Showing 1–50 of 80 results for author: Terentjev, E M

Mechanism of pressure sensitive adhesion in nematic elastomers

Authors: Hongye Guo, Mohand O. Saed, Eugene M. Terentjev

Abstract: Nematic liquid crystal elastomers (LCEs) have anomalously high vibration dam**, and it has been assumed this is the cause of their anomalously high pressure-sensitive adhesion (PSA). Here we investigate the mechanism behind this enhanced PSA by first preparing thin adhesive tapes with LCE of varying crosslinking density, characterizing their material and surface properties, and then studying the… ▽ More Nematic liquid crystal elastomers (LCEs) have anomalously high vibration dam**, and it has been assumed this is the cause of their anomalously high pressure-sensitive adhesion (PSA). Here we investigate the mechanism behind this enhanced PSA by first preparing thin adhesive tapes with LCE of varying crosslinking density, characterizing their material and surface properties, and then studying the adhesion characteristics with a standard set of 90-deg peel, lap shear, and probe tack tests. The study confirms that the enhanced PSA is only present in (and due to) the nematic phase of the elastomer, and the strength of bonding takes over 24 hours to fully reach its maximum value. Such a long saturation time is caused by the slow relaxation of local stress and director orientation in nematic domains after pressing against the surface. We confirm this mechanism by showing that a freshly pressed and annealed tape reaches the same maximum bonding strength on cooling, when the returning nematic order is forming in its optimal configuration in the pressed film. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Softening of the Hertz indentation contact in nematic elastomers

Authors: Ameneh Maghsoodi, Mohand O. Saed, Eugene M. Terentjev, Kaushik Bhattacharya

Abstract: Polydomain liquid crystalline (nematic) elastomers have highly unusual mechanical properties, dominated by the dramatically non-linear stress-strain response that reflects stress-induced evolution of domain patterns. Here, we study the classical Hertz indentation problem in such a material. Experimentally, we find that polydomain nematic elastomers display a smaller exponent than the classical 3/2… ▽ More Polydomain liquid crystalline (nematic) elastomers have highly unusual mechanical properties, dominated by the dramatically non-linear stress-strain response that reflects stress-induced evolution of domain patterns. Here, we study the classical Hertz indentation problem in such a material. Experimentally, we find that polydomain nematic elastomers display a smaller exponent than the classical 3/2 in the load vs. indentation depth response. This is puzzling: asymptotically a softer stress-strain response requires a larger exponent at small loads. We resolve this by theory where three regimes are identified -- an initial elastic regime for shallow indentation that is obscured in experiment, an intermediate regime where local domain pattern evolution leads to a smaller scaling in agreement with experiments, and a final stiffening regime where the completion of local domain evolution returns the response to elastic. This three-regime structure is universal, but the intermediate exponent is not. We discuss how our work reveals a new mechanism of enhanced adhesion for pressure-sensitive adhesion of nematic elastomers. △ Less

Submitted 29 April, 2023; originally announced May 2023.

Nucleation of cadherin clusters on cell-cell interfaces

Authors: Neil Ibata, Eugene M. Terentjev

Abstract: Cadherins mediate cell-cell adhesion and help the cell determine its shape and function. Here we study collective cadherin organization and interactions within cell-cell contact areas, and find the cadherin density at which a gas-liquid phase transition occurs, when cadherin monomers begin to aggregate into dense clusters. We use a 2D lattice model of a cell-cell contact area, and coarse-grain to… ▽ More Cadherins mediate cell-cell adhesion and help the cell determine its shape and function. Here we study collective cadherin organization and interactions within cell-cell contact areas, and find the cadherin density at which a gas-liquid phase transition occurs, when cadherin monomers begin to aggregate into dense clusters. We use a 2D lattice model of a cell-cell contact area, and coarse-grain to the continuous number density of cadherin to map the model onto the Cahn-Hilliard coarsening theory. This predicts the density required for nucleation, the characteristic length scale of the process, and the number density of clusters. The analytical predictions of the model are in good agreement with experimental observations of cadherin clustering in epithelial tissues. △ Less

Submitted 10 June, 2022; originally announced June 2022.

Why exercise builds muscles: Titin mechanosensing controls skeletal muscle growth under load

Authors: Neil Ibata, Eugene M. Terentjev

Abstract: Muscles sense internally generated and externally applied forces, responding to these in a coordinated hierarchical manner at different time scales. The center of the basic unit of the muscle, the sarcomeric M-band, is perfectly placed to sense the different types of load to which the muscle is subjected. In particular, the kinase domain (TK) of titin located at the M-band is a known candidate for… ▽ More Muscles sense internally generated and externally applied forces, responding to these in a coordinated hierarchical manner at different time scales. The center of the basic unit of the muscle, the sarcomeric M-band, is perfectly placed to sense the different types of load to which the muscle is subjected. In particular, the kinase domain (TK) of titin located at the M-band is a known candidate for mechanical signaling. Here, we develop the quantitative mathematical model that describes the kinetics of TK-based mechanosensitive signaling, and predicts trophic changes in response to exercise and rehabilitation regimes. First, we build the kinetic model for TK conformational changes under force: opening, phosphorylation, signaling and autoinhibition. We find that TK opens as a metastable mechanosensitive switch, which naturally produces a much greater signal after high-load resistance exercise than an equally energetically costly endurance effort. Next, in order for the model to be stable, give coherent predictions, in particular the lag following the onset of an exercise regime, we have to account for the associated kinetics of phosphate (carried by ATP), and for the non-linear dependence of protein synthesis rates on muscle fibre size. We suggest that the latter effect may occur via the steric inhibition of ribosome diffusion through the sieve-like myofilament lattice. The full model yields a steady-state solution (homeostasis) for muscle cross-sectional area and tension, and a quantitatively plausible hypertrophic response to training as well as atrophy following an extended reduction in tension. △ Less

Submitted 5 May, 2021; v1 submitted 1 February, 2021; originally announced February 2021.

Rheology of Hard Glassy Materials

Authors: Alessio Zaccone, Eugene M. Terentjev

Abstract: Glassy solids may undergo a fluidization (yielding) transition upon deformation whereby the material starts to flow plastically. It has been a matter of debate whether this process is controlled by a specific time scale, from among different competing relaxation/kinetic processes. Here, two constitutive models of cage relaxation are examined within the microscopic model of nonaffine elasto-plastic… ▽ More Glassy solids may undergo a fluidization (yielding) transition upon deformation whereby the material starts to flow plastically. It has been a matter of debate whether this process is controlled by a specific time scale, from among different competing relaxation/kinetic processes. Here, two constitutive models of cage relaxation are examined within the microscopic model of nonaffine elasto-plasticity. One (widely used) constitutive model implies that the overall relaxation rate is dominated by the fastest between the structural ($α$) relaxation rate and the shear-induced relaxation rate. A different model is formulated here which, instead, assumes that the slowest (global) relaxation process controls the overall relaxation. We show that the first model is not compatible with the existence of finite elastic shear modulus for quasistatic (low-frequency) deformation, while the second model is able to describe all key features of deformation of `hard' glassy solids, including the yielding transition, the nonaffine-to-affine plateau crossover, and the rate-stiffening of the modulus. The proposed framework provides an operational way to distinguish between `soft' glasses and `hard' glasses based on the shear-rate dependence of the structural relaxation time. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Journal ref: Journal of Physics: Condensed Matter 32, 395402 (2020)

Rates of transesterication in epoxy-thiol vitrimers

Authors: Alexandra Gablier, Mohand O. Saed, Eugene M. Terentjev

Abstract: Vitrimers, an important subset of dynamically crosslinked polymer networks, have many technological applications for their excellent properties, and the ability to be re-processed through plastic flow above the so-called vitrification temperature. We report a simple and efficient method of generating such adaptive crosslinked networks relying on transesterification for their bond exchange by utili… ▽ More Vitrimers, an important subset of dynamically crosslinked polymer networks, have many technological applications for their excellent properties, and the ability to be re-processed through plastic flow above the so-called vitrification temperature. We report a simple and efficient method of generating such adaptive crosslinked networks relying on transesterification for their bond exchange by utilising the `click' chemistry of epoxy and thiols, which also has the advantage of a low glass transition temperature. We vary the chemical structure of thiol spacers to probe the effects of concentration and the local environment of ester groups on the macroscopic elastic-plastic transition. The thermal activation energy of transesterification bond exchange is determined for each chemical structure, and for a varying concentration of catalyst, establishing the conditions for the optimal, and for the suppressed bond exchange. However, we also discover that the temperature of elastic-plastic transition is strongly affected by the stiffness (dynamic rubber modulus) of the network, with softer networks having a much lower vitrification temperature even when their bond-exchange activation energy is higher. This combination of chemical and physical control factors should help optimise the processability of vitrimer plastics. △ Less

Submitted 10 May, 2020; originally announced May 2020.

Dynamic manipulation of friction in smart textile composites of liquid-crystal elastomers

Authors: Takuya Ohzono, Mohand O. Saed, Youfeng Yue, Yasuo Norikane, Eugene M. Terentjev

Abstract: Smart surfaces that reversibly change the interfacial friction coefficients in response to external stimuli enable a wide range of applications, such as grips, seals, brake pads, packaging films, and fabrics. Here a new concept of such a smart frictional system is reported: a composite film of a plain-weave polyester textile sheet, and a thermo-responsive nematic liquid crystalline elastomer (LCE)… ▽ More Smart surfaces that reversibly change the interfacial friction coefficients in response to external stimuli enable a wide range of applications, such as grips, seals, brake pads, packaging films, and fabrics. Here a new concept of such a smart frictional system is reported: a composite film of a plain-weave polyester textile sheet, and a thermo-responsive nematic liquid crystalline elastomer (LCE). The composite is deployed with retractable micro-undulations of the elastomer inside each weave mesh, enabling dramatic changes of the contact interface with the opposing surface on LCE actuation, which is induced e.g. by a change in temperature (T). At ambient T, the protruding viscoelastic parts of LCE in the nematic phase make contact with the opposing flat surface, resulting in a very high friction. At an elevated T (50C, isotropic phase), the undulations of LCE surface are retracted within the thickness of the textile, and the contacts are limited to small regions around overlap** textile fibers, lowering the friction dramatically. This effect is fully reversible on heating/cooling cycles. The surface undulations are spontaneous, i.e. fabricated without any lithographic or alignment techniques. The present composite opens a new way to practical uses of sheets/films with switchable friction enabled by stimuli-responsive LCEs. △ Less

Submitted 23 December, 2019; originally announced December 2019.

Journal ref: Adv. Mater. Interfaces 2020, 7, 1901996

FliI6-FliJ molecular motor assists with unfolding in the type III secretion export apparatus

Authors: Jiri Kucera, Eugene M. Terentjev

Abstract: The role of rotational molecular motors of the ATP synthase class is integral to the metabolism of cells. Yet the function of FliI6-FliJ complex - homologous to the F1 ATPase motor - within the flagellar export apparatus remains unclear. We use a simple two-state model adapted from studies of linear molecular motors to identify key features of this motor. The two states are the 'locked' ground sta… ▽ More The role of rotational molecular motors of the ATP synthase class is integral to the metabolism of cells. Yet the function of FliI6-FliJ complex - homologous to the F1 ATPase motor - within the flagellar export apparatus remains unclear. We use a simple two-state model adapted from studies of linear molecular motors to identify key features of this motor. The two states are the 'locked' ground state where the FliJ coiled coil filament experiences fluctuations in an asymmetric torsional potential, and a 'free' excited state in which FliJ undergoes rotational diffusion. Michaelis-Menten kinetics was used to treat transitions between these two states, and obtain the average angular velocity of the FliJ filament within the FliI6 stator: ~9.0 rps. The motor was then studied under external counter torque conditions in order to ascertain its maximal power output: Pmax ~42 kBT/s, and the stall torque: ~3 kBT/rad. Two modes of action within the flagellar export apparatus are proposed, in which the motor performs useful work either by continuously 'grinding' through the resistive environment, or by exerting equal and opposite stall force on it. In both cases, the resistance is provided by flagellin subunits entering the flagellar export channel prior to their unfolding. We therefore propose that the function of the FliI6-FliJ complex is to lower the energy barrier and therefore assist in unfolding of the flagellar proteins before feeding them into the transport channel. △ Less

Submitted 19 December, 2019; originally announced December 2019.

Journal ref: Scientific Reports (2020) 10:7127

Siloxane crosslinks with dynamic bond exchange enable shape programming in liquid-crystalline elastomers

Authors: Mohand O. Saed, Eugene M. Terentjev

Abstract: Liquid crystalline elastomers (LCE) undergo reversible shape changes in response to stimuli, which may enable a wide range of smart applications, such as soft robot, adhesive systems or implantable medical devices. Here we introduce new dynamic covalent chemistry based on siloxane equilibrium exchange into the LCE to enable processing (director alignment, remolding, and welding). Unlike, the tradi… ▽ More Liquid crystalline elastomers (LCE) undergo reversible shape changes in response to stimuli, which may enable a wide range of smart applications, such as soft robot, adhesive systems or implantable medical devices. Here we introduce new dynamic covalent chemistry based on siloxane equilibrium exchange into the LCE to enable processing (director alignment, remolding, and welding). Unlike, the traditional siloxane-based LCE, which are produced by a other reaction schemes with irreversible bonds (e.g. hydrosilylation), here we use a much more robust reaction (thiol-acrylate/thiol-ene 'double-click' chemistry) to obtain highly uniform dynamically crosslinked networks. Combining the siloxane crosslinker with click chemistry produces LCEs with tunable properties, low glass transition (-30C), controllable nematic to isotropic transition (32 to 75C), and a very high vitrification temperature (250C). Accordingly, this class of dynamically crosslinked LCE shows unprecedented thermal stability within the working temperature range (-50 to 140C), over many thermal actuation cycles without any creep. Finally, multiple materials sharing the same siloxane exchangeable bonds can be welded into single structures to allow for materials that sequentially and reversibly undergo multiple phase transformations in different sections of the sample. △ Less

Submitted 18 December, 2019; originally announced December 2019.

Journal ref: Scientific Reports (2020) 10:6609

Stimulated binding of polymer chains by narrow tube confinement

Authors: Gillian M. Fraser, Eugene M. Terentjev

Abstract: In biology, there are several processes in which unfolded protein chains are transported along narrow-tube channels. Normally, without such a severe configurational constraint, unfolded polypeptides would not bind to each other. However, when chain entropy is much reduced in the narrow channel, we find that polypeptide chains have a propensity to bind, even if there is no great potential energy ga… ▽ More In biology, there are several processes in which unfolded protein chains are transported along narrow-tube channels. Normally, without such a severe configurational constraint, unfolded polypeptides would not bind to each other. However, when chain entropy is much reduced in the narrow channel, we find that polypeptide chains have a propensity to bind, even if there is no great potential energy gain in doing so. We find the average length of binding m* (the number of monomers at the chain ends that form bonds) and the critical tube diameter at which such constrained binding occurs. We carry out Brownian dynamics simulations of tightly confined chains, demonstrating their binding over the characteristic length m*, changing in tubes of different diameter. △ Less

Submitted 18 September, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Universal kinetics for engagement of mechanosensing pathways in cell adhesion

Authors: Samuel Bell, Anna-Lena Redmann, Eugene M. Terentjev

Abstract: When plated onto substrates, cell morphology and even stem cell differentiation are influenced by the stiffness of their environment. Stiffer substrates give strongly spread (eventually polarized) cells with strong focal adhesions, and stress fibers; very soft substrates give a less developed cytoskeleton, and much lower cell spreading. The kinetics of this process of cell spreading is studied ext… ▽ More When plated onto substrates, cell morphology and even stem cell differentiation are influenced by the stiffness of their environment. Stiffer substrates give strongly spread (eventually polarized) cells with strong focal adhesions, and stress fibers; very soft substrates give a less developed cytoskeleton, and much lower cell spreading. The kinetics of this process of cell spreading is studied extensively, and important universal relationships are established on how the cell area grows with time. Here we study the population dynamics of spreading cells, investigating the characteristic processes involved in cell response to the substrate. We show that unlike the individual cell morphology, this population dynamics does not depend on the substrate stiffness. Instead, a strong activation temperature dependence is observed. Different cell lines on different substrates all have long-time statistics controlled by the thermal activation over a single energy barrier dG=19 kcal/mol, while the early-time kinetics follows a power law $t^5$. This implies that the rate of spreading depends on an internal process of adhesion-mechanosensing complex assembly and activation: the operational complex must have 5 component proteins, and the last process in the sequence (which we believe is the activation of focal adhesion kinase) is controlled by the binding energy dG. △ Less

Submitted 4 October, 2018; v1 submitted 12 March, 2018; originally announced March 2018.

Mechanisms and Rates of Nucleation of Amyloid Fibrils

Authors: Cheng-Tai Lee, Eugene M. Terentjev

Abstract: The classical nucleation theory finds the rate of nucleation proportional to the monomer concentration raised to the power, which is the `critical nucleaus size', ${n_c}$. The implicit assumption, that amyloids nucleate in the same way, has been recently challenged by an alternative two-step mechanism, when the soluble monomers first form a metastable aggregate (micelle), and then undergo conversi… ▽ More The classical nucleation theory finds the rate of nucleation proportional to the monomer concentration raised to the power, which is the `critical nucleaus size', ${n_c}$. The implicit assumption, that amyloids nucleate in the same way, has been recently challenged by an alternative two-step mechanism, when the soluble monomers first form a metastable aggregate (micelle), and then undergo conversion into the conformation rich in $β$-strands that are able to form a stable growing nucleus for the protofilament. Here we put together the elements of extensive knowledge about aggregation and nucleation kinetics, using a specific case of A${β_{1\mathrm{-}42}}$ amyloidogenic peptide for illustration, to find theoretical expressions for the effective rate of amyloid nucleation. We find that at low monomer concentration in solution, and also at low interaction energy between two peptide conformations in the micelle, the nucleation occurs via the classical route. At higher monomer concentration, and a range of other interaction parameters between peptides, the two-step `aggregation-conversion' mechanism of nucleation takes over. In this regime, the effective rate of the process can be interpreted as a power of monomer concentration in a certain range of parameters, however, the exponent is determined by a complicated interplay of interaction parameters and is not related to the minimum size of the growing nucleus (which we find to be ${\sim}$ 7-8 for A${β_{1-42}}$). △ Less

Submitted 7 July, 2017; originally announced July 2017.

Journal ref: J. Chem. Phys. v.147, 105103 (2017)

Reaching to a small target: entropic barriers and rates of specific binding of polymer to substrate

Authors: Samuel Bell, Eugene M. Terentjev

Abstract: This paper considers a broadly biologically relevant question of a chain (such as a protein) binding to a sequence of receptors with matching multiple ligands distributed along the chain. This binding is critical in cell adhesion events, and in protein self-assembly. Using a mean field approximation of polymer dynamics, we first calculate the characteristic binding time for a tethered ligand reach… ▽ More This paper considers a broadly biologically relevant question of a chain (such as a protein) binding to a sequence of receptors with matching multiple ligands distributed along the chain. This binding is critical in cell adhesion events, and in protein self-assembly. Using a mean field approximation of polymer dynamics, we first calculate the characteristic binding time for a tethered ligand reaching for a specific binding site on the surface. This time is determined by two separate entropic effects: an entropic barrier for the chain to be stretched sufficiently to reach the distant target, and a restriction on chain conformations near the surface. We then derive the characteristic time for a sequence of single binding events, and find that it is determined by the `zipper effect', optimizing the sequence of single and multiple binding steps. △ Less

Submitted 28 November, 2017; v1 submitted 22 April, 2017; originally announced April 2017.

Comments: This paper was split into two separate publications, one in Macromolecules the other in Sci. Reports

Oscillations and dam** in the fractional Maxwell materials

Authors: R. H. Pritchard, E. M. Terentjev

Abstract: This paper examines the oscillatory behaviour of complex viscoelastic systems with power law-like relaxation behaviour. Specifically, we use the fractional Maxwell model, consisting of a spring and fractional dashpot in series, which produces a power-law creep behaviour and a relaxation law following the Mittag-Leffler function. The fractional dashpot is characterised by a parameter beta, continuo… ▽ More This paper examines the oscillatory behaviour of complex viscoelastic systems with power law-like relaxation behaviour. Specifically, we use the fractional Maxwell model, consisting of a spring and fractional dashpot in series, which produces a power-law creep behaviour and a relaxation law following the Mittag-Leffler function. The fractional dashpot is characterised by a parameter beta, continuously moving from the pure viscous behaviour when beta=1 to the purely elastic response when beta=0. In this work, we study the general response function and focus on the oscillatory behaviour of a fractional Maxwell system in four regimes: stress impulse, strain impulse, step stress, and driven oscillations. The solutions are presented in a format analogous to the classical oscillator, showing how the fractional nature of relaxation changes the long-time equilibrium behaviour and the short-time transient solutions. We specifically test the critical dam** conditions in the fractional regime, since these have a particular relevance in biomechanics. △ Less

Submitted 2 February, 2017; v1 submitted 9 January, 2017; originally announced January 2017.

Comments: J. or Rheology 2017

Focal adhesion kinase - the reversible molecular mechanosensor

Authors: Samuel Bell, Eugene M. Terentjev

Abstract: Sensors are the first element of the pathways that control the response of cells to their environment. After chemical, the next most important cue is mechanical, and protein complexes that produce or enable a chemical signal in response to a mechanical stimulus are called mechanosensors. There is a sharp distinction between sensing an external force or pressure/tension applied to the cell, and sen… ▽ More Sensors are the first element of the pathways that control the response of cells to their environment. After chemical, the next most important cue is mechanical, and protein complexes that produce or enable a chemical signal in response to a mechanical stimulus are called mechanosensors. There is a sharp distinction between sensing an external force or pressure/tension applied to the cell, and sensing the mechanical stiffness of the environment. We call the first mechanosensitivity of the 1st kind, and the latter mechanosensitivity of the 2nd kind. There are two variants of protein complexes that act as mechanosensors of the 2nd kind: producing either a one-off or a reversible action. The latent complex of TGF-$β$ is an example of the one-off action: on the release of active TGF-$β$ signal, the complex is discarded and needs to be replaced. In contrast, focal adhesion kinase (FAK) in a complex with integrin is a reversible mechanosensor, which initiates the chemical signal in its active phosphorylated conformation, but can spontaneously return to its closed folded conformation. Here we study the physical mechanism of the reversible mechanosensor of the 2nd kind, using FAK as a practical example. We find how the rates of conformation changes depend on the substrate stiffness and the pulling force applied from the cell cytoskeleton. The results compare well with the phenotype observations of cells on different substrates. △ Less

Submitted 2 February, 2017; v1 submitted 18 November, 2016; originally announced November 2016.

Kinetics of fragmentation and dissociation of two-strand protein filaments: Coarse-grained simulations and experiments

Authors: A. Zaccone, I. Terentjev, T. W. Herling, T. P. J. Knowles, A. Aleksandrova, E. M. Terentjev

Abstract: While a significant body of investigations have been focused on the process of protein self-assembly, much less is understood about the reverse process of a filament breaking due to thermal motion into smaller fragments, or depolymerization of subunits from the filament ends. Indirect evidence for actin and amyloid filament fragmentation has been reported, although the phenomenon has never been di… ▽ More While a significant body of investigations have been focused on the process of protein self-assembly, much less is understood about the reverse process of a filament breaking due to thermal motion into smaller fragments, or depolymerization of subunits from the filament ends. Indirect evidence for actin and amyloid filament fragmentation has been reported, although the phenomenon has never been directly observed either experimentally or in simulations. Here we report the direct observation of filament depolymerization and breakup in a minimal, calibrated model of coarse-grained molecular simulation. We quantify the orders of magnitude by which the depolymerization rate from the filament ends $k_\mathrm{off}$ is larger than fragmentation rate $k_{-}$ and establish the law $k_\mathrm{off}/k_- = \exp [( \varepsilon_\| - \varepsilon_\bot) / k_\mathrm{B}T ] = \exp [0.5 \varepsilon / k_\mathrm{B}T ]$, which accounts for the topology and energy of bonds holding the filament together. This mechanism and the order-of-magnitude predictions are well supported by direct experimental measurements of depolymerization of insulin amyloid filaments. △ Less

Submitted 16 September, 2016; originally announced September 2016.

Journal ref: J. Chem. Phys. 145, 105101 (2016)

Nonlinear elasticity of semiflexible filament networks

Authors: Fanlong Meng, Eugene M. Terentjev

Abstract: We develop a continuum theory for equilibrium elasticity of a network of crosslinked semiflexible filaments, spanning the full range between flexible entropy-driven chains to stiff athermal rods. We choose the 3-chain constitutive model over several plausible candidates, and derive analytical expressions for the elastic energy at arbitrary strain, with the corresponding stress-strain relationship.… ▽ More We develop a continuum theory for equilibrium elasticity of a network of crosslinked semiflexible filaments, spanning the full range between flexible entropy-driven chains to stiff athermal rods. We choose the 3-chain constitutive model over several plausible candidates, and derive analytical expressions for the elastic energy at arbitrary strain, with the corresponding stress-strain relationship. The theory fits well to a wide range of experimental data on simple shear in different filament networks, quantitatively matching the differential shear modulus variation with stress, with only two adjustable parameters (which represent the filament stiffness and pre-tension in the network, respectively). The general theory accurately describes the crossover between the positive and negative Poynting effect (normal stress on imposed shear) on increasing the stiffness of filaments forming the network. △ Less

Submitted 8 July, 2016; v1 submitted 13 April, 2016; originally announced April 2016.

Comments: Soft Matter 2016

Stress relaxation, dynamics and plasticity of transient polymer networks

Authors: Fanlong Meng, Robyn H. Pritchard, Eugene M. Terentjev

Abstract: We propose a theoretical framework for dealing with a transient polymer network undergoing small deformations, based on the rate of breaking and re-forming of network crosslinks and the evolving elastic reference state. In this framework, the characteristics of the deformed transient network at microscopic and macroscopic scales are naturally unified. Microscopically, the breakage rate of the cros… ▽ More We propose a theoretical framework for dealing with a transient polymer network undergoing small deformations, based on the rate of breaking and re-forming of network crosslinks and the evolving elastic reference state. In this framework, the characteristics of the deformed transient network at microscopic and macroscopic scales are naturally unified. Microscopically, the breakage rate of the crosslinks is affected by the local force acting on the chain. Macroscopically, we use the classical continuum model for rubber elasticity to describe the structure of the deformation energy, whose reference state is defined dynamically according to when crosslinks are broken and formed. With this, the constitutive relation can be obtained. We study three applications of the theory in uniaxial stretching geometry: for the stress relaxation after an instantaneous step strain is imposed, for the stress overshoot and subsequent decay in the plastic regime when a strain ramp is applied, and for the cycle of stretching and release. We compare the model predictions with experimental data on stress relaxation and stress overshoot in physically bonded thermoplastic elastomers and in vitrimer networks. △ Less

Submitted 2 February, 2016; originally announced February 2016.

F1 rotary motor of ATP synthase is driven by the torsionally-asymmetric drive shaft

Authors: O. Kulish, A. D. Wright, E. M. Terentjev

Abstract: F1F0 ATP synthase (ATPase) either facilitates the synthesis of ATP in the mitochondrial membranes and bacterial inner membranes in a process driven by the proton moving force (pmf), or uses the energy from ATP hydrolysis to pump protons against the concentration gradient across the membrane. ATPase is composed of two rotary motors, F0 and F1, which generate the opposing rotation and compete for co… ▽ More F1F0 ATP synthase (ATPase) either facilitates the synthesis of ATP in the mitochondrial membranes and bacterial inner membranes in a process driven by the proton moving force (pmf), or uses the energy from ATP hydrolysis to pump protons against the concentration gradient across the membrane. ATPase is composed of two rotary motors, F0 and F1, which generate the opposing rotation and compete for control of their shared central gamma-shaft. Here we present a self-consistent physical model of the F1 motor as a simplified two-state Brownian ratchet based on the asymmetry of torsional elastic energy of the coiled-coil gamma-shaft. This stochastic model unifies the physical description of linear and rotary motors and explains the stepped unidirectional rotation of the $γ$-shaft, in agreement with the `binding-change' ideas of Boyer. Substituting the model parameters, all independently known from recent experiments, our model quantitatively reproduces the ATPase operation, e.g. the `no-load' angular velocity is ca. 400~rad/s anticlockwise at 4 mM ATP, in close agreement with experiment. Increasing the pmf torque exerted by F0 can slow, stop and overcome the torque generated by F1, switching from ATP hydrolysis to synthesis at a very low value of `stall torque'. We discuss the matters of the motor efficiency, which is very low if calculated from the useful mechanical work it produces - but is quite high when the `useful outcome' is measured in the number of H+ pushed against the chemical gradient in the F1 ATP-driven operation. △ Less

Submitted 29 January, 2016; originally announced January 2016.

Journal ref: Sci. Rep. v.6, 28180 (2016)

Local structure controls shear and bulk moduli in disordered solids

Authors: M. Schlegel, J. Brujic, E. M. Terentjev, A. Zaccone

Abstract: Paradigmatic model systems, which are used to study the mechanical response of matter, are random networks of point-atoms, random sphere packings, or simple crystal lattices, all of these models assume central-force interactions between particles/atoms. Each of these models differs in the spatial arrangement and the correlations among particles. In turn, this is reflected in the widely different b… ▽ More Paradigmatic model systems, which are used to study the mechanical response of matter, are random networks of point-atoms, random sphere packings, or simple crystal lattices, all of these models assume central-force interactions between particles/atoms. Each of these models differs in the spatial arrangement and the correlations among particles. In turn, this is reflected in the widely different behaviours of the shear (G) and compression (K) elastic moduli. The relation between the macroscopic elasticity as encoded in G, K and their ratio, and the microscopic lattice structure/order, is not understood. We provide a quantitative analytical connection between the local orientational order and the elasticity in model amorphous solids with different internal microstructure, focusing on the two opposite limits of packings (strong excluded-volume) and networks (no excluded-volume). The theory predicts that, in packings, the local orientational order due to excluded-volume causes less nonaffinity (less softness or larger stiffness) under compression than under shear. This leads to lower values of G/K, a well-documented phenomenon which was lacking a microscopic explanation. The theory also provides an excellent one-parameter description of the elasticity of compressed emulsions in comparison with experimental data over a broad range of packing fractions. △ Less

Submitted 13 January, 2016; originally announced January 2016.

Comments: Main text: 7 pages, 2 figures, Supplementary information: 1 document of 5 pages, Corresponding author: A. Zaccone

Journal ref: Scientific Reports 6, 18724 (2016)

Polymer glass transition occurs at the marginal rigidity point with connectivity z*=4

Authors: Anna Lappala, Alessio Zaccone, Eugene M. Terentjev

Abstract: We re-examine the physical origin of the polymer glass transition from the point of view of marginal rigidity, which is achieved above a certain number of intermolecular contacts. In the case of polymer chains in a melt / poor solvent, each monomer has two neighbors bound by covalent bonds and also a number of central-force contacts modelled by the Lennard-Jones (LJ) potential. We find that when t… ▽ More We re-examine the physical origin of the polymer glass transition from the point of view of marginal rigidity, which is achieved above a certain number of intermolecular contacts. In the case of polymer chains in a melt / poor solvent, each monomer has two neighbors bound by covalent bonds and also a number of central-force contacts modelled by the Lennard-Jones (LJ) potential. We find that when the average number of contacts per monomer (covalent and non-covalent) exceeds the critical value z*=4, the system becomes solid and the dynamics arrested - a state that we declare the glass. Coarse-grained Brownian dynamics simulations show that at sufficient strength of LJ attraction (which effectively represents the depth of quenching, or the quality of solvent) the polymer globule indeed crosses the threshold of z*=4, and does become a glass. We verify this by showing the distinction between the `liquid' polymer droplet at z<z*, which changes shape and adopts the spherical conformation in equilibrium, and the `glassy' droplet at z>z*, which retains its shape frozen at the moment of z* crossover. These results provide a robust working criterion to tell the liquid apart from the glass for the linear polymers. △ Less

Submitted 8 July, 2016; v1 submitted 12 November, 2015; originally announced November 2015.

Mechanosensitivity of the IInd kind: TGFb mechanism of cell sensing the substrate stiffness

Authors: Max Cockerill, Michelle K. Rigozzi, Eugene M. Terentjev

Abstract: Cells can sense forces applied to them, but also the stiffness of their environment. These are two different phenomena, and here we investigate the mechanosensitivity of the IInd kind: how the cell can measure an elastic modulus at a single point of adhesion -- and how the cell can receive and interpret the chemical signal released from the sensor. Our model uses the example of large latent comple… ▽ More Cells can sense forces applied to them, but also the stiffness of their environment. These are two different phenomena, and here we investigate the mechanosensitivity of the IInd kind: how the cell can measure an elastic modulus at a single point of adhesion -- and how the cell can receive and interpret the chemical signal released from the sensor. Our model uses the example of large latent complex of TGFb as a sensor. Stochastic theory gives the rate of breaking of latent complex, which initiates the signaling feedback loop after the active TGFb release and leads to a change of cell phenotype driven by the smooth muscle actin. We investigate the dynamic and steady-state behaviours of the model, comparing them with experiments. In particular, we analyse the timescale of approach to the steady state, the stability of the non-linear dynamical system, and how the steady-state concentrations of the key markers vary depending on the elasticity of the substrate. We discover a crossover region for values of substrate elasticity closely corresponding to that of the fibroblast to myofibroblast transition. We suggest that the cell could actively vary the parameters of its dynamic feedback loop to `choose' the position of the transition region and the range of substrate elasticity that it can detect. In this way, the theory offers the unifying mechanism for a variety of phenomena, such as the myofibroblast conversion in fibrosis of wounds and lungs and smooth muscle cell dysfunction in cardiac disease. △ Less

Submitted 14 July, 2015; originally announced July 2015.

Journal ref: PLoS ONE 10:e0139959 (2015)

Fragmentation and depolymerization of non-covalently bonded filaments

Authors: A. Zaccone, I. Terentjev, L. DiMichele, E. M. Terentjev

Abstract: Protein molecules often self-assemble by means of non-covalent physical bonds to form extended filaments, such as amyloids, F-actin, intermediate filaments, and many others. The kinetics of filament growth is limited by the disassembly rate, at which inter-protein bonds break due to the thermal motion. Existing models often assume that the thermal dissociation of subunits occurs uniformly along th… ▽ More Protein molecules often self-assemble by means of non-covalent physical bonds to form extended filaments, such as amyloids, F-actin, intermediate filaments, and many others. The kinetics of filament growth is limited by the disassembly rate, at which inter-protein bonds break due to the thermal motion. Existing models often assume that the thermal dissociation of subunits occurs uniformly along the filament, or even preferentially in the middle, while the well-known propensity of F-actin to depolymerize from one end is mediated by biochemical factors. Here, we show for a very general (and generic) model, using Brownian dynamics simulations and theory, that the breakup location along the filament is strongly controlled by the asymmetry of the binding force about the minimum, as well as by the bending stiffness of the filament. We provide the basic connection between the features of the interaction potential between subunits and the breakup topology. With central-force (that is, fully flexible) bonds, the breakup rate is always maximum in the middle of the chain, whereas for semiflexible or stiff filaments this rate is either a minimum in the middle or flat. The emerging framework provides a unifying understanding of biopolymer fragmentation and depolymerization and recovers earlier results in its different limits. △ Less

Submitted 22 March, 2015; originally announced March 2015.

Journal ref: Journal of Chemical Physics 142, 114905 (2015)

Microscopic origin of nonlinear non-affine deformation and stress overshoot in bulk metallic glasses

Authors: A. Zaccone, P. Schall, E. M. Terentjev

Abstract: The atomic theory of elasticity of amorphous solids, based on the nonaffine response formalism, is extended into the nonlinear stress-strain regime by coupling with the underlying irreversible many-body dynamics. The latter is implemented in compact analytical form using a qualitative method for the many-body Smoluchowski equation. The resulting nonlinear stress-strain (constitutive) relation is v… ▽ More The atomic theory of elasticity of amorphous solids, based on the nonaffine response formalism, is extended into the nonlinear stress-strain regime by coupling with the underlying irreversible many-body dynamics. The latter is implemented in compact analytical form using a qualitative method for the many-body Smoluchowski equation. The resulting nonlinear stress-strain (constitutive) relation is very simple, with few fitting parameters, yet contains all the microscopic physics. The theory is successfully tested against experimental data on metallic glasses, and it is able to reproduce the ubiquitous feature of stress-strain overshoot upon varying temperature and shear rate. A clear atomic-level interpretation is provided for the stress overshoot, in terms of the competition between the elastic instability caused by nonaffine deformation of the glassy cage and the stress buildup due to viscous dissipation. △ Less

Submitted 13 October, 2014; originally announced October 2014.

Comments: Physical Review B Rapid Comm., in press

Journal ref: Phys. Rev. B 90, 140203(R) 2014

Arrested spinodal decomposition in polymer brush collapsing in poor solvent

Authors: Anna Lappala, Saahil Mendiratta, Eugene M. Terentjev

Abstract: We study the Brownian dynamics of flexible and semiflexible polymer chains densely grafted on a flat substrate, upon rapid quenching of the system when the quality of solvent becomes poor and chains attempt collapse into a globular state. The collapse process of such a polymer brush differs from individual chains, both in its kinetics and its structural morphology. We find that the resulting colla… ▽ More We study the Brownian dynamics of flexible and semiflexible polymer chains densely grafted on a flat substrate, upon rapid quenching of the system when the quality of solvent becomes poor and chains attempt collapse into a globular state. The collapse process of such a polymer brush differs from individual chains, both in its kinetics and its structural morphology. We find that the resulting collapsed brush does not form a homogeneous dense layer, in spite of all chain monomers equally attracting each other via a model Lennard-Jones potential. Instead, a very distinct inhomogeneous density distribution in the plane forms, with a characteristic length scale dependent on the quenching depth (or equivalently, the strength of monomer attraction) and the geometric parameters of the brush. This structure is identical to the spinodal-decomposition structure, however, due to the grafting constraint we find no subsequent coarsening: the established random bundling with characteristic periodicity remains as the apparently equilibrium structure. We compare this finding with a recent field-theoretical model of bundling in a semiflexible polymer brush. △ Less

Submitted 22 September, 2014; originally announced September 2014.

Role of the potential landscape on the single-file diffusion through channels

Authors: S. D. Goldt, E. M. Terentjev

Abstract: Transport of colloid particles through narrow channels is ubiquitous in cell biology as well as becoming increasingly important for microfluidic applications or targeted drug delivery. Membrane channels in cells are useful models for artificial designs because of their high efficiency, selectivity and robustness to external fluctuations. Here we model the passive channels that let cargo simply dif… ▽ More Transport of colloid particles through narrow channels is ubiquitous in cell biology as well as becoming increasingly important for microfluidic applications or targeted drug delivery. Membrane channels in cells are useful models for artificial designs because of their high efficiency, selectivity and robustness to external fluctuations. Here we model the passive channels that let cargo simply diffuse through them, affected by a potential profile along the way. Passive transporters achieve high levels of efficiency and specificity from binding interactions with the cargo inside the channel. This however leads to a paradox: why should channels which are so narrow that they are blocked by their cargo evolve to have binding regions for their cargo if that will effectively block them? Using Brownian dynamics simulations, we show that different potentials, notably symmetric, increase the flux through narrow passive channels -- and investigate how shape and depth of potentials influence the flux. We find that there exist optimal depths for certain potential shapes and that it is most efficient to apply a small force over an extended region of the channel. On the other hand, having several spatially discrete binding pockets will not alter the flux significantly. We also explore the role of many-particle effects arising from pairwise particle interactions with their neighbours and demonstrate that the relative changes in flux can be accounted for by the kinetics of the absorption reaction at the end of the channel. △ Less

Submitted 15 September, 2014; originally announced September 2014.

Journal ref: The Journal of Chemical Physics 141, 224901 (2014)

How cells feel: stochastic model for a molecular mechanosensor

Authors: Matteo Escude, Michelle K. Rigozzi, Eugene M. Terentjev

Abstract: Understanding mechanosensitivity, i.e. how cells sense the stiffness of their environment is very important, yet there is a fundamental difficulty in understanding its mechanism: to measure an elastic modulus one requires two points of application of force - a measuring and a reference point. The cell in contact with substrate has only one (adhesion) point to work with, and thus a new method of me… ▽ More Understanding mechanosensitivity, i.e. how cells sense the stiffness of their environment is very important, yet there is a fundamental difficulty in understanding its mechanism: to measure an elastic modulus one requires two points of application of force - a measuring and a reference point. The cell in contact with substrate has only one (adhesion) point to work with, and thus a new method of measurement needs to be invented. The aim of this theoretical work is to develop a self-consistent physical model for mechanosensitivity, a process by which a cell detects the mechanical stiffness of its environment (e.g. a substrate it is attached to via adhesion points) and generates an appropriate chemical signaling to remodel itself in response to this environment. The model uses the molecular mechanosensing complex of latent TGF-$β$ attached to the adhesion point as the biomarker. We show that the underlying Brownian motion in the substrate is the reference element in the measuring process. The model produces the closed expression for the rate of release of active TGF-$β$, which depends on the substrate stiffness and the pulling force coming from the cell in a subtle and non-trivial way. It is consistent with basic experimental data showing an increase in signal for stiffer substrates and higher pulling forces. In addition, we find that for each cell there is a range of stiffness where a homeostatic configuration of the cell can be achieved, outside of which the cell either relaxes its cytoskeletal forces and detaches from the very weak substrate, or generates an increasingly strong pulling force through stress fibers with a positive feedback loop on very stiff substrates. In this way, the theory offers the underlying mechanism for the myofibroblast conversion in wound healing and smooth muscle cell dysfunction in cardiac disease. △ Less

Submitted 28 December, 2014; v1 submitted 31 October, 2013; originally announced October 2013.

Journal ref: Biophys. J. 106, 124-133 (2014)

Bundling in brushes of directed and semiflexible polymers

Authors: Panayotis Benetatos, Eugene M. Terentjev, Annette Zippelius

Abstract: We explore the effect of an attractive interaction between parallel-aligned polymers, which are perpendicularly grafted on a substrate. Such an attractive interaction could be due to, e.g., reversible cross-links. The competition between permanent grafting favoring a homogeneous state of the polymer brush and the attraction, which tends to induce in-plane collapse of the aligned polymers, gives ri… ▽ More We explore the effect of an attractive interaction between parallel-aligned polymers, which are perpendicularly grafted on a substrate. Such an attractive interaction could be due to, e.g., reversible cross-links. The competition between permanent grafting favoring a homogeneous state of the polymer brush and the attraction, which tends to induce in-plane collapse of the aligned polymers, gives rise to an instability of the homogeneous phase to a bundled state. In this latter state the in-plane translational symmetry is spontaneously broken and the density is modulated with a finite wavelength, which is set by the length scale of transverse fluctuations of the grafted polymers. We analyze the instability for two models of aligned polymers: directed polymers with a line tension and weakly bending chains with a bending stiffness. △ Less

Submitted 5 October, 2013; v1 submitted 28 July, 2013; originally announced July 2013.

Comments: 7 pages, 5 figures, final version as published in PRE

Journal ref: Phys. Rev. E 88, 042601 (2013)

Ratcheted diffusion transport through crowded nanochannels

Authors: Anna Lappala, Alessio Zaccone, Eugene M. Terentjev

Abstract: The problem of transport through nanochannels is one of the major questions in cell biology, with a wide range of applications. Brownian ratchets are fundamental in various biochemical processes, and are roughly divided into two categories: active (usually ATP-powered) molecular motors and passive constructions with a directional bias, where the transport is driven by thermal motion. In this paper… ▽ More The problem of transport through nanochannels is one of the major questions in cell biology, with a wide range of applications. Brownian ratchets are fundamental in various biochemical processes, and are roughly divided into two categories: active (usually ATP-powered) molecular motors and passive constructions with a directional bias, where the transport is driven by thermal motion. In this paper we discuss the latter process, of spontaneous translocation of molecules (Brownian particles) by ratcheted diffusion with no external energy input: a problem relevant for protein translocation along bacterial flagella or injectosome complex, or DNA translocation by bacteriophages. We use molecular dynamics simulations and statistical theory to identify two regimes of transport: at low rate of particles injection into the channel the process is controlled by the individual diffusion towards the open end (the first passage problem), while at a higher rate of injection the crowded regime sets in. In this regime the particle density in the channel reaches a constant saturation level and the resistance force increases substantially, due to the osmotic pressure build-up. To achieve a steady-state transport, the apparatus that injects new particles into a crowded channel has to operate with an increasing power consumption, proportional to the length of the channel and the required rate of transport. The analysis of resistance force, and accordingly -- the power required to inject the particles into a crowded channel to oversome its clogging, is also relevant for many microfluidics applications. △ Less

Submitted 22 July, 2013; originally announced July 2013.

Disorder-assisted melting and the glass transition in amorphous solids

Authors: Alessio Zaccone, Eugene M. Terentjev

Abstract: The mechanical response of solids depends on temperature because the way atoms and molecules respond collectively to deformation is affected at various levels by thermal motion. This is a fundamental problem of solid state science and plays a crucial role in metallurgy, aerospace engineering, energy. In glasses the vanishing of rigidity upon increasing temperature is the reverse process of the gla… ▽ More The mechanical response of solids depends on temperature because the way atoms and molecules respond collectively to deformation is affected at various levels by thermal motion. This is a fundamental problem of solid state science and plays a crucial role in metallurgy, aerospace engineering, energy. In glasses the vanishing of rigidity upon increasing temperature is the reverse process of the glass transition. It remains poorly understood due to the disorder leading to nontrivial (nonaffine) components in the atomic displacements. Our theory explains the basic mechanism of the melting transition of amorphous (disordered) solids in terms of the lattice energy lost to this nonaffine motion, compared to which thermal vibrations turn out to play only a negligible role. It predicts the square-root vanishing of the shear modulus $G\sim\sqrt{T_{c}-T}$ at criticality observed in the most recent numerical simulation study. The theory is also in good agreement with classic data on melting of amorphous polymers (for which no alternative theory can be found in the literature) and offers new opportunities in materials science. △ Less

Submitted 10 December, 2012; originally announced December 2012.

Theory of molecular crowding in Brownian hard-sphere liquids with application to the polymer coil-globule transition

Authors: Alessio Zaccone, Eugene M. Terentjev

Abstract: We derive an analytical pair potential of mean force for Brownian molecules in the liquid-state. Our approach accounts for many-particle correlations of crowding particles of the liquid, and for diffusive transport across the spatially modulated local density of crowders in the dense environment. Specializing on the limit of equal-size particles, we show that this diffusive transport leads to addi… ▽ More We derive an analytical pair potential of mean force for Brownian molecules in the liquid-state. Our approach accounts for many-particle correlations of crowding particles of the liquid, and for diffusive transport across the spatially modulated local density of crowders in the dense environment. Specializing on the limit of equal-size particles, we show that this diffusive transport leads to additional density- and structure-dependent terms in the interaction potential, and to a much stronger attraction (by a factor ~4 at average volume fraction of crowders 0.25) than in the standard depletion interaction where the diffusive effects are neglected. As an illustration of the theory, we use it to study the size of a polymer chain in a solution of inert crowders. Even in the case of athermal background solvent, when a classical chain should be fully swollen, we find a sharp coil-globule transition of the ideal chain collapsing at a critical value of the crowder volume fraction ~0.145. △ Less

Submitted 20 June, 2012; originally announced June 2012.

Journal ref: Phys. Rev. E 85, 061202 (2012)

Kramers rate theory of ionization and dissociation of bound states

Authors: Alessio Zaccone, Eugene M. Terentjev

Abstract: Calculating the microscopic dissociation rate of a bound state, such as a classical diatomic molecule, has been difficult so far. The problem was that standard theories require an energy barrier over which the bound particle (or state) escapes into the preferred low-energy state. This is not the case when the long-range repulsion responsible for the barrier is either absent or screened (as in Coop… ▽ More Calculating the microscopic dissociation rate of a bound state, such as a classical diatomic molecule, has been difficult so far. The problem was that standard theories require an energy barrier over which the bound particle (or state) escapes into the preferred low-energy state. This is not the case when the long-range repulsion responsible for the barrier is either absent or screened (as in Cooper pairs, ionized plasma, or biomolecular complexes). We solve this classical problem by accounting for entropic memory at the microscopic level. The theory predicts dissociation rates for arbitrary potentials and is successfully tested on the example of plasma, where it yields an estimate of ionization in the core of Sun in excellent agreement with experiments. In biology, the new theory accounts for crowding in receptor-ligand kinetics and protein aggregation. △ Less

Submitted 15 February, 2012; originally announced February 2012.

Journal ref: Phys. Rev. Lett. 108, 038302 (2012)

Network disorder and nonaffine deformations in marginal solids

Authors: Alessio Zaccone, Jamie R. Blundell, Eugene M. Terentjev

Abstract: The most profound effect of disorder on the elastic response of solids is the nonaffinity of local displacements whereby the atoms (particles, network junctions) do not simply follow the macroscopic strain, as they do in perfect crystals, but undergo additional displacements which result in a softening of response. Whether disorder can produce further effects has been an open and difficult questio… ▽ More The most profound effect of disorder on the elastic response of solids is the nonaffinity of local displacements whereby the atoms (particles, network junctions) do not simply follow the macroscopic strain, as they do in perfect crystals, but undergo additional displacements which result in a softening of response. Whether disorder can produce further effects has been an open and difficult question due to our poor understanding of nonaffinity. Here we present a systematic analysis of this problem by allowing both network disorder and lattice coordination to vary continuously under account of nonaffinity. In one of its limits, our theory, supported by numerical simulations, shows that in lattices close to the limit of mechanical stability the elastic response stiffens proportionally to the degree of disorder. This result has important implications in a variety of areas: from understanding the glass transition problem to the mechanics of biological networks such as the cytoskeleton. △ Less

Submitted 11 January, 2012; originally announced January 2012.

Journal ref: Physical Review B 84, 174119 (2011)

A constrained random-force model for weakly bending semiflexible polymers

Authors: Panayotis Benetatos, Eugene M. Terentjev

Abstract: The random-force (Larkin) model of a directed elastic string subject to quenched random forces in the transverse directions has been a paradigm in the statistical physics of disordered systems. In this brief note, we investigate a modified version of the above model where the total transverse force along the polymer contour and the related total torque, in each realization of disorder, vanish. We… ▽ More The random-force (Larkin) model of a directed elastic string subject to quenched random forces in the transverse directions has been a paradigm in the statistical physics of disordered systems. In this brief note, we investigate a modified version of the above model where the total transverse force along the polymer contour and the related total torque, in each realization of disorder, vanish. We discuss the merits of adding these constraints and show that they leave the qualitative behavior in the strong stretching regime unchanged, but they reduce the effects of the random force by significant numerical prefactors. We also show that a transverse random force effectively makes the filament softer to compression by inducing undulations. We calculate the related linear compression coefficient in both the usual and the constrained random force model. △ Less

Submitted 17 July, 2011; originally announced July 2011.

Comments: 4 pages, 1 figure, accepted for publication in PRE

Journal ref: Phys. Rev. E 84, 022801 (2011)

Thermodynamically Stable Blue Phases

Authors: F. Castles, S. M. Morris, E. M. Terentjev, H. J. Coles

Abstract: We show theoretically that flexoelectricity stabilizes blue phases in chiral liquid crystals. Induced internal polarization reduces the elastic energy cost of splay and bend deformations surrounding singular lines in the director field. The energy of regions of double twist is unchanged. This in turn reduces the free energy of the blue phase with respect to that of the chiral nematic phase, leadin… ▽ More We show theoretically that flexoelectricity stabilizes blue phases in chiral liquid crystals. Induced internal polarization reduces the elastic energy cost of splay and bend deformations surrounding singular lines in the director field. The energy of regions of double twist is unchanged. This in turn reduces the free energy of the blue phase with respect to that of the chiral nematic phase, leading to stability over a wider temperature range. The theory explains the discovery of large temperature range blue phases in highly flexoelectric "bimesogenic" and "bent-core" materials, and predicts how this range may be increased further. △ Less

Submitted 28 January, 2011; originally announced January 2011.

Comments: 4 pages, 2 figures

Journal ref: Phys. Rev. Lett. 104, 157801 (2010)

Stretching semiflexible filaments with quenched disorder

Authors: Panayotis Benetatos, Eugene M. Terentjev

Abstract: We study the effect of quenched randomness in the arc-length dependent spontaneous curvature of a wormlike chain under tension. In the weakly bending approximation in two dimensions, we obtain analytic results for the force-elongation curve and the width of transverse fluctuations. We compare quenched and annealed disorder and conclude that the former cannot always be reduced to a simple change in… ▽ More We study the effect of quenched randomness in the arc-length dependent spontaneous curvature of a wormlike chain under tension. In the weakly bending approximation in two dimensions, we obtain analytic results for the force-elongation curve and the width of transverse fluctuations. We compare quenched and annealed disorder and conclude that the former cannot always be reduced to a simple change in the stiffness of the pure system. We also discuss the effect of a random transverse force on the stretching response of a wormlike chain without spontaneous curvature. △ Less

Submitted 10 November, 2010; v1 submitted 18 June, 2010; originally announced June 2010.

Comments: 5 pages, minor changes, added references, final version as published in PRE

Journal ref: Phys. Rev. E 82, 050802(R) (2010)

Stretching weakly bending filaments with spontaneous curvature in two dimensions

Authors: Panayotis Benetatos, Eugene M. Terentjev

Abstract: Some important biomolecules (for instance, bacterial FtsZ and eukaryotic DNA) are known to posses spontaneous (intrinsic) curvature. Using a simple extension of the wormlike chain model, we study the response of a weakly bending filament in two dimensions to a pulling force applied at its ends (a configuration common in classical in-vitro experiments and relevant to several in-vivo cell cases).… ▽ More Some important biomolecules (for instance, bacterial FtsZ and eukaryotic DNA) are known to posses spontaneous (intrinsic) curvature. Using a simple extension of the wormlike chain model, we study the response of a weakly bending filament in two dimensions to a pulling force applied at its ends (a configuration common in classical in-vitro experiments and relevant to several in-vivo cell cases). The spontaneous curvature of such a chain or filament can in general be arc-length dependent and we study a case of sinusoidal variation, from which an arbitrary case can be reconstructed via Fourier transformation. We obtain analytic results for the force-extension relationship and the width of transverse fluctuations. We show that spontaneous-curvature undulations can affect the force-extension behavior even in relatively flexible filaments with a persistence length smaller than the contour length. △ Less

Submitted 24 March, 2010; v1 submitted 18 September, 2009; originally announced September 2009.

Comments: 7 pages, 4 figures; typos corrected, minor changes, final version as published in PRE

Journal ref: Phys. Rev. E 81 (2010) 031802

Strength of nanotubes, filaments and nanowires from sonication-induced scission

Authors: Y. Y. Huang, T. P. J. Knowles, E. M. Terentjev

Abstract: We propose a simple model to describe the cavitation-induced breakage of mesoscale filaments during their sonication in solution. The model predicts a limiting length below which scission no longer occurs. This characteristic length is a function of the tensile strength and diameter of the filament, as well as the solvent viscosity and cavitation parameters. We show that the model predicts accur… ▽ More We propose a simple model to describe the cavitation-induced breakage of mesoscale filaments during their sonication in solution. The model predicts a limiting length below which scission no longer occurs. This characteristic length is a function of the tensile strength and diameter of the filament, as well as the solvent viscosity and cavitation parameters. We show that the model predicts accurately experimental results for materials ranging from carbon nanotubes to protein fibrils, and discuss the use of sonication-induced breakage as a probe for the strength of nanostructures. △ Less

Submitted 17 July, 2009; originally announced July 2009.

Polysiloxane surfactants for the dispersion of carbon nanotubes in non-polar organic solvents

Authors: Y. Ji, Y. Y. Huang, A. R. Tajbakhsh, E. M. Terentjev

Abstract: We develop two new amphiphilic molecules that are shown to act as efficient surfactants for carbon nanotubes in non-polar organic solvents. The active conjugated groups, which are highly attracted to graphene nanotube surface, are based on pyrene and porphyrin. We show that relatively short (C18) carbon tails are insufficient to provide stabilization. As our ultimate aim is to disperse and stabi… ▽ More We develop two new amphiphilic molecules that are shown to act as efficient surfactants for carbon nanotubes in non-polar organic solvents. The active conjugated groups, which are highly attracted to graphene nanotube surface, are based on pyrene and porphyrin. We show that relatively short (C18) carbon tails are insufficient to provide stabilization. As our ultimate aim is to disperse and stabilize nanotubes in siloxane matrix (polymer and crosslinked elastomer), both surfactant molecules were made with long siloxane tails to facilitate solubility and steric stabilization. We show that pyrene-siloxane surfactant is very effective in dispersing multi-wall nanotubes, while the porphyrin-siloxane is making single-wall nanotubes soluble, both in petroleum ether and in siloxane matrix. △ Less

Submitted 17 July, 2009; originally announced July 2009.

Comments: to appear in: Langmuir 2009

Buckling of semiflexible filaments under compression

Authors: J. R. Blundell, E. M. Terentjev

Abstract: A model for filament buckling at finite temperatures is presented. Starting from the classical worm-like chain model under constant compression, we use a mean-field approach for filament inextensibility to find the complete partition function. We find that there is a simple interpolation formula that describes the free energy of chains or filaments as a function of end-to-end separation, which s… ▽ More A model for filament buckling at finite temperatures is presented. Starting from the classical worm-like chain model under constant compression, we use a mean-field approach for filament inextensibility to find the complete partition function. We find that there is a simple interpolation formula that describes the free energy of chains or filaments as a function of end-to-end separation, which spans the whole range of filament stiffnesses. Using this formula we study the buckling transition of semiflexible filaments and find that kinetics plays an important role. We propose that the filament buckling is essentially the first order transition governed by the kinetics of esca** a local free energy minimum. A simple model for the kinetics is put forward, which shows the critical buckling force for a filament is reduced by a fraction that has a universal scaling with temperature with an exponent 0.56. △ Less

Submitted 19 February, 2009; v1 submitted 12 February, 2009; originally announced February 2009.

Affine model of stress stiffening in semiflexible filament networks

Authors: J. R. Blundell, E. M. Terentjev

Abstract: We present a revised theoretical study of the affine assumption applied to semiflexible networks. Drawing on simple models of semiflexible worm-like chains we derive an expression for the probability distribution of crosslink separations valid at all separations. This accounts for both entropic and mechanical filament stretching. From this we obtain the free energy density of such networks expli… ▽ More We present a revised theoretical study of the affine assumption applied to semiflexible networks. Drawing on simple models of semiflexible worm-like chains we derive an expression for the probability distribution of crosslink separations valid at all separations. This accounts for both entropic and mechanical filament stretching. From this we obtain the free energy density of such networks explicitly as a function of applied strain. We are therefore able to calculate the elastic moduli of such networks for any imposed strain or stress. We find that accounting for the distribution of cross-link separations destroys the simple scaling of modulus with stress that is well known in single chains, and that such scaling is sensitive to the mechanical stretch modulus of individual filaments. We compare this model to three experimental data sets, for networks of different types of filaments, and find that a properly treated affine model can successfully account for the data. We find that for networks of stiffer filaments, such as F-actin, to fit data we require a much smaller effective persistence length than usually assumed to be characteristic of this filament type. We propose that such an effectively reduced rigidity of filaments might be a consequence of network formation. △ Less

Submitted 29 August, 2008; originally announced August 2008.

Comments: 11 pages, 9 figures

Aging and metastability of monoglycerides in hydrophobic solutions

Authors: C. H. Chen, E. M. Terentjev

Abstract: The aging of aggregated structures of monoglycerides in hydrophobic medium is described by a set of different techniques. Polarized microscopy was used to study the mesomorphic behavior as a function of time. Differential scanning calorimetry was utilized to quantitatively monitor changes in the latent heat in different phase transformations that take place in the aging system. Infrared spectros… ▽ More The aging of aggregated structures of monoglycerides in hydrophobic medium is described by a set of different techniques. Polarized microscopy was used to study the mesomorphic behavior as a function of time. Differential scanning calorimetry was utilized to quantitatively monitor changes in the latent heat in different phase transformations that take place in the aging system. Infrared spectroscopy was applied to detect the formation of hydrogen bonding between surfactants. The X-ray diffraction patterns fingerprinted the molecular arrangement in different emerging phases. Infra-red spectroscopy was used to monitor the state of hydrogen bonding in the system. We conclude that in both inverted-lamellar and sub-alpha crystalline phases, monoglyceride molecules inevitably lose their emulsified ability in the hydrophobic solutions through the gradual change in hydrogen bonding patterns. On aging, the formation of intermolecular hydrogen bonding between glycerol groups causes the segregation of chiral (D and L) isomers within the bilayers. Therefore all structures were eventually forced to reorder into the beta-crystalline state, distinguishing between the D and L layers. Accordingly, the highly ordered packing of aged structures weakened the emulsifying ability and finally leaded the collapse of the percolating gel network. △ Less

Submitted 22 August, 2008; originally announced August 2008.

Phase behavior of C18 monoglyceride in hydrophobic solutions

Authors: C. H. Chen, I. Van Damme, E. M. Terentjev

Abstract: We apply a set of different techniques to analyze the physical properties and phase transitions of monoglycerides (MG) in oil. In contrast to many studies of MG in water or aqueous systems, we find a significant difference in the phase structure at different concentrations and temperatures. By adding small quantities of water to our base MG/oil systems we test the effect of hydration of surfacta… ▽ More We apply a set of different techniques to analyze the physical properties and phase transitions of monoglycerides (MG) in oil. In contrast to many studies of MG in water or aqueous systems, we find a significant difference in the phase structure at different concentrations and temperatures. By adding small quantities of water to our base MG/oil systems we test the effect of hydration of surfactant head-groups, and its effect on the phase behavior. The phase diagrams are determined by calorimetry and their universal features are recorded under different conditions. Two ordered phases are reported: the inverse lamellar gel phase and the sub-alpha crystalline gel phase. This sequence is very different from the structures in MG/water; its most striking feature is the establishing of a 2D densely packed hexagonal order of glycerol heads in the middle of inverse lamellar bilayers. Rheology was examined through temperature scans to demonstrate the gelation phenomenon, which starts from the onset of the lamellar phase during the cooling/ordering process. △ Less

Submitted 22 August, 2008; originally announced August 2008.

Critical fluctuations and random-anisotropy glass transition in nematic elastomers

Authors: G. Feio, J. L. Figueirinhas, A. R. Tajbakhsh, E. M. Terentjev

Abstract: We carry out a detailed deuterium NMR study of local nematic ordering in polydomain nematic elastomers. This system has a close analogy to the random-anisotropy spin glass. We find that, in spite of the quadrupolar nematic symmetry in 3-dimensions requiring a first-order transition, the order parameter in the quenched ``nematic glass'' emerges via a continuous phase transition. In addition, by a… ▽ More We carry out a detailed deuterium NMR study of local nematic ordering in polydomain nematic elastomers. This system has a close analogy to the random-anisotropy spin glass. We find that, in spite of the quadrupolar nematic symmetry in 3-dimensions requiring a first-order transition, the order parameter in the quenched ``nematic glass'' emerges via a continuous phase transition. In addition, by a careful analysis of the NMR line shape, we deduce that the local director fluctuations grow in a critical manner around the transition point. This could be the experimental evidence for the Aizenman-Wehr theorem about the quenched impurities changing the order of discontinuous transition. △ Less

Submitted 12 January, 2008; originally announced January 2008.

Non-linear dynamics of absorption and photo-bleaching of dyes

Authors: Francesca Serra, Eugene M. Terentjev

Abstract: The celebrated Lambert-Beer law of light absorption in photochromic media is only valid at low intensities of incident light and low concentration of chromophore. Here we address the generic problem of photo-absorption dynamics, experimentally studying the case of azobenzene isomerization. We show that the non-linear regime is very common and easy to achieve in many practical situations, especia… ▽ More The celebrated Lambert-Beer law of light absorption in photochromic media is only valid at low intensities of incident light and low concentration of chromophore. Here we address the generic problem of photo-absorption dynamics, experimentally studying the case of azobenzene isomerization. We show that the non-linear regime is very common and easy to achieve in many practical situations, especially in thick samples where the light depletes the chromophore in the first layers and can propagate through the medium with a sub-exponential law. Importantly, the crossover into the non-linear absorption regime only weakly depends on the dye concentration and solution viscosity. We experimentally quantify the characteristics of this peculiar optical response and determine the key transition rate constants. △ Less

Submitted 10 January, 2008; originally announced January 2008.

Thermal diffusion and bending kinetics in nematic elastomer cantilever

Authors: K. K. Hon, D. Corbett, E. M. Terentjev

Abstract: Vertically aligned mono-domain nematic liquid crystal elastomers contract when heated. If a temperature gradient is applied across the width of such a cantilever, inhomogeneous strain distribution leads to bending motion. We modelled the kinetics of thermally-induced bending in the limit of a long thin strip and the predicted time-variation of curvature agreed quantitatively with experimental da… ▽ More Vertically aligned mono-domain nematic liquid crystal elastomers contract when heated. If a temperature gradient is applied across the width of such a cantilever, inhomogeneous strain distribution leads to bending motion. We modelled the kinetics of thermally-induced bending in the limit of a long thin strip and the predicted time-variation of curvature agreed quantitatively with experimental data from samples with a range of critical indices and nematic-isotropic transition temperatures. We also deduced a value for the thermal diffusion coefficient of the elastomer. △ Less

Submitted 10 December, 2007; originally announced December 2007.

Nematic-Isotropic Transition with Quenched Disorder

Authors: L. Petridis, E. M. Terentjev

Abstract: Nematic elastomers do not show the discontinuous, first-order, phase transition that the Landau-De Gennes mean field theory predicts for a quadrupolar ordering in 3D. We attribute this behavior to the presence of network crosslinks, which act as sources of quenched orientational disorder. We show that the addition of weak random anisotropy results in a singular renormalization of the Landau-De G… ▽ More Nematic elastomers do not show the discontinuous, first-order, phase transition that the Landau-De Gennes mean field theory predicts for a quadrupolar ordering in 3D. We attribute this behavior to the presence of network crosslinks, which act as sources of quenched orientational disorder. We show that the addition of weak random anisotropy results in a singular renormalization of the Landau-De Gennes expression, adding an energy term proportional to the inverse quartic power of order parameter Q. This reduces the first-order discontinuity in Q. For sufficiently high disorder strength the jump disappears altogether and the phase transition becomes continuous, in some ways resembling the supercritical transitions in external field. △ Less

Submitted 30 September, 2006; originally announced October 2006.

Comments: 12 pages, 4 figures, to be published on PRE

Quenched disorder and spin-glass correlations in XY nematics

Authors: L. Petridis, E. M. Terentjev

Abstract: We present a theoretical study of the equilibrium ordering in a 3D XY nematic system with quenched random disorder. Within this model, treated with the replica trick and Gaussian variational method, the correlation length is obtained as a function of the local nematic order parameter and the effective disorder strength. These results clarify what happens in the limiting cases of diminishing orde… ▽ More We present a theoretical study of the equilibrium ordering in a 3D XY nematic system with quenched random disorder. Within this model, treated with the replica trick and Gaussian variational method, the correlation length is obtained as a function of the local nematic order parameter and the effective disorder strength. These results clarify what happens in the limiting cases of diminishing order parameter and disorder strength, that is near a phase transition of a pure system. In particular, it is found that quenched disorder is irrelevant as the order parameter tends to zero and hence does not change the character of the continuous XY nematic to isotropic phase transition. We discuss how these results compare with experiments and simulations △ Less

Submitted 26 September, 2006; v1 submitted 11 July, 2006; originally announced July 2006.

Comments: 19 pages, 6 figures, corrected typos

Journal ref: J. Phys. A: Math. Gen. 39, 9693-9708 (2006)

Chirality transfer and stereo-selectivity of imprinted cholesteric networks

Authors: S. Courty, A. R. Tajbakhsh, E. M. Terentjev

Abstract: Imprinting of cholesteric textures in a polymer network is a method of preserving a macroscopically chiral phase in a system with no molecular chirality. By modifying the elastics properties of the network, the resulting stored helical twist can be manipulated within a wide range since the imprinting efficiency depends on the balance between the elastics constants and twisting power at network f… ▽ More Imprinting of cholesteric textures in a polymer network is a method of preserving a macroscopically chiral phase in a system with no molecular chirality. By modifying the elastics properties of the network, the resulting stored helical twist can be manipulated within a wide range since the imprinting efficiency depends on the balance between the elastics constants and twisting power at network formation. One spectacular property of phase chirality imprinting is the created ability of the network to adsorb preferentially one stereo-component from a racemic mixture. In this paper we explore this property of chirality transfer from a macroscopic to the molecular scale. In particular, we focus on the competition between the phase chirality and the local nematic order. We demonstrate that it is possible to control the subsequent release of chiral solvent component from the imprinting network and the reversibility of the stereo-selective swelling by racemic solvents. △ Less

Submitted 5 March, 2006; originally announced March 2006.

Journal ref: Phys. Rev. E 73, 011803 (2006)

Mechanically induced helix-coil transition in biopolymer networks

Authors: S. Courty, J. L. Gornall, E. M. Terentjev

Abstract: The quasi-equilibrium evolution of the helical fraction occurring in a biopolymer network (gelatin gel) under an applied stress has been investigated by observing modulation in its optical activity. Its variation with the imposed chain extension is distinctly non-monotonic and corresponds to the transition of initially coiled strands to induced left-handed helices. The experimental results are i… ▽ More The quasi-equilibrium evolution of the helical fraction occurring in a biopolymer network (gelatin gel) under an applied stress has been investigated by observing modulation in its optical activity. Its variation with the imposed chain extension is distinctly non-monotonic and corresponds to the transition of initially coiled strands to induced left-handed helices. The experimental results are in qualitative agreement with theoretical predictions of helices induced on chain extension. This new effect of mechanically stimulated helix-coil transition has been studied further as a function of the elastic properties of the polymer network: crosslink density and network aging. △ Less

Submitted 15 February, 2006; originally announced February 2006.

Journal ref: Biophys. J. vol.90, pp. 1019-1027 (2006)