-
The Realization of a Gas Puff Imaging System on the Wendelstein 7-X Stellarator
Authors:
J. L. Terry,
A. von Stechow,
S. G. Baek,
S. B. Ballinger,
O. Grulke,
C. von Sehren,
R. Laube,
C. Killer,
F. Scharmer,
K. J. Brunner,
J. Knauer,
S. Bois,
the W7-X Team
Abstract:
A system for studying the spatio-temporal dynamics of fluctuations in the boundary of the W7-X plasma using the Gas-Puff Imaging (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices like W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distanc…
▽ More
A system for studying the spatio-temporal dynamics of fluctuations in the boundary of the W7-X plasma using the Gas-Puff Imaging (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices like W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface locations for different magnetic configurations in W7-X, and management of heat loads on the system's plasma-facing components. The system features a pair of "converging-diverging" nozzles for partially collimating the gas puffed locally $\approx$135 mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (also acting as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 x 16 pixel detector array of the fast camera. The DEGAS 2 neutrals code was used to simulate the H$_α$ (656 nm) and the HeI (587 nm) line emission expected from well-characterized gas-puffs of H$_2$ and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal to noise ratios (>100) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the 2-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge, scrape-off layer, and in and around the magnetic islands that make up the island divertor configuration employed on W7-X.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
A three-point velocity estimation method for turbulent flows in two spatial dimensions
Authors:
J. M. Losada,
A. D. Helgeland,
J. L. Terry,
O. E. Garcia
Abstract:
Time delay and velocity estimation has been a widely studied subject in the context of signal processing, with applications in many different fields of physics. The velocity of fluctuation structures is typically estimated as the distance between two measurement points divided by the time lag that maximizes the cross-correlation function between the measured signals. In this contribution, we demon…
▽ More
Time delay and velocity estimation has been a widely studied subject in the context of signal processing, with applications in many different fields of physics. The velocity of fluctuation structures is typically estimated as the distance between two measurement points divided by the time lag that maximizes the cross-correlation function between the measured signals. In this contribution, we demonstrate that this technique is not suitable in two spatial dimensions unless the velocity is aligned with the separation between the measurement points. We present an improved method to accurately estimate both components of the velocity vector relying on three non-aligned measurement points. The cross-correlation based three-point time delay method is shown to give exact results for the velocity components in the case of a super-position of uncorrelated Gaussian pulses. The new technique is tested on synthetic data generated from realizations of such processes for which the underlying velocity components are known. The results are compared with and found vastly superior to those obtained using the standard two-point technique. Finally, we demonstrate the applicability of the three-point method on gas puff imaging data of strongly intermittent plasma fluctuations at the boundary of the Alcator C-Mod tokamak.
△ Less
Submitted 2 February, 2024; v1 submitted 28 November, 2023;
originally announced November 2023.
-
Strongly intermittent far scrape-off layer fluctuations in Alcator C-Mod plasmas close to the empirical discharge density limit
Authors:
Sajidah Ahmed,
Odd Erik Garcia,
Adam Q Kuang,
Brian LaBombard,
James L Terry,
Audun Theodorsen
Abstract:
Intermittent plasma fluctuations in the boundary region of the Alcator C-Mod device were comprehensively investigated using data time-series from gas puff imaging and mirror Langmuir probe diagnostics. Fluctuations were sampled during stationary plasma conditions in ohmically heated, lower single null diverted configurations with scans in both line-averaged density and plasma current, with Greenwa…
▽ More
Intermittent plasma fluctuations in the boundary region of the Alcator C-Mod device were comprehensively investigated using data time-series from gas puff imaging and mirror Langmuir probe diagnostics. Fluctuations were sampled during stationary plasma conditions in ohmically heated, lower single null diverted configurations with scans in both line-averaged density and plasma current, with Greenwald density fractions up to 0.85. Utilizing a stochastic model, we describe the plasma fluctuations as a super-position of uncorrelated pulses, with large-amplitude events corresponding to blob-like filaments moving through the scrape-off layer. A deconvolution method is used to estimate the pulse arrival times and amplitudes. The analysis reveals a significant increase of pulse amplitudes and waiting times as the line-averaged density approaches the empirical discharge density limit. Broadened and flattened average radial profiles are thus accompanied by strongly intermittent and large-amplitude fluctuations. Although these filaments are arriving less frequently at high line-averaged densities, we show that there are significant increases in radial far-SOL particle and heat fluxes which will further enhance plasma--wall interactions. The stochastic model has been used as a framework for study of the scalings in the intermittency parameter, flux and mean amplitude and waiting times, and is being used to inform predictive capability for the effects of filamentary transport as a function of Greenwald fraction.
△ Less
Submitted 8 August, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Deep modelling of plasma and neutral fluctuations from gas puff turbulence imaging
Authors:
A. Mathews,
J. L. Terry,
S. G. Baek,
J. W. Hughes,
A. Q. Kuang,
B. LaBombard,
M. A. Miller,
D. Stotler,
D. Reiter,
W. Zholobenko,
M. Goto
Abstract:
The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collision…
▽ More
The role of turbulence in setting boundary plasma conditions is presently a key uncertainty in projecting to fusion energy reactors. To robustly diagnose edge turbulence, we develop and demonstrate a technique to translate brightness measurements of HeI line radiation into local plasma fluctuations via a novel integrated deep learning framework that combines neutral transport physics and collisional radiative theory for the $3^3 D - 2^3 P$ transition in atomic helium. The tenets for experimental validity are reviewed, illustrating that this turbulence analysis for ionized gases is transferable to both magnetized and unmagnetized environments with arbitrary geometries. Based upon fast camera data on the Alcator C-Mod tokamak, we present the first 2-dimensional time-dependent experimental measurements of the turbulent electron density, electron temperature, and neutral density revealing shadowing effects in a fusion plasma using a single spectral line.
△ Less
Submitted 19 May, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Tracking Blobs in the Turbulent Edge Plasma of a Tokamak Fusion Device
Authors:
Woonghee Han,
Randall A. Pietersen,
Rafael Villamor-Lora,
Matthew Beveridge,
Nicola Offeddu,
Theodore Golfinopoulos,
Christian Theiler,
James L. Terry,
Earl S. Marmar,
Iddo Drori
Abstract:
The analysis of turbulence in plasmas is fundamental in fusion research. Despite extensive progress in theoretical modeling in the past 15 years, we still lack a complete and consistent understanding of turbulence in magnetic confinement devices, such as tokamaks. Experimental studies are challenging due to the diverse processes that drive the high-speed dynamics of turbulent phenomena. This work…
▽ More
The analysis of turbulence in plasmas is fundamental in fusion research. Despite extensive progress in theoretical modeling in the past 15 years, we still lack a complete and consistent understanding of turbulence in magnetic confinement devices, such as tokamaks. Experimental studies are challenging due to the diverse processes that drive the high-speed dynamics of turbulent phenomena. This work presents a novel application of motion tracking to identify and track turbulent filaments in fusion plasmas, called blobs, in a high-frequency video obtained from Gas Puff Imaging diagnostics. We compare four baseline methods (RAFT, Mask R-CNN, GMA, and Flow Walk) trained on synthetic data and then test on synthetic and real-world data obtained from plasmas in the Tokamak `a Configuration Variable (TCV). The blob regime identified from an analysis of blob trajectories agrees with state-of-the-art conditional averaging methods for each of the baseline methods employed, giving confidence in the accuracy of these techniques. High entry barriers traditionally limit tokamak plasma research to a small community of researchers in the field. By making a dataset and benchmark publicly available, we hope to open the field to a broad community in science and engineering.
△ Less
Submitted 10 August, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
I-mode pedestal relaxation events in the Alcator C-Mod and ASDEX Upgrade tokamaks
Authors:
D. Silvagni,
J. L. Terry,
W. McCarthy,
A. E. Hubbard,
T. Eich,
M. Faitsch,
L. Gil,
T. Golfinopoulos,
G. Grenfell,
M. Griener,
T. Happel,
J. W. Hughes,
U. Stroth,
E. Viezzer,
the ASDEX Upgrade team,
the EUROfusion MST1 team
Abstract:
In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mod…
▽ More
In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mode discharges, mainly when the plasma is close to the H-mode transition. Also, the nature of the triggering instability is discussed by comparing measurements close to the separatrix in both devices. The PRE relative energy loss from the confined region increases with decreasing pedestal top collisionality $ν_{\mathrm{ped}}^*$. In addition, the relative electron temperature drop at the pedestal top, which is related to the conductive energy loss, rises with decreasing $ν_{\mathrm{ped}}^*$. Finally, the peak parallel energy fluence due to the PRE measured on the divertor in both devices is compared to the model introduced in [1] for type-I ELMs. The model is shown to provide an upper boundary for PRE energy fluence data, while a lower boundary is found by dividing the model by three. These two boundaries are used to make projections to future devices such as DEMO and ARC.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Comparison between mirror Langmuir probe and gas puff imaging measurements of intermittent fluctuations in the Alcator C-Mod scrape-off layer
Authors:
R. Kube,
A. Theodorsen,
O. E. Garcia,
D. Brunner,
B. LaBombard,
J. L. Terry
Abstract:
Statistical properties of the scrape-off layer (SOL) plasma fluctuations are studied in ohmically heated plasmas in the Alcator C-Mod tokamak. For the first time, plasma fluctuations as well as parameters that describe the fluctuations are compared across measurements from a mirror Langmuir probe (MLP) and from gas-puff imaging (GPI) that sample the same plasma discharge. This comparison is comple…
▽ More
Statistical properties of the scrape-off layer (SOL) plasma fluctuations are studied in ohmically heated plasmas in the Alcator C-Mod tokamak. For the first time, plasma fluctuations as well as parameters that describe the fluctuations are compared across measurements from a mirror Langmuir probe (MLP) and from gas-puff imaging (GPI) that sample the same plasma discharge. This comparison is complemented by an analysis of line emission time-series data, synthesized from the MLP electron density and temperature measurements. The fluctuations observed by the MLP and GPI typically display relative fluctuation amplitudes of order unity together with positively skewed and flattened probability density functions. Such data time series are well described by an established stochastic framework which model the data as a superposition of uncorrelated, two-sided exponential pulses. The most important parameter of the process is the intermittency parameter, γ = τd / τw where τd denotes the duration time of a single pulse and τw gives the average waiting time between consecutive pulses. Here we show, using a new deconvolution method, that these parameters can be consistently estimated from different statistics of the data. We also show that the statistical properties of the data sampled by the MLP and GPI diagnostic are very similar. Finally, a comparison of the GPI signal to the synthetic line-emission time series suggests that the measured emission intensity can not be explained solely by a simplified model which neglects neutral particle dynamics.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Intermittent electron density and temperature fluctuations and associated fluxes in the Alcator C-Mod scrape-off layer
Authors:
Ralph Kube,
Odd Erik Garcia,
Audun Theodorsen,
Dan Brunner,
Adam QingYang Kuang,
Brian LaBombard,
James L. Terry
Abstract:
The Alcator C-Mod mirror Langmuir probe system has been used to sample data time series of fluctuating plasma parameters in the outboard mid-plane far scrape-off layer. We present a statistical analysis of one second long time series of electron density, temperature, radial electric drift velocity and the corresponding particle and electron heat fluxes. These are sampled during stationary plasma c…
▽ More
The Alcator C-Mod mirror Langmuir probe system has been used to sample data time series of fluctuating plasma parameters in the outboard mid-plane far scrape-off layer. We present a statistical analysis of one second long time series of electron density, temperature, radial electric drift velocity and the corresponding particle and electron heat fluxes. These are sampled during stationary plasma conditions in an ohmically heated, lower single null diverted discharge.
The electron density and temperature are strongly correlated and feature fluctuation statistics similar to the ion saturation current. Both electron density and temperature time series are dominated by intermittent, large-amplitude burst with an exponential distribution of both burst amplitudes and waiting times between them.
The characteristic time scale of the large-amplitude bursts is approximately 15μs. Large-amplitude velocity fluctuations feature a slightly faster characteristic time scale and appear at a faster rate than electron density and temperature fluctuations.
Describing these time series as a superposition of uncorrelated exponential pulses, we find that probability distribution functions, power spectral densities as well as auto-correlation functions of the data time series agree well with predictions from the stochastic model.
The electron particle and heat fluxes present large-amplitude fluctuations. For this low-density plasma, the radial electron heat flux is dominated by convection, that is, correlations of fluctuations in the electron density and radial velocity. Hot and dense blobs contribute approximately 6% of the total fluctuation driven heat flux.
△ Less
Submitted 14 March, 2018;
originally announced March 2018.
-
Universality of Poisson-driven plasma fluctuations in the Alcator C-Mod scrape-off layer
Authors:
A. Theodorsen,
O. E. Garcia,
R. Kube,
B. LaBombard,
J. L. Terry
Abstract:
Large-amplitude, intermittent fluctuations are ubiquitous in the boundary region of magnetically confined plasmas and lead to detrimental plasma-wall interactions in the next-generation, high duty cycle fusion power experiments. Using gas puff imaging data time series from the scrape-off layer in the Alcator C-Mod device, it is here demonstrated that the large-amplitude fluctuations can be describ…
▽ More
Large-amplitude, intermittent fluctuations are ubiquitous in the boundary region of magnetically confined plasmas and lead to detrimental plasma-wall interactions in the next-generation, high duty cycle fusion power experiments. Using gas puff imaging data time series from the scrape-off layer in the Alcator C-Mod device, it is here demonstrated that the large-amplitude fluctuations can be described as a super-position of pulses with fixed shape and constant duration. By applying a new deconvolution algorithm on the data time series with a two-sided exponential pulse function, the arrival times and amplitudes of the pulses can be estimated and the measurement time series can be reconstructed with high accuracy. The pulse amplitudes are shown to follow an exponential distribution. The waiting times between pulses are uncorrelated, their distribution has an exponential tail, and the number of arrivals is a linear function of time. This demonstrates that pulse arrivals follow a homogeneous Poisson process. Identical statistical properties apply to both ohmic and high confinement mode plasmas, clearly demonstrating universality of the fluctuation statistics in the boundary region of Alcator C-Mod.
△ Less
Submitted 5 October, 2018; v1 submitted 14 February, 2018;
originally announced February 2018.
-
Intermittent fluctuations in the Alcator C-Mod scrape-off layer for ohmic and high confinement mode plasmas
Authors:
O. E. Garcia,
R. Kube,
A. Theodorsen,
B. LaBombard,
J. L. Terry
Abstract:
Plasma fluctuations in the scrape-off layer of the Alcator C-Mod tokamak in ohmic and high confinement modes have been analyzed using gas puff imaging data. In all cases investigated, the time series of emission from a single spatially-resolved view into the gas puff are dominated by large-amplitude bursts, attributed to blob-like filament structures moving radially outwards and poloidally. There…
▽ More
Plasma fluctuations in the scrape-off layer of the Alcator C-Mod tokamak in ohmic and high confinement modes have been analyzed using gas puff imaging data. In all cases investigated, the time series of emission from a single spatially-resolved view into the gas puff are dominated by large-amplitude bursts, attributed to blob-like filament structures moving radially outwards and poloidally. There is a remarkable similarity of the fluctuation statistics in ohmic plasmas and in edge localized mode-free and enhanced D-alpha high confinement mode plasmas. Conditionally averaged wave forms have a two-sided exponential shape with comparable temporal scales and asymmetry, while the burst amplitudes and the waiting times between them are exponentially distributed. The probability density functions and the frequency power spectral densities are self-similar for all these confinement modes. These results are strong evidence in support of a stochastic model describing the plasma fluctuations in the scrape-off layer as a super-position of uncorrelated exponential pulses. Predictions of this model are in excellent agreement with experimental measurements in both ohmic and high confinement mode plasmas. The stochastic model thus provides a valuable tool for predicting fluctuation-induced plasma-wall interactions in magnetically confined fusion plasmas.
△ Less
Submitted 2 January, 2018;
originally announced January 2018.
-
Characterization of SOL Plasma Flows and Potentials in Alcator C-Mod
Authors:
R. Hong,
S. J. Wukitch,
Y. Lin,
J. L. Terry,
I. Cziegler,
M. L. Reinke,
G. R. Tynan
Abstract:
Gas-puff imaging techniques are employed to determine the far SOL region radial electric field and the plasma potential in ICRF heated discharges in the Alcator C-Mod tokamak. The 2-dimensional velocity fields of the turbulent structures, which are advected by RF-induced $ \mathbf{E\times B} $ flows, are obtained via the time-delay estimation (TDE) techniques. Both the magnitude and radial extensi…
▽ More
Gas-puff imaging techniques are employed to determine the far SOL region radial electric field and the plasma potential in ICRF heated discharges in the Alcator C-Mod tokamak. The 2-dimensional velocity fields of the turbulent structures, which are advected by RF-induced $ \mathbf{E\times B} $ flows, are obtained via the time-delay estimation (TDE) techniques. Both the magnitude and radial extension of the radial electric field $ E_r $ are observed to increase with the toroidal magnetic field strength $ B_\varphi $ and the ICRF power. In particular, the RF-induced $ E_r $ extends from the vicinity of the ICRF antenna to the separatrix when $ B_\varphi=7.9\,\mathrm{T} $ and $ P_{\mathrm{ICRF}} \gtrsim 1\,\mathrm{MW} $. In addition, low-Z impurity seeding near the antenna is found to substantially reduce the sheath potential associated with ICRF power. The ICRF-induced potentials are also estimated in different antenna configurations: (1) conventional toroidally-aligned (TA) antenna versus field-aligned (FA) antenna; (2) FA monopole versus FA dipole. Results show that FA and TA antennas produce similar magnitude of plasma potentials, and the FA monopole induced greater potential than the FA dipole phasing.
△ Less
Submitted 16 January, 2018; v1 submitted 22 March, 2017;
originally announced March 2017.
-
Relationship between frequency power spectra and intermittent, large-amplitude bursts in the Alcator C-Mod scrape-off layer
Authors:
A. Theodorsen,
O. E. Garcia,
R. Kube,
B. LaBombard,
J. L. Terry
Abstract:
Fluctuations in the boundary region of the Alcator C-Mod tokamak have been analyzed using gas puff imaging data from a set of Ohmically heated plasma density scan experiments. It is found that the relative fluctuation amplitudes are modest and close to normally distributed at the separatrix but become increasingly larger and intermittent towards the main chamber wall. The frequency power spectra a…
▽ More
Fluctuations in the boundary region of the Alcator C-Mod tokamak have been analyzed using gas puff imaging data from a set of Ohmically heated plasma density scan experiments. It is found that the relative fluctuation amplitudes are modest and close to normally distributed at the separatrix but become increasingly larger and intermittent towards the main chamber wall. The frequency power spectra are nevertheless similar for all radial positions and line-averaged densities. Predictions of a stochastic model, describing the plasma fluctuations as a super-position of uncorrelated pulses, are shown to be in excellent agreement with the measurements. This implies that the pulse duration is the same, while the degree of pulse overlap decreases radially outwards in the scrape-off layer. The model also describes the rate of threshold level crossings, which provide novel predictions of plasma--wall interactions due to transient transport events.
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
Kinetic modeling of divertor heat load fluxes in the Alcator C-Mod and DIII-D tokamaks
Authors:
A. Y. Pankin,
T. Rafiq,
A. H. Kritz,
G. Y. Park,
C. S. Chang,
D. Brunner,
R. J. Groebner,
J. W. Hughes,
B. LaBombard,
J. L. Terry,
S. Ku
Abstract:
The guiding-center kinetic neoclassical transport code, XGC0, [C.S. Chang et. al, Phys. Plasmas 11, 2649 (2004)] is used to compute the heat fluxes and the heat-load width in the outer divertor plates of Alcator C-Mod and DIII-D tokamaks. The dependence of the width of heat-load fluxes on neoclassical effects, neutral collisions and anomalous transport is investigated using the XGC0 code. The XGC0…
▽ More
The guiding-center kinetic neoclassical transport code, XGC0, [C.S. Chang et. al, Phys. Plasmas 11, 2649 (2004)] is used to compute the heat fluxes and the heat-load width in the outer divertor plates of Alcator C-Mod and DIII-D tokamaks. The dependence of the width of heat-load fluxes on neoclassical effects, neutral collisions and anomalous transport is investigated using the XGC0 code. The XGC0 code includes realistic X-point geometry, a neutral source model, the effects of collisions, and a diffusion model for anomalous transport. It is observed that width of the XGC0 neoclassical heat-load is approximately inversely proportional to the total plasma current $I_{\rm p}$. The scaling of the width of the divertor heat-load with plasma current is examined for an Alcator C-Mod discharge and four DIII-D discharges. The scaling of the divertor heat-load width with plasma current is found to be weaker in the Alcator C-Mod discharge compared to scaling found in the DIII-D discharges. The effect of neutral collisions on the $1/I_{\rm p}$ scaling of heat-load width is shown not to be significant. Although inclusion of poloidally uniform anomalous transport results in a deviation from the $1/I_{\rm p}$ scaling, the inclusion of the anomalous transport that is driven by ballooning-type instabilities results in recovering the neoclassical $1/I_{\rm p}$ scaling. The Bohm or Gyro-Bohm scalings of anomalous transport does not strongly affect the dependence of the heat-load width on plasma current. The inclusion of anomalous transport, in general, results in widening the width of neoclassical divertor heat-load and enhances the neoclassical heat-load fluxes on the divertor plates. Understanding heat transport in the tokamak scrape-off layer plasmas is important for strengthening the basis for predicting divertor conditions in ITER.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Fluctuation statistics in the scrape-off layer of Alcator C-Mod
Authors:
Ralph Kube,
Odd Erik Garcia,
Audun Theodorsen,
Brian LaBombard,
James L. Terry
Abstract:
We study long time series of the ion saturation current and floating potential, sampled by Langmuir probes dwelled in the outboard mid-plane scrape off layer and embedded in the lower divertor baffle of Alcator C-Mod. A series of ohmically heated L-mode plasma discharges is investigated with line-averaged plasma density ranging from n_e/n_G = 0.15 to 0.42, where n_G is the Greenwald density.
All…
▽ More
We study long time series of the ion saturation current and floating potential, sampled by Langmuir probes dwelled in the outboard mid-plane scrape off layer and embedded in the lower divertor baffle of Alcator C-Mod. A series of ohmically heated L-mode plasma discharges is investigated with line-averaged plasma density ranging from n_e/n_G = 0.15 to 0.42, where n_G is the Greenwald density.
All ion saturation current time series that are sampled in the far scrape-off layer are characterized by large-amplitude burst events. Coefficients of skewness and excess kurtosis of the time series obey a quadratic relationship and their histograms coincide partially upon proper normalization. Histograms of the ion saturation current time series are found to agree well with a prediction of a stochastic model for the particle density fluctuations in scrape-off layer plasmas.
The distribution of the waiting times between successive large-amplitude burst events and of the burst amplitudes are approximately described by exponential distributions. The average waiting time and burst amplitude are found to vary weakly with the line-averaged plasma density.
Conditional averaging reveals that the radial blob velocity, estimated from floating potential measurements, increases with the normalized burst amplitude in the outboard mid-plane scrape-off layer. For low density discharges, the conditionally averaged waveform of the floating potential associated with large amplitude bursts at the divertor probes has a dipolar shape. In detached divertor conditions the average waveform is random, indicating electrical disconnection of blobs from the sheaths at the divertor targets.
△ Less
Submitted 17 February, 2016; v1 submitted 15 October, 2014;
originally announced October 2014.
-
Burst statistics in Alcator C-Mod SOL turbulence
Authors:
O. E. Garcia,
I. Cziegler,
R. Kube,
B. LaBombard,
J. L. Terry
Abstract:
Bursty fluctuations in the scrape-off layer (SOL) of Alcator C-Mod have been analyzed using gas puff imaging data. This reveals many of the same fluctuation properties as Langmuir probe measurements, including normal distributed fluctuations in the near SOL region while the far SOL plasma is dominated by large amplitude bursts due to radial motion of blob-like structures. Conditional averaging rev…
▽ More
Bursty fluctuations in the scrape-off layer (SOL) of Alcator C-Mod have been analyzed using gas puff imaging data. This reveals many of the same fluctuation properties as Langmuir probe measurements, including normal distributed fluctuations in the near SOL region while the far SOL plasma is dominated by large amplitude bursts due to radial motion of blob-like structures. Conditional averaging reveals burst wave forms with a fast rise and slow decay and exponentially distributed waiting times. Based on this, a stochastic model of burst dynamics is constructed. The model predicts that fluctuation amplitudes should follow a Gamma distribution. This is shown to be a good description of the gas puff imaging data, validating this aspect of the model.
△ Less
Submitted 31 May, 2012;
originally announced May 2012.
-
On the statistics of edge fluctuations: comparative study between various fusion devices
Authors:
F. Sattin,
M. Agostini,
P. Scarin,
N. Vianello,
R. Cavazzana,
L. Marrelli,
G. Serianni,
S. J. Zweben,
R. J. Maqueda,
Y. Yagi,
H. Sakakita,
H. Koguchi,
S. Kiyama,
Y. Hirano,
J. L. Terry
Abstract:
In this paper we present a statistical study of edge fluctuations taken with the Gas Puffing Imaging (GPI) diagnostics. We carry out a comparison of GPI signal from an extensive database including four devices (two Tokamaks and two Reversed Field Pinches). The data are analyzed in terms of their statistical moments Skewness and Kurtosis, as done in [B. Labit, et al, Phys. Rev. Lett. \textbf{98},…
▽ More
In this paper we present a statistical study of edge fluctuations taken with the Gas Puffing Imaging (GPI) diagnostics. We carry out a comparison of GPI signal from an extensive database including four devices (two Tokamaks and two Reversed Field Pinches). The data are analyzed in terms of their statistical moments Skewness and Kurtosis, as done in [B. Labit, et al, Phys. Rev. Lett. \textbf{98}, 255002 (2007)]. The data align along parabolic curves, although different from machine to machine, with some spread around the best-fitting curve. A discussion about the meaning of the parabolic trend as well as the departure of real data from it is provided. A phenomenological model is finally provided, attempting to accomodate experimental evidence.
△ Less
Submitted 12 February, 2009;
originally announced February 2009.
