-
Noise-dependent bias in quantitative STEM-EMCD experiments revealed by bootstrap**
Authors:
Hasan Ali,
Jan Rusz,
Daniel E. Bürgler,
Roman Adam,
Claus M. Schneider,
Cheuk Wai Tai,
Thomas Thersleff
Abstract:
Electron magnetic circular dichroism (EMCD) is a powerful technique for estimating element-specific magnetic moments of materials on nanoscale with the potential to reach atomic resolution in transmission electron microscopes. However, the fundamentally weak EMCD signal strength complicates quantification of magnetic moments, as this requires very high precision, especially in the denominator of t…
▽ More
Electron magnetic circular dichroism (EMCD) is a powerful technique for estimating element-specific magnetic moments of materials on nanoscale with the potential to reach atomic resolution in transmission electron microscopes. However, the fundamentally weak EMCD signal strength complicates quantification of magnetic moments, as this requires very high precision, especially in the denominator of the sum rules. Here, we employ a statistical resampling technique known as bootstrap** to an experimental EMCD dataset to produce an empirical estimate of the noise dependent error distribution resulting from application of EMCD sum rules to bcc iron in a 3 beam orientation. We observe clear experimental evidence that noisy EMCD signals preferentially bias the estimation of magnetic moments, further supporting this with error distributions produced by Monte-Carlo simulations. Finally, we propose guidelines for the recognition and minimization of this bias in the estimation of magnetic moments.
△ Less
Submitted 19 September, 2023; v1 submitted 27 June, 2023;
originally announced June 2023.
-
Single scan STEM-EMCD in 3-beam orientation using a quadruple aperture
Authors:
Hasan Ali,
Sharath Kumar Manjeshwar Sathyanath,
Cheuk-Wai Tai,
Jan Rusz,
Toni Uusimaki,
Björgvin Hjörvarsson,
Thomas Thersleff,
Klaus Leifer
Abstract:
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly dep…
▽ More
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while kee** all the experimental conditions same. This is a non-trivial task as there is a high chance of morphological and chemical modification as well as non-systematic local orientation variations of the crystal between the different scans due to beam damage, contamination and spatial drift. In this work, we employ a custom-made quadruple aperture to acquire the four EELS spectra needed for the EMCD analysis in a single electron beam scan, thus removing the above-mentioned complexities. We demonstrate a quantitative EMCD result for a beam convergence angle corresponding to sub-nm probe size and compare the EMCD results for different detector geometries.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Exploring the nanoscale origin of performance enhancement in Li$_{1.1}$Ni$_{0.35}$Mn$_{0.55}$O$_2$ batteries due to chemical do**
Authors:
Thomas Thersleff,
Jordi Jacas Biendicho,
Kunkanadu Prakasha,
Elias Martinez Moreno,
Leif Olav Jøsang,
Jekabs Grins,
Aleksander Jaworski,
Gunnar Svensson
Abstract:
Despite significant potential as energy storage materials for electric vehicles due to their combination of high energy density per unit cost and reduced environmental and ethical concerns, Co-free lithium ion batteries based off layered Mn oxides presently lack the longevity and stability of their Co-containing counterparts. Here, we demonstrate a reduction in this performance gap via chemical do…
▽ More
Despite significant potential as energy storage materials for electric vehicles due to their combination of high energy density per unit cost and reduced environmental and ethical concerns, Co-free lithium ion batteries based off layered Mn oxides presently lack the longevity and stability of their Co-containing counterparts. Here, we demonstrate a reduction in this performance gap via chemical do**, with Li$_{1.1}$Ni$_{0.35}$Mn$_{0.55}$O$_2$ achieving an initial discharge capacity of 159 mAhg$^{-1}$ at C/3 rate and a corresponding capacity retention of 94.3% after 150 cycles. We subsequently explore the nanoscale origins of this improvement through a combination of advanced diffraction, spectroscopy, and electron microscopy techniques, finding that optimized do** profiles lead to an improved structural and chemical compatibility between the two constituent sub-phases that characterize the layered Mn oxide system, resulting in the formation of unobstructed lithium ion pathways between them. We also directly observe a structural stabilization effect of the host compound near the surface using aberration corrected scanning transmission electron microscopy and integrated differential phase contrast imaging.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Feature-specific correlation of structural, optical, and chemical properties in the transmission electron microscope with hypermodal data fusion
Authors:
Thomas Thersleff,
Cheuk-Wai Tai
Abstract:
Modern TEM instrumentation can probe a wide range of structural, optical, and chemical properties with unprecedented resolution. However, each of these properties must be recorded in independent datasets using different detector modes with no unifying framework currently available for quantitatively map** their relationships onto chemically distinct features, particularly in complex morphologies…
▽ More
Modern TEM instrumentation can probe a wide range of structural, optical, and chemical properties with unprecedented resolution. However, each of these properties must be recorded in independent datasets using different detector modes with no unifying framework currently available for quantitatively map** their relationships onto chemically distinct features, particularly in complex morphologies. Here, we tackle this challenge by proposing a data acquisition and analysis workflow called "hypermodal data fusion," describing how to directly couple an arbitrary number of highly disparate detector modes including spectroscopy and scanning diffraction and jointly analyze them for correlations. We demonstrate this concept on a random collection of anatase and rutile nanoparticles, first detailing how to use core-loss EELS to unmix the different polymorphs despite three-dimensional overlap along the beam direction and then showing how this can be used to extract polymorph-specific composition, bandgaps, and crystal structure. We conclude with a discussion on the applicability of this workflow for a broad range of materials systems.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
InsteaDMatic: Towards cross-platform automated continuous rotation electron diffraction
Authors:
Maria Roslova,
Stef Smeets,
Bin Wang,
Thomas Thersleff,
Hongyi Xu,
Xiaodong Zou
Abstract:
A DigitalMicrograph script InsteaDMatic has been developed to facilitate rapid automated continuous rotation electron diffraction (cRED) data acquisition. The script coordinates microscope functions, such as stage rotation, camera functions relevant for data collection, and stores the experiment metadata. The script is compatible with any microscope that can be controlled by DigitalMicrograph and…
▽ More
A DigitalMicrograph script InsteaDMatic has been developed to facilitate rapid automated continuous rotation electron diffraction (cRED) data acquisition. The script coordinates microscope functions, such as stage rotation, camera functions relevant for data collection, and stores the experiment metadata. The script is compatible with any microscope that can be controlled by DigitalMicrograph and has been tested on both JEOL and Thermo Fisher Scientific microscopes. A proof-of-concept has been performed through employing InsteaDMatic for data collection and structure determination of a ZSM-5 zeolite. The influence of illumination settings and electron dose rate on the quality of diffraction data, unit cell determination and structure solution has been investigated in order to optimize the data acquisition procedure.
△ Less
Submitted 28 April, 2020; v1 submitted 21 November, 2019;
originally announced November 2019.
-
Single-pass STEM-EMCD on a zone axis using a patterned aperture: progress in experimental and data treatment methods
Authors:
Thomas Thersleff,
Linus Schönström,
Cheuk-Wai Tai,
Roman Adam,
Daniel E. Bürgler,
Claus M. Schneider,
Shunsuke Muto,
Ján Rusz
Abstract:
Measuring magnetic moments in ferromagnetic materials with atomic column resolution is theoretically possible using the electron magnetic circular dichroism (EMCD) technique in a (scanning) transmission electron microscope ((S)TEM). However, experimental and data processing hurdles currently hamper the realization of this goal. Experimentally, the sample must be tilted to a zone-axis orientation,…
▽ More
Measuring magnetic moments in ferromagnetic materials with atomic column resolution is theoretically possible using the electron magnetic circular dichroism (EMCD) technique in a (scanning) transmission electron microscope ((S)TEM). However, experimental and data processing hurdles currently hamper the realization of this goal. Experimentally, the sample must be tilted to a zone-axis orientation, yielding a complex distribution of magnetic scattering intensity, and the same sample region must be scanned multiple times with sub-atomic spatial registration necessary at each pass. Furthermore, the weak nature of the EMCD signal requires advanced data processing techniques to reliably detect and quantify the result. In this manuscript, we detail our experimental and data processing progress towards achieving single-pass zone-axis EMCD using a patterned aperture. First, we provide a comprehensive data acquisition and analysis strategy for this and other EMCD experiments that should scale down to atomic resolution experiments. Second, we demonstrate that, at low spatial resolution, promising EMCD candidate signals can be extracted, and that these are sensitive to both crystallographic orientation and momentum transfer.
△ Less
Submitted 24 August, 2019;
originally announced August 2019.
-
Proposal for measuring magnetism with patterned apertures
Authors:
Devendra Negi,
Jakob Spiegelberg,
Shunsuke Muto,
Thomas Thersleff,
Masahiro Ohtsuka,
Linus Schönström,
Kazuyoshi Tatsumi,
Jaán Rusz
Abstract:
We propose a magnetic measurement method utilizing a patterned post-sample aperture in a transmission electron microscope. While utilizing electron magnetic circular dichroism, the method circumvents previous needs to shape the electron probe to an electron vortex beam or astigmatic beam. The method can be implemented in standard scanning transmission electron microscopes by replacing the spectrom…
▽ More
We propose a magnetic measurement method utilizing a patterned post-sample aperture in a transmission electron microscope. While utilizing electron magnetic circular dichroism, the method circumvents previous needs to shape the electron probe to an electron vortex beam or astigmatic beam. The method can be implemented in standard scanning transmission electron microscopes by replacing the spectrometer entrance aperture with a specially shaped aperture, hereafter called ventilator aperture. The proposed setup is expected to work across the whole range of beam sizes -- from wide parallel beams down to atomic resolution magnetic spectrum imaging.
△ Less
Submitted 13 October, 2018;
originally announced October 2018.
-
Quantitative analysis of magnetic spin and orbital moments from an oxidized iron (1 1 0) surface using electron magnetic circular dichroism
Authors:
Thomas Thersleff,
Jan Rusz,
Stefano Rubino,
Björgvin Hjörvarsson,
Yasuo Ito,
Nestor Zaluzec,
Klaus Leifer
Abstract:
Understanding the ramifications of reduced crystalline symmetry on magnetic behavior is a critical step in improving our understanding of nanoscale and interfacial magnetism. However, investigations of such effects are often controversial largely due to the challenges inherent in directly correlating nanoscale stoichiometry and structure to magnetic behavior. Here, we describe how to use Transmiss…
▽ More
Understanding the ramifications of reduced crystalline symmetry on magnetic behavior is a critical step in improving our understanding of nanoscale and interfacial magnetism. However, investigations of such effects are often controversial largely due to the challenges inherent in directly correlating nanoscale stoichiometry and structure to magnetic behavior. Here, we describe how to use Transmission Electron Microscope (TEM) to obtain Electron Magnetic Circular Dichroism (EMCD) signals as a function of scattering angle to locally probe the magnetic behavior of thin oxide layers grown on an Fe (1 1 0) surface. Experiments and simulations both reveal a strong dependence of the magnetic orbital to spin ratio on its scattering vector in reciprocal space. We exploit this variation to extract the magnetic properties of the oxide cladding layer, showing that it locally may exhibit an enhanced orbital to spin moment ratio. This finding is supported here by both spatially and angularly resolved EMCD measurements, opening up the way for compelling investigations into how magnetic properties are affected by nanoscale features.
△ Less
Submitted 17 July, 2015; v1 submitted 26 March, 2015;
originally announced March 2015.
-
The Effect of 45° Grain Boundaries and associated Fe particles on Jc and resistivity in Ba(Fe0.9Co0.1)2As2 Thin Films
Authors:
J. Hänisch,
K. Iida,
F. Kurth,
T. Thersleff,
S. Trommler,
E. Reich,
R. Hühne,
L. Schultz,
B. Holzapfel
Abstract:
The anisotropy of the critical current density Jc depends in general on both the properties of the flux lines (such as line tension, coherence length and penetration depth) and the properties of the defects (such as density, shape, orientation etc.). Whereas the Jc anisotropy in microstructurally clean films can be scaled to an effective magnetic field containing the Ginzburg-Landau anisotropy ter…
▽ More
The anisotropy of the critical current density Jc depends in general on both the properties of the flux lines (such as line tension, coherence length and penetration depth) and the properties of the defects (such as density, shape, orientation etc.). Whereas the Jc anisotropy in microstructurally clean films can be scaled to an effective magnetic field containing the Ginzburg-Landau anisotropy term, it is in general not possible (or only in a limited field range) for samples containing extended defects. Here, the Jc anisotropy of a Co-doped BaFe2As2 sample with 45° [001] tilt grain boundaries (GBs), i.e. grain boundaries created by 45° in-plane rotated grains, as well as extended Fe particles is investigated. This microstructure leads to c-axis correlated pinning, both due to the GBs and the Fe particles and manifests in a c-axis peak in the Jc anisotropy at low magnetic fields and a deviation from the anisotropic Ginzburg-Landau scaling at higher fields. Strong pinning at ellipsoidal extended defects, i.e. the Fe particles, is discussed, and the full Jc anisotropy is fitted successfully with the vortex path model. The results are compared to a sample without GBs and Fe particles. 45° GBs seem to be good pinning centers rather than detrimental to current flow.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
-
Lessons from Oxypnictide Thin Films
Authors:
Silvia Haindl,
Martin Kidszun,
Franziska Onken,
Alexander Mietke,
Thomas Thersleff
Abstract:
First experiments on the growth of oxypnictide F-doped LaFeAsO thin films indicated an incomplete normal-to-superconducting transition and offered a work programme challenging to overcome possible difficulties in their fabrication. In this regard the possibility of an all in-situ epitaxial growth appeared to be a matter of time and growth parameters. The following review clarifies that F-doped oxy…
▽ More
First experiments on the growth of oxypnictide F-doped LaFeAsO thin films indicated an incomplete normal-to-superconducting transition and offered a work programme challenging to overcome possible difficulties in their fabrication. In this regard the possibility of an all in-situ epitaxial growth appeared to be a matter of time and growth parameters. The following review clarifies that F-doped oxypnictide thin films are extremely difficult to grow by in-situ PLD due to the formation of very stable impurity phases such as oxyfluorides (LaOF) and oxides (La2O3) and the loss of stoichiometry possibly due to incongruent evaporation of the target or re-evaporation of volatile elements at the substrate surface. However, the review also demonstrates that the employed two-step fabrication process for oxypnictide thin films has been successfully applied in the preparation of clean polycrystalline as well as of epitaxial thin films. Fundamental investigations on the upper critical field, its temperature dependence and its anisotropy contributed to an understanding of multiband superconductivity in oxypnictides.
△ Less
Submitted 17 December, 2012;
originally announced December 2012.
-
Modulated Martensite: Why it forms and why it deforms easily
Authors:
Stefan Kaufmann,
Robert Niemann,
Thomas Thersleff,
Ulrich K. Rößler,
Oleg Heczko,
Jörg Buschbeck,
Bernhard Holzapfel,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic phases. We outline the origin of modulated phases, their connection with tetragonal martensite and consequences for their functional properties by analysing the m…
▽ More
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic phases. We outline the origin of modulated phases, their connection with tetragonal martensite and consequences for their functional properties by analysing the martensitic microstructure of epitaxial Ni-Mn-Ga films from the atomic to macroscale. Geometrical constraints at an austenite-martensite phase boundary act down to the atomic scale. Hence a martensitic microstructure of nanotwinned tetragonal martensite can form. Coarsening of twin variants can reduce twin boundary energy, a process we could follow from the atomic to the millimetre scale. Coarsening is a fractal process, proceeding in discrete steps by doubling twin periodicity. The collective defect energy results in a substantial hysteresis, which allows retaining modulated martensite as a metastable phase at room temperature. In this metastable state elastic energy is released by the formation of a 'twins within twins' microstructure which can be observed from the nanometre to millimetre scale. This hierarchical twinning results in mesoscopic twin boundaries which are diffuse, in contrast to the common atomically sharp twin boundaries of tetragonal martensite. We suggest that observed extraordinarily high mobility of such mesoscopic twin boundaries originates from their diffuse nature which renders pinning by atomistic point defects ineffective.
△ Less
Submitted 19 April, 2011; v1 submitted 17 December, 2010;
originally announced December 2010.
-
Jc Scaling and Anisotropies in Co-doped Ba-122 thin films
Authors:
Jens Hänisch,
Kazumasa Iida,
Silvia Haindl,
Fritz Kurth,
Alexander Kauffmann,
Martin Kidszun,
Thomas Thersleff,
Jens Freudenberger,
Ludwig Schultz,
Bernhard Holzapfel
Abstract:
We have successfully grown epitaxial, superconducting films of Ba(Fe1-xCox)2As2 (Ba-122)with x ~ 0.1. The films grow without observable correlated defects parallel to the c-axis, as confirmed by TEM. This is also reflected in the absence of a caxis peak in Jc(θ). In contrast to cuprate high-Tc superconductors such as YBa2Cu3O7-d or even Bi2Sr2Ca2Cu3O10-d, the pnictides show a rather low anisotropi…
▽ More
We have successfully grown epitaxial, superconducting films of Ba(Fe1-xCox)2As2 (Ba-122)with x ~ 0.1. The films grow without observable correlated defects parallel to the c-axis, as confirmed by TEM. This is also reflected in the absence of a caxis peak in Jc(θ). In contrast to cuprate high-Tc superconductors such as YBa2Cu3O7-d or even Bi2Sr2Ca2Cu3O10-d, the pnictides show a rather low anisotropic behavior in their Jc(θ) behavior as well as in their upper critical fields, Hc2. As a multiband superconductor, Ba-122 exhibits a temperature dependent electronic mass anisotropy.
△ Less
Submitted 7 December, 2010;
originally announced December 2010.
-
Influenced of Fe buffer thickness on the crystalline quality and the transport properties of Fe/Ba(Fe1-xCox)2As2 bilayers
Authors:
K. Iida,
S. Haindl,
T. Thersleff,
J. Haenishc,
F. Kurth,
M. Kidszun,
R. Huehne,
I. Moench,
L. Schultz,
B. Holzapfel,
R. Heller
Abstract:
The implementation of an Fe buffer layer is a promising way to obtain epitaxial growth of Co-doped BaFe2As2 (Ba-122). However, the crystalline quality and the superconducting properties of Co-doped Ba-122 are influenced by the Fe buffer layer thickness, dFe. The well-textured growth of the Fe/Ba-122 bilayer with dFe = 15 nm results in a high Jc of 0.45 MAcm$^{-2}$ at 12 K in self-field, whereas a…
▽ More
The implementation of an Fe buffer layer is a promising way to obtain epitaxial growth of Co-doped BaFe2As2 (Ba-122). However, the crystalline quality and the superconducting properties of Co-doped Ba-122 are influenced by the Fe buffer layer thickness, dFe. The well-textured growth of the Fe/Ba-122 bilayer with dFe = 15 nm results in a high Jc of 0.45 MAcm$^{-2}$ at 12 K in self-field, whereas a low Jc value of 61000 Acm$^{-2}$ is recorded for the bilayer with dFe = 4 nm at the corresponding reduced temperature due to the presence of grain boundaries.
△ Less
Submitted 29 October, 2010;
originally announced November 2010.
-
Coherent interfacial bonding on the FeAs tetrahedron in Fe/Ba(Fe(1-x)Co(x))2As2 bilayers
Authors:
Thomas Thersleff,
Kazumasa Iida,
Silvia Haindl,
Martin Kidszun,
Darius Pohl,
Andreas Hartmann,
Fritz Kurth,
Jens Haenisch,
Ruben Huehne,
Bernd Rellinghaus,
Ludwig Schultz,
Bernhard Holzapfel
Abstract:
We demonstrate the growth of epitaxial Fe/Ba(Fe(1-x)Co(x))2As2 (Fe/Ba-122) bilayers on MgO(001) and LSAT(001) single crystal substrates using Pulsed Laser Deposition (PLD). By exploiting the metallic nature of the FeAs tetrahedron in the Ba-122 crystal structure, we achieve a coherent interfacial bond between bcc iron and Co-doped Ba-122. Tc values for both bilayers were close to that of the PLD t…
▽ More
We demonstrate the growth of epitaxial Fe/Ba(Fe(1-x)Co(x))2As2 (Fe/Ba-122) bilayers on MgO(001) and LSAT(001) single crystal substrates using Pulsed Laser Deposition (PLD). By exploiting the metallic nature of the FeAs tetrahedron in the Ba-122 crystal structure, we achieve a coherent interfacial bond between bcc iron and Co-doped Ba-122. Tc values for both bilayers were close to that of the PLD target. Direct observation of interfacial bonding between Fe and the Ba-122 FeAs sublattice by atomic resolution transmission electron microscopy implies that this bilayer architecture may work for other iron pnictide systems and pave the way for the fabrication of superconducting/ferromagnetic heterostructures.
△ Less
Submitted 30 April, 2010;
originally announced April 2010.
-
Critical current scaling and anisotropy in oxypnictide superconductors
Authors:
M. Kidszun,
S. Haindl,
T. Thersleff,
J. Haenisch,
A. Kauffmann,
K. Iida,
J. Freudenberger,
L. Schultz,
B. Holzapfel
Abstract:
Investigating the anisotropy of superconductors permits an access to fundamental properties. Having succeeded in the fabrication of epitaxial superconducting LaFeAs(O,F) thin films we performed an extensive study of electrical transport properties. In face of multiband superconductivity we can demonstrate that a Blatter scaling of the angular dependent critical current densities can be adopted, al…
▽ More
Investigating the anisotropy of superconductors permits an access to fundamental properties. Having succeeded in the fabrication of epitaxial superconducting LaFeAs(O,F) thin films we performed an extensive study of electrical transport properties. In face of multiband superconductivity we can demonstrate that a Blatter scaling of the angular dependent critical current densities can be adopted, although being originally developed for single band superconductors. In contrast to single band superconductors the mass anisotropy of LaFeAs(O,F) is temperature dependent. A very steep increase of the upper critical field and the irreversibility field can be observed at temperatures below 6K, indicating that the band with the smaller gap is in the dirty limit. This temperature dependence can be theoretically described by two dominating bands responsible for superconductivity. A pinning force scaling provides insight into the prevalent pinning mechanism and can be specified in terms of the Kramer model.
△ Less
Submitted 23 April, 2010;
originally announced April 2010.
-
Scaling behaviour of the critical current in clean epitaxial Ba(Fe1-xCox)2As2 thin films
Authors:
K. Iida,
J. Haenisch,
T. Thersleff,
F. Kurth,
M. Kidszun,
S. Haindl,
R. Huehne,
L. Schultz,
B. Holzapfel
Abstract:
The angular-dependent critical current density, Jc(theta), and the upper critical field, Hc2(theta), of epitaxial Ba(Fe1-xCox)2As2 thin films have been investigated. No Jc(theta) peaks for H || c were observed regardless of temperatures and magnetic fields. In contrast, Jc(theta) showed a broad maximum at theta=90 degree, which arises from intrinsic pinning. All data except at theta=90 degree ca…
▽ More
The angular-dependent critical current density, Jc(theta), and the upper critical field, Hc2(theta), of epitaxial Ba(Fe1-xCox)2As2 thin films have been investigated. No Jc(theta) peaks for H || c were observed regardless of temperatures and magnetic fields. In contrast, Jc(theta) showed a broad maximum at theta=90 degree, which arises from intrinsic pinning. All data except at theta=90 degree can be scaled by the Blatter plot. Hc2(theta) near Tc follows the anisotropic Ginzburg-Landau expression. The mass anisotropy increased from 1.5 to 2 with increasing temperature, which is an evidence for multi-band superconductivity.
△ Less
Submitted 2 March, 2010; v1 submitted 14 January, 2010;
originally announced January 2010.
-
LaFeAsO$_{1-x}$F$_{x}$ thin films: high upper critical fields and evidence of weak link behavior
Authors:
S. Haindl,
M. Kidszun,
A. Kauffmann,
K. Nenkov,
N. Kozlova,
J. Freudenberger,
T. Thersleff,
J. Haenisch,
J. Werner,
E. Reich,
L. Schultz,
B. Holzapfel
Abstract:
High-quality superconducting LaFeAsO$_{1-x}$F$_{x}$ thin films were grown on single crystalline LaAlO$_{3}$ substrates with critical temperatures (onset) up to 28 K. Resistive measurements in high magnetic fields up to 40 T reveal a paramagnetically limited upper critical field, $μ_{0}H_{c2}$(0) around 77 T and a remarkable steep slope of -7.5 T/K near $T_{c}$. From transport measurements we obs…
▽ More
High-quality superconducting LaFeAsO$_{1-x}$F$_{x}$ thin films were grown on single crystalline LaAlO$_{3}$ substrates with critical temperatures (onset) up to 28 K. Resistive measurements in high magnetic fields up to 40 T reveal a paramagnetically limited upper critical field, $μ_{0}H_{c2}$(0) around 77 T and a remarkable steep slope of -7.5 T/K near $T_{c}$. From transport measurements we observed a weak link behavior in low magnetic fields and the evidence for a broad reversible regime.
△ Less
Submitted 29 January, 2010; v1 submitted 14 July, 2009;
originally announced July 2009.
