-
Biexciton and Quadron in Self-assembled Quantum Dots
Authors:
Nguyen Hong Quang,
Nguyen Thi Kim Thanh,
Nguyen Que Huong
Abstract:
We theoretically study biexcitons and quadrons in quantum dots with parabolic confinement and give a complete comparison between the two excitations. The calculation of quadron and biexciton binding energies as functions of electron-to-hole confinement potentials and mass ratios, using unrestricted Hartree-Fock method, shows the essential differences between biexciton and quadron. The crossover be…
▽ More
We theoretically study biexcitons and quadrons in quantum dots with parabolic confinement and give a complete comparison between the two excitations. The calculation of quadron and biexciton binding energies as functions of electron-to-hole confinement potentials and mass ratios, using unrestricted Hartree-Fock method, shows the essential differences between biexciton and quadron. The crossover between the negative and positive binding energies is indicated. Besides, the effect of external magnetic field on the quadron and biexciton binding energies has also been investigated. In addition, the crossing between anti-binding and binding of both excited quadron and biexciton states at a certain range of the electron-to-hole oscillator length ratios has been found.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Development of a Vision System to Enhance the Reliability of the Pick-and-Place Robot for Autonomous Testing of Camera Module used in Smartphones
Authors:
Hoang-Anh Phan,
Duy Nam Bui,
Tuan Nguyen Dinh,
Bao-Anh Hoang,
An Nguyen Ngoc,
Dong Tran Huu Quoc,
Ha Tran Thi Thuy,
Tung Thanh Bui,
Van Nguyen Thi Thanh
Abstract:
Pick-and-place robots are commonly used in modern industrial manufacturing. For complex devices/parts like camera modules used in smartphones, which contain optical parts, electrical components and interfacing connectors, the placement operation may not absolutely accurate, which may cause damage in the device under test during the mechanical movement to make good contact for electrical functions…
▽ More
Pick-and-place robots are commonly used in modern industrial manufacturing. For complex devices/parts like camera modules used in smartphones, which contain optical parts, electrical components and interfacing connectors, the placement operation may not absolutely accurate, which may cause damage in the device under test during the mechanical movement to make good contact for electrical functions inspection. In this paper, we proposed an effective vision system including hardware and algorithm to enhance the reliability of the pick-and-place robot for autonomous testing memory of camera modules. With limited hardware based on camera and raspberry PI and using simplify image processing algorithm based on histogram information, the vision system can confirm the presence of the camera modules in feeding tray and the placement accuracy of the camera module in test socket. Through that, the system can work with more flexibility and avoid damaging the device under test. The system was experimentally quantified through testing approximately 2000 camera modules in a stable light condition. Experimental results demonstrate that the system achieves accuracy of more than 99.92%. With its simplicity and effectiveness, the proposed vision system can be considered as a useful solution for using in pick-and-place systems in industry.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
A sensor fusion approach for improving implementation speed and accuracy of RTAB-Map algorithm based indoor 3D map**
Authors:
Hoang-Anh Phan,
Phuc Vinh Nguyen,
Thu Hang Thi Khuat,
Hieu Dang Van,
Dong Huu Quoc Tran,
Bao Lam Dang,
Tung Thanh Bui,
Van Nguyen Thi Thanh,
Trinh Chu Duc
Abstract:
In recent years, 3D map** for indoor environments has undergone considerable research and improvement because of its effective applications in various fields, including robotics, autonomous navigation, and virtual reality. Building an accurate 3D map for indoor environment is challenging due to the complex nature of the indoor space, the problem of real-time embedding and positioning errors of t…
▽ More
In recent years, 3D map** for indoor environments has undergone considerable research and improvement because of its effective applications in various fields, including robotics, autonomous navigation, and virtual reality. Building an accurate 3D map for indoor environment is challenging due to the complex nature of the indoor space, the problem of real-time embedding and positioning errors of the robot system. This study proposes a method to improve the accuracy, speed, and quality of 3D indoor map** by fusing data from the Inertial Measurement System (IMU) of the Intel Realsense D435i camera, the Ultrasonic-based Indoor Positioning System (IPS), and the encoder of the robot's wheel using the extended Kalman filter (EKF) algorithm. The merged data is processed using a Real-time Image Based Map** algorithm (RTAB-Map), with the processing frequency updated in synch with the position frequency of the IPS device. The results suggest that fusing IMU and IPS data significantly improves the accuracy, map** time, and quality of 3D maps. Our study highlights the proposed method's potential to improve indoor map** in various fields, indicating that the fusion of multiple data sources can be a valuable tool in creating high-quality 3D indoor maps.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
An Enhanced Sampling-Based Method With Modified Next-Best View Strategy For 2D Autonomous Robot Exploration
Authors:
Dong Huu Quoc Tran,
Hoang-Anh Phan,
Hieu Dang Van,
Tan Van Duong,
Tung Thanh Bui,
Van Nguyen Thi Thanh
Abstract:
Autonomous exploration is a new technology in the field of robotics that has found widespread application due to its objective to help robots independently localize, scan maps, and navigate any terrain without human control. Up to present, the sampling-based exploration strategies have been the most effective for aerial and ground vehicles equipped with depth sensors producing three-dimensional po…
▽ More
Autonomous exploration is a new technology in the field of robotics that has found widespread application due to its objective to help robots independently localize, scan maps, and navigate any terrain without human control. Up to present, the sampling-based exploration strategies have been the most effective for aerial and ground vehicles equipped with depth sensors producing three-dimensional point clouds. Those methods utilize the sampling task to choose random points or make samples based on Rapidly-exploring Random Trees (RRT). Then, they decide on frontiers or Next Best Views (NBV) with useful volumetric information. However, most state-of-the-art sampling-based methodology is challenging to implement in two-dimensional robots due to the lack of environmental knowledge, thus resulting in a bad volumetric gain for evaluating random destinations. This study proposed an enhanced sampling-based solution for indoor robot exploration to decide Next Best View (NBV) in 2D environments. Our method makes RRT until have the endpoints as frontiers and evaluates those with the enhanced utility function. The volumetric information obtained from environments was estimated using non-uniform distribution to determine cells that are occupied and have an uncertain probability. Compared to the sampling-based Frontier Detection and Receding Horizon NBV approaches, the methodology executed performed better in Gazebo platform-simulated environments, achieving a significantly larger explored area, with the average distance and time traveled being reduced. Moreover, the operated proposed method on an author-built 2D robot exploring the entire natural environment confirms that the method is effective and applicable in real-world scenarios.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Detecting COVID-19 from digitized ECG printouts using 1D convolutional neural networks
Authors:
Thao Nguyen,
Hieu H. Pham,
Huy Khiem Le,
Anh Tu Nguyen,
Ngoc Tien Thanh,
Cuong Do
Abstract:
The COVID-19 pandemic has exposed the vulnerability of healthcare services worldwide, raising the need to develop novel tools to provide rapid and cost-effective screening and diagnosis. Clinical reports indicated that COVID-19 infection may cause cardiac injury, and electrocardiograms (ECG) may serve as a diagnostic biomarker for COVID-19. This study aims to utilize ECG signals to detect COVID-19…
▽ More
The COVID-19 pandemic has exposed the vulnerability of healthcare services worldwide, raising the need to develop novel tools to provide rapid and cost-effective screening and diagnosis. Clinical reports indicated that COVID-19 infection may cause cardiac injury, and electrocardiograms (ECG) may serve as a diagnostic biomarker for COVID-19. This study aims to utilize ECG signals to detect COVID-19 automatically. We propose a novel method to extract ECG signals from ECG paper records, which are then fed into a one-dimensional convolution neural network (1D-CNN) to learn and diagnose the disease. To evaluate the quality of digitized signals, R peaks in the paper-based ECG images are labeled. Afterward, RR intervals calculated from each image are compared to RR intervals of the corresponding digitized signal. Experiments on the COVID-19 ECG images dataset demonstrate that the proposed digitization method is able to capture correctly the original signals, with a mean absolute error of 28.11 ms. Our proposed 1D-CNN model, which is trained on the digitized ECG signals, allows identifying individuals with COVID-19 and other subjects accurately, with classification accuracies of 98.42%, 95.63%, and 98.50% for classifying COVID-19 vs. Normal, COVID-19 vs. Abnormal Heartbeats, and COVID-19 vs. other classes, respectively. Furthermore, the proposed method also achieves a high-level of performance for the multi-classification task. Our findings indicate that a deep learning system trained on digitized ECG signals can serve as a potential tool for diagnosing COVID-19.
△ Less
Submitted 5 October, 2022; v1 submitted 10 August, 2022;
originally announced August 2022.
-
Regularization of backward time-fractional parabolic equations by Sobolev-type equations
Authors:
Dinh Nho Hao,
Nguyen Van Duc,
Nguyen Van Thang,
Nguyen Trung Thanh
Abstract:
The problem of determining the initial condition from noisy final observations in time-fractional parabolic equations is considered. This problem is well-known to be ill-posed and it is regularized by backward Sobolev-type equations. Error estimates of Holder type are obtained with a priori and a posteriori regularization parameter choice rules. The proposed regularization method results in a stab…
▽ More
The problem of determining the initial condition from noisy final observations in time-fractional parabolic equations is considered. This problem is well-known to be ill-posed and it is regularized by backward Sobolev-type equations. Error estimates of Holder type are obtained with a priori and a posteriori regularization parameter choice rules. The proposed regularization method results in a stable noniterative numerical scheme. The theoretical error estimates are confirmed by numerical tests for one- and two-dimensional equations
△ Less
Submitted 9 September, 2020; v1 submitted 15 April, 2020;
originally announced April 2020.
-
Single measurement experimental data for an inverse medium problem inverted by a multi-frequency globally convergent numerical method
Authors:
Aleksandr E. Kolesov,
Michael V. Klibanov,
Loc H. Nguyen,
Dinh-Liem Nguyen,
Nguyen T. Thanh
Abstract:
The recently developed globally convergent numerical method for an inverse medium problem for the Helmholtz equation is tested on experimental data. The data were originally collected in the time domain, whereas the method works in the frequency domain with the multi-frequency data. Due to a huge discrepancy between the collected and computationally simulated data, the straightforward Fourier tran…
▽ More
The recently developed globally convergent numerical method for an inverse medium problem for the Helmholtz equation is tested on experimental data. The data were originally collected in the time domain, whereas the method works in the frequency domain with the multi-frequency data. Due to a huge discrepancy between the collected and computationally simulated data, the straightforward Fourier transform of the experimental data does not work. Hence, it is necessary to develop a heuristic data preprocessing procedure. This procedure is described. The preprocessed data are used as the input for the inversion algorithm. Numerical results demonstrate good accuracy in the reconstruction of both refracive indices and locations of targets. Furthermore, the reconstruction errors for refractive indices of dielectric targets are significantly less than errors of a posteriori direct measurements.
△ Less
Submitted 24 October, 2016;
originally announced October 2016.
-
Numerical studies of an adaptive finite element method applied to the reconstruction of shapes of buried objects from experimental data
Authors:
Larisa Beilina,
Nguyen Trung Thành,
Michael V. Klibanov,
John Bondestam Malmberg
Abstract:
We perform extended studies of an adaptive finite element method applied to the reconstruction of shapes of buried objects from experimental backscattering data. We use experimental data which are collected by a microwave scattering facility located at the University of North Carolina at Charlotte, USA. Our numerical tests show accurate imaging of three components of interest of targets: shapes, l…
▽ More
We perform extended studies of an adaptive finite element method applied to the reconstruction of shapes of buried objects from experimental backscattering data. We use experimental data which are collected by a microwave scattering facility located at the University of North Carolina at Charlotte, USA. Our numerical tests show accurate imaging of three components of interest of targets: shapes, locations and refractive indices.
△ Less
Submitted 4 March, 2015; v1 submitted 27 February, 2015;
originally announced February 2015.
-
Globally convergent and adaptive finite element methods in imaging of buried objects from experimental backscattering radar measurements
Authors:
Larisa Beilina,
Nguyen Trung Thành,
Michael V. Klibanov,
John Bondestam Malmberg
Abstract:
We consider a two-stage numerical procedure for imaging of objects buried in dry sand using time-dependent backscattering experimental radar measurements. These measurements are generated by a single point source of electric pulses and are collected using a microwave scattering facility which was built at the University of North Carolina at Charlotte. Our imaging problem is formulated as the inver…
▽ More
We consider a two-stage numerical procedure for imaging of objects buried in dry sand using time-dependent backscattering experimental radar measurements. These measurements are generated by a single point source of electric pulses and are collected using a microwave scattering facility which was built at the University of North Carolina at Charlotte. Our imaging problem is formulated as the inverse problem of the reconstruction of the spatially distributed dielectric permittivity $\varepsilon_\mathrm{r}\left(\mathbf{x}\right), \ \mathbf{x}\in \mathbb{R}^{3}$, which is an unknown coefficient in Maxwell's equations.
On the first stage an approximately globally convergent method is applied to get a good first approximation for the exact solution. On the second stage a local adaptive finite element method is applied to refine the solution obtained on the first stage. The two-stage numerical procedure results in accurate imaging of all three components of interest of targets: shapes, locations and refractive indices. In this paper we briefly describe methods and present new reconstruction results for both stages.
△ Less
Submitted 3 September, 2014;
originally announced September 2014.
-
Recovering of dielectric constants of explosives via a globally strictly convex cost functional
Authors:
Michael V. Klibanov,
Nguyen Trung Thành
Abstract:
The inverse problem of estimating dielectric constants of explosives using boundary measurements of one component of the scattered electric field is addressed. It is formulated as a coefficient inverse problem for a hyperbolic differential equation. After applying the Laplace transform, a new cost functional is constructed and a variational problem is formulated. The key feature of this functional…
▽ More
The inverse problem of estimating dielectric constants of explosives using boundary measurements of one component of the scattered electric field is addressed. It is formulated as a coefficient inverse problem for a hyperbolic differential equation. After applying the Laplace transform, a new cost functional is constructed and a variational problem is formulated. The key feature of this functional is the presence of the Carleman Weight Function for the Laplacian. The strict convexity of this functional on a bounded set in a Hilbert space of an arbitrary size is proven. This allows for establishing the global convergence of the gradient descent method. Some results of numerical experiments are presented.
△ Less
Submitted 4 August, 2014;
originally announced August 2014.
-
Imaging of buried objects from experimental backscattering time dependent measurements using a globally convergent inverse algorithm
Authors:
Nguyen Trung Thành,
Larisa Beilina,
Michael V. Klibanov,
Michael A. Fiddy
Abstract:
We consider the problem of imaging of objects buried under the ground using backscattering experimental time dependent measurements generated by a single point source or one incident plane wave. In particular, we estimate dielectric constants of those objects using the globally convergent inverse algorithm of Beilina and Klibanov. Our algorithm is tested on experimental data collected using a micr…
▽ More
We consider the problem of imaging of objects buried under the ground using backscattering experimental time dependent measurements generated by a single point source or one incident plane wave. In particular, we estimate dielectric constants of those objects using the globally convergent inverse algorithm of Beilina and Klibanov. Our algorithm is tested on experimental data collected using a microwave scattering facility at the University of North Carolina at Charlotte. There are two main challenges working with this type of experimental data: (i) there is a huge misfit between these data and computationally simulated data, and (ii) the signals scattered from the targets may overlap with and be dominated by the reflection from the ground's surface. To overcome these two challenges, we propose new data preprocessing steps to make the experimental data to be approximately the same as the simulated ones, as well as to remove the reflection from the ground's surface. Results of total 25 data sets of both non blind and blind targets indicate a good accuracy.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Reconstruction of shapes and refractive indices from backscattering experimental data using the adaptivity
Authors:
Larisa Beilina,
Nguyen Trung Thành,
Michael V. Klibanov,
John Bondestam Malmberg
Abstract:
We consider the inverse problem of the reconstruction of the spatially distributed dielectric constant $\varepsilon_{r}\left(\mathbf{x}\right), \ \mathbf{x}\in \mathbb{R}^{3}$, which is an unknown coefficient in the Maxwell's equations, from time-dependent backscattering experimental radar data associated with a single source of electric pulses. The refractive index is…
▽ More
We consider the inverse problem of the reconstruction of the spatially distributed dielectric constant $\varepsilon_{r}\left(\mathbf{x}\right), \ \mathbf{x}\in \mathbb{R}^{3}$, which is an unknown coefficient in the Maxwell's equations, from time-dependent backscattering experimental radar data associated with a single source of electric pulses. The refractive index is $n\left(\mathbf{x}\right) =\sqrt{\varepsilon_{r}\left(\mathbf{x}\right)}.$ The coefficient $\varepsilon_{r}\left(\mathbf{x}\right) $ is reconstructed using a two-stage reconstruction procedure. In the first stage an approximately globally convergent method proposed is applied to get a good first approximation of the exact solution. In the second stage a locally convergent adaptive finite element method is applied, taking the solution of the first stage as the starting point of the minimization of the Tikhonov functional. This functional is minimized on a sequence of locally refined meshes. It is shown here that all three components of interest of targets can be simultaneously accurately imaged: refractive indices, shapes and locations.
△ Less
Submitted 23 April, 2014;
originally announced April 2014.
-
Representing, Simulating and Analysing Ho Chi Minh City Tsunami Plan by Means of Process Models
Authors:
Le Nguyen Tuan Thanh,
Chihab Hanachi,
Serge Stinckwich,
Ho Tuong Vinh
Abstract:
This paper considers the textual plan (guidelines) proposed by People's Committee of Ho Chi Minh City (Vietnam) to manage earthquake and tsunami, and try to represent it in a more formal way, in order to provide means to simulate, analyse and adapt it. We first present a state of the art about coordination models for disaster management with a focus on process oriented approaches. We give an overv…
▽ More
This paper considers the textual plan (guidelines) proposed by People's Committee of Ho Chi Minh City (Vietnam) to manage earthquake and tsunami, and try to represent it in a more formal way, in order to provide means to simulate, analyse and adapt it. We first present a state of the art about coordination models for disaster management with a focus on process oriented approaches. We give an overview of the different dimensions of the textual tsunami plan of Ho Chi Minh City and then the graphical representation of its process with BPMN (Business Process Model and Notation). We finally show how to exploit this process with workflow tools to simulate (YAWL tool) and analyse it (ProM tool).
△ Less
Submitted 21 December, 2013; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Convergence rates of recursive Newton-type methods for multifrequency scattering problems
Authors:
Mourad Sini,
Nguyen Trung Thành
Abstract:
We are concerned with the reconstruction of a sound-soft obstacle using far field measurements of the scattered waves associated with incident plane waves sent from one direction but at multiple frequencies. We define, for each frequency, the observable shape as the one which is described by finitely many modes and produces a far field pattern close to the measured one. In the first step, we propo…
▽ More
We are concerned with the reconstruction of a sound-soft obstacle using far field measurements of the scattered waves associated with incident plane waves sent from one direction but at multiple frequencies. We define, for each frequency, the observable shape as the one which is described by finitely many modes and produces a far field pattern close to the measured one. In the first step, we propose a recursive Newton-type method for the reconstruction of the observable shape at the highest frequency knowing an estimate of the observable shape at the lowest frequency. We analyze its convergence and derive its convergence rate in terms of the frequency step, the number of the Newton iterations and the noise level. In the second step, we design a multilevel Newton method which has the same convergence rate as the one described in the first step but avoids the need of a good estimate of the observable shape at the lowest frequency and a small frequency step (or a large number of Newton iterations). The performances of the proposed algorithms are illustrated with numerical results using simulated data.
△ Less
Submitted 18 October, 2013;
originally announced October 2013.
-
Reconstruction from blind experimental data for an inverse problem for a hyperbolic equation
Authors:
Larisa Beilina,
Nguyen Trung Thành,
Michael V. Klibanov,
Michael A. Fiddy
Abstract:
We consider the problem of reconstruction of dielectrics from blind backscattered experimental data. Experimental data were collected by a device, which was built at University of North Carolina at Charlotte. This device sends electrical pulses into the medium and collects the time resolved backscattered data on a part of a plane. The spatially distributed dielectric constant…
▽ More
We consider the problem of reconstruction of dielectrics from blind backscattered experimental data. Experimental data were collected by a device, which was built at University of North Carolina at Charlotte. This device sends electrical pulses into the medium and collects the time resolved backscattered data on a part of a plane. The spatially distributed dielectric constant $\varepsilon_{r}(\mathbf{x}),\mathbf{x}\in \mathbb{R}^{3}$ is the unknown coefficient of a wave-like PDE. This coefficient is reconstructed from those data in blind cases. To do this, a globally convergent numerical method is used.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Reconstruction of the refractive index from experimental backscattering data using a globally convergent inverse method
Authors:
Nguyen Trung Thành,
Larisa Beilina,
Michael V. Klibanov,
Michael A. Fiddy
Abstract:
The problem to be studied in this work is within the context of coefficient identification problems for the wave equation. More precisely, we consider the problem of reconstruction of the refractive index (or equivalently, the dielectric constant) of an inhomogeneous medium using one backscattering boundary measurement. The goal of this paper is to analyze the performance of a globally convergent…
▽ More
The problem to be studied in this work is within the context of coefficient identification problems for the wave equation. More precisely, we consider the problem of reconstruction of the refractive index (or equivalently, the dielectric constant) of an inhomogeneous medium using one backscattering boundary measurement. The goal of this paper is to analyze the performance of a globally convergent algorithm of Beilina and Klibanov on experimental data acquired in the Microwave Laboratory at University of North Carolina at Charlotte. The main challenge working with experimental data is the the huge misfit between these data and computationally simulated data. We present data pre-processing steps to make the former somehow look similar to the latter. Results of both non-blind and blind targets are shown indicating good reconstructions even for high contrasts between the targets and the background medium.
△ Less
Submitted 13 June, 2013;
originally announced June 2013.
