-
Readout-induced suppression and enhancement of superconducting qubit lifetimes
Authors:
Ted Thorbeck,
Zhihao Xiao,
Archana Kamal,
Luke C. G. Govia
Abstract:
It has long been known that the lifetimes of superconducting qubits suffer during readout, increasing readout errors. We show that this degradation is due to the anti-Zeno effect, as readout-induced dephasing broadens the qubit so that it overlaps 'hot spots' of strong dissipation, likely due to two-level systems in the qubit's bath. Using a flux-tunable qubit to probe the qubit's frequency depend…
▽ More
It has long been known that the lifetimes of superconducting qubits suffer during readout, increasing readout errors. We show that this degradation is due to the anti-Zeno effect, as readout-induced dephasing broadens the qubit so that it overlaps 'hot spots' of strong dissipation, likely due to two-level systems in the qubit's bath. Using a flux-tunable qubit to probe the qubit's frequency dependent loss, we accurately predict the change in lifetime during readout with a new self-consistent master equation that incorporates the modification to qubit relaxation due to measurement-induced dephasing. Moreover, we controllably demonstrate both the Zeno and anti-Zeno effects, which explain suppression and the rarer enhancement of qubit lifetimes during readout.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
TLS Dynamics in a Superconducting Qubit Due to Background Ionizing Radiation
Authors:
Ted Thorbeck,
Andrew Eddins,
Isaac Lauer,
Douglas T. McClure,
Malcolm Carroll
Abstract:
Superconducting qubit lifetimes must be both long and stable to provide an adequate foundation for quantum computing. This stability is imperiled by two-level systems (TLSs), currently a dominant loss mechanism, which exhibit slow spectral dynamics that destabilize qubit lifetimes on hour timescales. Stability is also threatened at millisecond timescales, where ionizing radiation has recently been…
▽ More
Superconducting qubit lifetimes must be both long and stable to provide an adequate foundation for quantum computing. This stability is imperiled by two-level systems (TLSs), currently a dominant loss mechanism, which exhibit slow spectral dynamics that destabilize qubit lifetimes on hour timescales. Stability is also threatened at millisecond timescales, where ionizing radiation has recently been found to cause bursts of correlated multi-qubit decays, complicating quantum error correction. Here we study both ionizing radiation and TLS dynamics on a 27-qubit processor, repurposing the standard transmon qubits as sensors of both radiation impacts and TLS dynamics. Unlike prior literature, we observe resilience of the qubit lifetimes to the transient quasiparticles generated by the impact of radiation. However, we also observe a new interaction between these two processes, "TLS scrambling," in which a radiation impact causes multiple TLSs to jump in frequency, which we suggest is due to the same charge rearrangement sensed by qubits near a radiation impact. As TLS scrambling brings TLSs out of or in to resonance with the qubit, the lifetime of the qubit increases or decreases. Our findings thus identify radiation as a new contribution to fluctuations in qubit lifetimes, with implications for efforts to characterize and improve device stability
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Matching and maximum likelihood decoding of a multi-round subsystem quantum error correction experiment
Authors:
Neereja Sundaresan,
Theodore J. Yoder,
Youngseok Kim,
Muyuan Li,
Edward H. Chen,
Grace Harper,
Ted Thorbeck,
Andrew W. Cross,
Antonio D. Córcoles,
Maika Takita
Abstract:
Quantum error correction offers a promising path for performing quantum computations with low errors. Although a fully fault-tolerant execution of a quantum algorithm remains unrealized, recent experimental developments, along with improvements in control electronics, are enabling increasingly advanced demonstrations of the necessary operations for applying quantum error correction. Here, we perfo…
▽ More
Quantum error correction offers a promising path for performing quantum computations with low errors. Although a fully fault-tolerant execution of a quantum algorithm remains unrealized, recent experimental developments, along with improvements in control electronics, are enabling increasingly advanced demonstrations of the necessary operations for applying quantum error correction. Here, we perform quantum error correction on superconducting qubits connected in a heavy-hexagon lattice. The full processor can encode a logical qubit with distance three and perform several rounds of fault-tolerant syndrome measurements that allow the correction of any single fault in the circuitry. Furthermore, by using dynamic circuits and classical computation as part of our syndrome extraction protocols, we can exploit real-time feedback to reduce the impact of energy relaxation error in the syndrome and flag qubits. We show that the logical error varies depending on the use of a perfect matching decoder compared to a maximum likelihood decoder. We observe a logical error per syndrome measurement round as low as $\sim0.04$ for the matching decoder and as low as $\sim0.03$ for the maximum likelihood decoder. Our results suggest that more significant improvements to decoders are likely on the horizon as quantum hardware has reached a new stage of development towards fully fault-tolerant operations.
△ Less
Submitted 19 April, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Digital coherent control of a superconducting qubit
Authors:
Edward Leonard Jr.,
Matthew A. Beck,
JJ Nelson,
Brad G. Christensen,
Ted Thorbeck,
Caleb Howington,
Alexander Opremcak,
Ivan V. Pechenezhskiy,
Kenneth Dodge,
Nicholas P. Dupuis,
Jaseung Ku,
Francisco Schlenker,
Joseph Suttle,
Christopher Wilen,
Shaojiang Zhu,
Maxim G. Vavilov,
Britton L. T. Plourde,
Robert McDermott
Abstract:
High-fidelity gate operations are essential to the realization of a fault-tolerant quantum computer. In addition, the physical resources required to implement gates must scale efficiently with system size. A longstanding goal of the superconducting qubit community is the tight integration of a superconducting quantum circuit with a proximal classical cryogenic control system. Here we implement coh…
▽ More
High-fidelity gate operations are essential to the realization of a fault-tolerant quantum computer. In addition, the physical resources required to implement gates must scale efficiently with system size. A longstanding goal of the superconducting qubit community is the tight integration of a superconducting quantum circuit with a proximal classical cryogenic control system. Here we implement coherent control of a superconducting transmon qubit using a Single Flux Quantum (SFQ) pulse driver cofabricated on the qubit chip. The pulse driver delivers trains of quantized flux pulses to the qubit through a weak capacitive coupling; coherent rotations of the qubit state are realized when the pulse-to-pulse timing is matched to a multiple of the qubit oscillation period. We measure the fidelity of SFQ-based gates to be ~95% using interleaved randomized benchmarking. Gate fidelities are limited by quasiparticle generation in the dissipative SFQ driver. We characterize the dissipative and dispersive contributions of the quasiparticle admittance and discuss mitigation strategies to suppress quasiparticle poisoning. These results open the door to integration of large-scale superconducting qubit arrays with SFQ control elements for low-latency feedback and stabilization.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Measurement of a Superconducting Qubit with a Microwave Photon Counter
Authors:
A. Opremcak,
I. V. Pechenezhskiy,
C. Howington,
B. G. Christensen,
M. A. Beck,
E. Leonard Jr.,
J. Suttle,
C. Wilen,
K. N. Nesterov,
G. J. Ribeill,
T. Thorbeck,
F. Schlenker,
M. G. Vavilov,
B. L. T. Plourde,
R. McDermott
Abstract:
Fast, high-fidelity measurement is a key ingredient for quantum error correction. Conventional approaches to the measurement of superconducting qubits, involving linear amplification of a microwave probe tone followed by heterodyne detection at room temperature, do not scale well to large system sizes. Here we introduce an alternative approach to measurement based on a microwave photon counter. We…
▽ More
Fast, high-fidelity measurement is a key ingredient for quantum error correction. Conventional approaches to the measurement of superconducting qubits, involving linear amplification of a microwave probe tone followed by heterodyne detection at room temperature, do not scale well to large system sizes. Here we introduce an alternative approach to measurement based on a microwave photon counter. We demonstrate raw single-shot measurement fidelity of 92%. Moreover, we exploit the intrinsic dam** of the counter to extract the energy released by the measurement process, allowing repeated high-fidelity quantum non-demolition measurements. Crucially, our scheme provides access to the classical outcome of projective quantum measurement at the millikelvin stage. In a future system, counter-based measurement could form the basis for a scalable quantum-to-classical interface.
△ Less
Submitted 2 March, 2018;
originally announced March 2018.
-
Reverse isolation and backaction of the SLUG microwave amplifier
Authors:
T. Thorbeck,
S. Zhu,
E. Leonard Jr.,
R. Barends,
J. Kelly,
John M. Martinis,
R. McDermott
Abstract:
An ideal preamplifier for qubit measurement must not only provide high gain and near quantum-limited noise performance, but also isolate the delicate quantum circuit from noisy downstream measurement stages while producing negligible backaction. Here we use a Superconducting Low-inductance Undulatory Galvanometer (SLUG) microwave amplifier to read out a superconducting transmon qubit, and we chara…
▽ More
An ideal preamplifier for qubit measurement must not only provide high gain and near quantum-limited noise performance, but also isolate the delicate quantum circuit from noisy downstream measurement stages while producing negligible backaction. Here we use a Superconducting Low-inductance Undulatory Galvanometer (SLUG) microwave amplifier to read out a superconducting transmon qubit, and we characterize both reverse isolation and measurement backaction of the SLUG. For appropriate dc bias, the SLUG achieves reverse isolation that is better than that of a commercial cryogenic isolator. Moreover, SLUG backaction is dominated by thermal emission from dissipative elements in the device. When the SLUG is operated in pulsed mode, it is possible to characterize the transmon qubit using a measurement chain that is free from cryogenic isolators or circulators with no measurable degradation of qubit performance.
△ Less
Submitted 3 May, 2017;
originally announced May 2017.
-
Formation of Strain-Induced Quantum Dots in Gated Semiconductor Nanostructures
Authors:
Ted Thorbeck,
Neil M. Zimmerman
Abstract:
Elastic strain changes the energies of the conduction band in a semiconductor, which will affect transport through a semiconductor nanostructure. We show that the typical strains in a semiconductor nanostructure from metal gates are large enough to create strain-induced quantum dots (QDs). We simulate a commonly used QD device architecture, metal gates on bulk silicon, and show the formation of st…
▽ More
Elastic strain changes the energies of the conduction band in a semiconductor, which will affect transport through a semiconductor nanostructure. We show that the typical strains in a semiconductor nanostructure from metal gates are large enough to create strain-induced quantum dots (QDs). We simulate a commonly used QD device architecture, metal gates on bulk silicon, and show the formation of strain-induced QDs. The strain-induced QD can be eliminated by replacing the metal gates with poly-silicon gates. Thus strain can be as important as electrostatics to QD device operation operation.
△ Less
Submitted 11 September, 2014;
originally announced September 2014.
-
High Fidelity Qubit Readout with the Superconducting Low-Inductance Undulatory Galvanometer Microwave Amplifier
Authors:
D. Hover,
S. Zhu,
T. Thorbeck,
G. J. Ribeill,
D. Sank,
J. Kelly,
R. Barends,
John M. Martinis,
R. McDermott
Abstract:
We describe the high fidelity dispersive measurement of a superconducting qubit using a microwave amplifier based on the Superconducting Low-inductance Undulatory Galvanometer (SLUG). The SLUG preamplifier achieves gain of 19 dB and yields a signal-to-noise ratio improvement of 9 dB over a state-of-the-art HEMT amplifier. We demonstrate a separation fidelity of 99% at 700 ns compared to 59% with t…
▽ More
We describe the high fidelity dispersive measurement of a superconducting qubit using a microwave amplifier based on the Superconducting Low-inductance Undulatory Galvanometer (SLUG). The SLUG preamplifier achieves gain of 19 dB and yields a signal-to-noise ratio improvement of 9 dB over a state-of-the-art HEMT amplifier. We demonstrate a separation fidelity of 99% at 700 ns compared to 59% with the HEMT alone. The SLUG displays a large dynamic range, with an input saturation power corresponding to 700 photons in the readout cavity.
△ Less
Submitted 29 December, 2013;
originally announced December 2013.
-
Simulating Capacitances to Silicon Quantum Dots: Breakdown of the Parallel Plate Capacitor Model
Authors:
Ted Thorbeck,
Akira Fujiwara,
Neil M. Zimmerman
Abstract:
Many electrical applications of quantum dots rely on capacitively coupled gates; therefore, to make reliable devices we need those gate capacitances to be predictable and reproducible. We demonstrate in silicon nanowire quantum dots that gate capacitances are reproducible to within 10% for nominally identical devices. We demonstrate the experimentally that gate capacitances scale with device dimen…
▽ More
Many electrical applications of quantum dots rely on capacitively coupled gates; therefore, to make reliable devices we need those gate capacitances to be predictable and reproducible. We demonstrate in silicon nanowire quantum dots that gate capacitances are reproducible to within 10% for nominally identical devices. We demonstrate the experimentally that gate capacitances scale with device dimensions. We also demonstrate that a capacitance simulator can be used to predict measured gate capacitances to within 20%. A simple parallel plate capacitor model can be used to predict how the capacitances change with device dimensions; however, the parallel plate capacitor model fails for the smallest devices because the capacitances are dominated by fringing fields. We show how the capacitances due to fringing fields can be quickly estimated.
△ Less
Submitted 2 July, 2012;
originally announced July 2012.
-
Determining the Location and Cause of Unintentional Quantum Dots in a Nanowire
Authors:
Ted Thorbeck,
Neil M. Zimmerman
Abstract:
We determine the locations of unintentional quantum dots (U-QDs) in a silicon nanowire with a precision of a few nanometers by comparing the capacitances to multiple gates with a capacitance simulation. Because we observe U-QDs in the same location of the wire in multiple devices, their cause is likely to be an unintended consequence of the fabrication, not random atomic-scale defects as is typica…
▽ More
We determine the locations of unintentional quantum dots (U-QDs) in a silicon nanowire with a precision of a few nanometers by comparing the capacitances to multiple gates with a capacitance simulation. Because we observe U-QDs in the same location of the wire in multiple devices, their cause is likely to be an unintended consequence of the fabrication, not random atomic-scale defects as is typically assumed. The locations of the U-QDs appear consistent with conduction band modulation from strain from the oxide and the gates. This allows us to suggest methods to reduce the frequency of U-QDs.
△ Less
Submitted 24 January, 2012;
originally announced January 2012.
