-
The homogeneous internal structure of CM-like asteroid (41) Daphne
Authors:
B. Carry,
F. Vachier,
J. Berthier,
M. Marsset,
P. Vernazza,
J. Grice,
W. J. Merline,
E. Lagadec,
A. Fienga,
A. Conrad,
E. Podlewska-Gaca,
T. Santana-Ros,
M. Viikinkoski,
J. Hanuš,
C. Dumas,
J. D. Drummond,
P. M. Tamblyn,
C. R. Chapman,
R. Behrend,
L. Bernasconi,
P. Bartczak,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani
, et al. (26 additional authors not shown)
Abstract:
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Tr…
▽ More
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Physical, spectral, and dynamical properties of asteroid (107) Camilla and its satellites
Authors:
M. Pajuelo,
B. Carry,
F. Vachier,
M. Marsset,
J. Berthier,
P. Descamps,
W. J. Merline,
P. M. Tamblyn,
J. Grice,
A. Conrad,
A. Storrs,
B. Timerson,
D. Dunham,
S. Preston,
A. Vigan,
B. Yang,
P. Vernazza,
S. Fauvaud,
L. Bernasconi,
D. Romeuf,
R. Behrend,
C. Dumas,
J. D. Drummond,
J. -L. Margot,
P. Kervella
, et al. (2 additional authors not shown)
Abstract:
The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution…
▽ More
The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution images and spectro-images. Using 80 positions over 15 years, we determine the orbit of its larger satellite to be circular, equatorial, and prograde, with RMS residuals of 7.8 mas. From 11 positions in three epochs only, in 2015 and 2016, we determine a preliminary orbit for the second satellite. We find the orbit to be somewhat eccentric and slightly inclined to the primary's equatorial plane, reminiscent of the inner satellites of other asteroid triple systems. Comparison of the near-infrared spectrum of the larger satellite reveals no significant difference with Camilla. Hence, these properties argue for a formation of the satellites by excavation from impact and re-accumulation of ejecta. We determine the spin and 3-D shape of Camilla. The model fits well each data set. We determine Camilla to be larger than reported from modeling of mid-infrared photometry, with a spherical-volume-equivalent diameter of 254 $\pm$ 36 km (3 $σ$ uncertainty), in agreement with recent results from shape modeling (Hanus2017+). Combining the mass of (1.12 $\pm$ 0.01) $\times$ 10$^{19}$ kg determined from the dynamics of the satellites and the volume from the 3-D shape model, we determine a density of 1,280 $\pm$ 130 SI. From this density, and considering Camilla's spectral similarities with (24) Themis and (65) Cybele (for which water ice coating on surface grains was reported), we infer a silicate-to-ice mass ratio of 1-6, with a 10-30% macroporosity.
△ Less
Submitted 7 March, 2018;
originally announced March 2018.
-
The Resolved Asteroid Program - Size, shape, and pole of (52) Europa
Authors:
W. J. Merline,
J. D. Drummond,
B. Carry,
A. Conrad,
P. M. Tamblyn,
C. Dumas,
M. Kaasalainen,
A. Erikson,
S. Mottola,
J. Durech,
G. Rousseau,
R. Behrend,
G. B. Casalnuovo,
B. Chinaglia,
J. C. Christou,
C. R. Chapman,
C. Neyman
Abstract:
With the adaptive optics (AO) system on the 10 m Keck-II telescope, we acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa on 2005 January 20. The epochs covered its rotation period and, by following its changing shape and orientation on the plane of sky, we obtained its triaxial ellipsoid dimensions and spin pole location. An independent determination from images at thre…
▽ More
With the adaptive optics (AO) system on the 10 m Keck-II telescope, we acquired a high quality set of 84 images at 14 epochs of asteroid (52) Europa on 2005 January 20. The epochs covered its rotation period and, by following its changing shape and orientation on the plane of sky, we obtained its triaxial ellipsoid dimensions and spin pole location. An independent determination from images at three epochs obtained in 2007 is in good agreement with these results. By combining these two data sets, along with a single epoch data set obtained in 2003, we have derived a global fit for (52) Europa of diameters (379x330x249) +/- (16x8x10) km, yielding a volume-equivalent spherical-diameter of 315 +/- 7 km, and a rotational pole within 7 deg of [RA; Dec] = [257,+12] in an Equatorial J2000 reference frame (ECJ2000: 255,+35). Using the average of all mass determinations available forEuropa, we derive a density of 1.5 +/- 0.4, typical of C-type asteroids. Comparing our images with the shape model of Michalowski et al. (A&A 416, 2004), derived from optical lightcurves, illustrates excellent agreement, although several edge features visible in the images are not rendered by the model. We therefore derived a complete 3-D description of Europa's shape using the KOALA algorithm by combining our imaging epochs with 4 stellar occultations and 49 lightcurves. We use this 3-D shape model to assess these departures from ellipsoidal shape. Flat facets (possible giant craters) appear to be less distinct on (52) Europa than on other C-types that have been imaged in detail. We show that fewer giant craters, or smaller craters, is consistent with its expected impact history. Overall, asteroid (52) Europa is still well modeled as a smooth triaxial ellipsoid with dimensions constrained by observations obtained over several apparitions.
△ Less
Submitted 22 January, 2013;
originally announced January 2013.
-
Physical properties of ESA Rosetta target asteroid (21) Lutetia: Shape and flyby geometry
Authors:
B. Carry,
M. Kaasalainen,
C. Leyrat,
W. J. Merline,
J. D. Drummond,
A. Conrad,
H. A. Weaver,
P. M. Tamblyn,
C. R. Chapman,
C. Dumas,
F. Colas,
J. C. Christou,
E. Dotto,
D. Perna,
S. Fornasier,
L. Bernasconi,
R. Behrend,
F. Vachier,
A. Kryszczynska,
M. Polinska,
M. Fulchignoni,
R. Roy,
R. Naves,
R. Poncy,
P. Wiggins
Abstract:
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical light…
▽ More
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical lightcurves, disk-resolved images, and stellar occultations, although the latter are not available for (21) Lutetia.
Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of (λ = 52 deg., β = -6 deg.) in Ecliptic J2000 reference frame (equatorial α = 52 deg., δ = +12 deg.), and determine an improved sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on" and more rectangular as seen "equator-on". The best-fit model suggests the presence of several concavities. The largest of these is close to the north pole and may be associated with large impacts.
△ Less
Submitted 17 June, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
The triaxial ellipsoid dimensions, rotational pole, and bulk density of ESA Rosetta target asteroid (21) Lutetia
Authors:
J. D. Drummond,
A. Conrad,
W. J. Merline,
B. Carry,
C. R. Chapman,
H. A. Weaver,
P. M. Tamblyn,
J. C. Christou,
C. Dumas
Abstract:
We seek the best size estimates of the asteroid (21) Lutetia, the direction of its spin axis, and its bulk density, assuming its shape is well described by a smooth featureless triaxial ellipsoid, and to evaluate the deviations from this assumption. Methods. We derive these quantities from the outlines of the asteroid in 307 images of its resolved apparent disk obtained with adaptive optics (AO) a…
▽ More
We seek the best size estimates of the asteroid (21) Lutetia, the direction of its spin axis, and its bulk density, assuming its shape is well described by a smooth featureless triaxial ellipsoid, and to evaluate the deviations from this assumption. Methods. We derive these quantities from the outlines of the asteroid in 307 images of its resolved apparent disk obtained with adaptive optics (AO) at Keck II and VLT, and combine these with recent mass determinations to estimate a bulk density. Our best triaxial ellipsoid diameters for Lutetia, based on our AO images alone, are a x b x c = 132 x 101 x 93 km, with uncertainties of 4 x 3 x 13 km including estimated systematics, with a rotational pole within 5 deg. of ECJ2000 [long,lat] = [45, -7], or EQJ2000 [RA, DEC] = [44, +9]. The AO model fit itself has internal precisions of 1 x 1 x 8 km, but it is evident, both from this model derived from limited viewing aspects and the radius vector model given in a companion paper, that Lutetia has significant departures from an idealized ellipsoid. In particular, the long axis may be overestimated from the AO images alone by about 10 km. Therefore, we combine the best aspects of the radius vector and ellipsoid model into a hybrid ellipsoid model, as our final result, of 124 +/- 5 x 101 +/- 4 x 93 +/- 13 km that can be used to estimate volumes, sizes, and projected areas. The adopted pole position is within 5 deg. of [long, lat] = [52, -6] or[RA DEC] = [52, +12]. Using two separately determined masses and the volume of our hybrid model, we estimate a density of 3.5 +/- 1.1 or 4.3 +/- 0.8 g cm-3 . From the density evidence alone, we argue that this favors an enstatite-chondrite composition, although other compositions are formally allowed at the extremes (low-porosity CV/CO carbonaceous chondrite or high-porosity metallic). We discuss this in the context of other evidence.
△ Less
Submitted 17 June, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.