Showing 1–46 of 46 results for author: Tellambura, C

Optimization of Rate-Splitting Multiple Access with Integrated Sensing and Backscatter Communication

Authors: Diluka Galappaththige, Shayan Zargari, Chintha Tellambura, Geoffrey Ye Li

Abstract: An integrated sensing and backscatter communication (ISABC) system is introduced herein. This system features a full-duplex (FD) base station (BS) that seamlessly merges sensing with backscatter communication and supports multiple users. Multiple access (MA) for the user is provided by employing rate-splitting multiple access (RSMA). RSMA, unlike other classical orthogonal and non-orthogonal MA sc… ▽ More An integrated sensing and backscatter communication (ISABC) system is introduced herein. This system features a full-duplex (FD) base station (BS) that seamlessly merges sensing with backscatter communication and supports multiple users. Multiple access (MA) for the user is provided by employing rate-splitting multiple access (RSMA). RSMA, unlike other classical orthogonal and non-orthogonal MA schemes, splits messages into common and private streams. With RSMA, the set of common rate forms can be optimized to reduce interference. Optimized formulas are thus derived for communication rates for users, tags, and the BS's sensing rate, with the primary goal of enhancing the transmission efficiency of the BS. The optimization task involves minimizing the BS's overall transmission power by jointly optimizing the BS's beamforming vectors, the tag reflection coefficients, and user common rates. The alternating optimization method is employed to address this challenge. Concrete solutions are provided for the received beamformers, and semi-definite relaxation and slack-optimization techniques are adopted for transmit beamformers and reflection coefficients, respectively. For example, the proposed RSMA-assisted ISABC system achieves a 350% communication rate boost over a nonorthogonal multiple access-assisted ISABC, with only a 24% increase in transmit power, leveraging ten transmit/reception antennas at the BS. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 13 pages, 8 figures, Journal paper

Deep Reinforcement Learning Based Resource Allocation for MIMO Bistatic Backscatter Networks

Authors: S. Zargari, D. Galappaththige, C. Tellambura

Abstract: Bistatic backscatter communication promises ubiquitous, massive connectivity by utilizing passive tags to connect with a reader by reflecting carrier emitter (CE) signals for future Internet-of-Things (IoT) networks. This study focuses on the joint design of the transmit/received beamformers at the CE/reader and the reflection coefficient of the tag. A throughput maximization problem is thus formu… ▽ More Bistatic backscatter communication promises ubiquitous, massive connectivity by utilizing passive tags to connect with a reader by reflecting carrier emitter (CE) signals for future Internet-of-Things (IoT) networks. This study focuses on the joint design of the transmit/received beamformers at the CE/reader and the reflection coefficient of the tag. A throughput maximization problem is thus formulated, subject to satisfying the tag requirements. We develop a joint design through a series of trial-and-error interactions within the environment, driven by a predefined reward system in a continuous state and action context. We propose two deep reinforcement learning (DRL) algorithms to address the underlying optimization problem, namely deep deterministic policy gradient (DDPG) and soft actor-critic (SAC). Simulation results indicate that the proposed algorithm can learn from the environment and incrementally enhance its behavior, achieving performance that is on par with two leading benchmarks. Further, we also compared the performance of the proposed method with deep Q-network (DQN), double deep Q-network (DDQN), and dueling DQN (DuelDQN). For a system with twelve antennas, SAC leads with a 26.76% gain over DQN, followed by alternative optimization (AO) and DDPG at 23.02% and 19.16%. DDQN and DuelDQN show smaller improvements of 10.40% and 14.36%, respectively, against DQN. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Submitted to an IEEE Transactions Journal

Transmit Power Optimization for Integrated Sensing and Backscatter Communication

Authors: S. Zargari, D. Galappaththige, C. Tellambura

Abstract: Ambient Internet of Things networks use low-cost, low-power backscatter tags in various industry applications. By exploiting those tags, we introduce the integrated sensing and backscatter communication (ISABC) system, featuring multiple backscatter tags, a user (reader), and a full-duplex base station (BS) that integrates sensing and (backscatter) communications. The BS undertakes dual roles of d… ▽ More Ambient Internet of Things networks use low-cost, low-power backscatter tags in various industry applications. By exploiting those tags, we introduce the integrated sensing and backscatter communication (ISABC) system, featuring multiple backscatter tags, a user (reader), and a full-duplex base station (BS) that integrates sensing and (backscatter) communications. The BS undertakes dual roles of detecting backscatter tags and communicating with the user, leveraging the same temporal and frequency resources. The tag-reflected BS signals offer data to the user and enable the BS to sense the environment simultaneously. We derive both user and tag communication rates and the sensing rate of the BS. We jointly optimize the transmit/received beamformers and tag reflection coefficients to minimize the total BS power. To solve this problem, we employ the alternating optimization technique. We offer a closed-form solution for the received beamformers while utilizing semi-definite relaxation and slack-optimization for transmit beamformers and power reflection coefficients, respectively. For example, with ten transmit/reception antennas at the BS, ISABC delivers a 75% sum communication and sensing rates gain over a traditional backscatter while requiring a 3.4% increase in transmit power. Furthermore, ISABC with active tags only requires a 0.24% increase in transmit power over conventional integrated sensing and communication. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: Submitted to an IEEE Transactions Journal

A Riemannian Manifold Approach to Constrained Resource Allocation in ISAC

Authors: Shayan Zargari, Diluka Galappaththige, Chintha Tellambura, Vincent Poor

Abstract: This paper introduces a new resource allocation framework for integrated sensing and communication (ISAC) systems, which are expected to be fundamental aspects of sixth-generation networks. In particular, we develop an augmented Lagrangian manifold optimization (ALMO) framework designed to maximize communication sum rate while satisfying sensing beampattern gain targets and base station (BS) trans… ▽ More This paper introduces a new resource allocation framework for integrated sensing and communication (ISAC) systems, which are expected to be fundamental aspects of sixth-generation networks. In particular, we develop an augmented Lagrangian manifold optimization (ALMO) framework designed to maximize communication sum rate while satisfying sensing beampattern gain targets and base station (BS) transmit power limits. ALMO applies the principles of Riemannian manifold optimization (MO) to navigate the complex, non-convex landscape of the resource allocation problem. It efficiently leverages the augmented Lagrangian method to ensure adherence to constraints. We present comprehensive numerical results to validate our framework, which illustrates the ALMO method's superior capability to enhance the dual functionalities of communication and sensing in ISAC systems. For instance, with 12 antennas and 30 dBm BS transmit power, our proposed ALMO algorithm delivers a 10.1% sum rate gain over a benchmark optimization-based algorithm. This work demonstrates significant improvements in system performance and contributes a new algorithmic perspective to ISAC resource management. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Comments: 13 pages, 11 figures, submitted to an IEEE Transactions Journal

Sensing and Backscatter Communication Integration: Realizing Efficiency in Wireless Systems for IoT

Authors: Shayan Zargari, Diluka Galappaththige, Chintha Tellambura

Abstract: In an era driven by the Internet of Things (IoT) and rapid wireless communication advances, the synergy between sensing and backscatter communication (BackCom) has emerged as a frontier of research. This paper delves deep into the integration of sensing technologies with BackCom, a burgeoning field with significant implications for energy-efficient wireless systems. By tracing the historical devel… ▽ More In an era driven by the Internet of Things (IoT) and rapid wireless communication advances, the synergy between sensing and backscatter communication (BackCom) has emerged as a frontier of research. This paper delves deep into the integration of sensing technologies with BackCom, a burgeoning field with significant implications for energy-efficient wireless systems. By tracing the historical developments and principles of BackCom, we establish the foundational understanding crucial for integrating advanced sensing methodologies. Our study adopts a mixed-method approach, combining quantitative analyses of system performances with qualitative assessments of various integration techniques. Furthermore, these integrated systems showcase enhanced adaptability in dynamic environments, a pivotal attribute for future IoT applications. These findings hold profound implications for industries focusing on smart technologies, as they underscore the potential for achieving both sustainable and efficient communication. Our research distinguishes itself by not only highlighting the benefits but also addressing the challenges faced in this integration, providing a comprehensive overview of the topic. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 8 pages, 6 figures, Magazine

Signal Detection in Ambient Backscatter Systems: Fundamentals, Methods, and Trends

Authors: Shayan Zargari, Azar Hakimi, Fatemeh Rezaei, Chintha Tellambura, Amine Maaref

Abstract: Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the ra… ▽ More Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the radio frequency (RF) signals by themselves. Thus, these backscatter tags can be low-cost and battery-free. The RF signals can be ambient sources such as wireless-fidelity (Wi-Fi), cellular, or television (TV) signals, or the system can generate them externally. Backscatter channel characteristics are different from conventional point-to-point or cooperative relay channels. These systems are also affected by a strong interference link between the RF source and the tag besides the direct and backscattering links, making signal detection challenging. This paper provides an overview of the fundamentals, challenges, and ongoing research in signal detection for AmBC networks. It delves into various detection methods, discussing their advantages and drawbacks. The paper's emphasis on signal detection sets it apart and positions it as a valuable resource for IoT and wireless communication professionals and researchers. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Comments: Accepted for publication in the IEEE Access

Enhancing AmBC Systems with Deep Learning for Joint Channel Estimation and Signal Detection

Authors: S. Zargari, A. Hakimi, C. Tellambura, A. Maaref

Abstract: The era of ubiquitous, affordable wireless connectivity has opened doors to countless practical applications. In this context, ambient backscatter communication (AmBC) stands out, utilizing passive tags to establish connections with readers by harnessing reflected ambient radio frequency (RF) signals. However, conventional data detectors face limitations due to their inadequate knowledge of channe… ▽ More The era of ubiquitous, affordable wireless connectivity has opened doors to countless practical applications. In this context, ambient backscatter communication (AmBC) stands out, utilizing passive tags to establish connections with readers by harnessing reflected ambient radio frequency (RF) signals. However, conventional data detectors face limitations due to their inadequate knowledge of channel and RF-source parameters. To address this challenge, we propose an innovative approach using a deep neural network (DNN) for channel state estimation (CSI) and signal detection within AmBC systems. Unlike traditional methods that separate CSI estimation and data detection, our approach leverages a DNN to implicitly estimate CSI and simultaneously detect data. The DNN model, trained offline using simulated data derived from channel statistics, excels in online data recovery, ensuring robust performance in practical scenarios. Comprehensive evaluations validate the superiority of our proposed DNN method over traditional detectors, particularly in terms of bit error rate (BER). In high signal-to-noise ratio (SNR) conditions, our method exhibits an impressive approximately 20% improvement in BER performance compared to the maximum likelihood (ML) approach. These results underscore the effectiveness of our developed approach for AmBC channel estimation and signal detection. In summary, our method outperforms traditional detectors, bolstering the reliability and efficiency of AmBC systems, even in challenging channel conditions. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Comments: Accepted for publication in the IEEE Transactions on Communications

Cell-Free Bistatic Backscatter Communication: Channel Estimation, Optimization, and Performance Analysis

Authors: Diluka Galappaththige, Fatemeh Rezaei, Chintha Tellambura, Amine Maaref

Abstract: This study introduces and investigates the integration of a cell-free architecture with bistatic backscatter communication (BiBC), referred to as cell-free BiBC or distributed access point (AP)-assisted BiBC, which can enable potential applications in future (EH)-based Internet-of-Things (IoT) networks. To that purpose, we first present a pilot-based channel estimation scheme for estimating the di… ▽ More This study introduces and investigates the integration of a cell-free architecture with bistatic backscatter communication (BiBC), referred to as cell-free BiBC or distributed access point (AP)-assisted BiBC, which can enable potential applications in future (EH)-based Internet-of-Things (IoT) networks. To that purpose, we first present a pilot-based channel estimation scheme for estimating the direct, cascaded, forward channels of the proposed system setup. We next utilize the channel estimates for designing the optimal beamforming weights at the APs, reflection coefficients at the tags, and reception filters at the reader to maximize the tag sum rate while meeting the tags' minimum energy requirements. Because the proposed maximization problem is non-convex, we propose a solution based on alternative optimization, fractional programming, and Rayleigh quotient techniques. We also quantify the computational complexity of the developed algorithms. Finally, we present extensive numerical results to validate the proposed channel estimation scheme and optimization framework, as well as the performance of the integration of these two technologies. Compared to the random beamforming/combining benchmark, our algorithm yields impressive gains. For example, it achieves $\sim$ 64.8\% and $\sim$ 253.5\% gains in harvested power and tag sum rate, respectively, for 10 dBm with 36 APs and 3 tags. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comments: 13 pages, 10 figures, journal article

RIS-Assisted Energy Harvesting Gains for Bistatic Backscatter Networks: Performance Analysis and RIS Phase Optimization

Authors: Diluka Galappaththige, Fatemeh Rezaei, Chintha Tellambura, Sanjeewa Herath

Abstract: Inexpensive tags powered by energy harvesting (EH) can realize green (energy-efficient) Internet of Things (IoT) networks. However, tags are vulnerable to energy insecurities, resulting in poor communication ranges, activation distances, and data rates. To overcome these challenges, we explore the use of a reconfigurable intelligent surface (RIS) for EH-based IoT networks. The RIS is deployed to e… ▽ More Inexpensive tags powered by energy harvesting (EH) can realize green (energy-efficient) Internet of Things (IoT) networks. However, tags are vulnerable to energy insecurities, resulting in poor communication ranges, activation distances, and data rates. To overcome these challenges, we explore the use of a reconfigurable intelligent surface (RIS) for EH-based IoT networks. The RIS is deployed to enhance RF power at the tag, improving EH capabilities. We consider linear and non-linear EH models and analyze single-tag and multi-tag scenarios. For single-tag networks, the tag's maximum received power and the reader's signal-to-noise ratio with the optimized RIS phase-shifts are derived. Key metrics, such as received power, harvested power, achievable rate, outage probability, bit error rate, and diversity order, are also evaluated. The impact of RIS phase shift quantization errors is also studied. For the multi-tag case, an algorithm to compute the optimal RIS phase-shifts is developed. Numerical results and simulations demonstrate significant improvements compared to the benchmarks of no-RIS case and random RIS-phase design. For instance, our optimal design with a \num{200}-element RIS increases the activation distance by \qty{270}{\percent} and \qty{55}{\percent} compared to those benchmarks. In summary, RIS deployment improves the energy autonomy of tags while maintaining the basic tag design intact. △ Less

Submitted 18 September, 2023; originally announced September 2023.

Comments: 15 pages, 12 figures, journal paper

Adversarial Score-Based Generative Models for MMSE-achieving AmBC Channel Estimation

Authors: Fatemeh Rezaei, S. Mojtaba Marvasti-Zadeh, Chintha Tellambura, Amine Maaref

Abstract: This letter presents a pioneering method that employs deep learning within a probabilistic framework for the joint estimation of both direct and cascaded channels in an ambient backscatter (AmBC) network comprising multiple tags. In essence, we leverage an adversarial score-based generative model for training, enabling the acquisition of channel distributions. Subsequently, our channel estimation… ▽ More This letter presents a pioneering method that employs deep learning within a probabilistic framework for the joint estimation of both direct and cascaded channels in an ambient backscatter (AmBC) network comprising multiple tags. In essence, we leverage an adversarial score-based generative model for training, enabling the acquisition of channel distributions. Subsequently, our channel estimation process involves sampling from the posterior distribution, facilitated by the annealed Langevin sampling technique. Notably, our method demonstrates substantial advancements over standard least square (LS) estimation techniques, achieving performance akin to that of the minimum mean square error (MMSE) estimator for the direct channel, and outperforming it for the cascaded channels. △ Less

Submitted 25 December, 2023; v1 submitted 11 September, 2023; originally announced September 2023.

Breaking the Interference and Fading Gridlock in Backscatter Communications: State-of-the-Art, Design Challenges, and Future Directions

Authors: Bowen Gu, Dong Li, Haiyang Ding, Gongpu Wang, Chintha Tellambura

Abstract: As the Internet of Things (IoT) advances by leaps and bounds, a multitude of devices are becoming interconnected, marking the onset of an era where all things are connected. While this growth opens up opportunities for novel products and applications, it also leads to increased energy demand and battery reliance for IoT devices, creating a significant bottleneck that hinders sustainable progress.… ▽ More As the Internet of Things (IoT) advances by leaps and bounds, a multitude of devices are becoming interconnected, marking the onset of an era where all things are connected. While this growth opens up opportunities for novel products and applications, it also leads to increased energy demand and battery reliance for IoT devices, creating a significant bottleneck that hinders sustainable progress. At this juncture, backscatter communication (BackCom), as a low-power and passive communication method, emerges as one of the promising solutions to this energy impasse by reducing the manufacturing costs and energy consumption of IoT devices. However, BackCom systems face challenges such as complex interference environments, including direct link interference (DLI) and mutual interference (MI) between tags, which can severely disrupt the efficiency of BackCom networks. Moreover, double-path fading is another major issue that leads to the degraded system performance. To fully unleash the potential of BackComs, the purpose of this paper is to furnish a comprehensive review of existing solutions with a focus on combatting these specific interference challenges and overcoming dual-path fading, offering an insightful analysis and comparison of various strategies for effectively mitigating these issues. Specifically, we begin by introducing the preliminaries for the BackCom, including its history, operating mechanisms, main architectures, etc, providing a foundational understanding of the field. Then, we delve into fundamental issues related to BackCom systems, such as solutions for the DLI, the MI, and the double-path fading. This paper thoroughly provides state-of-the-art advances for each case, particularly highlighting how the latest innovations in theoretical approaches and system design can strategically address these challenges. △ Less

Submitted 9 January, 2024; v1 submitted 30 August, 2023; originally announced August 2023.

Improved Energy-Based Signal Detection for Ambient Backscatter Communications

Authors: S. Zargari, C. Tellambura, A. Maaref

Abstract: In ambient backscatter communication (AmBC) systems, passive tags connect to a reader by reflecting an ambient radio frequency (RF) signal. However, the reader may not know the channel states and RF source parameters. The traditional energy detector (TED) appears to be an ideal solution. However, it performs poorly under these conditions. To address this, we propose two new detectors: (1) A joint… ▽ More In ambient backscatter communication (AmBC) systems, passive tags connect to a reader by reflecting an ambient radio frequency (RF) signal. However, the reader may not know the channel states and RF source parameters. The traditional energy detector (TED) appears to be an ideal solution. However, it performs poorly under these conditions. To address this, we propose two new detectors: (1) A joint correlation-energy detector (JCED) based on the first-order correlation of the received samples and (2) An improved energy detector (IED) based on the p-th norm of the received signal vector. We compare the performance of IED and TED under the generalized noise model using McLeish distribution and derive a general analytical formula for the area under the receiver operating characteristic (ROC) curves. Based on our results, both detectors outperform TED. For example, the probability of detection with a false alarm rate of 1\% for JCED and IED is 22.97\% and 5.41\% higher, respectively, compared to TED for a single-antenna reader. Using the direct interference cancellation (DIC) technique, these gains are 34.92\% and 3.7\%, respectively. With a four-antenna array at the reader and a 5\% false alarm rate, the JCED shows a significant BER improvement of 28.68\% without DIC and 48.21\% with DIC. △ Less

Submitted 12 June, 2024; v1 submitted 22 June, 2023; originally announced June 2023.

Comments: This paper has been accepted by IEEE TVT

Time-Spread Pilot-Based Channel Estimation for Backscatter Networks

Authors: Fatemeh Rezaei, Diluka Galappaththige, Chintha Tellambura, Amine Maaref

Abstract: Current backscatter channel estimators employ an inefficient silent pilot transmission protocol, where tags alternate between silent and active states. To enhance performance, we propose a novel approach where tags remain active simultaneously throughout the entire training phase. This enables a one-shot estimation of both the direct and cascaded channels and accommodates various backscatter netwo… ▽ More Current backscatter channel estimators employ an inefficient silent pilot transmission protocol, where tags alternate between silent and active states. To enhance performance, we propose a novel approach where tags remain active simultaneously throughout the entire training phase. This enables a one-shot estimation of both the direct and cascaded channels and accommodates various backscatter network configurations. We derive the conditions for optimal pilot sequences and also establish that the minimum variance unbiased (MVU) estimator attains the Cramer-Rao lower bound. Next, we propose new pilot designs to avoid pilot contamination. We then present several linear estimation methods, including least square (LS), scaled LS, and linear minimum mean square error (MMSE), to evaluate the performance of our proposed scheme. We also derive the analytical MMSE estimator using our proposed pilot designs. Furthermore, we adapt our method for cellular-based passive Internet-of-Things (IoT) networks with multiple tags and cellular users. Extensive numerical results and simulations are provided to validate the effectiveness of our approach. Notably, at least 10 dBm and 12 dBm power savings compared to the prior art are achieved when estimating the direct and cascaded channels. These findings underscore the practical benefits and superiority of our proposed technique. △ Less

Submitted 2 October, 2023; v1 submitted 26 May, 2023; originally announced May 2023.

Comments: This paper has been published in the IEEE Transactions on Communications

NOMA-Assisted Symbiotic Backscatter: Novel Beamforming Designs Under Imperfect SIC

Authors: Fatemeh Rezaei, Diluka Galappaththige, Chintha Tellambura, Sanjeewa Herath

Abstract: Optimal beamforming designs under imperfect successive interference cancellation (SIC) decoding for a symbiotic network of non-orthogonal multiple access (NOMA) primary users and a secondary ambient tag have been lacking. We address that issue here. The primary base station (BS) serves NOMA users and a passive tag simultaneously in this network. We develop two transmit beamforming designs to meet… ▽ More Optimal beamforming designs under imperfect successive interference cancellation (SIC) decoding for a symbiotic network of non-orthogonal multiple access (NOMA) primary users and a secondary ambient tag have been lacking. We address that issue here. The primary base station (BS) serves NOMA users and a passive tag simultaneously in this network. We develop two transmit beamforming designs to meet the user and tag requirements while mitigating the effect of imperfect SIC. Specifically, we design optimal BS transmit beamforming and power allocation to either maximize the weighted sum rate of NOMA users and the tag or minimize the BS transmit power under the minimum rate requirements while satisfying the tag minimum energy requirement. Because both these problems are non-convex, we propose algorithms using alternative optimization, fractional programming, and semi-definite relaxation techniques. We also analyze their computational complexity. Finally, we present extensive numerical results to validate the proposed schemes and to show significant performance gains while kee** the tag design intact. For example, the proposed digital beamforming increases the harvested power and data rate by 2.16e3 % and 314.5 % compared to random beamforming. △ Less

Submitted 27 November, 2023; v1 submitted 17 February, 2023; originally announced February 2023.

Comments: This paper has been accepted for publication in the IEEE Transactions on Vehicular Technology

User Scheduling and Trajectory Optimization for Energy-Efficient IRS-UAV Networks with SWIPT

Authors: S. Zargari, A. Hakimi, C. Tellambura, S. Herath

Abstract: This paper investigates user scheduling and trajectory optimization for a network supported by an intelligent reflecting surface (IRS) mounted on an unmanned aerial vehicle (UAV). The IRS is powered via the simultaneous wireless information and power transfer (SWIPT) technique. The IRS boosts users' uplink signals to improve the network's longevity and energy efficiency. It simultaneously harvests… ▽ More This paper investigates user scheduling and trajectory optimization for a network supported by an intelligent reflecting surface (IRS) mounted on an unmanned aerial vehicle (UAV). The IRS is powered via the simultaneous wireless information and power transfer (SWIPT) technique. The IRS boosts users' uplink signals to improve the network's longevity and energy efficiency. It simultaneously harvests energy with a non-linear energy harvesting circuit and reflects the incident signals by controlling its reflection coefficients and phase shifts. The trajectory of the UAV impacts the efficiency of these operations. We minimize the maximum energy consumption of all users by joint optimization of user scheduling, UAV trajectory/velocity, and IRS phase shifts/reflection coefficients while guaranteeing each user's minimum required data rate and harvested energy of the IRS. We first derive a closed-form solution for the IRS phase shifts and then address the non-convexity of the critical problem. Finally, we propose an alternating optimization (AO) algorithm to optimize the remaining variables iteratively. We demonstrate the gains over several benchmarks. For instance, with a 50-element IRS, min-max energy consumption can be as low as 0.0404 (Joule), a 7.13% improvement over the No IRS case (achieving 0.0435 (Joule)). We also show that IRS-UAV without EH performs best at the cost of circuit power consumption of the IRS (a 20% improvement over the No IRS case). △ Less

Submitted 12 September, 2022; originally announced September 2022.

Comments: Accepted for publication in the IEEE Transactions on Vehicular Technology

IRS-Enabled Backscattering in a Downlink Non-Orthogonal Multiple Access System

Authors: Azar Hakimi, Shayan Zargari, Chintha Tellambura, Sanjeewa Herath

Abstract: Intelligent reflecting surface (IRS)-enabled backscatter communications can be enabled by an access point (AP) that splits its transmit signal into modulated and unmodulated parts. This letter integrates non-orthogonal multiple access (NOMA) with this method to create a two-user primary system and a secondary system of IRS data. Considering the decoding order, we maximize the rate of the strongest… ▽ More Intelligent reflecting surface (IRS)-enabled backscatter communications can be enabled by an access point (AP) that splits its transmit signal into modulated and unmodulated parts. This letter integrates non-orthogonal multiple access (NOMA) with this method to create a two-user primary system and a secondary system of IRS data. Considering the decoding order, we maximize the rate of the strongest primary user by jointly optimizing the IRS phase shifts, power splitting (PS) factor at the AP, and NOMA power coefficients while guaranteeing the quality of service (QoS) for both weak user and IRS data in the primary and secondary systems, respectively. The resulting optimization problem is non-convex. Thus, we split it into three parts and develop an alternating optimization (AO) algorithm. The advantage is that we derive closed-form solutions for the PS factor and NOMA power coefficients in the first two parts. In the third part, we optimize the phase shifts by exploiting semi-definite relaxation (SDR) and penalty techniques to handle the unit-modulus constraints. This algorithm achieves substantial gains (e.g., 40--68%) compared to relevant baseline schemes. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Comments: Accepted for publication in the IEEE Communications Letters

Doppler Shift and Channel Estimation for Intelligent Transparent Surface Assisted Communication Systems on High-Speed Railways

Authors: Yirun Wang, Gongpu Wang, Ruisi He, Bo Ai, Chintha Tellambura

Abstract: The critical distinction between the emerging intelligent transparent surface (ITS) and intelligent reflection surface (IRS) is that the incident signals can penetrate the ITS instead of being reflected, which enables the ITS to combat the severe signal penetration loss for high-speed railway (HSR) wireless communications. This paper thus investigates the channel estimation problem for an ITS-assi… ▽ More The critical distinction between the emerging intelligent transparent surface (ITS) and intelligent reflection surface (IRS) is that the incident signals can penetrate the ITS instead of being reflected, which enables the ITS to combat the severe signal penetration loss for high-speed railway (HSR) wireless communications. This paper thus investigates the channel estimation problem for an ITS-assisted HSR network where the ITS is embedded into the carriage window. We first formulate the channels as functions of physical parameters, and thus transform the channel estimation into a parameter recovery problem. Next, we design the first two pilot blocks within each frame and develop a serial low-complexity channel estimation algorithm. Specifically, the channel estimates are initially obtained, and each estimate is further expressed as the sum of its perfectly known value and the estimation error. By leveraging the relationship between channels for the two pilot blocks, we recover the Doppler shifts from the channel estimates, based on which we can further acquire other channel parameters. Moreover, the Cramer-Rao lower bound (CRLB) for each parameter is derived as a performance benchmark. Finally, we provide numerical results to establish the effectiveness of our proposed estimators. △ Less

Submitted 31 July, 2022; originally announced August 2022.

Comments: 10 pages, 7 figures

Journal ref: IEEE Transactions on Communications, 2023 (latest version)

Multiuser MISO PS-SWIPT Systems: Active or Passive RIS?

Authors: Shayan Zargari, Azar Hakimi, Chintha Tellambura, Sanjeewa Herath

Abstract: Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wire… ▽ More Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wireless information and power transfer (SWIPT) in a multiuser system. The users exploit power splitting (PS) to decode information and harvest energy simultaneously based on a realistic piecewise nonlinear energy harvesting model. The goal is to minimize the base station (BS) transmit power by optimizing its beamformers, PS ratios, and RIS phase shifts/amplification factors. The simulation results show significant improvements (e.g., 19% and 28%) with the maximum reflect power of 10 mW and 15 mW, respectively, compared to the passive RIS without higher computational complexity cost. We also show the robustness of the proposed algorithm against imperfect channel state information. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: Accepted for publication in the IEEE Wireless Communications Letters

Energy-Efficient Hybrid Offloading for Backscatter-Assisted Wirelessly Powered MEC with Reconfigurable Intelligent Surfaces

Authors: S. Zargari, C. Tellambura, S. Herath

Abstract: We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optim… ▽ More We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optimize the time/power allocations, local computing frequencies, execution times, backscattering coefficients, and RIS phase shifts.} This goal results in a multi-objective optimization problem (MOOP) with conflicting objectives. Thus, we simultaneously maximize system throughput and minimize energy consumption via the Tchebycheff method, transforming into two single-objective optimization problems (SOOPs). For throughput maximization, we exploit alternating optimization (AO) to yield two sub-problems. For the first one, we derive closed-form resource allocations. For the second one, we design the RIS phase shifts via semi-definite relaxation, a difference of convex functions programming, majorization minimization techniques, and a penalty function for enforcing a rank-one solution. For energy minimization, we derive closed-form resource allocations. We demonstrate the gains over several benchmarks. For instance, with a $20$-element RIS, EE can be as high as 3 (Mbits/Joule), a 150\% improvement over the no-RIS case (achieving only 2 (Mbits/Joule)). △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: The final version of this paper was accepted by IEEE Transactions on Mobile Computing

Task Offloading with Multi-Tier Computing Resources in Next Generation Wireless Networks

Authors: Kunlun Wang, Jiong **, Yang Yang, Tao Zhang, Arumugam Nallanathan, Chintha Tellambura, Bijan Jabbari

Abstract: With the development of next-generation wireless networks, the Internet of Things (IoT) is evolving towards the intelligent IoT (iIoT), where intelligent applications usually have stringent delay and jitter requirements. In order to provide low-latency services to heterogeneous users in the emerging iIoT, multi-tier computing was proposed by effectively combining edge computing and fog computing.… ▽ More With the development of next-generation wireless networks, the Internet of Things (IoT) is evolving towards the intelligent IoT (iIoT), where intelligent applications usually have stringent delay and jitter requirements. In order to provide low-latency services to heterogeneous users in the emerging iIoT, multi-tier computing was proposed by effectively combining edge computing and fog computing. More specifically, multi-tier computing systems compensate for cloud computing through task offloading and dispersing computing tasks to multi-tier nodes along the continuum from the cloud to things. In this paper, we investigate key techniques and directions for wireless communications and resource allocation approaches to enable task offloading in multi-tier computing systems. A multi-tier computing model, with its main functionality and optimization methods, is presented in details. We hope that this paper will serve as a valuable reference and guide to the theoretical, algorithmic, and systematic opportunities of multi-tier computing towards next-generation wireless networks. △ Less

Submitted 27 May, 2022; originally announced May 2022.

New Antenna Selection Schemes for Full-Duplex Cooperative MIMO-NOMA Systems

Authors: Zahra Mobini, Mohammadali Mohammadi, Theodoros A. Tsiftsis, Zhiguo Ding, Chintha Tellambura

Abstract: In this paper, we address the antenna selection (AS) problem in full-duplex (FD) cooperative non-orthogonal multiple access (NOMA) systems, where a multi-antenna FD relay bridges the connection between the multi-antenna base station and NOMA far user. Specifically, two AS schemes, namely max-$\SUu$ and max-$\SUuu$, are proposed to maximize the end-to-end signal-to-interference-plus-noise ratio at… ▽ More In this paper, we address the antenna selection (AS) problem in full-duplex (FD) cooperative non-orthogonal multiple access (NOMA) systems, where a multi-antenna FD relay bridges the connection between the multi-antenna base station and NOMA far user. Specifically, two AS schemes, namely max-$\SUu$ and max-$\SUuu$, are proposed to maximize the end-to-end signal-to-interference-plus-noise ratio at either or both near and far users, respectively. Moreover, a two-stage AS scheme, namely quality-of-service (QoS) provisioning scheme, is designed to realize a specific rate at the far user while improving the near user's rate. To enhance the performance of the QoS provisioning AS scheme, the idea of dynamic antenna clustering is applied at the relay to adaptively partition the relay's antennas into transmit and receive subsets. The proposed AS schemes' exact outage probability and achievable rate expressions are derived. To provide more insight, closed-form asymptotic outage probability expressions for the max-$\SUu$ and max-$\SUuu$ AS schemes are obtained. Our results show that while the QoS provisioning AS scheme can deliver a near-optimal performance for static antenna setup at the relay, it provides up to $12\%$ average sum rate gain over the optimum AS selection with fixed antenna setup. △ Less

Submitted 25 February, 2022; originally announced February 2022.

Comments: Submitted to IEEE Transactions on Communications

PAPR Reduction Method Based on Parametric Minimum Cross Entropy for OFDM Signals

Authors: Yajun Wang, Wen Chen, Chintha Tellambura

Abstract: The partial transmit sequence (PTS) technique has received much attention in reducing the high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals. However, the PTS technique requires an exhaustive search of all combinations of the allowed phase factors, and the search complexity increases exponentially with the number of sub-blocks. In this paper, a nov… ▽ More The partial transmit sequence (PTS) technique has received much attention in reducing the high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals. However, the PTS technique requires an exhaustive search of all combinations of the allowed phase factors, and the search complexity increases exponentially with the number of sub-blocks. In this paper, a novel method based on parametric minimum cross entropy (PMCE) is proposed to search the optimal combination of phase factors. The PMCE algorithm not only reduces the PAPR significantly, but also decreases the computational complexity. The simulation results show that it achieves more or less the same PAPR reduction as that of exhaustive search. △ Less

Submitted 13 March, 2020; originally announced March 2020.

Comments: arXiv admin note: text overlap with arXiv:2003.06115

Genetic Algorithm Based Nearly Optimal Peak Reduction Tone Set Selection for Adaptive Amplitude Clip** PAPR Reduction

Authors: Yajun Wang, Wen Chen, Chintha Tellambura

Abstract: In tone reservation (TR) based OFDM systems, the peak to average power ratio (PAPR) reduction performance mainly depends on the selection of the peak reduction tone (PRT) set and the optimal target clip** level. Finding the optimal PRT set requires an exhaustive search of all combinations of possible PRT sets, which is a nondeterministic polynomial-time (NP-hard) problem, and this search is infe… ▽ More In tone reservation (TR) based OFDM systems, the peak to average power ratio (PAPR) reduction performance mainly depends on the selection of the peak reduction tone (PRT) set and the optimal target clip** level. Finding the optimal PRT set requires an exhaustive search of all combinations of possible PRT sets, which is a nondeterministic polynomial-time (NP-hard) problem, and this search is infeasible for the number of tones used in practical systems. The existing selection methods, such as the consecutive PRT set, equally spaced PRT set and random PRT set, perform poorly compared to the optimal PRT set or incur high computational complexity. In this paper, an efficient scheme based on genetic algorithm (GA) with lower computational complexity is proposed for searching a nearly optimal PRT set. While TR-based clip** is simple and attractive for practical implementation, determining the optimal target clip** level is difficult. To overcome this problem, we propose an adaptive clip** control algorithm.Simulation results show that our proposed algorithms efficiently obtain a nearly optimal PRT set and good PAPR reductions. △ Less

Submitted 13 March, 2020; originally announced March 2020.

A PAPR Reduction Method Based on Artificial Bee Colony Algorithm for OFDM Signals

Authors: Yajun Wang, Wen Chen, Chintha Tellambura

Abstract: One of the major drawbacks of orthogonal frequency division multiplexing (OFDM) signals is the high peak to average power ratio (PAPR) of the transmitted signal. Many PAPR reduction techniques have been proposed in the literature, among which, partial transmit sequence (PTS) technique has been taken considerable investigation.However, PTS technique requires an exhaustive search over all combinatio… ▽ More One of the major drawbacks of orthogonal frequency division multiplexing (OFDM) signals is the high peak to average power ratio (PAPR) of the transmitted signal. Many PAPR reduction techniques have been proposed in the literature, among which, partial transmit sequence (PTS) technique has been taken considerable investigation.However, PTS technique requires an exhaustive search over all combinations of allowed phase factors, whose complexity increases exponentially with the number of sub-blocks. In this paper, a newly suboptimal method based on modified artificial bee colony (ABC-PTS) algorithm is proposed to search the better combination of phase factors. The ABC-PTS algorithm can significantly reduce the computational complexity for larger PTS subblocks and offers lower PAPR at the same time. Simulation results show that the ABC-PTS algorithm is an efficient method to achieve significant PAPR reduction. △ Less

Submitted 13 March, 2020; originally announced March 2020.

Rate Analysis of Cell-Free Massive MIMO-NOMA With Three Linear Precoders

Authors: Fatemeh Rezaei, Chintha Tellambura, Aliakbar Tadaion, Ali Reza Heidarpour

Abstract: Although the hybrid of cell-free (CF) massive multiple-input multiple-output (MIMO) and non-orthogonal multiple access (NOMA) promises massive spectral efficiency gains, the type of precoders employed at the access points (APs) impacts the gains. In this paper, we thus comprehensively evaluate the system performance with maximum ratio transmission (MRT), full-pilot zero-forcing (fpZF) and modified… ▽ More Although the hybrid of cell-free (CF) massive multiple-input multiple-output (MIMO) and non-orthogonal multiple access (NOMA) promises massive spectral efficiency gains, the type of precoders employed at the access points (APs) impacts the gains. In this paper, we thus comprehensively evaluate the system performance with maximum ratio transmission (MRT), full-pilot zero-forcing (fpZF) and modified regularized ZF (mRZF) precoders. We derive their closed-form sum rate expressions by considering Rayleigh fading channels, the effects of intra-cluster pilot contamination, inter-cluster interference, and imperfect successive interference cancellation (SIC). Our results reveal that this system supports significantly more users simultaneously at the same coherence interval compared to its OMA equivalent. However, intra-cluster pilot contamination and imperfect SIC degrade the system performance when the number of users is low. Moreover, with perfect SIC, mRZF and fpZF significantly outperform MRT. Also, we show that this system with either mRZF or fpZF precoding outperforms OMA systems with MRT. The analytical findings are verified by numerical results. △ Less

Submitted 22 December, 2020; v1 submitted 28 November, 2019; originally announced November 2019.

Comments: Published in IEEE Transactions on Communications

Channel Estimation for Wireless Communication Systems Assisted by Large Intelligent Surfaces

Authors: Junliang Lin, Gongpu Wang, Rongfei Fan, Theodoros A. Tsiftsis, Chintha Tellambura

Abstract: In this letter, the channel estimation problem is studied for wireless communication systems assisted by large intelligent surface. Due to features of assistant channel, channel estimation (CE) problem for the investigated system is shown as a constrained estimation error minimization problem, which differs from traditional CE problems. A Lagrange multiplier and dual ascent-based estimation scheme… ▽ More In this letter, the channel estimation problem is studied for wireless communication systems assisted by large intelligent surface. Due to features of assistant channel, channel estimation (CE) problem for the investigated system is shown as a constrained estimation error minimization problem, which differs from traditional CE problems. A Lagrange multiplier and dual ascent-based estimation scheme is then designed to obtain a closed-form solution for the estimator iteratively. Moreover, the Cramer-Rao lower bounds are deduced for performance evaluation. Simulation results show that the designed scheme could improve estimation accuracy up to 18%, compared with least square method in low signal-to-noise ratio regime. △ Less

Submitted 5 November, 2019; originally announced November 2019.

Comments: 4 pages, 3 figures, journal

Full-Duplex GFDM Radio Transceivers in the Presence of Phase Noise, CFO and IQ Imbalance

Authors: Amirhossein Mohammadian, Chintha Tellambura

Abstract: This paper addresses the performance of a full-duplex (FD) generalized frequency division multiplexing (GFDM) transceiver in the presence of radio frequency (RF) impairments including phase noise, carrier frequency offset (CFO) and in-phase (I) and quadrature (Q) imbalance. We study analog and digital self-interference (SI) cancellation and develop a complementary SI suppression method. Closed-for… ▽ More This paper addresses the performance of a full-duplex (FD) generalized frequency division multiplexing (GFDM) transceiver in the presence of radio frequency (RF) impairments including phase noise, carrier frequency offset (CFO) and in-phase (I) and quadrature (Q) imbalance. We study analog and digital self-interference (SI) cancellation and develop a complementary SI suppression method. Closed-form solutions for the residual SI power and the desired signal power and signal-to-interference ratio (SIR) are provided. Simulation results show that the RF impairments degrade SI cancellation and FD GFDM is more sensitive to them compares to FD orthogonal frequency division multiplexing (OFDM). Hence, we propose an FD GFDM receiver filter for maximizing the SIR. Significantly, it achieves 25 dB higher SIR than FD OFDM transceiver. △ Less

Submitted 29 March, 2019; originally announced April 2019.

Eigenvalue Based Detection of a Signal in Colored Noise: Finite and Asymptotic Analyses

Authors: Lahiru D. Chamain, Prathapasinghe Dharmawansa, Saman Atapattu, Chintha Tellambura

Abstract: Signal detection in colored noise with an unknown covariance matrix has a myriad of applications in diverse scientific/engineering fields. The test statistic is the largest generalized eigenvalue (l.g.e.) of the whitened sample covariance matrix, which is constructed via $m$-dimensional $p $ signal-plus-noise samples and $m$-dimensional $n $ noise-only samples. A finite dimensional characterizatio… ▽ More Signal detection in colored noise with an unknown covariance matrix has a myriad of applications in diverse scientific/engineering fields. The test statistic is the largest generalized eigenvalue (l.g.e.) of the whitened sample covariance matrix, which is constructed via $m$-dimensional $p $ signal-plus-noise samples and $m$-dimensional $n $ noise-only samples. A finite dimensional characterization of this statistic under the alternative hypothesis has hitherto been an open problem. We answer this problem by deriving cumulative distribution function (c.d.f.) of this l.g.e. via the powerful orthogonal polynomial approach, exploiting the deformed Jacobi unitary ensemble (JUE). Two special cases and an asymptotic version of the c.d.f. are also derived. With this new c.d.f., we comprehensively analyze the receiver operating characteristics (ROC) of the detector. Importantly, when the noise-only covariant matrix is nearly rank deficient (i.e., $ m=n$), we show that (a) when $m$ and $p$ increase such that $m/p$ is fixed, at each fixed signal-to-noise ratio (SNR), there exists an optimal ROC profile. We also establish a tight approximation of it; and (b) asymptotically, reliable signal detection is always possible (no matter how weak the signal is) if SNR scales with $m$. △ Less

Submitted 7 February, 2019; originally announced February 2019.

Comments: arXiv admin note: text overlap with arXiv:1901.09568

MSC Class: 15B52; 15A18; 33C45; 33B15; 62E15

Detection of a Signal in Colored Noise: A Random Matrix Theory Based Analysis

Authors: Lahiru D. Chamain, Prathapasinghe Dharmawansa, Saman Atapattu, Chintha Tellambura

Abstract: This paper investigates the classical statistical signal processing problem of detecting a signal in the presence of colored noise with an unknown covariance matrix. In particular, we consider a scenario where m-dimensional p possible signal-plus-noise samples and m-dimensional n noise-only samples are available at the detector. Then the presence of a signal can be detected using the largest gener… ▽ More This paper investigates the classical statistical signal processing problem of detecting a signal in the presence of colored noise with an unknown covariance matrix. In particular, we consider a scenario where m-dimensional p possible signal-plus-noise samples and m-dimensional n noise-only samples are available at the detector. Then the presence of a signal can be detected using the largest generalized eigenvalue (l.g.e.) of the so called whitened sample covariance matrix. This amounts to statistically characterizing the maximum eigenvalue of the deformed Jacobi unitary ensemble (JUE). To this end, we employ the powerful orthogonal polynomial approach to determine a new finite dimensional expression for the cumulative distribution function (c.d.f.) of the l.g.e. of the deformed JUE. This new c.d.f. expression facilitates the further analysis of the receiver operating characteristics (ROC) of the detector. It turns out that, for m=n, when m and p increase such that m/p attains a fixed value, there exists an optimal ROC profile corresponding to each fixed signal-to-noise ratio (SNR). In this respect, we have established a tight approximation for the corresponding optimal ROC profile. △ Less

Submitted 28 January, 2019; originally announced January 2019.

Comments: Submitted to ISIT 2019

MSC Class: 62E15; 15B52; 15B57; 15A18

Outage Analysis of $2\times2 $ MIMO-MRC in Correlated Rician Fading

Authors: Prathapasinghe Dharmawansa, Kumara Kahatapitiya, Saman Atapattu, Chintha Tellambura

Abstract: This paper addresses one of the classical problems in random matrix theory-- finding the distribution of the maximum eigenvalue of the correlated Wishart unitary ensemble. In particular, we derive a new exact expression for the cumulative distribution function (c.d.f.) of the maximum eigenvalue of a $2\times 2$ correlated non-central Wishart matrix with rank-$1$ mean. By using this new result, we… ▽ More This paper addresses one of the classical problems in random matrix theory-- finding the distribution of the maximum eigenvalue of the correlated Wishart unitary ensemble. In particular, we derive a new exact expression for the cumulative distribution function (c.d.f.) of the maximum eigenvalue of a $2\times 2$ correlated non-central Wishart matrix with rank-$1$ mean. By using this new result, we derive an exact analytical expression for the outage probability of $2\times 2$ multiple-input multiple-output maximum-ratio-combining (MIMO-MRC) in Rician fading with transmit correlation and a strong line-of-sight (LoS) component (rank-$1$ channel mean). We also show that the outage performance is affected by the relative alignment of the eigen-spaces of the mean and correlation matrices. In general, when the LoS path aligns with the least eigenvector of the correlation matrix, in the {\it high} transmit signal-to-noise ratio (SNR) regime, the outage gradually improves with the increasing correlation. Moreover, we show that as $K$ (Rician factor) grows large, the outage event can be approximately characterized by the c.d.f. of a certain Gaussian random variable. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Comments: 7 pages

MSC Class: 62H10; 15B52;

Closed-Form Word Error Rate Analysis for Successive Interference Cancellation Decoders

Authors: **ming Wen, Keyu Wu, Chintha Tellambura, **zhi Fan

Abstract: We consider the estimation of an integer vector $\hbx\in \mathbb{Z}^n$ from the linear observation $\y=\A\hbx+\v$, where $\A\in\mathbb{R}^{m\times n}$ is a random matrix with independent and identically distributed (i.i.d.) standard Gaussian $\mathcal{N}(0,1)$ entries, and $\v\in \mathbb{R}^m$ is a noise vector with i.i.d. $\mathcal{N}(0,σ^2 )$ entries with given $σ$. In digital communications,… ▽ More We consider the estimation of an integer vector $\hbx\in \mathbb{Z}^n$ from the linear observation $\y=\A\hbx+\v$, where $\A\in\mathbb{R}^{m\times n}$ is a random matrix with independent and identically distributed (i.i.d.) standard Gaussian $\mathcal{N}(0,1)$ entries, and $\v\in \mathbb{R}^m$ is a noise vector with i.i.d. $\mathcal{N}(0,σ^2 )$ entries with given $σ$. In digital communications, $\hbx$ is typically uniformly distributed over an $n$-dimensional box $\mathcal{B}$. For this estimation problem, successive interference cancellation (SIC) decoders are popular due to their low complexity, and a detailed analysis of their word error rates (WERs) is highly useful. In this paper, we derive closed-form WER expressions for two cases: (1) $\hbx\in \mathbb{Z}^n$ is fixed and (2) $\hbx$ is uniformly distributed over $\mathcal{B}$. We also investigate some of their properties in detail and show that they agree closely with simulated word error probabilities. △ Less

Submitted 4 November, 2018; v1 submitted 27 August, 2018; originally announced August 2018.

Comments: To appear in IEEE Transactions on Wireless Communications

Analysis and Rate Optimization of GFDM-based Cognitive Radios

Authors: A. Mohammadian, M. Baghani, C. Tellambura

Abstract: Generalized frequency division multiplexing (GFDM) is suitable for cognitive radio (CR) networks due to its low out-of-band (OOB) emission and high spectral efficiency. In this paper, we thus consider the use of GFDM to allow an unlicensed secondary user (SU) to access a spectrum hole. However, in an extremely congested spectrum scenario, both active incumbent primary users (PUs) on the left and r… ▽ More Generalized frequency division multiplexing (GFDM) is suitable for cognitive radio (CR) networks due to its low out-of-band (OOB) emission and high spectral efficiency. In this paper, we thus consider the use of GFDM to allow an unlicensed secondary user (SU) to access a spectrum hole. However, in an extremely congested spectrum scenario, both active incumbent primary users (PUs) on the left and right channels of the spectrum hole will experience OOB interference. While constraining this interference, we thus investigate the problem of power allocation to the SU transmit subcarriers in order to maximize the overall data rate where the SU receiver is employing Matched filter (MF) and zero-forcing (ZF) structures. The power allocation problem is thus solved as a classic convex optimization problem. Finally, total transmission rate of GFDM is compared with that of orthogonal frequency division multiplexing (OFDM). For instance, when right and left interference temperature should be below 10 dBm, the capacity gain of GFDM over OFDM is 400 %. △ Less

Submitted 8 March, 2018; originally announced March 2018.

Outage Analysis of Ambient Backscatter Communication Systems

Authors: Wen**g Zhao, Gongpu Wang, Saman Atapattu, Chintha Tellambura

Abstract: This paper addresses the problem of outage characterization of an ambient backscatter communication system with a pair of passive tag and reader. In particular, an exact expression for the effective channel distribution is derived. Then, the outage probability at the reader is analyzed rigorously. Since the expression contains an infinite sum, a tight truncation error bound has been derived to fac… ▽ More This paper addresses the problem of outage characterization of an ambient backscatter communication system with a pair of passive tag and reader. In particular, an exact expression for the effective channel distribution is derived. Then, the outage probability at the reader is analyzed rigorously. Since the expression contains an infinite sum, a tight truncation error bound has been derived to facilitate precise numerical evaluations. Furthermore, an asymptotic expression is provided for high signal-to-noise ratio (SNR) regime. △ Less

Submitted 25 November, 2017; originally announced November 2017.

Comments: IEEE Communications Letter, 4 figures

Journal ref: IEEE Communications Letter, Volume: 22 , Issue: 8 , Aug. 2018

On the Success Probability of the Box-Constrained Rounding and Babai Detectors

Authors: Xiao-Wen Chang, **ming Wen, Chintha Tellambura

Abstract: In communications, one frequently needs to detect a parameter vector $\hbx$ in a box from a linear model. The box-constrained rounding detector $\x^\sBR$ and Babai detector $\x^\sBB$ are often used to detect $\hbx$ due to their high probability of correct detection, which is referred to as success probability, and their high efficiency of implimentation. It is generally believed that the success p… ▽ More In communications, one frequently needs to detect a parameter vector $\hbx$ in a box from a linear model. The box-constrained rounding detector $\x^\sBR$ and Babai detector $\x^\sBB$ are often used to detect $\hbx$ due to their high probability of correct detection, which is referred to as success probability, and their high efficiency of implimentation. It is generally believed that the success probability $P^\sBR$ of $\x^\sBR$ is not larger than the success probability $P^\sBB$ of $\x^\sBB$. In this paper, we first present formulas for $P^\sBR$ and $P^\sBB$ for two different situations: $\hbx$ is deterministic and $\hbx$ is uniformly distributed over the constraint box. Then, we give a simple example to show that $P^\sBR$ may be strictly larger than $P^\sBB$ if $\hbx$ is deterministic, while we rigorously show that $P^\sBR\leq P^\sBB$ always holds if $\hbx$ is uniformly distributed over the constraint box. △ Less

Submitted 19 April, 2017; originally announced April 2017.

Comments: to appear in ISIT 2017

Storage Allocation for Multi-Class Distributed Data Storage Systems

Authors: Koosha Pourtahmasi Roshandeh, Moslem Noori, Masoud Ardakani, Chintha Tellambura

Abstract: Distributed storage systems (DSSs) provide a scalable solution for reliably storing massive amounts of data coming from various sources. Heterogeneity of these data sources often means different data classes (types) exist in a DSS, each needing a different level of quality of service (QoS). As a result, efficient data storage and retrieval processes that satisfy various QoS requirements are needed… ▽ More Distributed storage systems (DSSs) provide a scalable solution for reliably storing massive amounts of data coming from various sources. Heterogeneity of these data sources often means different data classes (types) exist in a DSS, each needing a different level of quality of service (QoS). As a result, efficient data storage and retrieval processes that satisfy various QoS requirements are needed. This paper studies storage allocation, meaning how data of different classes must be spread over the set of storage nodes of a DSS. More specifically, assuming a probabilistic access to the storage nodes, we aim at maximizing the weighted sum of the probability of successful data recovery of data classes, when for each class a minimum QoS (probability of successful recovery) is guaranteed. Solving this optimization problem for a general setup is intractable. Thus, we find the optimal storage allocation when the data of each class is spread minimally over the storage nodes, i.e. minimal spreading allocation (MSA). Using upper bounds on the performance of the optimal storage allocation, we show that the optimal MSA allocation approaches the optimal performance in many practical cases. Computer simulations are also presented to better illustrate the results. △ Less

Submitted 23 January, 2017; originally announced January 2017.

A general framework for weighted sum-rate and common-rate optimization

Authors: Koosha Pourtahmasi Roshandeh, Masoud Ardakani, Chintha Tellambura

Abstract: In this paper, we propose a framework for solving a class of optimization problems encountered in a range of power allocation problems in wireless relay networks. In particular, power allocation for weighted sum-rate and common-rate optimization problems fall in this framework. Subject to some conditions on the region of feasible powers, the optimal solutions are analytically found. The optimizati… ▽ More In this paper, we propose a framework for solving a class of optimization problems encountered in a range of power allocation problems in wireless relay networks. In particular, power allocation for weighted sum-rate and common-rate optimization problems fall in this framework. Subject to some conditions on the region of feasible powers, the optimal solutions are analytically found. The optimization problems are posed in a general form and their solutions are shown to have applications in a number of practical scenarios. Numerical results verify the optimality of the analytical approach. △ Less

Submitted 4 July, 2016; originally announced July 2016.

Uplink and Downlink Rate Analysis of a Full-Duplex C-RAN with Radio Remote Head Association

Authors: Mohammadali Mohammadi, Himal A. Suraweera, Chintha Tellambura

Abstract: We characterize the uplink (UL) and downlink (DL) rates of a full-duplex cloud radio access network (C-RAN) with all participate and single best remote radio head (RRH) association schemes. Specifically, multi-antenna equipped RRHs distributed according to a Poisson point process is assumed. The UL and DL sum rate of the single best RRH association scheme is maximized using receive and transmit be… ▽ More We characterize the uplink (UL) and downlink (DL) rates of a full-duplex cloud radio access network (C-RAN) with all participate and single best remote radio head (RRH) association schemes. Specifically, multi-antenna equipped RRHs distributed according to a Poisson point process is assumed. The UL and DL sum rate of the single best RRH association scheme is maximized using receive and transmit beamformer designs at the UL and DL RRHs, respectively. In the case of the single best strategy, we study both optimum and sub-optimum schemes based on maximum ratio combining/maximal ratio transmission (MRC/MRT) and zero-forcing/MRT (ZF/MRT) processing. Numerical results show that significant performance improvements can be achieved by using the full-duplex mode as compared to the half-duplex mode. Moreover, the choice of the beamforming design and the RRH association scheme have a major influence on the achievable full-duplex gains. △ Less

Submitted 1 June, 2016; originally announced June 2016.

Comments: Invited Paper, EUSIPCO 2016, Accepted. arXiv admin note: text overlap with arXiv:1602.08836

Full-Duplex Cloud-RAN with Uplink/Downlink Remote Radio Head Association

Authors: Mohammadali Mohammadi, Himal A. Suraweera, Chintha Tellambura

Abstract: This paper considers a cloud radio access network (C-RAN) where spatially distributed remote radio heads (RRHs) communicate with a full-duplex user. In order to reflect a realistic scenario, the uplink (UL) and downlink (DL) RRHs are assumed to be equipped with multiple antennas and distributed according to a Poisson point process. We consider all participate and nearest RRH association schemes wi… ▽ More This paper considers a cloud radio access network (C-RAN) where spatially distributed remote radio heads (RRHs) communicate with a full-duplex user. In order to reflect a realistic scenario, the uplink (UL) and downlink (DL) RRHs are assumed to be equipped with multiple antennas and distributed according to a Poisson point process. We consider all participate and nearest RRH association schemes with distributed beamforming in the form of maximum ratio combining/maximal ratio transmission (MRC/MRT) and zero-forcing/MRT(ZF/MRT) processing. We derive analytical expressions useful to compare the average sum rate among association schemes as a function of the number of RRHs antennas and density of the UL and DL RRHs. Numerical results show that significant performance improvements can be achieved by using the full-duplex mode as compared to the half-duplex mode, while the choice of the beamforming design as well as the RRH association scheme plays a critical role in determining the full-duplex gains. △ Less

Submitted 29 February, 2016; originally announced February 2016.

Comments: Accepted for the IEEE International Conference on Communications (ICC 2016)

Full-Duplex Radio for Uplink/Downlink Wireless Access with Spatially Random Nodes

Authors: Mohammadali Mohammadi, Himal A. Suraweera, Yun Cao, Ioannis Krikidis, Chintha Tellambura

Abstract: A full-duplex (FD) multiple antenna access point (AP) communicating with single antenna half-duplex (HD) spatially random users to support simultaneous uplink (UL)/downlink (DL) transmissions is investigated. Since FD nodes are inherently constrained by the loopback interference (LI), we study precoding schemes for the AP based on maximum ratio combining (MRC)/maximal ratio transmission (MRT), zer… ▽ More A full-duplex (FD) multiple antenna access point (AP) communicating with single antenna half-duplex (HD) spatially random users to support simultaneous uplink (UL)/downlink (DL) transmissions is investigated. Since FD nodes are inherently constrained by the loopback interference (LI), we study precoding schemes for the AP based on maximum ratio combining (MRC)/maximal ratio transmission (MRT), zero-forcing and the optimal scheme for UL and DL sum rate maximization using tools from stochastic geometry. In order to shed insights into the system's performance, simple expressions for single antenna/perfect LI cancellation/negligible internode interference cases are also presented. We show that FD precoding at AP improves the UL/DL sum rate and hence a doubling of the performance of the HD mode is achievable. In particular, our results show that these impressive performance gains remain substantially intact even if the LI cancellation is imperfect. Furthermore, relative performance gap between FD and HD modes increases as the number of transmit/receive antennas becomes large, while with the MRC/MRT scheme, increasing the receive antenna number at FD AP, is more beneficial in terms of sum rate than increasing the transmit antenna number. △ Less

Submitted 23 October, 2015; originally announced October 2015.

Comments: Accepted for publication in IEEE Transactions on Communications

Full-Duplex Radio for Uplink/Downlink Transmission with Spatial Randomness

Authors: Mohammadali Mohammadi, Himal A. Suraweera, Ioannis Krikidis, Chintha Tellambura

Abstract: We consider a wireless system with a full-duplex (FD) access point (AP) that transmits to a scheduled user in the downlink (DL) channel, while receiving data from an user in the uplink (UL) channel at the same time on the same frequency. In this system, loopback interference (LI) at the AP and inter user interference between the uplink (UL) user and downlink (DL) user can cause performance degrada… ▽ More We consider a wireless system with a full-duplex (FD) access point (AP) that transmits to a scheduled user in the downlink (DL) channel, while receiving data from an user in the uplink (UL) channel at the same time on the same frequency. In this system, loopback interference (LI) at the AP and inter user interference between the uplink (UL) user and downlink (DL) user can cause performance degradation. In order to characterize the effects of LI and inter user interference, we derive closed-form expressions for the outage probability and achievable sum rate of the system. In addition an asymptotic analysis that reveals insights into the system behavior and performance degradation is presented. Our results indicate that under certain conditions, FD transmissions yield performance gains over half-duplex (HD) mode of operation. △ Less

Submitted 29 March, 2015; originally announced March 2015.

Comments: Accepted for the IEEE International Conference on Communications (ICC 2015)

Relay Selection and Performance Analysis in Multiple-User Networks

Authors: Saman Atapattu, Yindi **g, Hai Jiang, Chintha Tellambura

Abstract: This paper investigates the relay selection (RS) problem in networks with multiple users and multiple common amplify-and-forward (AF) relays. Considering the overall quality-of-service of the network, we first specify our definition of optimal RS for multiple-user relay networks. Then an optimal RS (ORS) algorithm is provided, which is a straightforward extension of an RS scheme in the literature… ▽ More This paper investigates the relay selection (RS) problem in networks with multiple users and multiple common amplify-and-forward (AF) relays. Considering the overall quality-of-service of the network, we first specify our definition of optimal RS for multiple-user relay networks. Then an optimal RS (ORS) algorithm is provided, which is a straightforward extension of an RS scheme in the literature that maximizes the minimum end-to-end receive signal-to-noise ratio (SNR) of all users. The complexity of the ORS is quadratic in both the number of users and the number of relays. Then a suboptimal RS (SRS) scheme is proposed, which has linear complexity in the number of relays and quadratic complexity in the number of users. Furthermore, diversity orders of both the ORS and the proposed SRS are theoretically derived and compared with those of a naive RS scheme and the single-user RS network. It is shown that the ORS achieves full diversity; while the diversity order of the SRS decreases with the the number of users. For two-user networks, the outage probabilities and array gains corresponding to the minimum SNR of the RS schemes are derived in closed forms. It is proved that the advantage of the SRS over the naive RS scheme increases as the number of relays in the network increases. Simulation results are provided to corroborate the analytical results. △ Less

Submitted 18 October, 2011; originally announced October 2011.

Annotated Raptor Codes

Authors: Kaveh Mahdaviani, Masoud Ardakani, Chintha Tellambura

Abstract: In this paper, an extension of raptor codes is introduced which keeps all the desirable properties of raptor codes, including the linear complexity of encoding and decoding per information bit, unchanged. The new design, however, improves the performance in terms of the reception rate. Our simulations show a 10% reduction in the needed overhead at the benchmark block length of 64,520 bits and with… ▽ More In this paper, an extension of raptor codes is introduced which keeps all the desirable properties of raptor codes, including the linear complexity of encoding and decoding per information bit, unchanged. The new design, however, improves the performance in terms of the reception rate. Our simulations show a 10% reduction in the needed overhead at the benchmark block length of 64,520 bits and with the same complexity per information bit. △ Less

Submitted 11 October, 2011; originally announced October 2011.

Comments: This paper has been Accepted for presentation in IEEE Information Theory Workshop (ITW) 2011, Paraty, Brazil

Improving the Sphere-Packing Bound for Binary Codes over Memoryless Symmetric Channels

Authors: Kaveh Mahdaviani, Shervin Shahidi, Shima Haddadi, Masoud Ardakani, Chintha Tellambura

Abstract: A lower bound on the minimum required code length of binary codes is obtained. The bound is obtained based on observing a close relation between the Ulam's liar game and channel coding. In fact, Spencer's optimal solution to the game is used to derive this new bound which improves the famous Sphere-Packing Bound. A lower bound on the minimum required code length of binary codes is obtained. The bound is obtained based on observing a close relation between the Ulam's liar game and channel coding. In fact, Spencer's optimal solution to the game is used to derive this new bound which improves the famous Sphere-Packing Bound. △ Less

Submitted 25 July, 2010; originally announced July 2010.

Comments: 5 pages,3 figures, Presented at the Forty-Seventh Annual Allerton Conference on Communication, Control, and Computing, Sep. 2009

Journal ref: Communication, Control, and Computing, 2009. Allerton 2009. 47th Annual Allerton Conference on , vol., no., pp.553-557, Sept. 30 2009-Oct. 2 2009

Optimal Bandwidth and Power Allocation for Sum Ergodic Capacity under Fading Channels in Cognitive Radio Networks

Authors: Xiaowen Gong, Sergiy A. Vorobyov, Chintha Tellambura

Abstract: This paper studies optimal bandwidth and power allocation in a cognitive radio network where multiple secondary users (SUs) share the licensed spectrum of a primary user (PU) under fading channels using the frequency division multiple access scheme. The sum ergodic capacity of all the SUs is taken as the performance metric of the network. Besides all combinations of the peak/average transmit power… ▽ More This paper studies optimal bandwidth and power allocation in a cognitive radio network where multiple secondary users (SUs) share the licensed spectrum of a primary user (PU) under fading channels using the frequency division multiple access scheme. The sum ergodic capacity of all the SUs is taken as the performance metric of the network. Besides all combinations of the peak/average transmit power constraints at the SUs and the peak/average interference power constraint imposed by the PU, total bandwidth constraint of the licensed spectrum is also taken into account. Optimal bandwidth allocation is derived in closed-form for any given power allocation. The structures of optimal power allocations are also derived under all possible combinations of the aforementioned power constraints. These structures indicate the possible numbers of users that transmit at nonzero power but below their corresponding peak powers, and show that other users do not transmit or transmit at their corresponding peak power. Based on these structures, efficient algorithms are developed for finding the optimal power allocations. △ Less

Submitted 25 June, 2010; originally announced June 2010.

Comments: 28 pages, 6 figures, submitted to the IEEE Trans. Signal Processing in June 2010

Journal ref: X. Gong, S.A. Vorobyov, C. Tellambura, "Optimal bandwidth and power allocation for sum ergodic capacity under fading channels in cognitive radio networks," IEEE Trans. Signal Processing, vol. 59, no. 4, pp. 1814-1826, Apr. 2011

Joint Bandwidth and Power Allocation with Admission Control in Wireless Multi-User Networks With and Without Relaying

Authors: Xiaowen Gong, Sergiy A. Vorobyov, Chintha Tellambura

Abstract: Equal allocation of bandwidth and/or power may not be efficient for wireless multi-user networks with limited bandwidth and power resources. Joint bandwidth and power allocation strategies for wireless multi-user networks with and without relaying are proposed in this paper for (i) the maximization of the sum capacity of all users; (ii) the maximization of the worst user capacity; and (iii) the mi… ▽ More Equal allocation of bandwidth and/or power may not be efficient for wireless multi-user networks with limited bandwidth and power resources. Joint bandwidth and power allocation strategies for wireless multi-user networks with and without relaying are proposed in this paper for (i) the maximization of the sum capacity of all users; (ii) the maximization of the worst user capacity; and (iii) the minimization of the total power consumption of all users. It is shown that the proposed allocation problems are convex and, therefore, can be solved efficiently. Moreover, the admission control based joint bandwidth and power allocation is considered. A suboptimal greedy search algorithm is developed to solve the admission control problem efficiently. The conditions under which the greedy search is optimal are derived and shown to be mild. The performance improvements offered by the proposed joint bandwidth and power allocation are demonstrated by simulations. The advantages of the suboptimal greedy search algorithm for admission control are also shown. △ Less

Submitted 7 June, 2010; originally announced June 2010.

Comments: 30 pages, 5 figures, submitted to IEEE Trans. Signal Processing in June 2010

Journal ref: X. Gong, S.A. Vorobyov, and C. Tellambura, "Joint bandwidth and power allocation with admission control in wireless multi-user networks with and without relaying," IEEE Trans. Signal Processing, vol. 59, no. 4, pp. 1801-1813, Apr. 2011

Four-Group Decodable Space-Time Block Codes

Authors: Dung Ngoc Dao, Chau Yuen, Chintha Tellambura, Yong Liang Guan, Tjeng Thiang Tjhung

Abstract: Two new rate-one full-diversity space-time block codes (STBC) are proposed. They are characterized by the \emph{lowest decoding complexity} among the known rate-one STBC, arising due to the complete separability of the transmitted symbols into four groups for maximum likelihood detection. The first and the second codes are delay-optimal if the number of transmit antennas is a power of 2 and even… ▽ More Two new rate-one full-diversity space-time block codes (STBC) are proposed. They are characterized by the \emph{lowest decoding complexity} among the known rate-one STBC, arising due to the complete separability of the transmitted symbols into four groups for maximum likelihood detection. The first and the second codes are delay-optimal if the number of transmit antennas is a power of 2 and even, respectively. The exact pair-wise error probability is derived to allow for the performance optimization of the two codes. Compared with existing low-decoding complexity STBC, the two new codes offer several advantages such as higher code rate, lower encoding/decoding delay and complexity, lower peak-to-average power ratio, and better performance. △ Less

Submitted 26 July, 2007; originally announced July 2007.

Comments: 1 figure. Accepted for publication in IEEE Trans. on Signal Processing