, Jyoti Prakash, Sascha Gross, Christian Hammer

Abstract: Many Android applications embed webpages via WebView components and execute JavaScript code within Android. Hybrid applications leverage dedicated APIs to load a resource and render it in a WebView. Furthermore, Android objects can be shared with the JavaScript world. However, bridging the interfaces of the Android and JavaScript world might also incur severe security threats: Potentially untruste… ▽ More Many Android applications embed webpages via WebView components and execute JavaScript code within Android. Hybrid applications leverage dedicated APIs to load a resource and render it in a WebView. Furthermore, Android objects can be shared with the JavaScript world. However, bridging the interfaces of the Android and JavaScript world might also incur severe security threats: Potentially untrusted webpages and their JavaScript might interfere with the Android environment and its access to native features. No general analysis is currently available to assess the implications of such hybrid apps bridging the two worlds. To understand the semantics and effects of hybrid apps, we perform a large-scale study on the usage of the hybridization APIs in the wild. We analyze and categorize the parameters to hybridization APIs for 7,500 randomly selected and the 196 most popular applications from the Google Playstore as well as 1000 malware samples. Our results advance the general understanding of hybrid applications, as well as implications for potential program analyses, and the current security situation: We discovered thousands of flows of sensitive data from Android to JavaScript, the vast majority of which could flow to potentially untrustworthy code. Our analysis identified numerous web pages embedding vulnerabilities, which we exemplarily exploited. Additionally, we discovered a multitude of applications in which potentially untrusted JavaScript code may interfere with (trusted) Android objects, both in benign and malign applications. △ Less

Submitted 4 August, 2020; v1 submitted 4 August, 2020; originally announced August 2020.

Cylinder-flat contact mechanics with surface roughness

Authors: A. Tiwari, B. N. J. Persson

Abstract: We study the nominal (ensemble averaged) contact pressure $p(x)$ acting on a cylinder squeezed in contact with an elastic half-space with random surface roughness. The contact pressure is Hertzian-like for $α< 0.01$ and Gaussian-like for $α> 10$, where the dimensionless parameter $α= h_{\rm rms}/δ$ is the ratio between the root-mean-square roughness amplitude and the penetration for the smooth sur… ▽ More We study the nominal (ensemble averaged) contact pressure $p(x)$ acting on a cylinder squeezed in contact with an elastic half-space with random surface roughness. The contact pressure is Hertzian-like for $α< 0.01$ and Gaussian-like for $α> 10$, where the dimensionless parameter $α= h_{\rm rms}/δ$ is the ratio between the root-mean-square roughness amplitude and the penetration for the smooth surfaces case (Hertz contact). △ Less

Submitted 27 July, 2020; originally announced July 2020.

Comments: 6 pages, 5 figures. arXiv admin note: text overlap with arXiv:2007.13576

Fluid leakage in metallic seals

Authors: F. J. Fischer, K. Schmitz, A. Tiwari, B. N. J. Persson

Abstract: Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic deformation would occur one expects in most cases large fluid flow channels between the contacting metallic bodies, and large fluid leakage. However, in most applications… ▽ More Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic deformation would occur one expects in most cases large fluid flow channels between the contacting metallic bodies, and large fluid leakage. However, in most applications plastic deformation occurs, at least at the asperity level, which allows the surfaces to approach each other to such an extent that fluid leakage often can be neglected. In this study, we present an experimental set-up for studying the fluid leakage in metallic seals. We study the water leakage between a steel sphere and a steel body (seat) with a conical surface. The experimental results are found to be in good quantitative agreement with a (fitting-parameter-free) theoretical model. The theory predicts that the plastic deformations reduce the leak-rate by a factor $\approx 8$ △ Less

Submitted 27 July, 2020; originally announced July 2020.

Comments: 10 pages, 10 figures

Two comments on adhesion

Authors: A. Tiwari, J. Wang, B. N. J. Persson

Abstract: The adhesion paradox refers to the observation that for most solid objects no adhesion can be detected when they are separated from a state of molecular contact. The adhesion paradox results from surface roughness, and we present experimental and theoretical results which shows that adhesion in most cases is "killed" by the longest wavelength roughness. Adhesion experiments between a human finger… ▽ More The adhesion paradox refers to the observation that for most solid objects no adhesion can be detected when they are separated from a state of molecular contact. The adhesion paradox results from surface roughness, and we present experimental and theoretical results which shows that adhesion in most cases is "killed" by the longest wavelength roughness. Adhesion experiments between a human finger and a clean glass plate were carried out, and for a dry finger, no macroscopic adhesion occurred. We suggest that the observed decrease in the contact area with increasing shear force results from non-adhesive finger-glass contact mechanics, involving large deformations of a complex layered material. △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 6 Pages, 9 figures. arXiv admin note: text overlap with arXiv:2002.02226

Journal ref: Phys. Rev. E 102, 042803 (2020)

Cylinder-flat contact mechanics during sliding

Authors: J. Wang, A. Tiwari, I. M. Sivebaek, B. N. J. Persson

Abstract: Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastic block (cylinder) with a ${\rm cos} (q_0 x)$ surface height profile is sliding in adhesive contact on a rigid flat substrate.The atoms on the block interact with the substrate atoms by Lennard-Jones (LJ) potentials, and we consider both commensurate and(nearly) incommensurate contacts… ▽ More Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastic block (cylinder) with a ${\rm cos} (q_0 x)$ surface height profile is sliding in adhesive contact on a rigid flat substrate.The atoms on the block interact with the substrate atoms by Lennard-Jones (LJ) potentials, and we consider both commensurate and(nearly) incommensurate contacts. For the incommensurate system the friction force fluctuates between positive and negative values, with an amplitude proportional to the sliding speed, but with the average close to zero. For the commensurate system the (time-averaged) friction force is much larger and nearly velocity independent. For both type of systems the width of the contact region is velocity independent even when, for the commensurate case, the frictional shear stress increases from zero (before sliding) to $\approx 0.1 \ {\rm MPa}$ during sliding. This frictional shear stress, and the elastic modulus used, are typical for Polydimethylsiloxan (PDMS) rubber sliding on a glass surface, and we conclude that the reduction in the contact area observed in some experiments when increasing the tangential force must be due to effects not included in our model study, such as viscoelasticity or elastic nonlinearity △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 6 pages , 7 figures

Journal ref: Phys. Rev. E 102, 043002 (2020)

Rapid Transitions with Robust Accelerated Delayed Self Reinforcement for Consensus-Based Networks

Authors: Anuj Tiwari, Santosh Devasia

Abstract: Rapid transitions are important for quick response of consensus-based, multi-agent networks to external stimuli. While high-gain can increase response speed, potential instability tends to limit the maximum possible gain, and therefore, limits the maximum convergence rate to consensus during transitions. Since the update law for multi-agent networks with symmetric graphs can be considered as the g… ▽ More Rapid transitions are important for quick response of consensus-based, multi-agent networks to external stimuli. While high-gain can increase response speed, potential instability tends to limit the maximum possible gain, and therefore, limits the maximum convergence rate to consensus during transitions. Since the update law for multi-agent networks with symmetric graphs can be considered as the gradient of its Laplacian-potential function, Nesterov-type accelerated-gradient approaches from optimization theory, can further improve the convergence rate of such networks. An advantage of the accelerated-gradient approach is that it can be implemented using accelerated delayed-self-reinforcement (A-DSR), which does not require new information from the network nor modifications in the network connectivity. However, the accelerated-gradient approach is not directly applicable to general directed graphs since the update law is not the gradient of the Laplacian-potential function. The main contribution of this work is to extend the accelerated-gradient approach to general directed graph networks, without requiring the graph to be strongly connected. Additionally, while both the momentum term and outdated-feedback term in the accelerated-gradient approach are important in general, it is shown that the momentum term alone is sufficient to achieve balanced robustness and rapid transitions without oscillations in the dominant mode, for networks whose graph Laplacians have real spectrum. Simulation results are presented to illustrate the performance improvement with the proposed Robust A-DSR of 40% in structural robustness and 50% in convergence rate to consensus, when compared to the case without the A-DSR. Moreover, experimental results are presented that show a similar 37% faster convergence with the Robust A-DSR when compared to the case without the A-DSR. △ Less

Submitted 2 November, 2020; v1 submitted 29 June, 2020; originally announced June 2020.

Comments: 14 pages, 8 figures

Journal ref: IEEE Transactions on Control Systems Technology ( Volume: 29, Issue: 5, Sept. 2021)

Bias-corrected climate projections from Coupled Model Intercomparison Project-6 (CMIP6) for South Asia

Authors: Vimal Mishra, Udit Bhatia, Amar Deep Tiwari

Abstract: Climate change is likely to pose enormous challenges for agriculture, water resources, infrastructure, and livelihood of millions of people living in South Asia. Here, we develop daily bias-corrected data of precipitation, maximum and minimum temperatures at 0.25° spatial resolution for South Asia (India, Pakistan, Bangladesh, Nepal, Bhutan, and Sri Lanka) and 18 river basins located in the Indian… ▽ More Climate change is likely to pose enormous challenges for agriculture, water resources, infrastructure, and livelihood of millions of people living in South Asia. Here, we develop daily bias-corrected data of precipitation, maximum and minimum temperatures at 0.25° spatial resolution for South Asia (India, Pakistan, Bangladesh, Nepal, Bhutan, and Sri Lanka) and 18 river basins located in the Indian sub-continent. The bias-corrected dataset is developed using Empirical Quantile Map** (EQM) for the historic (1951-2014) and projected (2015-2100) climate for the four scenarios (SSP126, SSP245, SSP370, SSP585) using output from 13 CMIP6-GCMs. The bias-corrected dataset was evaluated against the observations for both mean and extremes of precipitation, maximum and minimum temperatures. Bias corrected projections from 13 CMIP6-GCMs project a warmer (3-5°C) and wetter (13-30%) climate in South Asia in the 21st century. The bias-corrected projections from CMIP6-GCMs can be used for climate change impact assessment in South Asia and hydrologic impact assessment in the sub-continental river basins. △ Less

Submitted 5 June, 2020; originally announced June 2020.