Showing 1–14 of 14 results for author: Team, t D

Correlation of the L-mode density limit with edge collisionality

Authors: Andrew Maris, Cristina Rea, Alessandro Pau, Wenhui Hu, Bingjia Xiao, Robert Granetz, Earl Marmar, the EUROfusion Tokamak Exploitation team, the Alcator C-Mod team, the ASDEX Upgrade team, the DIII-D team, the EAST team, the TCV team

Abstract: The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwa… ▽ More The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwald scaling - in its remarkable simplicity - may not capture the full complexity of the disruptive density limit. In this study, we assemble a multi-machine database to quantify the effectiveness of the Greenwald limit as a predictor of the L-mode density limit and identify alternative stability metrics. We find that a two-parameter dimensionless boundary in the plasma edge, $ν_{*\rm, edge}^{\rm limit} = 3.0 β_{T,{\rm edge}}^{-0.4}$, achieves significantly higher accuracy (true negative rate of 97.7% at a true positive rate of 95%) than the Greenwald limit (true negative rate 86.1% at a true positive rate of 95%) across a multi-machine dataset including metal- and carbon-wall tokamaks (AUG, C-Mod, DIII-D, and TCV). The collisionality boundary presented here can be applied for density limit avoidance in current devices and in ITER, where it can be measured and responded to in real time. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: 27 pages, 9 figures

In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection

Authors: Florian Effenberg, Shota Abe, Gregory Sinclair, Tyler Abrams, Alessandro Bortolon, William R. Wampler, Florian M. Laggner, Dmitry L. Rudakov, Igor Bykov, Charles J. Lasnier, David Mauzey, Alexander Nagy, Raffi Nazikian, Filippo Scotti, Huiqian Wang, Robert S. Wilcox, the DIII-D Team

Abstract: Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities… ▽ More Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from $3.9-7.5\times10^{19}$ m$^{-3}$ and input powers ranging from $5.5-9$ MW. The small Si pellets were delivered with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz corresponding to mass flow rates of $5-19$ mg/s ($1-4.2\times10^{20}$ Si/s) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system (DiMES) to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO$_2$ is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least $0.4-1.2$ nm thickness have been deposited at $0.4-0.7$ nm/s. The technique is estimated to coat a surface area of at least 0.94 m$^2$ on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation. △ Less

Submitted 9 August, 2023; v1 submitted 8 April, 2023; originally announced April 2023.

Comments: Florian Effenberg et al 2023 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/acee98

Journal ref: Nucl. Fusion 63 106004 (2023)

Mitigation of plasma-wall interactions with low-Z powders in DIII-D high confinement plasmas

Authors: Florian Effenberg, Alessandro Bortolon, Livia Casali, Raffi Nazikian, Igor Bykov, Filippo Scotti, Huiqian Q. Wang, Max E. Fenstermacher, Robert Lunsford, Alexander Nagy, Brian A. Grierson, Florian M. Laggner, Rajesh Maingi, the DIII-D Team

Abstract: Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-a… ▽ More Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-angle slot (SAS) divertor for 2-s intervals at constant rates of 3-204 mg/s. The multi-species BN powders at a rate of 54 mg/s showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy $W_{mhd}$ by 5%. Rates of 204 mg/s of boron nitride powder further reduce ELM-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an $n=2$ tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. The results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation. △ Less

Submitted 16 August, 2022; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: F. Effenberg et al 2022 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/ac899d

Journal ref: Nucl. Fusion 62 106015 (2022)

Deep convolutional neural networks for multi-scale time-series classification and application to disruption prediction in fusion devices

Authors: R. M. Churchill, the DIII-D team

Abstract: The multi-scale, mutli-physics nature of fusion plasmas makes predicting plasma events challenging. Recent advances in deep convolutional neural network architectures (CNN) utilizing dilated convolutions enable accurate predictions on sequences which have long-range, multi-scale characteristics, such as the time-series generated by diagnostic instruments observing fusion plasmas. Here we apply thi… ▽ More The multi-scale, mutli-physics nature of fusion plasmas makes predicting plasma events challenging. Recent advances in deep convolutional neural network architectures (CNN) utilizing dilated convolutions enable accurate predictions on sequences which have long-range, multi-scale characteristics, such as the time-series generated by diagnostic instruments observing fusion plasmas. Here we apply this neural network architecture to the popular problem of disruption prediction in fusion tokamaks, utilizing raw data from a single diagnostic, the Electron Cyclotron Emission imaging (ECEi) diagnostic from the DIII-D tokamak. ECEi measures a fundamental plasma quantity (electron temperature) with high temporal resolution over the entire plasma discharge, making it sensitive to a number of potential pre-disruptions markers with different temporal and spatial scales. Promising, initial disruption prediction results are obtained training a deep CNN with large receptive field (~30k), achieving an $F_1$-score of ~91% on individual time-slices using only the ECEi data. △ Less

Submitted 21 November, 2019; v1 submitted 31 October, 2019; originally announced November 2019.

Comments: Accepted at the Second Workshop on Machine Learning and the Physical Sciences (NeurIPS 2019), Vancouver, Canada

Gyrokinetic analysis and simulation of pedestals, to identify the culprits for energy losses using fingerprints

Authors: M. Kotschenreuther, X. Liu, D. R. Hatch, S. Mahajan, L. Zheng, A. Diallo, R. Groebner, the DIII-D TEAM, J. C. Hillesheim, C. F. Maggi, C. Giroud, F. Koechl, V. Parail, S. Saarelma, E. Solano, JET Contributors, A. Chankin

Abstract: Fusion performance in tokamaks hinges critically on the efficacy of the Edge Transport Barrier (ETB) at suppressing energy losses. The new concept of fingerprints is introduced to identify the instabilities that cause the transport losses in the ETB of many of today's experiments, from widely posited candidates. Analysis of the Gyrokinetic-Maxwell equations, and gyrokinetic simulations of experime… ▽ More Fusion performance in tokamaks hinges critically on the efficacy of the Edge Transport Barrier (ETB) at suppressing energy losses. The new concept of fingerprints is introduced to identify the instabilities that cause the transport losses in the ETB of many of today's experiments, from widely posited candidates. Analysis of the Gyrokinetic-Maxwell equations, and gyrokinetic simulations of experiments, find that each mode type produces characteristic ratios of transport in the various channels: density, heat and impurities. This, together with experimental observations of transport in some channel, or, of the relative size of the driving sources of channels, can identify or determine the dominant modes causing energy transport. In multiple ELMy H-mode cases that are examined, these fingerprints indicate that MHD-like modes are apparently not the dominant agent of energy transport; rather, this role is played by Micro-Tearing Modes (MTM) and Electron Temperature Gradient (ETG) modes, and in addition, possibly Ion Temperature Gradient (ITG)/Trapped Electron Modes (ITG/TEM) on JET. MHD-like modes may dominate the electron particle losses. Fluctuation frequency can also be an important means of identification, and is often closely related to the transport fingerprint. The analytical arguments unify and explain previously disparate experimental observations on multiple devices, including DIII-D, JET and ASDEX-U, and detailed simulations of two DIII-D ETBs also demonstrate and corroborate this. △ Less

Submitted 24 March, 2019; originally announced March 2019.

The abundance and thermal history of water ice in the disk surrounding HD142527 from the DIGIT Herschel Key Program

Authors: M. Min, J. Bouwman, C. Dominik, L. B. F. M. Waters, K. M. Pontoppidan, S. Hony, G. D. Mulders, Th. Henning, E. F. van Dishoeck, P. Woitke, Neal J. Evans II, The DIGIT Team

Abstract: The presence or absence of ice in protoplanetary disks is of great importance for the formation of planets. By enhancing the solid surface density and increasing the sticking efficiency, ice catalyzes the rapid formation of planetesimals and decreases the time scale for giant planet core accretion. Aims: In this paper we analyse the composition of the outer disk around the Herbig star HD~142527. W… ▽ More The presence or absence of ice in protoplanetary disks is of great importance for the formation of planets. By enhancing the solid surface density and increasing the sticking efficiency, ice catalyzes the rapid formation of planetesimals and decreases the time scale for giant planet core accretion. Aims: In this paper we analyse the composition of the outer disk around the Herbig star HD~142527. We focus on the composition of the water ice, but also analyse the abundances of previously proposed minerals. Methods: We present new Herschel far infrared spectra and a re-reduction of archival data from the Infrared Space Observatory (ISO). We model the disk using full 3D radiative transfer to obtain the disk structure. Also, we use an optically thin analysis of the outer disk spectrum to obtain firm constraints on the composition of the dust component. Results: The water ice in the disk around HD~142527 contains a large reservoir of crystalline water ice. We determine the local abundance of water ice in the outer disk (i.e. beyond 130\,AU). The re-reduced ISO spectrum differs significantly from that previously published, but matches the new Herschel spectrum at their common wavelength range. In particular, we do not detect any significant contribution from carbonates or hydrous silicates, in contrast to earlier claims. Conclusions: The amount of water ice detected in the outer disk requires $\sim80\,$\% of the oxygen atoms. This is comparable to the water ice abundance in the outer solar system, in comets and in dense interstellar clouds. The water ice is highly crystalline while the temperatures where we detect it are too low to crystallize the water on relevant time scales. We discuss the implications of this finding. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Comments: Accepted for publication in A&A

Statistical analysis of $m/n$ = 2/1 locked and quasi-stationary modes with rotating precursors at DIII-D

Authors: R. Sweeney, W. Choi, R. J. La Haye, S. Mao, K. E. J. Olofsson, F. A. Volpe, the DIII-D Team

Abstract: A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A para… ▽ More A database has been developed to study the evolution, the nonlinear effects on equilibria, and the disruptivity of locked and quasi-stationary modes with poloidal and toroidal mode numbers $m=2$ and $n=1$ at DIII-D. The analysis of 22,500 discharges shows that more than 18% of disruptions are due to locked or quasi-stationary modes with rotating precursors (not including born locked modes). A parameter formulated by the plasma internal inductance $l_i$ divided by the safety factor at 95% of the poloidal flux, $q_{95}$, is found to exhibit predictive capability over whether a locked mode will cause a disruption or not, and does so up to hundreds of milliseconds before the disruption. Within 20 ms of the disruption, the shortest distance between the island separatrix and the unperturbed last closed flux surface, referred to as $d_{edge}$, performs comparably to $l_i/q_{95}$ in its ability to discriminate disruptive locked modes. Out of all parameters considered, $d_{edge}$ also correlates best with the duration of the locked mode. Within 50 ms of a locked mode disruption, average behavior includes exponential growth of the $n=1$ perturbed field, which might be due to the 2/1 locked mode. Even assuming the aforementioned 2/1 growth, disruptivity following a locked mode shows little dependence on island width up to 20 ms before the disruption. Separately, greater deceleration of the rotating precursor is observed when the wall torque is large. At locking, modes are often observed to align with a residual error field. Timescales associated with the mode evolution are also studied and dictate the response times necessary for disruption avoidance and mitigation. △ Less

Submitted 28 November, 2016; v1 submitted 13 June, 2016; originally announced June 2016.

L1448-MM observations by the Herschel Key program, "Dust, Ice, and Gas In Time" (DIGIT)

Authors: **hee Lee, Jeong-Eun Lee, Seokho Lee, Joel. D. Green, Neal J. Evans II, Minho Choi, Lars Kristensen, Odysseas Dionatos, Jes K. Jørgensen, the DIGIT team

Abstract: We present Herschel/PACS observations of L1448-MM, a Class 0 protostar with a prominent outflow. Numerous emission lines are detected at 55 < lambda < 210 micrometer including CO, OH, H2O, and [O I]. We investigate the spatial distribution of each transition to find that lines from low energy levels tend to distribute along the outflow direction while lines from high energy levels peak at the cent… ▽ More We present Herschel/PACS observations of L1448-MM, a Class 0 protostar with a prominent outflow. Numerous emission lines are detected at 55 < lambda < 210 micrometer including CO, OH, H2O, and [O I]. We investigate the spatial distribution of each transition to find that lines from low energy levels tend to distribute along the outflow direction while lines from high energy levels peak at the central spatial pixel. Spatial maps reveal that OH emission lines are formed in a relatively small area, while [O I] emission is extended. According to the rotational diagram analysis, the CO emission can be fitted by two (warm and hot) temperature components. For H2O, the ortho-to-para ratio is close to 3. The non-LTE LVG calculations suggest that CO and H2O lines could instead be formed in a high kinetic temperature (T > 1000 K) environment, indicative of a shock origin. For OH, IR-pum** processes play an important role in the level population. The molecular emission in L1448-MM is better explained with a C-shock model, but the atomic emission of PACS [O I] and Spitzer/IRS [Si II] emission is not consistent with C-shocks, suggesting multiple shocks in this region. Water is the major line coolant of L1448-MM in the PACS wavelength range, and the best-fit LVG models predict that H2O and CO emit (50-80)% of their line luminosity in the PACS wavelength range. △ Less

Submitted 9 September, 2013; originally announced September 2013.

Comments: 66 pages, 25 figures, accepted for publication in ApJS

DIGIT survey of far-infrared lines from protoplanetary discs: II. CO

Authors: Gwendolyn Meeus, Colette Salyk, Simon Bruderer, Davide Fedele, Koen Maaskant, Neal J. Evans II, Ewine F. van Dishoeck, Benjamin Montesinos, Greg Herczeg, Jeroen Bouwman, Joel D. Green, Carsten Dominik, Thomas Henning, Silvia Vicente, the DIGIT team

Abstract: CO is an important component of a protoplanetary disc as it is one of the most abundant gas phase species. Furthermore, observations of the CO transitions can be used as a diagnostic of the gas, tracing conditions in both the inner and outer disc. We present Herschel/PACS spectroscopy of a sample of 22 Herbig Ae/Be (HAEBEs) and 8 T Tauri stars (TTS), covering the pure rotational CO transitions fro… ▽ More CO is an important component of a protoplanetary disc as it is one of the most abundant gas phase species. Furthermore, observations of the CO transitions can be used as a diagnostic of the gas, tracing conditions in both the inner and outer disc. We present Herschel/PACS spectroscopy of a sample of 22 Herbig Ae/Be (HAEBEs) and 8 T Tauri stars (TTS), covering the pure rotational CO transitions from J = 14-13 up to J = 49-48. CO is detected in only 5 HAEBEs, AB Aur, HD 36112, HD 97048, HD 100546 and IRS 48, and in 4 TTS, AS 205, S CrA, RU Lup, and DG Tau. The highest transition seen is J = 36-35, with Eup of 3669 K, detected in HD 100546 and DG Tau. We construct rotational diagrams for the discs with at least 3 CO detections to derive Trot, and find average temperatures of 270 K for the HAEBEs and 485 K for the TTS. HD 100546 requires an extra temperature component with Trot ~ 900-1000 K, suggesting a range of temperatures in its disc atmosphere, consistent with thermo-chemical disc models. In HAEBEs, the objects with CO detections all have flared discs in which the gas and dust are thermally decoupled. We use a small model grid to analyse our observations and find that an increased amount of flaring means higher line flux, as it increases the mass in warm gas. CO is not detected in our flat discs as the emission is below the detection limit. We find that HAEBE sources with CO detections have high Luv and strong PAH emission, again connected to the heating of the gas. In TTS, the objects with CO detections are all sources with evidence for a disc wind or outflow. For both groups of objects, sources with CO detections generally have high UV luminosity (either stellar in HAEBEs or due to accretion in TTS), but this is not a sufficient condition for the detection of the far-IR CO lines. △ Less

Submitted 22 August, 2013; v1 submitted 19 August, 2013; originally announced August 2013.

Comments: Accepted by A&A

The 69 micron forsterite band in spectra of protoplanetary disks - Results from the Herschel DIGIT programme

Authors: B. Sturm, J. Bouwman, Th. Henning, N. J. Evans II, L. B. F. M. Waters, E. F. van Dishoeck, J. D. Green, J. Olofsson, G. Meeus, K. Maaskant, C. Dominik, J. C. Augereau, G. D. Mulders, B. Acke, B. Merin, G. J. Herczeg, The DIGIT team

Abstract: Context: We have analysed Herschel-PACS spectra of 32 circumstellar disks around Herbig Ae/Be and T-Tauri stars obtained within the Herschel key programme DIGIT. In this paper we focus on the 69mu emission band of the crystalline silicate forsterite. Aims: This work provides an overview of the 69mu forsterite bands in the DIGIT sample. We aim to derive the temperature and composition of the fors… ▽ More Context: We have analysed Herschel-PACS spectra of 32 circumstellar disks around Herbig Ae/Be and T-Tauri stars obtained within the Herschel key programme DIGIT. In this paper we focus on the 69mu emission band of the crystalline silicate forsterite. Aims: This work provides an overview of the 69mu forsterite bands in the DIGIT sample. We aim to derive the temperature and composition of the forsterite grains. With this information, constraints can be placed on the spatial distribution of the forsterite in the disk and its formation history. Methods: Position and shape of the 69mu band are used to derive the temperature and composition of the dust by comparison to laboratory spectra of that band. We combine our data with existing Spitzer IRS spectra to compare the presence and strength of the 69mu band to the forsterite bands at shorter wavelengths. Results: A total of 32 sources have been observed, 8 of them show a 69mu emission band that can be attributed to forsterite. With the exception of the T-Tauri star AS205, all of the detections are for disks associated with Herbig Ae/Be stars. Most of the forsterite grains that give rise to the 69mu bands are warm (~100-200 K) and iron-poor (less than ~2% iron). Only AB-Aur requires approximately 3-4% of iron. Conclusions: Our findings support the hypothesis that the forsterite grains form through an equilibrium condensation process at high temperatures. The connection between the strength of the 69 and 33mu bands shows that at least part of the emission in these bands originates from the same dust grains. Further, any model that explains the PACS and the Spitzer IRS observations must take the effects of a wavelength dependent optical depth into account. We find indications of a correlation of the detection rate of the 69mu band with the spectral type of the host stars. However, our sample is too small to obtain a definitive result. △ Less

Submitted 15 March, 2013; originally announced March 2013.

Comments: accepted for publication in A&A

Deciphering Spectral Fingerprints of Habitable Extrasolar Planets

Authors: L. Kaltenegger, F. Selsis, M. Fridlund, H. Lammer, the Darwin Science team

Abstract: In this paper we discuss how we can read a planets spectrum to assess its habitability and search for the signatures of a biosphere. After a decade rich in giant exoplanet detections, observation techniques have now reached the ability to find planets of less than 10 MEarth (so called Super-Earths) that may potentially be habitable. How can we characterize those planets and assess if they are ha… ▽ More In this paper we discuss how we can read a planets spectrum to assess its habitability and search for the signatures of a biosphere. After a decade rich in giant exoplanet detections, observation techniques have now reached the ability to find planets of less than 10 MEarth (so called Super-Earths) that may potentially be habitable. How can we characterize those planets and assess if they are habitable? The new field of extrasolar planet search has shown an extraordinary ability to combine research by astrophysics, chemistry, biology and geophysics into a new and exciting interdisciplinary approach to understand our place in the universe. The results of a first generation mission will most likely result in an amazing scope of diverse planets that will set planet formation, evolution as well as our planet in an overall context. △ Less

Submitted 2 March, 2010; v1 submitted 12 June, 2009; originally announced June 2009.

Comments: 17 pages, 10 figures, Astrobiology, 10, 1, 2010

Stellar Aspects of Habitability: Characterizing Target Stars for Terrestrial Planet Search Missions

Authors: L. Kaltenegger, C. Eiroa, I. Ribas, F. Paresce, M. Leitzinger, P. Odert, A. Hanslmeier, M. Fridlund, H. Lammer, the Darwin team

Abstract: In this paper we present and discuss the criteria for selecting potential target stars suitable for the search for Earth like planets, with a special emphasis on the stellar aspects of habitability. Missions that search for terrestrial exoplanets will explore the presence and habitability of Earth-like exoplanets around several hundred nearby stars, mainly F, G, K, and M stars. The evaluation of… ▽ More In this paper we present and discuss the criteria for selecting potential target stars suitable for the search for Earth like planets, with a special emphasis on the stellar aspects of habitability. Missions that search for terrestrial exoplanets will explore the presence and habitability of Earth-like exoplanets around several hundred nearby stars, mainly F, G, K, and M stars. The evaluation of the list of potential target systems in order to develop mission concepts for a search for Terrestrial Exoplanets is essential. Using the Darwin All Sky Star Catalogue (DASSC), we discuss the selection criteria, configuration dependent sub-catalogues and the implication of stellar activity for habitability. △ Less

Submitted 2 March, 2010; v1 submitted 1 June, 2009; originally announced June 2009.

Comments: 14 pages, 4 figures, Astrobiology, 10, 1,2010

Shear-selected clusters from the Deep Lens Survey

Authors: V. E. Margoniner, the Deep Lens Survey Team

Abstract: Weak gravitational lensing has the potential to select clusters independently of their baryon content, dynamical state, and star formation history. We present steps toward the first shear-selected sample of clusters, from the Deep Lens Survey (DLS), a deep BVRz' imaging survey of 28 square degrees. Cluster redshifts are determined from photometric redshifts of members and from lensing tomography… ▽ More Weak gravitational lensing has the potential to select clusters independently of their baryon content, dynamical state, and star formation history. We present steps toward the first shear-selected sample of clusters, from the Deep Lens Survey (DLS), a deep BVRz' imaging survey of 28 square degrees. Cluster redshifts are determined from photometric redshifts of members and from lensing tomography, and in some cases have been confirmed spectroscopically. DLS imaging data are also used to derive mass-to-light ratios, and upcoming Chandra and XMM time will yield X-ray luminosities and temperatures for a subsample of 12 clusters. Thus we can begin to address any baryon or luminous-matter bias which may be present in current optical and X-ray samples. When the DLS is complete, we expect to have a sample of ~ 100 shear-selected clusters from z ~ 0.2-1. △ Less

Submitted 17 March, 2003; originally announced March 2003.

Comments: 10 pages LaTeX, 16 figures, talk paper for Clusters of Galaxies: Probes of Cosmological Structure and Galaxy Evolution, Carnegie Observatories Symposium III.

Ground-Based Optical Deep Pencil Beam Surveys

Authors: P. C. Boeshaar, V. E. Margoniner, the Deep Lens Survey Team

Abstract: The initial results of the Deep Lens Survey (http://dls.bell-labs.com) to identify possible brown dwarfs and extremely metal poor red halo subdwarfs near the hydrogen burning limit are presented. Individual deep CCD high galactic latitude survey fields appear to offer a low probability of discovering field BD's, but taken collectively offer an opportunity to begin addressing questions regarding… ▽ More The initial results of the Deep Lens Survey (http://dls.bell-labs.com) to identify possible brown dwarfs and extremely metal poor red halo subdwarfs near the hydrogen burning limit are presented. Individual deep CCD high galactic latitude survey fields appear to offer a low probability of discovering field BD's, but taken collectively offer an opportunity to begin addressing questions regarding the scale height and distribution of these objects. In all likelihood, the very depth of such surveys will greatly increase our knowledge of the coolest extreme halo objects, which currently are known in far fewer numbers than T dwarfs. Ultimately, the large volume surveyed by the Large Synoptic Survey Telescope will identify vast numbers of such objects, providing a more complete picture of their spatial distribution. △ Less

Submitted 9 August, 2002; originally announced August 2002.

Comments: 8 pages including 4 figures; to appear in "Proceedings of IAU 211: Brown Dwarfs", E.L. Martin Ed., ASP Conference Series