-
ML-based Real-Time Control at the Edge: An Approach Using hls4ml
Authors:
R. Shi,
S. Ogrenci,
J. M. Arnold,
J. R. Berlioz,
P. Hanlet,
K. J. Hazelwood,
M. A. Ibrahim,
H. Liu,
V. P. Nagaslaev,
A. Narayanan 1,
D. J. Nicklaus,
J. Mitrevski,
G. Pradhan,
A. L. Saewert,
B. A. Schupbach,
K. Seiya,
M. Thieme,
R. M. Thurman-Keup,
N. V. Tran
Abstract:
This study focuses on implementing a real-time control system for a particle accelerator facility that performs high energy physics experiments. A critical operating parameter in this facility is beam loss, which is the fraction of particles deviating from the accelerated proton beam into a cascade of secondary particles. Accelerators employ a large number of sensors to monitor beam loss. The data…
▽ More
This study focuses on implementing a real-time control system for a particle accelerator facility that performs high energy physics experiments. A critical operating parameter in this facility is beam loss, which is the fraction of particles deviating from the accelerated proton beam into a cascade of secondary particles. Accelerators employ a large number of sensors to monitor beam loss. The data from these sensors is monitored by human operators who predict the relative contribution of different sub-systems to the beam loss. Using this information, they engage control interventions. In this paper, we present a controller to track this phenomenon in real-time using edge-Machine Learning (ML) and support control with low latency and high accuracy. We implemented this system on an Intel Arria 10 SoC. Optimizations at the algorithm, high-level synthesis, and interface levels to improve latency and resource usage are presented. Our design implements a neural network, which can predict the main source of beam loss (between two possible causes) at speeds up to 575 frames per second (fps) (average latency of 1.74 ms). The practical deployed system is required to operate at 320 fps, with a 3ms latency requirement, which has been met by our design successfully.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Synchronous High-frequency Distributed Readout For Edge Processing At The Fermilab Main Injector And Recycler
Authors:
J. R. Berlioz,
M. R. Austin,
J. M. Arnold,
K. J. Hazelwood,
P. Hanlet,
M. A. Ibrahim,
A. Narayanan,
D. J. Nicklaus,
G. Praudhan,
A. L. Saewert,
B. A. Schupbach,
K. Seiya,
R. M. Thurman-Keup,
N. V. Tran,
J. Jang,
H. Liu,
S. Memik,
R. Shi,
M. Thieme,
D. Ulusel
Abstract:
The Main Injector (MI) was commissioned using data acquisition systems developed for the Fermilab Main Ring in the 1980s. New VME-based instrumentation was commissioned in 2006 for beam loss monitors (BLM)[2], which provided a more systematic study of the machine and improved displays of routine operation. However, current projects are demanding more data and at a faster rate from this aging hardw…
▽ More
The Main Injector (MI) was commissioned using data acquisition systems developed for the Fermilab Main Ring in the 1980s. New VME-based instrumentation was commissioned in 2006 for beam loss monitors (BLM)[2], which provided a more systematic study of the machine and improved displays of routine operation. However, current projects are demanding more data and at a faster rate from this aging hardware. One such project, Real-time Edge AI for Distributed Systems (READS), requires the high-frequency, low-latency collection of synchronized BLM readings from around the approximately two-mile accelerator complex. Significant work has been done to develop new hardware to monitor the VME backplane and broadcast BLM measurements over Ethernet, while not disrupting the existing operations critical functions of the BLM system. This paper will detail the design, implementation, and testing of this parallel data pathway.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Accelerator Real-time Edge AI for Distributed Systems (READS) Proposal
Authors:
K. Seiya,
K. J. Hazelwood,
M. A. Ibrahim,
V. P. Nagaslaev,
D. J. Nicklaus,
B. A. Schupbach,
R. M. Thurman-Keup,
N. V. Tran,
H. Liu,
S. Memik
Abstract:
Our objective will be to integrate ML into Fermilab accelerator operations and furthermore provide an accessible framework which can also be used by a broad range of other accelerator systems with dynamic tuning needs. We will develop of real-time accelerator control using embedded ML on-chip hardware and fast communication between distributed systems in this proposal. We will demonstrate this tec…
▽ More
Our objective will be to integrate ML into Fermilab accelerator operations and furthermore provide an accessible framework which can also be used by a broad range of other accelerator systems with dynamic tuning needs. We will develop of real-time accelerator control using embedded ML on-chip hardware and fast communication between distributed systems in this proposal. We will demonstrate this technology for the Mu2e experiment by increasing the overall duty factor and uptime of the experiment through two synergistic projects. First, we will use deep reinforcement learning techniques to improve the performance of the regulation loop through guided optimization to provide stable proton beams extracted from the Delivery Ring to the Mu2e experiment. This requires the development of a digital twin of the system to model the accelerator and develop real-time ML algorithms. Second, we will use de-blending techniques to disentangle and classify overlap** beam losses in the Main Injector and Recycler Ring to reduce overall beam downtime in each machine. This ML model will be deployed within a semi-autonomous operational mode. Both applications require processing at the millisecond scale and will share similar ML-in-hardware techniques and beam instrumentation readout technology. A collaboration between Fermilab and Northwestern University will pull together the talents and resources of accelerator physicists, beam instrumentation engineers, embedded system architects, FPGA board design experts, and ML experts to solve complex real-time accelerator controls challenges which will enhance the physics program. More broadly, the framework developed for Accelerator Real-time Edge AI Distributed Systems (READS) can be applied to future projects as the accelerator complex is upgraded for the PIP-II and DUNE era.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
TeV/m Nano-Accelerator: Current Status of CNT-Channeling Acceleration Experiment
Authors:
Y. M. Shin,
A. H. Lumpkin,
J. C. Thangaraj,
R. M. Thurman-Keup,
V. Shiltsev
Abstract:
Crystal channeling technology has offered various opportunities in the accelerator community with a viability of ultrahigh gradient (TV/m) acceleration for future HEP collider. The major challenge of channeling acceleration is that ultimate acceleration gradients might require a high power driver in the hard x-ray regime (~ 40 keV). This x-ray energy exceeds those for x-rays as of today, although…
▽ More
Crystal channeling technology has offered various opportunities in the accelerator community with a viability of ultrahigh gradient (TV/m) acceleration for future HEP collider. The major challenge of channeling acceleration is that ultimate acceleration gradients might require a high power driver in the hard x-ray regime (~ 40 keV). This x-ray energy exceeds those for x-rays as of today, although x-ray lasers can efficiently excite solid plasma and accelerate particles inside a crystal channel. Moreover, only disposable crystal accelerators are possible at such high externally excited fields which would exceed the ionization thresholds destroying the atomic structure, so acceleration will take place only in a short time before full dissociation of the lattice. Carbon-based nanostructures have great potential with a wide range of flexibility and superior physical strength, which can be applied to channeling acceleration. This paper presents a beam-driven channeling acceleration concept with CNTs and discusses feasible experiments with the Advanced Superconducting Test Accelerator (ASTA) in Fermilab.
△ Less
Submitted 4 May, 2017;
originally announced May 2017.
-
Ultra-High Gradient Channeling Acceleration in Nanostructures: Design/Progress of Proof-of-Concept (POC) Experiments
Authors:
Y. M. Shin,
A. Green,
A. H. Lumpkin,
R. M. Thurman-Keup,
V. Shiltsev,
X. Zhang,
D. M. -A. Farinella,
P. Taborek,
T. Tajima,
J. A. Wheeler,
G. Mourou
Abstract:
This paper describes simulation analyses on beam and laser (X-ray)-driven accelerations in effective nanotube models obtained from Vsim and EPOCH codes. Experimental setups to detect wakefields are also outlined with accelerator facilities at Fermilab and NIU. In the FAST facility, the electron beamline was successfully commissioned at 50 MeV and it is being upgraded toward higher energies for ele…
▽ More
This paper describes simulation analyses on beam and laser (X-ray)-driven accelerations in effective nanotube models obtained from Vsim and EPOCH codes. Experimental setups to detect wakefields are also outlined with accelerator facilities at Fermilab and NIU. In the FAST facility, the electron beamline was successfully commissioned at 50 MeV and it is being upgraded toward higher energies for electron accelerator R&D. The 50 MeV injector beamline of the facility is used for X-ray crystal-channeling radiation with a diamond target. It has been proposed to utilize the same diamond crystal for a channeling acceleration POC test. Another POC experiment is also designed for the NIU accelerator lab with time-resolved electron diffraction. Recently, a stable generation of single-cycle laser pulses with tens of Petawatt power based on thin film compression (TFC) technique has been investigated for target normal sheath acceleration (TNSA) and radiation pressure acceleration (RPA). The experimental plan with a nanometer foil is discussed with an available test facility such as Extreme Light Infrastructure - Nuclear Physics (ELI-NP).
△ Less
Submitted 27 December, 2016;
originally announced December 2016.
-
TeV/m Nano-Accelerator: Investigation on Feasibility of CNT-Channeling Acceleration at Fermilab
Authors:
Y. M. Shin,
A. H. Lumpkin,
R. M. Thurman-Keup
Abstract:
The development of high gradient acceleration and tight phase-space control of high power beams is a key element for future lepton and hadron colliders since the increasing demands for higher energy and luminosity significantly raise costs of modern HEP facilities. Atomic channels in crystals are known to consist of 10 -- 100 V/Å potential barriers capable of guiding and collimating a high energy…
▽ More
The development of high gradient acceleration and tight phase-space control of high power beams is a key element for future lepton and hadron colliders since the increasing demands for higher energy and luminosity significantly raise costs of modern HEP facilities. Atomic channels in crystals are known to consist of 10 -- 100 V/Å potential barriers capable of guiding and collimating a high energy beam providing continuously focused acceleration with exceptionally high gradients (TeV/m). However, channels in natural crystals are only angstrom-size and physically vulnerable to high energy interactions, which has prevented crystals from being applied to high power accelerators. Carbon-based nano-crystals such as carbon-nanotubes (CNTs) and graphenes have a large degree of dimensional flexibility and thermo-mechanical strength, which could be suitable for channeling acceleration of MW beams. Nano-channels of the synthetic crystals can accept a few orders of magnitude larger phase-space volume of channeled particles with much higher thermal tolerance than natural crystals. This paper presents the current status of CNT-channeling acceleration research at the Advanced Superconducting Test Accelerator (ASTA) in Fermilab.
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
