Showing 1–50 of 50 results for author: Team, t E

First demonstration of Super-X divertor exhaust control for transient heat load management in compact fusion reactors

Authors: B. Kool, K. Verhaegh, G. L. Derks, T. A. Wijkamp, N. Lonigro, R. Doyle, G. McArdle, C. Vincent, J. Lovell, F. Federici, S. S. Henderson, R. T. Osawa, D. Brida, H. Reimerdes, M. van Berkel, The EUROfusion tokamak exploitation team, the MAST-U team

Abstract: Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this… ▽ More Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this work, we demonstrate exhaust control in ADCs for the first time, on MAST-U. We employ a novel diagnostic strategy for the neutral gas buffer which shields the target. Our work shows that ADCs tackle key risks and uncertainties in realising fusion energy: 1) an enlarged operating window which 2) improves exhaust control through the absorption of transients which can remove the neutral shield and damage the divertor, 3) isolation of each divertor from other reactor regions, enabling combined control. This showcases real-world benefits of alternative divertors for effective heat load management and control in reactors. △ Less

Submitted 10 July, 2024; originally announced July 2024.

3D MHD modelling of plasmoid drift following massive material injection in a tokamak

Authors: M. Kong, E. Nardon, D. Bonfiglio, M. Hoelzl, D. Hu, the JOREK team, the EUROfusion Tokamak Exploitation Team

Abstract: Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both e… ▽ More Mechanisms of plasmoid drift in the presence of massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited on the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theory. The simulations confirm the important role of the propagation of shear Alfvén waves (SAWs) from both ends of the plasmoid ("SAW braking") and the development of external resistive currents along magnetic field lines ("Pégourié braking") in limiting charge separation and thus the $\mathbf{E}\times \mathbf{B}$ plasmoid drift, where $\mathbf{E}$ and $\mathbf{B}$ are the electric and magnetic fields, respectively. The drift velocity is found to be limited by the SAW braking for cases with relatively small source amplitude while the Pégourié braking is shown to be stronger with larger toroidal extent of the source, both in good agreement with existing theory. The simulations also identity the key role of the size of the $\mathbf{E}\times \mathbf{B}$ flow region on plasmoid drift and show that the saturated velocity caused by dominant SAW braking agrees well with theory when considering an effective pressure within the $\mathbf{E}\times \mathbf{B}$ flow region. The existence of SAWs in the simulations is demonstrated and the 3D picture of plasmoid drift is also discussed. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Comments: To be submitted to Nuclear Fusion

Measurement of zero-frequency fluctuations generated by coupling between Alfvén modes in the JET tokamak

Authors: Juan Ruiz Ruiz, Jeronimo Garcia, Michael Barnes, Mykola Dreval, Carine Giroud, Valerian H. Hall-Chen, Michael R. Hardman, Jon C. Hillesheim, Yevgen Kazakov, Samuele Mazzi, Felix I. Parra, Bhavin S. Patel, Alexander A. Schekochihin, Ziga Stancar, the JET Contributors, the EUROfusion Tokamak Exploitation Team

Abstract: We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with th… ▽ More We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, and confinement factor $H_{89,P}$. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Correlation of the L-mode density limit with edge collisionality

Authors: Andrew Maris, Cristina Rea, Alessandro Pau, Wenhui Hu, Bingjia Xiao, Robert Granetz, Earl Marmar, the EUROfusion Tokamak Exploitation team, the Alcator C-Mod team, the ASDEX Upgrade team, the DIII-D team, the EAST team, the TCV team

Abstract: The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwa… ▽ More The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwald scaling - in its remarkable simplicity - may not capture the full complexity of the disruptive density limit. In this study, we assemble a multi-machine database to quantify the effectiveness of the Greenwald limit as a predictor of the L-mode density limit and identify alternative stability metrics. We find that a two-parameter dimensionless boundary in the plasma edge, $ν_{*\rm, edge}^{\rm limit} = 3.0 β_{T,{\rm edge}}^{-0.4}$, achieves significantly higher accuracy (true negative rate of 97.7% at a true positive rate of 95%) than the Greenwald limit (true negative rate 86.1% at a true positive rate of 95%) across a multi-machine dataset including metal- and carbon-wall tokamaks (AUG, C-Mod, DIII-D, and TCV). The collisionality boundary presented here can be applied for density limit avoidance in current devices and in ITER, where it can be measured and responded to in real time. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 27 pages, 9 figures

First 2D electron density measurements using Coherence Imaging Spectroscopy in the MAST-U Super-X divertor

Authors: N. Lonigro, R. Doyle, J. S. Allcock, B. Lipschultz, K. Verhaegh, C. Bowman, D. Brida, J. Harrison, O. Myatra, S. Silburn, C. Theiler, T. A. Wijkamp, MAST-U Team, the EUROfusion Tokamak Exploitation Team

Abstract: 2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric dela… ▽ More 2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric delays simultaneously. The model has been applied to images generated from simulated density profiles to evaluate its performance. Typical mean absolute errors of 30 percent are achieved, which are consistent with Monte Carlo uncertainty propagation accounting for noise, uncertainties in the calibrations, and in the model inputs. The analysis has been tested on experimental data from the MAST-U Super-X divertor, where it infers typical electron densities of 2-3 $10^{19}$ m$^{-3}$ and neutral temperatures of 0-2 eV during beam-heated L-mode discharges. The results are shown to be in reasonable agreement with the other available diagnostics. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Expulsion of runaway electrons using ECRH in the TCV tokamak

Authors: J. Decker, M. Hoppe, U. Sheikh, B. P. Duval, G. Papp, L. Simons, T. Wijkamp, J. Cazabonne, S. Coda, E. Devlaminck, O. Ficker, R. Hellinga, U. Kumar, Y. Savoye-Peysson, L. Porte, C. Reux, C. Sommariva, A. Tema Biwolé, B. Vincent, L. Votta, the TCV Team, the EUROfusion Tokamak Exploitation Team

Abstract: Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron reso… ▽ More Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron resonance heating (ECRH) in the Tokamak à Configuration Variable (TCV) reduces an existing RE seed population by up to three orders of magnitude within only a few hundred milliseconds. Applying ECRH can also prevent the formation of a post-disruption RE beam where it would otherwise be expected. The RE expulsion rate and consequent RE current reduction are found to increase with applied ECRH power. Whereas central ECRH is effective in expelling REs, off-axis ECRH has a comparatively limited effect. A simple 0-D model for the evolution of the RE population is presented that explains the effective ECRH-induced RE expulsion results from the combined effects of increased electron temperature and enhanced RE transport. △ Less

Submitted 15 April, 2024; originally announced April 2024.

Characteristics of the Alfvénic activity during the current quench in ASDEX Upgrade

Authors: P. Heinrich, G. Papp, Ph. Lauber, G. Pautasso, M. Dunne, M. Maraschek, V. Igochine, O. Linder, the ASDEX Upgrade Team, the EUROfusion Tokamak Exploitation Team

Abstract: ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global… ▽ More ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global Alfvén eigenmodes using linear gyrokinetic MHD simulations. Changes in the Alfvén continuum during the quench are proposed as explanation for the strong frequency sweep observed. A systematic statistical analysis shows no significant connection of the mode characteristics to the dynamics of the subsequent runaway electron beams. In our studies, the appearance and amplitude of the modes does not seem to affect the potential subsequent runaway beam. Beyond the scope of the 180 investigated dedicated RE experiments, the Alfvénic activity is also observed in natural disruptions with no RE beam forming. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Comments: 15 (+5 Appendix) pages, 15 (+1 Appendix) figures, submitted paper, Additional details on each classification/method openly available in my master's thesis, see http://hdl.handle.net/21.11116/0000-0008-ED5A-9

Comparison of detachment in Ohmic plasmas with positive and negative triangularity

Authors: O. Février, C. K. Tsui, G. Durr-Legoupil-Nicoud, C. Theiler, M. Carpita, S. Coda, C. Colandrea, B. P. Duval, S. Gorno, E. Huett, B. Linehan, A. Perek, L. Porte, H. Reimerdes, O. Sauter, E. Tonello, M. Zurita, T. Bolzonella, F. Sciortino, the TCV Team, the EUROfusion Tokamak Exploitation Team

Abstract: In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lower, and average triangularity (the mean of upper and lower triangularity: $δ$) in the TCV tokamak. It is universally found that detachment is mor… ▽ More In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lower, and average triangularity (the mean of upper and lower triangularity: $δ$) in the TCV tokamak. It is universally found that detachment is more difficult to access for NT sha**. The outer divertor leg of discharges with $δ\approx -0.3$ could not be cooled to below $5~\mathrm{eV}$ through core density ramps alone. The behavior of the upstream plasma and geometrical divertor effects (e.g. a reduced connection length with negative lower triangularity) do not fully explain the challenges in detaching NT plasmas. Langmuir probe measurements of the target heat flux widths ($λ_q$) were constant to within 30% across an upper triangularity scan, while the spreading factor $S$ was lower by up to 50% for NT, indicating a generally lower integral Scrape-Off Layer width, $λ_{int}$. The line-averaged core density was typically higher for NT discharges for a given fuelling rate, possibly linked to higher particle confinement in NT. Conversely, the divertor neutral pressure and integrated particle fluxes to the targets were typically lower for the same line-averaged density, indicating that NT configurations may be closer to the sheath-limited regime than their PT counterparts, which may explain why NT is more challenging to detach. △ Less

Submitted 23 January, 2024; v1 submitted 18 October, 2023; originally announced October 2023.

Intermittency of density fluctuations and zonal-flow generation in MAST edge plasmas

Authors: A. Sladkomedova, I. Cziegler, A. R. Field, A. A. Schekochihin, D. Dunai, P. G. Ivanov, the MAST-U Team, the EUROfusion MST1 Team

Abstract: The properties of the edge ion-scale turbulence are studied using the beam emission spectroscopy (BES) diagnostic on MAST. Evidence of the formation of large-scale high-amplitude coherent structures, filamentary density blobs and holes, 2$-$4 cm inside the plasma separatrix is presented. Measurements of radial velocity and skewness of the density fluctuations indicate that density holes propagate… ▽ More The properties of the edge ion-scale turbulence are studied using the beam emission spectroscopy (BES) diagnostic on MAST. Evidence of the formation of large-scale high-amplitude coherent structures, filamentary density blobs and holes, 2$-$4 cm inside the plasma separatrix is presented. Measurements of radial velocity and skewness of the density fluctuations indicate that density holes propagate radially inwards, with the skewness profile peaking at 7$-$10 cm inside the separatrix. Poloidal velocities of the density fluctuations measured using cross-correlation time delay estimation (CCTDE) are found to exhibit an intermittent behaviour. Zonal-flow analysis reveals the presence of poloidally symmetric coherent oscillations $-$ low-frequency (LF) zonal flows and geodesic acoustic modes (GAM). Shearing rates of the observed zonal flows are found to be comparable to the turbulence decorrelation rate. The observed bursts in density-fluctuation power are followed by quiescent periods with a transient increase in the power of sheared flows. Three-wave interactions between broadband turbulence and a GAM are illustrated using the autobispectral technique. It is shown that the zonal flows and the density-fluctuation field are nonlinearly coupled and LF zonal flows mediate the energy transfer from high- to low-frequency density fluctuations. △ Less

Submitted 21 December, 2023; v1 submitted 11 June, 2023; originally announced June 2023.

Probing non-linear MHD stability of the EDA H-mode in ASDEX Upgrade

Authors: A Cathey, M Hoelzl, L Gil, MG Dunne, GF Harrer, GTA Huijsmans, J Kalis, K Lackner, SJP Pamela, E Wolfrum, S Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non… ▽ More Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non-linear simulations with the visco-resistive extended MHD code, JOREK, sustain non-axisymmetric perturbations that are linearly most unstable with toroidal mode numbers of n = \{6 \dots 9\}, but non-linearly higher and lower n become driven and the low-n become dominant. The poloidal mode velocity during the linear phase is found to correspond to the expected velocity for resistive ballooning modes. The perturbations that exist in the simulations have somewhat smaller poloidal wavenumbers (k_θ \sim 0.1 to 0.5 cm^{-1} ) than the experimental expectations for the quasi-coherent mode in EDA, and cause non-negligible transport in both the heat and particle channels. In the transition from linear to non-linear phase, the mode frequency chirps down from approximately 35 kHz to 13 kHz, which corresponds approximately to the lower end of frequencies that are typically observed in EDA H-modes in ASDEX Upgrade. △ Less

Submitted 22 January, 2023; originally announced January 2023.

HD 23472: A multi-planetary system with three super-Earths and two potential super-Mercuries

Authors: S. C. C. Barros, O. D. S. Demangeon, Y. Alibert, A. Leleu, V. Adibekyan, C. Lovis, D. Bossini, S. G. Sousa, N. Hara, the ESPRESSO team

Abstract: We report the characterisation of a multi-planetary system composed of five exoplanets orbiting the K-dwarf HD~23472 (TOI-174). In addition to the two super-Earths that were previously confirmed, we confirm and characterise three Earth-size planets in the system using ESPRESSO radial velocity observations. The planets of this compact system have periods of $P_d \sim 3.98\,$, $P_e \sim 7.90\,$,… ▽ More We report the characterisation of a multi-planetary system composed of five exoplanets orbiting the K-dwarf HD~23472 (TOI-174). In addition to the two super-Earths that were previously confirmed, we confirm and characterise three Earth-size planets in the system using ESPRESSO radial velocity observations. The planets of this compact system have periods of $P_d \sim 3.98\,$, $P_e \sim 7.90\,$, $P_f \sim 12.16\,$, $P_b \sim 17.67,\,$ and $P_c \sim 29.80\,$days and radii of $R_d \sim 0.75\,$ , $R_e \sim 0.82,$, $R_f \sim 1.13\,$, $R_b \sim 2.01,\,$ and, $R_c \sim 1.85\,$ \REarth. Because of its small size, its proximity to planet d's transit, and close resonance with planet d, planet e was only recently found. The planetary masses were estimated to be $M_d =0.54\pm0.22$, $M_e =0.76\pm0.30$, $M_f =0.64_{-0.39}^{+0.46}$, $M_b = 8.42_{-0.84}^{+0.83}$, and $M_c = 3.37_{-0.87}^{+0.92}$ \MEarth. These planets are among the lightest planets, with masses measured using the radial velocity method, demonstrating the very high precision of the ESPRESSO spectrograph. We estimated the composition of the system's five planets and found that their gas and water mass fractions increase with stellar distance, suggesting that the system was shaped by irradiation. The high density of the two inner planets ($ρ_d = 7.5_{-3.1}^{+3.9}$ and $ρ_e = 7.5_{-3.0}^{+3.9}\, \mathrm{g.cm^{-3}}$) indicates that they are likely to be super-Mercuries. This is supported by the modelling of the internal structures of the planets, which also suggests that the three outermost planets have significant water or gas content If the existence of two super-Mercuries in the system is confirmed, this system will be the only one known to feature two super-Mercuries, making it an excellent testing bed for theories of super-Mercuries formation. (Abridged) △ Less

Submitted 27 September, 2022; originally announced September 2022.

Comments: 24 pages, 13 figures, Published in A&A

The European Solar Telescope

Authors: C. Quintero Noda, R. Schlichenmaier, L. R. Bellot Rubio, M. G. Löfdahl, E. Khomenko, J. Jurcak, J. Leenaarts, C. Kuckein, S. J. González Manrique, S. Gunar, C. J. Nelson, J. de la Cruz Rodríguez, K. Tziotziou, G. Tsiropoula, G. Aulanier, M. Collados, the EST team

Abstract: The European Solar Telescope (EST) is a project aimed at studying the magnetic connectivity of the solar atmosphere, from the deep photosphere to the upper chromosphere. Its design combines the knowledge and expertise gathered by the European solar physics community during the construction and operation of state-of-the-art solar telescopes operating in visible and near-infrared wavelengths: the Sw… ▽ More The European Solar Telescope (EST) is a project aimed at studying the magnetic connectivity of the solar atmosphere, from the deep photosphere to the upper chromosphere. Its design combines the knowledge and expertise gathered by the European solar physics community during the construction and operation of state-of-the-art solar telescopes operating in visible and near-infrared wavelengths: the Swedish 1m Solar Telescope (SST), the German Vacuum Tower Telescope (VTT) and GREGOR, the French Télescope Héliographique pour l'Étude du Magnétisme et des Instabilités Solaires (THÉMIS), and the Dutch Open Telescope (DOT). With its 4.2 m primary mirror and an open configuration, EST will become the most powerful European ground-based facility to study the Sun in the coming decades in the visible and near-infrared bands. EST uses the most innovative technological advances: the first adaptive secondary mirror ever used in a solar telescope, a complex multi-conjugate adaptive optics with deformable mirrors that form part of the optical design in a natural way, a polarimetrically compensated telescope design that eliminates the complex temporal variation and wavelength dependence of the telescope Mueller matrix, and an instrument suite containing several (etalon-based) tunable imaging spectropolarimeters and several integral field unit spectropolarimeters. This publication summarises some fundamental science questions that can be addressed with the telescope, together with a complete description of its major subsystems. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Comments: 38 pages, 24 figures

Journal ref: A&A 666, A21 (2022)

Experimental scaling of the scrape-off layer particle flux width by outboard divertor Langmuir probes with favorable Bt configuration on EAST

Authors: X. Liu, L. Y. Meng, J. C. Xu, L. Wang, J. Li, the EAST Team

Abstract: The scrape-off layer (SOL) power width (λ_q) is important for predicting the heat load on divertor targets for future magnetically confined devices. Currently, the underlying physics for λ_q scaling is not fully understood. This paper extends the previous inboard SOL particle flux width (λ_{js}) scaling [Liu et al 2019 Plasma Phys. Control. Fusion 61 045001] to the outboard side in EAST, which can… ▽ More The scrape-off layer (SOL) power width (λ_q) is important for predicting the heat load on divertor targets for future magnetically confined devices. Currently, the underlying physics for λ_q scaling is not fully understood. This paper extends the previous inboard SOL particle flux width (λ_{js}) scaling [Liu et al 2019 Plasma Phys. Control. Fusion 61 045001] to the outboard side in EAST, which can provide more experimental evidence for λ_q study. A systematic method has been developed to correct the less reliable upper outer (UO) divertor Langmuir probe (Div-LP) measurements with their more reliable neighboring measurements to reduce the measurement uncertainty of λ_js. For the discharges with the favorable Bt and upper single null configurations in the 2019 experiment campaign, about 260 discharges have been selected by certain criteria to ensure good λ_js measurements. Three H-mode, L-mode, and Ohmic databases have been constructed and are used for λ_js scalings. It is found that the outboard λ_js for the H-mode and L-mode plasmas scales as, λ_(js,UO)=1.52(W_{MHD}/n_e)^(-0.61) P_{tot}^0.19, where W_{MHD} is the stored energy, n_e is the line-averaged density, and P_{tot} is the total input power. This scaling is similar to the inboard λ_js scaling except for the scaling amplitude that is probably due the triangularity. The repeatable scaling dependence on W_{MHD}/n_e confirms the reliability of this dependence even though the regression quality is relatively poor. It is also discussed that the solely scaling of λ_q/λ_{js} on Bp is not enough to include all the physics of SOL heat transports. △ Less

Submitted 16 February, 2023; v1 submitted 17 June, 2022; originally announced June 2022.

Comments: 14 pages, 7 figures, 4 tables, Nucl. Fusion (2023)

Global gyrokinetic simulations of ASDEX Upgrade up to the transport time-scale with GENE-Tango

Authors: A. Di Siena, A. Banon Navarro, T. Luda, G. Merlo, M. Bergmann, L. Leppin, T. Goerler, J. B. Parker, L. LoDestro, J. Hittinger, B. Dorland, G. Hammett, F. Jenko, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: An accurate description of turbulence up to the transport time scale is essential for predicting core plasma profiles and enabling reliable calculations for designing advanced scenarios and future devices. Here, we exploit the gap separation between turbulence and transport time scales and couple the global gyrokinetic code GENE to the transport-solver Tango, including kinetic electrons, collision… ▽ More An accurate description of turbulence up to the transport time scale is essential for predicting core plasma profiles and enabling reliable calculations for designing advanced scenarios and future devices. Here, we exploit the gap separation between turbulence and transport time scales and couple the global gyrokinetic code GENE to the transport-solver Tango, including kinetic electrons, collisions, realistic geometries, toroidal rotation and electromagnetic effects for the first time. This approach overcomes gyrokinetic codes' limitations and enables high-fidelity profile calculations in experimentally relevant plasma conditions, significantly reducing the computational cost. We present numerical results of GENE-Tango for two ASDEX Upgrade discharges, one of which exhibits a pronounced peaking of the ion temperature profile not reproduced by TGLF-ASTRA. We show that GENE-Tango can correctly capture the ion temperature peaking observed in the experiment. By retaining different physical effects in the GENE simulations, e.g., collisions, toroidal rotation and electromagnetic effects, we demonstrate that the ion temperature profile's peaking is due to electromagnetic effects of submarginal MHD instability. Based on these results, the expected GENE-Tango speedup for the ITER standard scenario is larger than two orders of magnitude compared to a single gyrokinetic simulation up to the transport time scale, possibly making first-principles ITER simulations feasible on current computing resources. △ Less

Submitted 12 April, 2022; originally announced April 2022.

A quasi-continuous exhaust scenario for a fusion reactor: the renaissance of small edge localized modes

Authors: G. F. Harrer, M. Faitsch, L. Radovanovic, E. Wolfrum, C. Albert, A. Cathey, M. Cavedon, M. Dunne, T. Eich, R. Fischer, M. Hoelzl, B. Labit, H. Meyer, F. Aumayr, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Tokamak operational regimes with small edge localized modes (ELMs) could be a solution to the problem of large transient heat loads in future fusion reactors because they provide quasi-continuous exhaust while kee** a good plasma confinement. A ballooning mode mechanism near the last closed flux surface (LCFS) governed by an interplay of the pressure gradient and the magnetic shear there has bee… ▽ More Tokamak operational regimes with small edge localized modes (ELMs) could be a solution to the problem of large transient heat loads in future fusion reactors because they provide quasi-continuous exhaust while kee** a good plasma confinement. A ballooning mode mechanism near the last closed flux surface (LCFS) governed by an interplay of the pressure gradient and the magnetic shear there has been proposed for small ELMs in high density ASDEX Upgrade and TCV discharges. In this manuscript we explore different factors relevant for plasma edge stability in a wide range of edge safety factors by changing the connection length between the good and the bad curvature side. Simultaneously this influences the stabilizing effect of the local magnetic shear close to the LCFS as well as the $E \times B$ flow shear. Ideal ballooning stability calculations with the HELENA code reveal that small ELM plasmas are indeed unstable against ballooning modes very close to the LCFS but can exhibit second ballooning stability in the steep gradient region which correlates with enhanced confinement. We also present first non-linear simulations of small ELM regimes with the JOREK code including the $E \times B$ shear which indeed develop ballooning like fluctuations in the high triangularity limit. In the region where the small ELMs originate the dimensionless parameters are very similar in our investigated discharges and in a reactor, making this regime the ideal exhaust scenario for a future reactor. △ Less

Submitted 25 October, 2021; originally announced October 2021.

MHD simulations of small ELMs at low triangularity in ASDEX Upgrade

Authors: A. Cathey, M. Hoelzl, G. Harrer, M. G. Dunne, G. T. A. Huijsmans, K. Lackner, S. J. P. Pamela, E. Wolfrum, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualita… ▽ More The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualitatively similar to the so-called quasi-continuous exhaust (QCE) regime in several ways. Repetitive type-I ELMs are substituted by roughly constant levels of outwards transport caused by peeling-ballooning modes (with dominant ballooning characteristics) which are localised in the last 5\% of the confined region (in normalised poloidal flux). The simulated low triangularity plasma transitions to a type-I ELMy H-mode if the separatrix density is sufficiently reduced or if the input heating power is sufficiently increased. The stabilising factors that play a role in the suppression of the small ELMs are also investigated by analysing the simulations, and the importance of including diamagnetic effects in the simulations is highlighted. By considering a scan in the pedestal resistivity and by measuring the poloidal velocity of the modes (and comparing to theoretical estimates for ideal and resistive modes), we identify the underlying instabilities as resistive peeling-ballooning modes. Decreasing the resistivity below experimentally-relevant conditions (i.e., going towards ideal MHD), the peeling-ballooning modes that constrain the pedestal below the type-I ELM stability boundary display sharply decreasing growth rates. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Investigation of the effectiveness of non-inductive `multi-harmonic' electron cyclotron current drive through modeling multi-pass absorptions in the EXL-50 spherical tokamak

Authors: D. Banerjee, S. D. Song, H. S. Xie, B. Liu, M. Y. Wang, W. J. Liu, B. Chen, L. Han, D. Luo, Y. Y. Song, Yu. V. Petrov, X. M. Song, M. S. Liu, R. W. Harvey, Y. J. Shi, Y. K. M. Peng, the EXL50 team

Abstract: The effectiveness of multiple electron cyclotron resonance (ECR) harmonics has been thoroughly investigated in context of high current drive efficiency, generally observed in fully non-inductive operation of the low aspect ratio EXL-50 spherical tokamak (ST) powered by electron cyclotron (EC) waves. The Fokker-Plank equation is numerically solved to obtain electron distribution function, under ste… ▽ More The effectiveness of multiple electron cyclotron resonance (ECR) harmonics has been thoroughly investigated in context of high current drive efficiency, generally observed in fully non-inductive operation of the low aspect ratio EXL-50 spherical tokamak (ST) powered by electron cyclotron (EC) waves. The Fokker-Plank equation is numerically solved to obtain electron distribution function, under steady state of the relativistic nonlinear Coulomb collision and quasi-linear diffusion operators, for calculating plasma current driven by the injected EC wave. For the extra-ordinary EC wave, simulation results unfold a mechanism by which electrons moving around the cold second harmonic ECR layer strongly resonate with higher harmonics via the relativistic Doppler shifted resonance condition. This feature is in fact evident above a certain value of input EC wave power in simulation, indicating it to be a non-linear phenomenon. Similar to the experimental observation, high efficiency in current drive (over 1 A/W) has indeed been found in simulation for a typical low density ($\sim 1\times10^{18}~m^{-3}$), low temperature ($\lesssim 100$ eV) plasma of EXL-50 by taking into account multi-pass absorptions in our simulation model. However, such characteristic is not found in the ordinary EC-wave study for both single-pass and multi-pass simulations, suggesting it as inefficient in driving current on our ST device. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: 22 pages, 15 figures. Submitted to the Nuclear Fusion journal

I-mode pedestal relaxation events in the Alcator C-Mod and ASDEX Upgrade tokamaks

Authors: D. Silvagni, J. L. Terry, W. McCarthy, A. E. Hubbard, T. Eich, M. Faitsch, L. Gil, T. Golfinopoulos, G. Grenfell, M. Griener, T. Happel, J. W. Hughes, U. Stroth, E. Viezzer, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mod… ▽ More In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mode discharges, mainly when the plasma is close to the H-mode transition. Also, the nature of the triggering instability is discussed by comparing measurements close to the separatrix in both devices. The PRE relative energy loss from the confined region increases with decreasing pedestal top collisionality $ν_{\mathrm{ped}}^*$. In addition, the relative electron temperature drop at the pedestal top, which is related to the conductive energy loss, rises with decreasing $ν_{\mathrm{ped}}^*$. Finally, the peak parallel energy fluence due to the PRE measured on the divertor in both devices is compared to the model introduced in [1] for type-I ELMs. The model is shown to provide an upper boundary for PRE energy fluence data, while a lower boundary is found by dividing the model by three. These two boundaries are used to make projections to future devices such as DEMO and ARC. △ Less

Submitted 6 September, 2021; originally announced September 2021.

Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations

Authors: A. Cathey, M. Hoelzl, S. Futatani, P. T. Lang, K. Lackner, G. T. A. Huijsmans, S. J. P. Pamela, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-tri… ▽ More Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-triggered ELMs are simulated by injecting deuterium pellets into different time points during the pedestal build-up described in [A. Cathey et al. Nuclear Fusion 60, 124007 (2020)]. Realistic ExB and diamagnetic background plasma flows as well as the time dependent bootstrap current evolution are included during the build-up to capture the balance between stabilising and destabilising terms for the edge instabilities accurately. Dependencies on the pellet size and injection times are studied. The spatio-temporal structures of the modes and the resulting divertor heat fluxes are compared in detail between spontaneous and triggered ELMs. We observe that the premature excitation of ELMs by means of pellet injection is caused by a helical perturbation described by a toroidal mode number of n = 1. In accordance with experimental observations, the pellet-triggered ELMs show reduced thermal energy losses and narrower divertor wetted area with respect to spontaneous ELMs. The peak divertor energy fluency is seen to decrease when ELMs are triggered by pellets injected earlier during the pedestal build-up. △ Less

Submitted 11 February, 2021; originally announced February 2021.

EDGE-CALIFA survey: Self-regulation of Star formation at kpc scales

Authors: J. K. Barrera-Ballesteros, S. F. Sánchez, T. Heckman, T. Wong, A. Bolatto, E. Ostriker, E. Rosolowsky, L. Carigi, S. Vogel, R. C. Levy, D. Colombo, Yufeng Luo, Yixian Cao, the EDGE-CALIFA team

Abstract: We present the relation between the star formation rate surface density, $Σ_{\rm SFR}$, and the hydrostatic mid-plane pressure, P$_{\rm h}$, for 4260 star-forming regions of kpc size located in 96 galaxies included in the EDGE-CALIFA survey covering a wide range of stellar masses and morphologies. We find that these two parameters are tightly correlated, exhibiting smaller scatter and strong corre… ▽ More We present the relation between the star formation rate surface density, $Σ_{\rm SFR}$, and the hydrostatic mid-plane pressure, P$_{\rm h}$, for 4260 star-forming regions of kpc size located in 96 galaxies included in the EDGE-CALIFA survey covering a wide range of stellar masses and morphologies. We find that these two parameters are tightly correlated, exhibiting smaller scatter and strong correlation in comparison to other star-forming scaling relations. A power-law, with a slightly sub-linear index, is a good representation of this relation. Locally, the residuals of this correlation show a significant anti-correlation with both the stellar age and metallicity whereas the total stellar mass may also play a secondary role in sha** the $Σ_{\rm SFR}$ - P$_{\rm h}$ relation. For our sample of active star-forming regions (i.e., regions with large values of H$α$ equivalent width), we find that the effective feedback momentum per unit stellar mass ($p_\ast/m_\ast$),measured from the P$_{\rm h}$ / $Σ_{\rm SFR}$ ratio increases with P$_{\rm h}$. The median value of this ratio for all the sampled regions is larger than the expected momentum just from supernovae explosions. Morphology of the galaxies, including bars, does not seem to have a significant impact in the $Σ_{\rm SFR}$ - P$_{\rm h}$ relation. Our analysis suggests that self regulation of the $Σ_{\rm SFR}$ at kpc scales comes mainly from momentum injection to the interstellar medium from supernovae explosions. However, other mechanism in disk galaxies may also play a significant role in sha** the $Σ_{\rm SFR}$ at local scales. Our results also suggest that P$_{\rm h}$ can be considered as the main parameter that modulates star formation at kpc scales, rather than individual components of the baryonic mass. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Comments: 19 pages, 12 figures, submitted to MNRAS November 16 2020

Electron runaway in ASDEX Upgrade experiments of varying core temperature

Authors: O. Linder, G. Papp, E. Fable, F. Jenko, G. Pautasso, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The formation of a substantial post-disruption runaway electron current in ASDEX Upgrade material injection experiments is determined by avalanche multiplication of a small seed population of runaway electrons. For the investigation of these scenarios, the runaway electron description of the coupled 1.5D transport solvers ASTRA-STRAHL is amended by a fluid-model describing electron runaway caused… ▽ More The formation of a substantial post-disruption runaway electron current in ASDEX Upgrade material injection experiments is determined by avalanche multiplication of a small seed population of runaway electrons. For the investigation of these scenarios, the runaway electron description of the coupled 1.5D transport solvers ASTRA-STRAHL is amended by a fluid-model describing electron runaway caused by the hot-tail mechanism. Applied in simulations of combined background plasma evolution, material injection, and runaway electron generation in ASDEX Upgrade discharge #33108, both the Dreicer and hot-tail mechanism for electron runaway produce only $\sim$ 3$~$kA of runaway current. In colder plasmas with core electron temperatures $T_\mathrm{e,c}$ below 9$~$keV, the post-disruption runaway current is predicted to be insensitive to the initial temperature, in agreement with experimental observations. Yet in hotter plasmas with $T_\mathrm{e,c} > 10~\mathrm{keV}$, hot-tail runaway can be increased by up to an order of magnitude, contributing considerably to the total post-disruption runaway current. In ASDEX Upgrade high temperature runaway experiments, however, no runaway current is observed at the end of the disruption, despite favourable conditions for both primary and secondary runaway. △ Less

Submitted 7 May, 2021; v1 submitted 12 January, 2021; originally announced January 2021.

Comments: 26 pages, 11 figures; published in the Journal of Plasma Physics

Journal ref: Journal of Plasma Physics 87(3), 905870301 (2021)

Modelling of runaway electron dynamics during argon-induced disruptions in ASDEX Upgrade and JET

Authors: K. Insulander Björk, O. Vallhagen, G. Papp, C. Reux, O. Embreus, E. Rachlew, T. Fülöp, the ASDEX Upgrade Team, JET contributors, the EUROfusion MST1 Team

Abstract: Disruptions in tokamak plasmas may lead to the generation of runaway electrons that have the potential to damage plasma-facing components. Improved understanding of the runaway generation process requires interpretative modelling of experiments. In this work we simulate eight discharges in the ASDEX Upgrade and JET tokamaks, where argon gas was injected to trigger the disruption. We use a fluid mo… ▽ More Disruptions in tokamak plasmas may lead to the generation of runaway electrons that have the potential to damage plasma-facing components. Improved understanding of the runaway generation process requires interpretative modelling of experiments. In this work we simulate eight discharges in the ASDEX Upgrade and JET tokamaks, where argon gas was injected to trigger the disruption. We use a fluid modelling framework with the capability to model the generation of runaway electrons through the hot-tail, Dreicer and avalanche mechanisms, as well as runaway electron losses. Using experimentally based initial values of plasma current and electron temperature and density, we can reproduce the plasma current evolution using realistic assumptions about temperature evolution and assimilation of the injected argon in the plasma. The assumptions and results are similar for the modelled discharges in ASDEX Upgrade and JET, indicating that the implemented models are applicable to machines of varying size, which is important for the modelling of future, larger machines. For the modelled discharges in ASDEX Upgrade, where the initial temperature was comparatively high, we had to assume that a large fraction of the hot-tail runaway electrons were lost in order to reproduce the measured current evolution. △ Less

Submitted 30 June, 2021; v1 submitted 6 January, 2021; originally announced January 2021.

Comments: 17 pages, 7 figures

Tomographic reconstruction of the runaway distribution function in TCV using multispectral synchrotron images

Authors: T. A. Wijkamp, A. Perek, J. Decker, B. Duval, M. Hoppe, G. Papp, U. A. Sheikh, I. G. J. Classen, R. J. E. Jaspers, the TCV team, the EUROfusion MST1 team

Abstract: Synchrotron radiation observed in a quiescent TCV runaway discharge is studied using filtered camera images targeting three distinct wavelength intervals. Through the tomographic SART procedure the high momentum, high pitch angle part of the spatial and momentum distribution of these relativistic particles is reconstructed. Experimental estimates of the distribution are important for verification… ▽ More Synchrotron radiation observed in a quiescent TCV runaway discharge is studied using filtered camera images targeting three distinct wavelength intervals. Through the tomographic SART procedure the high momentum, high pitch angle part of the spatial and momentum distribution of these relativistic particles is reconstructed. Experimental estimates of the distribution are important for verification and refinement of formation-, decay- and transport-models underlying runaway avoidance and mitigation strategy design. Using a test distribution it is demonstrated that the inversion procedure provides estimates accurate to within a few tens of percent in the region of phase-space contributing most to the synchrotron image. We find that combining images filtered around different parts of the emission spectrum widens the probed part of momentum-space and reduces reconstruction errors. Next, the SART algorithm is used to obtain information on the spatiotemporal runaway momentum distribution in a selected TCV discharge. The momentum distribution is found to relax towards an avalanche-like exponentially decaying profile. Anomalously high pitch angles and a radial profile increasing towards the edge are found for the most strongly emitting particles in the distribution. Pitch angle scattering by toroidal magnetic field ripple is consistent with this picture. An alternative explanation is the presence of high frequency instabilities in combination with the formation of a runaway shell at the edge of the plasma. △ Less

Submitted 5 February, 2021; v1 submitted 30 October, 2020; originally announced November 2020.

Comments: 18 pages, 13 figures, submitted to Nuclear Fusion

Runaway electron modelling in the self-consistent core European Transport Simulator, ETS

Authors: Gergo I. Pokol, Soma Olasz, Boglarka Erdos, Gergely Papp, Matyas Aradi, Mathias Hoppe, Thomas Johnson, Jorge Ferreira, David Coster, Yves Peysson, Joan Decker, Par Strand, Dimitriy Yadikin, Denis Kalupin, the EUROfusion-IM Team

Abstract: Relativistic runaway electrons are a major concern in tokamaks. The European framework for Integrated Modelling (EU-IM), facilitates the integration of different plasma simulation tools by providing a standard data structure for communication that enables relatively easy integration of different physics codes. A three-level modelling approach was adopted for runaway electron simulations within the… ▽ More Relativistic runaway electrons are a major concern in tokamaks. The European framework for Integrated Modelling (EU-IM), facilitates the integration of different plasma simulation tools by providing a standard data structure for communication that enables relatively easy integration of different physics codes. A three-level modelling approach was adopted for runaway electron simulations within the EU-IM. Recently, a number of runaway electron modelling modules have been integrated into this framework. The first level of modelling (Runaway Indicator) is limited to the indication if runaway electron generation is possible or likely. The second level (Runaway Fluid) adopts an approach similar to e.g. the GO code, using analytical formulas to estimate changes in the runaway electron current density. The third level is based on the solution of the electron kinetics. One such code is LUKE that can handle the toroidicity-induced effects by solving the bounce-averaged Fokker-Planck equation. Another approach is used in NORSE, which features a fully nonlinear collision operator that makes it capable of simulating major changes in the electron distribution, for example slide-away. Both codes handle the effect of radiation on the runaway distribution. These runaway-electron modelling codes are in different stages of integration into the EU-IM infrastructure, and into the European Transport Simulator (ETS), which is a fully capable modular 1.5D core transport simulator. ETS with Runaway Fluid was benchmarked to the GO code implementing similar physics. Coherent integration of kinetic solvers requires more effort on the coupling, especially regarding the definition of the boundary between runaway and thermal populations, and on consistent calculation of resistivity. Some of these issues are discussed. △ Less

Submitted 30 September, 2020; originally announced September 2020.

Journal ref: Nuclear Fusion, 59, 076024 (2019)

A novel hydrogenic spectroscopic technique for inferring the role of plasma-molecule interaction on power and particle balance during detached conditions

Authors: K Verhaegh, B Lipschultz, C Bowman, B P Duval, U Fantz, A Fil, J R Harrison, D Moulton, O Myatra, D Wünderlich, F Federici, D S Gahle, A Perek, M Wensing, the TCV team, the EuroFusion MST1 team

Abstract: Detachment, an important mechanism for reducing target heat deposition, is achieved through reductions in power, particle and momentum; which are induced through plasma-atom and plasma-molecule interactions. Experimental research in how those reactions precisely contribute to detachment is limited. In this work, we investigate a new spectroscopic technique to utilise Hydrogen Balmer line measureme… ▽ More Detachment, an important mechanism for reducing target heat deposition, is achieved through reductions in power, particle and momentum; which are induced through plasma-atom and plasma-molecule interactions. Experimental research in how those reactions precisely contribute to detachment is limited. In this work, we investigate a new spectroscopic technique to utilise Hydrogen Balmer line measurements to 1) disentangle the Balmer line emission from the various plasma-atom and plasma-molecule interactions; and 2) quantify their contributions to ionisation, recombination and radiative power losses. During detachment, the observed $Hα$ emission often strongly increases, which could be an indicator for plasma-molecule interactions involving $H_2^+$ and/or $H^-$. Our analysis technique quantifies the $Hα$ emission due to plasma-molecule interactions and uses this to 1) quantify the Balmer line emission contribution due to $H_2^+$ and/or $H^-$; 2) subsequently estimate its resulting particle sinks/sources and radiative power losses. Its performance is verified using synthetic diagnostic techniques of both detached TCV and MAST-U SOLPS-ITER simulations. Experimental results of this technique on TCV data show a bifurcation occurs between the measured total $Hα$ and the atomic estimate of $Hα$ emission, indicative of the presence of additional $Hα$ due to plasma-molecule interactions with $H_2^+$ (and/or $H^-$). An example analysis shows that the hydrogenic line series, even $Lyα$ as well as the medium-n Balmer lines can be significantly influenced by plasma-molecule interactions by tens of percent during which significant Molecular Activated Recombination (MAR) is expected. △ Less

Submitted 17 February, 2021; v1 submitted 1 August, 2020; originally announced August 2020.

Journal ref: Plasma Phys. Control. Fusion 63 035018 (2021)

Non-linear extended MHD simulations of type-I edge localised mode cycles in ASDEX Upgrade and their underlying triggering mechanism

Authors: Andres Cathey, M. Hoelzl, K. Lackner, G. T. A. Huijsmans, M. G. Dunne, E. Wolfrum, S. J. P. Pamela, F. Orain, S. Günter, the JOREK team, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear inter… ▽ More A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear interactions between the axisymmetric background plasma and growing non-axisymmetric perturbations. The separation of timescales prompts the explosive, i.e. faster than exponential, growth of an ELM crash which lasts ${\sim}$ 500 $μ$s. The duration and size of the simulated ELM crashes compare qualitatively well with type-I ELMs in ASDEX Upgrade. As expected for type-I ELMs, a direct proportionality between the heating power in the simulations and the ELM repetition frequency is obtained. The simulations presented here are a major step forward towards predictive modelling of ELMs and of the assessment of mitigation techniques in ITER and other future tokamaks. △ Less

Submitted 26 October, 2020; v1 submitted 20 July, 2020; originally announced July 2020.

I-mode pedestal relaxation events at ASDEX Upgrade

Authors: D. Silvagni, T. Eich, T. Happel, G. F. Harrer, M. Griener, M. Dunne, M. Cavedon, M. Faitsch, L. Gil, D. Nille, B. Tal, R. Fischer, U. Stroth, D. Brida, P. David, P. Manz, E. Viezzer, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron temperature and density edge profiles, with the largest drop found at the pedestal top position. Stability analysis of edge profiles reveals that the operation… ▽ More The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron temperature and density edge profiles, with the largest drop found at the pedestal top position. Stability analysis of edge profiles reveals that the operational points are far from the ideal peeling-ballooning boundary. Also, we show that these events appear close to the H-mode transition in the typical I-mode operational space in ASDEX Upgrade, and that no further enhancement of energy confinement is found when they occur. Moreover, scrape-off layer transport during these events is found to be very similar to type-I ELMs, with regard to timescales ($\approx$ 800 $μ$s), filament propagation, toroidally asymmetric energy effluxes at the midplane and asymmetry between inner and outer divertor deposited energy. In particular, the latter reveals that more energy reaches the outer divertor target. Lastly, first measurements of the divertor peak energy fluence are reported, and projections to ARC - a reactor designed to operate in I-mode - are drawn. △ Less

Submitted 19 June, 2020; originally announced June 2020.

Spatiotemporal analysis of the runaway distribution function from synchrotron images in an ASDEX Upgrade disruption

Authors: M. Hoppe, L. Hesslow, O. Embreus, L. Unnerfelt, G. Papp, I. Pusztai, T. Fülöp, O. Lexell, T. Lunt, E. Macusova, P. J. McCarthy, G. Pautasso, G. I. Pokol, G. Por, P. Svensson, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: Synchrotron radiation images from runaway electrons (REs) in an ASDEX Upgrade discharge disrupted by argon injection are analyzed using the synchrotron diagnostic tool SOFT and coupled fluid-kinetic simulations. We show that the evolution of the runaway distribution is well described by an initial hot-tail seed population, which is accelerated to energies between 25-50 MeV during the current quenc… ▽ More Synchrotron radiation images from runaway electrons (REs) in an ASDEX Upgrade discharge disrupted by argon injection are analyzed using the synchrotron diagnostic tool SOFT and coupled fluid-kinetic simulations. We show that the evolution of the runaway distribution is well described by an initial hot-tail seed population, which is accelerated to energies between 25-50 MeV during the current quench, together with an avalanche runaway tail which has an exponentially decreasing energy spectrum. We find that, although the avalanche component carries the vast majority of the current, it is the high-energy seed remnant that dominates synchrotron emission. With insights from the fluid-kinetic simulations, an analytic model for the evolution of the runaway seed component is developed and used to reconstruct the radial density profile of the RE beam. The analysis shows that the observed change of the synchrotron pattern from circular to crescent shape is caused by a rapid redistribution of the radial profile of the runaway density. △ Less

Submitted 5 February, 2021; v1 submitted 29 May, 2020; originally announced May 2020.

Comments: 25 pages, 12 figures

Journal ref: Journal of Plasma Physics, Volume 87, Issue 1, February 2021, 855870102

Recent progress towards a quantitative description of filamentary SOL transport

Authors: D. Carralero, M. Siccinio, M. Komm, S. A. Artene, F. A. D'Isa, J. Adamek, L. Aho-Mantila, G. Birkenmeier, M. Brix, G. Fuchert, M. Groth, T. Lunt, P. Manz, J. Madsen, S. Marsen, H. W. Müller, U. Stroth, H. J. Sun, N. Vianello, M. Wischmeier, E. Wolfrum, ASDEX Upgrade Team, COMPASS Team, JET Contributors, the EUROfusion MST team

Abstract: A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found between L-mode density shoulder formation in the outer midplane and a transition between the sheath limited and the inertial filamentary regimes. Divertor collision… ▽ More A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found between L-mode density shoulder formation in the outer midplane and a transition between the sheath limited and the inertial filamentary regimes. Divertor collisionality is found to be the parameter triggering the transition. A clear reduction of the ion temperature takes place in the far SOL after the transition, both for the background and the filaments. This coincides with a strong variation of the ion temperature distribution, which deviates from Gaussianity and becomes dominated by a strong peak below $5$ eV. The filament transition mechanism triggered by a critical value of collisionality seems to be generally applicable to inter-ELM H-mode plasmas, although a secondary threshold related to deuterium fueling is observed. EMC3-EIRENE simulations of neutral dynamics show that an ionization front near the main chamber wall is formed after the shoulder formation. Finally, a clear increase of SOL opacity to neutrals is observed associated to the shoulder formation. A common SOL transport framework is proposed account for all these results, and their potential implications for future generation devices are discussed. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: Published in Nuclear Fusion

On the role of filaments in perpendicular heat transport at the Scrape-off Layer

Authors: D. Carralero, S. Artene, M. Bernert, G. Birkenmeier, M. Faitsch, P. Manz, P. deMarne, U. Stroth, M. Wischmeier, E. Wolfrum, the ASDEX Upgrade team, the EURO-fusion MST1 Team

Abstract: In this work we carry out quantitative measurements of particle and heat transport associated to SOL filaments in a tokamak, and relate density shoulder formation to the advection of energy in the far SOL. For the first time, this attempt includes direct measurements of ion and electron temperatures for background and filaments. With this aim, we combine data from a number of equivalent L-mode dis… ▽ More In this work we carry out quantitative measurements of particle and heat transport associated to SOL filaments in a tokamak, and relate density shoulder formation to the advection of energy in the far SOL. For the first time, this attempt includes direct measurements of ion and electron temperatures for background and filaments. With this aim, we combine data from a number of equivalent L-mode discharges from the ASDEX Upgrade tokamak in which different probe heads were installed on the midplane manipulator. This approach is validated by a comparison with independent diagnostics. Results indicate an increase of heat transport associated to filaments after the shoulder formation. Several centimeters into the SOL, filaments are still found to carry a substantial fraction (up to one fifth) of the power ejected at the separatrix. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: Published in Nucler Fusion

Kinetic modelling of runaway electron generation in argon-induced disruptions in ASDEX Upgrade

Authors: K. Insulander Björk, G. Papp, O. Embreus, L. Hesslow, T. Fülöp, O. Vallhagen, A. Lier, G. Pautasso, A. Bock, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: Massive material injection has been proposed as a way to mitigate the formation of a beam of relativistic runaway electrons that may result from a disruption in tokamak plasmas. In this paper we analyse runaway generation observed in eleven ASDEX Upgrade discharges where disruption was triggered using massive gas injection. We present numerical simulations in scenarios characteristic of on-axis pl… ▽ More Massive material injection has been proposed as a way to mitigate the formation of a beam of relativistic runaway electrons that may result from a disruption in tokamak plasmas. In this paper we analyse runaway generation observed in eleven ASDEX Upgrade discharges where disruption was triggered using massive gas injection. We present numerical simulations in scenarios characteristic of on-axis plasma conditions, constrained by experimental observations, using a description of the runaway dynamics with self-consistent electric field and temperature evolution in two-dimensional momentum space and zero-dimensional real space. We describe the evolution of the electron distribution function during the disruption, and show that the runaway seed generation is dominated by hot-tail in all of the simulated discharges. We reproduce the observed dependence of the current dissipation rate on the amount of injected argon during the runaway plateau phase. Our simulations also indicate that above a threshold amount of injected argon, the current density after the current quench depends strongly on the argon densities. This trend is not observed in the experiments, which suggests that effects not captured by 0D kinetic modeling -- such as runaway seed transport -- are also important. △ Less

Submitted 27 August, 2020; v1 submitted 20 April, 2020; originally announced May 2020.

Comments: 17 pages, 15 figures, published in Journal of Plasma Physics (Invited Contributions from the 18th European Fusion Theory Conference)

Journal ref: Journal of Plasma Physics (2020) 86(4), 855860401

Self-consistent modeling of runaway electron generation in massive gas injection scenarios in ASDEX Upgrade

Authors: O. Linder, E. Fable, F. Jenko, G. Papp, G. Pautasso, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: We present the first successful simulation of a induced disruption in ASDEX Upgrade from massive material injection (MMI) up to established runaway electron (RE) beam, thus covering pre-thermal quench, thermal quench and current quench (CQ) of the discharge. For future high-current fusion devices such as ITER, the successful suppression of REs through MMI is of critical importance to ensure the st… ▽ More We present the first successful simulation of a induced disruption in ASDEX Upgrade from massive material injection (MMI) up to established runaway electron (RE) beam, thus covering pre-thermal quench, thermal quench and current quench (CQ) of the discharge. For future high-current fusion devices such as ITER, the successful suppression of REs through MMI is of critical importance to ensure the structural integrity of the vessel. To computationally study the interplay between MMI, background plasma response, and RE generation, a toolkit based on the 1.5D transport code coupling ASTRA-STRAHL is developed. Electron runaway is described by state-of-the-art reduced kinetic models in the presence of partially ionized impurities. Applied to argon MMI in ASDEX Upgrade discharge #33108, key plasma parameters measured experimentally, such as temporal evolution of the line averaged electron density, plasma current decay rate and post-CQ RE current, are well reproduced by the simulation presented. Impurity ions are transported into the central plasma by the combined effect of neoclassical processes and additional effects prescribed inside the $q = 2$ rational surface to explain experimental time scales. Thus, a thermal collapse is induced through strong impurity radiation, giving rise to a substantial RE population as observed experimentally. △ Less

Submitted 2 March, 2020; originally announced March 2020.

Comments: 15 pages, 11 figures; submitted to Nuclear Fusion

Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade

Authors: O. Linder, J. Citrin, G. M. D. Hogeweij, C. Angioni, C. Bourdelle, F. J. Casson, E. Fable, A. Ho, F. Koechl, M. Sertoli, the EUROfusion MST1 Team, the ASDEX Upgrade Team

Abstract: Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasili… ▽ More Neoclassical and turbulent heavy impurity transport in tokamak core plasmas are determined by main ion temperature, density and toroidal rotation profiles. Thus, in order to understand and prevent experimental behaviour of W accumulation, flux-driven integrated modelling of main ion heat and particle transport over multiple confinement times is a vital prerequisite. For the first time, the quasilinear gyrokinetic code QuaLiKiz has been applied for successful predictions of core kinetic profiles in an ASDEX Upgrade H-mode discharge in the turbulence dominated region within the integrated modelling suite JETTO. Neoclassical contributions are calculated by NCLASS; auxiliary heat and particle deposition profiles due to NBI and ECRH prescribed from previous analysis with TRANSP. Turbulent and neoclassical contributions are insufficient in explaining main ion heat and particle transport inside the $q=1$ surface, necessitating the prescription of further transport coefficients to mimic the impact of MHD activity on central transport. The ion to electron temperature ratio at the simulation boundary at $ρ_\mathrm{tor} = 0.85$ stabilizes ion scale modes while destabilizing ETG modes when significantly exceeding unity. Careful analysis of experimental measurements using Gaussian process regression techniques is carried out to explore reasonable uncertainties. In following trace W impurity transport simulations performed with additionally NEO, neoclassical transport under consideration of poloidal asymmetries alone is found to be insufficient to establish hollow central W density profiles. Reproduction of these conditions measured experimentally is found possible only when assuming the direct impact of a saturated $(m,n)=(1,1)$ MHD mode on heavy impurity transport. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Comments: 26 pages, 17 figures

Journal ref: Nucl. Fusion 59 (2019) 016003

ESPRESSO's Early Commissioning Results and Performance Related to Tests of Fundamental Constant Stability

Authors: A. C. O. Leite, C. J. A. P. Martins, P. Molaro, S. Monai, C. S. Alves, T. A. Silva, the ESPRESSO Science Team

Abstract: ESPRESSO is a new high-resolution ultra-stable spectrograph for the VLT, which had its first light on Telescope on November 27th, 2017. The instrument is installed in the Combined Coudé Laboratory and linked to the 4 Units of Telescope through optical Coudé Trains, being the first spectrograph able to collect the light from the 4 UTs simultaneously. One of the key science goals of the instrument i… ▽ More ESPRESSO is a new high-resolution ultra-stable spectrograph for the VLT, which had its first light on Telescope on November 27th, 2017. The instrument is installed in the Combined Coudé Laboratory and linked to the 4 Units of Telescope through optical Coudé Trains, being the first spectrograph able to collect the light from the 4 UTs simultaneously. One of the key science goals of the instrument is to test the stability of nature's fundamental couplings with unprecedented resolution and stability. ESPRESSO will allow to eliminate current known systematics and test the claim by Webb et al 2012 of a spatial dipole in the variation of the fine-structure constant. These improved results (either null or variation detections) will put strong constraints on a range of cosmological and particle physics parameters. △ Less

Submitted 14 December, 2018; originally announced December 2018.

Comments: Oral contribution at the 53rd Moriond Conference (Cosmology Session, March 2018), published in its proceedings

Analytical expressions for thermophysical properties of solid and liquid tungsten relevant for fusion applications

Authors: P. Tolias, the EUROfusion MST1 Team

Abstract: The status of the literature is reviewed for several thermophysical properties of pure solid and liquid tungsten which constitute input for the modelling of intense plasma-surface interaction phenomena that are important for fusion applications. Reliable experimental data are analyzed for the latent heat of fusion, the electrical resistivity, the specific isobaric heat capacity, the thermal conduc… ▽ More The status of the literature is reviewed for several thermophysical properties of pure solid and liquid tungsten which constitute input for the modelling of intense plasma-surface interaction phenomena that are important for fusion applications. Reliable experimental data are analyzed for the latent heat of fusion, the electrical resistivity, the specific isobaric heat capacity, the thermal conductivity and the mass density from the room temperature up to the boiling point of tungsten as well as for the surface tension and the dynamic viscosity across the liquid state. Analytical expressions of high accuracy are recommended for these thermophysical properties that involved a minimum degree of extrapolations. In particular, extrapolations were only required for the surface tension and viscosity. △ Less

Submitted 4 July, 2017; v1 submitted 18 March, 2017; originally announced March 2017.

Journal ref: Nuclear Materials and Energy 13, 42-57 (2017)

Three dimensional boundary displacement due to stable ideal kink modes excited by external n=2 magnetic perturbations

Authors: M. Willensdorfer, E. Strumberger, W. Suttrop, M. Dunne, R. Fischer, G. Birkenmeier, D. Brida, M. Cavedon, S. S. Denk, V. Igochine, L. Giannone, A. Kirk, J. Kirschner, A. Medvedeva, T. Odstrcil, D. A. Ryan, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: In low-collisionality scenarios exhibiting mitigation of edge localized modes (ELMs), stable ideal kink modes at the edge are excited by externally applied magnetic perturbation (MP)-fields. In ASDEX Upgrade these modes can cause three-dimensional (3D) boundary displacements up to the centimeter range. These displacements have been measured using toroidally localized high resolution diagnostics an… ▽ More In low-collisionality scenarios exhibiting mitigation of edge localized modes (ELMs), stable ideal kink modes at the edge are excited by externally applied magnetic perturbation (MP)-fields. In ASDEX Upgrade these modes can cause three-dimensional (3D) boundary displacements up to the centimeter range. These displacements have been measured using toroidally localized high resolution diagnostics and rigidly rotating n = 2 MP-fields with various applied poloidal mode spectra. These measurements are compared to non-linear 3D ideal magnetohydrodynamics (MHD) equilibria calculated by VMEC. Comprehensive comparisons have been conducted, which consider for instance plasma movements due to the position control system, attenuation due to internal conductors and changes in the edge pressure profiles. VMEC accurately reproduces the amplitude of the displacement and its dependencies on the applied poloidal mode spectra. Quantitative agreement is found around the low field side (LFS) midplane. The response at the plasma top is qualitatively compared. The measured and predicted displacements at the plasma top maximize when the applied spectra is optimized for ELM-mitigation. The predictions from the vacuum modeling generally fails to describe the displacement at the LFS midplane as well as at the plasma top. When the applied mode spectra is set to maximize the displacement, VMEC and the measurements clearly surpass the predictions from the vacuum modeling by a factor of four. Minor disagreements between VMEC and the measurements are discussed. This study underlines the importance of the stable ideal kink modes at the edge for the 3D boundary displacement in scenarios relevant for ELM-mitigation. △ Less

Submitted 24 July, 2017; v1 submitted 10 February, 2017; originally announced February 2017.

Comments: 22 pages, 12 figure, for submission to nuclear fusion

Journal ref: Nucl. Fusion 57 (2017) 116047 (12pp)

Overview of recent physics results from MAST

Authors: A Kirk, J Adamek, RJ Akers, S Allan, L Appel, F Arese Lucini, M Barnes, T Barrett, N Ben Ayed, W Boeglin, J Bradley, P K Browning, J Brunner, P Cahyna, M Carr, F Casson, M Cecconello, C Challis, IT Chapman, S Chapman, S Conroy, N Conway, WA Cooper, M Cox, N Crocker , et al. (138 additional authors not shown)

Abstract: New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbu… ▽ More New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbulence. At the edge detailed studies have revealed how filament characteristic are responsible for determining the near and far SOL density profiles. In the core the intrinsic rotation and electron scale turbulence have been measured. The role that the fast ion gradient has on redistributing fast ions through fishbone modes has led to a redesign of the neutral beam injector on MAST Upgrade. In H-mode the turbulence at the pedestal top has been shown to be consistent with being due to electron temperature gradient modes. A reconnection process appears to occur during ELMs and the number of filaments released determines the power profile at the divertor. Resonant magnetic perturbations can mitigate ELMs provided the edge peeling response is maximised and the core kink response minimised. The mitigation of intrinsic error fields with toroidal mode number n>1 has been shown to be important for plasma performance. △ Less

Submitted 18 November, 2016; originally announced November 2016.

Comments: 34 pages, 10 figures. This is an author-created, un-copyedited version of an article submitted for publication in Nuclear Fusion. IoP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it

Non-linear modeling of the plasma response to RMPs in ASDEX Upgrade

Authors: F. Orain, M. Hoelzl, E. Viezzer, M. Dunne, M. Becoulet, P. Cahyna, G. T. A. Huijsmans, J. Morales, M. Willensdorfer, W. Suttrop, A. Kirk, S. Pamela, E. Strumberger, S. Guenter, A. Lessig, the ASDEX Upgrade Team, the EUROfusion MST1 Team

Abstract: The plasma response to Resonant Magnetic Perturbations (RMPs) in ASDEX Upgrade is modeled with the non-linear resistive MHD code JOREK, using input profiles that match those of the experiments as closely as possible. The RMP configuration for which Edge Localized Modes are best mitigated in experiments is related to the largest edge kink response observed near the X-point in modeling. On the edge… ▽ More The plasma response to Resonant Magnetic Perturbations (RMPs) in ASDEX Upgrade is modeled with the non-linear resistive MHD code JOREK, using input profiles that match those of the experiments as closely as possible. The RMP configuration for which Edge Localized Modes are best mitigated in experiments is related to the largest edge kink response observed near the X-point in modeling. On the edge resonant surfaces $q = m/n$, the coupling between the m + 2 kink component and the m resonant component is found to induce the amplification of the resonant magnetic perturbation. The ergodicity and the 3D-displacement near the X-point induced by the resonant amplification can only partly explain the density pumpout observed in experiments. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: Submitted to Nuclear Fusion 18 pages (19 pages with Arxiv's compilation formatting), 13 figures

Pellet refuelling of particle loss due to ELM mitigation with RMPs in the ASDEX Upgrade tokamak at low collisionality

Authors: M Valovič, P T Lang, A Kirk, W Suttrop, M Cavedon, L R Fischer, L Garzotti, L Guimarais, G Kocsis, G Cseh, B Plőckl, T Szepesi, A Thornton, A Mlynek, G Tardini, E Viezzer, R Scannell, E Wolfrum, the ASDEX Upgrade team, the EUROfusion MST1 team

Abstract: The complete refuelling of the plasma density loss (pump-out) caused by mitigation of Edge Localised Modes (ELMs) is demonstrated on the ASDEX Upgrade tokamak. The plasma is refuelled by injection of frozen deuterium pellets and ELMs are mitigated by external resonant magnetic perturbations (RMPs). In this experiment relevant dimensionless parameters, such as relative pellet size, relative RMP amp… ▽ More The complete refuelling of the plasma density loss (pump-out) caused by mitigation of Edge Localised Modes (ELMs) is demonstrated on the ASDEX Upgrade tokamak. The plasma is refuelled by injection of frozen deuterium pellets and ELMs are mitigated by external resonant magnetic perturbations (RMPs). In this experiment relevant dimensionless parameters, such as relative pellet size, relative RMP amplitude and pedestal collisionality are kept at the ITER like values. Refuelling of density pump out requires a factor of two increase of nominal fuelling rate. Energy confinement and pedestal temperatures are not restored to pre-RMP values by pellet refuelling. △ Less

Submitted 7 October, 2015; originally announced October 2015.

Comments: 10 pages, 5 figures. This is an author-created, un-copyedited version of an article submitted for publication in Nuclear Fusion. IoP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it

Journal ref: 2016 Nucl. Fusion 56 066009

Einstein Probe - a small mission to monitor and explore the dynamic X-ray Universe

Authors: Weimin Yuan, C. Zhang, H. Feng, S. N. Zhang, Z. X. Ling, D. Zhao, J. Deng, Y. Qiu, J. P. Osborne, P. O'Brien, R. Willingale, J. La**ton, G. W. Fraser, the Einstein Probe team

Abstract: Einstein Probe is a small mission dedicated to time-domain high-energy astrophysics. Its primary goals are to discover high-energy transients and to monitor variable objects in the $0.5-4~$keV X-rays, at higher sensitivity by one order of magnitude than those of the ones currently in orbit. Its wide-field imaging capability, featuring a large instantaneous field-of-view ($60^\circ \times60^\circ$,… ▽ More Einstein Probe is a small mission dedicated to time-domain high-energy astrophysics. Its primary goals are to discover high-energy transients and to monitor variable objects in the $0.5-4~$keV X-rays, at higher sensitivity by one order of magnitude than those of the ones currently in orbit. Its wide-field imaging capability, featuring a large instantaneous field-of-view ($60^\circ \times60^\circ$, $\sim1.1$sr), is achieved by using established technology of micro-pore (MPO) lobster-eye optics, thereby offering unprecedentedly high sensitivity and large Grasp. To complement this powerful monitoring ability, it also carries a narrow-field, sensitive follow-up X-ray telescope based on the same MPO technology to perform follow-up observations of newly-discovered transients. Public transient alerts will be downlinked rapidly, so as to trigger multi-wavelength follow-up observations from the world-wide community. Over three of its 97-minute orbits almost the entire night sky will be sampled, with cadences ranging from 5 to 25 times per day. The scientific objectives of the mission are: to discover otherwise quiescent black holes over all astrophysical mass scales by detecting their rare X-ray transient flares, particularly tidal disruption of stars by massive black holes at galactic centers; to detect and precisely locate the electromagnetic sources of gravitational-wave transients; to carry out systematic surveys of X-ray transients and characterize the variability of X-ray sources. Einstein Probe has been selected as a candidate mission of priority (no further selection needed) in the Space Science Programme of the Chinese Academy of Sciences, aiming for launch around 2020. △ Less

Submitted 21 July, 2015; v1 submitted 25 June, 2015; originally announced June 2015.

Comments: accepted to publish in PoS, Proceedings of "Swift: 10 Years of Discovery" (Proceedings of Science; ed. by P. Caraveo, P. D'Avanzo, N. Gehrels and G. Tagliaferri). Minor changes in text, references updated

The Proposed High Energy Telescope (HET) for EXIST

Authors: J. Hong, J. Grindlay, B. Allen, G. Skinner, S. Barthelmy, N. Gehrels, A. Garson, H. Krawczynski, W. Cook, F. Harrison, L. Natalucci, P. Ubertini, the EXIST/HET team

Abstract: The hard X-ray sky now being studied by INTEGRAL and Swift and soon by NuSTAR is rich with energetic phenomena and highly variable non-thermal phenomena on a broad range of timescales. The High Energy Telescope (HET) on the proposed Energetic X-ray Imaging Survey Telescope (EXIST) mission will repeatedly survey the full sky for rare and luminous hard X-ray phenomena at unprecedented sensitivities.… ▽ More The hard X-ray sky now being studied by INTEGRAL and Swift and soon by NuSTAR is rich with energetic phenomena and highly variable non-thermal phenomena on a broad range of timescales. The High Energy Telescope (HET) on the proposed Energetic X-ray Imaging Survey Telescope (EXIST) mission will repeatedly survey the full sky for rare and luminous hard X-ray phenomena at unprecedented sensitivities. It will detect and localize (<20", at 5 sigma threshold) X-ray sources quickly for immediate followup identification by two other onboard telescopes - the Soft X-ray imager (SXI) and Optical/Infrared Telescope (IRT). The large array (4.5 m^2) of imaging (0.6 mm pixel) CZT detectors in the HET, a coded-aperture telescope, will provide unprecedented high sensitivity (~0.06 mCrab Full Sky in a 2 year continuous scanning survey) in the 5 - 600 keV band. The large field of view (90 deg x 70 deg) and zenith scanning with alternating-orbital nodding motion planned for the first 2 years of the mission will enable nearly continuous monitoring of the full sky. A 3y followup pointed mission phase provides deep UV-Optical-IR-Soft X-ray and Hard X-ray imaging and spectroscopy for thousands of sources discovered in the Survey. We review the HET design concept and report the recent progress of the CZT detector development, which is underway through a series of balloon-borne wide-field hard X-ray telescope experiments, ProtoEXIST. We carried out a successful flight of the first generation of fine pixel large area CZT detectors (ProtoEXIST1) on Oct 9, 2009. We also summarize our future plan (ProtoEXIST2 & 3) for the technology development needed for the HET. △ Less

Submitted 20 September, 2010; originally announced September 2010.

Comments: 10 pages, 13 figures, 2 tables, SPIE Conference "Astronomical Telescopes and Instrumentation 2010"; to appear in Proceedings SPIE (2010)

Studying the atmosphere of the exoplanet HAT-P-7b via secondary eclipse measurements with EPOXI, Spitzer and Kepler

Authors: Jessie L. Christiansen, Sarah Ballard, David Charbonneau, N. Madhusudhan, Sara Seager, Matthew J. Holman, Dennis D. Wellnitz, Drake Deming, Michael F. A'Hearn, the EPOXI team

Abstract: The highly irradiated transiting exoplanet, HAT-P-7b, currently provides one of the best opportunities for studying planetary emission in the optical and infrared wavelengths. We observe six near-consecutive secondary eclipses of HAT-P-7b at optical wavelengths with the EPOXI spacecraft. We place an upper limit on the relative eclipse depth of 0.055% (95% confidence). We also analyze Spitzer obs… ▽ More The highly irradiated transiting exoplanet, HAT-P-7b, currently provides one of the best opportunities for studying planetary emission in the optical and infrared wavelengths. We observe six near-consecutive secondary eclipses of HAT-P-7b at optical wavelengths with the EPOXI spacecraft. We place an upper limit on the relative eclipse depth of 0.055% (95% confidence). We also analyze Spitzer observations of the same target in the infrared, obtaining secondary eclipse depths of 0.098+/-0.017%, 0.159+/-0.022%, 0.245+/-0.031% and 0.225+/-0.052% in the 3.6, 4.5, 5.8 and 8.0 micron IRAC bands respectively. We combine these measurements with the recently published Kepler secondary eclipse measurement, and generate atmospheric models for the day-side of the planet that are consistent with both the optical and infrared measurements. The data are best fit by models with a temperature inversion, as expected from the high incident flux. The models predict a low optical albedo of ~< 0.13, with subsolar abundances of Na, K, TiO and VO. We also find that the best fitting models predict that 10% of the absorbed stellar flux is redistributed to the night side of the planet, which is qualitatively consistent with the inefficient day-night redistribution apparent in the Kepler phase curve. Models without thermal inversions fit the data only at the 1.25 sigma level, and also require an overabundance of methane, which is not expected in the very hot atmosphere of HAT-P-7b. We also analyze the eight transits of HAT-P-7b present in the EPOXI dataset and improve the constraints on the system parameters, finding a period of P = 2.2047308+/-0.0000025 days, a stellar radius of R* = 1.824+/-0.089Rsun, a planetary radius of Rp = 1.342+/-0.068RJup and an inclination of i = 85.7+3.5-2.2 deg. △ Less

Submitted 10 December, 2009; originally announced December 2009.

Comments: 21 pages, 8 figures, accepted by the Astrophysical Journal

Journal ref: Astrophys.J.710:97-104,2010

ASKAP-EMU: Overcoming the challenges of wide deep continuum surveys

Authors: Ray P. Norris, the EMU team

Abstract: Next-generation continuum surveys will be strongly constrained by dynamic range and confusion. For example, the ASKAP-EMU (Evolutionary Map of the Universe) project will map 75% of the sky at 20cm to a sensitivity of 10 microJy - some 45 times deeper than NVSS, and is likely to be challenged by issues of confusion, cross-identification, and dynamic range. Here we describe the survey, the issues,… ▽ More Next-generation continuum surveys will be strongly constrained by dynamic range and confusion. For example, the ASKAP-EMU (Evolutionary Map of the Universe) project will map 75% of the sky at 20cm to a sensitivity of 10 microJy - some 45 times deeper than NVSS, and is likely to be challenged by issues of confusion, cross-identification, and dynamic range. Here we describe the survey, the issues, and the steps that can be taken to overcome them. We also explore ways of using multiwavelength data to penetrate well beyond the classical confusion limit, using multiwavelength data, and an innovative outreach approach to cross-identification. △ Less

Submitted 20 September, 2009; originally announced September 2009.

Comments: Panoramic Radio Astronomy: Wide-field 1-2 GHz research on galaxy evolution - PRA2009 Groningen, the Netherlands June 02-05, 2009

Journal ref: PoS PRA2009:033,2009

GRB Probes of the High-z Universe with EXIST

Authors: Jonathan Grindlay, the EXIST Team

Abstract: The Energetic X-ray Imaging Survey Telescope (EXIST) mission concept is optimized for study of high-z GRBs as probes of the early Universe. With a High Energy Telescope (HET) incorporating a 4.5m^2 5-600keV (CZT; 0.6mm pixels) detector plane for coded aperture imaging a 90deg x 70deg (>10% coding fraction) field of view with 2' resolution and <20" (90% conf.) positions for >5 sigma sources, EXIS… ▽ More The Energetic X-ray Imaging Survey Telescope (EXIST) mission concept is optimized for study of high-z GRBs as probes of the early Universe. With a High Energy Telescope (HET) incorporating a 4.5m^2 5-600keV (CZT; 0.6mm pixels) detector plane for coded aperture imaging a 90deg x 70deg (>10% coding fraction) field of view with 2' resolution and <20" (90% conf.) positions for >5 sigma sources, EXIST will perform rapid (<200sec) slews onto GRBs. Prompt images and spectra are obtained with a co-aligned soft X-ray telescope (SXI; 0.1 - 10keV) and with a 1.1m optical-IR telescope (IRT) simultaneously in 4 bands (0.3 - 0.52micron, 0.52 - 0.9micron, 0.9 - 1.38micron, and 1.38 - 2.3micron). An initial image (100s) will yield prompt identification within the HET error circle from a <2" prompt SXI position; or from VIS vs. IR dropouts or variability. An autonomous spacecraft re-point (<30") will then put the GRB on a 0.3" x 4" slit for either R = 3000 (for AB <21) or R =30 (for AB ~21-25) prompt spectra over the 0.3 - 0.9 micron and 0.9 - 2.3 micron bands. This will provide onboard redshifts within ~500-2000sec for most GRBs, reaching z ~20 (for Lyman-alpha breaks) if such GRBs exist, and spectra for studies of the host galaxy and local re-ionization patchiness as well as intervening cosmic structure. With ~600 GRBs/yr expected, including ~7-10% expected at z >7, EXIST will open a new era in studies of the early Universe as well as carry out a rich program of AGN and transient-source science. An overview of the GRB science objectives and a brief discussion of the overall mission design and operations is given, and example high-z GRB IRT spectra are shown. EXIST is being proposed to the Astro2010 Decadal Survey as a 5 year Medium Class mission that could be launched as early as 2017. △ Less

Submitted 15 April, 2009; originally announced April 2009.

Comments: 7 pages, 5 figures, 1 table; to appear in Proc. Huntsville Gamma-ray Burst Symposium, AIPC (C. Meegan, N. Gehrels and C. Kouveliotou, eds.), in press

Journal ref: AIP Conf.Proc.1133:18-24,2009

The eSMA: description and first results

Authors: Sandrine Bottinelli, Ken H. Young, Richard Chamberlin, Remo P. J. Tilanus, Mark A. Gurwell, Dave J. Wilner, Hiroko Shinnaga, Hiroshige Yoshida, Per Friberg, Huib Jan van Langevelde, Ewine F. van Dishoeck, Michiel R. Hogerheijde, A. Meredith Hughes, Robert D. Christensen, Richard E. Hills, John S. Richer, Emily Curtis, the eSMA commissioning team

Abstract: The eSMA ("extended SMA") combines the SMA, JCMT and CSO into a single facility, providing enhanced sensitivity and spatial resolution owing to the increased collecting area at the longest baselines. Until ALMA early science observing (2011), the eSMA will be the facility capable of the highest angular resolution observations at 345 GHz. The gain in sensitivity and resolution will bring new insi… ▽ More The eSMA ("extended SMA") combines the SMA, JCMT and CSO into a single facility, providing enhanced sensitivity and spatial resolution owing to the increased collecting area at the longest baselines. Until ALMA early science observing (2011), the eSMA will be the facility capable of the highest angular resolution observations at 345 GHz. The gain in sensitivity and resolution will bring new insights in a variety of fields, such as protoplanetary/transition disks, high-mass star formation, solar system bodies, nearby and high-z galaxies. Therefore the eSMA is an important facility to prepare the grounds for ALMA and train scientists in the techniques. Over the last two years, and especially since November 2006, there has been substantial progress toward making the eSMA into a working interferometer. In particular, (i) new 345-GHz receivers, that match the capabilities of the SMA system, were installed at the JCMT and CSO; (ii) numerous tests have been performed for receiver, correlator and baseline calibrations in order to determine and take into account the effects arising from the differences between the three types of antennas; (iii) first fringes at 345 GHz were obtained on August 30 2007, and the array has entered the science-verification stage. We report on the characteristics of the eSMA and its measured performance at 230 GHz and that expected at 345 GHz. We also present the results of the commissioning and some initial science-verification observations, including the first absorption measurement of the C/CO ratio in a galaxy at z=0.89, located along the line of sight to the lensed quasar PKS1830-211, and on the imaging of the vibrationally excited HCN line towards IRC+10216. △ Less

Submitted 19 August, 2008; originally announced August 2008.

Comments: 12 pages, 7 figures, paper number 7012-12, to appear in Proceedings of SPIE vol. 7012: "Ground-based and Airborne Telescopes II", SPIE conference on Astronomical Instrumentation, Marseille, 23-28 June 2008

The EVLA: Prospects for HI

Authors: Juergen Ott, Rick Perley, Michael Rupen, the EVLA team

Abstract: To continue the unparalleled success of the Very Large Array (VLA) for radio astronomy, the facility is currently being converted to become the 'Expanded VLA' (EVLA). The EVLA will radically improve the VLA in order to cover the full 0.93-50 GHz radio wavelength range without gaps, provide up to an order of magnitude better sensitivity, and to allow observations at much larger bandwidths and spe… ▽ More To continue the unparalleled success of the Very Large Array (VLA) for radio astronomy, the facility is currently being converted to become the 'Expanded VLA' (EVLA). The EVLA will radically improve the VLA in order to cover the full 0.93-50 GHz radio wavelength range without gaps, provide up to an order of magnitude better sensitivity, and to allow observations at much larger bandwidths and spectral resolution as currently possible. For observations of the 21 cm line of atomic neutral hydrogen (HI), the EVLA offers thousands of km/s velocity coverage at sub-km/s resolution for targeted observations as well as an improved spectral baseline stability. In addition, every L-band (21 cm) continuum or targeted HI observation can be set-up to simultaneously observe a full z=0-0.53 HI redshift survey at a velocity resolution of a few km/s. In turn, every HI observation will also yield deep radio continuum images of the field. These synergies will deliver a wealth of data which opens up a wide 'discovery space' to study the details of galaxy evolution and cosmology. △ Less

Submitted 29 May, 2008; originally announced May 2008.

Comments: to appear in the proceedings to the conference: "The Evolution of Galaxies through the Neutral Hydrogen Window", Arecibo, PR, USA

The CoRoT Evolution and Seismic Tools Activity: Goals and Tasks

Authors: Y. Lebreton, M. J. P. F. G. Monteiro, J. Montalban, A. Moya, A. Baglin, J. Christensen-Dalsgaard, M. -J. Goupil, E. Michel, J. Provost, I. W. Roxburgh, R. Scuflaire, the ESTA Team

Abstract: The forthcoming data expected from space missions such as CoRoT require the capacity of the available tools to provide accurate models whose numerical precision is well above the expected observational errors. In order to secure that these tools meet the specifications, a team has been established to test and, when necessary, to improve the codes available in the community. The CoRoT evolution a… ▽ More The forthcoming data expected from space missions such as CoRoT require the capacity of the available tools to provide accurate models whose numerical precision is well above the expected observational errors. In order to secure that these tools meet the specifications, a team has been established to test and, when necessary, to improve the codes available in the community. The CoRoT evolution and seismic tool activity (ESTA) has been set up with this mission. Several groups have been involved. The present paper describes the motivation and the organisation of this activity, providing the context and the basis for the presentation of the results that have been achieved so far. This is not a finished task as future even better data will continue to demand more precise and complete tools for asteroseismology. △ Less

Submitted 7 May, 2008; originally announced May 2008.

Comments: 11 pages, 3 figures, accepted for publication in Astrophysics and Space Science, 'CoRoT ESTA' special volume

Jets, Blazars and the EBL in the GLAST-EXIST Era

Authors: Jonathan E. Grindlay, the EXIST Team

Abstract: The synergy of GLAST and the proposed EXIST mission as the Black Hole Finder Probe in the Beyond Einstein Program is remarkable. With its full-sky per orbit hard X-ray imaging (3-600 keV) and "nuFnu" sensitivity comparable to GLAST, EXIST could measure variability and spectra of Blazars in the hard X-ray synchrotron component simultaneous with GLAST (~10-100GeV) measures of the inverse Compton c… ▽ More The synergy of GLAST and the proposed EXIST mission as the Black Hole Finder Probe in the Beyond Einstein Program is remarkable. With its full-sky per orbit hard X-ray imaging (3-600 keV) and "nuFnu" sensitivity comparable to GLAST, EXIST could measure variability and spectra of Blazars in the hard X-ray synchrotron component simultaneous with GLAST (~10-100GeV) measures of the inverse Compton component, thereby uniquely constraining intrinsic source spectra and allowing measured high energy spectral breaks to measure the cosmic diffuse extra-galactic background light (EBL) by determining the intervening diffuse IR photon field required to yield the observed break from photon-photon absorption. Such studies also constrain the physics of jets (and parameters and indeed the validity of SSC models) and the origin of the >100 MeV gamma-ray diffuse background likely arising from Blazars and jet-dominated sources. An overview of the EXIST mission, which could fly in the GLAST era, is given together with a synopsis of other key synergies of GLAST-EXIST science. △ Less

Submitted 30 May, 2007; originally announced May 2007.

Comments: 3 pages, 2 Figs., to appear in Proc. First GLAST Symp. (Stanford, Feb. 5-8, 2007), eds. S.Ritz, P.F.Michelson, and C.Meegan, AIP Conf. Proc

Journal ref: AIPConf.Proc.921:211-216,2007

Stellar polarimetry with ESPaDOnS

Authors: P. Petit, J. -F. Donati, The ESPaDOnS project team

Abstract: ESPaDOnS is a new-generation cross-dispersed echelle spectropolarimeter, the commissioning phase of which is scheduled at the Canada-France-Hawaii Telescope (CFHT) for spring 2004. This instrument will provide full coverage of the optical domain (370 nm to 1,000 nm) in all polarization states (circular and linear) at a resolving power of about 70,000, with a peak efficiency of 20% (telescope and… ▽ More ESPaDOnS is a new-generation cross-dispersed echelle spectropolarimeter, the commissioning phase of which is scheduled at the Canada-France-Hawaii Telescope (CFHT) for spring 2004. This instrument will provide full coverage of the optical domain (370 nm to 1,000 nm) in all polarization states (circular and linear) at a resolving power of about 70,000, with a peak efficiency of 20% (telescope and detector included). It includes a bench-mounted spectrograph, fiber-fed from a Cassegrain-mounted module including all polarimetric and calibration facilities. ESPaDOnS should be the most powerful tool dedicated to stellar spectropolarimetry, therefore opening unprecedented perspectives for major issues of stellar physics, from studies of stellar interiors to investigations of stellar atmospheres, stellar surfaces, stellar magnetic fields, and to observations of circumstellar environments and extra-solar planets. △ Less

Submitted 4 March, 2004; originally announced March 2004.

Comments: Conference "Magnetism & Activity of the Sun and Stars", J. Arnaud & N. Meunier eds., 8 pages

Journal ref: EAS Publications Series, Volume 9, 2003, pp.97

EGRET Observations of Pulsars

Authors: P. L. Nolan, the EGRET team

Abstract: EGRET can now study six pulsars since the recent detection of PSR B1951+32. Careful analysis of the three brightest pulsars shows that gamma rays are emitted through essentially the entire rotation. This calls into question the previous interpretation of the Crab's low-level emission as due entirely to its nebula. The pulse light curves have either well-separated double peaks or very broad peaks… ▽ More EGRET can now study six pulsars since the recent detection of PSR B1951+32. Careful analysis of the three brightest pulsars shows that gamma rays are emitted through essentially the entire rotation. This calls into question the previous interpretation of the Crab's low-level emission as due entirely to its nebula. The pulse light curves have either well-separated double peaks or very broad peaks which might be resolved into multiple components. The spectra are consistent with power laws over a large portion of the EGRET energy range, and many show a dropoff at a few GeV. △ Less

Submitted 16 July, 1996; originally announced July 1996.

Comments: 5 pages, 4 eps figures, A&A style macro, based on Joe Fierro's PhD dissertation, to be published in the proceedings of the Third Compton Symposium (Munich)

Journal ref: Astron.Astrophys.Suppl.Ser.120:61-64,1996