-
The increase of the light collection from scintillation strip with hole for WLS fiber using various types of fillers
Authors:
A. Simonenko,
A. Artikov,
V. Baranov,
J. Budagov,
D. Chokheli,
Yu. Davydov,
V. Glagolev,
Yu. Kharzheev,
V. Kolomoetz,
A. Shalyugin,
V. Tereschenko
Abstract:
The light collection of the extruded scintillator strip samples with WLS fibers placed in the longitudinal hole in the plates was measured. The holes were filled with various liquid fillers. Measurements were carried out under irradiation by cosmic muons. The method of pum** liquid filler with viscosity more than 10 Pa*s in the strip hole with WLS fiber inside was designed and successfully teste…
▽ More
The light collection of the extruded scintillator strip samples with WLS fibers placed in the longitudinal hole in the plates was measured. The holes were filled with various liquid fillers. Measurements were carried out under irradiation by cosmic muons. The method of pum** liquid filler with viscosity more than 10 Pa*s in the strip hole with WLS fiber inside was designed and successfully tested.
△ Less
Submitted 8 April, 2016;
originally announced April 2016.
-
Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets
Authors:
The HARP Collaboration,
M. Apollonio,
A. Artamonov,
A. Bagulya,
G. Barr,
A. Blondel,
F. Bobisut,
M. Bogomilov,
M. Bonesini,
C. Booth,
S. Borghi,
S. Bunyatov,
J. Burguet-Castell,
M. G. Catanesi,
A. Cervera-Villanueva,
P. Chimenti,
L. Coney,
E. Di Capua,
U. Dore,
J. Dumarchez,
R. Edgecock,
M. Ellis,
F. Ferri,
U. Gastaldi,
S. Giani
, et al. (49 additional authors not shown)
Abstract:
The HARP collaboration has presented measurements of the double-differential pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin nuclear targets. In many applications the extrapolation to long targets is necessary. In this paper the analysis of data taken with long (one interaction length) solid…
▽ More
The HARP collaboration has presented measurements of the double-differential pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin nuclear targets. In many applications the extrapolation to long targets is necessary. In this paper the analysis of data taken with long (one interaction length) solid cylindrical targets made of carbon, tantalum and lead is presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN PS. The secondary pions were produced by beams of protons with momenta 5 GeV/c, 8 GeV/c and 12 GeV/c. The tracking and identification of the produced particles were performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident protons were identified by an elaborate system of beam detectors. Results are obtained for the double-differential yields per target nucleon d2 sigma / dp dtheta. The measurements are compared with predictions of the MARS and GEANT4 Monte Carlo simulations.
△ Less
Submitted 23 December, 2009; v1 submitted 2 September, 2009;
originally announced September 2009.
-
Large-angle production of charged pions with incident pion beams on nuclear targets
Authors:
The HARP Collaboration,
M. Apollonio,
A. Artamonov,
A. Bagulya,
G. Barr,
A. Blondel,
F. Bobisut,
M. Bogomilov,
M. Bonesini,
C. Booth,
S. Borghi,
S. Bunyatov,
J. Burguet-Castell,
M. G. Catanesi,
A. Cervera-Villanueva,
P. Chimenti,
L. Coney,
E. Di Capua,
U. Dore,
J. Dumarchez,
R. Edgecock,
M. Ellis,
F. Ferri,
U. Gastaldi,
S. Giani
, et al. (49 additional authors not shown)
Abstract:
Measurements of the double-differential pi+/- production cross-section in the range of momentum 100 MeV/c <= p <= 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad using pi+/- beams incident on beryllium, aluminium, carbon, copper, tin, tantalum and lead targets are presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN Proton Synchrotron. The seco…
▽ More
Measurements of the double-differential pi+/- production cross-section in the range of momentum 100 MeV/c <= p <= 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad using pi+/- beams incident on beryllium, aluminium, carbon, copper, tin, tantalum and lead targets are presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN Proton Synchrotron. The secondary pions were produced by beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a solid target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections d2sigma/dpdtheta at six incident beam momenta. Data at 3 GeV/c, 5 GeV/c, 8 GeV/c, and 12 GeV/c are available for all targets while additional data at 8.9 GeV/c and 12.9 GeV/c were taken in positive particle beams on Be and Al targets, respectively. The measurements are compared with several generators of GEANT4 and the MARS Monte Carlo simulation.
△ Less
Submitted 1 January, 2010; v1 submitted 9 July, 2009;
originally announced July 2009.
