Showing 1–22 of 22 results for author: Team, t J

Runaway electron beam formation, vertical motion, termination and wall loads in EU-DEMO

Authors: F. Vannini, V. Bandaru, H. Bergstroem, N. Schwarz, F. J. Artola, M. Hoelzl, G. Pautasso, E. Nardon, F. Maviglia, M. L. Richiusa, E. Emanuelli, the JOREK team

Abstract: Runaway electron loads onto material structures are a major concern for future large tokamaks due to the efficient avalanching at high plasma currents. Here, we perform predictive studies using the JOREK code for a plausible plasma configuration in the European DEMO fusion power plant with focus on a pessimistic scenario in which a multi mega-ampere runaway electron beam is formed. The work first… ▽ More Runaway electron loads onto material structures are a major concern for future large tokamaks due to the efficient avalanching at high plasma currents. Here, we perform predictive studies using the JOREK code for a plausible plasma configuration in the European DEMO fusion power plant with focus on a pessimistic scenario in which a multi mega-ampere runaway electron beam is formed. The work first comprises axisymmetric predictions of runaway electron beam formation in a mitigated scenario and of the simultaneous vertical motion of the beam due to loss of position control. The subsequent runaway electron beam termination triggered by a burst of MHD activity during the course of the vertical motion is then simulated in 3D with the runaway electron fluid self-consistently coupled to the MHD modes. Finally, the resulting deposition pattern of the runaway electrons onto wall structures is calculated with a relativistic test particle approach. This way, the suitability of a possible sacrificial limiter concept for the protection of first wall components is assessed. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Submillimeter and Mid-Infrared Variability of Young Stellar Objects in the M17SWex Intermediate-Mass Star-Forming Region

Authors: Geumsook Park, Doug Johnstone, Carlos Contreras Pena, Jeong-Eun Lee, Sheng-Yuan Liu, Gregory Herczeg, Steve Mairs, Zhiwei Chen, Jennifer Hatchell, Kee-Tae Kim, Mi-Ryang Kim, Ke** Qiu, Yao-Te Wang, Xu Zhang, The JCMT Transient Team

Abstract: We present a comprehensive analysis of young stellar object (YSO) variability within the M17 Southwest Extension (M17 SWex), using 3.5 years of monitoring data from the JCMT Transient Survey at sub-millimeter (sub-mm) and 9 years from the NEOWISE mission at mid-infrared (mid-IR). Our study encompasses observations of 147 bright sub-mm peaks identified within our deep JCMT co-added map as well as 1… ▽ More We present a comprehensive analysis of young stellar object (YSO) variability within the M17 Southwest Extension (M17 SWex), using 3.5 years of monitoring data from the JCMT Transient Survey at sub-millimeter (sub-mm) and 9 years from the NEOWISE mission at mid-infrared (mid-IR). Our study encompasses observations of 147 bright sub-mm peaks identified within our deep JCMT co-added map as well as 156 YSOs in NEOWISE W1 and 179 in W2 that were previously identified in Spitzer surveys. We find three robust sub-mm variables: two are candidate YSOs and one is a likely extragalactic source. At mid-IR wavelengths, our analysis reveals secular and stochastic variability in 47 YSOs, with the highest fraction of secular variability occurring at the earliest evolutionary stage. This is similar to what has previously been observed for low-mass YSO variability within the Gould Belt. However, we observe less overall variability in M17SWex at both the sub-mm and mid-IR. We suspect that this lower fraction is due to the greater distance to M17 SWex. Our findings showcase the utility of multi-wavelength observations to better capture the complex variability phenomena inherent to star formation processes and demonstrate the importance of years-long monitoring of a diverse selection of star-forming environments. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: Accepted for Publication in The Astronomical Journal

3D MHD modelling of plasmoid drift following massive material injection in a tokamak

Authors: M. Kong, E. Nardon, D. Bonfiglio, M. Hoelzl, D. Hu, the JOREK team, the EUROfusion Tokamak Exploitation Team

Abstract: Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both e… ▽ More Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both ends of the plasmoid ("SAW braking") and the development of external resistive currents along magnetic field lines ("Pégourié braking") in limiting charge separation and thus the $\mathbf{E}\times \mathbf{B}$ plasmoid drift, where $\mathbf{E}$ and $\mathbf{B}$ are the electric and magnetic fields, respectively. The drift velocity is found to be limited by the SAW braking for cases with relatively small source amplitude while the Pégourié braking is shown to be stronger with larger toroidal extent of the source, both in good agreement with existing theory. The simulations also identity the key role of the size of the $\mathbf{E}\times \mathbf{B}$ flow region on plasmoid drift and show that the saturated velocity caused by dominant SAW braking agrees well with theory when considering an effective pressure within the $\mathbf{E}\times \mathbf{B}$ flow region. The existence of SAWs in the simulations is demonstrated and the 3D picture of plasmoid drift is also discussed. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: To be submitted to Nuclear Fusion

Neural-Parareal: Dynamically Training Neural Operators as Coarse Solvers for Time-Parallelisation of Fusion MHD Simulations

Authors: S. J. P. Pamela, N. Carey, J. Brandstetter, R. Akers, L. Zanisi, J. Buchanan, V. Gopakumar, M. Hoelzl, G. Huijsmans, K. Pentland, T. James, G. Antonucci, the JOREK Team

Abstract: The fusion research facility ITER is currently being assembled to demonstrate that fusion can be used for industrial energy production, while several other programmes across the world are also moving forward, such as EU-DEMO, CFETR, SPARC and STEP. The high engineering complexity of a tokamak makes it an extremely challenging device to optimise, and test-based optimisation would be too slow and to… ▽ More The fusion research facility ITER is currently being assembled to demonstrate that fusion can be used for industrial energy production, while several other programmes across the world are also moving forward, such as EU-DEMO, CFETR, SPARC and STEP. The high engineering complexity of a tokamak makes it an extremely challenging device to optimise, and test-based optimisation would be too slow and too costly. Instead, digital design and optimisation must be favored, which requires strongly-coupled suites of High-Performance Computing calculations. In this context, having surrogate models to provide quick estimates with uncertainty quantification is essential to explore and optimise new design options. Furthermore, these surrogates can in turn be used to accelerate simulations in the first place. This is the case of Parareal, a time-parallelisation method that can speed-up large HPC simulations, where the coarse-solver can be replaced by a surrogate. A novel framework, Neural-Parareal, is developed to integrate the training of neural operators dynamically as more data becomes available. For a given input-parameter domain, as more simulations are being run with Parareal, the large amount of data generated by the algorithm is used to train new surrogate models to be used as coarse-solvers for future Parareal simulations, leading to progressively more accurate coarse-solvers, and thus higher speed-up. It is found that such neural network surrogates can be much more effective than traditional coarse-solver in providing a speed-up with Parareal. This study is a demonstration of the convergence of HPC and AI which simply has to become common practice in the world of digital engineering design. △ Less

Submitted 2 May, 2024; originally announced May 2024.

Implementation of matrix compression in the coupling of JOREK to realistic 3D conducting wall structures

Authors: Federico Cipolletta, Nina Schwarz, Matthias Hoelzl, Salvatore Ventre, Nicola Isernia, Guglielmo Rubinacci, Alejandro Soba, Mervi Johanna Mantsinen, the JOREK Team

Abstract: JOREK is an advanced non-linear simulation code for studying MHD instabilities in magnetically confined fusion plasmas and their control and/or mitigation. A free-boundary and resistive wall extension was introduced via coupling to the STARWALL and CARIDDI codes, both able to provide dense response matrices describing the electromagnetic interactions between plasma and conducting structures. For d… ▽ More JOREK is an advanced non-linear simulation code for studying MHD instabilities in magnetically confined fusion plasmas and their control and/or mitigation. A free-boundary and resistive wall extension was introduced via coupling to the STARWALL and CARIDDI codes, both able to provide dense response matrices describing the electromagnetic interactions between plasma and conducting structures. For detailed CAD representations of the conducting structures and high resolutions for the plasma region, memory and computing time limitations restrict the possibility of simulating the ITER tokamak. In the present work, the Singular Value Decomposition provided by routines from the ScaLAPACK library has been successfully applied to compress some of the dense response matrices and thus optimize memory usage. This is demonstrated for simulations of Tearing Mode and Vertical Displacement Event instabilities. An outlook to future applications on large production cases and further extensions of the method are discussed. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Comments: 19 pages, 9 figures, firstly presented at the 4th Fusion HPC Workshop in November 2023, submitted to Plasma Physics and Controlled Fusion in April 2024

Nonlinear MHD modeling of soft $β$ limits in W7-AS

Authors: Rohan Ramasamy, Ksenia Aleynikova, Nikita Nikulsin, Florian Hindenlang, Ihor Holod, Erika Strumberger, Matthias Hoelzl, the JOREK team

Abstract: An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid c… ▽ More An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid compression by including the influence of parallel flows. Linear benchmarks of a (2, 1) tearing mode in W7-AS geometry, and interchange modes in a finite $β$, net-zero current carrying stellarator with low magnetic shear are then used to demonstrate the modeling capabilities. Finally, a validation study is conducted on experimental reconstructions of finite $β$ W7-AS discharges. In agreement with past experimental analysis, it is shown that (i) the MHD activity is resistive, (ii) a soft $β$ limit is observed, when the plasma resistivity approaches the estimated experimental value, and (iii) low $n$ MHD activity is observed at intermediate $β$ values, particularly a nonlinearly dominant (2, 1) mode. The MHD activity is mild, explaining the soft $β$ limit, because the plasma volume remains separated into distinct sub-volumes in which field lines are ergodically confined. For the assumed transport parameters, the enhanced perpendicular transport along stochastic magnetic field lines can be overcome with the experimental heating power. The limitations in the current modeling are described, alongside an outlook for characterising soft $β$ limits in more detail in future work. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: Submitted to Nuclear Fusion

The JCMT Transient Survey: Six-Year Summary of 450/850\,$μ$m Protostellar Variability and Calibration Pipeline Version 2.0

Authors: Steve Mairs, Seonjae Lee, Doug Johnstone, Colton Broughton, Jeong-Eun Lee, Gregory J. Herczeg, Graham S. Bell, Zhiwei Chen, Carlos Contreras-Peña, Logan Francis, Jennifer Hatchell, Mi-Ryang Kim, Sheng-Yuan Liu, Geumsook Park, Ke** Qiu, Yao-Te Wang, Xu Zhang, The JCMT Transient Team

Abstract: The JCMT Transient Survey has been monitoring eight Gould Belt low-mass star-forming regions since December 2015 and six somewhat more distant intermediate-mass star-forming regions since February 2020 with SCUBA-2 on the JCMT at \ShortS and \LongS and with an approximately monthly cadence. We introduce our Pipeline v2 relative calibration procedures for image alignment and flux calibration across… ▽ More The JCMT Transient Survey has been monitoring eight Gould Belt low-mass star-forming regions since December 2015 and six somewhat more distant intermediate-mass star-forming regions since February 2020 with SCUBA-2 on the JCMT at \ShortS and \LongS and with an approximately monthly cadence. We introduce our Pipeline v2 relative calibration procedures for image alignment and flux calibration across epochs, improving on our previous Pipeline v1 by decreasing measurement uncertainties and providing additional robustness. These new techniques work at both \LongS and \ShortNS, where v1 only allowed investigation of the \LongS data. Pipeline v2 achieves better than $0.5^{\prime\prime}$ relative image alignment, less than a tenth of the submillimeter beam widths. The v2 relative flux calibration is found to be 1\% at \LongS and $<5$\% at \ShortNS. The improvement in the calibration is demonstrated by comparing the two pipelines over the first four years of the survey and recovering additional robust variables with v2. Using the full six years of the Gould Belt survey the number of robust variables increases by 50\,\%, and at \ShortS we identify four robust variables, all of which are also robust at \LongNS. The multi-wavelength light curves for these sources are investigated and found to be consistent with the variability being due to dust heating within the envelope in response to accretion luminosity changes from the central source. △ Less

Submitted 7 January, 2024; originally announced January 2024.

Comments: Accepted for Publication in the The Astrophysical Journal. DOI link to data will become public after the proof stage is complete

Validation of the plasma-wall self-organization model for density limit in ECRH-assisted start-up of Ohmic discharges on J-TEXT

Authors: Jiaxing Liu, ** Zhu, Dominique Franck Escande, Junli Zhang, Donghui Xia, Yuhan Wang, Jiaming Wang, Qinghu Yang, Jiangang Fang, Li Gao, Zhifeng Cheng, Zhipeng Chen, Zhoujun Yang, Zhongyong Chen, Yonghua Ding, Yuan Pan, the J-TEXT team

Abstract: A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled ga… ▽ More A recently developed plasma-wall self-organization (PWSO) model predicts a significantly enhanced density limit, which may be attainable in tokamaks with ECRH-assisted ohmic startup and sufficiently high initial neutral density. Experiments have been conducted on J-TEXT to validate such a density limit scenario based on this model. Experimental results demonstrate that increasing the pre-filled gas pressure or ECRH power during the startup phase can effectively enhance plasma purity and raise the density limit at the flat-top. Despite the dominant carbon fraction in the wall material, some discharges approach the edge of the density-free regime of the 1D model of PWSO. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 17 pages, 8 figures

Probing non-linear MHD stability of the EDA H-mode in ASDEX Upgrade

Authors: A Cathey, M Hoelzl, L Gil, MG Dunne, GF Harrer, GTA Huijsmans, J Kalis, K Lackner, SJP Pamela, E Wolfrum, S Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non… ▽ More Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non-linear simulations with the visco-resistive extended MHD code, JOREK, sustain non-axisymmetric perturbations that are linearly most unstable with toroidal mode numbers of n = \{6 \dots 9\}, but non-linearly higher and lower n become driven and the low-n become dominant. The poloidal mode velocity during the linear phase is found to correspond to the expected velocity for resistive ballooning modes. The perturbations that exist in the simulations have somewhat smaller poloidal wavenumbers (k_θ \sim 0.1 to 0.5 cm^{-1} ) than the experimental expectations for the quasi-coherent mode in EDA, and cause non-negligible transport in both the heat and particle channels. In the transition from linear to non-linear phase, the mode frequency chirps down from approximately 35 kHz to 13 kHz, which corresponds approximately to the lower end of frequencies that are typically observed in EDA H-modes in ASDEX Upgrade. △ Less

Submitted 22 January, 2023; originally announced January 2023.

The JCMT Transient Survey: Single Epoch Transients and Variability of Faint Sources

Authors: Doug Johnstone, Bhavana Lalchand, Steve Mairs, Hsien Shang, Wen ** Chen, Geoffrey C. Bower, Gregory J. Herczeg, Jeong-Eun Lee, Jan Forbrich, Bo-Yan Chen, Carlos Contreras-Pena, Yong-Hee Lee, Wooseok Park, Colton Broughton, Spencer Plovie, The JCMT Transient Team

Abstract: Short-duration flares at millimeter wavelengths provide unique insights into the strongest magnetic reconnection events in stellar coronae, and combine with longer-term variability to introduce complications to next-generation cosmology surveys. We analyze 5.5 years of JCMT Transient Survey 850 micron submillimeter monitoring observations toward eight Gould Belt star-forming regions to search for… ▽ More Short-duration flares at millimeter wavelengths provide unique insights into the strongest magnetic reconnection events in stellar coronae, and combine with longer-term variability to introduce complications to next-generation cosmology surveys. We analyze 5.5 years of JCMT Transient Survey 850 micron submillimeter monitoring observations toward eight Gould Belt star-forming regions to search for evidence of transient events or long-duration variability from faint sources. The eight regions (30 arcmin diameter fields), including ~1200 infrared-selected YSOs, have been observed on average 47 times with integrations of approximately half an hour, or one day total spread over 5.5 years. Within this large data set, only two robust faint source detections are recovered: JW 566 in OMC 2/3 and MGM12 2864 in NGC 2023. JW 566, a Class II TTauri binary system previously identified as an extraordinary submillimeter flare, remains unique, the only clear single-epoch transient detection in this sample with a flare eight times bright than our ~4.5 sigma detection threshold of 55 mJy/beam. The lack of additional recovered flares intermediate between JW 566 and our detection limit is puzzling, if smaller events are more common than larger events. In contrast, the other submillimeter variable identified in our analysis, Source 2864, is highly variable on all observed timescales. Although Source 2864 is occasionally classified as a YSO, the source is most likely a blazar. The degree of variability across the electromagnetic spectrum may be used to aid source classification. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Comments: Accepted for publication in the Astrophysicall Journal. 17 pages, 6 figures, 2 tables

Modelling of saturated external MHD instabilities in tokamaks: a comparison of 3D free boundary equilibria and nonlinear stability calculations

Authors: Rohan Ramasamy, Guillermo Bustos Ramirez, Matthias Hoelzl, Jonathan Graves, Guillermo Suárez López, Karl Lackner, Sibylle Günter, the JOREK team

Abstract: 3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this inv… ▽ More 3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this investigation is to understand the extent to which the modelling approaches agree, and identify the important physical effects which can modify the dynamics. For the simulated external kink, which is dominated by a single toroidal harmonic, good agreement is found when a large Lundquist number is used in the JOREK simulation, such that resistive effects are sub-dominant. Modelling EHOs where multiple toroidal harmonics are linearly unstable, the saturated perturbation observed can differ in the dominant toroidal harmonic. On the ideal timescale, a n=2 EHO is observed in JOREK, while the saturated perturbation predicted by VMEC is a n=1 mode. Extending simulations into timescales where resistive effects can play a role, similar n=1 perturbations can be found. The coupling of different linearly unstable toroidal harmonics in the JOREK simulation broadens the magnetic energy spectrum and ergodises the plasma edge region, resulting in a more localised pressure perturbation. These effects are not observed in VMEC, because closed magnetic flux surfaces are enforced. Despite the sensitivity of JOREK results on the assumed resistivity, saturated states can be found using both approaches that are in reasonable agreement, even for this more advanced case. △ Less

Submitted 3 June, 2022; v1 submitted 9 March, 2022; originally announced March 2022.

Comments: Submitted to Physics of Plasmas, with revisions from review process included

Dissecting the different components of the modest accretion bursts of the very young protostar HOPS 373

Authors: Sung-Yong Yoon, Gregory J. Herczeg, Jeong-Eun Lee, Ho-Gyu Lee, Doug Johnstone, Watson Varricatt, John J. Tobin, Carlos Contreras Peña, Steve Mairs, Klaus Hodapp, P. Manoj, Mayra Osorio, S. Thomas Megeath, the JCMT Transient Team

Abstract: Observed changes in protostellar brightness can be complicated to interpret. In our JCMT~Transient monitoring survey, we discovered that a young binary protostar, HOPS 373, is undergoing a modest $30\%$ brightness increase at 850 $μ$m, caused by a factor of 1.8$-$3.3 enhancement in the accretion rate. The initial burst occurred over a few months, with a sharp rise and then shallower decay. A secon… ▽ More Observed changes in protostellar brightness can be complicated to interpret. In our JCMT~Transient monitoring survey, we discovered that a young binary protostar, HOPS 373, is undergoing a modest $30\%$ brightness increase at 850 $μ$m, caused by a factor of 1.8$-$3.3 enhancement in the accretion rate. The initial burst occurred over a few months, with a sharp rise and then shallower decay. A second rise occurred soon after the decay, and the source is still bright one year later. The mid-IR emission, the small-scale CO outflow mapped with ALMA, and the location of variable maser emission indicate that the variability is associated with the SW component. The near-infrared and NEOWISE $W1$ and $W2$ emission is located along the blueshifted CO outflow, spatially offset by $\sim3$ to $4^{\prime\prime}$ from the SW component. The $K$-band emission imaged by UKIRT shows a compact H$_2$ emission source at the edge of the outflow, with a tail tracing the outflow back to the source. The $W1$ emission, likely dominated by scattered light, brightens by 0.7 mag, consistent with expectations based on the sub-mm lightcurve. The signal of continuum variability in $K$-band and $W2$ is masked by stable H$_2$ emission, as seen in our Gemini/GNIRS spectrum, and perhaps by CO emission. These differences in emission sources complicate infrared searches for variability of the youngest protostars. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Comments: 29 pages, 14 figures, accepted for publication in ApJ

Complete 3D MHD simulations of the current quench phase of ITER mitigated disruptions

Authors: F. J. Artola, A. Loarte, M. Hoelzl, M. Lehnen, N. Schwarz, the JOREK team

Abstract: Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN… ▽ More Complete 3D simulations of the current quench phase of ITER disruptions are key to predict asymmetric forces acting into the ITER wall. We present for the first time such simulations for ITER mitigated disruptions at realistic Lundquist numbers. For these strongly mitigated disruptions, we find that the edge safety factor remains above 2 and the maximal integral horizontal forces remain below 1 MN. The maximal integral vertical force is found to be 13 MN and arises in a time scale given by the resistive wall time as expected from theoretical considerations. In this respect, the vertical force arises after the plasma current has completely decayed, showing the importance of continuing the simulations also in the absence of plasma current. We conclude that the horizontal wall force rotation is not a concern for these strongly mitigated disruptions in ITER, since when the wall forces form, there are no remaining sources of rotation. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Comments: to be submitted to Nuclear Fusion

Journal ref: Nuclear Fusion 2021

MHD simulations of small ELMs at low triangularity in ASDEX Upgrade

Authors: A. Cathey, M. Hoelzl, G. Harrer, M. G. Dunne, G. T. A. Huijsmans, K. Lackner, S. J. P. Pamela, E. Wolfrum, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualita… ▽ More The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualitatively similar to the so-called quasi-continuous exhaust (QCE) regime in several ways. Repetitive type-I ELMs are substituted by roughly constant levels of outwards transport caused by peeling-ballooning modes (with dominant ballooning characteristics) which are localised in the last 5\% of the confined region (in normalised poloidal flux). The simulated low triangularity plasma transitions to a type-I ELMy H-mode if the separatrix density is sufficiently reduced or if the input heating power is sufficiently increased. The stabilising factors that play a role in the suppression of the small ELMs are also investigated by analysing the simulations, and the importance of including diamagnetic effects in the simulations is highlighted. By considering a scan in the pedestal resistivity and by measuring the poloidal velocity of the modes (and comparing to theoretical estimates for ideal and resistive modes), we identify the underlying instabilities as resistive peeling-ballooning modes. Decreasing the resistivity below experimentally-relevant conditions (i.e., going towards ideal MHD), the peeling-ballooning modes that constrain the pedestal below the type-I ELM stability boundary display sharply decreasing growth rates. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Authors: A. Cathey, M. Hoelzl, S. Futatani, P. T. Lang, K. Lackner, G. T. A. Huijsmans, S. J. P. Pamela, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-tri… ▽ More Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-triggered ELMs are simulated by injecting deuterium pellets into different time points during the pedestal build-up described in [A. Cathey et al. Nuclear Fusion 60, 124007 (2020)]. Realistic ExB and diamagnetic background plasma flows as well as the time dependent bootstrap current evolution are included during the build-up to capture the balance between stabilising and destabilising terms for the edge instabilities accurately. Dependencies on the pellet size and injection times are studied. The spatio-temporal structures of the modes and the resulting divertor heat fluxes are compared in detail between spontaneous and triggered ELMs. We observe that the premature excitation of ELMs by means of pellet injection is caused by a helical perturbation described by a toroidal mode number of n = 1. In accordance with experimental observations, the pellet-triggered ELMs show reduced thermal energy losses and narrower divertor wetted area with respect to spontaneous ELMs. The peak divertor energy fluency is seen to decrease when ELMs are triggered by pellets injected earlier during the pedestal build-up. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Young Faithful: The Eruptions of EC 53 as It Cycles through Filling and Draining the Inner Disk

Authors: Yong-Hee Lee, Doug Johnstone, Jeong-Eun Lee, Gregory Herczeg, Steve Mairs, Watson Varricatt, Klaus W. Hodapp, Tim Naylor, Carlos Contreras Peña, Giseon Baek, Martin Haas, Rolf Chini, The JCMT Transient Team

Abstract: While young stellar objects sometimes undergo bursts of accretion, these bursts usually occur sporadically, making them challenging to study observationally and to explain theoretically. We build a schematic description of cyclical bursts of the young stellar object EC 53 using near-IR and sub-mm monitoring obtained over six cycles, each lasting $\approx530$ days. EC 53 brightens over $0.12$ yr by… ▽ More While young stellar objects sometimes undergo bursts of accretion, these bursts usually occur sporadically, making them challenging to study observationally and to explain theoretically. We build a schematic description of cyclical bursts of the young stellar object EC 53 using near-IR and sub-mm monitoring obtained over six cycles, each lasting $\approx530$ days. EC 53 brightens over $0.12$ yr by $0.3$ mag at 850 $μ$m, $2$ mag at 3.35 $μ$m, and $1.5$ mag at near-IR wavelengths, to a maximum luminosity consistent with an accretion rate of $\sim8\times10^{-6}$ M$_\odot$ yr$^{-1}$. The emission then decays with an e-folding timescale of $\approx0.74$ yr until the accretion rate is $\sim1\times10^{-6}$ M$_\odot$ yr$^{-1}$. The next eruption then occurs, likely triggered by the buildup of $\sim5\times10^{-6}$ M$_\odot$ of mass in the inner disk, enough that it becomes unstable and drains onto the star. Just before outburst, when the disk is almost replenished, the near-IR colors become redder, indicating an increase in the geometrical height of the disk by this mass buildup. The reddening disappears soon after the initial burst, as much of the mass is drained from the disk. We quantify physical parameters related to the accretion process in EC 53 by assuming an $α$-disk formulation, constrained by the observed disk properties and accretion rate. While we can only speculate about the possible trigger for these faithful eruptions, we hope that our quantified schematic will motivate theorists to test the hypothesized mechanisms that could cause the cyclical buildup and draining of mass in the inner disk. △ Less

Submitted 17 September, 2020; v1 submitted 11 September, 2020; originally announced September 2020.

Comments: Accepted for publication in the Astrophysical Journal

Non-linear extended MHD simulations of type-I edge localised mode cycles in ASDEX Upgrade and their underlying triggering mechanism

Authors: Andres Cathey, M. Hoelzl, K. Lackner, G. T. A. Huijsmans, M. G. Dunne, E. Wolfrum, S. J. P. Pamela, F. Orain, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear inter… ▽ More A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear interactions between the axisymmetric background plasma and growing non-axisymmetric perturbations. The separation of timescales prompts the explosive, i.e. faster than exponential, growth of an ELM crash which lasts ${\sim}$ 500 $μ$s. The duration and size of the simulated ELM crashes compare qualitatively well with type-I ELMs in ASDEX Upgrade. As expected for type-I ELMs, a direct proportionality between the heating power in the simulations and the ELM repetition frequency is obtained. The simulations presented here are a major step forward towards predictive modelling of ELMs and of the assessment of mitigation techniques in ITER and other future tokamaks. △ Less

Submitted 26 October, 2020; v1 submitted 20 July, 2020; originally announced July 2020.

The Relationship between Mid-Infrared and Sub-Millimetre Variability of Deeply Embedded Protostars

Authors: Carlos Contreras Peña, Doug Johnstone, Giseon Baek, Gregory J. Herczeg, Steve Mairs, Aleks Scholz, Jeong-Eun Lee, The JCMT Transient Team

Abstract: We study the relationship between the mid-infrared and sub-mm variability of deeply embedded protostars using the multi-epoch data from the Wide Infrared Survey Explorer ($WISE$/NEOWISE) and the ongoing James Clerk Maxwell Telescope (JCMT) transient survey. Our search for signs of stochastic (random) and/or secular (roughly monotonic in time) variability in a sample of 59 young stellar objects (YS… ▽ More We study the relationship between the mid-infrared and sub-mm variability of deeply embedded protostars using the multi-epoch data from the Wide Infrared Survey Explorer ($WISE$/NEOWISE) and the ongoing James Clerk Maxwell Telescope (JCMT) transient survey. Our search for signs of stochastic (random) and/or secular (roughly monotonic in time) variability in a sample of 59 young stellar objects (YSOs) revealed that 35 are variable in at least one of the two surveys. This variability is dominated by secular changes. Of those objects with secular variability, 14 objects ($22\%$ of the sample) show correlated secular variability over mid-IR and sub-mm wavelengths. Variable accretion is the likely mechanism responsible for this type of variability. Fluxes of YSOs that vary in both wavelengths follow a relation of $\log_{10} F_{4.6}(t)=η\log_{10} F_{850}(t)$ between the mid-IR and sub-mm, with $η=5.53\pm0.29$. This relationship arises from the fact that sub-mm fluxes respond to the dust temperature in the larger envelope whereas the mid-IR emissivity is more directly proportional to the accretion luminosity. The exact scaling relation, however, depends on the structure of the envelope, the importance of viscous heating in the disc, and dust opacity laws. △ Less

Submitted 4 May, 2020; originally announced May 2020.

Comments: 22 pages, 6 figures, accepted for publication in MNRAS

The JCMT Transient Survey: Identifying Submillimetre Continuum Variability over Several Year Timescales Using Archival JCMT Gould Belt Survey Observations

Authors: Steve Mairs, Doug Johnstone, Helen Kirk, James Lane, Graham S. Bell, Sarah Graves, Gregory J. Herczeg, Peter Scicluna, Geoffrey C. Bower, Huei-Ru Vivien Chen, Jennifer Hatchell, Yuri Aikawa, Wen-** Chen, Miju Kang, Sung-Ju Kang, Jeong-Eun Lee, Oscar Morata, Andy Pon, Aleks Scholz, Satoko Takahashi, Hyunju Yoo, the JCMT Transient Team

Abstract: Investigating variability at the earliest stages of low-mass star formation is fundamental in understanding how a protostar assembles mass. While many simulations of protostellar disks predict non-steady accretion onto protostars, deeper investigation requires robust observational constraints on the frequency and amplitude of variability events characterised across the observable SED. In this stud… ▽ More Investigating variability at the earliest stages of low-mass star formation is fundamental in understanding how a protostar assembles mass. While many simulations of protostellar disks predict non-steady accretion onto protostars, deeper investigation requires robust observational constraints on the frequency and amplitude of variability events characterised across the observable SED. In this study, we develop methods to robustly analyse repeated observations of an area of the sky for submillimetre variability in order to determine constraints on the magnitude and frequency of deeply embedded protostars. We compare \mbox{850 $μ$m} JCMT Transient Survey data with archival JCMT Gould Belt Survey data to investigate variability over 2-4 year timescales. Out of 175 bright, independent emission sources identified in the overlap** fields, we find 7 variable candidates, 5 of which we classify as \textit{Strong} and the remaining 2 as \textit{Extended} to indicate the latter are associated with larger-scale structure. For the \textit{Strong} variable candidates, we find an average fractional peak brightness change per year of |4.0|\% yr$^{-1}$ with a standard deviation of $2.7\%\mathrm{\:yr}^{-1}$. In total, 7\% of the protostars associated with \mbox{850 $μ$m} emission in our sample show signs of variability. Four of the five \textit{Strong} sources are associated with a known protostar. The remaining source is a good follow-up target for an object that is anticipated to contain an enshrouded, deeply embedded protostar. In addition, we estimate the \mbox{850 $μ$m} periodicity of the submillimetre variable source, EC 53, to be \mbox{567 $\pm$ 32 days} based on the archival Gould Belt Survey data. △ Less

Submitted 10 October, 2017; originally announced October 2017.

Comments: 33 Pages, 19 figures, Accepted in ApJ

The JCMT Transient Survey: Detection of sub-mm variability in a Class I protostar EC 53 in Serpens Main

Authors: Hyunju Yoo, Jeong-Eun Lee, Steve Mairs, Doug Johnstone, Gregory J. Herczeg, Sung-ju Kang, Miju Kang, Jungyeon Cho, The JCMT Transient Team

Abstract: During the protostellar phase of stellar evolution, accretion onto the star is expected to be variable, but this suspected variability has been difficult to detect because protostars are deeply embedded. In this paper, we describe a sub-mm luminosity burst of the Class I protostar EC 53 in Serpens Main, the first variable found during our dedicated JCMT/SCUBA-2 monitoring program of eight nearby s… ▽ More During the protostellar phase of stellar evolution, accretion onto the star is expected to be variable, but this suspected variability has been difficult to detect because protostars are deeply embedded. In this paper, we describe a sub-mm luminosity burst of the Class I protostar EC 53 in Serpens Main, the first variable found during our dedicated JCMT/SCUBA-2 monitoring program of eight nearby star-forming regions. EC 53 remained quiescent for the first 6 months of our survey, from February to August 2016. The sub-mm emission began to brighten in September 2016, reached a peak brightness of $1.5$ times the faint state, and has been decaying slowly since February 2017. The change in sub-mm brightness is interpreted as dust heating in the envelope, generated by a luminosity increase of the protostar of a factor of $\ge 4$. The 850~$μ$m lightcurve resembles the historical $K$-band lightcurve, which varies by a factor of $\sim 6$ with a 543 period and is interpreted as accretion variability excited by interactions between the accretion disk and a close binary system. The predictable detections of accretion variability observed at both near-infrared and sub-mm wavelengths make the system a unique test-bed, enabling us to capture the moment of the accretion burst and to study the consequences of the outburst on the protostellar disk and envelope. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Comments: Accepted for publication in ApJ

The JCMT Transient Survey: Data Reduction and Calibration Methods

Authors: Steve Mairs, James Lane, Doug Johnstone, Helen Kirk, Kevin Lacaille, Geoffrey C. Bower, Graham S. Bell, Sarah Graves, Scott Chapman, The JCMT Transient Survey Team

Abstract: Though there has been a significant amount of work investigating the early stages of low-mass star formation in recent years, the evolution of the mass assembly rate onto the central protostar remains largely unconstrained. Examining in depth the variation in this rate is critical to understanding the physics of star formation. Instabilities in the outer and inner circumstellar disk can lead to ep… ▽ More Though there has been a significant amount of work investigating the early stages of low-mass star formation in recent years, the evolution of the mass assembly rate onto the central protostar remains largely unconstrained. Examining in depth the variation in this rate is critical to understanding the physics of star formation. Instabilities in the outer and inner circumstellar disk can lead to episodic outbursts. Observing these brightness variations at infrared or submillimetre wavelengths sets constraints on the current accretion models. The JCMT Transient Survey is a three-year project dedicated to studying the continuum variability of deeply embedded protostars in eight nearby star-forming regions at a one month cadence. We use the SCUBA-2 instrument to simultaneously observe these regions at wavelengths of 450 $μ$m and 850 $μ$m. In this paper, we present the data reduction techniques, image alignment procedures, and relative flux calibration methods for 850 $μ$m data. We compare the properties and locations of bright, compact emission sources fitted with Gaussians over time. Doing so, we achieve a spatial alignment of better than 1" between the repeated observations and an uncertainty of 2-3\% in the relative peak brightness of significant, localised emission. This combination of imaging performance is unprecedented in ground-based, single dish submillimetre observations. Finally, we identify a few sources that show possible and confirmed brightness variations. These sources will be closely monitored and presented in further detail in additional studies throughout the duration of the survey. △ Less

Submitted 27 July, 2017; v1 submitted 6 June, 2017; originally announced June 2017.

Comments: 24 pages, 15 figures, 2 Tables, Accepted in ApJ

The JCMT Gould Belt Survey: A Quantitative Comparison Between SCUBA-2 Data Reduction Methods

Authors: S. Mairs, D. Johnstone, H. Kirk, S. Graves, J. Buckle, S. F. Beaulieu, D. S. Berry, H. Broekhoven-Fiene, M. J. Currie, M. Fich, J. Hatchell, T. Jenness, J. C. Mottram, D. Nutter, K. Pattle, J. E. Pineda, C. Salji, J. Di Francesco, M. R. Hogerheijde, D. Ward-Thompson, the JCMT Gould Belt survey team

Abstract: Performing ground-based submillimetre observations is a difficult task as the measurements are subject to absorption and emission from water vapour in the Earth's atmosphere and time variation in weather and instrument stability. Removing these features and other artifacts from the data is a vital process which affects the characteristics of the recovered astronomical structure we seek to study. I… ▽ More Performing ground-based submillimetre observations is a difficult task as the measurements are subject to absorption and emission from water vapour in the Earth's atmosphere and time variation in weather and instrument stability. Removing these features and other artifacts from the data is a vital process which affects the characteristics of the recovered astronomical structure we seek to study. In this paper, we explore two data reduction methods for data taken with the Submillimetre Common-User Bolometer Array-2 (SCUBA-2) at the James Clerk Maxwell Telescope (JCMT). The JCMT Legacy Reduction 1 (JCMT LR1) and The Gould Belt Legacy Survey Legacy Release 1 (GBS LR1) reduction both use the same software, Starlink, but differ in their choice of data reduction parameters. We find that the JCMT LR1 reduction is suitable for determining whether or not compact emission is present in a given region and the GBS LR1 reduction is tuned in a robust way to uncover more extended emission, which better serves more in-depth physical analyses of star-forming regions. Using the GBS LR1 method, we find that compact sources are recovered well, even at a peak brightness of only 3 times the noise, whereas the reconstruction of larger objects requires much care when drawing boundaries around the expected astronomical signal in the data reduction process. Incorrect boundaries can lead to false structure identification or it can cause structure to be missed. In the JCMT LR1 reduction, the extent of the true structure of objects larger than a point source is never fully recovered. △ Less

Submitted 21 September, 2015; originally announced September 2015.

Comments: 26 Pages, 16 Figures, Accepted for publication in Monthly Notices of the Royal Astronomical Society (MNRAS)