Showing 1–50 of 137 results for author: Thom, J

On the characteristics of helium filled nano-pores in amorphous silicon thin films

Authors: Bertrand Lacroix, Asunción Fernández, N. C. Pyper, Alex J. W. Thom, Colm T. Whelan

Abstract: The properties of helium-filled nanopores in amorphous silicon are elucidated by combining theoretical knowledge of helium electronic structure with the results of Scanning Transmission electron microscopy/electron energy loss spectroscopy (STEM/EELS). Two of the properties determined are the density and pressure of the confined helium, these being key properties which are needed for application.… ▽ More The properties of helium-filled nanopores in amorphous silicon are elucidated by combining theoretical knowledge of helium electronic structure with the results of Scanning Transmission electron microscopy/electron energy loss spectroscopy (STEM/EELS). Two of the properties determined are the density and pressure of the confined helium, these being key properties which are needed for application. The experimental data consists, firstly of the shift of the helium 1s^2-> 1s2p(^1P) excitation energy from that of a free atom upon entering a condensed phase, and secondly, the intensities of both the elastically and inelastically scattered electron beams. Analysis uniting theory with the STEM/EELS measurements for both the helium-filled pores and earlier similar studies of helium encapsulated as bubbles in solid silicon is combined with fully trustworthy and closely related data for helium in its bulk condensed phases. The non-empirical theory used, containing no free parameters, is validated by the excellent agreement between the energy shifts predicted for bulk condensed helium with the entirely independently measured values. The above comparisons between the pores and bubbles with the bulk material show that the helium behaviour is essentially the same in all three of these environments. This means that, although the pressure is clearly temperature dependent, the other important properties are governed solely by the helium density. Although the energy of the electron beam used for the pore measurements differs from that in the bubble experiments, it is shown that scaling the results of either the pore or bubbles results using standard scattering theory almost exactly reproduces the experimental results for the other system. This provides confirmatory evidence that the behaviour of the helium in the pores is essentially the same as that in the bubbles. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Targeting spectroscopic accuracy for dispersion bound systems from ab initio techniques: translational eigenstates of Ne@C$_{70}$

Authors: K. Panchagnula, D. Graf, E. R. Johnson, A. J. W. Thom

Abstract: We investigate the endofullerene system Ne@C$_{70}$, by constructing a three-dimensional Potential Energy Surface (PES) describing the translational motion of the Ne atom. We compare a plethora of electronic structure methods including: MP2, SCS-MP2, SOS-MP2, RPA@PBE, C(HF)-RPA, which were previously used for He@C$_{60}$ in J. Chem. Phys. 160, 104303 (2024), alongside B86bPBE-25X-XDM and B86bPBE-5… ▽ More We investigate the endofullerene system Ne@C$_{70}$, by constructing a three-dimensional Potential Energy Surface (PES) describing the translational motion of the Ne atom. We compare a plethora of electronic structure methods including: MP2, SCS-MP2, SOS-MP2, RPA@PBE, C(HF)-RPA, which were previously used for He@C$_{60}$ in J. Chem. Phys. 160, 104303 (2024), alongside B86bPBE-25X-XDM and B86bPBE-50X-XDM. The reduction in symmetry moving from C$_{60}$ to C$_{70}$ introduces a double well potential along the anisotropic direction, which forms a test of the sensitivity and effectiveness of the methods. Due to the large cost of these calculations, the PES is interpolated using Gaussian Process Regression due to its effectiveness with sparse training data. The nuclear Hamiltonian is diagonalised using a symmetrised double minimum basis set outlined in J. Chem. Phys. 159, 164308 (2023), with translational energies having error bars $\pm 1$ and $\pm 2$ cm$^{-1}$. We quantify the shape of the ground state wavefunction by considering its prolateness and kurtosis, and compare the eigenfunctions between electronic structure methods from their Hellinger distance. We find no consistency between electronic structure methods as they find a range of barrier heights and minima positions of the double well, and different translational eigenspectra which also differ from the Lennard-Jones (LJ) PES given in J. Chem. Phys. 101, 2126,2140 (1994). We find that generating effective LJ parameters for each electronic structure method cannot reproduce the full PES, nor recreate the eigenstates and this suggests that the LJ form of the PES, while simple, may not be best suited to describe these systems. Even though MP2 and RPA@PBE performed best for He@C$_{60}$, due to the lack of concordance between all electronic structure methods we require more experimental data in order to properly validate the choice. △ Less

Submitted 11 June, 2024; originally announced June 2024.

Comments: 12 pages, 4 figures; SI 6 pages, 3 figures

Rapidly convergent quantum Monte Carlo using a Chebyshev projector

Authors: Zijun Zhao, Maria-Andreea Filip, Alex J W Thom

Abstract: The multi-reference coupled-cluster Monte Carlo (MR-CCMC) algorithm is a determinant-based quantum Monte Carlo (QMC) algorithm that is conceptually similar to Full Configuration Interaction QMC (FCIQMC). It has been shown to offer a balanced treatment of both static and dynamic correlation while retaining polynomial scaling, although application to large systems with significant strong correlation… ▽ More The multi-reference coupled-cluster Monte Carlo (MR-CCMC) algorithm is a determinant-based quantum Monte Carlo (QMC) algorithm that is conceptually similar to Full Configuration Interaction QMC (FCIQMC). It has been shown to offer a balanced treatment of both static and dynamic correlation while retaining polynomial scaling, although application to large systems with significant strong correlation remained impractical. In this paper, we document recent algorithmic advances that enable rapid convergence and a more black-box approach to the multi-reference problem. These include a logarithmically scaling metric-tree based excitation acceptance algorithm to search for determinants connected to the reference space at the desired excitation level and a symmetry-screening procedure for the reference space. We show that, for moderately sized reference spaces, the new search algorithm brings about an approximately 8-fold acceleration of one MR-CCMC iteration, while the symmetry screening procedure reduces the number of active reference space determinants at essentially no loss of accuracy. We also introduce a stochastic implementation of an approximate wall projector, which is the infinite imaginary time limit of the exponential projector, using a truncated expansion of the wall function in Chebyshev polynomials. Notably, this wall-Chebyshev projector can be used to accelerate any projector-based QMC algorithm. We show that it requires significantly fewer applications of the Hamiltonian to achieve the same statistical convergence. We benchmark these acceleration methods on the beryllium and carbon dimers, using initiator FCIQMC and MR-CCMC with basis sets up to cc-pVQZ quality. △ Less

Submitted 1 May, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Comments: 12 pages, 13 figures

Journal ref: https://pubs.rsc.org/en/Content/ArticleLanding/2024/FD/D4FD00035H

Locality Sensitive Hashing for Network Traffic Fingerprinting

Authors: Nowfel Mashnoor, Jay Thom, Abdur Rouf, Shamik Sengupta, Batyr Charyyev

Abstract: The advent of the Internet of Things (IoT) has brought forth additional intricacies and difficulties to computer networks. These gadgets are particularly susceptible to cyber-attacks because of their simplistic design. Therefore, it is crucial to recognise these devices inside a network for the purpose of network administration and to identify any harmful actions. Network traffic fingerprinting is… ▽ More The advent of the Internet of Things (IoT) has brought forth additional intricacies and difficulties to computer networks. These gadgets are particularly susceptible to cyber-attacks because of their simplistic design. Therefore, it is crucial to recognise these devices inside a network for the purpose of network administration and to identify any harmful actions. Network traffic fingerprinting is a crucial technique for identifying devices and detecting anomalies. Currently, the predominant methods for this depend heavily on machine learning (ML). Nevertheless, machine learning (ML) methods need the selection of features, adjustment of hyperparameters, and retraining of models to attain optimal outcomes and provide resilience to concept drifts detected in a network. In this research, we suggest using locality-sensitive hashing (LSH) for network traffic fingerprinting as a solution to these difficulties. Our study focuses on examining several design options for the Nilsimsa LSH function. We then use this function to create unique fingerprints for network data, which may be used to identify devices. We also compared it with ML-based traffic fingerprinting and observed that our method increases the accuracy of state-of-the-art by 12% achieving around 94% accuracy in identifying devices in a network. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: Conference Name: 2023 IEEE 29th International Symposium on Local and Metropolitan Area Networks (LANMAN) Date of Conference: 10-11 July 2023

Translational eigenstates of He@C$_{60}$ from four-dimensional \textit{ab initio} Potential Energy Surfaces interpolated using Gaussian Process Regression

Authors: K. Panchagnula, D. Graf, F. E. A. Albertani, A. J. W. Thom

Abstract: We investigate the endofullerene system $^3$He@C$_{60}$ with a four-dimensional Potential Energy Surface (PES) to include the three He translational degrees of freedom and C$_{60}$ cage radius. We compare MP2, SCS-MP2, SOS-MP2, RPA@PBE and C(HF)-RPA to calibrate and gain confidence in the choice of electronic structure method. Due to the high cost of these calculations, the PES is interpolated usi… ▽ More We investigate the endofullerene system $^3$He@C$_{60}$ with a four-dimensional Potential Energy Surface (PES) to include the three He translational degrees of freedom and C$_{60}$ cage radius. We compare MP2, SCS-MP2, SOS-MP2, RPA@PBE and C(HF)-RPA to calibrate and gain confidence in the choice of electronic structure method. Due to the high cost of these calculations, the PES is interpolated using Gaussian Process Regression (GPR), owing to its effectiveness with sparse training data. The PES is split into a two-dimensional radial surface, to which corrections are applied to achieve an overall four-dimensional surface. The nuclear Hamiltonian is diagonalised to generate the in-cage translational/vibrational eigenstates. The degeneracy of the three-dimensional harmonic oscillator energies with principal quantum number $n$ is lifted due to the anharmonicity in the radial potential. The $(2l+1)$-fold degeneracy of the angular momentum states is also weakly lifted, due to the angular dependence in the potential. We calculate the fundamental frequency to range between 96cm$^{-1}$ and 110cm$^{-1}$ depending on the electronic structure method used. Error bars of the eigenstate energies were calculated from the GPR and are on the order of approximately $\pm$ 1.5cm$^{-1}$. Wavefunctions are also compared by considering their overlap and Hellinger distance to the one-dimensional empirical potential. As with the energies, the two \textit{ab initio} methods MP2 and RPA@PBE show the best agreement. While MP2 has better agreement than RPA@PBE, due to its higher computational efficiency and comparable performance, we recommend RPA as an alternative electronic structure method of choice to MP2 for these systems. △ Less

Submitted 18 March, 2024; v1 submitted 9 January, 2024; originally announced January 2024.

Comments: 14 pages, 5 figures; SI 6 pages, 4 figures. JCP Accepted version

Journal ref: J. Chem. Phys. 160, 104303 (2024)

Optimised Baranyai partitioning of the second quantised Hamiltonian

Authors: Bence Csakany, Alex J. W. Thom

Abstract: Simultaneous measurement of multiple Pauli strings (tensor products of Pauli matrices) is the basis for efficient measurement of observables on quantum computers by partitioning the observable into commuting sets of Pauli strings. We present the implementation and optimisation of the Baranyai grou** method for second quantised Hamiltonian partitioning in molecules up to CH$_4$ (cc-pVDZ, 68 qubit… ▽ More Simultaneous measurement of multiple Pauli strings (tensor products of Pauli matrices) is the basis for efficient measurement of observables on quantum computers by partitioning the observable into commuting sets of Pauli strings. We present the implementation and optimisation of the Baranyai grou** method for second quantised Hamiltonian partitioning in molecules up to CH$_4$ (cc-pVDZ, 68 qubits) and efficient construction of the diagonalisation circuit in $O(N)$ quantum gates, compared to $O(N^2)$, where $N$ is the number of qubits. We show that this method naturally handles sparsity in the Hamiltonian and produces a $O(1)$ number of groups for linearly scaling Hamiltonians, such as those formed by molecules in a line; rising to $O(N^3)$ for fully connected two-body Hamiltonians. While this is more measurements than some other schemes it allows for the flexibility to move Pauli strings and optimise the variance. We also present an explicit optimisation for spin-symmetry which reduces the number of groups by a factor of $8$, without extra computational effort. △ Less

Submitted 20 November, 2023; originally announced November 2023.

Corrected Density Functional Theory and the Random Phase Approximation: Improved Accuracy at Little Extra Cost

Authors: Daniel Graf, Alex J. W. Thom

Abstract: We recently introduced an efficient methodology to perform density-corrected Hartree-Fock density functional theory (DC(HF)-DFT) calculations and an extension to it we called "corrected" HF DFT (C(HF)-DFT). In this work, we take a further step and combine C(HF)-DFT, augmented with a straightforward orbital energy correction, with the random phase approximation (RPA). We refer to the resulting meth… ▽ More We recently introduced an efficient methodology to perform density-corrected Hartree-Fock density functional theory (DC(HF)-DFT) calculations and an extension to it we called "corrected" HF DFT (C(HF)-DFT). In this work, we take a further step and combine C(HF)-DFT, augmented with a straightforward orbital energy correction, with the random phase approximation (RPA). We refer to the resulting methodology as corrected HF RPA (C(HF)-RPA). We evaluate the proposed methodology across various RPA methods: direct RPA (dRPA), RPA with an approximate exchange kernel (RPA-AXK), and RPA with second-order screened exchange (RPA-SOSEX). C(HF)-dRPA, in particular, demonstrates very promising performance; for RPA with exchange methods we find over-corrections for certain chemical problems. △ Less

Submitted 1 July, 2023; originally announced July 2023.

Exploring the parameter space of an endohedral atom in a cylindrical cavity

Authors: K. Panchagnula, A. J. W. Thom

Abstract: Endohedral fullerenes, or endofullerenes, are chemical systems of fullerene cages encapsulating single atoms or small molecules. These species provide an interesting challenge of Potential Energy Surface (PES) determination as examples of non-covalently bonded, bound systems. While the majority of studies focus on C$_{60}$ as the encapsulating cage, introducing some anisotropy by using a different… ▽ More Endohedral fullerenes, or endofullerenes, are chemical systems of fullerene cages encapsulating single atoms or small molecules. These species provide an interesting challenge of Potential Energy Surface (PES) determination as examples of non-covalently bonded, bound systems. While the majority of studies focus on C$_{60}$ as the encapsulating cage, introducing some anisotropy by using a different fullerene, e.g., C$_{70}$ can unveil a double well potential along the unique axis. By approximating the potential as a pairwise Lennard-Jones (LJ) summation over the fixed C cage atoms, the parameter space of the Hamiltonian includes three tunable variables: $(M,\varepsilon,σ)$ representing the mass of the trapped species, the LJ energy, and length scales respectively. Fixing the mass and allowing the others to vary can imitate the potentials of endohedral species trapped in more elongated fullerenes. We choose to explore the LJ parameter space of an endohedral atom in C$_{70}$ with $\varepsilon\in$ [20cm$^{-1}$, 150cm$^{-1}$], and $σ\in$ [2.85Å , 3.05Å]. As the barrier height and positions of these wells vary between [1cm$^{-1}$, 264cm$^{-1}$] and [0.35Å, 0.85Å] respectively, using a 3D direct product basis of 1D harmonic oscillator (HO) wavefunctions centred at the origin where there is a local maximum is unphysical. Instead we propose the use of a non-orthogonal basis set, using 1D HO wavefunctions centred in each minimum and compare this to other choices. The ground state energy of the X@C$_{70}$ is tracked across the LJ parameter space, along with its corresponding nuclear translational wavefunctions. A classification of the wavefunction characteristics, namely the prolateness and ``peanut-likeness'' based on its statistical moments is also proposed. △ Less

Submitted 20 November, 2023; v1 submitted 14 June, 2023; originally announced June 2023.

Comments: 14 pages, 14 figures

Journal ref: J. Chem. Phys. 159, 164308 (2023)

Folded Spectrum VQE : A quantum computing method for the calculation of molecular excited states

Authors: Lila Cadi Tazi, Alex J. W. Thom

Abstract: The recent developments of quantum computing present potential novel pathways for quantum chemistry, as the increased computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g. Quantum Phase Estimation) but the limited capabilities of current noisy intermediat… ▽ More The recent developments of quantum computing present potential novel pathways for quantum chemistry, as the increased computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g. Quantum Phase Estimation) but the limited capabilities of current noisy intermediate scale quantum devices (NISQ) motivated the development of less demanding hybrid algorithms. In this context, the Variational Quantum Eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground state energy of small molecules. The current study investigates the Folded Spectrum (FS) method as an extension to the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy, using the same ansatz as for the ground state calculation. Inspired by the variance-based methods from the Quantum Monte Carlo literature, the FS method minimizes the energy variance, thus requiring a computationally expensive squared Hamiltonian. We alleviate this potentially poor scaling by employing a Pauli grou** procedure, identifying sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction of the computational cost. We apply the FS-VQE method to small molecules (H$_2$,LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. △ Less

Submitted 29 February, 2024; v1 submitted 8 May, 2023; originally announced May 2023.

Non-unitary Trotter circuits for imaginary time evolution

Authors: Chiara Leadbeater, Nathan Fitzpatrick, David Muñoz Ramo, Alex J. W. Thom

Abstract: We propose an imaginary time equivalent of the well-established Pauli gadget primitive for Trotter-decomposed real time evolution, using mid-circuit measurements on a single ancilla qubit. Imaginary time evolution (ITE) is widely used for obtaining the ground state of a system on classical hardware, computing thermal averages, and as a component of quantum algorithms that perform non-unitary evolu… ▽ More We propose an imaginary time equivalent of the well-established Pauli gadget primitive for Trotter-decomposed real time evolution, using mid-circuit measurements on a single ancilla qubit. Imaginary time evolution (ITE) is widely used for obtaining the ground state of a system on classical hardware, computing thermal averages, and as a component of quantum algorithms that perform non-unitary evolution. Near-term implementations on quantum hardware rely on heuristics, compromising their accuracy. As a result, there is growing interest in the development of more natively quantum algorithms. Since it is not possible to implement a non-unitary gate deterministically, we resort to the implementation of probabilistic imaginary time evolution (PITE) algorithms, which rely on a unitary quantum circuit to simulate a block encoding of the ITE operator - that is, they rely on successful ancillary measurements to evolve the system non-unitarily. Compared with previous PITE proposals, the suggested block encoding in this paper results in shorter circuits and is simpler to implement, requiring only a slight modification of the Pauli gadget primitive. This scheme was tested on the transverse Ising model and the fermionic Hubbard model and is demonstrated to converge to the ground state of the system. △ Less

Submitted 29 October, 2023; v1 submitted 16 April, 2023; originally announced April 2023.

Comments: Added more explanation of the Pauli gadget primitive and motivation for using Trotter decompositions

A simple and efficient route towards improved energetics within the framework of density-corrected density functional theory

Authors: Daniel Graf, Alex J. W. Thom

Abstract: The crucial step in density-corrected Hartree-Fock density functional theory (DC(HF)-DFT) is to decide whether the density produced by the density functional for a specific calculation is erroneous and hence should be replaced by, in this case, the HF density. We introduce an indicator, based on the difference in non-interacting kinetic energies between DFT and HF calculations, to determine when t… ▽ More The crucial step in density-corrected Hartree-Fock density functional theory (DC(HF)-DFT) is to decide whether the density produced by the density functional for a specific calculation is erroneous and hence should be replaced by, in this case, the HF density. We introduce an indicator, based on the difference in non-interacting kinetic energies between DFT and HF calculations, to determine when the HF density is the better option. Our kinetic energy indicator directly compares the self-consistent density of the analysed functional with the HF density, is size-intensive, reliable, and most importantly highly efficient. Moreover, we present a procedure that makes best use of the computed quantities necessary for DC(HF)-DFT by additionally evaluating a related hybrid functional and, in that way, not only "corrects" the density but also the functional itself; we call that procedure corrected Hartree-Fock density functional theory (C(HF)-DFT). △ Less

Submitted 10 April, 2023; originally announced April 2023.

A hybrid stochastic configuration interaction-coupled cluster approach for multireference systems

Authors: Maria-Andreea Filip, Alex J. W. Thom

Abstract: The development of multireference coupled cluster (MRCC) techniques has remained an open area of study in electronic structure theory for decades due to the inherent complexity of expressing a multi-configurational wavefunction in the fundamentally single-reference coupled cluster framework. The recently developed multireference coupled cluster Monte Carlo (mrCCMC) technique uses the formal simpli… ▽ More The development of multireference coupled cluster (MRCC) techniques has remained an open area of study in electronic structure theory for decades due to the inherent complexity of expressing a multi-configurational wavefunction in the fundamentally single-reference coupled cluster framework. The recently developed multireference coupled cluster Monte Carlo (mrCCMC) technique uses the formal simplicity of the Monte Carlo approach to Hilbert space quantum chemistry to avoid some of the complexities of conventional MRCC, but there is room for improvement in terms of accuracy and, particularly, computational cost. In this paper we explore the potential of incorporating ideas from conventional MRCC - namely the treatment of the strongly correlated space in a configuration interaction formalism - to the mrCCMC framework, leading to a series of methods with increasing relaxation of the reference space in the presence of external amplitudes. These techniques offer new balances of stability and cost against accuracy, as well as a means to better explore and better understand the structure of solutions to the mrCCMC equations. △ Less

Submitted 21 April, 2023; v1 submitted 4 February, 2023; originally announced February 2023.

Comments: 13 pages, 10 figures, 3 tables

Global descriptors of a water molecule for machine learning of potential energy surfaces

Authors: Fabio E. A. Albertani, Alex J. W. Thom

Abstract: Machine learning of multi-dimensional potential energy surfaces, from purely ab initio datasets, has seen substantial progress in the past years. Gaussian processes, a popular regression method, have been very successful at producing realistic potential energy surfaces from sparse datasets allowing to reduce the computational cost of highly accurate models. However, there are many choices one has… ▽ More Machine learning of multi-dimensional potential energy surfaces, from purely ab initio datasets, has seen substantial progress in the past years. Gaussian processes, a popular regression method, have been very successful at producing realistic potential energy surfaces from sparse datasets allowing to reduce the computational cost of highly accurate models. However, there are many choices one has to take in the design of the kernel and the feature space which can substantially change the performance and the characteristic of the model. In this study we explore different Gaussian processes set ups and, more specifically, how the permutational invariance of the target surface is controlled through the feature space selection. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Comments: 12 pages, 16 figures

Studies on the Transcorrelated Method

Authors: Nicholas Lee, Alex J. W. Thom

Abstract: We investigate the possibility of using a transcorrelated Hamiltonian to describe electron correlation. Amethod to obtain transcorrelatedwavefunctionswas developed based on the mathematical framework of the bi-variational principle. This involves the construction of an effective transcorrelated Hamiltonian matrix which can be solved in a self-consistent manner. This was optimised using a method we… ▽ More We investigate the possibility of using a transcorrelated Hamiltonian to describe electron correlation. Amethod to obtain transcorrelatedwavefunctionswas developed based on the mathematical framework of the bi-variational principle. This involves the construction of an effective transcorrelated Hamiltonian matrix which can be solved in a self-consistent manner. This was optimised using a method we call Second Order Moment (SOM) minimisation to give highly accurate energies for some closed-shell atoms and helium-like ions. The effect of certain correlator terms on the description of electron-electron and electron-nuclear cusps were also examined graphically and some transcorrelated wavefunctions were compared against near-exact Hylleraas wavefunctions. △ Less

Submitted 6 January, 2023; originally announced January 2023.

Optimised Morse transform of a Gaussian process feature space

Authors: Fabio E. A. Albertani, Alex J. W. Thom

Abstract: Morse projections are well-known in chemistry and allow one, within a Morse potential approximation, to redefine the potential in a simple quadratic form. The latter, being a non-linear transform, is also very helpful for machine learning methods as they improve the performance of models by projecting the feature space onto more well-suited coordinates. Usually, the Morse projection parameters are… ▽ More Morse projections are well-known in chemistry and allow one, within a Morse potential approximation, to redefine the potential in a simple quadratic form. The latter, being a non-linear transform, is also very helpful for machine learning methods as they improve the performance of models by projecting the feature space onto more well-suited coordinates. Usually, the Morse projection parameters are taken from numerical benchmarks. We investigate the effect of changing these parameters latter on the model learning, as well as using the machine learning method itself to make the parameters decision. We find that learning is not necessarily improved by the latter and that general Morse projections are extremely susceptible to changes in the training data. △ Less

Submitted 5 January, 2023; originally announced January 2023.

Comments: 11 pages, 13 figures

Modified noise kernels in Gaussian process modelling of energy surfaces

Authors: Fabio E. A. Albertani, Alex J. W. Thom

Abstract: We explore the use of non homogenous noise kernels in Gaussian process modelling to improve the potential energy curve models describing stochastic electronic structure data. We use the same noise kernels on energy curves describing deterministic electronic structure data by creating non-homogenous noise model. We observe, as well as agreement between the noise of the model and the stochastic data… ▽ More We explore the use of non homogenous noise kernels in Gaussian process modelling to improve the potential energy curve models describing stochastic electronic structure data. We use the same noise kernels on energy curves describing deterministic electronic structure data by creating non-homogenous noise model. We observe, as well as agreement between the noise of the model and the stochastic data, a strong regularisation of the curves when using artificial noises on deterministic data which improves Gaussian processes in the over fitting regime. △ Less

Submitted 30 December, 2022; originally announced December 2022.

Comments: 6 pages, 8 figures

The density and pressure of helium nano-bubbles encapsulated in silicon

Authors: N. C. Pyper, A. J. W. Thom, Colm T. Whelan

Abstract: The $1s^2->1s2p(^1P)$ excitation in confined and compressed helium atoms in either the bulk material or encapsulated in a bubble is shifted to energies higher than that in the free atom. For bulk helium, the energy shifts predicted from non-empirical electronic structure computations are in excellent agreement with the experimentally determined values. However, there are significant discrepancies… ▽ More The $1s^2->1s2p(^1P)$ excitation in confined and compressed helium atoms in either the bulk material or encapsulated in a bubble is shifted to energies higher than that in the free atom. For bulk helium, the energy shifts predicted from non-empirical electronic structure computations are in excellent agreement with the experimentally determined values. However, there are significant discrepancies both between the results of experiments on different bubbles and between these and the well established descriptions of the bulk. A critique is presented of previous attempts to determine the densities in bubbles by measuring the intensities of the electrons inelastically scattered in STEM experiments. The reported densities are untrustworthy because it was assumed that the cross section for inelastic electron scattering was the same as that of a free atom whilst it is now known that this property is greatly enhanced for atoms confined at significant pressures. It is shown how experimental measurements of bubbles can be combined with data on the bulk using a graphical method to determine whether the behavior of an encapsulated guest differs from that in the bulk material. Experimental electron energy loss data from an earlier study of helium encapsulated in silicon is reanalyzed using this new method to show that the properties of the helium in these bubbles do not differ significantly from those in the bulk thereby enabling the densities in the bubbles to be determined. These enable the bubble pressures to be deduced from a well established experimentally derived equation of state. It is shown that the errors of up to 80% in the incorrectly determined densities are greatly magnified in the predicted pressures which can be too large by factors of over seven. This has major practical implications for the study of radiation damage of materials exposed to $α$ particle bombardment. △ Less

Submitted 13 December, 2022; originally announced December 2022.

A novel measurement of initial-state gluon radiation in hadron collisions using Drell-Yan events

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (375 additional authors not shown)

Abstract: A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γ^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In… ▽ More A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γ^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In a data sample corresponding to an integrated luminosity of 9.4 fb$^{-1}$ collected with the CDF Run II detector, $<p_T^{DY}>$ is measured as a function of the Z/$γ^*$ invariant mass. It is found that these two observables have a dependence, $<p_T^{DY}> = -8 + 2.2 \ln m_{DY}^2$ [GeV/c], where $m_{DY}$ is the value of the Z/$γ^*$ mass measured in units of GeV/$c^2$. This linear dependence is observed for the first time in this analysis. It may be exploited to model the effect of ISR and constrain its impact in other processes. △ Less

Submitted 28 October, 2021; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: 14 pages, 14 figures

Reducing Unitary Coupled Cluster Circuit Depth by Classical Stochastic Amplitude Pre-Screening

Authors: Maria-Andreea Filip, Nathan Fitzpatrick, David Muñoz Ramo, Alex J. W. Thom

Abstract: Unitary Coupled Cluster (UCC) approaches are an appealing route to utilising quantum hardware to perform quantum chemistry calculations, as quantum computers can in principle perform UCC calculations in a polynomially scaling fashion, as compared to the exponential scaling required on classical computers. Current noisy intermediate scale quantum (NISQ) computers are limited by both hardware capaci… ▽ More Unitary Coupled Cluster (UCC) approaches are an appealing route to utilising quantum hardware to perform quantum chemistry calculations, as quantum computers can in principle perform UCC calculations in a polynomially scaling fashion, as compared to the exponential scaling required on classical computers. Current noisy intermediate scale quantum (NISQ) computers are limited by both hardware capacity in number of logical qubits and the noise introduced by the deep circuits required for UCC calculations using the Variational Quantum Eigensolver (VQE) approach. We present a combined classical--quantum approach where a stochastic classical UCC pre-processing step is used to determine the important excitations in the UCC ansatz. The reduced number of selected excitations are then used in a UCC-based VQE calculation. This approach gives a systematically improvable approximation, and we show that significant reductions in quantum resources can be achieved, with simulations on the CH$_2$, N$_2$ and N$_2$H$_2$ molecules giving sub-milliHartree errors. △ Less

Submitted 14 June, 2022; v1 submitted 24 August, 2021; originally announced August 2021.

Comments: 14 pages, 10 figures, 5 tables + 3 pages, 3 figures Supplemental Material

Measurement of the charge asymmetry of electrons from the decays of $W$ bosons produced in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (376 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eν$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eν) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton mome… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eν$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eν) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton momentum carried by the quarks. This paper reports on the measurement of the electron-charge asymmetry using the full data set recorded by the Collider Detector at Fermilab in 2001--2011 and corresponding to 9.1~fb$^{-1}$ of integrated luminosity. The measurement significantly improves the precision of the Tevatron constraints on the parton-distribution functions of the proton. Numerical tables of the measurement are provided. △ Less

Submitted 2 November, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: 27 pages, 25 figures. To be published in PRD

Report number: FERMILAB-PUB-21-293-E

Localised Spin Rotations: A Size-Consistent Approach to Non-Orthogonal Configuration Interaction

Authors: Nicholas Lee, Alex J. W. Thom

Abstract: Current Non-Orthogonal Configuration Interaction (NOCI) methods often use a set of Self-Consistent Field (SCF) states selected based on chemical intuition. However, it may be challenging to track these SCF states across a dissociation profile and the NOCI states recovered may be spin contaminated. In this paper, we propose a method of applying spin rotation on symmetry broken UHF (sb-UHF) states t… ▽ More Current Non-Orthogonal Configuration Interaction (NOCI) methods often use a set of Self-Consistent Field (SCF) states selected based on chemical intuition. However, it may be challenging to track these SCF states across a dissociation profile and the NOCI states recovered may be spin contaminated. In this paper, we propose a method of applying spin rotation on symmetry broken UHF (sb-UHF) states to generate a basis for NOCI. The dissociation of ethene was examined by localising spin rotation on each resulting carbene fragment. We show that this gives a size-consistent description of its dissociation and results in spin-pure states at all geometries. The dissociation was also studied with different orbitals, namely canonical UHF and Absolutely Localised Molecular Orbitals (ALMO). Furthermore, we demonstrate that the method can be used to restore spin symmetry of symmetry broken SCF wavefunctions for molecules of various sizes, marking an improvement over existing NOCI methods. △ Less

Submitted 14 December, 2021; v1 submitted 23 December, 2020; originally announced December 2020.

On Symmetry and the Reality of Holomorphic Hartree--Fock Wavefunctions

Authors: Bang C. Huynh, Alex J. W. Thom

Abstract: The coalescence and disappearance of Hartree--Fock (HF) solutions as the molecular structure varies have been a common source of criticism for the breakdown of the HF approximation to the potential energy surfaces. However, recent developments in holomorphic HF theory show that this disappearing behavior is only a manifestation of the way conventional HF equations prevent solutions from being anal… ▽ More The coalescence and disappearance of Hartree--Fock (HF) solutions as the molecular structure varies have been a common source of criticism for the breakdown of the HF approximation to the potential energy surfaces. However, recent developments in holomorphic HF theory show that this disappearing behavior is only a manifestation of the way conventional HF equations prevent solutions from being analytically continued, but it is unclear what factors govern the existence and the locations of these disappearances. In this work, we explore some of these factors from the perspective of spatial symmetry by introducing a classification for symmetry constraints on electronic-structure calculations. This forms a framework for us to systematically investigate several analytic holomorphic HF solutions of a model $\textrm{[H}_4\textrm{]}^{2+}$ system in STO-3G and demonstrate that, under appropriate conditions, spatial symmetry imposes strict requirements on the reality of certain solutions. The implications for self-consistent-field HF search algorithms are then discussed. Throughout this article, the term reality means the quality of a holomorphic HF solution having real molecular orbitals. △ Less

Submitted 2 March, 2022; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: Main article: 31 pages, 8 tables, 8 figures; best viewed with Adobe Reader, evince, or Okular for correct rendering of colours in the patch plots (mupdf fails horribly at this). Supplementary Materials: 7 pages, 4 tables, 1 mp4 video best viewed with VLC Media Player

A Stochastic Approach to Unitary Coupled Cluster

Authors: Maria-Andreea Filip, Alex J. W. Thom

Abstract: Unitary coupled cluster (UCC), originally developed as a variational alternative to the popular traditional coupled cluster method, has seen a resurgence as a functional form for use on quantum computers. However, the number of excitors present in the ansatz often presents a barrier to implementation on quantum computers. Given the natural sparsity of wavefunctions obtained from Quantum Monte Carl… ▽ More Unitary coupled cluster (UCC), originally developed as a variational alternative to the popular traditional coupled cluster method, has seen a resurgence as a functional form for use on quantum computers. However, the number of excitors present in the ansatz often presents a barrier to implementation on quantum computers. Given the natural sparsity of wavefunctions obtained from Quantum Monte Carlo methods, we consider here a stochastic solution to the UCC problem. Using the Coupled Cluster Monte Carlo framework, we develop cluster selection schemes that capture the structure of the UCC wavefunction, as well as its Trotterized approximation, and use these to solve the corresponding projected equations. Due to the fast convergence of the equations with order in the cluster expansion, this approach scales polynomially with the size of the system. Unlike traditional UCC implementations, our approach naturally produces a non-variational estimator for the energy in the form of the projected energy. For UCCSD in small systems, we find this agrees well with the expectation value of the energy and, in the case of two electrons, with full configuration interaction results. For the larger N$_2$ system, the two estimators diverge, with the projected energy approaching the coupled cluster result, while the expectation value is close to results from traditional UCCSD. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Comments: 11 pages, 7 figures, 1 table

Journal ref: J. Chem. Phys. 153, 214106 (2020)

Theory and Implementation of a Novel Stochastic Approach to Coupled Cluster

Authors: Charles J. C. Scott, Roberto Di Remigio, T. Daniel Crawford, Alex J. W. Thom

Abstract: We present a detailed discussion of our novel diagrammatic coupled cluster Monte Carlo (diagCCMC) [Scott et al. J. Phys. Chem. Lett. 2019, 10, 925]. The diagCCMC algorithm performs an imaginary-time propagation of the similarity-transformed coupled cluster Schrödinger equation. Imaginary-time updates are computed by stochastic sampling of the coupled cluster vector function: each term is evaluated… ▽ More We present a detailed discussion of our novel diagrammatic coupled cluster Monte Carlo (diagCCMC) [Scott et al. J. Phys. Chem. Lett. 2019, 10, 925]. The diagCCMC algorithm performs an imaginary-time propagation of the similarity-transformed coupled cluster Schrödinger equation. Imaginary-time updates are computed by stochastic sampling of the coupled cluster vector function: each term is evaluated as a randomly realised diagram in the connected expansion of the similarity-transformed Hamiltonian. We highlight similarities and differences between deterministic and stochastic linked coupled cluster theory when the latter is re-expressed as a sampling of the diagrammatic expansion, and discuss details of our implementation that allow for a walker-less realisation of the stochastic sampling. Finally, we demonstrate that in the presence of locality, our algorithm can obtain a fixed errorbar per electron while only requiring an asymptotic computational effort that scales quartically with system size, independently of truncation level in coupled cluster theory. The algorithm only requires an asymptotic memory costs scaling linearly, as demonstrated previously. These scaling reductions require no ad hoc modifications to the approach. △ Less

Submitted 21 September, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Holomorphic Density Functional Theory

Authors: Rhiannon A. Zarotiadis, Hugh G. A. Burton, Alex J. W. Thom

Abstract: Self-consistent-field (SCF) approximations formulated using Hartree-Fock (HF) or Kohn-Sham Density Functional Theory (KS-DFT) both have the potential to yield multiple solutions. However, the formal relationship between multiple solutions identified using HF or KS-DFT remains generally unknown. We investigate the connection between multiple SCF solutions for HF or KS-DFT by introducing a parametri… ▽ More Self-consistent-field (SCF) approximations formulated using Hartree-Fock (HF) or Kohn-Sham Density Functional Theory (KS-DFT) both have the potential to yield multiple solutions. However, the formal relationship between multiple solutions identified using HF or KS-DFT remains generally unknown. We investigate the connection between multiple SCF solutions for HF or KS-DFT by introducing a parametrised functional that scales between the two representations. Using the hydrogen molecule and a model of electron transfer, we continuously map multiple solutions from the HF potential to a KS-DFT description. We discover that multiple solutions can coalesce and vanish as the functional changes, forming a direct analogy with the disappearance of real HF solutions along a change in molecular structure. To overcome this disappearance of solutions, we develop a complex-analytic extension of DFT - the "holomorphic DFT" approach - that allows every SCF stationary state to be analytically continued across all molecular structures and exchange-correlation functionals. △ Less

Submitted 6 August, 2020; originally announced August 2020.

Journal ref: J. Chem. Theory Comput. 2020, 16, 12, 7400-7412

Reaching Full Correlation through Nonorthogonal Configuration Interaction: A Second-Order Perturbative Approach

Authors: Hugh G. A. Burton, Alex J. W. Thom

Abstract: Nonorthogonal multireference methods can predict statically correlated adiabatic energies while providing chemical insight through the combination of diabatic reference states. However, reaching quantitative accuracy using nonorthogonal multireference expansions remains a significant challenge. In this work, we present the first rigorous perturbative correction to nonorthogonal configuration inter… ▽ More Nonorthogonal multireference methods can predict statically correlated adiabatic energies while providing chemical insight through the combination of diabatic reference states. However, reaching quantitative accuracy using nonorthogonal multireference expansions remains a significant challenge. In this work, we present the first rigorous perturbative correction to nonorthogonal configuration interaction, allowing the remaining dynamic correlation to be reliably computed. Our second-order "NOCI-PT2" theory exploits a zeroth-order generalised Fock Hamiltonian and builds the first-order interacting space using single and double excitations from each reference determinant. This approach therefore defines the rigorous nonorthogonal extension to conventional multireference perturbation theory. We find that NOCI-PT2 can quantitatively predict multireference potential energy surfaces and provides state-specific ground and excited states for adiabatic avoided crossings. Furthermore, we introduce an explicit imaginary-shift formalism requiring shift values that are an order of magnitude smaller than those used in conventional multireference perturbation theory. △ Less

Submitted 29 July, 2020; v1 submitted 8 May, 2020; originally announced May 2020.

Comments: Accepted manuscript in the Journal of Chemical Theory and Computation. [16 pages, 5 figures]

Accelerating Stochastic Quantum Chemistry

Authors: Verena A. Neufeld, Alex J. W. Thom

Abstract: The convergence of full configuration interaction quantum Monte Carlo (FCIQMC) is accelerated using a quasi-Newton propagation (QN) which can also be applied to coupled cluster Monte Carlo (CCMC). The computational scaling of this optimised propagation is O(1), kee** the additional computational cost to a bare minimum. Its effects are investigated deterministically and stochastically on a model… ▽ More The convergence of full configuration interaction quantum Monte Carlo (FCIQMC) is accelerated using a quasi-Newton propagation (QN) which can also be applied to coupled cluster Monte Carlo (CCMC). The computational scaling of this optimised propagation is O(1), kee** the additional computational cost to a bare minimum. Its effects are investigated deterministically and stochastically on a model system, the uniform electron gas, with Hilbert space size up to $10^{40}$ and shown to accelerate convergence of the instantaneous projected energy by over an order of magnitude in the FCIQMC test case. Its capabilities are then demonstrated with FCIQMC on an archetypical quantum chemistry problem, the chromium dimer, in an all-electron basis set with Hilbert space size of about $10^{22}$ yielding highly accurate FCI energies. △ Less

Submitted 11 October, 2019; originally announced October 2019.

Comments: After publication, the link to the research data will be published. For now, email the authors for access to the research data

Journal ref: J. Chem. Theory Comput. 2020, 16, 3, 1503-1510

Symmetry in Multiple Self-Consistent-Field Solutions of Transition-Metal Complexes

Authors: Bang C. Huynh, Alex J. W. Thom

Abstract: We use a method based on metadynamics to locate multiple low-energy Unrestricted Hartree--Fock (UHF) self-consistent-field (SCF) solutions of two model octahedral $d^1$ and $d^2$ transition-metal complexes, $[\mathrm{MF}_6]^{3-} (\mathrm{M} = \mathrm{Ti}, \mathrm{V})$. By giving a group-theoretical definition of symmetry breaking, we classify these solutions in the framework of representation theo… ▽ More We use a method based on metadynamics to locate multiple low-energy Unrestricted Hartree--Fock (UHF) self-consistent-field (SCF) solutions of two model octahedral $d^1$ and $d^2$ transition-metal complexes, $[\mathrm{MF}_6]^{3-} (\mathrm{M} = \mathrm{Ti}, \mathrm{V})$. By giving a group-theoretical definition of symmetry breaking, we classify these solutions in the framework of representation theory and observe that a number of them break spin or spatial symmetry, if not both. These solutions seem unphysical at first, but we show that they can be used as bases for Non-Orthogonal Configuration Interaction (NOCI) to yield multi-determinantal wavefunctions that have the right symmetry to be assigned to electronic terms. Furthermore, by examining the natural orbitals and occupation numbers of these NOCI wavefunctions, we gain insight into the amount of static correlation that they incorporate. We then investigate the behaviors of the most low-lying UHF and NOCI wavefunctions when the octahedral symmetry of the complexes is lowered and deduce that the symmetry-broken UHF solutions must first have their symmetry restored by NOCI before they can describe any vibronic stabilization effects dictated by the Jahn--Teller theorem. △ Less

Submitted 11 December, 2019; v1 submitted 9 September, 2019; originally announced September 2019.

Comments: 46 pages, 10 figures, 1 TOC figure, 9 tables, 1 Supporting Information. Manuscript revised after peer review. Manuscript accepted on 10th December 2019 for publication in Journal of Chemical Theory and Computation

New Technologies for Discovery

Authors: Z. Ahmed, A. Apresyan, M. Artuso, P. Barry, E. Bielejec, F. Blaszczyk, T. Bose, D. Braga, S. A. Charlebois, A. Chatterjee, A. Chavarria, H. -M. Cho, S. Dalla Torre, M. Demarteau, D. Denisov, M. Diefenthaler, A. Dragone, F. Fahim, C. Gee, S. Habib, G. Haller, J. Hogan, B. J. P. Jones, M. Garcia-Sciveres, G. Giacomini , et al. (58 additional authors not shown)

Abstract: For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by hi… ▽ More For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transformational detector development that is coordinated across the national laboratories and with the university community, international partners and other disciplines. While the fundamental science questions addressed by high energy physics have never been more compelling, there is acute awareness of the challenging budgetary and technical constraints when scaling current technologies. Furthermore, many technologies are reaching their sensitivity limit and new approaches need to be developed to overcome the currently irreducible technological challenges. This situation is unfolding against a backdrop of declining funding for instrumentation, both at the national laboratories and in particular at the universities. This trend has to be reversed for the country to continue to play a leadership role in particle physics, especially in this most promising era of imminent new discoveries that could finally break the hugely successful, but limited, Standard Model of fundamental particle interactions. In this challenging environment it is essential that the community invest anew in instrumentation and optimize the use of the available resources to develop new innovative, cost-effective instrumentation, as this is our best hope to successfully accomplish the mission of high energy physics. This report summarizes the current status of instrumentation for high energy physics, the challenges and needs of future experiments and indicates high priority research areas. △ Less

Submitted 10 August, 2019; v1 submitted 31 July, 2019; originally announced August 2019.

Comments: A report of the 2018 DPF Coordinating Panel for Advanced Detectors (CPAD) Community Workshop (101 pages)

A General Approach for Multireference Ground and Excited States using Non-Orthogonal Configuration Interaction

Authors: Hugh G. A. Burton, Alex J. W. Thom

Abstract: A balanced description of ground and excited states is essential for the description of many chemical processes. However, few methods can handle cases where static correlation is present, and often these scale very unfavourably with system size. Recently, multiple Hartree--Fock (HF) solutions have been proposed as a basis for non-orthogonal configuration interaction (NOCI) to provide multireferenc… ▽ More A balanced description of ground and excited states is essential for the description of many chemical processes. However, few methods can handle cases where static correlation is present, and often these scale very unfavourably with system size. Recently, multiple Hartree--Fock (HF) solutions have been proposed as a basis for non-orthogonal configuration interaction (NOCI) to provide multireference ground and excited state energies, although applications across multiple geometries have been limited by the coalescence of HF solutions. Holomorphic HF (h-HF) theory allows solutions to be analytically continued beyond the Coulson--Fischer points at which they vanish but, until now, this has only been demonstrated for small model systems. In this work, we propose a general protocol for computing NOCI ground and excited state energies using multiple HF solutions. To do so, we outline an active space variation of SCF metadynamics that allows a chemically relevant set of HF states to be identified, and describe how these states can be routinely traced across all molecular geometries by exploiting the topology of h-HF solutions in the complex plane. Finally, we illustrate our approach using the dissociation of the fluorine dimer and the pseudo-Jahn--Teller distortion of cyclobutadiene, demonstrating its applicability for multireference ground and excited states. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Making the most of data: Quantum Monte Carlo Post-Analysis Revisited

Authors: Tom Ichibha, Kenta Hongo, Ryo Maezono, Alex J. W. Thom

Abstract: In quantum Monte Carlo (QMC) methods, energy estimators are calculated as the statistical average of the Markov chain sampling of energy estimator along with an associated statistical error. This error estimation is not straightforward and there are several choices of the error estimation methods. We evaluate the performance of three methods, Straatsma, an autoregressive model, and a blocking anal… ▽ More In quantum Monte Carlo (QMC) methods, energy estimators are calculated as the statistical average of the Markov chain sampling of energy estimator along with an associated statistical error. This error estimation is not straightforward and there are several choices of the error estimation methods. We evaluate the performance of three methods, Straatsma, an autoregressive model, and a blocking analysis based on von Neumann's ratio test for randomness, for the energy time-series given by Diffusion Monte Carlo, Full Configuration Interaction Quantum Monte Carlo and Coupled Cluster Monte Carlo methods. From these analyses we describe a hybrid analysis method which provides reliable error estimates for series of all lengths. Equally important is the estimation of the appropriate start point of the equilibrated phase, and two heuristic schemes are tested, establishing that MSER (mean squared error rule) gives reasonable and constant estimations independent of the length of time-series. △ Less

Submitted 22 April, 2019; originally announced April 2019.

$\mathcal{PT}$-Symmetry in Hartree-Fock Theory

Authors: Hugh G. A. Burton, Alex J. W. Thom, Pierre-François Loos

Abstract: $\mathcal{PT}$-symmetry --- invariance with respect to combined space reflection $\mathcal{P}$ and time reversal $\mathcal{T}$ --- provides a weaker condition than (Dirac) Hermiticity for ensuring a real energy spectrum of a general non-Hermitian Hamiltonian. $\mathcal{PT}… ▽ More $\mathcal{PT}$-symmetry --- invariance with respect to combined space reflection $\mathcal{P}$ and time reversal $\mathcal{T}$ --- provides a weaker condition than (Dirac) Hermiticity for ensuring a real energy spectrum of a general non-Hermitian Hamiltonian. $\mathcal{PT}$-symmetric Hamiltonians therefore form an intermediate class between Hermitian and non-Hermitian Hamiltonians. In this work, we derive the conditions for $\mathcal{PT}$-symmetry in the context of electronic structure theory, and specifically, within the Hartree-Fock (HF) approximation. We show that the HF orbitals are symmetric with respect to the $\mathcal{PT}$ operator \textit{if and only if} the effective Fock Hamiltonian is $\mathcal{PT}$-symmetric, and \textit{vice versa}. By extension, if an optimal self-consistent solution is invariant under $\mathcal{PT}$, then its eigenvalues and corresponding HF energy must be real. Moreover, we demonstrate how one can construct explicitly $\mathcal{PT}$-symmetric Slater determinants by forming $\mathcal{PT}$ doublets (i.e. pairing each occupied orbital with its $\mathcal{PT}$-transformed analogue), allowing $\mathcal{PT}$-symmetry to be conserved throughout the self-consistent process. Finally, considering the \ce{H2} molecule as an illustrative example, we observe $\mathcal{PT}$-symmetry in the HF energy landscape and find that the symmetry-broken unrestricted HF wave functions (i.e. diradical configurations) are $\mathcal{PT}$-symmetric, while the symmetry-broken restricted HF wave functions (i.e. ionic configurations) break $\mathcal{PT}$-symmetry. △ Less

Submitted 21 May, 2019; v1 submitted 20 March, 2019; originally announced March 2019.

Comments: 12 pages, 5 figures

Journal ref: J. Chem. Theory Comput. 15, 4374 (2019)

Search for Higgs-like particles produced in association with bottom quarks in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φ$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified… ▽ More We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φ$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified as initiated by bottom quarks and corresponds to $5.4~\text{fb}^{-1}$ of integrated luminosity. In each event, the invariant mass of the two most energetic jets is studied by looking for deviations from the multijet background, which is modeled using data. No evidence is found for such particle. Exclusion upper limits ranging from 20 to 2 pb are set for the product of production cross sections times branching fraction for hypothetical $φ$ boson with mass between 100 and 300 GeV/$c^2$. These are the most stringent constraints to date. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: submitted to PRD

Report number: FERMILAB-PUB-19-067-PPD

Journal ref: Phys. Rev. D 99, 052001 (2019)

Preconditioning and perturbative estimators in full configuration interaction quantum Monte Carlo

Authors: Nick S. Blunt, Alex J. W. Thom, Charles J. C. Scott

Abstract: We propose the use of preconditioning in FCIQMC which, in combination with perturbative estimators, greatly increases the efficiency of the algorithm. The use of preconditioning allows a time step close to unity to be used (without time-step errors), provided that multiple spawning attempts are made per walker. We show that this approach substantially reduces statistical noise on perturbative corr… ▽ More We propose the use of preconditioning in FCIQMC which, in combination with perturbative estimators, greatly increases the efficiency of the algorithm. The use of preconditioning allows a time step close to unity to be used (without time-step errors), provided that multiple spawning attempts are made per walker. We show that this approach substantially reduces statistical noise on perturbative corrections to initiator error, which improve the accuracy of FCIQMC but which can suffer from significant noise in the original scheme. Therefore, the use of preconditioning and perturbatively-corrected estimators in combination leads to a significantly more efficient algorithm. In addition, a simpler approach to sampling variational and perturbative estimators in FCIQMC is presented, which also allows the variance of the energy to be calculated. These developments are investigated and applied to benzene (30e,108o), an example where accurate treatment is not possible with the original method. △ Less

Submitted 2 April, 2019; v1 submitted 18 January, 2019; originally announced January 2019.

Comments: 15 pages, 7 figures

Diagrammatic Coupled Cluster Monte Carlo

Authors: Charles J. C. Scott, Roberto Di Remigio, T. Daniel Crawford, Alex J. W. Thom

Abstract: We propose a modified coupled cluster Monte Carlo algorithm that stochastically samples connected terms within the truncated Baker--Campbell--Hausdorff expansion of the similarity transformed Hamiltonian by construction of coupled cluster diagrams on the fly. Our new approach -- diagCCMC -- allows propagation to be performed using only the connected components of the similarity-transformed Hamilto… ▽ More We propose a modified coupled cluster Monte Carlo algorithm that stochastically samples connected terms within the truncated Baker--Campbell--Hausdorff expansion of the similarity transformed Hamiltonian by construction of coupled cluster diagrams on the fly. Our new approach -- diagCCMC -- allows propagation to be performed using only the connected components of the similarity-transformed Hamiltonian, greatly reducing the memory cost associated with the stochastic solution of the coupled cluster equations. We show that for perfectly local, noninteracting systems, diagCCMC is able to represent the coupled cluster wavefunction with a memory cost that scales linearly with system size. The favorable memory cost is observed with the only assumption of fixed stochastic granularity and is valid for arbitrary levels of coupled cluster theory. Significant reduction in memory cost is also shown to smoothly appear with dissociation of a finite chain of helium atoms. This approach is also shown not to break down in the presence of strong correlation through the example of a stretched nitrogen molecule. Our novel methodology moves the theoretical basis of coupled cluster Monte Carlo closer to deterministic approaches. △ Less

Submitted 9 February, 2019; v1 submitted 9 January, 2019; originally announced January 2019.

Comments: 31 pages, 6 figures

Multireference Stochastic Coupled Cluster

Authors: Maria-Andreea Filip, Charles J. C. Scott, Alex J. W. Thom

Abstract: We describe a modification of the stochastic coupled cluster algorithm that allows the use of multiple reference determinants. By considering the secondary references as excitations of the primary reference and using them to change the acceptance criteria for selection and spawning, we obtain a simple form of stochastic multireference coupled cluster which preserves the appealing aspects of the si… ▽ More We describe a modification of the stochastic coupled cluster algorithm that allows the use of multiple reference determinants. By considering the secondary references as excitations of the primary reference and using them to change the acceptance criteria for selection and spawning, we obtain a simple form of stochastic multireference coupled cluster which preserves the appealing aspects of the single reference approach. The method is able to successfully describe strongly correlated molecular systems using few references and low cluster truncation levels, showing promise as a tool to tackle strong correlation in more general systems. Moreover, it allows simple and comprehensive control of the included references and excitors thereof, and this flexibility can be taken advantage of to gain insight into some of the inner workings of established electronic structure methods. △ Less

Submitted 21 October, 2020; v1 submitted 5 December, 2018; originally announced December 2018.

Comments: 18 pages, 13 figures. The latest version corrects some typographical errors in the operators on p. 3-4

The HANDE-QMC project: open-source stochastic quantum chemistry from the ground state up

Authors: James S. Spencer, Nick S. Blunt, Seonghoon Choi, Jiri Etrych, Maria-Andreea Filip, W. M. C. Foulkes, Ruth S. T. Franklin, Will J. Handley, Fionn D. Malone, Verena A. Neufeld, Roberto Di Remigio, Thomas W. Rogers, Charles J. C. Scott, James J. Shepherd, William A. Vigor, Joseph Weston, RuQing Xu, Alex J. W. Thom

Abstract: Building on the success of Quantum Monte Carlo techniques such as diffusion Monte Carlo, alternative stochastic approaches to solve electronic structure problems have emerged over the last decade. The full configuration interaction quantum Monte Carlo (FCIQMC) method allows one to systematically approach the exact solution of such problems, for cases where very high accuracy is desired. The introd… ▽ More Building on the success of Quantum Monte Carlo techniques such as diffusion Monte Carlo, alternative stochastic approaches to solve electronic structure problems have emerged over the last decade. The full configuration interaction quantum Monte Carlo (FCIQMC) method allows one to systematically approach the exact solution of such problems, for cases where very high accuracy is desired. The introduction of FCIQMC has subsequently led to the development of coupled cluster Monte Carlo (CCMC) and density matrix quantum Monte Carlo (DMQMC), allowing stochastic sampling of the coupled cluster wave function and the exact thermal density matrix, respectively. In this article we describe the HANDE-QMC code, an open-source implementation of FCIQMC, CCMC and DMQMC, including initiator and semi-stochastic adaptations. We describe our code and demonstrate its use on three example systems; a molecule (nitric oxide), a model solid (the uniform electron gas), and a real solid (diamond). An illustrative tutorial is also included. △ Less

Submitted 4 December, 2018; v1 submitted 28 November, 2018; originally announced November 2018.

Complex Adiabatic Connection: a Hidden Non-Hermitian Path from Ground to Excited States

Authors: Hugh G. A. Burton, Alex J. W. Thom, Pierre-François Loos

Abstract: Processes related to electronically excited states are central in many areas of science, however accurately determining excited-state energies remains a major challenge in theoretical chemistry. Recently, higher energy stationary states of non-linear methods have themselves been proposed as approximations to excited states, although the general understanding of the nature of these solutions remain… ▽ More Processes related to electronically excited states are central in many areas of science, however accurately determining excited-state energies remains a major challenge in theoretical chemistry. Recently, higher energy stationary states of non-linear methods have themselves been proposed as approximations to excited states, although the general understanding of the nature of these solutions remains surprisingly limited. In this Letter, we present an entirely novel approach for exploring and obtaining excited stationary states by exploiting the properties of non-Hermitian Hamiltonians. Our key idea centres on performing analytic continuations of conventional quantum chemistry methods. Considering Hartree--Fock theory as an example, we analytically continue the electron-electron interaction to expose a hidden connectivity of multiple solutions across the complex plane, revealing a close resemblance between Coulson--Fischer points and non-Hermitian degeneracies. Finally, we demonstrate how a ground-state wave function can be morphed naturally into an excited-state wave function by constructing a well-defined complex adiabatic connection. △ Less

Submitted 14 January, 2019; v1 submitted 22 November, 2018; originally announced November 2018.

Comments: 5 pages, 3 figures

Journal ref: J. Chem. Phys. 150, 041103 (2019)

Exciting determinants in Quantum Monte Carlo: Loading the dice with fast, low memory weights

Authors: Verena A. Neufeld, Alex J. W. Thom

Abstract: High-quality excitation generators are crucial to the effectiveness of Coupled cluster Monte Carlo (CCMC) and full configuration interaction Quantum Monte Carlo (FCIQMC) calculations. The heat bath sampling of Holmes et al. [A. A. Holmes, H. J. Changlani, and C. J. Umrigar, J. Chem. Theory Comput. 12, 1561 (2016)] dramatically increases the efficiency of the spawn step of such algorithms but requi… ▽ More High-quality excitation generators are crucial to the effectiveness of Coupled cluster Monte Carlo (CCMC) and full configuration interaction Quantum Monte Carlo (FCIQMC) calculations. The heat bath sampling of Holmes et al. [A. A. Holmes, H. J. Changlani, and C. J. Umrigar, J. Chem. Theory Comput. 12, 1561 (2016)] dramatically increases the efficiency of the spawn step of such algorithms but requires memory storage scaling quartically with system size which can be prohibitive for large systems. Alavi et al. [S. D. Smart, G. H. Booth, and A. Alavi, unpublished] then approximated these weights with weights based on Cauchy--Schwarz-like inequalities calculated on-the-fly. While reducing the memory cost, this algorithm scales linearly in system size computationally. We combine both these ideas with the single reference nature of many systems, and introduce a spawn-sampling algorithm that has low memory requirements (quadratic in basis set size) compared to the heat bath algorithm and only scales either independently of system size (CCMC) or linearly in the number of electrons (FCIQMC). On small water chains with localized orbitals, we show that it is equally efficient as the other excitation generators. As the system gets larger, it converges faster than the on-the-fly weight algorithm, while having a much more favourable memory scaling than the heat bath algorithm. △ Less

Submitted 16 August, 2018; v1 submitted 15 August, 2018; originally announced August 2018.

Comments: After publication, the link to the research data will be published. For now, email the authors for access to the research data. Small mistakes in the text fixed in v2

Journal ref: J. Chem. Theory Comput. 2019, 15, 1, 127-140

Field-Programmable Gate Arrays and Quantum Monte Carlo: Power Efficient Co-processing for Scalable High-Performance Computing

Authors: Salvatore Cardamone, Jonathan R. Kimmitt, Hugh G. A. Burton, Alex J. W. Thom

Abstract: Massively parallel architectures offer the potential to significantly accelerate an application relative to their serial counterparts. However, not all applications exhibit an adequate level of data and/or task parallelism to exploit such platforms. Furthermore, the power consumption associated with these forms of computation renders "scaling out" for exascale levels of performance incompatible wi… ▽ More Massively parallel architectures offer the potential to significantly accelerate an application relative to their serial counterparts. However, not all applications exhibit an adequate level of data and/or task parallelism to exploit such platforms. Furthermore, the power consumption associated with these forms of computation renders "scaling out" for exascale levels of performance incompatible with modern sustainable energy policies. In this work, we investigate the potential for field-programmable gate arrays (FPGAs) to feature in future exascale platforms, and their capacity to improve performance per unit power measurements for the purposes of scientific computing. We have focussed our efforts on Variational Monte Carlo, and report on the benefits of co-processing with an FPGA relative to a purely multicore system. △ Less

Submitted 7 August, 2018; originally announced August 2018.

Measurement of the differential cross sections for $W$-boson production in association with jets in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron… ▽ More This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron and muon. The production cross sections are measured for each leptonic decay mode and combined after testing that the ratio of the $W(\rightarrow μν)+$jets cross section to the $W(\rightarrow eν)+$jets cross section agrees with the hypothesis of $e$-$μ$ lepton universality. The combination of measured cross sections, differential in the inclusive jet multiplicity ($W+\geqslant N$ jets with $N=1,\,2,\,3, \textrm{or }4$) and in the transverse energy of the leading jet, are compared with theoretical predictions. △ Less

Submitted 7 August, 2018; originally announced August 2018.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-18-371-E

Journal ref: Phys. Rev. D 98, 112005 (2018)

Modelling Electron Transfers Using Quasidiabatic Hartree-Fock States

Authors: Kristopher T. Jensen, Raz L. Benson, Salvatore Cardamone, Alex J. W. Thom

Abstract: Electron transfer processes are ubiquitous in chemistry and of great importance in many systems of biological and commercial interest. The ab-initio description of these processes remains a challenge in theoretical chemistry, partly due to the high scaling of many post-Hartree--Fock computational methods. This poses a problem for systems of interest that are not easily investigated experimentally.… ▽ More Electron transfer processes are ubiquitous in chemistry and of great importance in many systems of biological and commercial interest. The ab-initio description of these processes remains a challenge in theoretical chemistry, partly due to the high scaling of many post-Hartree--Fock computational methods. This poses a problem for systems of interest that are not easily investigated experimentally. We show that readily available Hartree--Fock solutions can be used as a quasidiabatic basis to understand electron transfer reactions in a Marcus framework. Non-orthogonal configuration interaction calculations can be used to quantify interactions between the resulting electronic states, and to investigate the adiabatic electron transfer process. When applied to a titanium-alizarin complex used as a model of a Grätzel-type solar cell, this approach yields a correct description of the electron transfer and provides information about the electronic states involved in the process. △ Less

Submitted 13 July, 2018; originally announced July 2018.

Large Scale Parallelization in Stochastic Coupled Cluster

Authors: James S. Spencer, Verena A. Neufeld, William A. Vigor, Ruth S. T. Franklin, Alex J. W. Thom

Abstract: Coupled cluster theory is a vital cornerstone of electronic structure theory and is being applied to ever-larger systems. Stochastic approaches to quantum chemistry have grown in importance and offer compelling advantages over traditional deterministic algorithms in terms of computational demands, theoretical flexibility or lower scaling with system size. We present a highly parallelizable algorit… ▽ More Coupled cluster theory is a vital cornerstone of electronic structure theory and is being applied to ever-larger systems. Stochastic approaches to quantum chemistry have grown in importance and offer compelling advantages over traditional deterministic algorithms in terms of computational demands, theoretical flexibility or lower scaling with system size. We present a highly parallelizable algorithm of the coupled cluster Monte Carlo method involving sampling of clusters of excitors over multiple time steps. The behaviour of the algorithm is investigated on the uniform electron gas and the water dimer at CCSD, CCSDT and CCSDTQ levels. We also describe two improvements to the original sampling algorithm, full non-composite and multi-spawn sampling. A stochastic approach to coupled cluster results in an efficient and scalable implementation at arbitrary truncation levels in the coupled cluster expansion. △ Less

Submitted 12 December, 2018; v1 submitted 10 July, 2018; originally announced July 2018.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article appeared in "Spencer, J.S. et al., J. Chem. Phys. 149, 204103 (2018)", and may be found at https://doi.org/10.1063/1.5047420. Data and further info can be accessed at https://doi.org/10.17863/CAM.30359

Journal ref: J. Chem. Phys. 149, 204103 (2018)

Search for standard-model Z and Higgs bosons decaying into a bottom-antibottom quark pair in proton-antiproton collisions at 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an… ▽ More The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an integrated luminosity of $5.4~\rm{fb}^{-1}$, is used to measure the $Z$-boson production cross section times branching ratio into $b\bar{b}$. The number of $Z\rightarrow b\bar{b}$ events is determined by fitting the dijet-mass distribution while constraining the dominant $b$-jet background, originating from QCD multijet events, with data. The result, $σ(p\bar{p} \rightarrow Z) \times \mathcal{B}(Z \rightarrow b\bar{b})= 1.11\pm 0.08(\text{stat}) \pm 0.14(\text{syst})~\text{nb}$, is the most precise measurement of this process, and is consistent with the standard-model prediction. The data set is also used to search for Higgs-boson production. No significant signal is expected in our data and the first upper limit on the cross section for the inclusive $p\bar p \rightarrow H\rightarrow b\bar b$ process at $\sqrt{s}=$1.96 TeV is set, corresponding to 33 times the expected standard-model cross section, or $σ= 40.6$ pb, at the 95\% confidence level. △ Less

Submitted 18 October, 2018; v1 submitted 3 July, 2018; originally announced July 2018.

Report number: FERMILAB-PUB-18-307-E-PPD

Journal ref: Phys. Rev. D 98, 072002 (2018)

Holomorphic Hartree-Fock Theory: The Nature of Two-Electron Problems

Authors: Hugh G. A. Burton, Mark Gross, Alex J. W. Thom

Abstract: We explore the existence and behaviour of holomorphic restricted Hartree-Fock (h-RHF) solutions for two-electron problems. Through algebraic geometry, the exact number of solutions with $n$ basis functions is rigorously identified as $\frac{1}{2}(3^n - 1)$, proving that states must exist for all molecular geometries. A detailed study on the h-RHF states of HZ (STO-3G) then demonstrates both the co… ▽ More We explore the existence and behaviour of holomorphic restricted Hartree-Fock (h-RHF) solutions for two-electron problems. Through algebraic geometry, the exact number of solutions with $n$ basis functions is rigorously identified as $\frac{1}{2}(3^n - 1)$, proving that states must exist for all molecular geometries. A detailed study on the h-RHF states of HZ (STO-3G) then demonstrates both the conservation of holomorphic solutions as geometry or atomic charges are varied and the emergence of complex h-RHF solutions at coalescence points. Using catastrophe theory, the nature of these coalescence points is described, highlighting the influence of molecular symmetry. The h-RHF states of HHeH$^{2+}$ and HHeH (STO-3G) are then compared, illustrating the isomorphism between systems with two electrons and two electron holes. Finally, we explore the h-RHF states of ethene (STO-3G) by considering the $π$ electrons as a two-electron problem, and employ NOCI to identify a crossing of the lowest energy singlet and triplet states at the perpendicular geometry. △ Less

Submitted 12 January, 2018; originally announced January 2018.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Journal of Chemical Theory and Computation, copyright © American Chemical Society after peer review. To access the final edited and published work see http://pubs.acs.org/journal/jctcce

A search for the exotic meson $X(5568)$ with the Collider Detector at Fermilab

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for the exotic meson $X(5568)$ decaying into the $B^0_s π^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the… ▽ More A search for the exotic meson $X(5568)$ decaying into the $B^0_s π^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the $X(5568) \rightarrow B^0_s \, π^{\pm}$ process. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Comments: 13 pages, 3 figures

Report number: FERMILAB-FN-1048-E

Journal ref: Phys. Rev. Lett. 120, 202006 (2018)

A study of the dense Uniform Electron Gas with high orders of Coupled Cluster

Authors: Verena A. Neufeld, Alex J. W. Thom

Abstract: We investigate the accuracies of different coupled cluster levels in a finite model solid, the 14 electron spin-non-polarised uniform electron gas. For densities between $\mathrm{r}_\mathrm{s}$ = 0.5 $\mathrm{a}_\mathrm{0}$ and $\mathrm{r}_\mathrm{s}$ = 5 $\mathrm{a}_\mathrm{0}$, we calculate ground state correlation energies with stochastic coupled cluster ranging from coupled cluster singles and… ▽ More We investigate the accuracies of different coupled cluster levels in a finite model solid, the 14 electron spin-non-polarised uniform electron gas. For densities between $\mathrm{r}_\mathrm{s}$ = 0.5 $\mathrm{a}_\mathrm{0}$ and $\mathrm{r}_\mathrm{s}$ = 5 $\mathrm{a}_\mathrm{0}$, we calculate ground state correlation energies with stochastic coupled cluster ranging from coupled cluster singles and doubles (CCSD) to coupled cluster including all excitations up to quintuples (CCSDTQ5). We find the need to add triple excitations for an accuracy of 0.01eV/electron beyond $\mathrm{r}_\mathrm{s}$ = 0.5 $\mathrm{a}_\mathrm{0}$. Quadruple excitations start being significant past $\mathrm{r}_\mathrm{s}$ = 3 $\mathrm{a}_\mathrm{0}$ . At $\mathrm{r}_\mathrm{s}$ = 5 $\mathrm{a}_\mathrm{0}$, CCSD gives a correlation energy with a 16% error and CCSDT is in error by 2% compared to the CCSDTQ5 result. CCSDTQ5 gives an energy in agreement with full configuration interaction quantum Monte Carlo results. △ Less

Submitted 27 March, 2018; v1 submitted 29 June, 2017; originally announced June 2017.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article appeared in "Neufeld, V.A. and Thom, A.J.W., J. Chem. Phys. 147, 194105 (2017)" and may be found at https://aip.scitation.org/doi/abs/10.1063/1.5003794. The data and further information can be accessed at https://doi.org/10.17863/CAM.14336

Journal ref: J. Chem. Phys. 147, 194105 (2017)

Stochastic Coupled Cluster Theory: Efficient Sampling of the Coupled Cluster Expansion

Authors: Charles J. C. Scott, Alex J. W. Thom

Abstract: We consider the sampling of the coupled cluster expansion within stochastic coupled cluster theory. Observing the limitations of previous approaches due to the inherently non-linear behaviour of a coupled cluster wavefunction representation we propose new approaches based upon an intuitive, well-defined condition for sampling weights and on sampling the expansion in cluster operators of different… ▽ More We consider the sampling of the coupled cluster expansion within stochastic coupled cluster theory. Observing the limitations of previous approaches due to the inherently non-linear behaviour of a coupled cluster wavefunction representation we propose new approaches based upon an intuitive, well-defined condition for sampling weights and on sampling the expansion in cluster operators of different excitation levels. We term these modifications even and truncated selection respectively. Utilising both approaches demonstrates dramatically improved calculation stability as well as reduced computational and memory costs. These modifications are particularly effective at higher truncation levels owing to the large number of terms within the cluster expansion that can be neglected, as demonstrated by the reduction of the number of terms to be sampled at the level of CCSDT by 77% and at CCSDTQ56 by 98%. △ Less

Submitted 13 September, 2017; v1 submitted 21 June, 2017; originally announced June 2017.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article has been accepted by the Journal of Chemical Physics. After it is published, it will be found at http://aip.scitation.org/journal/jcp/

Journal ref: J. Chem. Phys. 147, 124105 (2017)

Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector

Authors: M. Dragicevic, M. Friedl, J. Hrubec, H. Steininger, A. Gädda, J. Härkönen, T. Lampén, P. Luukka, T. Peltola, E. Tuominen, E. Tuovinen, A. Winkler, P. Eerola, T. Tuuva, G. Baulieu, G. Boudoul, L. Caponetto, C. Combaret, D. Contardo, T. Dupasquier, G. Gallbit, N. Lumb, L. Mirabito, S. Perries, M. Vander Donckt , et al. (462 additional authors not shown)

Abstract: A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator… ▽ More A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found. △ Less

Submitted 1 June, 2017; originally announced June 2017.

Report number: CMS-NOTE-2017-002

Measurement of the inclusive-isolated prompt-photon cross section in $p\bar{p}$ collisions using the full CDF data set

Authors: CDF Collaboration, T. Aaltonen, M. G. Albrow, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (374 additional authors not shown)

Abstract: A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a functio… ▽ More A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a function of photon transverse energy, $E_T^γ$, in the range 30$ < E_T^γ <$500GeV and in the pseudorapidity region $|η^γ|<$1.0. The results are compared with predictions from parton-shower Monte Carlo models at leading order in quantum chromodynamics (QCD) and from next-to-leading order perturbative QCD calculations. The latter show good agreement with the measured cross section. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Comments: submitted to Phys. Rev. D - RC

Report number: FERMILAB-PUB-17-053-PPD

Journal ref: Phys. Rev. D 96, 092003 (2017)