-
Thermal spin injection from a ferromagnet into graphene by transverse and longitudinal current
Authors:
Bin Yang,
Winfried Teizer
Abstract:
Graphene is a very promising material in spintronics due to both its high electric mobility and low intrinsic spin-obit coupling. Electronic spins can be injected from a ferromagnetic material through a tunnel contact into graphene owing to a spin relaxation length as high as 5μm. In recent years, a new approach creating spin current employed thermal effects and heat flow. Here, by applying transv…
▽ More
Graphene is a very promising material in spintronics due to both its high electric mobility and low intrinsic spin-obit coupling. Electronic spins can be injected from a ferromagnetic material through a tunnel contact into graphene owing to a spin relaxation length as high as 5μm. In recent years, a new approach creating spin current employed thermal effects and heat flow. Here, by applying transverse and longitudinal current to a grahene spin valve device, the interplay between the heat spin current and the charge spin current is investigated. The non-local spin voltage is enhanced by the thermal spin injection and the thermal spin voltage reaches a maximum close to the Dirac point which makes graphene a promising material for a future thermoelectric spin device due to its long spin lifetime and spin diffusion length.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Conditional Seq2Seq model for the time-dependent two-level system
Authors:
Bin Yang,
Mengxi Wu,
Winfried Teizer
Abstract:
We apply the deep learning neural network architecture to the two-level system in quantum optics to solve the time-dependent Schrodinger equation. By carefully designing the network structure and tuning parameters, above 90 percent accuracy in super long-term predictions can be achieved in the case of random electric fields, which indicates a promising new method to solve the time-dependent equati…
▽ More
We apply the deep learning neural network architecture to the two-level system in quantum optics to solve the time-dependent Schrodinger equation. By carefully designing the network structure and tuning parameters, above 90 percent accuracy in super long-term predictions can be achieved in the case of random electric fields, which indicates a promising new method to solve the time-dependent equation for two-level systems. By slightly modifying this network, we think that this method can solve the two- or three-dimensional time-dependent Schrodinger equation more efficiently than traditional approaches.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Large-scale chirality in an active layer of microtubules and kinesin motor proteins
Authors:
Kyongwan Kim,
Natsuhiko Yoshinaga,
Sanjib Bhattacharyya,
Hikaru Nakazawa,
Mitsuo Umetsu,
Winfried Teizer
Abstract:
During the early developmental process of organisms, the formation of the left-right laterality requires a subtle mechanism, as it is associated with other principal body axes. Any inherent chiral feature in an egg cell can in principal trigger this spontaneous breaking of chiral symmetry. Individual microtubules, major cytoskeletal filaments, are known as chiral objects. However, to date there la…
▽ More
During the early developmental process of organisms, the formation of the left-right laterality requires a subtle mechanism, as it is associated with other principal body axes. Any inherent chiral feature in an egg cell can in principal trigger this spontaneous breaking of chiral symmetry. Individual microtubules, major cytoskeletal filaments, are known as chiral objects. However, to date there lacks convincing evidence of a hierarchical connection of the molecular nature of microtubules to large-scale chirality, particularly at the length scale of an entire cell. Here we assemble an in-vitro active layer, consisting of microtubules and kinesin motor proteins, on a glass surface. Upon inclusion of methyl cellulose, the layered system exhibits a long-range active nematic phase, characterized by the global alignment of gliding MTs. This nematic order spans over the entire system size in the millimeter range and, remarkably, allows hidden collective chirality to emerge as counterclockwise global rotation of the active MT layer. The analysis based on our theoretical model suggests that the emerging global nematic order results from the local alignment of MTs, stabilized by methyl cellulose. It also suggests that the global rotation arises from the MTs' intrinsic curvature, leading to preferential handedness. Given its flexibility, this layered in-vitro cytoskeletal system enables the study of membranous protein behavior responsible for important cellular developmental processes.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Background Studies for the MINER Coherent Neutrino Scattering Reactor Experiment
Authors:
MINER Collaboration,
G. Agnolet,
W. Baker,
D. Barker,
R. Beck,
T. J. Carroll,
J. Cesar,
P. Cushman,
J. B. Dent,
S. De Rijck,
B. Dutta,
W. Flanagan,
M. Fritts,
Y. Gao,
H. R. Harris,
C. C. Hays,
V. Iyer,
A. Jastram,
F. Kadribasic,
A. Kennedy,
A. Kubik,
I. Ogawa,
K. Lang,
R. Mahapatra,
V. Mandic
, et al. (25 additional authors not shown)
Abstract:
The proposed Mitchell Institute Neutrino Experiment at Reactor (MINER) experiment at the Nuclear Science Center at Texas A&M University will search for coherent elastic neutrino-nucleus scattering within close proximity (about 2 meters) of a 1 MW TRIGA nuclear reactor core using low threshold, cryogenic germanium and silicon detectors. Given the Standard Model cross section of the scattering proce…
▽ More
The proposed Mitchell Institute Neutrino Experiment at Reactor (MINER) experiment at the Nuclear Science Center at Texas A&M University will search for coherent elastic neutrino-nucleus scattering within close proximity (about 2 meters) of a 1 MW TRIGA nuclear reactor core using low threshold, cryogenic germanium and silicon detectors. Given the Standard Model cross section of the scattering process and the proposed experimental proximity to the reactor, as many as 5 to 20 events/kg/day are expected. We discuss the status of preliminary measurements to characterize the main backgrounds for the proposed experiment. Both in situ measurements at the experimental site and simulations using the MCNP and GEANT4 codes are described. A strategy for monitoring backgrounds during data taking is briefly discussed.
△ Less
Submitted 7 September, 2016;
originally announced September 2016.
-
Stochastic Boltzmann Equation for Magnetic Relaxation in High-Spin Molecules
Authors:
Daniel M. Packwood,
Helmut G. Katzgraber,
Winfried Teizer
Abstract:
We introduce the stochastic Boltzmann equation (SBE) as an approach for exploring the spin dynamics of magnetic molecules coupled to a stochastic environment. The SBE is a time-evolution equation for the probability density of the spin density matrix of the system. This probability density is relevant to experiments which take measurements on single molecules, in which probabilities of observing p…
▽ More
We introduce the stochastic Boltzmann equation (SBE) as an approach for exploring the spin dynamics of magnetic molecules coupled to a stochastic environment. The SBE is a time-evolution equation for the probability density of the spin density matrix of the system. This probability density is relevant to experiments which take measurements on single molecules, in which probabilities of observing particular spin states (rather than ensemble averages) are of interest. By analogy with standard treatments of the regular Boltzmann equation, we propose a relaxation-time approximation for the SBE, and show that solutions to the SBE under the relaxation-time approximation can be obtained by performing simple trajectory simulations for the case of a boson gas environment. Cases where the relaxation-time approximation are satisfied can therefore be investigated by careful choice of the parameters for the boson gas environment, even if the actual environment is quite different from a boson gas. The application of the SBE approach is demonstrated through an illustrative example.
△ Less
Submitted 3 March, 2016;
originally announced March 2016.
-
Microtubule shuttles on kinesin-coated glass micro-wire tracks
Authors:
Kyongwan Kim,
Andrew L. Liao,
Aurelien Sikora,
Daniel Oliveira,
Hikaru Nakazawa,
Mitsuo Umetsu,
Izumi Kumagai,
Tadafumi Adschiri,
Wonmuk Hwangb,
Winfried Teizer
Abstract:
Gliding of microtubule filaments on surfaces coated with the motor protein kinesin has potential applications for nano-scale devices. The ability to guide the gliding direction in three dimensions allows the fabrication of tracks of arbitrary geometry in space. Here, we achieve this by using kinesin-coated glass wires of micrometer diameter range. Unlike previous methods in which the guiding track…
▽ More
Gliding of microtubule filaments on surfaces coated with the motor protein kinesin has potential applications for nano-scale devices. The ability to guide the gliding direction in three dimensions allows the fabrication of tracks of arbitrary geometry in space. Here, we achieve this by using kinesin-coated glass wires of micrometer diameter range. Unlike previous methods in which the guiding tracks are fixed on flat two-dimensional surfaces, the flexibility of glass wires in shape and size facilitates building in-vitro devices that have deformable tracks.
△ Less
Submitted 20 February, 2014;
originally announced February 2014.
-
Molecular Motor-Powered Shuttles along Multi-walled Carbon Nanotube Tracks
Authors:
Aurélien Sikora,
Javier Ramón-Azcón,
Kyongwan Kim,
Kelley Reaves,
Hikaru Nakazawa,
Mitsuo Umetsu,
Izumi Kumagai,
Tadafumi Adschiri,
Hitoshi Shiku,
Tomokazu Matsue,
Wonmuk Hwang,
Winfried Teizer
Abstract:
As a complementary tool to nanofluidics, biomolecular based transport is envisioned for nanotechnological devices. We report a new method for guiding microtubule shuttles on multi-walled carbon nanotube tracks, aligned by dielectrophoresis on a functionalized surface. In the absence of electric field and in fluid flow, alignment is maintained. The directed translocation of kinesin propelled microt…
▽ More
As a complementary tool to nanofluidics, biomolecular based transport is envisioned for nanotechnological devices. We report a new method for guiding microtubule shuttles on multi-walled carbon nanotube tracks, aligned by dielectrophoresis on a functionalized surface. In the absence of electric field and in fluid flow, alignment is maintained. The directed translocation of kinesin propelled microtubules has been investigated using fluorescence microscopy. To our knowledge, this is the first demonstration of microtubules gliding along carbon nanotubes.
△ Less
Submitted 11 December, 2013;
originally announced December 2013.
-
2D molecular magnets with weak topological invariant magnetic moments: Mathematical prediction of targets for chemical synthesis
Authors:
Daniel M. Packwood,
Kelley T. Reaves,
Filippo Leonida Federici,
Helmut G. Katzgraber,
Winfried Teizer
Abstract:
An open problem in applied mathematics is to predict interesting molecules which are realistic targets for chemical synthesis. In this paper, we use a spin Hamiltonian-type model to predict molecular magnets (MMs) with magnetic moments that are intrinsically robust under random shape deformations to the molecule. Using the concept of convergence in probability, we show that for MMs in which all sp…
▽ More
An open problem in applied mathematics is to predict interesting molecules which are realistic targets for chemical synthesis. In this paper, we use a spin Hamiltonian-type model to predict molecular magnets (MMs) with magnetic moments that are intrinsically robust under random shape deformations to the molecule. Using the concept of convergence in probability, we show that for MMs in which all spin centers lie in-plane and all spin center interactions are ferromagnetic, the total spin of the molecule is a `weak topological invariant' when the number of spin centers is sufficiently large. By weak topological invariant, we mean that the total spin of the molecule only depends upon the arrangement of spin centers in the molecule, and is unlikely to change under shape deformations to the molecule. Our calculations show that only between 20 and 50 spin centers are necessary for the total spin of these MMs to be a weak topological invariant. The robustness effect is particularly enhanced for 2D ferromagnetic MMs that possess a small number of spin rings in the structure.
△ Less
Submitted 1 September, 2013; v1 submitted 5 June, 2013;
originally announced June 2013.
-
STM Studies of Isolated Mn12-Ph Single Molecule Magnets
Authors:
Kelley Reaves,
Kyongwan Kim,
Katsuya Iwaya,
Taro Hitosugi,
Hanhua Zhao,
Kim R. Dunbar,
Helmut G. Katzgraber,
Winfried Teizer
Abstract:
We study Mn12O12(C6H5COO)16(H2O)4 (Mn12-Ph) single-molecule magnets on highly ordered pyrolytic graphite (HOPG) using low temperature scanning tunneling microscopy (LT-STM) experiments. We report Mn12-Ph in isolation, resembling single molecules with metallic core atoms and organic outer ligands. The local tunneling current observed within the molecular structure shows a strong bias voltage depend…
▽ More
We study Mn12O12(C6H5COO)16(H2O)4 (Mn12-Ph) single-molecule magnets on highly ordered pyrolytic graphite (HOPG) using low temperature scanning tunneling microscopy (LT-STM) experiments. We report Mn12-Ph in isolation, resembling single molecules with metallic core atoms and organic outer ligands. The local tunneling current observed within the molecular structure shows a strong bias voltage dependency, which is distinct from that of the HOPG surface. Further, evidence of internal inhomogeneity in the local density of states has been observed with high spatial resolution, and this inhomogeneity appears to be due to localized metallic behavior. These results facilitate magneto-metric studies of single molecule magnets in isolation. As compared to bulk crystal studies, our experiments allow the specific investigation of atomic sites in the molecule.
△ Less
Submitted 8 November, 2012; v1 submitted 22 October, 2012;
originally announced October 2012.
-
Avoided Crossing Patterns and Spectral Gaps of Surface Plasmon Modes in Gold Nano-Structures
Authors:
Alexandre Kolomenskii,
Siying Peng,
Jeshurun Hembd,
Andrei Kolomenski,
John Noel,
Winfried Teizer,
Hans Schuessler
Abstract:
The transmission of ultrashort (7 fs) broadband laser pulses through periodic gold nano-structures is studied. The distribution of the transmitted light intensity over wavelength and angle shows an efficient coupling of the incident p-polarized light to two counter-propagating surface plasmon (SP) modes. As a result of the mode interaction, the avoided crossing patterns exhibit energy and momentum…
▽ More
The transmission of ultrashort (7 fs) broadband laser pulses through periodic gold nano-structures is studied. The distribution of the transmitted light intensity over wavelength and angle shows an efficient coupling of the incident p-polarized light to two counter-propagating surface plasmon (SP) modes. As a result of the mode interaction, the avoided crossing patterns exhibit energy and momentum gaps, which depend on the configuration of the nano-structure and the wavelength. Variations of the widths of the SP resonances and an abrupt change of the mode interaction in the vicinity of the avoided crossing region are observed. These features are explained by the model of two coupled modes and a coupling change due to switching from the high frequency dark mode to the low frequency bright mode for increasing wavelength of the excitation light. PACS numbers: 73.20.Mf, 42.70.Qs, 42.25.-p,
△ Less
Submitted 1 April, 2010;
originally announced April 2010.
-
Interactions Between Mn_12-ac and Thin Gold Films: Using Mn_12-ac as Scattering Centers
Authors:
Joel Means,
Winfried Teizer
Abstract:
We explore the electronic interactions between a thin gold film and a surface layer of the molecular magnet Mn_12-acetate. Magnetoresistance measurements of the gold allow characterization of the interactions by comparison with the theoretical predictions of weak localization. We find that the presence of Mn_12-acetate on the surface of the gold film leads to a reduction in elastic scattering wh…
▽ More
We explore the electronic interactions between a thin gold film and a surface layer of the molecular magnet Mn_12-acetate. Magnetoresistance measurements of the gold allow characterization of the interactions by comparison with the theoretical predictions of weak localization. We find that the presence of Mn_12-acetate on the surface of the gold film leads to a reduction in elastic scattering while increasing the spin scattering of the conduction electrons. This is the first experimental evidence of molecular magnets being used as scattering centers for an adjacent metallic film.
△ Less
Submitted 11 October, 2008;
originally announced October 2008.
-
Analytic Density of States in the Abrikosov-Gorkov Theory
Authors:
R. V. A. Srivastava,
W. Teizer
Abstract:
Since the early 1960s, Abrikosov-Gorkov theory has been used to describe superconductors with paramagnetic impurities. Interestingly, the density of states resulting from the theoretical framework has to date only been known approximately, as a numeric solution of a complex polynomial. Here we introduce an exact analytic solution for the density of states of a superconductor with paramagnetic im…
▽ More
Since the early 1960s, Abrikosov-Gorkov theory has been used to describe superconductors with paramagnetic impurities. Interestingly, the density of states resulting from the theoretical framework has to date only been known approximately, as a numeric solution of a complex polynomial. Here we introduce an exact analytic solution for the density of states of a superconductor with paramagnetic impurities. The solution is valid in the whole regime of Abrikosov-Gorkov theory; both where there is an energy gap and gapless. While of fundamental interest, we argue that this solution also has computational benefits in the evaluation of integrals for tunneling conductances and allows for an analytic description of materials with densities of states that are modeled from the basic Abrikosov-Gorkov density of states.
△ Less
Submitted 16 February, 2007;
originally announced February 2007.
-
Enhanced Magnetic Anisotropy of Mn12-acetate
Authors:
D. M. Seo,
V. Meenakshi,
W. Teizer,
H. Zhao,
K. R. Dunbar
Abstract:
Thin films of the Single Molecule Magnet (Mn12-acetate) have been fabricated on a Si-substrate by the Dip-and-Dry method, a simple and robust technique. Atomic force microscopy and X-ray photoelectron spectroscopy characterizations reveal that homogeneous, thin films of a few molecular layers with smoothness at the molecular level are deposited. Significant changes in magnetic properties of Mn12…
▽ More
Thin films of the Single Molecule Magnet (Mn12-acetate) have been fabricated on a Si-substrate by the Dip-and-Dry method, a simple and robust technique. Atomic force microscopy and X-ray photoelectron spectroscopy characterizations reveal that homogeneous, thin films of a few molecular layers with smoothness at the molecular level are deposited. Significant changes in magnetic properties of Mn12-acetate exposed to the same solvent were observed in zero-field-cooled and field-cooled magnetization, as well as ac-susceptibility measurements. The blocking temperature was found to increase to TB > 10 K at low magnetic fields, indicating an enhanced magnetic anisotropy.
△ Less
Submitted 15 June, 2005;
originally announced June 2005.
-
Films of Mn12-acetate deposited by low-energy laser ablation
Authors:
J. Means,
V. Meenakshi,
R. V. A. Srivastava,
W. Teizer,
Al. A. Kolomenskii,
H. A. Schuessler,
H. Zhao,
K. R. Dunbar
Abstract:
Thin films of the molecular magnet Mn12-acetate, [Mn12 O12(CH3COO)16 (H2O)4] 2CH3COOH 4H2O, have been prepared using a laser ablation technique with a nitrogen laser at low laser energies of 0.8 and 2 mJ. Chemical and magnetic characterizations show that the Mn12-acetate cores remain intact and the films show similar magnetic properties to those of the parent molecular starting material. In addi…
▽ More
Thin films of the molecular magnet Mn12-acetate, [Mn12 O12(CH3COO)16 (H2O)4] 2CH3COOH 4H2O, have been prepared using a laser ablation technique with a nitrogen laser at low laser energies of 0.8 and 2 mJ. Chemical and magnetic characterizations show that the Mn12-acetate cores remain intact and the films show similar magnetic properties to those of the parent molecular starting material. In addition, the magnetic data exhibit a peak in the magnetization at 27 K indicating the creation of an additional magnetic phase not noted in previous studies of crystalline phases.
△ Less
Submitted 3 September, 2004;
originally announced September 2004.
-
Films of Mn12-acetate by Pulsed Laser Evaporation
Authors:
V. Meenakshi,
W. Teizer,
D. G. Naugle,
H. Zhao,
K. R. Dunbar
Abstract:
Films of the molecular nanomagnet, Mn12-acetate, have been deposited using pulsed laser deposition and a novel variant, matrix assisted pulsed laser evaporation. The films have been characterized by X-ray photoelectron spectroscopy, mass spectrometry and magnetic hysteresis. The results indicate that an increase in laser energy and/or pulse frequency leads to fragmentation of Mn12, whereas its c…
▽ More
Films of the molecular nanomagnet, Mn12-acetate, have been deposited using pulsed laser deposition and a novel variant, matrix assisted pulsed laser evaporation. The films have been characterized by X-ray photoelectron spectroscopy, mass spectrometry and magnetic hysteresis. The results indicate that an increase in laser energy and/or pulse frequency leads to fragmentation of Mn12, whereas its chemical and magnetic integrity is preserved at low laser energy (200 mJ). This technique allows the fabrication of patterned thin film systems of molecular nanomagnets for fundamental and applied experiments.
△ Less
Submitted 2 September, 2004;
originally announced September 2004.
-
Mn12-acetate film pattern generated by photolithography methods
Authors:
K. Kim,
D. M. Seo,
J. Means,
V. Meenakshi,
W. Teizer,
H. Zhao,
K. R. Dunbar
Abstract:
We demonstrate a straightforward way to lithographically fabricate Mn12-acetate (Mn12O12(CH3COO)16(H2O)4 2CH3COOH 4H2O) thin film patterns on Si/SiO2 surfaces, a significant step in light of the chemical volatility of this organic complex. Atomic force microscopy (AFM) images of the film patterns allow the determination of the pattern dimensions. X-ray photoelectron spectroscopy (XPS) data indic…
▽ More
We demonstrate a straightforward way to lithographically fabricate Mn12-acetate (Mn12O12(CH3COO)16(H2O)4 2CH3COOH 4H2O) thin film patterns on Si/SiO2 surfaces, a significant step in light of the chemical volatility of this organic complex. Atomic force microscopy (AFM) images of the film patterns allow the determination of the pattern dimensions. X-ray photoelectron spectroscopy (XPS) data indicate that the patterned material is the intact Mn12-acetate complex. Magnetic measurements of the Mn12-acetate film confirm that the film properties are reminiscent of crystalline Mn12-acetate, suggesting that this approach can be used to fabricate lithographically patterned devices of Mn12-acetate.
△ Less
Submitted 2 September, 2004;
originally announced September 2004.
-
Spin-Hall and spin-diagonal conductivity in the presence of Rashba and Dresselhaus spin-orbit coupling
Authors:
N. A. Sinitsyn,
E. M. Hankiewicz,
W. Teizer,
Jairo Sinova
Abstract:
We investigate the spin-current linear response conductivity tensor to an electric field in a paramagnetic two dimensonal electron gas with both Rashba and Dresselhaus spin-orbit coupling in the weak scattering regime. In the ususal case where both spin-orbit-split bands are occupied, we find that the spin-Hall conductivity depends only on the sign of the difference in magnitude of the Rashba an…
▽ More
We investigate the spin-current linear response conductivity tensor to an electric field in a paramagnetic two dimensonal electron gas with both Rashba and Dresselhaus spin-orbit coupling in the weak scattering regime. In the ususal case where both spin-orbit-split bands are occupied, we find that the spin-Hall conductivity depends only on the sign of the difference in magnitude of the Rashba and Dresselhaus coupling strengths except within a narrow window where both coupling strengths are equal. We also find a new effect in which a spin current is generated in the direction of the driving field whenever the Dresselhaus spin-orbit coupling is nonzero. We discuss experimental implications of this finding taking into account the finite mobility and typical parameters of current samples and possible experimental set ups for its detection.
△ Less
Submitted 14 October, 2003;
originally announced October 2003.
-
Variation of the density of states in amorphous GdSi at the metal-insulator transition
Authors:
L. Bokacheva,
W. Teizer,
F. Hellman,
R. C. Dynes
Abstract:
We performed detailed conductivity and tunneling mesurements on the amorphous, magnetically doped material $α$-Gd$_x$Si$_{1-x}$ (GdSi), which can be driven through the metal-insulator transition by the application of an external magnetic field. Conductivity increases linearly with field near the transition and slightly slower on the metallic side. The tunneling conductance, proportional to the d…
▽ More
We performed detailed conductivity and tunneling mesurements on the amorphous, magnetically doped material $α$-Gd$_x$Si$_{1-x}$ (GdSi), which can be driven through the metal-insulator transition by the application of an external magnetic field. Conductivity increases linearly with field near the transition and slightly slower on the metallic side. The tunneling conductance, proportional to the density of states $N(E)$, undergoes a gradual change with increasing field, from insulating, showing a soft gap at low bias, with a slightly weaker than parabolic energy dependence, i.e. $N(E) \sim E^c$, $c \lesssim 2$, towards metallic behavior, with $E^d$, $0.5 \lt d \lt 1$ energy dependence. The density of states at the Fermi level appears to be zero at low fields, as in an insulator, while the sample shows already small, but metal-like conductivity. We suggest a possible explanation to the observed effect.
△ Less
Submitted 26 September, 2003;
originally announced September 2003.
-
Fluctuation Dominated Josephson Tunneling with a Scanning Tunneling Microscope
Authors:
O. Naaman,
W. Teizer,
R. C. Dynes
Abstract:
We demonstrate Josephson tunneling in vacuum tunnel junctions formed between a superconducting scanning tunneling microscope tip and a Pb film, for junction resistances in the range 50-300 k$Ω$. We show that the superconducting phase dynamics is dominated by thermal fluctuations, and that the Josephson current appears as a peak centered at small finite voltages. In the presence of microwave fiel…
▽ More
We demonstrate Josephson tunneling in vacuum tunnel junctions formed between a superconducting scanning tunneling microscope tip and a Pb film, for junction resistances in the range 50-300 k$Ω$. We show that the superconducting phase dynamics is dominated by thermal fluctuations, and that the Josephson current appears as a peak centered at small finite voltages. In the presence of microwave fields (f=15.0 GHz) the peak decreases in magnitude and shifts to higher voltages with increasing rf power, in agreement with theory.
△ Less
Submitted 9 March, 2001;
originally announced March 2001.
-
The fabrication of reproducible superconducting scanning tunneling microscope tips
Authors:
O. Naaman,
W. Teizer,
R. C. Dynes
Abstract:
Superconducting scanning tunneling microscope tips have been fabricated with a high degree of reproducibility. The fabrication process relies on sequential deposition of superconducting Pb and a proximity-coupled Ag cap** layer onto a Pt/Ir tip. The tips were characterized by tunneling into both normal-metal and superconducting films. The simplicity of the fabrication process, along with the s…
▽ More
Superconducting scanning tunneling microscope tips have been fabricated with a high degree of reproducibility. The fabrication process relies on sequential deposition of superconducting Pb and a proximity-coupled Ag cap** layer onto a Pt/Ir tip. The tips were characterized by tunneling into both normal-metal and superconducting films. The simplicity of the fabrication process, along with the stability and reproducibility of the tips, clear the way for tunneling studies with a well-characterized, scannable superconducting electrode.
△ Less
Submitted 1 November, 2000;
originally announced November 2000.
