-
Probing the structure of a massive filament: ArTeMiS 350 and 450 micron map** of the integral-shaped filament in Orion A
Authors:
F. Schuller,
Ph. André,
Y. Shimajiri,
A. Zavagno,
N. Peretto,
D. Arzoumanian,
T. Csengeri,
V. Könyves,
P. Palmeirim,
S. Pezzuto,
A. Rigby,
H. Roussel,
H. Ajeddig,
L. Dumaye,
P. Gallais,
J. Le Pennec,
J. Martignac,
M. Mattern,
V. Revéret,
L. Rodriguez,
M. Talvard
Abstract:
(abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover exten…
▽ More
(abridged) Within the Orion A molecular cloud, the integral-shaped filament (ISF) is a prominent, degree-long structure of dense gas and dust, with clear signs of recent and on-going high-mass star formation. We used the ArTeMiS bolometer camera at APEX to map a 0.6x0.2 deg^2 region covering OMC-1, OMC-2, OMC-3 at 350 and 450 micron. We combined these data with Herschel-SPIRE maps to recover extended emission. The combined Herschel-ArTeMiS maps provide details on the distribution of dense, cold material, with a high spatial dynamic range, from our 8'' resolution (0.016 pc) up to the size of the map ~10-15 deg. By combining Herschel and ArTeMiS data at 160, 250, 350 and 450 micron, we constructed high-resolution temperature and H2 column density maps. We extracted radial profiles from the column density map in several, representative portions of the ISF, that we fitted with Gaussian and Plummer models to derive their intrinsic widths. We also compared the distribution of material traced by ArTeMiS with that seen in the higher density tracer N2H+(1-0) recently observed with the ALMA interferometer. All the radial profiles that we extracted show clear deviation from a Gaussian, with evidence for an inner plateau, previously not seen using Herschel-only data. We measure intrinsic half-power widths in the range 0.06 to 0.11 pc. This is significantly larger than the Gaussian widths measured for fibers seen in N2H+, which probably traces only the dense innermost regions of the large-scale filament. These half-power widths are within a factor of two of the value of 0.1 pc found for a large sample of nearby filaments in various low-mass star-forming regions, which tends to indicate that the physical conditions governing the fragmentation of prestellar cores within transcritical or supercritical filaments are the same over a large range of masses per unit length.
△ Less
Submitted 26 May, 2021; v1 submitted 8 April, 2021;
originally announced April 2021.
-
Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArTéMiS
Authors:
Ph. André,
V. Revéret,
V. Könyves,
D. Arzoumanian,
J. Tigé,
P. Gallais,
H. Roussel,
J. Le Pennec,
L. Rodriguez,
E. Doumayrou,
D. Dubreuil,
M. Lortholary,
J. Martignac,
M. Talvard,
C. Delisle,
F. Visticot,
L. Dumaye,
C. De Breuck,
Y. Shimajiri,
F. Motte,
S. Bontemps,
M. Hennemann,
A. Zavagno,
D. Russeil,
N. Schneider
, et al. (6 additional authors not shown)
Abstract:
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by superson…
▽ More
Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation.
We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc.
Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
The ArTéMiS wide-field submillimeter camera: preliminary on-sky performances at 350 microns
Authors:
Vincent Reveret,
Philippe André,
Jean Le Pennec,
Michel Talvard,
Patrick Agnèse,
Agnès Arnaud,
Laurent Clerc,
Carlos de Breuck,
Jean-Charles Cigna,
Cyrille Delisle,
Eric Doumayrou,
Lionel Duband,
Didier Dubreuil,
Luc Dumaye,
Eric Ercolani,
Pascal Gallais,
Elodie Groult,
Thierry Jourdan,
Bernadette Leriche,
Bruno Maffei,
Michel Lortholary,
Jérôme Martignac,
Wilfried Rabaud,
Johan Relland,
Louis Rodriguez
, et al. (2 additional authors not shown)
Abstract:
ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and Un…
▽ More
ArTeMiS is a wide-field submillimeter camera operating at three wavelengths simultaneously (200, 350 and 450 microns). A preliminary version of the instrument equipped with the 350 microns focal plane, has been successfully installed and tested on APEX telescope in Chile during the 2013 and 2014 austral winters. This instrument is developed by CEA (Saclay and Grenoble, France), IAS (France) and University of Manchester (UK) in collaboration with ESO. We introduce the mechanical and optical design, as well as the cryogenics and electronics of the ArTeMiS camera. ArTeMiS detectors are similar to the ones developed for the Herschel PACS photometer but they are adapted to the high optical load encountered at APEX site. Ultimately, ArTeMiS will contain 4 sub-arrays at 200 microns and 2x8 sub-arrays at 350 and 450 microns. We show preliminary lab measurements like the responsivity of the instrument to hot and cold loads illumination and NEP calculation. Details on the on-sky commissioning runs made in 2013 and 2014 at APEX are shown. We used planets (Mars, Saturn, Uranus) to determine the flat-field and to get the flux calibration. A pointing model was established in the first days of the runs. The average relative pointing accuracy is 3 arcsec. The beam at 350 microns has been estimated to be 8.5 arcsec, which is in good agreement with the beam of the 12 m APEX dish. Several observing modes have been tested, like On-The-Fly for beam-maps or large maps, spirals or raster of spirals for compact sources. With this preliminary version of ArTeMiS, we concluded that the map** speed is already more than 5 times better than the previous 350 microns instrument at APEX. The median NEFD at 350 microns is 600 mJy.s1/2, with best values at 300 mJy.s1/2. The complete instrument with 5760 pixels and optimized settings will be installed during the first half of 2015.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
Resolving the Vela C ridge with P-ArTeMiS and Herschel
Authors:
T. Hill,
Ph. Andre,
D. Arzoumanian,
F. Motte,
V. Minier,
A. Menshchikov,
P. Didelon,
M. Hennemann,
V. Konyves,
Q. Nguyen-Luong,
P. Palmeirim,
N. Peretto,
N. Schneider,
S. Bontemps,
F. Louvet,
D. Elia,
T. Giannini,
V. Reveret,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
P. Gallais,
M. Lortholary
, et al. (3 additional authors not shown)
Abstract:
We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the…
▽ More
We present APEX/P-ArTéMiS 450μm continuum observations of RCW 36 and the adjacent ridge, a high-mass high-column density filamentary structure at the centre of the Vela C molecular cloud. These observations, at higher resolution than Herschel's SPIRE camera, reveal clear fragmentation of the central star-forming ridge. Combined with PACS far-infrared and SPIRE sub-millimetre observations from the Herschel HOBYS project we build a high resolution column density map of the region mapped with P-ArTéMiS. We extract the radial density profile of the Vela C ridge which with a ~ 0.1pc central width is consistent with that measured for low-mass star-forming filaments in the Herschel Gould Belt survey. Direct comparison with Serpens South, of the Gould Belt Aquila complex, reveals many similarities between the two regions. Despite likely different formation mechanisms and histories, the Vela C ridge and Serpens South filament share common characteristics, including their filament central widths.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
Evidence of triggered star formation in G327.3-0.6. Dust-continuum map** of an infrared dark cloud with P-ArTéMiS
Authors:
V. Minier,
Ph. André,
P. Bergman,
F. Motte,
F. Wyrowski,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
P. Gallais,
G. Hamon,
P. -O. Lagage,
M. Lortholary,
J. Martignac,
V. Revéret,
H. Roussel,
M. Talvard,
G. Willmann,
H. Olofsson
Abstract:
Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in…
▽ More
Aims. Expanding HII regions and propagating shocks are common in the environment of young high-mass star-forming complexes. They can compress a pre-existing molecular cloud and trigger the formation of dense cores. We investigate whether these phenomena can explain the formation of high-mass protostars within an infrared dark cloud located at the position of G327.3-0.6 in the Galactic plane, in between two large infrared bubbles and two HII regions. Methods: The region of G327.3-0.6 was imaged at 450 ? m with the CEA P-ArTéMiS bolometer array on the Atacama Pathfinder EXperiment telescope in Chile. APEX/LABOCA and APEX-2A, and Spitzer/IRAC and MIPS archives data were used in this study. Results: Ten massive cores were detected in the P-ArTéMiS image, embedded within the infrared dark cloud seen in absorption at both 8 and 24 ?m. Their luminosities and masses indicate that they form high-mass stars. The kinematical study of the region suggests that the infrared bubbles expand toward the infrared dark cloud. Conclusions: Under the influence of expanding bubbles, star formation occurs in the infrared dark areas at the border of HII regions and infrared bubbles.
△ Less
Submitted 17 July, 2009;
originally announced July 2009.
-
First 450-micron dust continuum map** of the massive star-forming region NGC 3576 with the P-ArTeMiS bolometer camera
Authors:
P. André,
V. Minier,
P. Gallais,
V. Reveret,
J. Le Pennec,
L. Rodriguez,
O. Boulade,
E. Doumayrou,
D. Dubreuil,
M. Lortholary,
J. Martignac,
M. Talvard,
C. De Breuck,
G. Hamon,
N. Schneider,
S. Bontemps,
P. O. Lagage,
E. Pantin,
H. Roussel,
M. Miller,
C. R. Purcell,
T. Hill,
J. Stutzki
Abstract:
Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron…
▽ More
Context: The earliest phases of massive star formation are currently much debated. Aims. In an effort to make progress, we took a census of Class0-like protostellar dense cores in the NGC 3576 region, one of the nearest and most luminous embedded sites of high-mass star formation in the Galaxy. Methods: We used the P-ArTeMiS bolometer camera on the APEX telescope to produce the first 450-micron dust continuum map of the filamentary dense clump associated with NGC 3576. Results: Combining our 450-micron observations with existing data at other wavelengths, we have identified seven massive protostellar sources along the NGC 3576 filament and placed them in the M_env - L_bol evolutionary diagram for protostars. Conclusions: Comparison with theoretical evolutionary tracks suggests that these seven protostellar sources will evolve into massive stars with masses M* ~ 15-50 Msun. Four sources are classified as candidate high-mass Class 0 objects, two sources as massive Class I objects, and one source appears to be at an intermediate stage.
△ Less
Submitted 23 September, 2008;
originally announced September 2008.
-
Submillimetre/TeraHertz Astronomy at Dome C with CEA filled bolometer array
Authors:
Vincent Minier,
Gilles Durand,
Pierre-Olivier Lagage,
Michel Talvard,
Tony Travouillon,
Maurizio Busso,
Gino Tosti
Abstract:
Submillimetre/TeraHertz (e.g. 200, 350, 450 microns) astronomy is the prime technique to unveil the birth and early evolution of a broad range of astrophysical objects. A major obstacle to carry out submm observations from ground is the atmosphere. Preliminary site testing and atmospheric transmission models tend to demonstrate that Dome C could offer the best conditions on Earth for submm/THz a…
▽ More
Submillimetre/TeraHertz (e.g. 200, 350, 450 microns) astronomy is the prime technique to unveil the birth and early evolution of a broad range of astrophysical objects. A major obstacle to carry out submm observations from ground is the atmosphere. Preliminary site testing and atmospheric transmission models tend to demonstrate that Dome C could offer the best conditions on Earth for submm/THz astronomy. The CAMISTIC project aims to install a filled bolometer-array camera with 16x16 pixels on IRAIT at Dome C and explore the 200-$μ$m windows for potential ground-based observations.
△ Less
Submitted 19 February, 2007;
originally announced February 2007.
