-
Prediction of flow and elastic stresses in a viscoelastic turbulent channel flow using convolutional neural networks
Authors:
Arivazhagan G. Balasubramanian,
Ricardo Vinuesa,
Outi Tammisola
Abstract:
Neural-network models have been employed to predict the instantaneous flow close to the wall in a viscoelastic turbulent channel flow. The numerical simulation data at the wall is utilized to predict the instantaneous velocity fluctuations and polymeric-stress fluctuations at three different wall-normal positions. Apart from predicting the velocity fluctuations well in a hibernating flow, the neur…
▽ More
Neural-network models have been employed to predict the instantaneous flow close to the wall in a viscoelastic turbulent channel flow. The numerical simulation data at the wall is utilized to predict the instantaneous velocity fluctuations and polymeric-stress fluctuations at three different wall-normal positions. Apart from predicting the velocity fluctuations well in a hibernating flow, the neural-network models are also shown to predict the polymeric shear stress and the trace of the polymeric stresses at a given wall-normal location with reasonably good accuracy. These non-intrusive sensing models can be integrated in an experimental setting to construct the polymeric-stress field in turbulent flows, which otherwise may not be directly quantifiable in experimental measurements.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
The effect of contact angle hysteresis on a droplet in a viscoelastic two-phase system
Authors:
Kazem Bazesefidpar,
Outi Tammisola
Abstract:
We investigate the dynamic behaviour of a two-dimensional (2D) droplet adhering to a wall in Poiseuille flow at low Reynolds numbers, in a system where either the droplet is viscoelastic (V/N) or the surrounding medium (N/V). The results reveal that the deformation of the viscoelastic drop over time is changed due to the presence of polymeric molecules. In the first stage, the viscoelastic droplet…
▽ More
We investigate the dynamic behaviour of a two-dimensional (2D) droplet adhering to a wall in Poiseuille flow at low Reynolds numbers, in a system where either the droplet is viscoelastic (V/N) or the surrounding medium (N/V). The results reveal that the deformation of the viscoelastic drop over time is changed due to the presence of polymeric molecules. In the first stage, the viscoelastic droplet speeds up and deforms faster, while in the second stage, the Newtonian counterpart accelerates and its deformation outpaces the viscoelastic droplet. The deformation of viscoelastic drop is retarded significantly in the second stage with increasing Deborah number $De$. In the V/N case, the viscous bending is enhanced on the receding side for small $De$, but it is weakened by further increase in $De$, and this non-monotonic behavior brings about an increase in the receding contact line velocity at small $De$ and a decrease at large $De$. On the advancing side, the viscous bending is decreased monotonically for $Ca<0.25$, and hence the advancing contact line velocity is decreased with increasing $De$; however, the viscous bending presents a non-monotonic behavior for $Ca=0.25$ at the advancing side. The non-monotonic behavior on the receding side is attributed to the emergence of outward pulling stresses in the vicinity of the receding contact line and the inception of strain-hardening at higher $De$, while the reduction in the viscous bending at the advancing side is the result of just strain-hardening due to the presence of dominant extensional flow on the advancing side. Finally, in the N/V system, the viscoelasticity of the medium suppresses the droplet deformation on both receding and advancing sides, and this effect is more pronounced with increasing De; the weakening effect of viscous bending is enhanced significantly at the advancing side by increasing the Giesekus mobility parameter.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
General hydrodynamic features of elastoviscoplastic fluid flows through randomised porous media
Authors:
Saeed Parvar,
Emad Chaparian,
Outi Tammisola
Abstract:
A numerical study of yield-stress fluids flowing in porous media is presented. The porous media is randomly constructed by non-overlap** mono-dispersed circular obstacles. Two class of rheological models are investigated: elastoviscoplastic fluids (i.e. Saramito model) and viscoplastic fluids (i.e. Bingham model). A wide range of practical Weissenberg and Bingham numbers is studied at three diff…
▽ More
A numerical study of yield-stress fluids flowing in porous media is presented. The porous media is randomly constructed by non-overlap** mono-dispersed circular obstacles. Two class of rheological models are investigated: elastoviscoplastic fluids (i.e. Saramito model) and viscoplastic fluids (i.e. Bingham model). A wide range of practical Weissenberg and Bingham numbers is studied at three different levels of porosities of the media. The emphasis is on revealing some physical transport mechanisms of yield-stress fluids in porous media when the elastic behaviour of this kind of fluids is incorporated. Thus, computations of elastoviscoplastic fluids are performed and are compared with the viscoplastic fluid flow properties. At a constant Weissenberg number, the pressure drop increases both with the Bingham number and the solid volume fraction of obstacles. However, the effect of elasticity is less trivial. At low Bingham numbers, the pressure drop of an elastoviscoplastic fluid increases compared to a viscoplastic fluid, while at high Bingham numbers we observe drag reduction by elasticity. At the yield limit (i.e. infinitely large Bingham numbers), elasticity of the fluid systematically promotes yielding: elastic stresses help the fluid to overcome the yield stress resistance at smaller pressure gradients. We observe that elastic effects increase with both Weissenberg and Bingham numbers. In both cases, elastic effects finally make the elastoviscoplastic flow unsteady, which consequently can result in chaos and turbulence. Keywords: Yield-stress fluids; Viscoplastic fluids; Elastoviscoplastic fluids; Porous media
△ Less
Submitted 29 May, 2024; v1 submitted 14 August, 2023;
originally announced August 2023.
-
Elastoviscoplastic fluid flow past a circular cylinder
Authors:
S. Parvar,
K. T. Iqbal,
M. N. Ardekani,
L. Brandt,
O. Tammisola
Abstract:
The combined effect of fluid elasticity and yield-stress on the flow past a circular cylinder is studied by two-dimensional direct numerical simulation. We analyze the effects of yield-stress, elasticity, shear-thinning, and shear-thickening on the wake characteristics using the Saramito constitutive model. The elastoviscoplastic (EVP) wake flow is studied at a moderate Reynolds number (Re = 100)…
▽ More
The combined effect of fluid elasticity and yield-stress on the flow past a circular cylinder is studied by two-dimensional direct numerical simulation. We analyze the effects of yield-stress, elasticity, shear-thinning, and shear-thickening on the wake characteristics using the Saramito constitutive model. The elastoviscoplastic (EVP) wake flow is studied at a moderate Reynolds number (Re = 100) where two-dimensional vortex shedding occurs in the Newtonian case. We find that in the shear-thinning elastoviscoplastic flow, when yield stress increases, the drag coefficient and root mean square of the lift coefficient both decrease, while the length of the recirculation bubble $L_{RB}$ increases. These changes indicate that the wake oscillation amplitude decreases with an increasing yield stress. For shear-thickening however, the drag coefficient $C_D$ increases at a large Bingham number, and the wake becomes chaotic. The comparison of viscoelastic fluid and EVP fluid reveals that the polymer stresses, tr($τ^p$), decay considerably less downstream of the cylinder in the EVP case, indicating that significant stresses persist at large distances. We observe that shear-thinning competes with elastic and yield stresses and counteracts their effect, while shear-thickening enhances elastic and yield stress effects, so that the flow pattern can change from periodic to a chaotic flow.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Experimental Investigation on Particle-Laden Flows of Viscoelastic Fluids in Micro-Channels Using Optical Coherence Tomography
Authors:
Kasra Amini,
Gustaf Martensson,
Outi Tammisola,
Fredrik Lundell
Abstract:
Considering the nonlinear response of non-Newtonian fluids to the local shear exerted on the bulks of fluid, the initially quasi-uniform distribution of the particles might be subject to alteration as well, due to the unbalanced force distribution on the particles. The current research investigates such particle migrations for flows of Viscoelastic Fluids (VEFs) in a straight micro-channel with a…
▽ More
Considering the nonlinear response of non-Newtonian fluids to the local shear exerted on the bulks of fluid, the initially quasi-uniform distribution of the particles might be subject to alteration as well, due to the unbalanced force distribution on the particles. The current research investigates such particle migrations for flows of Viscoelastic Fluids (VEFs) in a straight micro-channel with a 1 by 3.25 mm rectangular cross-section. Polyacrylamide polymer in concentrations of 210 and 250 ppm have been used, where the heavy, linear, long-chain structure of the polymer introduces elasticity to the fluid. The flow measurements are performed using the state-of-the-art Optical Coherence Tomography (OCT) in 2D acquisition and doppler modes (D-OCT) to simultaneously resolve tomographic velocity field, and the transition of particles through the monitored cross-sections. Through the implementation of the experimental method in the current manuscript, the capability and convenience of using OCT for the problem at hand are demonstrated, as the abovementioned obtained data were to be equivalently captured by simultaneous use of Particle Image Velocimetry (PIV), for the ambient medium velocity field, and Lagrangian Particle Tracking (LPT) schemes, for identification and tracking the position of the particles. The velocity field is obtained with the spatial resolution of 2.58um in the depth direction, and through sub-pixel image processing, highly accurate positioning of the particles is realized. The experimental results are then used for statistical calculations, such as the Probability Distribution Function (PDF) of the cross-sectional map of the space frequented by the particles to explain the underlying physics.
△ Less
Submitted 25 February, 2023;
originally announced February 2023.
-
The role of wetting on the flow of two immiscible fluids in porous media
Authors:
Armin Shahmardi,
Salar Zamani Salimi,
Outi Tammisola,
Luca Brandt,
Marco Edoardo Rosti
Abstract:
We study the role of the capillary number, $Ca$ and of the surface wettability on the dynamics of the interface between an invading and a defending phase in a porous medium by means of numerical simulations. We employ a hybrid phase field-immersed boundary approach to successfully model the contact line dynamics over the solid objects. Using a phase-field method which naturally incorporates dynami…
▽ More
We study the role of the capillary number, $Ca$ and of the surface wettability on the dynamics of the interface between an invading and a defending phase in a porous medium by means of numerical simulations. We employ a hybrid phase field-immersed boundary approach to successfully model the contact line dynamics over the solid objects. Using a phase-field method which naturally incorporates dynamic wetting we eliminate the need for empirical contact line models to address contact line singularity. We map the two dominant modes governing the motion of the interface, namely, capillary fingering, and stable penetration, in the ($Ca$-$θ$) plane, with $θ$ the static contact angle prescribed at the solid pores. Capillary fingering dominates at lower values of $Ca$ and pores hydrophobic to the invading phase, while a stable penetration is observed on hydrophillic surfaces. We present new measurements and analyses, including curvature probability density functions (pdf) and average curvature. We also show that the pressure needed for the invading phase to advance at constant flow rate decreases with the capillary number, and increases with the contact angle at the capillary numbers considered. The latter is due to a significant increase of the length of the interface in the case of capillary fingering. Finally, we show that it is possible to identify the different interfacial modes by measuring the penetration length and velocity during the medium filling.
△ Less
Submitted 30 May, 2024; v1 submitted 22 October, 2022;
originally announced October 2022.
-
Rapid wetting of shear-thinning fluids
Authors:
Susumu Yada,
Kazem Bazesefidpar,
Outi Tammisola,
Gustav Amberg,
Shervin Bagheri
Abstract:
Using experiments and numerical simulations, we investigate the spontaneous spreading of droplets of aqueous glycerol (Newtonian) and aqueous polymer (shear-thinning) solutions on smooth surfaces. We find that in the first millisecond the spreading of the shear-thinning solutions is identical to the spreading of water, regardless of the polymer concentration. In contrast, aqueous glycerol solution…
▽ More
Using experiments and numerical simulations, we investigate the spontaneous spreading of droplets of aqueous glycerol (Newtonian) and aqueous polymer (shear-thinning) solutions on smooth surfaces. We find that in the first millisecond the spreading of the shear-thinning solutions is identical to the spreading of water, regardless of the polymer concentration. In contrast, aqueous glycerol solutions show a different behavior, namely, significantly slower spreading rate than water. In the initial rapid spreading phase, the dominating forces that can resist the wetting are inertial forces and contact-line friction. For the glycerol solutions, an increase in glycerol concentration effectively increases the contact-line friction, resulting in increased resistance to wetting. For the polymeric solutions, however, an increase in polymer concentration does not modify contact-line friction. As a consequence, the energy dissipation at the contact line can not be controlled by varying the amount of additives for shear-thinning fluids. The reduction of the spreading rate of shear-thinning fluids on smooth surfaces in the rapid wetting regime can only be achieved by increasing solvent viscosity. Our results have implications for phase-change applications where the control of the rapid spreading rate is central, such as anti-icing and soldering
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Experimental and numerical investigation of bubble migration in shear flow: deformability-driven chaining and repulsion
Authors:
Blandine Feneuil,
Kazi Tassawar Iqbal,
Atle Jensen,
Luca Brandt,
Outi Tammisola,
Andreas Carlson
Abstract:
We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we…
▽ More
We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we notice that, for all fluids, the interaction type depends on the relative position of the bubbles. If they are aligned in the vorticity direction, they repel, if not, they attract each other. The simulations show a similar behavior in Newtonian fluids as in viscoelastic and elastoviscoplastic fluids, as long as the capillary number is sufficiently large. This shows that the interaction-related migration of the bubbles is strongly affected by the bubble deformation. We suggest that the cause of migration is the interaction between the heterogeneous pressure fields around the deformed bubbles, due to capillary pressure.
△ Less
Submitted 21 April, 2023; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Numerical simulation of the coalescence-induced polymeric droplet jum** on superhydrophobic surfaces
Authors:
Kazem Bazesefidpar,
Luca Brandt,
Outi Tammisola
Abstract:
Self-propelled jum** of two polymeric droplets on superhydrophobic surfaces is investigated by three-dimensional direct numerical simulations. Two identical droplets of a viscoelastic fluid slide, meet and coalesce on a surface with contact angle 180 degrees. The droplets are modelled by the Giesekus constitutive equation, introducing both viscoelasticity and a shear-thinning effects. The Cahn-H…
▽ More
Self-propelled jum** of two polymeric droplets on superhydrophobic surfaces is investigated by three-dimensional direct numerical simulations. Two identical droplets of a viscoelastic fluid slide, meet and coalesce on a surface with contact angle 180 degrees. The droplets are modelled by the Giesekus constitutive equation, introducing both viscoelasticity and a shear-thinning effects. The Cahn-Hilliard Phase-Field method is used to capture the droplet interface. The simulations capture the spontaneous coalescence and jum** of the droplets. The effect of elasticity and shear-thinning on the coalescence and jum** is investigated at capillary-inertial and viscous regimes. The results reveal that the elasticity of the droplet changes the known capillary-inertial velocity scaling of the Newtonian drops at large Ohnesorge numbers; the resulting viscoelastic droplet jumps from the surface at larger Ohnesorge numbers than a Newtonian drop, when elasticity gives rise to visible shape oscillations of the merged droplet. The numerical results show that polymer chains are stretched during the coalescence and prior to the departure of two drops, and the resulting elastic stresses at the interface induce the jum** of the liquid out of the surface. This study shows that viscoelasticity, typical of many biological and industrial applications, affects the droplet behaviour on superhydrophobic and self-cleaning surfaces.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
A dual resolution phase-field solver for wetting of viscoelastic droplets
Authors:
Kazem Bazesefidpar,
Luca Brandt,
Outi Tammisola
Abstract:
We present a new and efficient phase-field solver for viscoelastic fluids with moving contact line based on a dual-resolution strategy. The interface between two immiscible fluids is tracked by using the Cahn-Hilliard phase-field model, and the viscoelasticity incorporated into the phase-field framework. The main challenge of this approach is to have enough resolution at the interface to approach…
▽ More
We present a new and efficient phase-field solver for viscoelastic fluids with moving contact line based on a dual-resolution strategy. The interface between two immiscible fluids is tracked by using the Cahn-Hilliard phase-field model, and the viscoelasticity incorporated into the phase-field framework. The main challenge of this approach is to have enough resolution at the interface to approach the sharp-interface methods. The method presented here addresses this problem by solving the phase field variable on a mesh twice as fine as that used for the velocities, pressure, and polymer-stress constitutive equations. The method is based on second-order finite differences for the discretization of the fully coupled Navier-Stokes, polymeric constitutive and Cahn-Hilliard equations, and it is implemented in a 2D pencil-like domain decomposition to benefit from existing highly-scalable parallel algorithms. A FFT-based solver is used for the Helmholtz and Poisson equations with different global sizes. The splitting method proposed by previous authors is used to impose the dynamic contact angle boundary conditions in the case of large density and viscosity ratios. The implementation is validated against experimental data and previous numerical studies in 2D and 3D. The results indicate that the dual-resolution approach produces nearly identical results while saving computational time for both Newtonian and viscoelastic flows in 3D.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Dynamics of an elastoviscoplastic droplet in a Newtonian medium under shear flow
Authors:
Daulet Izbassarov,
Outi Tammisola
Abstract:
The dynamics of a single elastoviscoplastic (EVP) drop immersed in plane shear flow of a Newtonian fluid is studied by 3D direct numerical simulations using a finite-difference and level-set method combined with the Saramito model for the EVP fluid. This model gives rise to a yield stress behavior, where the unyielded state of the material is described as a Kelvin-Voigt viscoelastic solid and the…
▽ More
The dynamics of a single elastoviscoplastic (EVP) drop immersed in plane shear flow of a Newtonian fluid is studied by 3D direct numerical simulations using a finite-difference and level-set method combined with the Saramito model for the EVP fluid. This model gives rise to a yield stress behavior, where the unyielded state of the material is described as a Kelvin-Voigt viscoelastic solid and the yielded state as a viscoelastic Oldroyd-B fluid. Yielding of an initially solid drop of Carbopol is simulated under successively increasing shear rates. We proceed to examine the roles of nondimensional parameters on the yielding process; in particular, the Bingham number ($Bi$), capillary number ($Ca$), Weissenberg number ($Wi$), and ratio of solvent and total drop viscosity. We find that all of these parameters, and not only $Bi$, have a significant influence on the drop dynamics. Numerical simulations predict that the volume of the unyielded region inside the droplet increases with $Bi$ and $Wi$, while it decreases with $Ca$ at low $Wi$ and $Bi$. A new regime map is obtained for the prediction of the yielded, unyielded, and partly yielded modes as a function of $Bi$ and $Wi$. The drop deformation is studied and explained by examining the stresses in the vicinity of the drop interface. The deformation has a complex dependence on $Bi$ and $Wi$. At low $Bi$, the droplet deformation shows a nonmonotonic behavior with an increasing $Wi$. In contrast, at moderate and high $Bi$, droplet deformation always increases with $Wi$. Moreover, it is found that the deformation increases with $Ca$ and with the solvent to total drop viscosity ratio. A simple ordinary differential equation model is developed to explain the various behaviours observed numerically. The presented results are in contrast with the heuristic idea that viscoelasticity in the dispersed phase always inhibits deformation.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Turbulent bubbly channel flows: Effects of soluble surfactant and viscoelasticity
Authors:
Zaheer Ahmed,
Daulet Izbassarov,
Pedro Costa,
Metin Muradoglu,
Outi Tammisola
Abstract:
Interface-resolved direct numerical simulations are performed to examine the combined effects of soluble surfactant and viscoelasticity on the structure of a bubbly turbulent channel flow. The incompressible flow equations are solved fully coupled with the FENE-P viscoelastic model and the equations governing interfacial and bulk surfactant concentrations. The latter coupling is achieved through a…
▽ More
Interface-resolved direct numerical simulations are performed to examine the combined effects of soluble surfactant and viscoelasticity on the structure of a bubbly turbulent channel flow. The incompressible flow equations are solved fully coupled with the FENE-P viscoelastic model and the equations governing interfacial and bulk surfactant concentrations. The latter coupling is achieved through a non-linear equation of state which relates the surface tension to the surfactant concentration at the interface. The two-fluid Navier-Stokes equations are solved using a front-tracking method, augmented with a very efficient FFT-based pressure projection method that allows for massively parallel simulations of turbulent flows. It is found that, for the surfactant-free case, bubbles move toward the wall due to inertial lift force, resulting in formation of wall layers and a significant decrease in the flow rate. Conversely, a high-enough concentration of surfactant changes the direction of lateral migration of bubbles, i.e., the contaminated bubbles move toward the core region and spread out across the channel. When viscoelasticity is considered, viscoelastic stresses counteract the Marangoni stresses, promoting formation of bubbly wall-layers and consequently strong decrease in the flow rate. The formation of bubble wall-layers for combined case depends on the interplay of the inertial and elastic, and Marangoni forces.
△ Less
Submitted 12 October, 2021; v1 submitted 11 October, 2021;
originally announced October 2021.
-
Polymer drag reduction in surfactant-contaminated turbulent bubbly channel flows
Authors:
Daulet Izbassarov,
Zaheer Ahmed,
Pedro Costa,
Ville Vuorinen,
Outi Tammisola,
Metin Muradoglu
Abstract:
Polymer additives are commonly utilized to manipulate bubbly flows in various applications. Here, we investigate the effects of clean and contaminated bubbles driven upwards (upflow) in Newtonian and viscoelastic turbulent channel flows. Interface-resolved direct numerical simulations are performed to examine sole and combined effects of soluble surfactant and viscoelasticity using an efficient 3D…
▽ More
Polymer additives are commonly utilized to manipulate bubbly flows in various applications. Here, we investigate the effects of clean and contaminated bubbles driven upwards (upflow) in Newtonian and viscoelastic turbulent channel flows. Interface-resolved direct numerical simulations are performed to examine sole and combined effects of soluble surfactant and viscoelasticity using an efficient 3D finite-difference/front-tracking method. The incompressible flow equations are solved fully coupled with the FENE-P viscoelastic model and the equations governing interfacial and bulk surfactant concentrations. The latter coupling is accomplished by a non-linear equation of state that relates the surface tension to the surfactant concentration. For Newtonian turbulent bubbly flows, the effects of Triton X-100 and 1-Pentanol surfactant are examined. It is observed that the sorption kinetics highly affect the dynamics of bubbly flow. A minute amount of Triton X-100 is found to be sufficient to prevent the formation of bubble clusters restoring the single-phase behavior while even two orders of magnitude more 1-Pentanol surfactant is not adequate to prevent the formation of layers. For viscoelastic turbulent flows, it is found that the viscoelasticity promotes formation of the bubble-wall layers and thus the polymer drag reduction is completely lost for the surfactant-free bubbly flows, while the addition of small amount of surfactant (Triton X-100) in this system restores the polymer drag reduction resulting in $25\%$ drag reduction for the $Wi=4$ case.
△ Less
Submitted 14 October, 2021; v1 submitted 11 October, 2021;
originally announced October 2021.
-
The effect of droplet coalescence on drag in turbulent channel flows
Authors:
Ianto Cannon,
Daulet Izbassarov,
Outi Tammisola,
Luca Brandt,
Marco E. Rosti
Abstract:
We study the effect of droplet coalescence on turbulent wall-bounded flows, by means of direct numerical simulations. In particular, the volume-of-fluid and front-tracking methods are used to simulate turbulent channel flows containing coalescing and non-coalescing droplets, respectively. We find that coalescing droplets have a negligible effect on the drag, whereas the non-coalescing ones steadil…
▽ More
We study the effect of droplet coalescence on turbulent wall-bounded flows, by means of direct numerical simulations. In particular, the volume-of-fluid and front-tracking methods are used to simulate turbulent channel flows containing coalescing and non-coalescing droplets, respectively. We find that coalescing droplets have a negligible effect on the drag, whereas the non-coalescing ones steadily increase drag as the volume fraction of the dispersed phase increases: indeed, at 10\% volume fraction, the non-coalescing droplets show a 30\% increase in drag, whereas the coalescing droplets show less than 4\% increase. We explain this by looking at the wall-normal location of droplets in the channel and show that non-coalescing droplets enter the viscous sublayer, generating an interfacial shear stress which reduces the budget for viscous stress in the channel. On the other hand, coalescing droplets migrate towards the bulk of the channel forming large aggregates, which hardly affect the viscous shear stress while dam** the Reynolds shear stress. We prove this by relating the mean viscous shear stress integrated in the wall-normal direction to the centreline velocity.
△ Less
Submitted 19 July, 2021; v1 submitted 3 June, 2021;
originally announced June 2021.
-
A fully Eulerian hybrid Immersed Boundary-Phase Field Model for contact line dynamics on complex geometries
Authors:
Armin Shahmardi,
Marco Edoardo Rosti,
Outi Tammisola,
Luca Brandt
Abstract:
We present a fully Eulerian hybrid immersed-boundary/phase-field model to simulate wetting and contact line motion over any arbitrary geometry. The solid wall is described with a volume-penalisation ghost-cell immersed boundary whereas the interface between the two fluids by a diffuse-interface method. The contact line motion on the complex wall is prescribed via slip velocity in the momentum equa…
▽ More
We present a fully Eulerian hybrid immersed-boundary/phase-field model to simulate wetting and contact line motion over any arbitrary geometry. The solid wall is described with a volume-penalisation ghost-cell immersed boundary whereas the interface between the two fluids by a diffuse-interface method. The contact line motion on the complex wall is prescribed via slip velocity in the momentum equation and static/dynamic contact angle condition for the order parameter of the Cahn-Hilliard model. This combination requires accurate computations of the normal and tangential gradients of the scalar order parameter and of the components of the velocity. However, the present algorithm requires the computation of averaging weights and other geometrical variables as a preprocessing step. Several validation tests are reported in the manuscript, together with 2D simulations of a droplet spreading over a sinusoidal wall with different contact angles and slip length and a spherical droplet spreading over a sphere, showing that the proposed algorithm is capable to deal with the three-phase contact line motion over any complex wall. The Eulerian feature of the algorithm facilitates the implementation and provides a straight-forward and potentially highly scalable parallelisation. The employed parallelisation of the underlying Navier-Stokes solver can be efficiently used for the multiphase part as well. The procedure proposed here can be directly employed to impose any types of boundary conditions (Neumann, Dirichlet and mixed) for any field variable evolving over a complex geometry, modelled with an immersed-boundary approach (for instance, modelling deformable biological membranes, red blood cells, solidification, evaporation and boiling, to name a few)
△ Less
Submitted 25 May, 2021; v1 submitted 1 April, 2021;
originally announced April 2021.
-
The first open channel for a yield-stress fluid in complex porous media
Authors:
Dimitrios Fraggedakis,
Emad Chaparian,
Outi Tammisola
Abstract:
The prediction of the first fluidized path of a yield-stress fluid in complex porous media is a challenging yet an important task to understand the fundamentals of fluid flow in several industrial and biological processes. In most cases, the conditions that open this first path are known either through experiments or expensive computations. Here, we present a simple network model to predict the fi…
▽ More
The prediction of the first fluidized path of a yield-stress fluid in complex porous media is a challenging yet an important task to understand the fundamentals of fluid flow in several industrial and biological processes. In most cases, the conditions that open this first path are known either through experiments or expensive computations. Here, we present a simple network model to predict the first open channel for a yield-stress fluid in a complex porous medium. For porous media made of non-overlap** disks, we find that the pressure drop required to open the first channel for given yield stress depends on both the relative disks size to the macroscopic length of the system and the packing fraction. We also report the statistics on the arc-length of the first open path. Finally, we discuss the implication of our results on the design of porous media used in energy storage applications.
△ Less
Submitted 16 August, 2020;
originally announced August 2020.
-
Effects of surface nanostructure and wettability on pool boiling: A molecular dynamics study
Authors:
Armin Shahmardi,
Outi Tammisola,
Mauro Chinappi,
Luca Brandt
Abstract:
We study the role of surface topology, surface chemistry, and wall superheat temperature on the onset of boiling, bubble nucleation and growth, and the possible formation of an insulating vapour film by means of large-scale MD simulations. In the numerical experiments, we control the system pressure by imposing a constant force on a moving piston. The simulations reveal that the presence of a nano…
▽ More
We study the role of surface topology, surface chemistry, and wall superheat temperature on the onset of boiling, bubble nucleation and growth, and the possible formation of an insulating vapour film by means of large-scale MD simulations. In the numerical experiments, we control the system pressure by imposing a constant force on a moving piston. The simulations reveal that the presence of a nanostructure triggers the bubble formation, determines the nucleation site and facilitates the energy transfer from the hot substrate to the water. The surface chemistry, on the other hand, governs the shape of the formed bubble. A hydrophilic surface chemistry accelerates the bubble nucleation, however, decelerates the bubble expansion, thus postponing the formation of the film of vapour. Therefore, a hydrophilic surface provides better energy transfer from the hot wall to the water. By analysing the system energy, we show that irrespective of wall topology and chemistry, there is a wall temperature for which the amount of transferred energy is maximum.
△ Less
Submitted 23 June, 2020;
originally announced July 2020.
-
Complex sliding flows of yield-stress fluids
Authors:
Emad Chaparian,
Outi Tammisola
Abstract:
A theoretical and numerical study of complex sliding flows of yield-stress fluids is presented. Yield-stress fluids are known to slide over solid surfaces if the tangential stress exceeds the {\it sliding yield stress}. The sliding may occur due to various microscopic phenomena such as the formation of a infinitesimal lubrication layer of the solvent and/or elastic deformation of the suspended sof…
▽ More
A theoretical and numerical study of complex sliding flows of yield-stress fluids is presented. Yield-stress fluids are known to slide over solid surfaces if the tangential stress exceeds the {\it sliding yield stress}. The sliding may occur due to various microscopic phenomena such as the formation of a infinitesimal lubrication layer of the solvent and/or elastic deformation of the suspended soft particles in the vicinity of the solid surfaces. This leads to a `stick-slip' law which complicates the modelling and analysis of the hydrodynamic characteristics of the yield-stress fluid flow. In the present study, we formulate the problem of sliding flow beyond one-dimensional rheometric flows. Then, a numerical scheme based on the augmented Lagrangian method is presented to attack these kind of problems. Theoretical tools are developed for analysing the flow/no-flow limit. The whole framework is benchmarked in planar Poiseuille flow and validated against analytical solutions. Then two more complex physical problems are investigated: slippery particle sedimentation and pressure-driven sliding flow in porous media. The {\it yield limit} is addressed in detail for both flow cases. In the particle sedimentation problem, method of characteristics---slipline method---in the presence of slip is revisited from the perfectly-plastic mechanics and used as a helpful tool in addressing the yield limit. Finally, flows through model and randomized porous media are studied. The randomized configuration is chosen to capture more sophisticated aspects of the yield-stress fluid flows in porous media at the yield limit---channelization.
△ Less
Submitted 28 October, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Turbulent channel flow of an elastoviscoplastic fluid
Authors:
Marco Edoardo Rosti,
Daulet Izbassarov,
Outi Tammisola,
Sarah Hormozi,
Luca Brandt
Abstract:
We present numerical simulations of laminar and turbulent channel flow of an elastoviscoplastic fluid. The non-Newtonian flow is simulated by solving the full incompressible Navier-Stokes equations coupled with the evolution equation for the elastoviscoplastic stress tensor. The laminar simulations are carried out for a wide range of Reynolds numbers, Bingham numbers and ratios of the fluid and to…
▽ More
We present numerical simulations of laminar and turbulent channel flow of an elastoviscoplastic fluid. The non-Newtonian flow is simulated by solving the full incompressible Navier-Stokes equations coupled with the evolution equation for the elastoviscoplastic stress tensor. The laminar simulations are carried out for a wide range of Reynolds numbers, Bingham numbers and ratios of the fluid and total viscosity, while the turbulent flow simulations are performed at a fixed bulk Reynolds number equal to 2800 and weak elasticity. We show that in the laminar flow regime the friction factor increases monotonically with the Bingham number (yield stress) and decreases with the viscosity ratio, while in the turbulent regime the the friction factor is almost independent of the viscosity ratio and decreases with the Bingham number, until the flow eventually returns to a fully laminar condition for large enough yield stresses. Three main regimes are found in the turbulent case, depending on the Bingham number: for low values, the friction Reynolds number and the turbulent flow statistics only slightly differ from those of a Newtonian fluid; for intermediate values of the Bingham number, the fluctuations increase and the inertial equilibrium range is lost. Finally, for higher values the flow completely laminarises. These different behaviors are associated with a progressive increases of the volume where the fluid is not yielded, growing from the centerline towards the walls as the Bingham number increases. The unyielded region interacts with the near-wall structures, forming preferentially above the high speed streaks. In particular, the near-wall streaks and the associated quasi-streamwise vortices are strongly enhanced in an highly elastoviscoplastic fluid and the flow becomes more correlated in the streamwise direction.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Computational modeling of multiphase viscoelastic and elastoviscoplastic flows
Authors:
Daulet Izbassarov,
Marco E. Rosti,
M. Niazi Ardekani,
Mohammad Sarabian,
Sarah Hormozi,
Luca Brandt,
Outi Tammisola
Abstract:
In this paper, a three-dimensional numerical solver is developed for suspensions of rigid and soft particles and droplets in viscoelastic and elastoviscoplastic (EVP) fluids. The presented algorithm is designed to allow for the first time three-dimensional simulations of inertial and turbulent EVP fluids with a large number particles and droplets. This is achieved by combining fast and highly scal…
▽ More
In this paper, a three-dimensional numerical solver is developed for suspensions of rigid and soft particles and droplets in viscoelastic and elastoviscoplastic (EVP) fluids. The presented algorithm is designed to allow for the first time three-dimensional simulations of inertial and turbulent EVP fluids with a large number particles and droplets. This is achieved by combining fast and highly scalable methods such as an FFT-based pressure solver, with the evolution equation for non-Newtonian (including elastoviscoplastic) stresses. In this flexible computational framework, the fluid can be modelled by either Oldroyd-B, neo-Hookean, FENE-P, and Saramito EVP models, and the additional equations for the non-Newtonian stresses are fully coupled with the flow. The rigid particles are discretized on a moving Lagrangian grid while the flow equations are solved on a fixed Eulerian grid. The solid particles are represented by an Immersed Boundary method (IBM) with a computationally efficient direct forcing method allowing simulations of a large numbers of particles. The immersed boundary force is computed at the particle surface and then included in the momentum equations as a body force. The droplets and soft particles on the other hand are simulated in a fully Eulerian framework, the former with a level-set method to capture the moving interface and the latter with an indicator function. The solver is first validated for various benchmark single-phase and two-phase elastoviscoplastic flow problems through comparison with data from the literature. Finally, we present new results on the dynamics of a buoyancy-driven drop in an elastoviscoplastic fluid.
△ Less
Submitted 22 August, 2018; v1 submitted 26 March, 2018;
originally announced March 2018.
-
Elastoviscoplastic flow in porous media
Authors:
F. De Vita,
M. E. Rosti,
D. Izbassarov,
L. Duffo,
O. Tammisola,
S. Hormozi,
L. Brandt
Abstract:
We investigate the elastoviscoplastic flow through porous media by numerical simulations. We solve the Navier-Stokes equations combined with the elastoviscoplastic model proposed by Saramito for the stress tensor evolution. In this model, the material behaves as a viscoelastic solid when unyielded, and as a viscoelastic Oldroyd-B fluid for stresses higher than the yield stress. The porous media is…
▽ More
We investigate the elastoviscoplastic flow through porous media by numerical simulations. We solve the Navier-Stokes equations combined with the elastoviscoplastic model proposed by Saramito for the stress tensor evolution. In this model, the material behaves as a viscoelastic solid when unyielded, and as a viscoelastic Oldroyd-B fluid for stresses higher than the yield stress. The porous media is made of a symmetric array of cylinders, and we solve the flow in one periodic cell. We find that the solution is time-dependent even at low Reynolds numbers as we observe oscillations in time of the unyielded region especially at high Bingham numbers. The volume of the unyielded region slightly decreases with the Reynolds number and strongly increases with the Bingham number; up to 70% of the total volume is unyielded for the highest Bingham numbers considered here. The flow is mainly shear dominated in the yielded region, while shear and elongational flow are equally distributed in the unyielded region. We compute the relation between the pressure drop and the flow rate in the porous medium and present an empirical closure as function of the Bingham and Reynolds numbers. The apparent permeability, normalized with the case of Newtonian fluids, is shown to be greater than 1 at low Bingham numbers, corresponding to lower pressure drops due to the flow elasticity, and smaller than 1 for high Bingham numbers, indicating larger dissipation in the flow owing to the presence of the yielded regions. Finally we investigate the effect of the Weissenberg number on the distribution of the unyielded regions and on the pressure gradient.
△ Less
Submitted 12 April, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
An efficient mass-preserving interface-correction level set/ghost fluid method for droplet suspensions under depletion forces
Authors:
Zhouyang Ge,
Jean-Christophe Loiseau,
Outi Tammisola,
Luca Brandt
Abstract:
Aiming for the simulation of colloidal droplets in microfluidic devices, we present here a numerical method for two-fluid systems subject to surface tension and depletion forces among the suspended droplets. The algorithm is based on an efficient solver for the incompressible two-phase Navier-Stokes equations, and uses a mass-conserving level set method to capture the fluid interface. The four nov…
▽ More
Aiming for the simulation of colloidal droplets in microfluidic devices, we present here a numerical method for two-fluid systems subject to surface tension and depletion forces among the suspended droplets. The algorithm is based on an efficient solver for the incompressible two-phase Navier-Stokes equations, and uses a mass-conserving level set method to capture the fluid interface. The four novel ingredients proposed here are, firstly, an interface-correction level set (ICLS) method; global mass conservation is achieved by performing an additional advection near the interface, with a correction velocity obtained by locally solving an algebraic equation, which is easy to implement in both 2D and 3D. Secondly, we report a second-order accurate geometric estimation of the curvature at the interface and, thirdly, the combination of the ghost fluid method with the fast pressure-correction approach enabling an accurate and fast computation even for large density contrasts. Finally, we derive a hydrodynamic model for the interaction forces induced by depletion of surfactant micelles and combine it with a multiple level set approach to study short-range interactions among droplets in the presence of attracting forces.
△ Less
Submitted 24 October, 2017; v1 submitted 25 January, 2017;
originally announced January 2017.
-
Effect of viscosity ratio on the self-sustained instabilities in planar immiscible jets
Authors:
Outi Tammisola,
Jean-Christophe Loiseau,
Luca Brandt
Abstract:
Previous studies have shown that intermediate surface tension has a counterintuitive destabilizing effect on 2-phase planar jets. Here, the transition process in confined 2D jets of two fluids with varying viscosity ratio is investigated using DNS. Neutral curves for persistent oscillations are found by recording the norm of the velocity residuals in DNS for over 1000 nondimensional time units, or…
▽ More
Previous studies have shown that intermediate surface tension has a counterintuitive destabilizing effect on 2-phase planar jets. Here, the transition process in confined 2D jets of two fluids with varying viscosity ratio is investigated using DNS. Neutral curves for persistent oscillations are found by recording the norm of the velocity residuals in DNS for over 1000 nondimensional time units, or until the signal has reached a constant level in a logarithmic scale - either a converged steady state, or a "statistically steady" oscillatory state. Oscillatory final states are found for all viscosity ratios (0.1-10). For uniform viscosity (m=1), the first bifurcation is through a surface tension-driven global instability. For low viscosity of the outer fluid, there is a mode competition between a steady asymmetric Coanda-type attachment mode and the surface tension-induced mode. At moderate surface tension, the Coanda-type attachment dominates and eventually triggers time-dependent convective bursts. At high surface tension, the surface tension-dominated mode dominates. For high viscosity of the outer fluid, persistent oscillations appear due to a strong convective instability. Finally, the m=1 jet remains unstable far from the inlet when the shear profile is nearly constant. Comparing this to a parallel Couette flow (without inflection points), we show that in both flows, a hidden interfacial mode brought out by surface tension becomes temporally and absolutely unstable in an intermediate Weber and Reynolds regime. An energy analysis of the Couette setup shows that surface tension, although dissipative, induces a velocity field near the interface which extracts energy from the flow through a viscous mechanism. This study highlights the rich dynamics of immiscible planar uniform-density jets, where several self-sustained and convective mechanisms compete depending on the exact parameters.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
Optimal wavy surface to suppress vortex shedding using second-order sensitivity to shape changes
Authors:
Outi Tammisola
Abstract:
A method to find optimal 2nd-order perturbations is presented, and applied to find the optimal spanwise-wavy surface for suppression of cylinder wake instability. Second-order perturbations are required to capture the stabilizing effect of spanwise waviness, which is ignored by standard adjoint-based sensitivity analyses. Here, previous methods are extended so that (i) 2nd-order sensitivity is for…
▽ More
A method to find optimal 2nd-order perturbations is presented, and applied to find the optimal spanwise-wavy surface for suppression of cylinder wake instability. Second-order perturbations are required to capture the stabilizing effect of spanwise waviness, which is ignored by standard adjoint-based sensitivity analyses. Here, previous methods are extended so that (i) 2nd-order sensitivity is formulated for base flow changes satisfying linearised Navier-Stokes, and (ii) the resulting method is applicable to a 2D global instability problem. This makes it possible to formulate 2nd-order sensitivity to shape modifications. Using this formulation, we find the optimal shape to suppress the a cylinder wake instability. The optimal shape is then perturbed by random distributions in full 3D stability analysis to confirm that it is a local optimal at the given amplitude and wavelength. Furthermore, it is shown that none of the 10 random wavy shapes alone stabilize the wake flow at Re=50, while the optimal shape does. At Re=100, surface waviness of maximum height 1% of the cylinder diameter is sufficient to stabilize the flow. The optimal surface creates streaks by passively extracting energy from the base flow derivatives and effectively altering the tangential velocity component at the wall, as opposed to spanwise-wavy suction which inputs energy to the normal velocity component at the wall. This paper presents a fully two-dimensional and computationally affordable method to find optimal 2nd-order perturbations of generic flow instability problems and any boundary control (such as boundary forcing, shape modulation or suction).
△ Less
Submitted 10 February, 2016;
originally announced February 2016.
