-
The EBEX Balloon Borne Experiment - Detectors and Readout
Authors:
The EBEX Collaboration,
Maximilian Abitbol,
Asad M. Aboobaker,
Peter Ade,
Derek Araujo,
François Aubin,
Carlo Baccigalupi,
Chaoyun Bao,
Daniel Chapman,
Joy Didier,
Matt Dobbs,
Stephen M. Feeney,
Christopher Geach,
Will Grainger,
Shaul Hanany,
Kyle Helson,
Seth Hillbrand,
Gene Hilton,
Johannes Hubmayr,
Kent Irwin,
Andrew Jaffe,
Bradley Johnson,
Terry Jones,
Jeff Klein,
Andrei Korotkov
, et al. (15 additional authors not shown)
Abstract:
EBEX was a long-duration balloon-borne experiment to measure the polarization of the cosmic microwave background. The experiment had three frequency bands centered at 150, 250, and 410 GHz and was the first to use a kilo-pixel array of transition edge sensor (TES) bolometers aboard a balloon platform; shortly after reaching float we operated 504, 342, and 109 TESs at each of the bands, respectivel…
▽ More
EBEX was a long-duration balloon-borne experiment to measure the polarization of the cosmic microwave background. The experiment had three frequency bands centered at 150, 250, and 410 GHz and was the first to use a kilo-pixel array of transition edge sensor (TES) bolometers aboard a balloon platform; shortly after reaching float we operated 504, 342, and 109 TESs at each of the bands, respectively. We describe the design and characterization of the array and the readout system. We give the distributions of measured thermal conductances, normal resistances, and transition temperatures. With the exception of the thermal conductance at 150 GHz. We measured median low-loop-gain time constants $τ_{0}=$ 88, 46, and 57 ms and compare them to predictions. Two measurements of bolometer absorption efficiency show high ($\sim$0.9) efficiency at 150 GHz and medium ($\sim$0.35, and $\sim$0.25) at the two higher bands, respectively. We measure a median total optical load of 3.6, 5.3 and 5.0 pW absorbed at the three bands, respectively. EBEX pioneered the use of the digital version of the frequency domain multiplexing (FDM) system which multiplexed the bias and readout of 16 bolometers onto two wires. We present accounting of the measured noise equivalent power. The median per-detector noise equivalent temperatures referred to a black body with a temperature of 2.725 K are 400, 920, and 14500 $μ$K$\sqrt{s}$ for the three bands, respectively. We compare these values to our pre-flight predictions and to a previous balloon payload, discuss the sources of excess noise, and the path for a future payload to make full use of the balloon environment.
△ Less
Submitted 30 July, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
The EBEX Balloon Borne Experiment - Optics, Receiver, and Polarimetry
Authors:
The EBEX Collaboration,
Asad M. Aboobaker,
Peter Ade,
Derek Araujo,
François Aubin,
Carlo Baccigalupi,
Chaoyun Bao,
Daniel Chapman,
Joy Didier,
Matt Dobbs,
Christopher Geach,
Will Grainger,
Shaul Hanany,
Kyle Helson,
Seth Hillbrand,
Johannes Hubmayr,
Andrew Jaffe,
Bradley Johnson,
Terry Jones,
Jeff Klein,
Andrei Korotkov,
Adrian Lee,
Lorne Levinson,
Michele Limon,
Kevin MacDermid
, et al. (13 additional authors not shown)
Abstract:
The E and B Experiment (EBEX) was a long-duration balloon-borne cosmic microwave background polarimeter that flew over Antarctica in 2013. We describe the experiment's optical system, receiver, and polarimetric approach, and report on their in-flight performance. EBEX had three frequency bands centered on 150, 250, and 410 GHz. To make efficient use of limited mass and space we designed a 115 cm…
▽ More
The E and B Experiment (EBEX) was a long-duration balloon-borne cosmic microwave background polarimeter that flew over Antarctica in 2013. We describe the experiment's optical system, receiver, and polarimetric approach, and report on their in-flight performance. EBEX had three frequency bands centered on 150, 250, and 410 GHz. To make efficient use of limited mass and space we designed a 115 cm$^{2}$sr high throughput optical system that had two ambient temperature mirrors and four anti-reflection coated polyethylene lenses per focal plane. All frequency bands shared the same optical train. Polarimetry was achieved with a continuously rotating achromatic half-wave plate (AHWP) that was levitated with a superconducting magnetic bearing (SMB). Rotation stability was 0.45 % over a period of 10 hours, and angular position accuracy was 0.01 degrees. This is the first use of a SMB in astrophysics. The measured modulation efficiency was above 90 % for all bands. To our knowledge the 109 % fractional bandwidth of the AHWP was the broadest implemented to date. The receiver that contained one lens and the AHWP at a temperature of 4 K, the polarizing grid and other lenses at 1 K, and the two focal planes at 0.25 K performed according to specifications giving focal plane temperature stability with fluctuation power spectrum that had $1/f$ knee at 2 mHz. EBEX was the first balloon-borne instrument to implement technologies characteristic of modern CMB polarimeters including high throughput optical systems, and large arrays of transition edge sensor bolometric detectors with mutiplexed readouts.
△ Less
Submitted 30 May, 2017; v1 submitted 10 March, 2017;
originally announced March 2017.
-
The EBEX Balloon-Borne Experiment - Gondola, Attitude Control, and Control Software
Authors:
The EBEX Collaboration,
Asad Aboobaker,
Peter Ade,
Derek Araujo,
François Aubin,
Carlo Baccigalupi,
Chaoyun Bao,
Daniel Chapman,
Joy Didier,
Matt Dobbs,
Will Grainger,
Shaul Hanany,
Kyle Helson,
Seth Hillbrand,
Johannes Hubmayr,
Andrew Jaffe,
Bradley Johnson,
Terry Jones,
Jeff Klein,
Andrei Korotkov,
Adrian Lee,
Lorne Levinson,
Michele Limon,
Kevin MacDermid,
Amber D. Miller
, et al. (11 additional authors not shown)
Abstract:
The E and B Experiment (EBEX) was a long-duration balloon-borne instrument designed to measure the polarization of the cosmic microwave background (CMB) radiation. EBEX was the first balloon-borne instrument to implement a kilo-pixel array of transition edge sensor (TES) bolometric detectors and the first CMB experiment to use the digital version of the frequency domain multiplexing system for rea…
▽ More
The E and B Experiment (EBEX) was a long-duration balloon-borne instrument designed to measure the polarization of the cosmic microwave background (CMB) radiation. EBEX was the first balloon-borne instrument to implement a kilo-pixel array of transition edge sensor (TES) bolometric detectors and the first CMB experiment to use the digital version of the frequency domain multiplexing system for readout of the TES array. The scan strategy relied on 40 s peak-to-peak constant velocity azimuthal scans. We discuss the unique demands on the design and operation of the payload that resulted from these new technologies and the scan strategy. We describe the solutions implemented including the development of a power system designed to provide a total of at least 2.3 kW, a cooling system to dissipate 590 W consumed by the detectors' readout system, software to manage and handle the data of the kilo-pixel array, and specialized attitude reconstruction software. We present flight performance data showing faultless management of the TES array, adequate powering and cooling of the readout electronics, and constraint of attitude reconstruction errors such that the spurious B-modes they induced were less than 10% of CMB B-mode power spectrum with $r=0.05$.
△ Less
Submitted 11 April, 2017; v1 submitted 22 February, 2017;
originally announced February 2017.