-
Fermilab Booster Beam Emittances from Quadrupole Modes Measured by BPMs
Authors:
C. Y. Tan,
M. Balcewicz
Abstract:
The measurement of beam emittances by extracting the quadrupole mode signal from a 4 plate beam position monitor (BPM) was published at least 40 years ago. Unfortunately, in practice, this method suffers from poor signal to noise ratio and requires a lot of tuning to extract out the emittances. In this paper, an improved method where multiple BPMs are used together with better mathematical analysi…
▽ More
The measurement of beam emittances by extracting the quadrupole mode signal from a 4 plate beam position monitor (BPM) was published at least 40 years ago. Unfortunately, in practice, this method suffers from poor signal to noise ratio and requires a lot of tuning to extract out the emittances. In this paper, an improved method where multiple BPMs are used together with better mathematical analysis is described. The BPM derived emittances are then compared with those measured by the Ion Profile Monitor (IPM). Surprisingly, the BPM measured emittances behave very well and are more realistic than those measured by the IPM.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Tactile Aware Dynamic Obstacle Avoidance in Crowded Environment with Deep Reinforcement Learning
Authors:
Yung Chuen Ng,
Qi Wen,
Lim,
Chun Ye Tan,
Zhen Hao Gan,
Meng Yee,
Chuah
Abstract:
Mobile robots operating in crowded environments require the ability to navigate among humans and surrounding obstacles efficiently while adhering to safety standards and socially compliant mannerisms. This scale of the robot navigation problem may be classified as both a local path planning and trajectory optimization problem. This work presents an array of force sensors that act as a tactile laye…
▽ More
Mobile robots operating in crowded environments require the ability to navigate among humans and surrounding obstacles efficiently while adhering to safety standards and socially compliant mannerisms. This scale of the robot navigation problem may be classified as both a local path planning and trajectory optimization problem. This work presents an array of force sensors that act as a tactile layer to complement the use of a LiDAR for the purpose of inducing awareness of contact with any surrounding objects within immediate vicinity of a mobile robot undetected by LiDARs. By incorporating the tactile layer, the robot can take more risks in its movements and possibly go right up to an obstacle or wall, and gently squeeze past it. In addition, we built up a simulation platform via Pybullet which integrates Robot Operating System (ROS) and reinforcement learning (RL) together. A touch-aware neural network model was trained on it to create an RL-based local path planner for dynamic obstacle avoidance. Our proposed method was demonstrated successfully on an omni-directional mobile robot who was able to navigate in a crowded environment with high agility and versatility in movement, while not being overly sensitive to nearby obstacles-not-in-contact.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Project Dinos I: A joint lensing-dynamics constraint on the deviation from the power law in the mass profile of massive ellipticals
Authors:
Chin Yi Tan,
Anowar J. Shajib,
Simon Birrer,
Alessandro Sonnenfeld,
Tommaso Treu,
Patrick Wells,
Devon Williams,
Elizabeth J. Buckley-Geer,
Alex Drlica-Wagner,
Joshua Frieman
Abstract:
The mass distribution in massive elliptical galaxies encodes their evolutionary history, thus providing an avenue to constrain the baryonic astrophysics in their evolution. The power-law assumption for the radial mass profile in ellipticals has been sufficient to describe several observables to the noise level, including strong lensing and stellar dynamics. In this paper, we quantitatively constra…
▽ More
The mass distribution in massive elliptical galaxies encodes their evolutionary history, thus providing an avenue to constrain the baryonic astrophysics in their evolution. The power-law assumption for the radial mass profile in ellipticals has been sufficient to describe several observables to the noise level, including strong lensing and stellar dynamics. In this paper, we quantitatively constrained any deviation, or the lack thereof, from the power-law mass profile in massive ellipticals through joint lensing-dynamics analysis of a large statistical sample with 77 galaxy-galaxy lens systems. We performed an improved and uniform lens modelling of these systems from archival Hubble Space Telescope imaging using the automated lens modelling pipeline dolphin. We combined the lens model posteriors with the stellar dynamics to constrain the deviation from the power law after accounting for the line-of-sight lensing effects, a first for analyses on galaxy-galaxy lenses. We find that the Sloan Lens ACS Survey (SLACS) lens galaxies with a mean redshift of 0.2 are consistent with the power-law profile within 1.1$σ$ (2.8$σ$) and the Strong Lensing Legacy Survey (SL2S) lens galaxies with a mean redshift of 0.6 are consistent within 0.8$σ$ (2.1$σ$), for a spatially constant (Osipkov-Merritt) stellar anisotropy profile. We adopted the spatially constant anisotropy profile as our baseline choice based on previous dynamical observables of local ellipticals. However, spatially resolved stellar kinematics of lens galaxies are necessary to differentiate between the two anisotropy models. Future studies will use our lens models to constrain the mass distribution individually in the dark matter and baryonic components.
△ Less
Submitted 18 April, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
Electron Cloud Measurements in Fermilab Booster
Authors:
S. A. K. Wijethunga,
N. Eddy,
J. Eldred,
C. Y. Tan,
B. Fellenz,
E. Pozdeyev,
R. V. Sharankova
Abstract:
Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilab's Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple t…
▽ More
Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilab's Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns inside the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is important to measure the presence of electron cloud. The presence or apparent absence of the electron cloud was investigated using two different methods: measuring bunch-by-bunch tune shift by changing the bunch train structure at different intensities and propagating a microwave carrier signal through the beampipe and analyzing the phase modulation of the signal. This paper presents the results of the two methods and corresponding simulation results conducted using PyECLOUD software.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Exploiting Frequency Spectrum of Adversarial Images for General Robustness
Authors:
Chun Yang Tan,
Kazuhiko Kawamoto,
Hiroshi Kera
Abstract:
In recent years, there has been growing concern over the vulnerability of convolutional neural networks (CNNs) to image perturbations. However, achieving general robustness against different types of perturbations remains challenging, in which enhancing robustness to some perturbations (e.g., adversarial perturbations) may degrade others (e.g., common corruptions). In this paper, we demonstrate th…
▽ More
In recent years, there has been growing concern over the vulnerability of convolutional neural networks (CNNs) to image perturbations. However, achieving general robustness against different types of perturbations remains challenging, in which enhancing robustness to some perturbations (e.g., adversarial perturbations) may degrade others (e.g., common corruptions). In this paper, we demonstrate that adversarial training with an emphasis on phase components significantly improves model performance on clean, adversarial, and common corruption accuracies. We propose a frequency-based data augmentation method, Adversarial Amplitude Swap, that swaps the amplitude spectrum between clean and adversarial images to generate two novel training images: adversarial amplitude and adversarial phase images. These images act as substitutes for adversarial images and can be implemented in various adversarial training setups. Through extensive experiments, we demonstrate that our method enables the CNNs to gain general robustness against different types of perturbations and results in a uniform performance against all types of common corruptions.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Identification of Galaxy-Galaxy Strong Lens Candidates in the DECam Local Volume Exploration Survey Using Machine Learning
Authors:
E. A. Zaborowski,
A. Drlica-Wagner,
F. Ashmead,
J. F. Wu,
R. Morgan,
C. R. Bom,
A. J. Shajib,
S. Birrer,
W. Cerny,
L. Buckley-Geer,
B. Mutlu-Pakdil,
P. S. Ferguson,
K. Glazebrook,
S. J. Gonzalez Lozano,
Y. Gordon,
M. Martinez,
V. Manwadkar,
J. O'Donnell,
J. Poh,
A. Riley,
J. D. Sakowska,
L. Santana-Silva,
B. X. Santiago,
D. Sluse,
C. Y. Tan
, et al. (66 additional authors not shown)
Abstract:
We perform a search for galaxy-galaxy strong lens systems using a convolutional neural network (CNN) applied to imaging data from the first public data release of the DECam Local Volume Exploration Survey (DELVE), which contains $\sim 520$ million astronomical sources covering $\sim 4,000$ $\mathrm{deg}^2$ of the southern sky to a $5σ$ point-source depth of $g=24.3$, $r=23.9$, $i=23.3$, and…
▽ More
We perform a search for galaxy-galaxy strong lens systems using a convolutional neural network (CNN) applied to imaging data from the first public data release of the DECam Local Volume Exploration Survey (DELVE), which contains $\sim 520$ million astronomical sources covering $\sim 4,000$ $\mathrm{deg}^2$ of the southern sky to a $5σ$ point-source depth of $g=24.3$, $r=23.9$, $i=23.3$, and $z=22.8$ mag. Following the methodology of similar searches using DECam data, we apply color and magnitude cuts to select a catalog of $\sim 11$ million extended astronomical sources. After scoring with our CNN, the highest scoring 50,000 images were visually inspected and assigned a score on a scale from 0 (definitely not a lens) to 3 (very probable lens). We present a list of 581 strong lens candidates, 562 of which are previously unreported. We categorize our candidates using their human-assigned scores, resulting in 55 Grade A candidates, 149 Grade B candidates, and 377 Grade C candidates. We additionally highlight eight potential quadruply lensed quasars from this sample. Due to the location of our search footprint in the northern Galactic cap ($b > 10$ deg) and southern celestial hemisphere (${\rm Dec.}<0$ deg), our candidate list has little overlap with other existing ground-based searches. Where our search footprint does overlap with other searches, we find a significant number of high-quality candidates which were previously unidentified, indicating a degree of orthogonality in our methodology. We report properties of our candidates including apparent magnitude and Einstein radius estimated from the image separation.
△ Less
Submitted 25 August, 2023; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Operation of the H- Linac at FNAL
Authors:
K. Seiya,
T. Butler,
D. Jones,
V. Kapin,
K. Hartman,
S. Moua,
J. -F. Ostiguy,
R. Ridgway,
R. Sharankova,
B. Stanzil,
C. Y. Tan,
J. Walters,
M. Wesley,
M. Mwaniki
Abstract:
The Fermi National Accelerator Laboratory (FNAL) Linac has been in operation for 52 years. In approximately four years, it will be replaced by a new 800 MeV superconducting machine, the PIP-II SRF Linac. In the current configuration, the Linac delivers H- ions at 400 MeV and injects protons by charge exchange into the Booster synchrotron. Despite its age, the Linac is the most stable accelerator i…
▽ More
The Fermi National Accelerator Laboratory (FNAL) Linac has been in operation for 52 years. In approximately four years, it will be replaced by a new 800 MeV superconducting machine, the PIP-II SRF Linac. In the current configuration, the Linac delivers H- ions at 400 MeV and injects protons by charge exchange into the Booster synchrotron. Despite its age, the Linac is the most stable accelerator in the FNAL complex, reliably sending 22 mA in daily operations. We will discuss the status of the operation, beam studies, and plans.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
Electron Cloud Measurements in Fermilab Booster
Authors:
S. A. K. Wijethunga,
J. Eldred,
C. Y. Tan,
E. Pozdeyev
Abstract:
Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilabs Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple tu…
▽ More
Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilabs Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns in the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is essential to discover any existence of an electron cloud. And if it does, its effects on the PIP-II era Booster and its mitigating techniques. As the first step, the presence or absence of the electron cloud was investigated using the clearing bunch technique. This paper presents experimental details and observations of the bunch-by-bunch tune shifts of beams with various bunch train structures at low and high intensities and simulation results conducted using PyECLOUD.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
The DECam Local Volume Exploration Survey Data Release 2
Authors:
A. Drlica-Wagner,
P. S. Ferguson,
M. Adamów,
M. Aguena,
F. Andrade-Oliveira,
D. Bacon,
K. Bechtol,
E. F. Bell,
E. Bertin,
P. Bilaji,
S. Bocquet,
C. R. Bom,
D. Brooks,
D. L. Burke,
J. A. Carballo-Bello,
J. L. Carlin,
A. Carnero Rosell,
M. Carrasco Kind,
J. Carretero,
F. J. Castander,
W. Cerny,
C. Chang,
Y. Choi,
C. Conselice,
M. Costanzi
, et al. (99 additional authors not shown)
Abstract:
We present the second public data release (DR2) from the DECam Local Volume Exploration survey (DELVE). DELVE DR2 combines new DECam observations with archival DECam data from the Dark Energy Survey, the DECam Legacy Survey, and other DECam community programs. DELVE DR2 consists of ~160,000 exposures that cover >21,000 deg^2 of the high Galactic latitude (|b| > 10 deg) sky in four broadband optica…
▽ More
We present the second public data release (DR2) from the DECam Local Volume Exploration survey (DELVE). DELVE DR2 combines new DECam observations with archival DECam data from the Dark Energy Survey, the DECam Legacy Survey, and other DECam community programs. DELVE DR2 consists of ~160,000 exposures that cover >21,000 deg^2 of the high Galactic latitude (|b| > 10 deg) sky in four broadband optical/near-infrared filters (g, r, i, z). DELVE DR2 provides point-source and automatic aperture photometry for ~2.5 billion astronomical sources with a median 5σ point-source depth of g=24.3, r=23.9, i=23.5, and z=22.8 mag. A region of ~17,000 deg^2 has been imaged in all four filters, providing four-band photometric measurements for ~618 million astronomical sources. DELVE DR2 covers more than four times the area of the previous DELVE data release and contains roughly five times as many astronomical objects. DELVE DR2 is publicly available via the NOIRLab Astro Data Lab science platform.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Versatile Multi-MW Proton Facility with Synchrotron Upgrade of Fermilab Proton Complex
Authors:
J. Eldred,
R. Ainsworth,
Y. Alexahin,
C. Bhat,
S. Chattopadhyay,
P. Derwent,
D. Johnson,
C. Johnstone,
J. Johnstone,
I. Kourbanis,
V. Lebedev,
S. Nagaitsev,
W. Pellico,
E. Pozdeyev,
V. Shiltsev,
M. Syphers,
C. Y. Tan,
A. Valishev,
R. Zwaska
Abstract:
DUNE/LBNF constitutes an international multi-decadal physics program for leading-edge neutrino science and proton decay studies [1] and is expected to serve as the flagship particle experiment based at Fermilab.
DUNE/LBNF constitutes an international multi-decadal physics program for leading-edge neutrino science and proton decay studies [1] and is expected to serve as the flagship particle experiment based at Fermilab.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Adversarial amplitude swap towards robust image classifiers
Authors:
Chun Yang Tan,
Kazuhiko Kawamoto,
Hiroshi Kera
Abstract:
The vulnerability of convolutional neural networks (CNNs) to image perturbations such as common corruptions and adversarial perturbations has recently been investigated from the perspective of frequency. In this study, we investigate the effect of the amplitude and phase spectra of adversarial images on the robustness of CNN classifiers. Extensive experiments revealed that the images generated by…
▽ More
The vulnerability of convolutional neural networks (CNNs) to image perturbations such as common corruptions and adversarial perturbations has recently been investigated from the perspective of frequency. In this study, we investigate the effect of the amplitude and phase spectra of adversarial images on the robustness of CNN classifiers. Extensive experiments revealed that the images generated by combining the amplitude spectrum of adversarial images and the phase spectrum of clean images accommodates moderate and general perturbations, and training with these images equips a CNN classifier with more general robustness, performing well under both common corruptions and adversarial perturbations. We also found that two types of overfitting (catastrophic overfitting and robust overfitting) can be circumvented by the aforementioned spectrum recombination. We believe that these results contribute to the understanding and the training of truly robust classifiers.
△ Less
Submitted 1 April, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
A Fourier method for the determination of focus for telescopes with stars
Authors:
C. Y. Tan,
B. Schulz
Abstract:
We introduce a Fourier method (Fm) for the determination of best focus for telescopes with stars. Our method fits a power function, that we will derive in this paper, to a set of images taken as a function of focuser position. The best focus position is where the power is maximum. Fm was first tested with small refractor and Schmidt-Cassegrain (SCT) telescopes. After the successful small telescope…
▽ More
We introduce a Fourier method (Fm) for the determination of best focus for telescopes with stars. Our method fits a power function, that we will derive in this paper, to a set of images taken as a function of focuser position. The best focus position is where the power is maximum. Fm was first tested with small refractor and Schmidt-Cassegrain (SCT) telescopes. After the successful small telescope tests, we then tested Fm with a 2 m Ritchey-Chrétien-Coudé (RCC). Our tests show that Fm is immune to the problems inherent in the popular half-flux diameter method.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
Recent Improvements in the Beam Capture at Fermilab Booster for High Intensity Operation
Authors:
C. M. Bhat†,
S. J. Chaurize,
P. Derwent,
M. W. Domeier,
V. Grzelak,
W. Pellico,
J. Reid,
B. A. Schupbach,
C. Y. Tan,
A. K. Triplett
Abstract:
The Fermilab Booster uses multi-turn beam injection with all its cavities phased such that beam sees a net zero RF voltage even when each station is at the same maxi-mum voltage. During beam capture the RF voltage is increased slowly by using its paraphase system. At the end of the capture the feedback is turned on for beam acceleration. It is vital for present operations as well as during the PIP…
▽ More
The Fermilab Booster uses multi-turn beam injection with all its cavities phased such that beam sees a net zero RF voltage even when each station is at the same maxi-mum voltage. During beam capture the RF voltage is increased slowly by using its paraphase system. At the end of the capture the feedback is turned on for beam acceleration. It is vital for present operations as well as during the PIP-II era that both the HLRF and LLRF systems provide the proper intended phase and RF voltage to preserve the longitudinal emittance from injection to extraction. In this paper, we describe the original architecture of the cavity phase distribution, our recent beam-based RF phase measurements, observed significant deviation in the relative phases between cavities and correction effort. Results from the improved capture for high intensity beam are also presented.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Trajectories of long duration balloons launched from McMurdo Station in Antarctica
Authors:
Christopher Geach,
Shaul Hanany,
Chiou Yang Tan,
Xin Zhi Tan
Abstract:
The Columbia Scientific Ballooning Facility operates stratospheric balloon flights out of McMurdo Station in Antarctica. We use balloon trajectory data from 40 flights between 1991 and 2016 to give the first quantification of trajectory statistics. We provide the probabilities as a function of time for the payload to be between given latitudes, and we quantify the southernmost and northernmost lat…
▽ More
The Columbia Scientific Ballooning Facility operates stratospheric balloon flights out of McMurdo Station in Antarctica. We use balloon trajectory data from 40 flights between 1991 and 2016 to give the first quantification of trajectory statistics. We provide the probabilities as a function of time for the payload to be between given latitudes, and we quantify the southernmost and northernmost latitudes a payload is likely to attain. We find that for the median flight duration of 19 days, there is 90% probability the balloon would drift as far south as $88^{\circ}$S or as far north as $71^{\circ}$S; shorter flights are likely to experience smaller ranges in latitude. These statistics, which are available digitally in the public domain, will enable scientists planning future balloon flights make informed decisions during both mission design and execution.
△ Less
Submitted 20 May, 2021; v1 submitted 10 May, 2021;
originally announced May 2021.
-
Foil Scattering Model for Fermilab Booster
Authors:
J. Eldred,
C. M. Bhat,
S. Chaurize,
V. Lebedev,
S. Nagaitsev,
K. Seiya,
C. Y. Tan,
R. J. Tesarek
Abstract:
At the Fermilab Booster, and many other proton facili-ties, an intense proton beam is accumulated by multi-turn injection of an H- beam through a strip** foil. The circu-lating beam scatters off the injection foil and large-angle Coulomb scattering leads to uncontrolled losses concen-trated in the first betatron period. We measure the foil scat-tering loss rate in the Fermilab Booster as a funct…
▽ More
At the Fermilab Booster, and many other proton facili-ties, an intense proton beam is accumulated by multi-turn injection of an H- beam through a strip** foil. The circu-lating beam scatters off the injection foil and large-angle Coulomb scattering leads to uncontrolled losses concen-trated in the first betatron period. We measure the foil scat-tering loss rate in the Fermilab Booster as a function of LINAC current, number of injection turns, and time on the injection foil. We find that current Booster operation has ~1% foil scattering loss and we make projections for the Proton Improvement Plan II (PIP-II) injector upgrade. Here we present the results from our recent beam measure-ments and a foil scattering model analyses.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Structural Change Analysis of Active Cryptocurrency Market
Authors:
C. Y. Tan,
Y. B. Koh,
K. H. Ng,
K. H. Ng
Abstract:
Structural Change Analysis of Active Cryptocurrency Market
Structural Change Analysis of Active Cryptocurrency Market
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
The FNAL Booster 2nd Harmonic RF Cavity
Authors:
R. Madrak,
J. Dey,
K. Duel,
M. Kufer,
J. Kuharik,
A. Makarov,
R. Padilla,
W. Pellico,
J. Reid,
G. Romanov,
M. Slabaugh,
D. Sun,
C. Y. Tan,
I. Terechkine
Abstract:
A second harmonic RF cavity which uses perpendicularly biased garnet for frequency tuning is currently being constructed for use in the Fermilab Booster. The cavity will operate at twice the fundamental RF frequency, from ~76 - 106 MHz, and will be turned on only during injection, and transition or extraction. Its main purpose is to reduce beam loss as required by Fermilab's Proton Improvement Pla…
▽ More
A second harmonic RF cavity which uses perpendicularly biased garnet for frequency tuning is currently being constructed for use in the Fermilab Booster. The cavity will operate at twice the fundamental RF frequency, from ~76 - 106 MHz, and will be turned on only during injection, and transition or extraction. Its main purpose is to reduce beam loss as required by Fermilab's Proton Improvement Plan (PIP). After three years of optimization and study, the cavity design has been finalized and all constituent parts have been received. We discuss the design aspects of the cavity and its associated systems, component testing, and status of the cavity construction.
△ Less
Submitted 28 August, 2018;
originally announced August 2018.
-
Garnet Ring Measurements For The Fermilab Booster 2nd Harmonic Cavity
Authors:
J. Kuharik,
J. Dey,
K. Duel,
R. Madrak,
A. Makarov,
W. Pellico,
J. Reid,
G. Romanov,
M. Slabaugh,
D. Sun,
C. Y. Tan,
I. Terechkine
Abstract:
A perpendicularly biased tuneable 2nd harmonic cavity is being constructed for use in the Fermilab Booster. The cavity's tuner uses National Magnetics AL800 garnet as the tuning media. For quality control, the magnetic properties of the material and the uniformity of the properties within the tuner must be assessed. We describe two tests which are performed on the rings and on their corresponding…
▽ More
A perpendicularly biased tuneable 2nd harmonic cavity is being constructed for use in the Fermilab Booster. The cavity's tuner uses National Magnetics AL800 garnet as the tuning media. For quality control, the magnetic properties of the material and the uniformity of the properties within the tuner must be assessed. We describe two tests which are performed on the rings and on their corresponding witness samples.
△ Less
Submitted 14 June, 2018;
originally announced June 2018.
-
Implementation of Design Changes Towards a More Reliable, Hands-off Magnetron Ion Source
Authors:
A. Sosa,
D. S. Bollinger,
P. R. Karns,
C. Y. Tan
Abstract:
As the main $H^{-}$ ion source for the accelerator complex, magnetron ion sources have been used at Fermilab since the 1970s. At the offline test stand, new R&D is carried out to develop and upgrade the present magnetron-type sources of $H^{-}$ ions of up to 80 mA and 35 keV beam energy in the context of the Proton Improvement Plan. The aim of this plan is to provide high-power proton beams for th…
▽ More
As the main $H^{-}$ ion source for the accelerator complex, magnetron ion sources have been used at Fermilab since the 1970s. At the offline test stand, new R&D is carried out to develop and upgrade the present magnetron-type sources of $H^{-}$ ions of up to 80 mA and 35 keV beam energy in the context of the Proton Improvement Plan. The aim of this plan is to provide high-power proton beams for the experiments at FNAL. In order to reduce the amount of tuning and monitoring of these ion sources, a new electronic system consisting of a current-regulated arc discharge modulator allow the ion source to run at a constant arc current for improved beam output and operation. A solenoid-type gas valve feeds $H_{2}$ gas into the source precisely and independently of ambient temperature. This summary will cover several studies and design changes that have been tested and will eventually be implemented on the operational magnetron sources at Fermilab. Innovative results for this type of ion source include cathode geometries, solenoid gas valves, current controlled arc pulser, cesium boiler redesign, gas mixtures of hydrogen and nitrogen, and duty factor reduction, with the aim to improve source lifetime, stability, and reducing the amount of tuning needed. In this summary, I will highlight the advances made in ion sources at Fermilab and will outline the directions of the continuing R&D effort.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Progress on the design of a perpendicularly biased 2nd harmonic cavity for the Fermilab Booster
Authors:
R. L. Madrak,
J. E. Dey,
K. L. Duel,
J. C. Kuharik,
W. A. Pellico,
J. S. Reid,
G. Romanov,
M. Slabaugh,
D. Sun,
C. Y. Tan,
I. Terechkine
Abstract:
A perpendicularly biased 2nd harmonic cavity is being designed and built for the Fermilab Booster. Its purpose is to flatten the bucket at injection and thus change the longitudinal beam distribution to decrease space charge effects. It can also help at extraction. The cavity frequency range is 76 - 106 MHz. The power amplifier will be built using the Y567B tetrode, which is also used for the fund…
▽ More
A perpendicularly biased 2nd harmonic cavity is being designed and built for the Fermilab Booster. Its purpose is to flatten the bucket at injection and thus change the longitudinal beam distribution to decrease space charge effects. It can also help at extraction. The cavity frequency range is 76 - 106 MHz. The power amplifier will be built using the Y567B tetrode, which is also used for the fundamental mode cavities in the Fermilab Booster. We discuss recent progress on the cavity, the biasing solenoid design and plans for testing the tuner's garnet material.
△ Less
Submitted 27 December, 2017;
originally announced December 2017.
-
Static Magnetization Properties Of AL800 Garnet Material
Authors:
J. Kuharik,
R. Madrak,
A. Makarov,
W. Pellico,
S. Sun,
C. Y. Tan,
I. Terechkine
Abstract:
A second harmonic tunable RF cavity is being developed for the Fermilab Booster. This device, which promises reduction of the particle beam loss at the injection, transition, and extraction stages, employs perpendicularly biased garnet material for frequency tuning. The required range of the tuning is significantly wider than in previously built and tested tunable RF devices. As a result, the magn…
▽ More
A second harmonic tunable RF cavity is being developed for the Fermilab Booster. This device, which promises reduction of the particle beam loss at the injection, transition, and extraction stages, employs perpendicularly biased garnet material for frequency tuning. The required range of the tuning is significantly wider than in previously built and tested tunable RF devices. As a result, the magnetic field in the garnet comes fairly close to the gyromagnetic resonance line at the lower end of the frequency range. The chosen design concept of a tuner for the cavity cannot ensure uniform magnetic field in the garnet material; thus, it is important to know the static magnetic properties of the material to avoid significant increase in the local RF loss power density. This report summarizes studies performed at Fermilab to understand variations in the magnetic properties of the AL800 garnet material used to build the tuner of the cavity.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Exploring Cosmic Origins with CORE: Survey requirements and mission design
Authors:
J. Delabrouille,
P. de Bernardis,
F. R. Bouchet,
A. Achúcarro,
P. A. R. Ade,
R. Allison,
F. Arroja,
E. Artal,
M. Ashdown,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. Banerji,
D. Barbosa,
J. Bartlett,
N. Bartolo,
S. Basak,
J. J. A. Baselmans,
K. Basu,
E. S. Battistelli,
R. Battye,
D. Baumann,
A. Benoît,
M. Bersanelli,
A. Bideaud
, et al. (178 additional authors not shown)
Abstract:
Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology. In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the CORE space mission proposed to ESA in answer to the "M5" call for a medium…
▽ More
Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology. In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the CORE space mission proposed to ESA in answer to the "M5" call for a medium-sized mission. The rationale and options, and the methodologies used to assess the mission's performance, are of interest to other future CMB mission design studies. CORE is designed as a near-ultimate CMB polarisation mission which, for optimal complementarity with ground-based observations, will perform the observations that are known to be essential to CMB polarisation scienceand cannot be obtained by any other means than a dedicated space mission.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
-
Exploring Cosmic Origins with CORE: The Instrument
Authors:
P. de Bernardis,
P. A. R. Ade,
J. J. A. Baselmans,
E. S. Battistelli,
A. Benoit,
M. Bersanelli,
A. Bideaud,
M. Calvo,
F. J. Casas,
G. Castellano,
A. Catalano,
I. Charles,
I. Colantoni,
F. Columbro,
A. Coppolecchia,
M. Crook,
G. D'Alessandro,
M. De Petris,
J. Delabrouille,
S. Doyle,
C. Franceschet,
A. Gomez,
J. Goupy,
S. Hanany,
M. Hills
, et al. (104 additional authors not shown)
Abstract:
We describe a space-borne, multi-band, multi-beam polarimeter aiming at a precise and accurate measurement of the polarization of the Cosmic Microwave Background. The instrument is optimized to be compatible with the strict budget requirements of a medium-size space mission within the Cosmic Vision Programme of the European Space Agency. The instrument has no moving parts, and uses arrays of diffr…
▽ More
We describe a space-borne, multi-band, multi-beam polarimeter aiming at a precise and accurate measurement of the polarization of the Cosmic Microwave Background. The instrument is optimized to be compatible with the strict budget requirements of a medium-size space mission within the Cosmic Vision Programme of the European Space Agency. The instrument has no moving parts, and uses arrays of diffraction-limited Kinetic Inductance Detectors to cover the frequency range from 60 GHz to 600 GHz in 19 wide bands, in the focal plane of a 1.2 m aperture telescope cooled at 40 K, allowing for an accurate extraction of the CMB signal from polarized foreground emission. The projected CMB polarization survey sensitivity of this instrument, after foregrounds removal, is 1.7 μK$\cdot$arcmin. The design is robust enough to allow, if needed, a downscoped version of the instrument covering the 100 GHz to 600 GHz range with a 0.8 m aperture telescope cooled at 85 K, with a projected CMB polarization survey sensitivity of 3.2 μK$\cdot$arcmin.
△ Less
Submitted 22 May, 2017; v1 submitted 5 May, 2017;
originally announced May 2017.
-
Improvements on the Stability and Operation of a Magnetron H- Ion Source
Authors:
A. Sosa,
D. S. Bollinger,
P. R. Karns,
C. Y. Tan
Abstract:
The magnetron H- ion sources developed in the 1970s currently in operation at Fermilab provide beam to the rest of the accelerator complex. A series of modifications to these sources have been tested in a dedicated offline test stand with the aim of improving different operational issues. The solenoid type gas valve was tested as an alternative to the piezoelectric gas valve in order to avoid its…
▽ More
The magnetron H- ion sources developed in the 1970s currently in operation at Fermilab provide beam to the rest of the accelerator complex. A series of modifications to these sources have been tested in a dedicated offline test stand with the aim of improving different operational issues. The solenoid type gas valve was tested as an alternative to the piezoelectric gas valve in order to avoid its temperature dependence. A new cesium oven was designed and tested in order to avoid glass pieces that were present with the previous oven, improve thermal insulation and fine tune its temperature. A current-regulated arc modulator was developed to run the ion source at a constant arc current, providing very stable beam outputs during operations. In order to reduce beam noise, the addition of small amounts of N2 gas was explored, as well as testing different cathode shapes with increasing plasma volume. This paper summarizes the studies and modifications done in the source over the last three years with the aim of improving its stability, reliability and overall performance.
△ Less
Submitted 6 January, 2017;
originally announced January 2017.
-
An Overview of the New Test Stand for H- Ion Sources at FNAL
Authors:
A. Sosa,
D. S. Bollinger,
K. Duel,
P. Karns,
W. Pellico,
C. Y. Tan
Abstract:
A new test stand at FNAL is being constructed to carry out experiments to develop and upgrade the present magnetron-type sources of H- ions of up to 80 mA at 35 keV in the context of the Proton Improvement Plan (PIP). The aim of this plan is to provide high-power proton beams for the experiments at FNAL. The technical details of the construction and layout of this test stand are presented, along w…
▽ More
A new test stand at FNAL is being constructed to carry out experiments to develop and upgrade the present magnetron-type sources of H- ions of up to 80 mA at 35 keV in the context of the Proton Improvement Plan (PIP). The aim of this plan is to provide high-power proton beams for the experiments at FNAL. The technical details of the construction and layout of this test stand are presented, along with a prospective set of diagnostics to monitor the sources.
△ Less
Submitted 5 November, 2015;
originally announced November 2015.
-
Beam studies for the Proton Improvement Plan (PIP) -- reducing beam loss at the Fermilab Booster
Authors:
K. Seiya,
C. M. Bhat,
D. E. Johnson,
V. V. Kapin,
W. A. Pellico,
C. Y. Tan,
R. J. Tesarek
Abstract:
The Fermilab Booster is being upgraded under the Proton Improvement Plan (PIP) to be capable of providing a proton flux of $2.25^{17}$ protons per hour. The intensity per cycle will remain at the present operational $4.3^{12}$ protons per pulse, however the Booster beam cycle rate is going to be increased from 7.5 Hz to 15 Hz. One of the biggest challenges is to maintain the present beam loss powe…
▽ More
The Fermilab Booster is being upgraded under the Proton Improvement Plan (PIP) to be capable of providing a proton flux of $2.25^{17}$ protons per hour. The intensity per cycle will remain at the present operational $4.3^{12}$ protons per pulse, however the Booster beam cycle rate is going to be increased from 7.5 Hz to 15 Hz. One of the biggest challenges is to maintain the present beam loss power while the doubling the beam flux. Under PIP, there has been a large effort in beam studies and simulations to better understand the mechanisms of the beam loss. The goal is to reduce it by half by correcting and controlling the beam dynamics and by improving operational systems through hardware upgrades. This paper is going to present the recent beam study results and status of the Booster operations.
△ Less
Submitted 4 November, 2015;
originally announced November 2015.
-
Beam Tests of Beampipe Coatings for Electron Cloud Mitigation in Fermilab Main Injector
Authors:
Michael Backfish,
Jeffrey Eldred,
Cheng Yang Tan,
Robert Zwaska
Abstract:
Electron cloud beam instabilities are an important consideration in virtually all high-energy particle accelerators and could pose a formidable challenge to forthcoming high-intensity accelerator upgrades. Dedicated tests have shown beampipe coatings dramatically reduce the density of electron cloud in particle accelerators. In this work, we evaluate the performance of titanium nitride, amorphous…
▽ More
Electron cloud beam instabilities are an important consideration in virtually all high-energy particle accelerators and could pose a formidable challenge to forthcoming high-intensity accelerator upgrades. Dedicated tests have shown beampipe coatings dramatically reduce the density of electron cloud in particle accelerators. In this work, we evaluate the performance of titanium nitride, amorphous carbon, and diamond-like carbon as beampipe coatings for the mitigation of electron cloud in the Fermilab Main Injector. Altogether our tests represent 2700 ampere-hours of proton operation spanning five years. Three electron cloud detectors, retarding field analyzers, are installed in a straight section and allow a direct comparison between the electron flux in the coated and uncoated stainless steel beampipe. We characterize the electron flux as a function of intensity up to a maximum of 50 trillion protons per cycle. Each beampipe material conditions in response to electron bombardment from the electron cloud and we track the changes in these materials as a function of time and the number of absorbed electrons. Contamination from an unexpected vacuum leak revealed a potential vulnerability in the amorphous carbon beampipe coating. We measure the energy spectrum of electrons incident on the stainless steel, titanium nitride and amorphous carbon beampipes. We find the electron cloud signal is highly sensitive to stray magnetic fields and bunch-length over the Main Injector ramp cycle. We conduct a complete survey of the stray magnetic fields at the test station and compare the electron cloud signal to that in a field-free region.
△ Less
Submitted 26 July, 2015;
originally announced July 2015.
-
Learning Instructor Intervention from MOOC Forums: Early Results and Issues
Authors:
Muthu Kumar Chandrasekaran,
Min-Yen Kan,
Bernard C. Y. Tan,
Kiruthika Ragupathi
Abstract:
With large student enrollment, MOOC instructors face the unique challenge in deciding when to intervene in forum discussions with their limited bandwidth. We study this problem of instructor intervention. Using a large sample of forum data culled from 61 courses, we design a binary classifier to predict whether an instructor should intervene in a discussion thread or not. By incorporating novel in…
▽ More
With large student enrollment, MOOC instructors face the unique challenge in deciding when to intervene in forum discussions with their limited bandwidth. We study this problem of instructor intervention. Using a large sample of forum data culled from 61 courses, we design a binary classifier to predict whether an instructor should intervene in a discussion thread or not. By incorporating novel information about a forum's type into the classification process, we improve significantly over the previous state-of-the-art.
We show how difficult this decision problem is in the real world by validating against indicative human judgment, and empirically show the problem's sensitivity to instructors' intervention preferences. We conclude this paper with our take on the future research issues in intervention.
△ Less
Submitted 27 April, 2015;
originally announced April 2015.
-
Graphene-Ferroelectric Hybrid Structure for Flexible Transparent Electrodes
Authors:
Guang-Xin Ni,
Yi Zheng,
Sukang Bae,
Chin Yaw Tan,
Orhan Kahya,
**g Wu,
Byung Hee Hong,
Kui Yao,
Barbaros Özyilmaz
Abstract:
Graphene has exceptional optical, mechanical and electrical properties, making it an emerging material for novel optoelectronics, photonics and for flexible transparent electrode applications. However, the relatively high sheet resistance of graphene is a major constrain for many of these applications. Here we propose a new approach to achieve low sheet resistance in large-scale CVD monolayer grap…
▽ More
Graphene has exceptional optical, mechanical and electrical properties, making it an emerging material for novel optoelectronics, photonics and for flexible transparent electrode applications. However, the relatively high sheet resistance of graphene is a major constrain for many of these applications. Here we propose a new approach to achieve low sheet resistance in large-scale CVD monolayer graphene using non-volatile ferroelectric polymer gating. In this hybrid structure, large-scale graphene is heavily doped up to 3{\times}1013 cm-2 by non-volatile ferroelectric dipoles, yielding a low sheet resistance of 120 Ω{\Box} at ambient conditions. The graphene-ferroelectric transparent conductors (GFeTCs) exhibit more than 95% transmittance from the visible to the near infrared range owing to the highly transparent nature of the ferroelectric polymer. Together with its excellent mechanical flexibility, chemical inertness and the simple fabrication process of ferroelectric polymers, the proposed GFeTCs represent a new route towards large-scale graphene based transparent electrodes and optoelectronics.
△ Less
Submitted 5 February, 2013;
originally announced February 2013.
-
Bucket shaking stops bunch dancing in Tevatron
Authors:
A. Burov,
C. Y. Tan
Abstract:
Bunches in Tevatron are known to be longitudinally unstable: their collective oscillations, also called "dancing bunches," persist without any signs of decay. Typically, a damper is used to stop these oscillations, but recently, it was theoretically predicted that the oscillations can be stabilized by means of small bucket shaking. Dedicated measurements in Tevatron have shown that this method doe…
▽ More
Bunches in Tevatron are known to be longitudinally unstable: their collective oscillations, also called "dancing bunches," persist without any signs of decay. Typically, a damper is used to stop these oscillations, but recently, it was theoretically predicted that the oscillations can be stabilized by means of small bucket shaking. Dedicated measurements in Tevatron have shown that this method does stop the dancing.
△ Less
Submitted 17 August, 2012;
originally announced August 2012.
-
A data acquisition system for longitudinal beam properties in a rapid cycling synchrotron
Authors:
J. Steimel,
C. Y. Tan
Abstract:
A longitudinal beam properties, data acquisition system has been commissioned to operate in the Fermilab booster ring. This system captures real time information including beam synchronous phase, bunch length, and coupled bunch instability amplitudes as the beam is accelerated from 400 MeV to 8 GeV in 33 ms. The system uses an off-the-shelf Tektronix oscilloscope running Labview software and a syn…
▽ More
A longitudinal beam properties, data acquisition system has been commissioned to operate in the Fermilab booster ring. This system captures real time information including beam synchronous phase, bunch length, and coupled bunch instability amplitudes as the beam is accelerated from 400 MeV to 8 GeV in 33 ms. The system uses an off-the-shelf Tektronix oscilloscope running Labview software and a synchronous pulse generator. This paper describes the hardware configuration and the software configuration used to optimize the data processing rate.
△ Less
Submitted 17 August, 2012;
originally announced August 2012.
-
The FNAL injector upgrade
Authors:
C. Y. Tan,
D. S. Bollinger,
K. L. Duel,
J. R. Lackey,
W. A. Pellico
Abstract:
The present FNAL H- injector has been operational since the 1970s and consists of two magnetron H- sources and two 750 keV Cockcroft-Walton Accelerators. In the upgrade, both slit-type magnetron sources will be replaced with circular aperture sources, and the Cockcroft-Waltons with a 200 MHz RFQ (radio frequency quadrupole). Operational experience at BNL (Brookhaven National Laboratory) has shown…
▽ More
The present FNAL H- injector has been operational since the 1970s and consists of two magnetron H- sources and two 750 keV Cockcroft-Walton Accelerators. In the upgrade, both slit-type magnetron sources will be replaced with circular aperture sources, and the Cockcroft-Waltons with a 200 MHz RFQ (radio frequency quadrupole). Operational experience at BNL (Brookhaven National Laboratory) has shown that the upgraded source and RFQ will be more reliable, improve beam quality and require less manpower than the present system.
△ Less
Submitted 15 August, 2012;
originally announced August 2012.
-
Bucket Shaking Stops Bunch Oscillations In The Tevatron
Authors:
C. Y. Tan,
A. Burov
Abstract:
Bunches in the Tevatron are known to exhibit longitudinal oscillations which persist indefinitely. These oscillations are colloquially called "dancing bunches". Although the dancing bunches do not cause single bunch emittance growth or beam loss at injection, it leads to bunch lengthening at collisions. In operations, a longitudinal damper has been built which stops this dance and damps out couple…
▽ More
Bunches in the Tevatron are known to exhibit longitudinal oscillations which persist indefinitely. These oscillations are colloquially called "dancing bunches". Although the dancing bunches do not cause single bunch emittance growth or beam loss at injection, it leads to bunch lengthening at collisions. In operations, a longitudinal damper has been built which stops this dance and damps out coupled bunch modes. Recent theoretical work predicts that the dance can also be stopped by an appropriate change in the bunch distribution. This paper shows the Tevatron experiments which support this theory.
△ Less
Submitted 2 November, 2011;
originally announced November 2011.
-
Expression of Interest for Neutrinos Scattering on Glass: NuSOnG
Authors:
NuSOnG Collaboration,
T. Adams,
L. Buge,
J. M. Conrad,
P. H. Fisher,
J. A. Formaggio,
A. de Gouvêa,
W. A. Loinaz1,
G. Karagiorgi,
T. R. Kobilarcik,
S. Kopp,
G. Kyle,
D. A. Mason,
R. Milner,
J. G. Morfín,
M. Nakamura,
D. Naples,
P. Nienaber,
F. I Olness,
J. F. Owens,
W. G. Seligman,
M. H. Shaevitz,
H. Schellman,
M. J. Syphers,
C. Y. Tan
, et al. (3 additional authors not shown)
Abstract:
We propose a 3500 ton (3000 ton fiducial volume) SiO_2 neutrino detector with sampling calorimetry, charged particle tracking, and muon spectrometers to run in a Tevatron Fixed Target Program. Improvements to the Fermilab accelerator complex should allow substantial increases in the neutrino flux over the previous NuTeV quad triplet beamline. With 4E19 protons on target/year, a 5 year run would…
▽ More
We propose a 3500 ton (3000 ton fiducial volume) SiO_2 neutrino detector with sampling calorimetry, charged particle tracking, and muon spectrometers to run in a Tevatron Fixed Target Program. Improvements to the Fermilab accelerator complex should allow substantial increases in the neutrino flux over the previous NuTeV quad triplet beamline. With 4E19 protons on target/year, a 5 year run would achieve event statistics more than 100 times higher than NuTeV. With 100 times the statistics of previous high energy neutrino experiments, the purely weak processes [ν_μ e^- \to ν_μ+ e^-] and [ν_μ e^- \to ν_e + μ^-] (inverse muon decay) can be measured with high accuracy for the first time. The inverse muon decay process is independent of strong interaction effects and can be used to significantly improve the flux normalization for all other processes. The high neutrino and antineutrino fluxes also make new searches for lepton flavor violation and neutral heavy leptons possible. In this document, we give a first look at the physics opportunities, detector and beam design, and calibration procedures.
△ Less
Submitted 28 July, 2009;
originally announced July 2009.
-
QCD Precision Measurements and Structure Function Extraction at a High Statistics, High Energy Neutrino Scattering Experiment: NuSOnG
Authors:
T. Adams,
P. Batra,
L. Bugel,
L. Camilleri,
J. M. Conrad,
A. de Gouvêa,
P. H. Fisher,
J. A. Formaggio,
J. Jenkins,
G. Karagiorgi,
T. R. Kobilarcik,
S. Kopp,
G. Kyle,
W. A. Loinaz,
D. A. Mason,
R. Milner,
R. Moore,
J. G. Morfín,
M. Nakamura,
D. Naples,
P. Nienaber,
F. I. Olness,
J. F. Owens,
S. F. Pate,
A. Pronin
, et al. (11 additional authors not shown)
Abstract:
We extend the physics case for a new high-energy, ultra-high statistics neutrino scattering experiment, NuSOnG (Neutrino Scattering On Glass) to address a variety of issues including precision QCD measurements, extraction of structure functions, and the derived Parton Distribution Functions (PDFs). This experiment uses a Tevatron-based neutrino beam to obtain a sample of Deep Inelastic Scatterin…
▽ More
We extend the physics case for a new high-energy, ultra-high statistics neutrino scattering experiment, NuSOnG (Neutrino Scattering On Glass) to address a variety of issues including precision QCD measurements, extraction of structure functions, and the derived Parton Distribution Functions (PDFs). This experiment uses a Tevatron-based neutrino beam to obtain a sample of Deep Inelastic Scattering (DIS) events which is over two orders of magnitude larger than past samples. We outline an innovative method for fitting the structure functions using a parameterized energy shift which yields reduced systematic uncertainties. High statistics measurements, in combination with improved systematics, will enable NuSOnG to perform discerning tests of fundamental Standard Model parameters as we search for deviations which may hint of "Beyond the Standard Model" physics.
△ Less
Submitted 18 June, 2009;
originally announced June 2009.
-
Terascale Physics Opportunities at a High Statistics, High Energy Neutrino Scattering Experiment: NuSOnG
Authors:
T. Adams,
P. Batra,
L. Bugel,
L. Camilleri,
J. M. Conrad,
A. de Gouvea,
P. H. Fisher,
J. A. Formaggio,
J. Jenkins,
G. Karagiorgi,
T. R. Kobilarcik,
S. Kopp,
G. Kyle,
W. A. Loinaz,
D. A. Mason,
R. Milner,
R. Moore,
J. G. Morfin,
M. Nakamura,
D. Naples,
P. Nienaber,
F. I Olness,
J. F. Owens,
S. F. Pate,
A. Pronin
, et al. (11 additional authors not shown)
Abstract:
This article presents the physics case for a new high-energy, ultra-high statistics neutrino scattering experiment, NuSOnG (Neutrino Scattering on Glass). This experiment uses a Tevatron-based neutrino beam to obtain over an order of magnitude higher statistics than presently available for the purely weak processes $ν_μ+e^- \to ν_μ+ e^-$ and $ν_μ+ e^- \to ν_e + μ^-$. A sample of Deep Inelastic S…
▽ More
This article presents the physics case for a new high-energy, ultra-high statistics neutrino scattering experiment, NuSOnG (Neutrino Scattering on Glass). This experiment uses a Tevatron-based neutrino beam to obtain over an order of magnitude higher statistics than presently available for the purely weak processes $ν_μ+e^- \to ν_μ+ e^-$ and $ν_μ+ e^- \to ν_e + μ^-$. A sample of Deep Inelastic Scattering events which is over two orders of magnitude larger than past samples will also be obtained. As a result, NuSOnG will be unique among present and planned experiments for its ability to probe neutrino couplings to Beyond the Standard Model physics. Many Beyond Standard Model theories physics predict a rich hierarchy of TeV-scale new states that can correct neutrino cross-sections, through modifications of $Zνν$ couplings, tree-level exchanges of new particles such as $Z^\prime$s, or through loop-level oblique corrections to gauge boson propagators. These corrections are generic in theories of extra dimensions, extended gauge symmetries, supersymmetry, and more. The sensitivity of NuSOnG to this new physics extends beyond 5 TeV mass scales. This article reviews these physics opportunities.
△ Less
Submitted 30 September, 2009; v1 submitted 3 March, 2008;
originally announced March 2008.
-
Improvement of dielectric loss of doped Ba0.5Sr0.5TiO3 thin films for tunable microwave devices
Authors:
K. B. Chong,
L. B. Kong,
LinFeng Chen,
L. Yan,
C. Y. Tan,
T. Yang,
C. K. Ong,
T. Osipowicz
Abstract:
Al2O3-Ba0.5Sr0.5TiO3 (Al2O3-BST) thin films, with different Al2O3 contents, were deposited on (100) LaAlO3 substrate by pulsed laser deposition (PLD) technique. The Al2O3-BST films was demosnstrated to be a suitable systems to fabricate ferroelectric thin films with low dielectric loss and higher figure of merit for tunable microwave devices. Pure BST thin films were also fabricated for comparis…
▽ More
Al2O3-Ba0.5Sr0.5TiO3 (Al2O3-BST) thin films, with different Al2O3 contents, were deposited on (100) LaAlO3 substrate by pulsed laser deposition (PLD) technique. The Al2O3-BST films was demosnstrated to be a suitable systems to fabricate ferroelectric thin films with low dielectric loss and higher figure of merit for tunable microwave devices. Pure BST thin films were also fabricated for comparison purpose. The films' structure and morphology were analyzed by X-ray diffractiopn and scanning electron microscopy, respectively; nad showed that the surface roughness for the Al2O3-BST films increased with the Al2O3 content. Apart from that, the broadening in the intensity peak in XRD result indicating the grain size of the Al2O3-BST films reduced with the increasing of Al2O3 dopant. We measured the dielctric properties of Al2O3-BST films with a home-made non-destructive dual resonator method at frequency ~ 7.7 GHZ. The effect of doped Al2O3 into BST thin films significantly reduced the dielectric constant, dielectric loss and tunability compare to pure BST thin film. Our result shows the figure of merit (K), used to compare the films with varied dielectric properties, increased with the Al2O3 content. Therefore Al2O3-BST films show the potential to be exploited in tunable microwave devices.
△ Less
Submitted 23 June, 2003; v1 submitted 28 May, 2003;
originally announced May 2003.
-
Pulsed Laser Deposition of LaAlO3-Ba0.5Sr0.5TiO3 Thin Films for Tunable Device Applications
Authors:
L. B. Kong,
L. Yan,
K. B. Chong,
C. Y. Tan,
L. F. Chen,
C. K. Ong
Abstract:
LaAlO3-Ba0.5Sr0.5TiO3 (LAO-BST) thin films, with different LAO contents, were deposited on Pt/Ti/SiO2/Si and (100) LaAlO3 substrate, via a pulsed laser deposition (PLD). Phase composition and microstructure of the LAO-BST thin films were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The LAO-BST thin films were solid solution of LAO nd BST, with lattice constant…
▽ More
LaAlO3-Ba0.5Sr0.5TiO3 (LAO-BST) thin films, with different LAO contents, were deposited on Pt/Ti/SiO2/Si and (100) LaAlO3 substrate, via a pulsed laser deposition (PLD). Phase composition and microstructure of the LAO-BST thin films were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The LAO-BST thin films were solid solution of LAO nd BST, with lattice constant decreasing with increasing LAO content. The composition of (LAO)x(BST)1-x, estimated from the lattice constant of the thin films derived from the targets of 1/6, 2/6 and 3/6 LAO, was 0.143, 0.278, 0.476, respectively. The grain size of the thin films decreased as a result of the incorporation of LAO into BST. Dielectric properties of the LAO-BST thin films on Pt/Ti/SiO2/Si were measured at low frequency (100 kHz), while those on LaAlO3 substrate were characterized at high frequency (~7.9 GHz). The dielectric constants of the film derived from pure BST target and those from the targets with 1/6, 2/6 and 3/6 area ratio of LAO, on Pt/Ti/SiO2/Si substrate, were 772, 514, 395 and 282, with a dielectric loss of 0.096, 0.023, 0.024 and 0.025, and a dielectric tunability of 65%, 53%, 43% and 14%, respectively. The dielectric constant of the LAO-BST films on LaAlO3 substrate were 2436, 2148, 2018, 1805, with a maximum dielectric tunability of 11%, 13%, 10% and 8% at a maximum applied voltage of 2.4 kV (~9.2 kV/cm).
△ Less
Submitted 8 May, 2003;
originally announced May 2003.
-
Anomalous microwave response of high-temperature superconducting thin-film microstrip resonator in weak dc magnetic fields
Authors:
X. S. Rao,
C. K. Ong,
B. B. **,
C. Y. Tan,
S. Y. Xu,
P. Chen,
J. Li,
Y. P. Feng
Abstract:
We have studied an anomalous microwave (mw) response of superconducting YBa_{2}Cu_{3}O_{7-delta} (YBCO) microstrip resonators in the presence of a weak dc magnetic field, H_{dc}. The surface resistance (R_{s}) and reactance (X_{s}) show a correlated non-monotonic behaviour as a function of H_{dc}. R_{s} and X_{s} were found to initially decrease with elevated H_{dc} and then increase after H_{dc…
▽ More
We have studied an anomalous microwave (mw) response of superconducting YBa_{2}Cu_{3}O_{7-delta} (YBCO) microstrip resonators in the presence of a weak dc magnetic field, H_{dc}. The surface resistance (R_{s}) and reactance (X_{s}) show a correlated non-monotonic behaviour as a function of H_{dc}. R_{s} and X_{s} were found to initially decrease with elevated H_{dc} and then increase after H_{dc} reaches a crossover field, H_{c}, which is independent of the amplitude and frequency of the input mw signal within the measurements. The frequency dependence of R_{s} is almost linear at fixed H_{dc} with different magnitudes (<H_{c}, =H_{c} and >H_{c}). The impedance plane analysis demonstrates that r_{H}, which is defined as the ratio of the change in R_{s}(H_{dc}) and that in X_{s}(H_{dc}), is about 0.6 at H_{dc}<H_{c} and 0.1 at H_{dc}>H_{c}. The H_{dc} dependence of the surface impedance is qualitatively independent of the orientation of H_{dc}.
△ Less
Submitted 29 August, 1999;
originally announced August 1999.
