-
Detection of Interstellar $E$-1-cyano-1,3-butadiene in GOTHAM Observations of TMC-1
Authors:
Ilsa R. Cooke,
Ci Xue,
P. Bryan Changala,
Hannah Toru Shay,
Alex N. Byrne,
Qi Yu Tang,
Zachary T. P. Fried,
Kin Long Kelvin Lee,
Ryan A. Loomis,
Thanja Lamberts,
Anthony Remijan,
Andrew M. Burkhardt,
Eric Herbst,
Michael C. McCarthy,
Brett A. McGuire
Abstract:
We report the detection of the lowest energy conformer of $E$-1-cyano-1,3-butadiene ($E$-1-C$_4$H$_5$CN), a linear isomer of pyridine, using the fourth data reduction of the GOTHAM deep spectral survey toward TMC-1 with the 100 m Green Bank Telescope. We performed velocity stacking and matched filter analyses using Markov chain Monte Carlo simulations and find evidence for the presence of this mol…
▽ More
We report the detection of the lowest energy conformer of $E$-1-cyano-1,3-butadiene ($E$-1-C$_4$H$_5$CN), a linear isomer of pyridine, using the fourth data reduction of the GOTHAM deep spectral survey toward TMC-1 with the 100 m Green Bank Telescope. We performed velocity stacking and matched filter analyses using Markov chain Monte Carlo simulations and find evidence for the presence of this molecule at the 5.1$σ$ level. We derive a total column density of $3.8^{+1.0}_{-0.9}\times 10^{10}$ cm$^{-2}$, which is predominantly found toward two of the four velocity components we observe toward TMC-1. We use this molecule as a proxy for constraining the gas-phase abundance of the apolar hydrocarbon 1,3-butadiene. Based on the three-phase astrochemical modeling code NAUTILUS and an expanded chemical network, our model underestimates the abundance of cyano-1,3-butadiene by a factor of 19, with a peak column density of $2.34 \times 10^{10}\ \mathrm{cm}^{-2}$ for 1,3-butadiene. Compared to the modeling results obtained in previous GOTHAM analyses, the abundance of 1,3-butadiene is increased by about two orders of magnitude. Despite this increase, the modeled abundances of aromatic species do not appear to change and remain underestimated by 1--4 orders of magnitude. Meanwhile, the abundances of the five-membered ring molecules increase proportionally with 1,3-butadiene by two orders of magnitudes. We discuss implications for bottom-up formation routes to aromatic and polycyclic aromatic molecules.
△ Less
Submitted 21 March, 2023;
originally announced March 2023.
-
LEKID sensitivity for space applications between 80 and 600 GHz
Authors:
A. Catalano,
A. Bideaud,
O. Bourrion,
M. Calvo,
A. Fasano,
J. Goupy,
F. Levy-Bertrand,
J. F. Macìas-Pérez,
N. Ponthieu,
Q. Y. Tang,
A. Monfardini
Abstract:
We report the design, fabrication and testing of Lumped Element Kinetic Inductance Detectors (LEKID) showing performance in line with the requirements of the next generation space telescopes operating in the spectral range from 80 to 600 GHz. This range is of particular interest for Cosmic Microwave Background (CMB) studies. For this purpose we have designed and fabricated 100-pixel arrays coverin…
▽ More
We report the design, fabrication and testing of Lumped Element Kinetic Inductance Detectors (LEKID) showing performance in line with the requirements of the next generation space telescopes operating in the spectral range from 80 to 600 GHz. This range is of particular interest for Cosmic Microwave Background (CMB) studies. For this purpose we have designed and fabricated 100-pixel arrays covering five distinct bands. These wafers have been measured via multiplexing, where a full array is read out using a single pair of lines. We adopted a custom cold black-body installed in front of the detectors and regulated at temperatures between 1 K and 20 K. We will describe in the present paper the main design considerations, the fabrication processes, the testing and the data analysis.
△ Less
Submitted 26 June, 2020;
originally announced June 2020.
-
Atomic Layer Deposition Niobium Nitride Films for High-Q Resonators
Authors:
Calder Sheagren,
Peter Barry,
Erik Shirokoff,
Qing Yang Tang
Abstract:
Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission lines. When deposited, NbN is usually sputtered, leaving room for concern about uniformity at small thicknesses. We present atomic layer deposition niobium nitrid…
▽ More
Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission lines. When deposited, NbN is usually sputtered, leaving room for concern about uniformity at small thicknesses. We present atomic layer deposition niobium nitride (ALD NbN) as an alternative technique that allows for precision control of deposition parameters such as film thickness, stage temperature, and nitrogen flow. Atomic-scale control over film thickness admits wafer-scale uniformity for films 4-30 nm thick; control over deposition temperature gives rise to growth rate changes, which can be used to optimize film thickness and critical temperature. In order to characterize ALD NbN in the radio-frequency regime, we construct single-layer microwave resonators and test their performance as a function of stage temperature and input power. ALD processes can admit high resonator quality factors, which in turn increase detector multiplexing capabilities. We present measurements of the critical temperature and internal quality factor of ALD NbN resonators under the variation of ALD parameters.
△ Less
Submitted 18 December, 2019; v1 submitted 19 August, 2019;
originally announced August 2019.
-
Design and Bolometer Characterization of the SPT-3G First-year Focal Plane
Authors:
W. Everett,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. E. Austermann,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
E. V. Denison,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
A. Foster,
R. N. Gannon,
A. Gilbert,
J. C. Groh,
N. W. Halverson
, et al. (51 additional authors not shown)
Abstract:
During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization…
▽ More
During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Reducing the susceptibility of lumped-element KIDs to two-level system effects
Authors:
A. L. Hornsby,
P. S. Barry,
S. M. Doyle,
Q. Y. Tang,
E. Shirokoff
Abstract:
Arrays of lumped-element kinetic inductance detectors (LEKIDs) optically coupled through an antenna-coupled transmission line are a promising candidate for future cosmic microwave background (CMB) experiments. However, the dielectric materials used for the microstrip architecture are known to degrade the performance of superconducting resonators. In this paper, we investigate the feasibility of mi…
▽ More
Arrays of lumped-element kinetic inductance detectors (LEKIDs) optically coupled through an antenna-coupled transmission line are a promising candidate for future cosmic microwave background (CMB) experiments. However, the dielectric materials used for the microstrip architecture are known to degrade the performance of superconducting resonators. In this paper, we investigate the feasibility of microstrip coupling to a LEKID, focusing on a systematic study of the effect of depositing amorphous silicon-nitride on a LEKID. The discrete and spatially-separated inductive and capacitive regions of the LEKID allow us to vary the degree of dielectric coverage and determine the limitations of the microstrip coupling architecture. We show that by careful removal of dielectric from regions of high electric field in the capacitor, there is minimal degradation in dielectric loss tangent of a partially covered lumped-element resonator. We present the effects on the resonant frequency and noise power spectral density and, using the dark responsivity, provide an estimate for the resulting detector sensitivity.
△ Less
Submitted 6 August, 2020; v1 submitted 24 January, 2018;
originally announced January 2018.
-
Design and performance of the antenna coupled lumped-element kinetic inductance detector
Authors:
P. S. Barry,
S. Doyle,
A. L. Hornsby,
A. Kofman,
E. Mayer,
Q. Y. Tang,
J. Vieira,
E. Shirokoff
Abstract:
Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to the current stage 3 instruments. Arrays of kinetic inductance detectors…
▽ More
Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to the current stage 3 instruments. Arrays of kinetic inductance detectors (KIDs) provide a possible path to realising such large format arrays owing to their intrinsic multiplexing advantage and relative cryogenic simplicity. In this proceedings, we report on the design of a novel variant of the traditional KID design; the antenna-coupled lumped-element KID. A polarisation sensitive twin-slot antenna placed behind an optimised hemispherical lens couples power onto a thin-film superconducting microstrip line. The power is then guided into the inductive section of an aluminium KID where it is absorbed and modifies both the resonant frequency and quality factor of the KID. We present the various aspects of the design and preliminary results from the first set of seven-element prototype arrays and compare to the expected modelled performance.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Simulating Cosmic Microwave Background anisotropy measurements for Microwave Kinetic Inductance Devices
Authors:
Ritoban Basu Thakur,
Jason Henning,
Peter Stuart Barry,
Erik Shirokoff,
Qing Yang Tang
Abstract:
Microwave Kinetic Inductance Devices (MKIDs) are poised to allow for massively and natively multiplexed photon detectors arrays and are a natural choice for the next-generation CMB-Stage 4 experiment which will require 105 detectors. In this proceed- ing we discuss what noise performance of present generation MKIDs implies for CMB measurements. We consider MKID noise spectra and simulate a telesco…
▽ More
Microwave Kinetic Inductance Devices (MKIDs) are poised to allow for massively and natively multiplexed photon detectors arrays and are a natural choice for the next-generation CMB-Stage 4 experiment which will require 105 detectors. In this proceed- ing we discuss what noise performance of present generation MKIDs implies for CMB measurements. We consider MKID noise spectra and simulate a telescope scan strategy which projects the detector noise onto the CMB sky. We then analyze the simulated CMB + MKID noise to understand particularly low frequency noise affects the various features of the CMB, and thusly set up a framework connecting MKID characteristics with scan strategies, to the type of CMB signals we may probe with such detectors.
△ Less
Submitted 3 November, 2017;
originally announced November 2017.
-
Fabrication of antenna-coupled KID array for Cosmic Microwave Background detection
Authors:
Q. Y. Tang,
P. S. Barry,
R. Basu Thakur,
A. Kofman,
J. Vieira,
E. Shirokoff
Abstract:
Kinetic Inductance Detectors (KIDs) have become an attractive alternative to traditional bolometers in the sub-mm and mm observing community due to their innate frequency multiplexing capabilities and simple lithographic processes. These advantages make KIDs a viable option for the $O(500,000)$ detectors needed for the upcoming Cosmic Microwave Background - Stage 4 (CMB-S4) experiment. We have fab…
▽ More
Kinetic Inductance Detectors (KIDs) have become an attractive alternative to traditional bolometers in the sub-mm and mm observing community due to their innate frequency multiplexing capabilities and simple lithographic processes. These advantages make KIDs a viable option for the $O(500,000)$ detectors needed for the upcoming Cosmic Microwave Background - Stage 4 (CMB-S4) experiment. We have fabricated antenna-coupled MKID array in the 150GHz band optimized for CMB detection. Our design uses a twin slot antenna coupled to inverted microstrip made from a superconducting Nb/Al bilayer and SiN$_x$, which is then coupled to an Al KID grown on high resistivity Si. We present the fabrication process and measurements of SiN$_x$ microstrip resonators.
△ Less
Submitted 30 October, 2017;
originally announced October 2017.
-
ICE: a scalable, low-cost FPGA-based telescope signal processing and networking system
Authors:
K. Bandura,
A. N. Bender,
J. F. Cliche,
T. de Haan,
M. A. Dobbs,
A. J. Gilbert,
S. Griffin,
G. Hsyu,
D. Ittah,
J. Mena Parra,
J. Montgomery,
T. Pinsonneault-Marotte,
S. Siegel,
G. Smecher,
Q. Y. Tang,
K. Vanderlinde,
N. Whitehorn
Abstract:
We present an overview of the 'ICE' hardware and software framework that implements large arrays of interconnected FPGA-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to radio, millimeter and sub-millimeter telescope readout systems that have requirements beyond typical off-the-shelf processing systems, such as careful control…
▽ More
We present an overview of the 'ICE' hardware and software framework that implements large arrays of interconnected FPGA-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to radio, millimeter and sub-millimeter telescope readout systems that have requirements beyond typical off-the-shelf processing systems, such as careful control of interference signals produced by the digital electronics, and clocking of all elements in the system from a single precise observatory-derived oscillator. A new generation of telescopes operating at these frequency bands and designed with a vastly increased emphasis on digital signal processing to support their detector multiplexing technology or high-bandwidth correlators---data rates exceeding a terabyte per second---are becoming common. The ICE system is built around a custom FPGA motherboard that makes use of an Xilinx Kintex-7 FPGA and ARM-based co-processor. The system is specialized for specific applications through software, firmware, and custom mezzanine daughter boards that interface to the FPGA through the industry-standard FMC specifications. For high density applications, the motherboards are packaged in 16-slot crates with ICE backplanes that implement a low-cost passive full-mesh network between the motherboards in a crate, allow high bandwidth interconnection between crates, and enable data offload to a computer cluster. A Python-based control software library automatically detects and operates the hardware in the array. Examples of specific telescope applications of the ICE framework are presented, namely the frequency-multiplexed bolometer readout systems used for the SPT and Simons Array and the digitizer, F-engine, and networking engine for the CHIME and HIRAX radio interferometers.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
A Radio-Frequency-over-Fiber link for large-array radio astronomy applications
Authors:
Juan Mena,
Kevin Bandura,
Jean-Francois Cliche,
Matt Dobbs,
Adam Gilbert,
Qing Yang Tang
Abstract:
A prototype 425-850 MHz Radio-Frequency-over-Fiber (RFoF) link for the Canadian Hydrogen Intensity Map** Experiment (CHIME) is presented. The design is based on a directly modulated Fabry-Perot (FP) laser, operating at ambient temperature, and a single-mode fiber. The dynamic performance, gain stability, and phase stability of the RFoF link are characterized. Tests on a two-element interferomete…
▽ More
A prototype 425-850 MHz Radio-Frequency-over-Fiber (RFoF) link for the Canadian Hydrogen Intensity Map** Experiment (CHIME) is presented. The design is based on a directly modulated Fabry-Perot (FP) laser, operating at ambient temperature, and a single-mode fiber. The dynamic performance, gain stability, and phase stability of the RFoF link are characterized. Tests on a two-element interferometer built at the Dominion Radio Astrophysical Observatory for CHIME prototy** demonstrate that RFoF can be successfully used as a cost-effective solution for analog signal transport on the CHIME telescope and other large-array radio astronomy applications
△ Less
Submitted 2 October, 2013; v1 submitted 25 August, 2013;
originally announced August 2013.
