-
Decoupling of the many-body effects from the electron mass in GaAs by means of reduced dimensionality
Authors:
P. M. T. Vianez,
Y. **,
W. K. Tan,
Q. Liu,
J. P. Griffiths,
I. Farrer,
D. A. Ritchie,
O. Tsyplyatyev,
C. J. B. Ford
Abstract:
Determining the (bare) electron mass $m_0$ in crystals is often hindered by many-body effects since Fermi-liquid physics renormalises the band mass, making the observed effective mass $m^*$ depend on density. Here, we use a one-dimensional (1D) geometry to amplify the effect of interactions, forcing the electrons to form a nonlinear Luttinger liquid with separate holon and spinon bands, therefore…
▽ More
Determining the (bare) electron mass $m_0$ in crystals is often hindered by many-body effects since Fermi-liquid physics renormalises the band mass, making the observed effective mass $m^*$ depend on density. Here, we use a one-dimensional (1D) geometry to amplify the effect of interactions, forcing the electrons to form a nonlinear Luttinger liquid with separate holon and spinon bands, therefore separating the interaction effects from $m_0$. Measuring the spectral function of gated quantum wires formed in GaAs by means of magnetotunnelling spectroscopy and interpreting them using the 1D Fermi-Hubbard model, we obtain $m_0=(0.0525\pm0.0015)m_\textrm{e}$ in this material, where $m_\textrm{e}$ is the free-electron mass. By varying the density in the wires, we change the interaction parameter $r_\textrm{s}$ in the range from $\sim$1-4 and show that $m_0$ remains constant. The determined value of $m_0$ is $\sim 22$% lighter than observed in GaAs in geometries of higher dimensionality $D$ ($D>1$), consistent with the quasi-particle picture of a Fermi liquid that makes electrons heavier in the presence of interactions.
△ Less
Submitted 14 March, 2023; v1 submitted 27 October, 2021;
originally announced October 2021.
-
Augmenting control arms with Real-World Data for cancer trials: Hybrid control arm methods and considerations
Authors:
W. Katherine Tan,
Brian D. Segal,
Melissa D. Curtis,
Shrujal S. Baxi,
William B. Capra,
Elizabeth Garrett-Mayer,
Brian P. Hobbs,
David S. Hong,
Rebecca A. Hubbard,
Jiawen Zhu,
Somnath Sarkar,
Meghna Samant
Abstract:
Randomized controlled trials (RCTs) are the gold standard for assessing drug safety and efficacy. However, RCTs have some drawbacks which have led to the use of single-arm studies to make certain internal drug development and regulatory decisions, particularly in oncology. Hybrid controlled trials with real-world data (RWD), in which the control arm is composed of both trial and real-world patient…
▽ More
Randomized controlled trials (RCTs) are the gold standard for assessing drug safety and efficacy. However, RCTs have some drawbacks which have led to the use of single-arm studies to make certain internal drug development and regulatory decisions, particularly in oncology. Hybrid controlled trials with real-world data (RWD), in which the control arm is composed of both trial and real-world patients, have the potential to help address some of the shortcomings of both RCTs and single-arm studies in particular situations, such as when a disease has low prevalence or when the standard of care to be used in the control arm is ineffective or highly toxic and an experimental therapy shows early promise. This paper discusses why it may be beneficial to consider hybrid controlled trials with RWD, what such a design entails, when it may be appropriate, and how to conduct the analyses. We propose a novel two-step borrowing method for the construction of hybrid control arms. We use simulations to demonstrate the operating characteristics of dynamic and static borrowing methods, and highlight the trade-offs and analytic decisions that study teams will need to address when designing a hybrid study.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Microscopic metallic air-bridge arrays for connecting quantum devices
Authors:
Y. **,
M. Moreno,
P. M. T. Vianez,
W. K. Tan,
J. P. Griffiths,
I. Farrer,
D. A. Ritchie,
C. J. B. Ford
Abstract:
We present a single-exposure fabrication technique for a very large array of microscopic air-bridges using a tri-layer resist process with electron-beam lithography. The technique is capable of forming air-bridges with strong metal-metal or metal-substrate connections. This was demonstrated by its application in an electron tunnelling device consisting of 400 identical surface gates for defining q…
▽ More
We present a single-exposure fabrication technique for a very large array of microscopic air-bridges using a tri-layer resist process with electron-beam lithography. The technique is capable of forming air-bridges with strong metal-metal or metal-substrate connections. This was demonstrated by its application in an electron tunnelling device consisting of 400 identical surface gates for defining quantum wires, where the air-bridges are used as suspended connections for the surface gates. This technique enables us to create a large array of uniform one-dimensional channels that are open at both ends. In this article, we outline the details of the fabrication process, together with a study and the solution of the challenges present in the development of the technique, which includes the use of water-IPA (isopropyl alcohol) developer, calibration of resist thickness and numerical simulation of the development.
△ Less
Submitted 21 April, 2021; v1 submitted 11 February, 2021;
originally announced February 2021.
-
Observing separate spin and charge Fermi seas in a strongly correlated one-dimensional conductor
Authors:
P. M. T. Vianez,
Y. **,
M. Moreno,
A. S. Anirban,
A. Anthore,
W. K. Tan,
J. P. Griffiths,
I. Farrer,
D. A. Ritchie,
A. J. Schofield,
O. Tsyplyatyev,
C. J. B. Ford
Abstract:
An electron is usually considered to have only one form of kinetic energy, but could it have more, for its spin and charge, by exciting other electrons? In one dimension (1D), the physics of interacting electrons is captured well at low energies by the Tomonaga-Luttinger model, yet little has been observed experimentally beyond this linear regime. Here, we report on measurements of many-body modes…
▽ More
An electron is usually considered to have only one form of kinetic energy, but could it have more, for its spin and charge, by exciting other electrons? In one dimension (1D), the physics of interacting electrons is captured well at low energies by the Tomonaga-Luttinger model, yet little has been observed experimentally beyond this linear regime. Here, we report on measurements of many-body modes in 1D gated-wires using tunnelling spectroscopy. We observe two parabolic dispersions, indicative of separate Fermi seas at high energies, associated with spin and charge excitations, together with the emergence of two additional 1D 'replica' modes that strengthen with decreasing wire length. The effective interaction strength is varied by changing the amount of 1D inter-subband screening by over 45%. Our findings demonstrate the existence of spin-charge separation in the whole energy band outside the low-energy limit of validity of the Tomonaga-Luttinger model, and also set a constraint on the validity of the newer nonlinear Tomonaga-Luttinger theory.
△ Less
Submitted 1 July, 2022; v1 submitted 10 February, 2021;
originally announced February 2021.
-
Predictive case control designs for modification learning
Authors:
W Katherine Tan,
Patrick J Heagerty
Abstract:
Prediction models for clinical outcomes may be developed using a source dataset and additionally applied to new settings. Towards model external validation and model updating in the new setting, one procedure is model modification learning that involves the dual goals of recalibrating overall predictions as well as revising individual feature effects. Modification learning generally requires the c…
▽ More
Prediction models for clinical outcomes may be developed using a source dataset and additionally applied to new settings. Towards model external validation and model updating in the new setting, one procedure is model modification learning that involves the dual goals of recalibrating overall predictions as well as revising individual feature effects. Modification learning generally requires the collection of an adequate sample of true outcome labels from the new setting, which is frequently an expensive and time-consuming process, as it involves abstraction by human clinical experts. To reduce the abstraction burden for such new data collection, we propose a class of designs based on original model scores and their associated outcome predictions. We provide mathematical justification that the general predictive score sampling class results in valid samples for analysis. Then, we focus attention specifically on a stratified sampling procedure that we call predictive case control (PCC) sampling, which allows the dual modification learning goals to be achieved at a smaller sample size compared to simple random sampling (SRS). PCC sampling intentionally over-represents subjects with informative scores, where we suggest using the D-optimality and Binary Entropy information functions to summarize sample information. For design evaluation within the PCC class, we provide a computational framework to estimate and visualize empirical response surfaces of the proposed information functions. We demonstrate the benefit of using PCC designs for modification learning, relative to SRS, through Monte Carlo simulation. Finally, using radiology report data from the Lumbar Imaging with Reporting of Epidemiology (LIRE) study, we illustrate the application of PCC for new outcome label abstraction and subsequent modification learning across imaging modalities.
△ Less
Submitted 29 November, 2020;
originally announced November 2020.
-
A note on the amount of information borrowed from external data in hybrid controlled trials with time-to-event outcomes
Authors:
Brian D. Segal,
W. Katherine Tan
Abstract:
In situations where it is difficult to enroll patients in randomized controlled trials, external data can improve efficiency and feasibility. In such cases, adaptive trial designs could be used to decrease enrollment in the control arm of the trial by updating the randomization ratio at the interim analysis. Updating the randomization ratio requires an estimate of the amount of information effecti…
▽ More
In situations where it is difficult to enroll patients in randomized controlled trials, external data can improve efficiency and feasibility. In such cases, adaptive trial designs could be used to decrease enrollment in the control arm of the trial by updating the randomization ratio at the interim analysis. Updating the randomization ratio requires an estimate of the amount of information effectively borrowed from external data, which is typically done with a linear approximation. However, this linear approximation is not always a reliable estimate, which could potentially lead to sub-optimal randomization ratio updates. In this note, we highlight this issue through simulations for exponential time-to-event outcomes, because in this simple setting there is an exact solution available for comparison. We also propose a potential generalization that could complement the linear approximation in more complex settings, discuss challenges for this generalization, and recommend best practices for computing and interpreting estimates of the effective number of events borrowed.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Surrogate-guided sampling designs for classification of rare outcomes from electronic medical records data
Authors:
W. Katherine Tan,
Patrick J. Heagerty
Abstract:
Scalable and accurate identification of specific clinical outcomes has been enabled by machine-learning applied to electronic medical record (EMR) systems. The development of classification models requires the collection of a complete labeled data set, where true clinical outcomes are obtained by human expert manual review. For example, the development of natural language processing algorithms req…
▽ More
Scalable and accurate identification of specific clinical outcomes has been enabled by machine-learning applied to electronic medical record (EMR) systems. The development of classification models requires the collection of a complete labeled data set, where true clinical outcomes are obtained by human expert manual review. For example, the development of natural language processing algorithms requires the abstraction of clinical text data to obtain outcome information necessary for training models. However, if the outcome is rare then simple random sampling results in very few cases and insufficient information to develop accurate classifiers. Since large scale detailed abstraction is often expensive, time-consuming, and not feasible, more efficient strategies are needed. Under such resource constrained settings, we propose a class of enrichment sampling designs, where selection for abstraction is stratified by auxiliary variables related to the true outcome of interest. Stratified sampling on highly specific variables results in targeted samples that are more enriched with cases, which we show translates to increased model discrimination and better statistical learning performance. We provide mathematical details, and simulation evidence that links sampling designs to their resulting prediction model performance. We discuss the impact of our proposed sampling on both model training and validation. Finally, we illustrate the proposed designs for outcome label collection and subsequent machine-learning, using radiology report text data from the Lumbar Imaging with Reporting of Epidemiology (LIRE) study.
△ Less
Submitted 5 November, 2020; v1 submitted 31 March, 2019;
originally announced April 2019.
-
Momentum-dependent power law measured in an interacting quantum wire beyond the Luttinger limit
Authors:
Y. **,
O. Tsyplyatyev,
M. Moreno,
A. Anthore,
W. K. Tan,
J. P. Griffiths,
I. Farrer,
D. A. Ritchie,
L. I. Glazman,
A. J. Schofield,
C. J. B. Ford
Abstract:
Power laws in physics have until now always been associated with a scale invariance originating from the absence of a length scale. Recently, an emergent invariance even in the presence of a length scale has been predicted by the newly-developed nonlinear-Luttinger-liquid theory for a one-dimensional (1D) quantum fluid at finite energy and momentum, at which the particle's wavelength provides the…
▽ More
Power laws in physics have until now always been associated with a scale invariance originating from the absence of a length scale. Recently, an emergent invariance even in the presence of a length scale has been predicted by the newly-developed nonlinear-Luttinger-liquid theory for a one-dimensional (1D) quantum fluid at finite energy and momentum, at which the particle's wavelength provides the length scale. We present the first experimental example of this new type of power law in the spectral function of interacting electrons in a quantum wire using a transport-spectroscopy technique. The observed momentum dependence of the power law in the high-energy region matches the theoretical predictions, supporting not only the 1D theory of interacting particles beyond the linear regime but also the existence of a new type of universality that emerges at finite energy and momentum.
△ Less
Submitted 8 November, 2018;
originally announced November 2018.
-
Nature of the many-body excitations in a quantum wire: theory and experiment
Authors:
O. Tsyplyatyev,
A. J. Schofield,
Y. **,
M. Moreno,
W. K. Tan,
A. S. Anirban,
C. J. B. Ford,
J. P. Griffiths,
I. Farrer,
G. A. C. Jones,
D. A. Ritchie
Abstract:
The natural excitations of an interacting one-dimensional system at low energy are hydrodynamic modes of Luttinger liquid, protected by the Lorentz invariance of the linear dispersion. We show that beyond low energies, where quadratic dispersion reduces the symmetry to Galilean, the main character of the many-body excitations changes into a hierarchy: calculations of dynamic correlation functions…
▽ More
The natural excitations of an interacting one-dimensional system at low energy are hydrodynamic modes of Luttinger liquid, protected by the Lorentz invariance of the linear dispersion. We show that beyond low energies, where quadratic dispersion reduces the symmetry to Galilean, the main character of the many-body excitations changes into a hierarchy: calculations of dynamic correlation functions for fermions (without spin) show that the spectral weights of the excitations are proportional to powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions and $L$ is the system length. Thus only small numbers of excitations carry the principal spectral power in representative regions on the energy-momentum planes. We have analysed the spectral function in detail and have shown that the first-level (strongest) excitations form a mode with parabolic dispersion, like that of a renormalised single particle. The second-level excitations produce a singular power-law line shape to the first-level mode and multiple power-laws at the spectral edge. We have illustrated crossover to Luttinger liquid at low energy by calculating the local density of state through all energy scales: from linear to non-linear, and to above the chemical potential energies. In order to test this model, we have carried out experiments to measure momentum-resolved tunnelling of electrons (fermions with spin) from/to a wire formed within a GaAs heterostructure. We observe well-resolved spin-charge separation at low energy with appreciable interaction strength and only a parabolic dispersion of the first-level mode at higher energies. We find structure resembling the second-level excitations, which dies away rapidly at high momentum in line with the theoretical predictions here.
△ Less
Submitted 28 August, 2015;
originally announced August 2015.
-
Hierarchy of modes in an interacting system
Authors:
O. Tsyplyatyev,
A. J. Schofield,
Y. **,
M. Moreno,
W. K. Tan,
C. J. B. Ford,
J. P. Griffiths,
I. Farrer,
G. A. C. Jones,
D. A. Ritchie
Abstract:
Studying interacting fermions in 1D at high energy, we find a hierarchy in the spectral weights of the excitations theoretically and we observe evidence for second-level excitations experimentally. Diagonalising a model of fermions (without spin), we show that levels of the hierarchy are separated by powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions a…
▽ More
Studying interacting fermions in 1D at high energy, we find a hierarchy in the spectral weights of the excitations theoretically and we observe evidence for second-level excitations experimentally. Diagonalising a model of fermions (without spin), we show that levels of the hierarchy are separated by powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions and $L$ is the system length. The first-level (strongest) excitations form a mode with parabolic dispersion, like that of a renormalised single particle. The second-level excitations produce a singular power-law line shape to the first-level mode and multiple power-laws at the spectral edge. We measure momentum-resolved tunnelling of electrons (fermions with spin) from/to a wire formed within a GaAs heterostructure, which shows parabolic dispersion of the first-level mode and well-resolved spin-charge separation at low energy with appreciable interaction strength. We find structure resembling the second-level excitations, which dies away quite rapidly at high momentum.
△ Less
Submitted 13 August, 2014;
originally announced August 2014.
