Showing 1–8 of 8 results for author: Tarte, E J

Normal state properties of high angle grain boundaries in (Y,Ca)Ba2Cu3O7-delta

Authors: S. H. Mennema, J. H. T. Ransley, G. Burnell, J. L. MacManus-Driscoll, E. J. Tarte, M. G. Blamire

Abstract: By lithographically fabricating an optimised Wheatstone bridge geometry, we have been able to make accurate measurements of the resistance of grain boundaries in Y1-xCaxBa2Cu3O7-d between the superconducting transition temperature, Tc, and room temperature. Below Tc the normal state properties were assessed by applying sufficiently high currents. The behaviour of the grain boundary resistance ve… ▽ More By lithographically fabricating an optimised Wheatstone bridge geometry, we have been able to make accurate measurements of the resistance of grain boundaries in Y1-xCaxBa2Cu3O7-d between the superconducting transition temperature, Tc, and room temperature. Below Tc the normal state properties were assessed by applying sufficiently high currents. The behaviour of the grain boundary resistance versus temperature and of the conductance versus voltage are discussed in the framework charge transport through a tunnel barrier. The influence of misorientation angle, oxygen content, and calcium do** on the normal state properties is related to changes of the height and shape of the grain boundary potential barrier. △ Less

Submitted 31 August, 2004; originally announced September 2004.

Comments: 17 pages, 1 table, 5 figures, submitted to PRB

The Normal State Resistivity of Grain Boundaries in YBa2Cu3O7-delta

Authors: J. H. T. Ransley, S. H. Mennema, K. G. Sandeman, G. Burnell, J. I. Kye, B. Oh, E. J. Tarte, J. E. Evetts, M. G. Blamire

Abstract: Using an optimized bridge geometry we have been able to make accurate measurements of the properties of YBa2Cu3O7-delta grain boundaries above Tc. The results show a strong dependence of the change of resistance with temperature on grain boundary angle. Analysis of our results in the context of band-bending allows us to estimate the height of the potential barrier present at the grain boundary i… ▽ More Using an optimized bridge geometry we have been able to make accurate measurements of the properties of YBa2Cu3O7-delta grain boundaries above Tc. The results show a strong dependence of the change of resistance with temperature on grain boundary angle. Analysis of our results in the context of band-bending allows us to estimate the height of the potential barrier present at the grain boundary interface. △ Less

Submitted 17 November, 2003; originally announced November 2003.

Comments: 11 pages, 3 figures

Journal ref: Applied Physics Letters, 84, 4089 (2004).

Direct Observation of a Temperature Dependent 0-pi Junction Transition in a Mesoscopic High Critical Temperature Grain Boundary Junction

Authors: G. Testa, A. Monaco, E. Esposito, E. Sarnelli, D. -J. Kang, E. J. Tarte, S. H. Mennema, M. G. Blamire

Abstract: We have observed, for the first time, a temperature dependent 0-pi junction crossover in a 45 symmetric [001] tilt grain boundary junction. Experimental data, obtained by a double phase-sensitive test based on a low inductance dc SQUID, show an anomalous nonmonotonic temperature dependence of the Josephson current, clear evidence of a critical current sign change at a temperature T*. At the same… ▽ More We have observed, for the first time, a temperature dependent 0-pi junction crossover in a 45 symmetric [001] tilt grain boundary junction. Experimental data, obtained by a double phase-sensitive test based on a low inductance dc SQUID, show an anomalous nonmonotonic temperature dependence of the Josephson current, clear evidence of a critical current sign change at a temperature T*. At the same temperature, the SQUID undergoes a transition from a 0-SQUID to a pi-SQUID. Results are in good agreement with theoretical models taking into account mid-gap states in low transparency junctions. △ Less

Submitted 12 November, 2003; v1 submitted 30 October, 2003; originally announced October 2003.

Comments: 5 pages, 2 columns, 4 PS or EPS figures, Tex file, minor changes made

Controllable Josephson current through a pseudo-spin-valve structure

Authors: C. Bell, G. Burnell, C. W. Leung, E. J. Tarte, D. -J. Kang, M. G. Blamire

Abstract: A thin Co/Cu/Permalloy (Ni$_{80}$Fe$_{20}$) pseudo-spin-valve structure is sandwiched between superconducting Nb contacts. When the current is passed perpendicular to the plane of the film a Josephson critical current ($I_C$) is observed at 4.2 K, in addition to a magnetoresistance (MR) of $\sim$ 0.5 % at high bias. The hysteresis loop of the spin-valve structure can be cycled to modulate the ze… ▽ More A thin Co/Cu/Permalloy (Ni$_{80}$Fe$_{20}$) pseudo-spin-valve structure is sandwiched between superconducting Nb contacts. When the current is passed perpendicular to the plane of the film a Josephson critical current ($I_C$) is observed at 4.2 K, in addition to a magnetoresistance (MR) of $\sim$ 0.5 % at high bias. The hysteresis loop of the spin-valve structure can be cycled to modulate the zero field $I_C$ of the junction in line with the MR measurements. These modulations of resistance and $I_C$ occur both smoothly and sharply with the applied field. For each type of behaviour there is a strong correlation between shape of the MR loops and the $I_C$ modulation. △ Less

Submitted 18 September, 2003; originally announced September 2003.

Comments: 3 pages, 4 figures, (submitted to Appl. Phys. Lett.)

Proximity and Josephson effects in superconductor - antiferromagnetic Nb / γ-Fe50Mn50 heterostructures

Authors: C. Bell, E. J. Tarte, G. Burnell, C. W. Leung, D. -J. Kang, M. G. Blamire

Abstract: We study the proximity effect in superconductor (S), antiferromagnetic (AF) bilayers, and report the fabrication and measurement of the first trilayer S/AF/S Josephson junctions. The disordered f.c.c. alloy γ-Fe50Mn50 was used as the AF, and the S is Nb. Micron and sub-micron scale junctions were measured, and the scaling of $J_C (d_AF)$ gives a coherence length in the AF of 2.4 nm, which correl… ▽ More We study the proximity effect in superconductor (S), antiferromagnetic (AF) bilayers, and report the fabrication and measurement of the first trilayer S/AF/S Josephson junctions. The disordered f.c.c. alloy γ-Fe50Mn50 was used as the AF, and the S is Nb. Micron and sub-micron scale junctions were measured, and the scaling of $J_C (d_AF)$ gives a coherence length in the AF of 2.4 nm, which correlates with the coherence length due to suppression of $T_C$ in the bilayer samples. The diffusion constant for FeMn was found to be 1.7 \times 10$^{-4}$ m$^2$ s$^-1$, and the density of states at the Fermi level was also obtained. An exchange biased FeMn/Co bilayer confirms the AF nature of the FeMn in this thickness regime. △ Less

Submitted 12 September, 2003; originally announced September 2003.

Comments: 6 pages, 5 figures, accepted for Phys. Rev. B

Josephson effects in MgB2 meta masked ion damage junctions

Authors: D. -J. Kang, N. H. Peng, R. Webb, C. Jeynes, J. H. Yun, S. H. Moon, D. Oh, G. Burnell, E. J. Tarte, D. F. Moore, M. G. Blamire

Abstract: Ion beam damage combined with nanoscale focused ion beam direct milling was used to create manufacturable SNS type Josephson junctions in 100 nm thick MgB$_{2}$ with T$_{C}$ of 38 K. The junctions show non-hysteretic current - voltage characteristics between 36 and 4.2 K. Experimental evidence for the dc and ac Josephson effects in MgB$_{2}$ metal masked ion damage junctions are presented. This… ▽ More Ion beam damage combined with nanoscale focused ion beam direct milling was used to create manufacturable SNS type Josephson junctions in 100 nm thick MgB$_{2}$ with T$_{C}$ of 38 K. The junctions show non-hysteretic current - voltage characteristics between 36 and 4.2 K. Experimental evidence for the dc and ac Josephson effects in MgB$_{2}$ metal masked ion damage junctions are presented. This technique is particularly useful for prototy** devices due to its simplicity and flexibility of fabrication and has a great potential for high-density integration. △ Less

Submitted 12 June, 2002; originally announced June 2002.

Comments: 12 pages, 4 figures, RevTeX4, submitted to APL

A Directly Coupled Superconducting Quantum Interference Device Magnetometer Fabricated in Magnesium Diboride by Focused Ion Beam

Authors: G. Burnell, D. -J. Kang, D. A. Ansell, H. -N. Lee, S. -H. Moon, E. J. Tarte, M. G. Blamire

Abstract: We report the fabrication of a directly coupled superconducting quantum interference device (SQUID) magnetometer in MgB2 using a focused ion beam (FIB) to create Josephson junctions in a 70 nm thick film of MgB2. The SQUID shows a voltage modulation (deltaV) of 175 mV at a temperature of 10 K and operates over a temperature range from 10 K to 24 K. We find excellent agreement between the measure… ▽ More We report the fabrication of a directly coupled superconducting quantum interference device (SQUID) magnetometer in MgB2 using a focused ion beam (FIB) to create Josephson junctions in a 70 nm thick film of MgB2. The SQUID shows a voltage modulation (deltaV) of 175 mV at a temperature of 10 K and operates over a temperature range from 10 K to 24 K. We find excellent agreement between the measured maximum transfer functions and those predicted by theory. We have measured the magnetic flux noise at 20 K to be as low as 14 micro Phi-0 per root Hz. △ Less

Submitted 26 March, 2002; originally announced March 2002.

Comments: 11 pages, 4 figures

Vortex Channeling and the V-I Characteristic of YBa2Cu3O7 Low Angle Grain Boundaries

Authors: M. J. Hogg, F. Kahlmann, E. J. Tarte, Z. H. Barber, J. E. Evetts

Abstract: We have performed V-I measurements on a thin film YBa2Cu3O7 4^o [001] tilt low angle grain boundary over an extensive range of temperature and field, verifying the presence of a linear characteristic. We report on the occurrence of the linear characteristic in its basic form and on the observation of V-I kinking into several, and in some cases numerous, linear segments. We interpret these findin… ▽ More We have performed V-I measurements on a thin film YBa2Cu3O7 4^o [001] tilt low angle grain boundary over an extensive range of temperature and field, verifying the presence of a linear characteristic. We report on the occurrence of the linear characteristic in its basic form and on the observation of V-I kinking into several, and in some cases numerous, linear segments. We interpret these findings in terms of a variation in the dissipative width at the grain boundary. Kinking from one linear V-I section to another of different gradient is described in terms of a change in the number of vortex rows being viscously channeled along the boundary. △ Less

Submitted 19 January, 2001; originally announced January 2001.

Comments: 14 pages including 4 figures. To be published in Applied Physics Letters