-
Modelling Political Coalition Negotiations Using LLM-based Agents
Authors:
Farhad Moghimifar,
Yuan-Fang Li,
Robert Thomson,
Gholamreza Haffari
Abstract:
Coalition negotiations are a cornerstone of parliamentary democracies, characterised by complex interactions and strategic communications among political parties. Despite its significance, the modelling of these negotiations has remained unexplored with the domain of Natural Language Processing (NLP), mostly due to lack of proper data. In this paper, we introduce coalition negotiations as a novel…
▽ More
Coalition negotiations are a cornerstone of parliamentary democracies, characterised by complex interactions and strategic communications among political parties. Despite its significance, the modelling of these negotiations has remained unexplored with the domain of Natural Language Processing (NLP), mostly due to lack of proper data. In this paper, we introduce coalition negotiations as a novel NLP task, and model it as a negotiation between large language model-based agents. We introduce a multilingual dataset, POLCA, comprising manifestos of European political parties and coalition agreements over a number of elections in these countries. This dataset addresses the challenge of the current scope limitations in political negotiation modelling by providing a diverse, real-world basis for simulation. Additionally, we propose a hierarchical Markov decision process designed to simulate the process of coalition negotiation between political parties and predict the outcomes. We evaluate the performance of state-of-the-art large language models (LLMs) as agents in handling coalition negotiations, offering insights into their capabilities and paving the way for future advancements in political modelling.
△ Less
Submitted 18 February, 2024;
originally announced February 2024.
-
Hubble Asteroid Hunter III. Physical properties of newly found asteroids
Authors:
Pablo García-Martín,
Sandor Kruk,
Marcel Popescu,
Bruno Merín,
Karl R. Stapelfeldt,
Robin W. Evans,
Benoit Carry,
Ross Thomson
Abstract:
Determining the size distribution of asteroids is key for understanding the collisional history and evolution of the inner Solar System. We aim at improving our knowledge on the size distribution of small asteroids in the Main Belt by determining the parallaxes of newly detected asteroids in the Hubble Space Telescope (HST) Archive and hence their absolute magnitudes and sizes. Asteroids appear as…
▽ More
Determining the size distribution of asteroids is key for understanding the collisional history and evolution of the inner Solar System. We aim at improving our knowledge on the size distribution of small asteroids in the Main Belt by determining the parallaxes of newly detected asteroids in the Hubble Space Telescope (HST) Archive and hence their absolute magnitudes and sizes. Asteroids appear as curved trails in HST images due to the parallax induced by the fast orbital motion of the spacecraft. The parallax effect can be computed to obtain the distance to the asteroids by fitting simulated trajectories to the observed trails. Using distance, we can obtain the object's absolute magnitude and size estimation assuming an albedo value, along with some boundaries for its orbital parameters. In this work we analyse a set of 632 serendipitously imaged asteroids found in the ESA HST Archive. An object-detection machine learning algorithm was used to perform this task during previous work. Our raw data consists of 1,031 asteroids trails from unknown objects (not matching any entries in the MPC database). We also found 670 trails from known objects (objects featuring matching entries in the MPC). After an accuracy assessment and filtering process, our analysed HST set consists of 454 unknown objects and 178 known objects. We obtain a sample dominated by potential Main Belt objects featuring absolute magnitudes (H) mostly between 15 and 22 mag. The absolute magnitude cumulative distribution confirms the previously reported slope change for 15 < H < 18, from 0.56 to 0.26, maintained in our case down to absolute magnitudes around H = 20, hence expanding the previous results by approximately two magnitudes. HST archival observations can be used as an asteroid survey since the telescope pointings are statistically randomly oriented in the sky and they cover long periods of time.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers
Authors:
Bangshan Sun,
Simon Moser,
Alexander Jesacher,
Patrick S. Salter,
Robert R. Thomson,
Martin J. Booth
Abstract:
Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototy**. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the lase…
▽ More
Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototy**. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the laser focal shape while also achieving high scanning speed and high refractive index contrast. Here, we introduce the theory of a refractive index modification scheme that combines the advantages of both traditional non-thermal and thermal regime fabrication methods. We also propose a model of waveguide formation that was verified through a thorough study on the effects of phase aberrations on the laser focus. The presented new photonic chip fabrication scheme uses a novel focal intensity distribution, where pulse energy is relocated to the bottom of a laser focus by manipulating primary and higher order spherical aberrations. The technique can produce index modifications with high scanning speed (20 mm/s or higher), high index contrast (16 x 10-3), and high precision to fabricate with arbitrary cross-sections. This method has potential to expand the capabilities of photonic chips in applications that require small-scale, high precision, or high contrast refractive index control.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
A primal-dual data-driven method for computational optical imaging with a photonic lantern
Authors:
Carlos Santos Garcia,
Mathilde Larchevêque,
Solal O'Sullivan,
Martin Van Waerebeke,
Robert R. Thomson,
Audrey Repetti,
Jean-Christophe Pesquet
Abstract:
Optical fibres aim to image in-vivo biological processes. In this context, high spatial resolution and stability to fibre movements are key to enable decision-making processes (e.g., for microendoscopy). Recently, a single-pixel imaging technique based on a multicore fibre photonic lantern has been designed, named computational optical imaging using a lantern (COIL). A proximal algorithm based on…
▽ More
Optical fibres aim to image in-vivo biological processes. In this context, high spatial resolution and stability to fibre movements are key to enable decision-making processes (e.g., for microendoscopy). Recently, a single-pixel imaging technique based on a multicore fibre photonic lantern has been designed, named computational optical imaging using a lantern (COIL). A proximal algorithm based on a sparsity prior, dubbed SARA-COIL, has been further proposed to solve the associated inverse problem, to enable image reconstructions for high resolution COIL microendoscopy. In this work, we develop a data-driven approach for COIL. We replace the sparsity prior in the proximal algorithm by a learned denoiser, leading to a plug-and-play (PnP) algorithm. The resulting PnP method, based on a proximal primal-dual algorithm, enables to solve the Morozov formulation of the inverse problem. We use recent results in learning theory to train a network with desirable Lipschitz properties, and we show that the resulting primal-dual PnP algorithm converges to a solution to a monotone inclusion problem. Our simulations highlight that the proposed data-driven approach improves the reconstruction quality over variational SARA-COIL method on both simulated and real data.
△ Less
Submitted 17 April, 2024; v1 submitted 20 June, 2023;
originally announced June 2023.
-
Multiscale Monte Carlo simulations of gold nanoparticle dose-enhanced radiotherapy II. Cellular dose enhancement within macroscopic tumor models
Authors:
Martin P. Martinov,
Elizabeth M. Fletcher,
Rowan M. Thomson
Abstract:
Purpose: To develop and apply multiscale Monte Carlo (MC) simulations to assess variations in nucleus and cytoplasm dose enhancement factors (n,cDEFs) over tumor-scale volumes. Methods: The intrinsic variation of n,cDEFs (due to variations in local gold concentration and cell/nucleus size) are estimated via MC modeling of varied cellular GNP uptake and cell/nucleus sizes. Then, a Heterogeneous Mul…
▽ More
Purpose: To develop and apply multiscale Monte Carlo (MC) simulations to assess variations in nucleus and cytoplasm dose enhancement factors (n,cDEFs) over tumor-scale volumes. Methods: The intrinsic variation of n,cDEFs (due to variations in local gold concentration and cell/nucleus size) are estimated via MC modeling of varied cellular GNP uptake and cell/nucleus sizes. Then, a Heterogeneous MultiScale (HetMS) model is implemented by combining detailed models of populations of cells containing GNPs with simplified tissue models to evaluate n,cDEFs. Simulations of tumors with spatially-uniform and -varying gold concentrations are performed to determine n,cDEFs as a function of distance from the source. All simulations are performed for three different GNP configurations: GNPs distributed around the nucleus or packed into one or four endosome(s). Results: Intrinsic variations in n,cDEFs can be substantial with changes in GNP uptake and cell/nucleus radii. In HetMS models of tumors, sub-unity n,cDEFs (dose decreases) can occur for low energies and high gold concentrations due to attenuation of primary photons through the gold. In HetMS simulations of tumors with spatially-uniform gold concentrations, n,cDEFs decrease with depth into the tumor as photons are attenuated, with relative differences between GNP models remaining approximately constant with depth in the tumor. Similar initial n,cDEF decreases with radius are seen in tumors with spatially-varying gold concentrations, but n,cDEFs for all configurations converge to a single value for each energy as gold concentration reaches zero. Conclusions: These results demonstrate that cellular doses are highly sensitive to cell/nucleus size, GNP intracellular distribution, gold concentration, and cell position in the tumor. This work demonstrates the importance of proper choice of computational model when simulating GNPT scenarios.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Multiscale Monte Carlo simulations of gold nanoparticle dose-enhanced radiotherapy I. Cellular dose enhancement in microscopic models
Authors:
Martin P. Martinov,
Elizabeth M. Fletcher,
Rowan M. Thomson
Abstract:
Purpose: The introduction of Gold NanoParticles (GNPs) in radiotherapy requires consideration of GNP size, location, and quantity, and more, as well as beam quality. The work is presented in two parts, with Part I (this work) investigating accurate and efficient MC modeling to calculate nucleus and cytoplasm Dose Enhancement Factors (n,cDEFs). Part II then evaluates cell dose enhancement factors a…
▽ More
Purpose: The introduction of Gold NanoParticles (GNPs) in radiotherapy requires consideration of GNP size, location, and quantity, and more, as well as beam quality. The work is presented in two parts, with Part I (this work) investigating accurate and efficient MC modeling to calculate nucleus and cytoplasm Dose Enhancement Factors (n,cDEFs). Part II then evaluates cell dose enhancement factors across macroscopic length scales. Methods: Different methods of modeling gold within cells are compared: a contiguous volume of either pure gold or gold-tissue mixture or discrete GNPs. MC simulations with EGSnrc are performed to calculate n,cDEF for a cell considering 10 to 370 keV incident photons, gold concentrations from 4 to 24~mg of gold per gram, and three different GNP configurations: GNPs distributed around the surface of the nucleus or packed into one or four endosomes. Results: n,cDEFs are sensitive to the model of gold in the cell, with differences of up to 17% observed between models. Across cell/nucleus radii, source energies, and gold concentrations, n,cDEF are highest for GNPs in the perinuclear configuration, compared with GNPs in endosomes. Across all simulations of the default cell, nDEFs and cDEFs range from one to 6.83 and 3.87, respectively. If the cell size is changed, much higher n,cDEFs are observed. n,cDEF are maximized at photon energies at or just above the K- or L-edges of gold. Conclusions: This work demonstrates many physics trends on DEFs at the cellular level, including that cellular DEFs are sensitive to gold modeling approach, GNP configuration, cell/nucleus size, gold concentration, and incident source energy. These data will allow one to optimize or estimate DEF using not only GNP uptake, but account for incident photon energy and intracellular configuration of GNPs. Part II will expand the investigation, applying the cell model in cm-scale phantoms.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
The James Webb Space Telescope Mission
Authors:
Jonathan P. Gardner,
John C. Mather,
Randy Abbott,
James S. Abell,
Mark Abernathy,
Faith E. Abney,
John G. Abraham,
Roberto Abraham,
Yasin M. Abul-Huda,
Scott Acton,
Cynthia K. Adams,
Evan Adams,
David S. Adler,
Maarten Adriaensen,
Jonathan Albert Aguilar,
Mansoor Ahmed,
Nasif S. Ahmed,
Tanjira Ahmed,
Rüdeger Albat,
Loïc Albert,
Stacey Alberts,
David Aldridge,
Mary Marsha Allen,
Shaune S. Allen,
Martin Altenburg
, et al. (983 additional authors not shown)
Abstract:
Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astrono…
▽ More
Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Measuring Classification Decision Certainty and Doubt
Authors:
Alexander M. Berenbeim,
Iain J. Cruickshank,
Susmit Jha,
Robert H. Thomson,
Nathaniel D. Bastian
Abstract:
Quantitative characterizations and estimations of uncertainty are of fundamental importance in optimization and decision-making processes. Herein, we propose intuitive scores, which we call certainty and doubt, that can be used in both a Bayesian and frequentist framework to assess and compare the quality and uncertainty of predictions in (multi-)classification decision machine learning problems.
Quantitative characterizations and estimations of uncertainty are of fundamental importance in optimization and decision-making processes. Herein, we propose intuitive scores, which we call certainty and doubt, that can be used in both a Bayesian and frequentist framework to assess and compare the quality and uncertainty of predictions in (multi-)classification decision machine learning problems.
△ Less
Submitted 27 March, 2023; v1 submitted 25 March, 2023;
originally announced March 2023.
-
Update of the CLRP Monte Carlo TG-43 parameter database for high-energy brachytherapy sources
Authors:
Habib Safigholi,
Marc J. P. Chamberland,
Randle E. P. Taylor,
Martin P. Martinov,
D. W. O. Rogers,
Rowan M. Thomson
Abstract:
PURPOSE: To update and extend version 2 of the Carleton Laboratory for Radiotherapy Physics (CLRP) TG-43 dosimetry database (CLRP_TG43v2) for 33 high-energy (HE, $\geq50$~keV) brachytherapy sources using egs_brachy, an open-source EGSnrc application. A comprehensive dataset of TG-43 parameters is compiled, including detailed source descriptions, dose-rate constants, radial dose functions, 1D and 2…
▽ More
PURPOSE: To update and extend version 2 of the Carleton Laboratory for Radiotherapy Physics (CLRP) TG-43 dosimetry database (CLRP_TG43v2) for 33 high-energy (HE, $\geq50$~keV) brachytherapy sources using egs_brachy, an open-source EGSnrc application. A comprehensive dataset of TG-43 parameters is compiled, including detailed source descriptions, dose-rate constants, radial dose functions, 1D and 2D anisotropy functions, along-away dose-rate tables, Primary and Scatter Separated (PSS) dose tables, and mean photon energies esca** each source. The database also documents the source models which will be freely distributed with egs_brachy. ACQUISITION AND VALIDATION METHODS: Datasets are calculated after a recoding of the source geometries using the egs++ geometry package and its egs_brachy extensions. Air kerma per history is calculated in a 10x10x0.05 cm3 voxel located 100 cm from the source along the transverse axis and then corrected for the lateral and thickness dimensions of the scoring voxel to give the air kerma on the central axis at a point 100cm from the source's mid-point. Full-scatter water phantoms with varying voxel resolutions in cylindrical coordinates are used for dose calculations. For validation, data are compared to those from CLRP_TG43v1 and published data. DATA FORMAT AND ACCESS: Data are available at https://physics.carleton.ca/clrp/egs_brachy/seed_database_HDRv2 or http://doi.org/10.22215/clrp/tg43v2. POTENTIAL APPLICATIONS: The CLRP_TG43v2 database has applications in research, dosimetry, and brachytherapy planning. This comprehensive update provides the medical physics community with more precise and in some cases more accurate Monte Carlo TG-43 dose calculation parameters, as well as fully benchmarked and described source models which are distributed with egs_brachy.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Near-field Probing of Optical Superchirality for Enhanced Bio-detection
Authors:
Victor Tabouillot,
Rahul Kumar,
Paula L. Lalaguna,
Maryam Hajji,
Rebecca Clarke,
Affar Karimullah,
Andrew R. Thomson,
Andrew Sutherland,
Nikolaj Gadegaard,
Shun Hashiyada,
Malcolm Kadodwala
Abstract:
Nanophotonic platforms in theory uniquely enable < femtomoles of chiral biological and pharmaceutical molecules to be detected, through the highly localised changes in the chiral asymmetries of the near-fields that they induce. However, current chiral nanophotonic based strategies are intrinsically limited because they rely on far-field optical measurements that are sensitive to a much larger near…
▽ More
Nanophotonic platforms in theory uniquely enable < femtomoles of chiral biological and pharmaceutical molecules to be detected, through the highly localised changes in the chiral asymmetries of the near-fields that they induce. However, current chiral nanophotonic based strategies are intrinsically limited because they rely on far-field optical measurements that are sensitive to a much larger near-field volume, than that influenced by the chiral molecules. Consequently, they depend on detecting small changes in far-field optical response restricting detection sensitivities. Here we exploit an intriguing phenomenon, plasmonic circularly polarised luminescence (PCPL), which is an incisive local probe of near-field chirality. This allows chiral detection of monolayer quantities of a de novo designed peptide, which is not achieved with a far-field response. Our work demonstrates that by leveraging the capabilities of nanophotonic platforms with the near-field sensitivity of PCPL, optimal biomolecular detection performance can be achieved, opening new avenues for nanometrology.
△ Less
Submitted 15 May, 2022;
originally announced May 2022.
-
High resolution TCSPC imaging of diffuse light with a one-dimensional SPAD array scanning system
Authors:
E. P. McShane,
H. K. Chandrasekharan,
A. Kufcsák,
N. Finlayson,
A. T. Erdogan,
R. K. Henderson,
K. Dhaliwal,
R. R. Thomson,
M. G. Tanner
Abstract:
We report a time-resolved single photon counting (TCSPC) imaging system based on a line-scanning architecture. The system benefits from the high fill-factor, active area, and large dimension of an advanced CMOS single photon avalanche diode (SPAD) array line-sensor. A two-dimensional image is constructed using a moving mirror to scan the line-sensor field-of-view (FOV) across the target, to enable…
▽ More
We report a time-resolved single photon counting (TCSPC) imaging system based on a line-scanning architecture. The system benefits from the high fill-factor, active area, and large dimension of an advanced CMOS single photon avalanche diode (SPAD) array line-sensor. A two-dimensional image is constructed using a moving mirror to scan the line-sensor field-of-view (FOV) across the target, to enable the efficient acquisition of a two-dimensional 0.26 Mpixel TCSPC image. We demonstrate the capabilities of the system for TCSPC imaging and locating objects obscured in scattering media - specifically to locate a series of discrete point sources of light along an optical fibre submerged in a highly scattering solution. We demonstrate that by selectively imaging using early arriving photons which have undergone less scattering than later arriving photons, our TCSPC imaging system is able to locate the position of discrete point sources of light than a non-time-resolved imaging system.
△ Less
Submitted 30 June, 2022; v1 submitted 15 April, 2022;
originally announced April 2022.
-
Fast full patient and radioisotope Monte Carlo simulations of targeted radionuclide therapy: introducing egs_mird
Authors:
Martin P. Martinov,
Chidera Opera,
Rowan M. Thomson,
Ting-Yim Lee
Abstract:
BACKGROUND: Targeted Radionuclide Therapy (TRT) is a fast-growing field garnering much interest, however, dosimetry calculation techniques remain relatively simple. PURPOSE: To introduce egs_mird, a new Monte Carlo application built in EGSnrc which allows users to model full patient tissue and density (using clinical CT images) and radionuclide distribution (using clinical PET images) for fast and…
▽ More
BACKGROUND: Targeted Radionuclide Therapy (TRT) is a fast-growing field garnering much interest, however, dosimetry calculation techniques remain relatively simple. PURPOSE: To introduce egs_mird, a new Monte Carlo application built in EGSnrc which allows users to model full patient tissue and density (using clinical CT images) and radionuclide distribution (using clinical PET images) for fast and detailed TRT dose calculation. METHODS: The novel application egs_mird is introduced, including its structure and variation reduction approaches. A new egs++ source class egs_internal_source and a modified version of egs_radionuclide_source are described. The new code is compared to other MC calculations of S-value kernels, along with self-validation using the electron Fano test. Full patient prostate 177Lu TRT cancer treatment simulations are performed using a single set of patient DICOM CT and [18F]-DCFPyL PET data. RESULTS: Good agreement is found between S-value kernels calculated using egs_mird and those found in the literature. The Fano test is satisfied to 0.1%. Patient prostate, rectum, bone marrow, and bladder dose volume histogram results did not vary significantly when using the track-length estimator and not modelling electron transport, modelling bone marrow explicitly (rather than using generic tissue compositions), and reducing activity to voxels containing partial or full calcifications to half or none, respectively. Simulations using the track-length estimator can be completed in under 15 minutes. CONCLUSION: This work shows egs mird to be a reliable MC code for computing TRT doses as realistically as the patient CT and PET data allow, supporting the use of egs mird for dose calculations in TRT.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Hubble Asteroid Hunter: I. Identifying asteroid trails in Hubble Space Telescope images
Authors:
Sandor Kruk,
Pablo García Martín,
Marcel Popescu,
Bruno Merín,
Max Mahlke,
Benoît Carry,
Ross Thomson,
Samet Karadag,
Javier Durán,
Elena Racero,
Fabrizio Giordano,
Deborah Baines,
Guido de Marchi,
René Laureijs
Abstract:
Large and publicly available astronomical archives open up new possibilities to search and study Solar System objects. However, advanced techniques are required to deal with the large amounts of data. These unbiased surveys can be used to constrain the size distribution of minor bodies, which represents a piece of the puzzle for the formation models of the Solar System. We aim to identify asteroid…
▽ More
Large and publicly available astronomical archives open up new possibilities to search and study Solar System objects. However, advanced techniques are required to deal with the large amounts of data. These unbiased surveys can be used to constrain the size distribution of minor bodies, which represents a piece of the puzzle for the formation models of the Solar System. We aim to identify asteroids in archival images from the ESA Hubble Space Telescope (HST) Science data archive using data mining. We developed a citizen science project on the Zooniverse platform, Hubble Asteroid Hunter (www.asteroidhunter.org) asking members of the public to identify asteroid trails in archival HST images. We used the labels provided by the volunteers to train an automated deep learning model built with Google Cloud AutoML Vision to explore the entire HST archive to detect asteroids crossing the field-of-view. We report the detection of 1701 new asteroid trails identified in archival HST data via our citizen science project and the subsequent machine learning exploration of the ESA HST science data archive. We detect asteroids to a magnitude of 24.5, which are statistically fainter than the populations of asteroids identified from ground-based surveys. The majority of asteroids are distributed near the ecliptic plane, as expected, where we find an approximate density of 80 asteroids per square degree. We match 670 trails (39% of the trails found) with 454 known Solar System objects in the Minor Planet Center database, however, no matches are found for 1031 (61%) trails. The unidentified asteroids are faint, being on average 1.6 magnitudes fainter than the asteroids we succeeded to identify. They probably correspond to previously unknown objects. This work demonstrates that citizen science and machine learning are useful techniques for the systematic search of SSOs in existing astronomy science archives.
△ Less
Submitted 4 May, 2022; v1 submitted 1 February, 2022;
originally announced February 2022.
-
Technical Note: MC-GPU breast dosimetry validations with other Monte Carlo codes and Phase Space File implementation
Authors:
Rodrigo T. Massera,
Rowan M. Thomson,
Alessandra Tomal
Abstract:
Purpose: To validate the MC-GPU Monte Carlo code for dosimetric studies in x-ray breast imaging modalities: mammography, digital breast tomosynthesis, contrast enhanced digital mammography and breast-CT. Moreover, to implement and validate a phase space file generation routine. Methods: The MC-GPU code (v. 1.5 DBT) was modified in order to generate phase space files and to be compatible with PENEL…
▽ More
Purpose: To validate the MC-GPU Monte Carlo code for dosimetric studies in x-ray breast imaging modalities: mammography, digital breast tomosynthesis, contrast enhanced digital mammography and breast-CT. Moreover, to implement and validate a phase space file generation routine. Methods: The MC-GPU code (v. 1.5 DBT) was modified in order to generate phase space files and to be compatible with PENELOPE v. 2018 derived cross section database. Simulations were performed with homogeneous and anthropomorphic breast phantoms for different breast imaging techniques. The glandular dose was computed for each case and compared with results from the PENELOPE (v. 2014) + penEasy (v. 2015) and egs brachy (EGSnrc) Monte Carlo codes. Afterwards, several phase space files were generated with MC-GPU and the scored photon spectra were compared between the codes. Results: MC-GPU showed good agreement with the other codes when calculating the glandular dose distribution for mammography, mean glandular dose for digital breast tomosynthesis, and normalized glandular dose for breast-CT. The latter case showed average/maximum relative differences of 2.3%/27%, respectively, compared to other literature works, with the larger differences observed at low energies (around 10 keV). The recorded photon spectra entering a voxel were similar (within statistical uncertainties) between the three Monte Carlo codes. Conclusions: The results indicate that MC-GPU code is suitable for breast dosimetric studies for different x-ray breast imaging modalities, with the advantage of a high performance. The phase space file implementation was validated and is compatible with the IAEA standard, allowing multiscale Monte Carlo simulations with a combination of CPU and GPU codes.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Simulations of Quantum Circuits with Approximate Noise using qsim and Cirq
Authors:
Sergei V. Isakov,
Dvir Kafri,
Orion Martin,
Catherine Vollgraff Heidweiller,
Wojciech Mruczkiewicz,
Matthew P. Harrigan,
Nicholas C. Rubin,
Ross Thomson,
Michael Broughton,
Kevin Kissell,
Evan Peters,
Erik Gustafson,
Andy C. Y. Li,
Henry Lamm,
Gabriel Perdue,
Alan K. Ho,
Doug Strain,
Sergio Boixo
Abstract:
We introduce multinode quantum trajectory simulations with qsim, an open source high performance simulator of quantum circuits. qsim can be used as a backend of Cirq, a Python software library for writing quantum circuits. We present a novel delayed inner product algorithm for quantum trajectories which can result in an order of magnitude speedup for low noise simulation. We also provide tools to…
▽ More
We introduce multinode quantum trajectory simulations with qsim, an open source high performance simulator of quantum circuits. qsim can be used as a backend of Cirq, a Python software library for writing quantum circuits. We present a novel delayed inner product algorithm for quantum trajectories which can result in an order of magnitude speedup for low noise simulation. We also provide tools to use this framework in Google Cloud Platform, with high performance virtual machines in a single mode or multinode setting. Multinode configurations are well suited to simulate noisy quantum circuits with quantum trajectories. Finally, we introduce an approximate noise model for Google's experimental quantum computing platform and compare the results of noisy simulations with experiments for several quantum algorithms on Google's Quantum Computing Service.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Large scale multi-node simulations of $\mathbb{Z}_2$ gauge theory quantum circuits using Google Cloud Platform
Authors:
Erik Gustafson,
Burt Holzman,
James Kowalkowski,
Henry Lamm,
Andy C. Y. Li,
Gabriel Perdue,
Sergio Boixo,
Sergei Isakov,
Orion Martin,
Ross Thomson,
Catherine Vollgraff Heidweiller,
Jackson Beall,
Martin Ganahl,
Guifre Vidal,
Evan Peters
Abstract:
Simulating quantum field theories on a quantum computer is one of the most exciting fundamental physics applications of quantum information science. Dynamical time evolution of quantum fields is a challenge that is beyond the capabilities of classical computing, but it can teach us important lessons about the fundamental fabric of space and time. Whether we may answer scientific questions of inter…
▽ More
Simulating quantum field theories on a quantum computer is one of the most exciting fundamental physics applications of quantum information science. Dynamical time evolution of quantum fields is a challenge that is beyond the capabilities of classical computing, but it can teach us important lessons about the fundamental fabric of space and time. Whether we may answer scientific questions of interest using near-term quantum computing hardware is an open question that requires a detailed simulation study of quantum noise. Here we present a large scale simulation study powered by a multi-node implementation of qsim using the Google Cloud Platform. We additionally employ newly-developed GPU capabilities in qsim and show how Tensor Processing Units -- Application-specific Integrated Circuits (ASICs) specialized for Machine Learning -- may be used to dramatically speed up the simulation of large quantum circuits. We demonstrate the use of high performance cloud computing for simulating $\mathbb{Z}_2$ quantum field theories on system sizes up to 36 qubits. We find this lattice size is not able to simulate our problem and observable combination with sufficient accuracy, implying more challenging observables of interest for this theory are likely beyond the reach of classical computation using exact circuit simulation.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
High spatial resolution dosimetry with uncertainty analysis using Raman micro-spectroscopy readout of radiochromic films
Authors:
Connor Mcnairn,
Iymad Mansour,
Bryan Muir,
Rowan M. Thomson,
Sangeeta Murugkar
Abstract:
Purpose: The purpose of this work is to develop a new approach for high spatial resolution dosimetry based on Raman micro-spectroscopy scanning of radiochromic film (RCF). We generate dose calibration curves over an extended dose range from 0-50 Gy and with improved sensitivity to low (<2 Gy) doses, in addition to evaluating uncertainties. Methods: Samples of RCF (EBT3) were irradiated at a broad…
▽ More
Purpose: The purpose of this work is to develop a new approach for high spatial resolution dosimetry based on Raman micro-spectroscopy scanning of radiochromic film (RCF). We generate dose calibration curves over an extended dose range from 0-50 Gy and with improved sensitivity to low (<2 Gy) doses, in addition to evaluating uncertainties. Methods: Samples of RCF (EBT3) were irradiated at a broad dose-range of 0.03 Gy-50 Gy. Raman spectra were acquired with a custom-built Raman micro-spectroscopy setup involving a 500 mW, multimode 785 nm laser. The depth of focus of 34 um enabled the concurrent collection of Raman spectra from the RCF active layer and the polyester laminate. The pre-processed Raman spectra were normalized to the intensity of the 1614 cm-1 Raman peak from the polyester laminate that was unaltered by radiation. The experimental, fitting and total dose uncertainty was determined across the entire dose range for the dosimetry system of Raman micro-spectroscopy and RCF. Results: High resolution in the dose response of the RCF, even down to 0.03 Gy, was obtained in this study. The dynamic range of the calibration curves based on all three Raman peaks in the RCF extended up to 50 Gy with no saturation. At a spatial resolution of 30X30 um^2, the total uncertainty in estimating dose in the 0.5 Gy to 50 Gy dose range was [6 - 9]% for all three Raman calibration curves. This consisted of the experimental uncertainty of [5 - 8]%, and the fitting uncertainty of [2.5 - 4.5]%. Conclusions: The high spatial resolution experimental dosimetry technique based on Raman micro-spectroscopy and RCF presented here, could become useful for applications in, as well as for applications based on small field dosimetry.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
A study of Type B uncertainties associated with the photoelectric effect in low-energy Monte Carlo simulations
Authors:
Christian Valdes-Cortez,
Iymad Mansour,
Mark J. Rivard,
Facundo Ballester,
Ernesto Mainegra-Hing,
Rowan M. Thomson,
Javier Vijande
Abstract:
The goal of this manuscript is to estimate Type B uncertainties in absorbed-dose calculations arising from the different implementations in current state-of-the-art Monte Carlo codes of low-energy photon cross-sections (<200 keV). Monte Carlo simulations are carried out using three codes widely used in the low-energy domain: PENELOPE-2018, EGSnrc, and MCNP. Mass energy-absorption coefficients for…
▽ More
The goal of this manuscript is to estimate Type B uncertainties in absorbed-dose calculations arising from the different implementations in current state-of-the-art Monte Carlo codes of low-energy photon cross-sections (<200 keV). Monte Carlo simulations are carried out using three codes widely used in the low-energy domain: PENELOPE-2018, EGSnrc, and MCNP. Mass energy-absorption coefficients for water, air, graphite, and their respective ratios; absorbed dose; and photon-fluence spectra are considered. Benchmark simulations using similar cross-sections have been performed. The differences observed between these quantities when different cross-sections are considered are taken to be a good estimator for the corresponding Type B uncertainties. A conservative Type B uncertainty for the absorbed dose (k=2) of 1.2%-1.7% (<50 keV), 0.6%-1.2% (50-100 keV), and 0.3% (100-200 keV) is estimated. The photon-fluence spectrum does not present clinically relevant differences that merit considering additional Type B uncertainties except for energies below 25 keV, where a Type B uncertainty of 0.5% is obtained. Below 30 keV, mass energy-absorption coefficients show Type B uncertainties (k=2) of about 1.5% (water and air), and 2% (graphite), reaching values about 1% (40-50 keV) and 0.5% (50-75 keV). Type B uncertainties for the water-to-graphite ratios are observed for energies below 30 keV, about 0.7% (k=2). In contrast with the intermediate (about 500 keV) or high (about 1 MeV) energy domains, Type B uncertainties due to the different cross-sections implementation cannot be considered subdominant with respect to Type A uncertainties or even to other sources of Type B uncertainties. Therefore, the values reported here should be accommodated within the uncertainty budget in low-energy photon dosimetry studies.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Update of the CLRP eye plaque brachytherapy database for photon-emitting sources
Authors:
Habib Safigholi,
Zack Parsons,
Stephen G. Deering,
Rowan M. Thomson
Abstract:
Purpose: To update and extend the Carleton Laboratory for Radiotherapy Physics (CLRP) Eye Plaque (EP) dosimetry database for low-energy photon-emitting brachytherapy sources using egs_brachy, an open-source EGSnrc application. The previous database, CLRP_EPv1, contained datasets for the Collaborative Ocular Melanoma Study (COMS) plaques (2008). The new database, CLRP EPv2, consists of newly-calcul…
▽ More
Purpose: To update and extend the Carleton Laboratory for Radiotherapy Physics (CLRP) Eye Plaque (EP) dosimetry database for low-energy photon-emitting brachytherapy sources using egs_brachy, an open-source EGSnrc application. The previous database, CLRP_EPv1, contained datasets for the Collaborative Ocular Melanoma Study (COMS) plaques (2008). The new database, CLRP EPv2, consists of newly-calculated 3D dose distributions for 17 plaques [8 COMS, 5 Eckert & Ziegler BEBIG, and 4 other representative models] for Pd-103, I-125, and Cs-131 seeds.
Methods: Plaque models are developed with egs_brachy, based on published/manufacturer dimensions and material data. The BEBIG plaques are identical in dimensions to COMS plaques but differ in elemental composition and/or density. Eye plaques and seeds are simulated at the centre of full-scatter water phantoms, scoring in (0.05 cm)^3 voxels spanning the eye for scenarios: (i) HOMO: simulated TG43 conditions; (ii) HETERO: eye plaques and seeds fully modelled; (iii) HETsi (BEBIG only): one seed is active at a time with other seed geometries present but not emitting photons (inactive). For validation, doses are compared to those from CLRP_EPv1 and published data.
Data Format and Access: Data are available at https://physics.carleton.ca/ clrp/eye_plaque_v2, http://doi.org/10.22215/clrp/EPv2. The data consist of 3D dose distributions (text-based EGSnrc 3ddose file) and graphical presentations of the comparisons to previously published data.
Potential Applications: The CLRP EPv2 database provides accurate reference 3D dose distributions to advance ocular brachytherapy dose evaluations. The fully-benchmarked eye plaque models will be freely-distributed with egs brachy, supporting adoption of model-based dose evaluations as recommended by TG-129, TG-186, and TG-221.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Dosimetric investigation of 103Pd permanent breast seed implant brachytherapy based on Monte Carlo calculations
Authors:
Stephen G. Deering,
Michelle Hilts,
Deidre Batchelar,
Juanita Crook,
Rowan M. Thomson
Abstract:
PURPOSE: Permanent breast seed implant (PBSI) using 103Pd is emerging as an effective adjuvant radiation technique for early-stage breast cancer. However, clinical dose evaluations follow the water-based TG-43 approach with its considerable approximations. Towards clinical adoption of advanced TG-186 model-based dose evaluations, this study presents a comprehensive investigation for PBSI consideri…
▽ More
PURPOSE: Permanent breast seed implant (PBSI) using 103Pd is emerging as an effective adjuvant radiation technique for early-stage breast cancer. However, clinical dose evaluations follow the water-based TG-43 approach with its considerable approximations. Towards clinical adoption of advanced TG-186 model-based dose evaluations, this study presents a comprehensive investigation for PBSI considering both target and normal tissue doses. METHODS: Dose calculations are performed with the free open-source Monte Carlo (MC) code, egs_brachy, using 2 types of virtual patient models: TG43sim (simulated TG-43 conditions: all water with no interseed attenuation) and MCref (heterogeneous tissue modelling from patient CT, interseed attenuation, seeds at implant angle) for 35 patients. Sensitivity of dose metrics to seed orientation and the threshold for glandular/adipose tissue segmentation are assessed. RESULTS: In the target volume, D90 is 14.1% lower with MCref than with TG43sim, on average. Conversely, normal tissue doses are generally higher with MCref than with TG43sim, e.g., by 22% for skin D1cm2, 82% for ribs Dmax, and 71% for heart D1cm3. Discrepancies between MCref and TG43sim doses vary over the patient cohort, as well as with the tissue and metric considered. Doses are sensitive to the glandular/adipose tissue segmentation threshold with differences of a few percent in target D90. Skin doses are sensitive to seed orientation. CONCLUSIONS: TG-43 dose evaluations generally underestimate doses to critical normal organs/tissues while overestimating target doses. There is considerable variation in MCref and TG43sim on a patient-by-patient basis, suggesting that clinical adoption of patient-specific MC dose calculations is motivated. The MCref framework presented herein provides a consistent modelling approach for clinical implementation of advanced TG-186 dose calculations.
△ Less
Submitted 29 December, 2020;
originally announced December 2020.
-
Sub millimetre flexible fibre probe for background and fluorescence free Raman spectroscopy
Authors:
Stephanos Yerolatsitis,
András Kufcsák,
Katjana Ehrlich,
Harry A. C. Wood,
Susan Fernandes,
Tom Quinn,
Vikki Young,
Irene Young,
Katie Hamilton,
Ahsan R. Akram,
Robert R. Thomson,
Keith Finlayson,
Kevin Dhaliwal,
James M. Stone
Abstract:
Using the shifted-excitation Raman difference spectroscopy technique and an optical fibre featuring a negative curvature excitation core and a coaxial ring of high numerical aperture collection cores, we have developed a portable, background and fluorescence free, endoscopic Raman probe. The probe consists of a single fibre with a diameter of less than 0.25 mm packaged in a sub-millimetre tubing,…
▽ More
Using the shifted-excitation Raman difference spectroscopy technique and an optical fibre featuring a negative curvature excitation core and a coaxial ring of high numerical aperture collection cores, we have developed a portable, background and fluorescence free, endoscopic Raman probe. The probe consists of a single fibre with a diameter of less than 0.25 mm packaged in a sub-millimetre tubing, making it compatible with standard bronchoscopes. The Raman excitation light in the fibre is guided in air and therefore interacts little with silica, enabling an almost background free transmission of the excitation light. In addition, we used the shifted-excitation Raman difference spectroscopy technique and a tunable 785 nm laser to separate the fluorescence and the Raman spectrum from highly fluorescent samples, demonstrating the suitability of the probe for biomedical applications. Using this probe we also acquired fluorescence free human lung tissue data.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit
Authors:
Sebastiaan Y. Haffert,
Robert J. Harris,
Alessio Zanutta,
Fraser A. Pike,
Andrea Bianco,
Eduardo Redaelli,
Aurélien Benoît,
David G. MacLachlan,
Calum A. Ross,
Itandehui Gris-Sánchez,
Mareike D. Trappen,
Yilin Xu,
Matthias Blaicher,
Pascal Maier,
Giulio Riva,
Baptiste Sinquin,
Caroline Kulcsár,
Nazim Ali Bharmal,
Eric Gendron,
Lazar Staykov,
Tim J. Morris,
Santiago Barboza,
Norbert Muench,
Lisa Bardou,
Léonard Prengère
, et al. (9 additional authors not shown)
Abstract:
Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact…
▽ More
Direct imaging instruments have the spatial resolution to resolve exoplanets from their host star. This enables direct characterization of the exoplanets atmosphere, but most direct imaging instruments do not have spectrographs with high enough resolving power for detailed atmospheric characterization. We investigate the use of a single-mode diffraction-limited integral-field unit that is compact and easy to integrate into current and future direct imaging instruments for exoplanet characterization. This achieved by making use of recent progress in photonic manufacturing to create a single-mode fiber-fed image reformatter. The fiber-link is created with 3D printed lenses on top of a single-mode multi-core fiber that feeds an ultrafast laser inscribed photonic chip that reformats the fiber into a pseudo-slit. We then couple it to a first-order spectrograph with a triple stacked volume phase holographic grating for a high efficiency over a large bandwidth. The prototype system has had a successful first-light observing run at the 4.2 meter William Herschel Telescope. The measured on-sky resolving power is between 2500 and 3000, depending on the wavelength. With our observations we show that single-mode integral-field spectroscopy is a viable option for current and future exoplanet imaging instruments.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Heterogeneous multiscale Monte Carlo simulations for gold nanoparticle radiosensitization
Authors:
Martin P. Martinov,
Rowan M. Thomson
Abstract:
To introduce the heterogeneous multiscale (HetMS) model for Monte Carlo simulations of gold nanoparticle dose-enhanced radiation therapy (GNPT), a model characterized by its varying levels of detail on different length scales within a single phantom; to apply the HetMS model in two different scenarios relevant for GNPT and to compare computed results with others published. The HetMS model is imple…
▽ More
To introduce the heterogeneous multiscale (HetMS) model for Monte Carlo simulations of gold nanoparticle dose-enhanced radiation therapy (GNPT), a model characterized by its varying levels of detail on different length scales within a single phantom; to apply the HetMS model in two different scenarios relevant for GNPT and to compare computed results with others published. The HetMS model is implemented in EGSnrc; the code is tested via comparisons with published data from independent gold nanoparticle (GNP) simulations. Two distinct scenarios for the HetMS model are considered: (1) monoenergetic photon beams incident on a large cylinder; (2) isotropic point source at the center of a large sphere with GNPs diffusing from the center. Dose enhancement factors (DEFs) are compared for different source energies, depths, gold concentrations, GNP sizes, and modeling assumptions. Simulation efficiencies are investigated. The HetMS MC simulations account for the competing effects of photon fluence perturbation coupled with enhanced local energy deposition. DEFs are most sensitive to these effects for lower source energies, varying with distance from the source; DEFs below unity can occur at energies relevant for brachytherapy. Compared to discrete modeling of GNPs throughout the gold-containing volume, efficiencies are enhanced by up to a factor of 122 with the HetMS approach. For the spherical phantom, DEFs vary with time for diffusion, radionuclide, and radius. By combining geometric models of varying complexity on different length scales within a single simulation, the HetMS model can effectively account for both macroscopic and microscopic effects. Efficiency gains with the HetMS approach enable diverse calculations which would otherwise be prohibitively long. The HetMS model may be extended to diverse scenarios relevant for GNPT, providing further avenues for research and development.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Update of the CLRP TG-43 parameter database for low-energy brachytherapy sources
Authors:
Habib Safigholi,
Marc J. P. Chamberland,
Randle E. P. Taylor,
Christian H. Allen,
Martin P. Martinov,
D. W. O. Rogers,
Rowan M. Thomson
Abstract:
PURPOSE: To update the Carleton Laboratory for Radiotherapy Physics (CLRP) TG-43 dosimetry database for low-energy (< 50 keV) photon-emitting low-dose rate (LDR) brachytherapy sources utilizing the open-source EGSnrc application egs_brachy rather than the BrachyDose application used previously for 27 LDR sources in the 2008 CLRP version (CLRPv1). CLRPv2 covers 40 sources (Pd-103, I-125, Cs-131). A…
▽ More
PURPOSE: To update the Carleton Laboratory for Radiotherapy Physics (CLRP) TG-43 dosimetry database for low-energy (< 50 keV) photon-emitting low-dose rate (LDR) brachytherapy sources utilizing the open-source EGSnrc application egs_brachy rather than the BrachyDose application used previously for 27 LDR sources in the 2008 CLRP version (CLRPv1). CLRPv2 covers 40 sources (Pd-103, I-125, Cs-131). A comprehensive set of TG-43 parameters is calculated, including dose-rate constants, radial dose functions with functional fitting parameters, 1D and 2D anisotropy functions, along-away dose-rate tables, Primary-Scatter separation dose tables (for some sources), and mean photon energies. The database also documents the source models which will become part of the egs_brachy distribution. METHODS: Datasets are calculated after a systematic recoding of the source geometries using the egs++ geometry package and its egs_brachy extensions. Full scatter water phantoms with varying voxel resolutions in cylindrical coordinates are used for dose calculations. New statistical uncertainties of source volume corrections for phantom voxels which overlap with brachytherapy sources are implemented in egs_brachy, and all CLRPv2 data include these uncertainties. For validation, data are compared to CLRPv1 and other data in the literature. DATA ACCESS/FORMAT: Data are available at https://physics.carleton.ca/ clrp/egs_brachy/seed_database_v2. As well as being presented graphically in comparisons to previous calculations, data are available in Excel (.xlsx) spreadsheets for each source. APPLICATIONS: The database has applications in research, dosimetry, and brachytherapy planning. This comprehensive update provides the medical physics community with more accurate TG-43 dose evaluation parameters, as well as fully-benchmarked source models distributed with egs_brachy.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Focal-ratio-degradation (FRD) mitigation in a multimode fiber link using mode-selective photonic lanterns
Authors:
Aurélien Benoît,
Stephanos Yerolatsitis,
Kerrianne Harrington,
Tim A. Birks,
Robert R. Thomson
Abstract:
We present a new way to mitigate focal-ratio degradation (FRD) when using optical fibers to transport multimode light. Our approach exploits a custom multicore fiber (MCF) with six dissimilar cores that are single mode at ~1550 nm wavelength and minimally coupled over 7 m. We fabricated adiabatic mode-selective photonic lanterns (PLs) at each end of the MCF to create a fiber link with multimode po…
▽ More
We present a new way to mitigate focal-ratio degradation (FRD) when using optical fibers to transport multimode light. Our approach exploits a custom multicore fiber (MCF) with six dissimilar cores that are single mode at ~1550 nm wavelength and minimally coupled over 7 m. We fabricated adiabatic mode-selective photonic lanterns (PLs) at each end of the MCF to create a fiber link with multimode ports, the PLs coupling each spatial mode of the multimode ports to a specific core of the MCF and vice versa. The PL-MCF-PL link exhibits superior FRD behavior compared to a conventional multimode fiber that also supports 6 modes, because it inhibits the transfer of light from lower-order modes to higher-order modes. These results open up a potentially powerful new approach to mitigate FRD in multimode fiber links, with particular applications in astronomical instruments.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
Taking EGSnrc to new lows: Development of egs++ lattice geometry and testing with microscopic
Authors:
Martin P. Martinov,
Rowan M. Thomson
Abstract:
Purpose: This work introduces a new lattice geometry library, egs_lattice, into the EGSnrc Monte Carlo code, which can be used for both modeling very large (previously unfeasible) quantities of geometries and establishing recursive boundary conditions. The reliability of egs_lattice, as well as EGSnrc in general, is cross-validated and tested. Methods: New Bravais, cubic, and hexagonal lattice geo…
▽ More
Purpose: This work introduces a new lattice geometry library, egs_lattice, into the EGSnrc Monte Carlo code, which can be used for both modeling very large (previously unfeasible) quantities of geometries and establishing recursive boundary conditions. The reliability of egs_lattice, as well as EGSnrc in general, is cross-validated and tested. Methods: New Bravais, cubic, and hexagonal lattice geometries are defined in egs_lattice and their transport algorithms are described. Simulations of cells and Gold NanoParticle (GNP) containing cavities are implemented to compare to published Geant4-DNA and PENELOPE results. Recursive boundary conditions, implemented through a cubic lattice, are used to perform electron Fano cavity tests. Results: Lattices are successfully implemented in EGSnrc. EGSnrc calculated doses to cell cytoplasm and nucleus when irradiated by an internal electron source with a median difference of 0.6% compared to Geant4-DNA. EGSnrc calculated the ratio of dose to a microscopic cavity containing GNPs over dose to a cavity containing a homogeneous mixture of gold, and results generally agree (within 1%) with PENELOPE. The Fano test is passed (sub-0.1%) for all energies/ cells considered. Additionally, the recursive boundary conditions used for the Fano test provided a factor of over a million increase in efficiency in some cases. Conclusions: The egs_lattice geometry library, currently available as a pull request on the EGSnrc GitHub develop branch, is now freely accessible as open-source code. Lattice geometry implementations cross-validated with independent simulations in other MC codes and verified with the electron Fano cavity test demonstrate not only the reliability of egs_lattice, but, by extension, EGSnrc's ability to simulate transport in nanometer geometries and score in microscopic cavities.
△ Less
Submitted 10 March, 2020;
originally announced March 2020.
-
Modal noise mitigation for high-precision spectroscopy using a photonic reformatter
Authors:
Fraser A. Pike,
Aurélien Benoît,
David G. MacLachlan,
Robert J. Harris,
Itandehui Gris Sánchez,
David Lee,
Tim A. Birks,
Robert R. Thomson
Abstract:
Recently, we demonstrated how an astrophotonic light reformatting device, based on a multicore fibre photonic lantern and a three-dimensional waveguide component, can be used to efficiently reformat the point spread function of a telescope to a diffraction-limited psuedo-slit [arXiv:1512.07309]. Here, we demonstrate how such a device can also efficiently mitigate modal noise -- a potential source…
▽ More
Recently, we demonstrated how an astrophotonic light reformatting device, based on a multicore fibre photonic lantern and a three-dimensional waveguide component, can be used to efficiently reformat the point spread function of a telescope to a diffraction-limited psuedo-slit [arXiv:1512.07309]. Here, we demonstrate how such a device can also efficiently mitigate modal noise -- a potential source of instability in high resolution multi-mode fibre-fed spectrographs). To investigate the modal noise performance of the photonic reformatter, we have used it to feed light into a bench-top near-infrared spectrograph (R {\approx} 9,500, λ {\approx} 1550 nm). One approach to quantifying the modal noise involved the use of broadband excitation light and a statistical analysis of how the overall measured spectrum was affected by variations in the input coupling conditions. This approach indicated that the photonic reformatter could reduce modal noise by a factor of six when compared to a multi-mode fibre with a similar number of guided modes. Another approach to quantifying the modal noise involved the use of multiple spectrally narrow lines, and an analysis of how the measured barycentres of these lines were affected by variations in the input coupling. Using this approach, the photonic reformatter was observed to suppress modal noise to the level necessary to obtain spectra with stability close to that observed when using a single mode fibre feed. These results demonstrate the potential of using photonic reformatters to enable efficient multi-mode spectrographs that operate at the diffraction limit and are free of modal noise, with potential applications including radial velocity measurements of M-dwarfs.
△ Less
Submitted 24 January, 2020;
originally announced January 2020.
-
Synthetic mean-field interactions in photonic lattices
Authors:
Callum W. Duncan,
Michael J. Hartmann,
Robert R. Thomson,
Patrik Öhberg
Abstract:
Photonic lattices are usually considered to be limited by their lack of methods to include interactions. We address this issue by introducing mean-field interactions through optical components which are external to the photonic lattice. The proposed technique to realise mean-field interacting photonic lattices relies on a Suzuki-Trotter decomposition of the unitary evolution for the full Hamiltoni…
▽ More
Photonic lattices are usually considered to be limited by their lack of methods to include interactions. We address this issue by introducing mean-field interactions through optical components which are external to the photonic lattice. The proposed technique to realise mean-field interacting photonic lattices relies on a Suzuki-Trotter decomposition of the unitary evolution for the full Hamiltonian. The technique realises the dynamics in an analogous way to that of a step-wise numerical implementation of quantum dynamics, in the spirit of digital quantum simulation. It is a very versatile technique which allows for the emulation of interactions that do not only depend on inter-particle separations or do not decay with particle separation. We detail the proposed experimental scheme and consider two examples of interacting phenomena, self-trap** and the decay of Bloch oscillations, that are observable with the proposed technique.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
The demise of the filesystem and multi level service architecture
Authors:
William O'Mullane,
Niall Gaffney,
Frossie Economou,
Arfon M. Smith,
J. Ross Thomson,
Tim Jenness
Abstract:
Many astronomy data centres still work on filesystems. Industry has moved on; current practice in computing infrastructure is to achieve Big Data scalability using object stores rather than POSIX file systems. This presents us with opportunities for portability and reuse of software underlying processing and archive systems but it also causes problems for legacy implementations in current data cen…
▽ More
Many astronomy data centres still work on filesystems. Industry has moved on; current practice in computing infrastructure is to achieve Big Data scalability using object stores rather than POSIX file systems. This presents us with opportunities for portability and reuse of software underlying processing and archive systems but it also causes problems for legacy implementations in current data centers.
△ Less
Submitted 31 July, 2019; v1 submitted 26 July, 2019;
originally announced July 2019.
-
Hepatic vessel segmentation using a reduced filter 3D U-Net in ultrasound imaging
Authors:
Bart R. Thomson,
Jasper Nijkamp,
Oleksandra Ivashchenko,
Ferdinand van der Heijden,
Jasper N. Smit,
Niels F. M. Kok,
Koert F. D. Kuhlmann,
Theo J. M. Ruers,
Matteo Fusaglia
Abstract:
Accurate hepatic vessel segmentation on ultrasound (US) images can be an important tool in the planning and execution of surgery, however proves to be a challenging task due to noise and speckle. Our method comprises a reduced filter 3D U-Net implementation to automatically detect hepatic vasculature in 3D US volumes. A comparison is made between volumes acquired with a 3D probe and stacked 2D US…
▽ More
Accurate hepatic vessel segmentation on ultrasound (US) images can be an important tool in the planning and execution of surgery, however proves to be a challenging task due to noise and speckle. Our method comprises a reduced filter 3D U-Net implementation to automatically detect hepatic vasculature in 3D US volumes. A comparison is made between volumes acquired with a 3D probe and stacked 2D US images based on electromagnetic tracking. Experiments are conducted on 67 scans, where 45 are used in training, 12 in validation and 10 in testing. This network architecture yields Dice scores of 0.740 and 0.781 for 3D and stacked 2D volumes respectively, comparing promising to literature and inter-observer performance (Dice = 0.879).
△ Less
Submitted 28 July, 2019;
originally announced July 2019.
-
Astro2020 APC White Paper: Astronomy should be in the clouds
Authors:
Arfon M. Smith,
Rob Pike,
William O'Mullane,
Frossie Economou,
Adam Bolton,
Ivelina Momcheva,
Amanda E Bauer,
Bruce Becker,
Eric Bellm,
Andrew Connolly,
Steven M. Crawford,
Nimish Hathi,
Peter Melchior,
Joshua Peek,
Arif Solmaz,
Ross Thomson,
Erik TollerudI,
David W. Liska
Abstract:
Commodity cloud computing, as provided by commercial vendors such as Amazon, Google, and Microsoft, has revolutionized computing in many sectors. With the advent of a new class of big data, public access astronomical facility such as LSST, DKIST, and WFIRST, there exists a real opportunity to combine these missions with cloud computing platforms and fundamentally change the way astronomical data i…
▽ More
Commodity cloud computing, as provided by commercial vendors such as Amazon, Google, and Microsoft, has revolutionized computing in many sectors. With the advent of a new class of big data, public access astronomical facility such as LSST, DKIST, and WFIRST, there exists a real opportunity to combine these missions with cloud computing platforms and fundamentally change the way astronomical data is collected, processed, archived, and curated. Making these changes in a cross-mission, coordinated way can provide unprecedented economies of scale in personnel, data collection and management, archiving, algorithm and software development and, most importantly, science.
△ Less
Submitted 14 July, 2019;
originally announced July 2019.
-
Compressive optical imaging with a photonic lantern
Authors:
Debaditya Choudhury,
Duncan K. McNicholl,
Audrey RepettI,
Itandehui Gris-Sánchez,
Tim A. Birks,
Yves Wiaux,
Robert R. Thomson
Abstract:
The thin and flexible nature of optical fibres often makes them the ideal technology to view biological processes in-vivo, but current microendoscopic approaches are limited in spatial resolution. Here, we demonstrate a new route to high resolution microendoscopy using a multicore fibre (MCF) with an adiabatic multimode-to-singlemode photonic lantern transition formed at the distal end by tapering…
▽ More
The thin and flexible nature of optical fibres often makes them the ideal technology to view biological processes in-vivo, but current microendoscopic approaches are limited in spatial resolution. Here, we demonstrate a new route to high resolution microendoscopy using a multicore fibre (MCF) with an adiabatic multimode-to-singlemode photonic lantern transition formed at the distal end by tapering. We show that distinct multimode patterns of light can be projected from the output of the lantern by individually exciting the single-mode MCF cores, and that these patterns are highly stable to fibre movement. This capability is then exploited to demonstrate a form of single-pixel imaging, where a single pixel detector is used to detect the fraction of light transmitted through the object for each multimode pattern. A custom compressive imaging algorithm we call SARA-COIL is used to reconstruct the object using only the pre-measured multimode patterns themselves and the detector signals.
△ Less
Submitted 1 March, 2019;
originally announced March 2019.
-
High-speed dual color fluorescence lifetime endomicroscopy for highly-multiplexed pulmonary diagnostic applications and detection of labeled bacteria
Authors:
Ettore Pedretti,
Michael G. Tanner,
Tushar R. Choudhary,
Nikola Krstajic,
Alicia Megia--Fernandez,
Robert K. Henderson,
Mark Bradley,
Robert R. Thomson,
John M. Girkin,
Kev Dhaliwal,
Paul A. Dalgarno
Abstract:
We present a dual color laser scanning endomicroscope capable of fluorescence lifetime endomicroscopy at one frame per second (FPS). The scanning system uses a coherent imaging fiber with 30,000 cores. High-speed lifetime imaging is achieved by distributing the signal over an array of 1024 parallel single-photon avalanche photo--diode detectors (SPADs), minimizing detection dead time maximizing th…
▽ More
We present a dual color laser scanning endomicroscope capable of fluorescence lifetime endomicroscopy at one frame per second (FPS). The scanning system uses a coherent imaging fiber with 30,000 cores. High-speed lifetime imaging is achieved by distributing the signal over an array of 1024 parallel single-photon avalanche photo--diode detectors (SPADs), minimizing detection dead time maximizing the number of photons detected per excitation pulse without photon pile--up to achieve the high frame rate. Dual color fluorescence imaging is achieved by temporally shifting the dual excitation lasers, with respect to each other, to separate the two spectrally distinct fluorescent decays. Combining the temporal encoding, to provide spectral separation, with lifetime measurements we show a one FPS, multi-channel endomicroscopy platform for clinical applications and diagnosis. We demonstrate the potential of the system by imaging smartprobe-labeled bacteria in ex vivo samples of human lung using lifetime to differentiate bacterial fluorescence from the strong background lung auto--fluorescence which was used to provide structural information.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
High fidelity fibre-based physiological sensing deep in tissue
Authors:
Tushar R. Choudhary,
Michael G. Tanner,
Alicia Megia-Fernandez,
Kerrianne Harrington,
Harry A. Wood,
Adam Marshall,
Patricia Zhu,
Sunay V. Chankeshwara,
Debaditya Choudhury,
Graham Monro,
Muhammed Ucuncu,
Fei Yu,
Rory R. Duncan,
Robert R. Thomson,
Kevin Dhaliwal,
Mark Bradley
Abstract:
Physiological sensing deep in tissue, remains a clinical challenge. Here a flexible miniaturised sensing optrode providing a platform to perform minimally invasive in vivo in situ measurements is reported. Silica microspheres covalently coupled with a high density of ratiometrically configured fluorophores were deposited into etched pits on the distal end of a 150 micron diameter multicore optical…
▽ More
Physiological sensing deep in tissue, remains a clinical challenge. Here a flexible miniaturised sensing optrode providing a platform to perform minimally invasive in vivo in situ measurements is reported. Silica microspheres covalently coupled with a high density of ratiometrically configured fluorophores were deposited into etched pits on the distal end of a 150 micron diameter multicore optical fibre. With this platform, multiplexed photonic measurements of pH and oxygen concentration with high precision in the distal alveolar space of the lung is reported. We demonstrated the phenomenon that high-density deposition of carboxyfluorescein covalently coupled to silica microspheres shows an inverse shift in fluorescence in response to varying pH. This platform delivered fast and accurate measurements, near instantaneous response time, no photobleaching, immunity to power fluctuations and a flexible architecture for addition of multiple sensors.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
Optimizing astrophotonic spatial reformatters using simulated on-sky performance
Authors:
Theodoros Anagnos,
Robert J. Harris,
Mark K. Corrigan,
Andrew P. Reeves,
Matthew J. Townson,
David G. MacLachlan,
Robert R. Thomson,
Tim J. Morris,
Christian Schwab,
Andreas Quirrenbach
Abstract:
One of the most useful techniques in astronomical instrumentation is image slicing. It enables a spectrograph to have a more compact angular slit, whilst retaining throughput and increasing resolving power. Astrophotonic components like the photonic lanterns and photonic reformatters can be used to replace bulk optics used so far. This study investigates the performance of such devices using end-t…
▽ More
One of the most useful techniques in astronomical instrumentation is image slicing. It enables a spectrograph to have a more compact angular slit, whilst retaining throughput and increasing resolving power. Astrophotonic components like the photonic lanterns and photonic reformatters can be used to replace bulk optics used so far. This study investigates the performance of such devices using end-to-end simulations to approximate realistic on-sky conditions. It investigates existing components, tries to optimize their performance and aims to understand better how best to design instruments to maximize their performance. This work complements the recent work in the field and provides an estimation for the performance of the new components.
△ Less
Submitted 17 July, 2018;
originally announced July 2018.
-
Experimental observation of Aharonov-Bohm cages in photonic lattices
Authors:
Sebabrata Mukherjee,
Marco Di Liberto,
Patrik Öhberg,
Robert R. Thomson,
Nathan Goldman
Abstract:
We report on the experimental realization of a uniform synthetic magnetic flux and the observation of Aharonov-Bohm cages in photonic lattices. Considering a rhombic array of optical waveguides, we engineer modulation-assisted tunneling processes that effectively produce non-zero magnetic flux per plaquette. This synthetic magnetic field for light can be tuned at will by varying the phase of the m…
▽ More
We report on the experimental realization of a uniform synthetic magnetic flux and the observation of Aharonov-Bohm cages in photonic lattices. Considering a rhombic array of optical waveguides, we engineer modulation-assisted tunneling processes that effectively produce non-zero magnetic flux per plaquette. This synthetic magnetic field for light can be tuned at will by varying the phase of the modulation. In the regime where half a flux quantum is realized in each plaquette, all the energy bands dramatically collapse into non-dispersive (flat) bands and all eigenstates are completely localized. We demonstrate this Aharonov-Bohm caging by studying the propagation of light in the bulk of the photonic lattice. Besides, we explore the dynamics on the edge of the lattice and discuss how the corresponding edge states can be continuously connected to the topological edge states of the Creutz ladder. Our photonic lattice constitutes an appealing platform where the interplay between engineered gauge fields, frustration, localization and topological properties can be finely studied.
△ Less
Submitted 6 August, 2018; v1 submitted 9 May, 2018;
originally announced May 2018.
-
Simulation and Optimization of an Astrophotonic Reformatter
Authors:
Th. Anagnos,
R. J. Harris,
M. K. Corrigan,
A. P. Reeves,
M. J. Townson,
D. G. MacLachlan,
R. R. Thomson,
T. J. Morris,
C. Schwab,
A. Quirrenbach
Abstract:
Image slicing is a powerful technique in astronomy. It allows the instrument designer to reduce the slit width of the spectrograph, increasing spectral resolving power whilst retaining throughput. Conventionally this is done using bulk optics, such as mirrors and prisms, however more recently astrophotonic components known as photonic lanterns (PLs) and photonic reformatters have also been used. T…
▽ More
Image slicing is a powerful technique in astronomy. It allows the instrument designer to reduce the slit width of the spectrograph, increasing spectral resolving power whilst retaining throughput. Conventionally this is done using bulk optics, such as mirrors and prisms, however more recently astrophotonic components known as photonic lanterns (PLs) and photonic reformatters have also been used. These devices reformat the multi-mode (MM) input light from a telescope into single-mode (SM) outputs, which can then be re-arranged to suit the spectrograph. The photonic dicer (PD) is one such device, designed to reduce the dependence of spectrograph size on telescope aperture and eliminate modal noise. We simulate the PD, by optimising the throughput and geometrical design using Soapy and BeamProp. The simulated device shows a transmission between 8 and 20 %, depending upon the type of adaptive optics (AO) correction applied, matching the experimental results well. We also investigate our idealised model of the PD and show that the barycentre of the slit varies only slightly with time, meaning that the modal noise contribution is very low when compared to conventional fibre systems. We further optimise our model device for both higher throughput and reduced modal noise. This device improves throughput by 6.4 % and reduces the movement of the slit output by 50%, further improving stability. This shows the importance of properly simulating such devices, including atmospheric effects. Our work complements recent work in the field and is essential for optimising future photonic reformatters.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
State-recycling and time-resolved imaging in topological photonic lattices
Authors:
Sebabrata Mukherjee,
Harikumar K. Chandrasekharan,
Patrik Öhberg,
Nathan Goldman,
Robert R. Thomson
Abstract:
Photonic lattices - arrays of optical waveguides - are powerful platforms for simulating a range of phenomena, including topological phases. While probing dynamics is possible in these systems, by reinterpreting the propagation direction as "time," accessing long timescales constitutes a severe experimental challenge. Here, we overcome this limitation by placing the photonic lattice in a cavity, w…
▽ More
Photonic lattices - arrays of optical waveguides - are powerful platforms for simulating a range of phenomena, including topological phases. While probing dynamics is possible in these systems, by reinterpreting the propagation direction as "time," accessing long timescales constitutes a severe experimental challenge. Here, we overcome this limitation by placing the photonic lattice in a cavity, which allows the optical state to evolve through the lattice multiple times. The accompanying detection method, which exploits a multi-pixel single-photon detector array, offers quasi-real time-resolved measurements after each round trip. We apply the state-recycling scheme to intriguing photonic lattices emulating Dirac fermions and Floquet topological phases. In this new platform, we also realise a synthetic pulsed electric field, which can be used to drive transport within photonic lattices. This work opens a new route towards the detection of long timescale effects in engineered photonic lattices and the realization of hybrid analogue-digital simulators.
△ Less
Submitted 13 July, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
Observation of Ground and Excited Flat Band States in Graphene Photonic Ribbons
Authors:
Camilo Cantillano,
Sebabrata Mukherjee,
Luis Morales-Inostroza,
Bastián Real,
Gabriel Cáceres-Aravena,
Carla Hermann-Avigliano,
Robert R. Thomson,
Rodrigo A. Vicencio
Abstract:
Understanding the wave transport and localisation is a major goal in the study of lattices of different nature. In general, inhibiting the energy transport on a perfectly periodic and disorder-free system is challenging, however, some specific lattice geometries allow localisation due to the presence of dispersionless (flat) bands in the energy spectrum. Here, we report on the experimental realisa…
▽ More
Understanding the wave transport and localisation is a major goal in the study of lattices of different nature. In general, inhibiting the energy transport on a perfectly periodic and disorder-free system is challenging, however, some specific lattice geometries allow localisation due to the presence of dispersionless (flat) bands in the energy spectrum. Here, we report on the experimental realisation of a quasi-one-dimensional photonic graphene ribbon supporting four flat-bands. We study the dynamics of fundamental and dipolar modes, which are analogous to the s and p orbitals, respectively. In the experiment, both modes (orbitals) are effectively decoupled from each other, implying two sets of six bands, where two of them are completely flat. Using an image generator setup, we excite the s and p flat band modes and demonstrate their non-diffracting propagation for the first time. Our results open an exciting route towards photonic emulation of higher orbital dynamics.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
Integrated optics prototype beam combiner for long baseline interferometry in the L and M bands
Authors:
Jan Tepper,
Lucas Labadie,
Romina Diener,
Stefano Minardi,
Jörg-Uwe Pott,
Robert R. Thomson,
Stefan Nolte
Abstract:
In the last few years, integrated optics (IO) beam combiners have facilitated the emergence of 4-telescope interferometers such as PIONIER or GRAVITY, boosting the imaging capabilities of the VLTI. However, the spectral range beyond 2.2microns is not ideally covered by the conventional silica based IO. Here, we propose to consider new laser-written IO prototypes made of GLS glasses, a material tha…
▽ More
In the last few years, integrated optics (IO) beam combiners have facilitated the emergence of 4-telescope interferometers such as PIONIER or GRAVITY, boosting the imaging capabilities of the VLTI. However, the spectral range beyond 2.2microns is not ideally covered by the conventional silica based IO. Here, we propose to consider new laser-written IO prototypes made of GLS glasses, a material that permits access to the mid-infrared spectral regime. Our goal is to conduct a full characterization of our mid-IR IO 2-telescope coupler in order to measure the performance levels directly relevant for long-baseline interferometry. We focus in particular on the exploitation of the L and M astronomical bands. We use a dedicated Michelson-interferometer setup to perform Fourier Transform spectroscopy on the coupler and measure its broadband interferometric performance. We also analyze the polarization properties of the coupler, the differential dispersion and phase degradation as well as the modal behavior and the total throughput. We measure broadband interferometric contrasts of 94.9% and 92.1% for unpolarized light in the L and M bands. Spectrally integrated splitting ratios are close to 50% but show chromatic dependence over the considered bandwidths. Additionally, the phase variation due to the combiner is measured and does not exceed 0.04rad and 0.07rad across the band L and M band, respectively. The total throughput of the coupler including Fresnel and injection losses from free-space is 25.4%. The laser-written IO GLS prototype combiners prove to be a reliable technological solution with promising performance for mid-infrared long-baseline interferometry. In the next steps, we will consider more advanced optical functions as well as a fiber-fed input and revise the optical design parameters in order the further enhance the total throughput and achromatic behavior.
△ Less
Submitted 19 April, 2017;
originally announced April 2017.
-
Observation of robust flat-band localization in driven photonic rhombic lattices
Authors:
Sebabrata Mukherjee,
Robert R. Thomson
Abstract:
We demonstrate that a flat-band state in a quasi-one-dimensional rhombic lattice is robust in the presence of external drivings along the lattice axis. The lattice was formed by periodic arrays of evanescently coupled optical waveguides, and the external drivings were realized by modulating the paths of the waveguides. We excited a superposition of flat-band eigenmodes at the input and observed th…
▽ More
We demonstrate that a flat-band state in a quasi-one-dimensional rhombic lattice is robust in the presence of external drivings along the lattice axis. The lattice was formed by periodic arrays of evanescently coupled optical waveguides, and the external drivings were realized by modulating the paths of the waveguides. We excited a superposition of flat-band eigenmodes at the input and observed that this state does not diffract in the presence of static as well as high-frequency sinusoidal drivings. This robust localization is due to destructive interference of the analogous wavefunction and is associated with the symmetry in the lattice geometry. We then excited the dispersive bands and observed Bloch oscillations and coherent destruction of tunneling. {\textcopyright} 2017 Optical Society of America.
△ Less
Submitted 15 May, 2017; v1 submitted 21 March, 2017;
originally announced March 2017.
-
Dissipatively Coupled Waveguide Networks for Coherent Diffusive Photonics
Authors:
Sebabrata Mukherjee,
Dmitri Mogilevtsev,
Gregory Ya. Slepyan,
Thomas H. Doherty,
Robert R. Thomson,
Natalia Korolkova
Abstract:
A photonic circuit is generally described as a structure in which light propagates by unitary exchange and transfers reversibly between channels. In contrast, the term `diffusive' is more akin to a chaotic propagation in scattering media, where light is driven out of coherence towards a thermal mixture. Based on the dynamics of open quantum systems, the combination of these two opposites can resul…
▽ More
A photonic circuit is generally described as a structure in which light propagates by unitary exchange and transfers reversibly between channels. In contrast, the term `diffusive' is more akin to a chaotic propagation in scattering media, where light is driven out of coherence towards a thermal mixture. Based on the dynamics of open quantum systems, the combination of these two opposites can result in novel techniques for coherent light control. The crucial feature of these photonic structures is dissipative coupling between modes, via an interaction with a common reservoir. Here, we demonstrate experimentally that such systems can perform optical equalisation to smooth multimode light, or act as a distributor, guiding it into selected channels. Quantum thermodynamically, these systems can act as catalytic coherent reservoirs by performing perfect non-Landauer erasure. For lattice structures, localised stationary states can be supported in the continuum, similar to compacton-like states in conventional flat band lattices.
△ Less
Submitted 20 November, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Ballistic and snake photon imaging for locating optical endomicroscopy fibres
Authors:
M. G. Tanner,
T. R. Choudhary,
T. H. Craven,
B. Mills,
M. Bradley,
R. K. Henderson,
K. Dhaliwal,
R. R. Thomson
Abstract:
We demonstrate determination of the location of the distal-end of a fibre-optic device deep in tissue through the imaging of ballistic and snake photons using a time resolved single-photon detector array. The fibre was imaged with centimetre resolution, within clinically relevant settings and models. This technique can overcome the limitations imposed by tissue scattering in optically determining…
▽ More
We demonstrate determination of the location of the distal-end of a fibre-optic device deep in tissue through the imaging of ballistic and snake photons using a time resolved single-photon detector array. The fibre was imaged with centimetre resolution, within clinically relevant settings and models. This technique can overcome the limitations imposed by tissue scattering in optically determining the in vivo location of fibre-optic medical instruments.
△ Less
Submitted 18 August, 2017; v1 submitted 13 March, 2017;
originally announced March 2017.
-
The Pan-STARRS1 Surveys
Authors:
K. C. Chambers,
E. A. Magnier,
N. Metcalfe,
H. A. Flewelling,
M. E. Huber,
C. Z. Waters,
L. Denneau,
P. W. Draper,
D. Farrow,
D. P. Finkbeiner,
C. Holmberg,
J. Koppenhoefer,
P. A. Price,
A. Rest,
R. P. Saglia,
E. F. Schlafly,
S. J. Smartt,
W. Sweeney,
R. J. Wainscoat,
W. S. Burgett,
S. Chastel,
T. Grav,
J. N. Heasley,
K. W. Hodapp,
R. Jedicke
, et al. (101 additional authors not shown)
Abstract:
Pan-STARRS1 has carried out a set of distinct synoptic imaging sky surveys including the $3π$ Steradian Survey and the Medium Deep Survey in 5 bands ($grizy_{P1}$). The mean 5$σ$ point source limiting sensitivities in the stacked 3$π$ Steradian Survey in $grizy_{P1}$ are (23.3, 23.2, 23.1, 22.3, 21.4) respectively. The upper bound on the systematic uncertainty in the photometric calibration across…
▽ More
Pan-STARRS1 has carried out a set of distinct synoptic imaging sky surveys including the $3π$ Steradian Survey and the Medium Deep Survey in 5 bands ($grizy_{P1}$). The mean 5$σ$ point source limiting sensitivities in the stacked 3$π$ Steradian Survey in $grizy_{P1}$ are (23.3, 23.2, 23.1, 22.3, 21.4) respectively. The upper bound on the systematic uncertainty in the photometric calibration across the sky is 7-12 millimag depending on the bandpass. The systematic uncertainty of the astrometric calibration using the Gaia frame comes from a comparison of the results with Gaia: the standard deviation of the mean and median residuals ($ Δra, Δdec $) are (2.3, 1.7) milliarcsec, and (3.1, 4.8) milliarcsec respectively. The Pan-STARRS system and the design of the PS1 surveys are described and an overview of the resulting image and catalog data products and their basic characteristics are described together with a summary of important results. The images, reduced data products, and derived data products from the Pan-STARRS1 surveys are available to the community from the Mikulski Archive for Space Telescopes (MAST) at STScI.
△ Less
Submitted 28 January, 2019; v1 submitted 16 December, 2016;
originally announced December 2016.
-
Astronomical photonics in the context of infrared interferometry and high-resolution spectroscopy
Authors:
Lucas Labadie,
Jean-Philippe Berger,
Nick Cvetojevic,
Roger Haynes,
Robert Harris,
Nemanja Jovanovic,
Sylvestre Lacour,
Guillermo Martin,
Stefano Minardi,
Guy Perrin,
Martin Roth,
Robert R. Thomson
Abstract:
We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also cons…
▽ More
We review the potential of Astrophotonics, a relatively young field at the interface between photonics and astronomical instrumentation, for spectro-interferometry. We review some fundamental aspects of photonic science that drove the emer- gence of astrophotonics, and highlight the achievements in observational astrophysics. We analyze the prospects for further technological development also considering the potential synergies with other fields of physics (e.g. non-linear optics in condensed matter physics). We also stress the central role of fiber optics in routing and transporting light, delivering complex filters, or interfacing instruments and telescopes, more specifically in the context of a growing usage of adaptive optics.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
Beam combination schemes and technologies for the Planet Formation Imager (PFI)
Authors:
Stefano Minardi,
Sylvestre Lacour,
Jean-Philippe Berger,
Lucas Labadie,
Robert R. Thomson,
Chris Haniff,
Michael Ireland
Abstract:
The Planet Formation Imager (PFI) initiative aims at develo** the next generation large scale facility for imaging astronomical optical interferometry operating in the mid-infrared. Here we report on the progress of the Planet Formation Imager Technical Working Group on the beam-combination instruments. We will discuss various available options for the science and fringe-tracker beam combination…
▽ More
The Planet Formation Imager (PFI) initiative aims at develo** the next generation large scale facility for imaging astronomical optical interferometry operating in the mid-infrared. Here we report on the progress of the Planet Formation Imager Technical Working Group on the beam-combination instruments. We will discuss various available options for the science and fringe-tracker beam combination instruments, ranging from direct imaging, to non-redundant fiber arrays, to integrated optics solutions. Besides considering basic characteristics of the schemes, we will investigate the maturity of the available technological platforms at near- and mid-infrared wavelengths.
△ Less
Submitted 17 August, 2016; v1 submitted 1 August, 2016;
originally announced August 2016.
-
Performance estimates for spectrographs using photonic reformatters
Authors:
Robert. J. Harris,
Lucas Labadie,
Ulrike Lemke,
David G. MacLachlan,
Robert R. Thomson,
Sabine Reffert,
Andreas Quirrenbach
Abstract:
Using a photonic reformatter to eliminate the effects of conventional modal noise could greatly improve the stability of a high resolution spectrograph. However the regimes where this advantage becomes clear are not yet defined. Here we will look at where modal noise becomes a problem in conventional high resolution spectroscopy and what impact photonic spectrographs could have. We will theoretica…
▽ More
Using a photonic reformatter to eliminate the effects of conventional modal noise could greatly improve the stability of a high resolution spectrograph. However the regimes where this advantage becomes clear are not yet defined. Here we will look at where modal noise becomes a problem in conventional high resolution spectroscopy and what impact photonic spectrographs could have. We will theoretically derive achievable radial velocity measurements to compare photonic instruments and conventional ones. We will discuss the theoretical and experimental investigations that will need to be undertaken to optimize and prove the photonic reformatting concept.
△ Less
Submitted 28 July, 2016;
originally announced July 2016.
-
Modal noise characterisation of a hybrid reformatter
Authors:
Izabela Spaleniak,
David G. MacLachlan,
Itandehui Gris-Sánchez,
Debaditya Choudhury,
Robert J. Harris,
Alexander Arriola,
Jeremy R. Allington-Smith,
Timothy A. Birks,
Robert R. Thomson
Abstract:
This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes. Photonic lanterns transform a multimode signal into an array of single-mode signals, and thus combine the high coupling efficiency of multimode fibres with the d…
▽ More
This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes. Photonic lanterns transform a multimode signal into an array of single-mode signals, and thus combine the high coupling efficiency of multimode fibres with the diffraction-limited performance of single-mode fibres. This paper presents experimental measurements of the device point spread function properties under different coupling conditions, and its throughput behaviour at high spectral resolution. The device demonstrates excellent scrambling but its point spread function is not completely stable. Mode field diameter and mode barycentre position at the device output vary as the multicore-fibre is agitated due to the fabrication imperfections.
△ Less
Submitted 11 July, 2016;
originally announced July 2016.
-
Experimental observation of anomalous topological edge modes in a slowly-driven photonic lattice
Authors:
Sebabrata Mukherjee,
Alexander Spracklen,
Manuel Valiente,
Erika Andersson,
Patrik Öhberg,
Nathan Goldman,
Robert R. Thomson
Abstract:
The discovery of the quantised Hall effect, and its subsequent topological explanation, demonstrated the important role topology can play in determining the properties of quantum systems. This realisation led to the development of topological band theory, where, in addition to band index and quasimomentum, Bloch bands are also characterised by a set of topological invariants. This topological theo…
▽ More
The discovery of the quantised Hall effect, and its subsequent topological explanation, demonstrated the important role topology can play in determining the properties of quantum systems. This realisation led to the development of topological band theory, where, in addition to band index and quasimomentum, Bloch bands are also characterised by a set of topological invariants. This topological theory can be readily extended to periodically-driven systems. In the limit of fast driving, the topology of the system can still be captured by the topological invariants used to describe static systems. In the limit of slow driving, however, situations can arise where standard topological invariants are zero, but yet, topologically protected edge modes are still observed. These "anomalous" topological edge modes have no static analogue, and are associated with a distinct topological invariant, which takes into account the full time-evolution over a driving period. Here we demonstrate the first experimental observation of such anomalous topological edge modes in an ultrafast-laser-inscribed photonic lattice. This inscription technique allows one to address each bond of a lattice independently and dynamically, generating a rich band structure with robust anomalous chiral edge modes and the potential for perfectly localised bulk states.
△ Less
Submitted 20 April, 2016; v1 submitted 19 April, 2016;
originally announced April 2016.
-
Multiplexed Single-Mode Wavelength-to-Time Map** of Multimode Light
Authors:
Harikumar K. Chandrasekharan,
Frauke Izdebski,
Itandehui Gris-Sánchez,
Nikola Krstajić,
Richard Walker,
Helen L. Bridle,
Paul A. Dalgarno,
William N. MacPherson,
Robert K. Henderson,
Tim A. Birks,
Robert R. Thomson
Abstract:
We demonstrate that photonic lanterns based on tapered multicore fibres provide an efficient way to couple multimode states of light to a two-dimensional array of Single-Photon Avalanche Detectors (SPADs), each of which has its own Time-to-Digital Converter (TDC) for Time-Correlated Single-Photon-Counting (TCSPC). Exploiting this capability, we demonstrate multiplexed single-mode wavelength-to-tim…
▽ More
We demonstrate that photonic lanterns based on tapered multicore fibres provide an efficient way to couple multimode states of light to a two-dimensional array of Single-Photon Avalanche Detectors (SPADs), each of which has its own Time-to-Digital Converter (TDC) for Time-Correlated Single-Photon-Counting (TCSPC). Exploiting this capability, we demonstrate multiplexed single-mode wavelength-to-time conversion of multimode states of light using a multicore-fibre photonic lantern with 121 single-mode cores, coupled in a one-to-one fashion to 121 SPADS on a 32 $\times$ 32 pixel CMOS SPAD array. The application of photonic lanterns for coupling multimode light to SPAD arrays in this manner may find wide-ranging applications in areas such as Raman spectroscopy, coherent LIDAR and quantum optics.
△ Less
Submitted 26 April, 2016; v1 submitted 8 April, 2016;
originally announced April 2016.