-
Unveiling the Pockels Coefficient of Ferroelectric Nitride ScAlN
Authors:
Guangcanlan Yang,
Haochen Wang,
Sai Mu,
Hao Xie,
Tyler Wang,
Chengxing He,
Mohan Shen,
Mengxia Liu,
Chris G. Van de Walle,
Hong X. Tang
Abstract:
Nitride ferroelectrics have recently emerged as promising alternatives to oxide ferroelectrics due to their compatibility with mainstream semiconductor processing. ScAlN, in particular, has exhibited remarkable piezoelectric coupling strength ($K^2$) comparable to that of lithium niobate (LN), making it a valuable choice for RF filters in wireless communications. Recently, ScAlN has sparked intere…
▽ More
Nitride ferroelectrics have recently emerged as promising alternatives to oxide ferroelectrics due to their compatibility with mainstream semiconductor processing. ScAlN, in particular, has exhibited remarkable piezoelectric coupling strength ($K^2$) comparable to that of lithium niobate (LN), making it a valuable choice for RF filters in wireless communications. Recently, ScAlN has sparked interest in its use for nanophotonic devices, chiefly due to its large bandgap facilitating operation in blue wavelengths coupled with promises of enhanced nonlinear optical properties such as a large second-order susceptibility ($χ^{(2)}$). It is still an open question whether ScAlN can outperform oxide ferroelectrics concerning the Pockels effect -- an electro-optic coupling extensively utilized in optical communications devices. In this paper, we present a comprehensive theoretical analysis and experimental demonstration of ScAlN's Pockels effect. Our findings reveal that the electro-optic coupling of ScAlN, despite being weak at low Sc concentration, may be significantly enhanced at high levels of Sc do**, which points the direction of continued research efforts to unlock the full potential of ScAlN.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Heterogeneous sapphire-supported low-loss photonics platform
Authors:
Yubo Wang,
Yu Guo,
Yiyu Zhou,
Hao Xie,
Hong X. Tang
Abstract:
Sapphire is a promising wideband substrate material for visible photonics. It is a common growth substrate for III-nitride light-emitting diodes and laser structures. Doped sapphires are important gain media foundational to the development of titanium-sapphire and ruby lasers. For lasers operating at visible and near-infrared wavelengths, a photonic platform that minimizes loss while maximizing ga…
▽ More
Sapphire is a promising wideband substrate material for visible photonics. It is a common growth substrate for III-nitride light-emitting diodes and laser structures. Doped sapphires are important gain media foundational to the development of titanium-sapphire and ruby lasers. For lasers operating at visible and near-infrared wavelengths, a photonic platform that minimizes loss while maximizing gain material overlap is crucial. Here, we introduce a novel low-loss waveguiding strategy that establishes high-performance integrated photonics on sapphire substrates. This platform achieves a high intrinsic quality factor of 5.6 million near 780 nm and features direct compatibility with a range of solid-state laser gain media.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
Sub-terahertz optomechanics
Authors:
Jiacheng Xie,
Mohan Shen,
Hong X. Tang
Abstract:
We demonstrate optomechanics in the sub-terahertz regime. An optical racetrack resonator, patterned from thin-film lithium niobate, is suspended to support mechanical structures oscillating at these extremely high frequencies, which are read out through cavity optomechanical coupling. Our hybrid platform paves the way for advancing mechanical systems in the quantum regime at elevated temperatures.
We demonstrate optomechanics in the sub-terahertz regime. An optical racetrack resonator, patterned from thin-film lithium niobate, is suspended to support mechanical structures oscillating at these extremely high frequencies, which are read out through cavity optomechanical coupling. Our hybrid platform paves the way for advancing mechanical systems in the quantum regime at elevated temperatures.
△ Less
Submitted 30 April, 2024;
originally announced May 2024.
-
Light-Induced Microwave Noise in Superconducting Microwave-Optical Transducers
Authors:
Mingrui Xu,
Chunzhen Li,
Yuntao Xu,
Hong X. Tang
Abstract:
Microwave-to-optical transducers are integral to the future of superconducting quantum computing, as they would enable scaling and long-distance communication of superconducting quantum processors through optical fiber links. However, optically-induced microwave noise poses a significant challenge in achieving quantum transduction between microwave and optical frequencies. In this work, we study l…
▽ More
Microwave-to-optical transducers are integral to the future of superconducting quantum computing, as they would enable scaling and long-distance communication of superconducting quantum processors through optical fiber links. However, optically-induced microwave noise poses a significant challenge in achieving quantum transduction between microwave and optical frequencies. In this work, we study light-induced microwave noise in an integrated electro-optical transducer harnessing Pockels effect of thin film lithium niobate. We reveal three sources of added noise with distinctive time constants ranging from sub-100 nanoseconds to milliseconds. Our results gain insights into the mechanisms and corresponding mitigation strategies for light-induced microwave noise in superconducting microwave-optical transducers, and pave the way towards realizing the ultimate goal of quantum transduction.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Photonic link from single flux quantum circuits to room temperature
Authors:
Mohan Shen,
Jiacheng Xie,
Yuntao Xu,
Sihao Wang,
Risheng Cheng,
Wei Fu,
Yiyu Zhou,
Hong X. Tang
Abstract:
Broadband, energy-efficient signal transfer between cryogenic and room-temperature environment has been a major bottleneck for superconducting quantum and classical logic circuits. Photonic links promise to overcome this challenge by offering simultaneous high bandwidth and low thermal load. However, the development of cryogenic electro-optic modulators -- a key component for photonic readout of e…
▽ More
Broadband, energy-efficient signal transfer between cryogenic and room-temperature environment has been a major bottleneck for superconducting quantum and classical logic circuits. Photonic links promise to overcome this challenge by offering simultaneous high bandwidth and low thermal load. However, the development of cryogenic electro-optic modulators -- a key component for photonic readout of electrical signals -- has been stifled by the stringent requirements of superconducting circuits. Rapid single flux quantum circuits (RSFQ), for example, operate with a tiny signal amplitude of only a few millivolts (mV), far below the volt-level signal used in conventional circuits. Here, we demonstrate the first direct optical readout of an RSFQ circuit without additional electrical amplification enabled by a novel superconducting electro-optic modulator (SEOM) featuring a record-low half-wave voltage Vπ of 42 mV on a 1 m-long SEOM. Leveraging the low ohmic loss of superconductors, we break the fundamental Vπ-bandwidth trade-off and demonstrate electro-optic bandwidth up to 17 GHz on a 0.2 m-long SEOM at cryogenic temperatures. Our work presents a viable solution toward high-bandwidth signal transfer between future large-scale superconducting circuits and room-temperature electronics.
△ Less
Submitted 25 November, 2023; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Junction-free microwave two-mode radiation from a kinetic inductance nanowire
Authors:
Yufeng Wu,
Mingrui Xu,
Hong X. Tang
Abstract:
Parametric down-conversion is a widely exploited technique in optics to produce entangled states of photons for quantum information processing and quantum sensing. In the microwave domain, devices based on Josephson junctions, such as Josephson parametric amplifiers (JPAs) and voltage-biased Josephson junctions, have been successfully utilized to generate such states. However, their high susceptib…
▽ More
Parametric down-conversion is a widely exploited technique in optics to produce entangled states of photons for quantum information processing and quantum sensing. In the microwave domain, devices based on Josephson junctions, such as Josephson parametric amplifiers (JPAs) and voltage-biased Josephson junctions, have been successfully utilized to generate such states. However, their high susceptibility to magnetic fields has posed challenges in many applications. Here we demonstrate the generation of two-mode squeezed states via four-wave-mixing in a superconducting nanowire resonator patterned from NbN. The NbN nanowire exhibits a strong Kerr nonlinearity, resulting in the emission of a signal-idler pair with a cross-correlation of $g^{(2)}(0) = 11.9$. Owing to the magnetic resilience and high critical temperature ($T_c$) of NbN, our microwave parametric sources based on kinetic inductance promise an expanded range of potential applications.
△ Less
Submitted 12 February, 2024; v1 submitted 3 August, 2023;
originally announced August 2023.
-
Radiatively-cooled quantum microwave amplifiers
Authors:
Mingrui Xu,
Yufeng Wu,
Wei Dai,
Hong X. Tang
Abstract:
Superconducting microwave amplifiers are essential for sensitive signal readout in superconducting quantum processors. Typically based on Josephson Junctions, these amplifiers require operation at milli-Kelvin temperatures to achieve quantum-limited performance. Here we demonstrate a quantum microwave amplifier that employs radiative cooling to operate at elevated temperatures. This kinetic-induct…
▽ More
Superconducting microwave amplifiers are essential for sensitive signal readout in superconducting quantum processors. Typically based on Josephson Junctions, these amplifiers require operation at milli-Kelvin temperatures to achieve quantum-limited performance. Here we demonstrate a quantum microwave amplifier that employs radiative cooling to operate at elevated temperatures. This kinetic-inductance-based parametric amplifier, patterned from a single layer of high-$T_\mathrm{c}$ NbN thin film\cmt{in the form of a nanobridge}, maintains a high gain and meanwhile enables low added noise of 1.3 quanta when operated at 1.5 Kelvin. Remarkably, this represents only a 0.2 quanta increase compared to the performance at a base temperature of 0.1 Kelvin. By uplifting the parametric amplifiers from the mixing chamber without compromising readout efficiency, this work represents an important step for realizing scalable microwave quantum technologies.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Ultra-high Q alumina optical microresonators in the UV and blue bands
Authors:
Chengxing He,
Yubo Wang,
Carlo Waldfried,
Guangcanlan Yang,
Jun-Fei Zheng,
Shu Hu,
Hong X. Tang
Abstract:
UV and visible photonics enable applications ranging from spectroscopic sensing to communication and quantum information processing. Photonics structures in these wavelength regimes, however, tend to experience higher loss than their IR counterpart. Particularly in the near-UV band, on-chip optical microresonators have not yet achieved a quality factor beyond 1 million. Here we report ultra-low-lo…
▽ More
UV and visible photonics enable applications ranging from spectroscopic sensing to communication and quantum information processing. Photonics structures in these wavelength regimes, however, tend to experience higher loss than their IR counterpart. Particularly in the near-UV band, on-chip optical microresonators have not yet achieved a quality factor beyond 1 million. Here we report ultra-low-loss photonic waveguides and resonators patterned from alumina thin films prepared by a highly scalable atomic layer deposition process. We demonstrate ultra high Q factor of 1.5$\,\times\,$10$^6$ at 390nm, a record value at UV bands, and 1.9$\,\times\,$10$^6$ at 488.5nm.
△ Less
Submitted 19 August, 2023; v1 submitted 2 July, 2023;
originally announced July 2023.
-
Domain control and periodic poling of epitaxial ScAlN
Authors:
Fengyan Yang,
Fengyan Yang,
Ding Wang,
** Wang,
Juanjuan Lu,
Zetian Mi,
Hong X. Tang Tang
Abstract:
ScAlN is an emerging ferroelectric material that possesses large band gap, strong piezoelectricity, and holds great promises for enhanced χ^{(2)} nonliearity. In this study, we demonstrate high-fidelity ferroelectric domain switching and periodic poling of Al-polar ScAlN thin film epitaxially grown on on c-axis sapphire substrate using gallium nitride as a buffer layer. Uniform poling of ScAlN wit…
▽ More
ScAlN is an emerging ferroelectric material that possesses large band gap, strong piezoelectricity, and holds great promises for enhanced χ^{(2)} nonliearity. In this study, we demonstrate high-fidelity ferroelectric domain switching and periodic poling of Al-polar ScAlN thin film epitaxially grown on on c-axis sapphire substrate using gallium nitride as a buffer layer. Uniform poling of ScAlN with periods ranging from 2 um to 0.4 um is realized. The ability to lithographically control the polarization of epitaxial ScAlN presents a critical advance for its further exploitation in ferroelectric storage and nonlinear optics applications.
△ Less
Submitted 14 August, 2023; v1 submitted 2 July, 2023;
originally announced July 2023.
-
Two-colour dissipative solitons and breathers in microresonator second-harmonic generation
Authors:
Juanjuan Lu,
Danila N. Puzyrev,
Vladislav V. Pankratov,
Dmitry V. Skryabin,
Fengyan Yang,
Zheng Gong,
Joshua B. Surya,
Hong X. Tang
Abstract:
Frequency conversion of dissipative solitons associated with the generation of broadband optical frequency combs having a tooth spacing of hundreds of giga-hertz is a topical challenge holding the key to practical applications in precision spectroscopy and data processing. The work in this direction is underpinned by fundamental problems in nonlinear and quantum optics. Here, we present the dissip…
▽ More
Frequency conversion of dissipative solitons associated with the generation of broadband optical frequency combs having a tooth spacing of hundreds of giga-hertz is a topical challenge holding the key to practical applications in precision spectroscopy and data processing. The work in this direction is underpinned by fundamental problems in nonlinear and quantum optics. Here, we present the dissipative two-colour bright-bright and dark-dark solitons in a quasi-phase-matched microresonator pumped for the second-harmonic generation in the near-infrared spectral range. We also found the breather states associated with the pulse front motion and collisions. The soliton regime is found to be typical in slightly phase-mismatched resonators, while the phase-matched ones reveal broader but incoherent spectra and higher-order harmonic generation. Soliton and breather effects reported here exist for the negative tilt of the resonance line, which is possible only via the dominant contribution of second-order nonlinearity.
△ Less
Submitted 21 May, 2023;
originally announced May 2023.
-
Architectures for Multinode Superconducting Quantum Computers
Authors:
James Ang,
Gabriella Carini,
Yanzhu Chen,
Isaac Chuang,
Michael Austin DeMarco,
Sophia E. Economou,
Alec Eickbusch,
Andrei Faraon,
Kai-Mei Fu,
Steven M. Girvin,
Michael Hatridge,
Andrew Houck,
Paul Hilaire,
Kevin Krsulich,
Ang Li,
Chenxu Liu,
Yuan Liu,
Margaret Martonosi,
David C. McKay,
James Misewich,
Mark Ritter,
Robert J. Schoelkopf,
Samuel A. Stein,
Sara Sussman,
Hong X. Tang
, et al. (8 additional authors not shown)
Abstract:
Many proposals to scale quantum technology rely on modular or distributed designs where individual quantum processors, called nodes, are linked together to form one large multinode quantum computer (MNQC). One scalable method to construct an MNQC is using superconducting quantum systems with optical interconnects. However, a limiting factor of these machines will be internode gates, which may be t…
▽ More
Many proposals to scale quantum technology rely on modular or distributed designs where individual quantum processors, called nodes, are linked together to form one large multinode quantum computer (MNQC). One scalable method to construct an MNQC is using superconducting quantum systems with optical interconnects. However, a limiting factor of these machines will be internode gates, which may be two to three orders of magnitude noisier and slower than local operations. Surmounting the limitations of internode gates will require a range of techniques, including improvements in entanglement generation, the use of entanglement distillation, and optimized software and compilers, and it remains unclear how improvements to these components interact to affect overall system performance, what performance from each is required, or even how to quantify the performance of each. In this paper, we employ a `co-design' inspired approach to quantify overall MNQC performance in terms of hardware models of internode links, entanglement distillation, and local architecture. In the case of superconducting MNQCs with microwave-to-optical links, we uncover a tradeoff between entanglement generation and distillation that threatens to degrade performance. We show how to navigate this tradeoff, lay out how compilers should optimize between local and internode gates, and discuss when noisy quantum links have an advantage over purely classical links. Using these results, we introduce a roadmap for the realization of early MNQCs which illustrates potential improvements to the hardware and software of MNQCs and outlines criteria for evaluating the landscape, from progress in entanglement generation and quantum memory to dedicated algorithms such as distributed quantum phase estimation. While we focus on superconducting devices with optical interconnects, our approach is general across MNQC implementations.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Controlling single rare earth ion emission in an electro-optical nanocavity
Authors:
Likai Yang,
Sihao Wang,
Mohan Shen,
Jiacheng Xie,
Hong X. Tang
Abstract:
Rare earth emitters enable critical quantum resources including spin qubits, single photon sources, and quantum memories. Yet, probing of single ions remains challenging due to low emission rate of their intra-4f optical transitions. One feasible approach is through Purcell enhanced emission in optical cavities. The ability to modulate cavity-ion coupling in real time will further elevate the capa…
▽ More
Rare earth emitters enable critical quantum resources including spin qubits, single photon sources, and quantum memories. Yet, probing of single ions remains challenging due to low emission rate of their intra-4f optical transitions. One feasible approach is through Purcell enhanced emission in optical cavities. The ability to modulate cavity-ion coupling in real time will further elevate the capacity of such systems. Here, we demonstrate direct control of single ion emission by embedding erbium dopants in an electro-optically active photonic crystal cavity patterned from thin-film lithium niobate. Purcell factor over 170 enables single ion detection, which is verified by second-order autocorrelation measurement. Dynamic control of emission rate is realized by leveraging electro-optic tuning of resonance frequency. Using this feature, storage and retrieval of single ion excitation is further demonstrated, without perturbing the emission characteristics. These results promise new opportunities for controllable single photon sources and efficient spin-photon interfaces.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Light-induced dynamic frequency shifting of microwave photons in a superconducting electro-optic converter
Authors:
Yuntao Xu,
Wei Fu,
Yiyu Zhou,
Mingrui Xu,
Mohan Shen,
Ayed Al Sayem,
Hong X. Tang
Abstract:
Hybrid superconducting-photonic microresonators are a promising platform for realizing microwave-to-optical transduction. However, the absorption of scattered photons by the superconductors leads to unintended microwave resonance frequency variation and linewidth broadening. Here, we experimentally study the dynamics of this effect and its impact on microwave-to-optics conversion in an integrated…
▽ More
Hybrid superconducting-photonic microresonators are a promising platform for realizing microwave-to-optical transduction. However, the absorption of scattered photons by the superconductors leads to unintended microwave resonance frequency variation and linewidth broadening. Here, we experimentally study the dynamics of this effect and its impact on microwave-to-optics conversion in an integrated lithium niobate-superconductor hybrid resonator platform. We unveiled an adiabatic frequency shifting of the intracavity microwave photons induced by the fast photo-responses of the thin-film superconducting resonator. As a result, the temporal and spectral responses of electro-optics transduction are modified and well described by our theoretical model. This work provides important insights on the light-induced conversion dynamics which must be considered in future designs of hybrid superconducting-photonic system.
△ Less
Submitted 19 November, 2022;
originally announced November 2022.
-
Magnetic field-resilient quantum-limited parametric amplifier
Authors:
Mingrui Xu,
Risheng Cheng,
Yufeng Wu,
Gangqiang Liu,
Hong X. Tang
Abstract:
Superconducting parametric amplifiers are crucial components in microwave quantum circuits for enabling quantum-limited signal readout. The best-performing such amplifiers are often based on Josephson junctions, which however are sensitive to magnetic fields. Therefore, they require magnetic shields and are not easily integratable with other quantum systems that operates within magnetic fields, su…
▽ More
Superconducting parametric amplifiers are crucial components in microwave quantum circuits for enabling quantum-limited signal readout. The best-performing such amplifiers are often based on Josephson junctions, which however are sensitive to magnetic fields. Therefore, they require magnetic shields and are not easily integratable with other quantum systems that operates within magnetic fields, such as spin ensemble quantum memories. To tackle this challenge, we have developed a kinetic inductance-based parametric amplifier featuring a NbN nanobridge instead of Josephson Junctions, which provides the desired nonlinearity for a strong parametric gain up to 42 dB. The added noise of this nanobridge kinetic-inductance parametric amplifier (hereby referred as NKPA) is calibrated and found to be $0.59\pm 0.03$ quanta for phase-preserving amplification, approaching the quantum limit of 0.5 quanta. Most importantly, we show that such excellent noise performance is preserved in an in-plane magnetic field up to 427 mT, the maximum field available in our experiment. This magnetic field-resilient parametric amplifier presents an opportunity towards addressing single electron-spin resonance and more efficient search for Axions as well as Majorana Fermions.
△ Less
Submitted 15 November, 2022; v1 submitted 27 September, 2022;
originally announced September 2022.
-
Superconducting cavity piezo-electromechanics: the realization of an acoustic frequency comb at microwave frequencies
Authors:
Xu Han,
Chang-Ling Zou,
Wei Fu,
Mingrui Xu,
Yuntao Xu,
Hong X. Tang
Abstract:
We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we furthe…
▽ More
We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.
△ Less
Submitted 12 July, 2022;
originally announced August 2022.
-
Unveiling photon statistics with a 100-pixel photon-number-resolving detector
Authors:
Risheng Cheng,
Yiyu Zhou,
Sihao Wang,
Mohan Shen,
Towsif Taher,
Hong X. Tang
Abstract:
Single-photon detectors are ubiquitous in quantum information science and quantum sensing. They are key enabling technologies for numerous scientific discoveries and fundamental tests of quantum optics. Photon-number-revolving detectors are the ultimate measurement tool of light. However, few detectors to date can provide high-fidelity photon number resolution at few-photon levels. Here, we demons…
▽ More
Single-photon detectors are ubiquitous in quantum information science and quantum sensing. They are key enabling technologies for numerous scientific discoveries and fundamental tests of quantum optics. Photon-number-revolving detectors are the ultimate measurement tool of light. However, few detectors to date can provide high-fidelity photon number resolution at few-photon levels. Here, we demonstrate an on-chip detector that can resolve up to 100 photons by spatiotemporally multiplexing an array of superconducting nanowires along a single waveguide. The unparalleled photon number resolution paired with the high-speed response exclusively allows us to unveil the quantum photon statistics of a true thermal light source for the first time, which is realized by direct measurement of high-order correlation function g^(N) with N up to 15, observation of photon-subtraction-induced photon number enhancement, and quantum-limited state discrimination against a coherent light source. Our detector provides a viable route towards various important applications, including photonic quantum computation and quantum metrology.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Quantum transduction is enhanced by single mode squeezing operators
Authors:
Changchun Zhong,
Mingrui Xu,
Aashish Clerk,
Hong X. Tang,
Liang Jiang
Abstract:
Quantum transduction is an essential ingredient in scaling up distributed quantum architecture and is actively pursued based on various physical platforms. However, demonstrating a transducer with positive quantum capacity is still practically challenging. In this work, we discuss a new approach to relax the impedance matching condition to half impedance matching condition, which is achieved by in…
▽ More
Quantum transduction is an essential ingredient in scaling up distributed quantum architecture and is actively pursued based on various physical platforms. However, demonstrating a transducer with positive quantum capacity is still practically challenging. In this work, we discuss a new approach to relax the impedance matching condition to half impedance matching condition, which is achieved by introducing two-photon drive in the electro-optic transducer. We show the quantum transduction capacity can be enhanced and can be understood in a simple interference picture with the help of Bloch-Messiah decomposition. The parameter regimes with positive quantum capacity is identified and compared with and without the drive, indicating that the parametric drive-induced enhancement is really promising in demonstrating quantum state conversion, and is expected to boost the performance of transduction with various physical platforms.
△ Less
Submitted 8 May, 2022; v1 submitted 12 April, 2022;
originally announced April 2022.
-
Monolithic Kerr and electro-optic hybrid microcombs
Authors:
Zheng Gong,
Mohan Shen,
Juanjuan Lu,
Joshua B,
Surya Hong X. Tang
Abstract:
Advances in microresonator-based soliton generation promise chip-scale integration of optical frequency comb for applications spanning from time kee** to frequency synthesis. Miniaturized cavities harness Kerr nonlinearity and enable terahertz soliton repetition rates. However, such high repetition rates are not amenable to direct electronic detection. Here, we demonstrate hybrid Kerr and electr…
▽ More
Advances in microresonator-based soliton generation promise chip-scale integration of optical frequency comb for applications spanning from time kee** to frequency synthesis. Miniaturized cavities harness Kerr nonlinearity and enable terahertz soliton repetition rates. However, such high repetition rates are not amenable to direct electronic detection. Here, we demonstrate hybrid Kerr and electro-optic microcombs using the lithium niobate thin film that exhibits both Kerr and Pockels nonlinearities. By interleaving the high-repetition-rate Kerr soliton comb with the low-repetition-rate electro-optic comb on the same waveguide, the wide Kerr soliton mode spacing is divided within a single chip, allowing for subsequent electronic detection and feedback control of the soliton repetition rate. Our work establishes an integrated electronic interface to Kerr solitons of terahertz repetition rates, paving the path towards chipscale optical-to-microwave frequency division and comb locking.
△ Less
Submitted 6 February, 2022;
originally announced February 2022.
-
Planar Integrated Magneto Optical Trap
Authors:
Liang Chen,
Chang-Jiang Huang,
Xin-Biao Xu,
Zheng-Tian Lu,
Zhu-Bo Wang,
Guang-Jie Chen,
Ji-Zhe Zhang,
Hong X. Tang,
Chun-Hua Dong,
Wen Liu,
Guo-Yong Xiang,
Guang-Can Guo,
Chang-Ling Zou
Abstract:
Abstract The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam; the flat coil chip replaces the conventional anti-Helmholtz…
▽ More
Abstract The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam; the flat coil chip replaces the conventional anti-Helmholtz coils of a cylindrical geometry. We trap 10^{4} cold ^{87}\text{Rb} atoms in the planar-integrated MOT, at a point 3-9 mm above the chip surface. This novel configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock and quantum memory devices.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Efficient and tunable blue light generation using lithium niobate nonlinear photonics
Authors:
Ayed Al Sayem,
Yubo Wang,
Juanjuan Lu,
Xianwen Liu,
Alexander W. Bruch,
Hong X. Tang
Abstract:
Thin film lithium niobate (LN) has recently emerged as a playground for chip-scale nonlinear optics and leads to highly efficient frequency conversions from near infrared to near-visible bands. For many nonlinear and quantum photonics applications, it is desirable to operate deep into the visible band within LN's transparency window. However, the strong material dispersion at short wavelengths mak…
▽ More
Thin film lithium niobate (LN) has recently emerged as a playground for chip-scale nonlinear optics and leads to highly efficient frequency conversions from near infrared to near-visible bands. For many nonlinear and quantum photonics applications, it is desirable to operate deep into the visible band within LN's transparency window. However, the strong material dispersion at short wavelengths makes phase-matching difficult, necessitating sub-micron scale control of domain structures for efficient quasi-phase-matching (QPM). Here we report the operation of thin film LN in the blue wavelength and high fidelity poling of thin-film LN waveguide to this regime. As a result, quasi-phase matching is realized between IR (871nm) and blue (435.5nm) wavelengths in a straight waveguide and prompts strong blue light generation with a conversion efficiency $2900\pm400\%W^{-1}cm^{-2}$
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Cavity Magnonics
Authors:
Babak Zare Rameshti,
Silvia Viola Kusminskiy,
James A. Haigh,
Koji Usami,
Dany Lachance-Quirion,
Yasunobu Nakamura,
Can-Ming Hu,
Hong X. Tang,
Gerrit E. W. Bauer,
Yaroslav M. Blanter
Abstract:
Cavity magnonics deals with the interaction of magnons - elementary excitations in magnetic materials - and confined electromagnetic fields. We introduce the basic physics and review the experimental and theoretical progress of this young field that is gearing up for integration in future quantum technologies. Much of its appeal is derived from the strong magnon-photon coupling and the easily-reac…
▽ More
Cavity magnonics deals with the interaction of magnons - elementary excitations in magnetic materials - and confined electromagnetic fields. We introduce the basic physics and review the experimental and theoretical progress of this young field that is gearing up for integration in future quantum technologies. Much of its appeal is derived from the strong magnon-photon coupling and the easily-reached nonlinear regime in microwave cavities. The interaction of magnons with light as detected by Brillouin light scattering is enhanced in magnetic optical resonators, which can be employed to manipulate magnon distributions. The cavity photon-mediated coupling of a magnon mode to a superconducting qubit enables measurements in the single magnon limit.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Roadmap on Integrated Quantum Photonics
Authors:
Galan Moody,
Volker J. Sorger,
Daniel J. Blumenthal,
Paul W. Juodawlkis,
William Loh,
Cheryl Sorace-Agaskar,
Alex E. Jones,
Krishna C. Balram,
Jonathan C. F. Matthews,
Anthony Laing,
Marcelo Davanco,
Lin Chang,
John E. Bowers,
Niels Quack,
Christophe Galland,
Igor Aharonovich,
Martin A. Wolff,
Carsten Schuck,
Neil Sinclair,
Marko Lončar,
Tin Komljenovic,
David Weld,
Shayan Mookherjea,
Sonia Buckley,
Marina Radulaski
, et al. (30 additional authors not shown)
Abstract:
Integrated photonics is at the heart of many classical technologies, from optical communications to biosensors, LIDAR, and data center fiber interconnects. There is strong evidence that these integrated technologies will play a key role in quantum systems as they grow from few-qubit prototypes to tens of thousands of qubits. The underlying laser and optical quantum technologies, with the required…
▽ More
Integrated photonics is at the heart of many classical technologies, from optical communications to biosensors, LIDAR, and data center fiber interconnects. There is strong evidence that these integrated technologies will play a key role in quantum systems as they grow from few-qubit prototypes to tens of thousands of qubits. The underlying laser and optical quantum technologies, with the required functionality and performance, can only be realized through the integration of these components onto quantum photonic integrated circuits (QPICs) with accompanying electronics. In the last decade, remarkable advances in quantum photonic integration and a dramatic reduction in optical losses have enabled benchtop experiments to be scaled down to prototype chips with improvements in efficiency, robustness, and key performance metrics. The reduction in size, weight, power, and improvement in stability that will be enabled by QPICs will play a key role in increasing the degree of complexity and scale in quantum demonstrations. In the next decade, with sustained research, development, and investment in the quantum photonic ecosystem (i.e. PIC-based platforms, devices and circuits, fabrication and integration processes, packaging, and testing and benchmarking), we will witness the transition from single- and few-function prototypes to the large-scale integration of multi-functional and reconfigurable QPICs that will define how information is processed, stored, transmitted, and utilized for quantum computing, communications, metrology, and sensing. This roadmap highlights the current progress in the field of integrated quantum photonics, future challenges, and advances in science and technology needed to meet these challenges.
△ Less
Submitted 22 September, 2021; v1 submitted 5 February, 2021;
originally announced February 2021.
-
Ultralow-threshold thin-film lithium niobate optical parametric oscillator
Authors:
Juanjuan Lu,
Ayed Al Sayem,
Zheng Gong,
Joshua B. Surya,
Chang-Ling Zou,
Hong X. Tang
Abstract:
Materials with strong $χ^{(2)}$ optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss $χ^{(2)}$ materials remains challenging and limits the threshold power of on-chip $χ^{(2)}$ OPO. Here we report the first on-chip lithium niobate optical parametric oscillator at the telecom wavelengths…
▽ More
Materials with strong $χ^{(2)}$ optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss $χ^{(2)}$ materials remains challenging and limits the threshold power of on-chip $χ^{(2)}$ OPO. Here we report the first on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase matched, high-quality microring resonator, whose threshold power ($\sim$30 $μ$W) is 400 times lower than that in previous $χ^{(2)}$ integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained at a pump power of 93 $μ$W. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase matching and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides an potential platform for realizing photonic neural networks.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
Bidirectional electro-optic conversion reaching 1% efficiency with thin-film lithium niobate
Authors:
Yuntao Xu,
Ayed Al Sayem,
Linran Fan,
Sihao Wang,
Risheng Cheng,
Chang-Ling Zou,
Wei Fu,
Likai Yang,
Mingrui Xu,
Hong X. Tang
Abstract:
Superconducting cavity electro-optics (EO) presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance through an optical network. High EO conversion efficiency demands transduction materials with strong Pockels effect and excellent optical transparency. Thin-film Lithium Niobate (TFLN) offer…
▽ More
Superconducting cavity electro-optics (EO) presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance through an optical network. High EO conversion efficiency demands transduction materials with strong Pockels effect and excellent optical transparency. Thin-film Lithium Niobate (TFLN) offers these desired characteristics however so far has only delivered unidirectional conversion with efficiencies on the order of $10^{-5}$, largely impacted by its prominent photorefractive (PR) effect at cryogenic temperatures. Here we show that, by mitigating the PR effect and associated charge-screening effect, the device's conversion efficiency can be enhanced by orders of magnitude while maintaining stable cryogenic operation, thus allowing a demonstration of conversion bidirectionality and accurate quantification of on-chip efficiency. With the optimized monolithic integrated superconducting EO device based on TFLN-on-sapphire substrate, an on-chip conversion efficiency of 1.02% (internal efficiency, 15.2%) is realized. Our demonstration indicates that with further device improvement, it is feasible for TFLN to approach unitary internal conversion efficiency.
△ Less
Submitted 31 December, 2020; v1 submitted 29 December, 2020;
originally announced December 2020.
-
III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing
Authors:
Xianwen Liu,
Zheng Gong,
Alexander W. Bruch,
Joshua B. Surya,
Juanjuan Lu,
Hong X. Tang
Abstract:
Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate o…
▽ More
Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and Pockels nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline III-Nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave comb span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully-integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.
△ Less
Submitted 24 December, 2020;
originally announced December 2020.
-
Mitigating photorefractive effect in thin-filmlithium niobate microring resonators
Authors:
Yuntao Xu,
Mohan Shen,
Juanjuan Lu,
Joshua Surya,
Ayed Al Sayem,
Hong X. Tang
Abstract:
Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-films. In this paper, w…
▽ More
Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-films. In this paper, we show that the dielectric cladding on lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Inverse Faraday Effect in an Optomagnonic Waveguide
Authors:
Na Zhu,
Xufeng Zhang,
Xu Han,
Chang-Ling Zou,
Hong X. Tang
Abstract:
Single-mode high-index-contrast waveguides have been ubiquitously exploited in optical, microwave, and phononic structures for achieving enhanced wave-matter interactions. Although micro-scale optomechanical and electro-optical devices have been widely studied, optomagnonic devices remain a grand challenge at the microscale. Here, we introduce a planar optomagnonic waveguide platform based on a fe…
▽ More
Single-mode high-index-contrast waveguides have been ubiquitously exploited in optical, microwave, and phononic structures for achieving enhanced wave-matter interactions. Although micro-scale optomechanical and electro-optical devices have been widely studied, optomagnonic devices remain a grand challenge at the microscale. Here, we introduce a planar optomagnonic waveguide platform based on a ferrimagnetic insulator that simultaneously supports single transverse mode of spin waves (magnons) and highly confined optical modes. The co-localization of spin and light waves gives rise to enhanced inverse Faraday effect, and as a result, magnons are excited by an effective magnetic field generated by interacting optical photons. Moreover, the strongly enhanced optomagnonic interaction allows us to observe such effect using low-power (milliwatt level) light signals in the continuous-wave form, as opposed to high-intensity (megawatt peak power) light pulses that are typically required in magnetic bulk materials or thin films. The optically-driven magnons are detected electrically with preserved phase coherence, showing the feasibility for launching spin waves with low-power continuous optical fields.
△ Less
Submitted 3 January, 2021; v1 submitted 20 December, 2020;
originally announced December 2020.
-
Photorefraction-induced Bragg scattering in cryogenic lithium niobate ring resonators
Authors:
Yuntao Xu,
Ayed Al Sayem,
Chang-Ling Zou,
Linran Fan,
Hong X. Tang
Abstract:
We report intracavity Bragg scattering induced by photorefractive (PR) effect in high-Q lithium niobate (LN) ring resonators at cryogenic temperatures. We show that, when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an in…
▽ More
We report intracavity Bragg scattering induced by photorefractive (PR) effect in high-Q lithium niobate (LN) ring resonators at cryogenic temperatures. We show that, when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an incoming probe light, and results in selective and reconfigurable mode splittings. This PR-induced Bragg scattering effect, despite being undesired for many applications, could be utilized to enable optically programmable photonic components.
△ Less
Submitted 19 December, 2020;
originally announced December 2020.
-
Stable tuning of photorefractive micro-cavities using an auxiliary laser
Authors:
Joshua B. Surya,
Juanjuan Lu,
Yuntao Xu,
Hong X. Tang
Abstract:
Cavity nonlinear optics enables intriguing physical phenomena to occur at micro- or nano-scales with modest input powers. While this enhances capabilities in applications such as comb generation, frequency conversion and quantum optics, undesired nonlinear effects including photorefraction and thermal bistability are exacerbated. In this letter, we propose and demonstrate a highly effective method…
▽ More
Cavity nonlinear optics enables intriguing physical phenomena to occur at micro- or nano-scales with modest input powers. While this enhances capabilities in applications such as comb generation, frequency conversion and quantum optics, undesired nonlinear effects including photorefraction and thermal bistability are exacerbated. In this letter, we propose and demonstrate a highly effective method of achieving cavity stabilization using an auxiliary laser for controlling photorefraction in a z-cut periodically poled lithium niobate (LN) microcavity system. Our numerical study accurately models the photorefractive effect under high input powers, guiding future analyses and development of LN microcavity systems.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Efficient frequency conversion in a degenerate $χ^{(2)}$ microresonator
Authors:
Jia-Qi Wang,
Yuan-Hao Yang,
Ming Li,
Xin-Xin Hu,
Joshua B. Surya,
Xin-Biao Xu,
Chun-Hua Dong,
Guang-Can Guo,
Hong X. Tang,
Chang-Ling Zou
Abstract:
Microresonators on a photonic chip could enhance nonlinear optics effects, thus are promising for realizing scalable high-efficiency frequency conversion devices. However, fulfilling phase matching conditions among multiple wavelengths remains a significant challenge. Here, we present a feasible scheme for degenerate sum-frequency conversion that only requires the two-mode phase matching condition…
▽ More
Microresonators on a photonic chip could enhance nonlinear optics effects, thus are promising for realizing scalable high-efficiency frequency conversion devices. However, fulfilling phase matching conditions among multiple wavelengths remains a significant challenge. Here, we present a feasible scheme for degenerate sum-frequency conversion that only requires the two-mode phase matching condition. When the drive and the signal are both near resonance to the same telecom mode, an efficient on-chip photon-number conversion efficiency upto 42% was achieved, showing a broad tuning bandwidth over 250GHz. Furthermore, cascaded Pockels and Kerr nonlinear optical effects are observed, enabling the parametric amplification of the optical signal to a distinct wavelength in a single device. The scheme demonstrated in this work provides an alternative approach to realizing high-efficiency frequency conversion and is promising for future studies on communications, atom clocks, sensing, and imaging.
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Ground-state Pulsed Cavity Electro-optics for Microwave-to-optical Conversion
Authors:
Wei Fu,
Mingrui Xu,
Xianwen Liu,
Chang-Ling Zou,
Changchun Zhong,
Xu Han,
Mohan Shen,
Yuntao Xu,
Risheng Cheng,
Sihao Wang,
Liang Jiang,
Hong X. Tang
Abstract:
In the development of quantum microwave-to-optical (MO) converters, excessive noise induced by the parametric optical drive remains a major challenge at milli-Kelvin temperatures. Here we study the extraneous noise added to an electro-optic transducer in its quantum ground state under an intense pulsed optical excitation. The integrated electro-optical transducer leverages the inherent Pockels eff…
▽ More
In the development of quantum microwave-to-optical (MO) converters, excessive noise induced by the parametric optical drive remains a major challenge at milli-Kelvin temperatures. Here we study the extraneous noise added to an electro-optic transducer in its quantum ground state under an intense pulsed optical excitation. The integrated electro-optical transducer leverages the inherent Pockels effect of aluminum nitride microrings, flip-chip bonded to a superconducting resonator. Applying a pulsed optical drive with peak power exceeding the cooling power of the dilution refrigerator at its base temperature, we observe efficient bi-directional MO conversion, with near-ground state microwave thermal excitation ($\bar{n}_\mathrm{e}=0.09\pm0.06$). Time evolution study reveals that the residual thermal excitation is dominated by the superconductor absorption of stray light scattered off the chip-fiber interface. Our results shed light on suppressing microwave noise in a cavity electro-optic system under intense optical drive, which is an essential step towards quantum state transduction between microwave and optical frequencies.
△ Less
Submitted 21 October, 2020;
originally announced October 2020.
-
Photonic dissipation control for Kerr soliton generation in strongly Raman-active media
Authors:
Zheng Gong,
Ming Li,
Xianwen Liu,
Yuntao Xu,
Juanjuan Lu,
Alexander Bruch,
Joshua B. Surya,
Changling Zou,
Hong X. Tang
Abstract:
Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering (SRS), particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control---tailoring the energy dissipation of selected cavity modes---to purposely raise/lower the…
▽ More
Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering (SRS), particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control---tailoring the energy dissipation of selected cavity modes---to purposely raise/lower the threshold of Raman lasing in a strongly Raman-active lithium niobate microring resonator, and realize on-demand soliton mode-locking or Raman lasing. Numerical simulations are carried out to confirm our analyses and agree well with experiment results. Our work demonstrates an effective approach to address strong SRS for microcavity soliton generation.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
Noiseless photonic non-reciprocity via optically-induced magnetization
Authors:
Xin-Xin Hu,
Zhu-Bo Wang,
Pengfei Zhang,
Guang-Jie Chen,
Yan-Lei Zhang,
Gang Li,
Xu-Bo Zou,
Tiancai Zhang,
Hong X. Tang,
Chun-Hua Dong,
Guang-Can Guo,
Chang-Ling Zou
Abstract:
The realization of optical non-reciprocity is crucial for many device applications, and also of fundamental importance for manipulating and protecting the photons with desired time-reversal symmetry. Recently, various new mechanisms of magnetic-free non-reciprocity have been proposed and implemented, avoiding the limitation of the strong magnetic field imposed by the Faraday effect. However, due t…
▽ More
The realization of optical non-reciprocity is crucial for many device applications, and also of fundamental importance for manipulating and protecting the photons with desired time-reversal symmetry. Recently, various new mechanisms of magnetic-free non-reciprocity have been proposed and implemented, avoiding the limitation of the strong magnetic field imposed by the Faraday effect. However, due to the difficulties in suppressing the drive and its induced noises, these devices exhibit limited isolation performances and leave the quantum noise properties rarely studied. Here, we demonstrate a new approach of magnetic-free non-reciprocity by optically induced magnetization in an atom ensemble. Excellent isolation of signal (highest isolation ratio is 51.4 dB) is observed over a power dynamic range of 7 orders of magnitude, with the noiseless property verified by quantum statistics measurement. The approach is applicable to other atoms and atom-like emitters in solids, paving the way for future studies of integrated photonic non-reciprocal devices, unidirectional quantum storage and state transfer, as well as topological photonics technologies.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Towards 1% single photon nonlinearity with periodically-poled lithium niobate microring resonators
Authors:
Juanjuan Lu,
Ming Li,
Chang-Ling Zou,
Ayed Al Sayem,
Hong X. Tang
Abstract:
The absence of the single-photon nonlinearity has been a major roadblock in develo** quantum photonic circuits at optical frequencies. In this paper, we demonstrate a periodically-poled thin film lithium niobate microring resonator (PPLNMR) that reaches 5,000,000%/W second harmonic conversion efficiency---almost 20-fold enhancement over the state-of-the-art---by accessing its largest $χ^{(2)}$ t…
▽ More
The absence of the single-photon nonlinearity has been a major roadblock in develo** quantum photonic circuits at optical frequencies. In this paper, we demonstrate a periodically-poled thin film lithium niobate microring resonator (PPLNMR) that reaches 5,000,000%/W second harmonic conversion efficiency---almost 20-fold enhancement over the state-of-the-art---by accessing its largest $χ^{(2)}$ tensor component $d_{33}$ via quasi-phase matching. The corresponding single photon coupling rate $g/2π$ is estimated to be 1.2 MHz, which is an important milestone as it approaches the dissipation rate $κ/2π$ of best available lithium niobate microresonators developed in the community. Using a figure of merit defined as $g/κ$, our devices reach a single photon nonlinearity approaching 1%. We show that, by further scaling of the device, it is possible to improve the single photon nonlinearity to a regime where photon-blockade effect can be manifested.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
High-acoustic-index-contrast phononic circuits: numerical modeling
Authors:
Wance Wang,
Mohan Shen,
Chang-Ling Zou,
Wei Fu,
Zhen Shen,
Hong X. Tang
Abstract:
We numerically model key building blocks of a phononic integrated circuit that enable phonon routing in high-acoustic-index waveguides. Our particular focus is on Gallium Nitride-on-sapphire phononic platform which has recently demonstrated high acoustic confinement in its top layer without the use of suspended structures. We start with systematic simulation of various transverse phonon modes supp…
▽ More
We numerically model key building blocks of a phononic integrated circuit that enable phonon routing in high-acoustic-index waveguides. Our particular focus is on Gallium Nitride-on-sapphire phononic platform which has recently demonstrated high acoustic confinement in its top layer without the use of suspended structures. We start with systematic simulation of various transverse phonon modes supported in strip waveguides and ring resonators with sub-wavelength cross-section. Mode confinement and quality factors of phonon modes are numerically investigated with respect to geometric parameters. Quality factor up to $10^{8}$ is predicted in optimized ring resonators. We next study the design of the phononic directional couplers, and present key design parameters for achieving strong evanescent couplings between modes propagating in parallel waveguides. Last, interdigitated transducer electrodes are included in the simulation for direct excitation of a ring resonator and critical coupling between microwave input and phononic dissipation. Our work provides comprehensive numerical characterization of phonon modes and functional phononic components in high-acoustic-index phononic circuits, which supplements previous theories and contributes to the emerging field of phononic integrated circuits.
△ Less
Submitted 31 October, 2020; v1 submitted 29 June, 2020;
originally announced June 2020.
-
Epitaxial niobium nitride superconducting nanowire single-photon detectors
Authors:
Risheng Cheng,
John Wright,
Huili G. Xing,
Debdeep Jena,
Hong X. Tang
Abstract:
Superconducting nanowires used in single-photon detectors have been realized on amorphous or poly-crystalline films. Here, we report the use of single-crystalline NbN thin films for superconducting nanowire single-photon detectors (SNSPDs). Grown by molecular beam epitaxy (MBE) at high temperature on nearly lattice-matched AlN-on-sapphire substrates, the NbN films exhibit high degree of uniformity…
▽ More
Superconducting nanowires used in single-photon detectors have been realized on amorphous or poly-crystalline films. Here, we report the use of single-crystalline NbN thin films for superconducting nanowire single-photon detectors (SNSPDs). Grown by molecular beam epitaxy (MBE) at high temperature on nearly lattice-matched AlN-on-sapphire substrates, the NbN films exhibit high degree of uniformity and homogeneity. Even with relatively thick films, the fabricated nanowire detectors show saturated internal efficiency at near-IR wavelengths, demonstrating the potential of MBE-grown NbN for realizing large arrays of on-chip SNSPDs and their integration with AlN-based $χ^{(2)}$ quantum photonic circuits.
△ Less
Submitted 17 June, 2020;
originally announced June 2020.
-
Waveguide cavity optomagnonics for broadband multimode microwave-to-optics conversion
Authors:
Na Zhu,
Xufeng Zhang,
Xu Han,
Chang-Ling Zou,
Changchun Zhong,
Chiao-Hsuan Wang,
Liang Jiang,
Hong X. Tang
Abstract:
Cavity optomagnonics has emerged as a promising platform for studying coherent photon-spin interactions as well as tunable microwave-to-optical conversion. However, current implementation of cavity optomagnonics in ferrimagnetic crystals remains orders of magnitude larger in volume than state-of-the-art cavity optomechanical devices, resulting in very limited magneto-optical interaction strength.…
▽ More
Cavity optomagnonics has emerged as a promising platform for studying coherent photon-spin interactions as well as tunable microwave-to-optical conversion. However, current implementation of cavity optomagnonics in ferrimagnetic crystals remains orders of magnitude larger in volume than state-of-the-art cavity optomechanical devices, resulting in very limited magneto-optical interaction strength. Here, we demonstrate a cavity optomagnonic device based on integrated waveguides and its application for microwave-to-optical conversion. By designing a ferrimagnetic rib waveguide to support multiple magnon modes with maximal mode overlap to the optical field, we realize a high magneto-optical cooperativity which is three orders of magnitude higher compared to previous records obtained on polished YIG spheres. Furthermore, we achieve tunable conversion of microwave photons at around 8.45 GHz to 1550 nm light with a broad conversion bandwidth as large as 16.1 MHz. The unique features of the system point to novel applications at the crossroad between quantum optics and magnonics.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Pockels Soliton Microcomb
Authors:
Alexander W. Bruch,
Xianwen Liu,
Zheng Gong,
Joshua B. Surya,
Ming Li,
Chang-Ling Zou,
Hong. X. Tang
Abstract:
Kerr soliton microcombs have recently emerged as a prominent topic in integrated photonics and enabled new horizons for optical frequency metrology. Kerr soliton microcombs, as its name suggests, are based on the high-order cubic optical nonlinearity. It is desirable to exploit quadratic photonic materials, namely Pockels materials, for soliton generation and on-chip implementation of 1f-2f comb s…
▽ More
Kerr soliton microcombs have recently emerged as a prominent topic in integrated photonics and enabled new horizons for optical frequency metrology. Kerr soliton microcombs, as its name suggests, are based on the high-order cubic optical nonlinearity. It is desirable to exploit quadratic photonic materials, namely Pockels materials, for soliton generation and on-chip implementation of 1f-2f comb self-referencing. Such quadratically-driven solitons have been theoretically proposed, but have not yet been observed in a nanophotonic platform despite of recent progresses in quadratic comb generation in free-space and crystalline resonators. Here we report photonic chip-based Pockels microcomb solitons driven by three-wave mixing in an aluminum nitride microring resonator. In contrast to typical Kerr solitons, our Pockels soliton features unity soliton generation fidelity, two-by-two annihilation of multi-soliton states, favorable tuning dynamics, and high pump-to-soliton conversion efficiency.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
Design of micron-long superconducting nanowire perfect absorber for efficient high speed single-photon detection
Authors:
Risheng Cheng,
Sihao Wang,
Chang-Ling Zou,
Hong X. Tang
Abstract:
Despite very efficient superconducting nanowire single-photon detectors (SNSPDs) reported recently, combining their other performance advantages such as high speed and ultra-low timing jitter in a single device still remains challenging. In this work, we present a perfect absorber model and corresponding detector design based on a micron-long NbN nanowire integrated with a 2D-photonic crystal cavi…
▽ More
Despite very efficient superconducting nanowire single-photon detectors (SNSPDs) reported recently, combining their other performance advantages such as high speed and ultra-low timing jitter in a single device still remains challenging. In this work, we present a perfect absorber model and corresponding detector design based on a micron-long NbN nanowire integrated with a 2D-photonic crystal cavity of ultra-small mode volume, which promises simultaneous achievement of near-unity absorption, gigahertz counting rates and broadband optical response with a 3 dB bandwidth of 71 nm. Compared to previous stand-alone meandered and waveguide-integrated SNSPDs, this perfect absorber design addresses the trade space in size, efficiency, speed and bandwidth for realizing large on-chip single-photon detector arrays.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Cavity piezo-mechanics for superconducting-nanophotonic quantum interface
Authors:
Xu Han,
Wei Fu,
Changchun Zhong,
Chang-Ling Zou,
Yuntao Xu,
Ayed Al Sayem,
Mingrui Xu,
Sihao Wang,
Risheng Cheng,
Liang Jiang,
Hong X. Tang
Abstract:
Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryo…
▽ More
Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10-GHz phonons are resonantly coupled with photons in a superconducting and a nanophotonic cavities at the same time. Benefited from the achieved large piezo-mechanical cooperativity ($C_\mathrm{em}\sim7$) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.
△ Less
Submitted 21 February, 2020; v1 submitted 26 January, 2020;
originally announced January 2020.
-
Microwave--Optical entanglement in a Strongly Coupled Electro-Optomechanical System
Authors:
Changchun Zhong,
Xu Han,
Hong X. Tang,
Liang Jiang
Abstract:
Quantum transduction between microwave and optics can be realized by quantum teleportation if given reliable microwave-optical entanglement, namely entanglement-based quantum transduction. To realize this protocol, an entangled source with high-fidelity between the two frequencies is necessary. In this paper, we study the microwave and optical entanglement generation based on a generic cavity elec…
▽ More
Quantum transduction between microwave and optics can be realized by quantum teleportation if given reliable microwave-optical entanglement, namely entanglement-based quantum transduction. To realize this protocol, an entangled source with high-fidelity between the two frequencies is necessary. In this paper, we study the microwave and optical entanglement generation based on a generic cavity electro-optomechanical system in the strong coupling regime. Splittings are shown in the microwave and optical output spectra and the frequency entanglement between the two modes is quantified. We show that entanglement can be straightforwardly encoded in the frequency-bin degree of freedom and propose a feasible experiment to verify entangled photon pairs. The experimental implementation is systematically analyzed, and the preferable parameter regime for entanglement verification is identified. An inequality is given as a criterion for good entanglement verification with analysis of practical imperfections.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Lithium-Niobate-on-Insulator Waveguide-Integrated Superconducting Nanowire Single-Photon Detectors
Authors:
Ayed Al Sayem,
Risheng Cheng,
Sihao Wang,
Hong X. Tang
Abstract:
We demonstrate waveguide-integrated superconducting nanowire single-photon detectors on thin-film lithium niobate (LN). Using a 250 um-long NbN superconducting nanowire lithographically defined on top of a 125 um-long LN nanowaveguide, on-chip detection efficiency of 46% is realized with simultaneous high performance in dark count rate and timing jitter. As LN possesses high second-order nonlinear…
▽ More
We demonstrate waveguide-integrated superconducting nanowire single-photon detectors on thin-film lithium niobate (LN). Using a 250 um-long NbN superconducting nanowire lithographically defined on top of a 125 um-long LN nanowaveguide, on-chip detection efficiency of 46% is realized with simultaneous high performance in dark count rate and timing jitter. As LN possesses high second-order nonlinear \c{hi}(2) and electro-optic properties, an efficient single-photon detector on thin-film LN opens up the possibility to construct small scale fully-integrated quantum photonic chip which includes single-photon sources, filters, tunable quantum gates and detectors.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Incorporation of erbium ions into thin-film lithium niobate integrated photonics
Authors:
Sihao Wang,
Likai Yang,
Risheng Cheng,
Yuntao Xu,
Mohan Shen,
Rufus L. Cone,
Charles W. Thiel,
Hong X. Tang
Abstract:
As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. Here, we investigate the optical properties at 1.5 micron…
▽ More
As an active material with favorable linear and nonlinear optical properties, thin-film lithium niobate has demonstrated its potential in integrated photonics. Integration with rare-earth ions, which are promising candidates for quantum memories and transducers, will enrich the system with new applications in quantum information processing. Here, we investigate the optical properties at 1.5 micron wavelengths of rare-earth ions (Er$^{3+}$) implanted in thin-film lithium niobate waveguides and micro-ring resonators. Optical quality factors near a million after post annealing show that ion implantation damage can be successfully repaired. The transition linewidth and fluorescence lifetime of erbium ions are characterized, revealing values comparable to bulk-doped crystals. The ion-cavity coupling is observed through a Purcell enhanced fluorescence, from which a Purcell factor of ~3.8 is extracted. This platform is compatible with top-down lithography processes and leads to a scalable path for controlling spin-photon interfaces in photonic circuits.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Magnon-photon strong coupling for tunable microwave circulators
Authors:
Na Zhu,
Xu Han,
Chang-Ling Zou,
Mingrui Xu,
Hong X. Tang
Abstract:
We present a generic theoretical framework to describe non-reciprocal microwave circulation in a multimode cavity magnonic system and assess the optimal performance of practical circulator devices. We show that high isolation (> 56 dB), extremely low insertion loss (< 0.05 dB), and flexible bandwidth control can be potentially realized in high-quality-factor superconducting cavity based magnonic p…
▽ More
We present a generic theoretical framework to describe non-reciprocal microwave circulation in a multimode cavity magnonic system and assess the optimal performance of practical circulator devices. We show that high isolation (> 56 dB), extremely low insertion loss (< 0.05 dB), and flexible bandwidth control can be potentially realized in high-quality-factor superconducting cavity based magnonic platforms. These circulation characteristics are analyzed with materials of different spin densities. For high-spin-density materials such as yttrium iron garnet, strong coupling operation regime can be harnessed to obtain a broader circulation bandwidth. We also provide practical design principles for a highly integratible low-spin-density material (vanadium tetracyanoethylene) for narrow-band circulator operation, which could benefit noise-sensitive quantum microwave measurements. This theory can be extended to other coupled systems and provide design guidelines for achieving tunable microwave non-reciprocity for both classical and quantum applications.
△ Less
Submitted 2 April, 2020; v1 submitted 15 December, 2019;
originally announced December 2019.
-
Tunable telecom to mid-infrared optical parametric oscillation via microring-based $χ^{(3)}$ nonlinearities
Authors:
Yulong Tang,
Zheng Gong,
Xiangwen Liu,
Hong X. Tang
Abstract:
Optical parametric oscillation (OPO) with far-shifted frequency sidebands has attracted significant interests in precision spectroscopy and quantum information processing. Microresonator based OPO sources hold the advantages of miniaturized footprint and versatile dispersion engineering. Here we demonstrate large-frequency-shifted $χ^{(3)}$-based OPO from crystalline aluminum nitride microrings pu…
▽ More
Optical parametric oscillation (OPO) with far-shifted frequency sidebands has attracted significant interests in precision spectroscopy and quantum information processing. Microresonator based OPO sources hold the advantages of miniaturized footprint and versatile dispersion engineering. Here we demonstrate large-frequency-shifted $χ^{(3)}$-based OPO from crystalline aluminum nitride microrings pumped at $\sim$2 $μ$m in the normal dispersion regime. OPO in the telecom and mid-infrared bands with a frequency separation of 65.5 THz is achieved. The OPO frequency can be agilely tuned in the ranges of 10, 1 and 0.1 THz respectively by tailoring the microring dimensions, shifting the pump wavelength, and controlling the chip temperature. At high intracavity pump powers, the OPO sidebands further evolve into localized frequency comb lines. Such telecom to mid-infrared OPO with flexible wavelength tunability will lead to enhanced chip-scale light sources.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Periodically poled thin film lithium niobate microring resonators with a second-harmonic generation efficiency of 250,000%/W
Authors:
Juanjuan Lu,
Joshua B. Surya,
Xianwen Liu,
Alexander W. Bruch,
Zheng Gong,
Yuntao Xu,
Hong X. Tang
Abstract:
Lithium niobate (LN), dubbed by many as the silicon of photonics, has recently risen to the forefront of chip-scale nonlinear optics research since its demonstration as an ultralow-loss integrated photonics platform. Due to its significant quadratic nonlinearity ($χ^{(2)}$), LN inspires many important applications such as second-harmonic generation (SHG), spontaneous parametric down-conversion, an…
▽ More
Lithium niobate (LN), dubbed by many as the silicon of photonics, has recently risen to the forefront of chip-scale nonlinear optics research since its demonstration as an ultralow-loss integrated photonics platform. Due to its significant quadratic nonlinearity ($χ^{(2)}$), LN inspires many important applications such as second-harmonic generation (SHG), spontaneous parametric down-conversion, and optical parametric oscillation. Here, we demonstrate high-efficiency SHG in dual-resonant, periodically poled z-cut LN microrings, where quasi-phase matching is realized by field-assisted domain engineering. Meanwhile, dual-band operation is accessed by optimizing the coupling conditions in fundamental and second-harmonic bands via a single pulley waveguide. As a result, when pum** a periodically poled LN microring in the low power regime at around 1617nm, an on-chip SHG efficiency of 250,000%/W is achieved, a state-of-the-art value reported among current integrated photonics platforms. An absolute conversion efficiency of 15% is recorded with a low pump power of 115$μ$W in the waveguide. Such periodically poled LN microrings also present a versatile platform for other cavity-enhanced quasi-phase matched $χ^{(2)}$ nonlinear optical processes.
△ Less
Submitted 31 October, 2019;
originally announced November 2019.
-
Superconducting nanowire single-photon detectors fabricated from atomic-layer-deposited NbN
Authors:
Risheng Cheng,
Sihao Wang,
Hong X. Tang
Abstract:
High-quality ultra-thin films of niobium nitride (NbN) are developed by plasma-enhanced atomic layer deposition (PEALD) technique. Superconducting nanowire single-photon detectors (SNSPDs) patterned from this material exhibit high switching currents and saturated internal efficiencies over a broad bias range at 1550 nm telecommunication wavelength. Statistical analyses on hundreds of fabricated de…
▽ More
High-quality ultra-thin films of niobium nitride (NbN) are developed by plasma-enhanced atomic layer deposition (PEALD) technique. Superconducting nanowire single-photon detectors (SNSPDs) patterned from this material exhibit high switching currents and saturated internal efficiencies over a broad bias range at 1550 nm telecommunication wavelength. Statistical analyses on hundreds of fabricated devices show near-unity throughput yield due to exceptional homogeneity of the films. The ALD-NbN material represents an ideal superconducting material for fabricating large single-photon detector arrays combining high efficiency, low jitter, low dark counts.
△ Less
Submitted 25 November, 2019; v1 submitted 15 October, 2019;
originally announced October 2019.
-
Low-Dam** Ferromagnetic Resonance in Electron-Beam Patterned, High-$Q$ Vanadium Tetracyanoethylene Magnon Cavities
Authors:
Andrew Franson,
Na Zhu,
Seth Kurfman,
Michael Chilcote,
Denis R. Candido,
Kristen S. Buchanan,
Michael E. Flatté,
Hong X. Tang,
Ezekiel Johnston-Halperin
Abstract:
Integrating patterned, low-loss magnetic materials into microwave devices and circuits presents many challenges due to the specific conditions that are required to grow ferrite materials, driving the need for flip-chip and other indirect fabrication techniques. The low-loss ($α= 3.98 \pm 0.22 \times 10^{-5}$), room-temperature ferrimagnetic coordination compound vanadium tetracyanoethylene (…
▽ More
Integrating patterned, low-loss magnetic materials into microwave devices and circuits presents many challenges due to the specific conditions that are required to grow ferrite materials, driving the need for flip-chip and other indirect fabrication techniques. The low-loss ($α= 3.98 \pm 0.22 \times 10^{-5}$), room-temperature ferrimagnetic coordination compound vanadium tetracyanoethylene ($\mathrm{V[TCNE]}_x$) is a promising new material for these applications that is potentially compatible with semiconductor processing. Here we present the deposition, patterning, and characterization of $\mathrm{V[TCNE]}_x$ thin films with lateral dimensions ranging from 1 micron to several millimeters. We employ electron-beam lithography and liftoff using an aluminum encapsulated poly(methyl methacrylate), poly(methyl methacrylate-methacrylic acid) copolymer bilayer (PMMA/P(MMA-MAA)) on sapphire and silicon. This process can be trivially extended to other common semiconductor substrates. Films patterned via this method maintain low-loss characteristics down to 25 microns with only a factor of 2 increase down to 5 microns. A rich structure of thickness and radially confined spin-wave modes reveals the quality of the patterned films. Further fitting, simulation, and analytic analysis provides an exchange stiffness, $A_{ex} = 2.2 \pm 0.5 \times 10^{-10}$ erg/cm, as well as insights into the mode character and surface spin pinning. Below a micron, the deposition is non-conformal, which leads to interesting and potentially useful changes in morphology. This work establishes the versatility of $\mathrm{V[TCNE]}_x$ for applications requiring highly coherent magnetic excitations ranging from microwave communication to quantum information.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Polarization mode hybridization and conversion in phononic wire waveguides
Authors:
Zhen Shen,
Wei Fu,
Ri-Sheng Cheng,
Hendrick Townley,
Chang-Ling Zou,
Hong X. Tang
Abstract:
Phononic wire waveguides of subwavelength cross-section support two orthogonal polarization modes: the out-of-plane motion dominated Rayleigh-like and the in-plane motion dominated Love-like modes, analogous to transverse-electric and transverse-magnetic modes in photonic waveguides. Due to the anisotropic elasticity of the substrate material, the polarization states of phonons propagating along c…
▽ More
Phononic wire waveguides of subwavelength cross-section support two orthogonal polarization modes: the out-of-plane motion dominated Rayleigh-like and the in-plane motion dominated Love-like modes, analogous to transverse-electric and transverse-magnetic modes in photonic waveguides. Due to the anisotropic elasticity of the substrate material, the polarization states of phonons propagating along certain crystallographic orientations can strongly hybridize. Here we experimentally investigate the orientation-dependent mode hybridization in phononic wire waveguides patterned from GaN-on-sapphire thin films. Such mode hybridization allows efficient actuation of piezoelectrically inactive Love-like modes using common interdigital electrodes designed for Rayleigh-like modes, and further enables on-chip polarization conversion between guided transverse modes. Both are important for on-chip implementation of complex phononic circuits.
△ Less
Submitted 10 October, 2019;
originally announced October 2019.
-
Radiative cooling of a superconducting resonator
Authors:
Mingrui Xu,
Xu Han,
Chang-Ling Zou,
Wei Fu,
Yuntao Xu,
Changchun Zhong,
Liang Jiang,
Hong X. Tang
Abstract:
Cooling microwave resonators to near the quantum ground state, crucial for their operation in the quantum regime, is typically achieved by direct device refrigeration to a few tens of millikelvin. However, in quantum experiments that require high operation power such as microwave-to-optics quantum transduction, it is desirable to operate at higher temperatures with non-negligible environmental the…
▽ More
Cooling microwave resonators to near the quantum ground state, crucial for their operation in the quantum regime, is typically achieved by direct device refrigeration to a few tens of millikelvin. However, in quantum experiments that require high operation power such as microwave-to-optics quantum transduction, it is desirable to operate at higher temperatures with non-negligible environmental thermal excitations, where larger cooling power is available. In this Letter, we present a radiative cooling protocol to prepare a superconducting microwave mode near its quantum ground state in spite of warm environment temperatures for the resonator. In this proof-of-concept experiment, the mode occupancy of a 10-GHz superconducting resonator thermally anchored at 1.02~K is reduced to $0.44\pm0.05$ by radiatively coupling to a 70-mK cold load. This radiative cooling scheme allows high-operation-power microwave experiments to work in the quantum regime, and opens possibilities for routing microwave quantum states to elevated temperatures.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.