-
Smart structural health monitoring (SHM) system for on-board localization of defects in pipes using torsional ultrasonic guided waves
Authors:
Sheetal Patil,
Sauvik Banerjee,
Siddharth Tallur
Abstract:
Most reported research for monitoring health of pipelines using ultrasonic guided waves (GW) typically utilize bulky piezoelectric transducer rings and laboratory-grade ultrasonic non-destructive testing (NDT) equipment. Consequently, the translation of these approaches from laboratory settings to field-deployable systems for real-time structural health monitoring (SHM) becomes challenging. In thi…
▽ More
Most reported research for monitoring health of pipelines using ultrasonic guided waves (GW) typically utilize bulky piezoelectric transducer rings and laboratory-grade ultrasonic non-destructive testing (NDT) equipment. Consequently, the translation of these approaches from laboratory settings to field-deployable systems for real-time structural health monitoring (SHM) becomes challenging. In this work, we present an innovative algorithm for damage identification and localization in pipes, implemented on a compact FPGA-based smart GW-SHM system. The custom-designed board, featuring a Xilinx Artix-7 FPGA and front-end electronics, is capable of actuating the PZT thickness shear mode transducers, data acquisition and recording from PZT sensors and generating a damage index (DI) map for localizing the damage on the structure. The algorithm is a variation of the common source method adapted for cylindrical geometry. The utility of the algorithm is demonstrated for detection and localization of defects such as notch and mass loading on a steel pipe, through extensive finite element (FE) method simulations. Experimental results obtained using a C-clamp for applying mass loading on the pipe show good agreement with the FE simulations. The localization error values for experimental data analyzed using C code on a processor implemented on the FPGA are consistent with algorithm results generated on a computer running MATLAB code. The system presented in this study is suitable for a wide range of GW-SHM applications, especially in cost-sensitive scenarios that benefit from on-node signal processing over cloud-based solutions.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
High dynamic-range and portable magnetometer using ensemble nitrogen-vacancy centers in diamond
Authors:
Himanshu Kumar,
Dasika Shishir,
Maheshwar Mangat,
Siddharth Tallur,
Kasturi Saha
Abstract:
Nitrogen vacancy (NV) centers in diamonds have been explored for realizing a wide range of sensing applications in the last decade due to their unique quantum properties. Here we realize a compact and portable magnetometer with an ensemble of NV centers which we call the Quantum MagPI (Quantum Magnetometer with Proportional Integral control). Including the sensor head and associated electronics, o…
▽ More
Nitrogen vacancy (NV) centers in diamonds have been explored for realizing a wide range of sensing applications in the last decade due to their unique quantum properties. Here we realize a compact and portable magnetometer with an ensemble of NV centers which we call the Quantum MagPI (Quantum Magnetometer with Proportional Integral control). Including the sensor head and associated electronics, our sensor assembly can fit inside 10 cm x 10 cm x 7 cm box and control electronics in 30 cm x 25 cm x 5 cm box. We achieve a bandwidth normalized sensitivity of ~ 10 nT/sqrt(Hz). Using closed-loop feedback for locking to the resonance frequency, we extend the linear dynamic range to 200 microT (20x improvement compared to the intrinsic dynamic range) without compromising the sensitivity. We report a detailed performance analysis of the magnetometer through measurements of noise spectra, Allan deviation, and tracking of nT-level magnetic fields in real-time. Additionally, we demonstrate the utility of such a magnetometer by real-time tracking the movement of the elevator car and door opening by measuring the projection of the magnetic field along one of the NV-axes under ambient temperature and humidity.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Classification of Various Types of Damages in Honeycomb Composite Sandwich Structures using Guided Wave Structural Health Monitoring
Authors:
Shruti Sawant,
Jeslin Thalapil,
Siddharth Tallur,
Sauvik Banerjee,
Amit Sethi
Abstract:
Classification of damages in honeycomb composite sandwich structure (HCSS) is important to decide remedial actions. However, previous studies have only detected damages using deviations of monitoring signal from healthy (baseline) using a guided wave (GW) based structural health monitoring system. Classification between various types of damages has not been reported for challenging cases. We show…
▽ More
Classification of damages in honeycomb composite sandwich structure (HCSS) is important to decide remedial actions. However, previous studies have only detected damages using deviations of monitoring signal from healthy (baseline) using a guided wave (GW) based structural health monitoring system. Classification between various types of damages has not been reported for challenging cases. We show that using careful feature engineering and machine learning it is possible to classify between various types of damages such as core crush (CC), high density core (HDC), lost film adhesive (LFA) and teflon release film (TRF). We believe that we are the first to report numerical models for four types of damages in HCSS, which is followed up with experimental validation. We found that two out of four damages affect the GW signal in a particularly similar manner. We extracted and evaluated multiple features from time as well as frequency domains, and also experimented with features relative to as baseline as well as those that were baseline-free. Using Pearson's correlation coefficient based filtering, redundant features were eliminated. Finally, using an optimal feature set determined using feature elimination, high accuracy was achieved with a random forest classifier on held-out signals. For evaluating performance of the proposed method for different damage sizes, we used simulated data obtained from extensive parametric studies and got an accuracy of 77.89%. Interpretability studies to determine importance of various features showed that features computed using the baseline signal prove more effective as compared to baseline-free features.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Unsupervised deep learning framework for temperature-compensated damage assessment using ultrasonic guided waves on edge device
Authors:
Pankhi Kashyap,
Kajal Shivgan,
Sheetal Patil,
Ramana Raja B,
Sagar Mahajan,
Sauvik Banerjee,
Siddharth Tallur
Abstract:
Fueled by the rapid development of machine learning (ML) and greater access to cloud computing and graphics processing units (GPUs), various deep learning based models have been proposed for improving performance of ultrasonic guided wave structural health monitoring (GW-SHM) systems, especially to counter complexity and heterogeneity in data due to varying environmental factors (e.g., temperature…
▽ More
Fueled by the rapid development of machine learning (ML) and greater access to cloud computing and graphics processing units (GPUs), various deep learning based models have been proposed for improving performance of ultrasonic guided wave structural health monitoring (GW-SHM) systems, especially to counter complexity and heterogeneity in data due to varying environmental factors (e.g., temperature) and types of damages. Such models typically comprise of millions of trainable parameters, and therefore add to cost of deployment due to requirements of cloud connectivity and processing, thus limiting the scale of deployment of GW-SHM. In this work, we propose an alternative solution that leverages TinyML framework for development of light-weight ML models that could be directly deployed on embedded edge devices. The utility of our solution is illustrated by presenting an unsupervised learning framework for damage detection in honeycomb composite sandwich structure (HCSS) with disbond and delamination type of damages, validated using data generated by finite element (FE) simulations and experiments performed at various temperatures in the range 0°C to 90°C. We demonstrate a fully-integrated solution using a Xilinx Artix-7 FPGA for data acquisition and control, and edge-inference of damage.
△ Less
Submitted 8 October, 2023;
originally announced October 2023.
-
Beyond 5 GHz excitation of a ZnO-based high-overtone bulk acoustic resonator on SiC substrate
Authors:
Padmalochan Panda,
Soumyadip Chatterjee,
Siddharth Tallur,
Apurba Laha
Abstract:
This work describes the fabrication and characterization of an Au/ZnO/Pt-based high-overtone bulk acoustic resonator (HBAR) on SiC substrates. We evaluate its microwave characteristics comparing with Si substrates for micro-electromechanical applications. Dielectric magnetron sputtering and an electron beam evaporator are employed to develop highly c-axis-oriented ZnO films and metal electrodes. T…
▽ More
This work describes the fabrication and characterization of an Au/ZnO/Pt-based high-overtone bulk acoustic resonator (HBAR) on SiC substrates. We evaluate its microwave characteristics comparing with Si substrates for micro-electromechanical applications. Dielectric magnetron sputtering and an electron beam evaporator are employed to develop highly c-axis-oriented ZnO films and metal electrodes. The crystal structure and surface morphology of post-growth layers have been characterized using X-ray diffraction (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM) techniques. HBAR on SiC substrate results in multiple longitudinal bulk acoustic wave resonances up to 7 GHz, with the strongest excited resonances emerging at 5.25 GHz. The value of f.Q (Resonance frequency * Quality factor) parameter obtained using a novel Q approach method for HBAR on SiC substrate is 4.1 * 10^13 Hz which, to the best of our knowledge, is the highest among all reported values for specified ZnO-based devices.
△ Less
Submitted 9 April, 2023;
originally announced April 2023.
-
Daksha: On Alert for High Energy Transients
Authors:
Varun Bhalerao,
Santosh Vadawale,
Shriharsh Tendulkar,
Dipankar Bhattacharya,
Vikram Rana,
Hitesh Kumar L. Adalja,
Hrishikesh Belatikar,
Mahesh Bhaganagare,
Gulab Dewangan,
Abhijeet Ghodgaonkar,
Shiv Kumar Goyal,
Suresh Gunasekaran,
P J Guruprasad,
Jayprakash G. Koyande,
Salil Kulkarni,
APK Kutty,
Tinkal Ladiya,
Deepak Marla,
Sujay Mate,
N. P. S. Mithun,
Rakesh Mote,
Sanjoli Narang,
Ayush Nema,
Sudhanshu Nimbalkar,
Archana Pai
, et al. (23 additional authors not shown)
Abstract:
We present Daksha, a proposed high energy transients mission for the study of electromagnetic counterparts of gravitational wave sources, and gamma ray bursts. Daksha will comprise of two satellites in low earth equatorial orbits, on opposite sides of earth. Each satellite will carry three types of detectors to cover the entire sky in an energy range from 1 keV to >1 MeV. Any transients detected o…
▽ More
We present Daksha, a proposed high energy transients mission for the study of electromagnetic counterparts of gravitational wave sources, and gamma ray bursts. Daksha will comprise of two satellites in low earth equatorial orbits, on opposite sides of earth. Each satellite will carry three types of detectors to cover the entire sky in an energy range from 1 keV to >1 MeV. Any transients detected on-board will be announced publicly within minutes of discovery. All photon data will be downloaded in ground station passes to obtain source positions, spectra, and light curves. In addition, Daksha will address a wide range of science cases including monitoring X-ray pulsars, studies of magnetars, solar flares, searches for fast radio burst counterparts, routine monitoring of bright persistent high energy sources, terrestrial gamma-ray flashes, and probing primordial black hole abundances through lensing. In this paper, we discuss the technical capabilities of Daksha, while the detailed science case is discussed in a separate paper.
△ Less
Submitted 27 January, 2024; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Science with the Daksha High Energy Transients Mission
Authors:
Varun Bhalerao,
Disha Sawant,
Archana Pai,
Shriharsh Tendulkar,
Santosh Vadawale,
Dipankar Bhattacharya,
Vikram Rana,
Hitesh Kumar L. Adalja,
G C Anupama,
Suman Bala,
Smaranika Banerjee,
Judhajeet Basu,
Hrishikesh Belatikar,
Paz Beniamini,
Mahesh Bhaganagare,
Ankush Bhaskar,
Soumyadeep Bhattacharjee,
Sukanta Bose,
Brad Cenko,
Mehul Vijay Chanda,
Gulab Dewangan,
Vishal Dixit,
Anirban Dutta,
Priyanka Gawade,
Abhijeet Ghodgaonkar
, et al. (50 additional authors not shown)
Abstract:
We present the science case for the proposed Daksha high energy transients mission. Daksha will comprise of two satellites covering the entire sky from 1~keV to $>1$~MeV. The primary objectives of the mission are to discover and characterize electromagnetic counterparts to gravitational wave source; and to study Gamma Ray Bursts (GRBs). Daksha is a versatile all-sky monitor that can address a wide…
▽ More
We present the science case for the proposed Daksha high energy transients mission. Daksha will comprise of two satellites covering the entire sky from 1~keV to $>1$~MeV. The primary objectives of the mission are to discover and characterize electromagnetic counterparts to gravitational wave source; and to study Gamma Ray Bursts (GRBs). Daksha is a versatile all-sky monitor that can address a wide variety of science cases. With its broadband spectral response, high sensitivity, and continuous all-sky coverage, it will discover fainter and rarer sources than any other existing or proposed mission. Daksha can make key strides in GRB research with polarization studies, prompt soft spectroscopy, and fine time-resolved spectral studies. Daksha will provide continuous monitoring of X-ray pulsars. It will detect magnetar outbursts and high energy counterparts to Fast Radio Bursts. Using Earth occultation to measure source fluxes, the two satellites together will obtain daily flux measurements of bright hard X-ray sources including active galactic nuclei, X-ray binaries, and slow transients like Novae. Correlation studies between the two satellites can be used to probe primordial black holes through lensing. Daksha will have a set of detectors continuously pointing towards the Sun, providing excellent hard X-ray monitoring data. Closer to home, the high sensitivity and time resolution of Daksha can be leveraged for the characterization of Terrestrial Gamma-ray Flashes.
△ Less
Submitted 27 January, 2024; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Effectiveness of Multi-Physics Numerical Model in Simulating Accelerated Corrosion with Spatial and Temporal Non Uniformity
Authors:
Shanmukha Shetty,
Sauvik Banerjee,
Siddharth Tallur,
Yogesh M. Desai
Abstract:
This study is motivated by the need to develop an efficient numerical model to simulate non-uniform interfacial degradation of reinforcing steel in concrete in an accelerated corrosion setup. In this study, a multi physics finite element (FE) model is presented that takes into consideration the spatial and temporal non uniformity of corrosion induced degradation in rebar, and eliminates the assump…
▽ More
This study is motivated by the need to develop an efficient numerical model to simulate non-uniform interfacial degradation of reinforcing steel in concrete in an accelerated corrosion setup. In this study, a multi physics finite element (FE) model is presented that takes into consideration the spatial and temporal non uniformity of corrosion induced degradation in rebar, and eliminates the assumption of uniform mass loss and its linear variation with time as per available literature that uses classical approach of Faraday's law. The model is validated experimentally with accelerated corrosion setup designed to induce partial corrosion. Further, the possibility of extending this model to monitor natural corrosion is discussed with required modifications. Unlike previous studies, pore saturation (PS) is continuously monitored and its existing experimental correlations with electrolyte conductivity and oxygen diffusivity in the vicinity of partial corrosion are adopted so that the model can be extended to simulate natural corrosion. These evaluations can be made completely nondestructive and in real time to capture the influence of local environment. The proposed methodology also captures the effect of differential aeration pertaining to local exposure. Therefore, the challenges in incorporating influence of local environment by the use of alternative parameters such as relative humidity from real climate change predictions are eliminated. It is shown that the multi-physics model is effective and convenient to simulate the non-uniform time dependent mass loss with acceptable accuracy and that its capability can be extended to monitor natural non uniform corrosion on a space time frame.
△ Less
Submitted 22 December, 2021;
originally announced December 2021.
-
Environmental variation compensated damage classification and localization in ultrasonic guided wave SHM using self-learnt features and Gaussian mixture models
Authors:
Shruti Sawant,
Sheetal Patil,
Jeslin Thalapil,
Sauvik Banerjee,
Siddharth Tallur
Abstract:
Conventional damage localization algorithms used in ultrasonic guided wave-based structural health monitoring (GW-SHM) rely on physics-defined features of GW signals. In addition to requiring domain knowledge of the interaction of various GW modes with various types of damages, they also suffer from errors due to variations in environmental and operating conditions (EOCs) in practical use cases. W…
▽ More
Conventional damage localization algorithms used in ultrasonic guided wave-based structural health monitoring (GW-SHM) rely on physics-defined features of GW signals. In addition to requiring domain knowledge of the interaction of various GW modes with various types of damages, they also suffer from errors due to variations in environmental and operating conditions (EOCs) in practical use cases. While several machine learning tools have been reported for EOC compensation, they need to be custom-designed for each combination of damage and structure due to their dependence on physics-defined feature extraction. In this work, we propose a CNN-based automated feature extraction framework coupled with Gaussian mixture model (GMM) based EOC compensation and damage classification and localization method. Features learnt by the CNNs are used for damage classification and localization of damage by modeling the probability distribution of the features using GMMs. The Kullback-Leibler (KL) divergence of these GMMs with respect to corresponding baseline GMMs are used as signal difference coefficients (SDCs) to compute damage indices (DIs) along various GW sensor paths, and thus for damage localization. The efficacy of the proposed method is demonstrated using FE generated GW-data for an aluminum plate with a network of six lead zirconate titanate (PZT) sensors, for three different types of damages (rivet hole, added mass, notch) at various temperatures, with added white noise and pink noise to incorporate errors due to EOCs. We also present experimental validation of the method through characterization of notch damage in an aluminum panel under varying and non-uniform temperature profiles, using a portable custom-designed field programmable gate array (FPGA) based signal transduction and data acquisition system.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
Design and analysis of electro-optic modulators based on high contrast gratings (HCGs) in AlGaN/GaN heterostructures
Authors:
Pallabi Das,
Shlok Vaibhav Singh,
Siddharth Tallur
Abstract:
Recently High Electron Mobility Transistor (HEMT) inspired III-V electro-optic modulator topologies were proposed for realizing high speed electro-optic modulators leveraging plasma dispersion effect due to the 2D Electron Gas (2DEG) present at the III-V heterostructure interface. The 2DEG is highly confined at the interface, extending to very low depths in the bulk ($\approx$10nm) and therefore h…
▽ More
Recently High Electron Mobility Transistor (HEMT) inspired III-V electro-optic modulator topologies were proposed for realizing high speed electro-optic modulators leveraging plasma dispersion effect due to the 2D Electron Gas (2DEG) present at the III-V heterostructure interface. The 2DEG is highly confined at the interface, extending to very low depths in the bulk ($\approx$10nm) and therefore has limited spatial overlap with the optical mode. In this paper, we propose a novel modulator design to boost the 2DEG-light interaction, wherein the HEMT is embedded within a high contrast grating (HCG) mirror. We present an analytical model extending the conventional HCG model to multi-layer structures and observe good agreement with rigorous coupled-wave analysis (RCWA). We explore the design space for identifying optimal device topology and present geometries that produce a change in reflectivity as large as 70% for C- and L-band wavelengths. We also present results of sensitivity analysis and observe low variation in device performance due to geometry variation arising from device fabrication imperfections. The device platforms presented here are suitable for designing high efficiency electro-optic modulators by incorporating the HEMT HCG into a Fabry-Perot cavity.
△ Less
Submitted 6 October, 2020;
originally announced November 2020.
-
Smart cathodic protection system for real-time quantitative assessment of corrosion of sacrificial anode based on Electro-Mechanical Impedance (EMI)
Authors:
Durgesh Tamhane,
Jeslin Thalapil,
Sauvik Banerjee,
Siddharth Tallur
Abstract:
Corrosion of metal structures is often prevented using cathodic protection systems, that employ sacrificial anodes that corrode more preferentially relative to the metal to be protected. In-situ monitoring of these sacrificial anodes during early stages of their useful life could offer several insights into deterioration of the material surrounding the infrastructure as well as serve as early warn…
▽ More
Corrosion of metal structures is often prevented using cathodic protection systems, that employ sacrificial anodes that corrode more preferentially relative to the metal to be protected. In-situ monitoring of these sacrificial anodes during early stages of their useful life could offer several insights into deterioration of the material surrounding the infrastructure as well as serve as early warning indicator for preventive maintenance of critical infrastructure. In this paper, we present an Electro-Mechanical Impedance (EMI) measurement-based technique to quantify extent of corrosion of a zinc sacrificial anode without manual intervention. The detection apparatus consists of a lead zirconate titanate (PZT) transducer affixed onto a circular zinc disc, with waterproofing epoxy protecting the transducer element when the assembly is submerged in liquid electrolyte (salt solution) for accelerated corrosion by means of impressed current. We develop an analytical model for discerning the extent of corrosion by monitoring shift in resonance frequency for in-plane radial expansion mode of the disc, that also accurately models the nonlinearity introduced by partial delamination of the corrosion product (zinc oxide) from the disc. The analytical model thus developed shows excellent agreement with Finite Element Analysis (FEA) and experimental results. Our work establishes the efficacy of the proposed technique for monitoring the state of health of sacrificial anodes in their early stage of deterioration and could thus be widely adopted for structural health monitoring applications within the internet of things.
△ Less
Submitted 14 December, 2020; v1 submitted 22 November, 2020;
originally announced November 2020.
-
Low cost passive pH sensor fabricated on scotch tape
Authors:
Ayan Majumder,
Subrat Kumar Pradhan,
Kasturi Saha,
Siddharth Tallur
Abstract:
We report the fabrication and characterization results of a simple and low-cost pH sensor fabricated using a graphite pencil to define a working electrode and silver paste to define a reference electrode on scotch tape. The sensor operation is based on potentiometric measurement and thereby insensitive to fabrication variations in shape of the electrode unlike amperometric and chemiresistive measu…
▽ More
We report the fabrication and characterization results of a simple and low-cost pH sensor fabricated using a graphite pencil to define a working electrode and silver paste to define a reference electrode on scotch tape. The sensor operation is based on potentiometric measurement and thereby insensitive to fabrication variations in shape of the electrode unlike amperometric and chemiresistive measurement techniques. The substrate of the disposable sensor is prepared by pasting scotch tape atop a piece of chart paper, and two types of sensors fabricated with 6B and 2B graphite pencils are tested with three solutions with different pH values. The sensor functions as a passive sensing tag without requiring any external power or stimulus, and the measured sensitivities of the pH sensors fabricated using 2B and 6B pencil carbon electrodes (PCEs) are $-4.54mV/pH$ and $-4.09mV/pH$ respectively.
△ Less
Submitted 13 January, 2020;
originally announced January 2020.
-
Phase sensitive detection of extent of corrosion in steel reinforcing bars using eddy currents
Authors:
Indrani Mukherjee,
**it Patil,
Sauvik Banerjee,
Siddharth Tallur
Abstract:
Corrosion of steel bars in reinforced cement concrete (RCC) structures leads to premature deterioration and increase in life cycle maintenance costs. Non-destructive testing (NDT) of incipient corrosion has been an impending task in this domain. We present a low cost sensing platform based on eddy current detection using anisotropic magnetoresistive (AMR) sensor to measure the extent of corrosion…
▽ More
Corrosion of steel bars in reinforced cement concrete (RCC) structures leads to premature deterioration and increase in life cycle maintenance costs. Non-destructive testing (NDT) of incipient corrosion has been an impending task in this domain. We present a low cost sensing platform based on eddy current detection using anisotropic magnetoresistive (AMR) sensor to measure the extent of corrosion in steel reinforcing bars (rebars). The scheme employs phase-sensitive detection, wherein the phase shift in the sensor output (proportional to surface conductivity of the rebar) relative to the reference stimulus is measured by a lock-in amplifier and used to distinguish corroded and non-corroded rebars. The proof-of-concept sensor demonstration is able to resolve varying extents of rebar corrosion and can find potential applications as an NDT tool in a variety of industries.
△ Less
Submitted 11 January, 2020;
originally announced January 2020.
-
Large $d_{33}$ Piezoelectric-Polymer Composites For RF Acoustic Resonators
Authors:
Pallabi Das,
Siddharth Tallur
Abstract:
While piezoelectric transduction enables designing acoustic resonators operating at multi-GHz frequencies, the deposition of piezoelectric materials typically requires high temperature processes and specific crystallographic orientation of substrates, thus imposing a limitation on materials that could be used. In this paper we present a piezoelectrically transduced thickness mode acoustic resonato…
▽ More
While piezoelectric transduction enables designing acoustic resonators operating at multi-GHz frequencies, the deposition of piezoelectric materials typically requires high temperature processes and specific crystallographic orientation of substrates, thus imposing a limitation on materials that could be used. In this paper we present a piezoelectrically transduced thickness mode acoustic resonator that employs piezoelectric (PMNPT) nanoparticles embedded in a polymer (SU8) matrix. This composite material is deposited using standard resist-spin coaters and is thus compatible with a variety of substrates. The device presented here uses a double side polished single crystal silicon wafer as the low loss acoustic substrate for the resonator and $1.7μm$ thick SU8-PMNPT composite film as the actuator, and exhibits large effective piezoelectric coefficient $(d_{33})$ of $216pm/V$, and we experimentally demonstrate efficient transduction of acoustic resonances at frequencies up to $1.5GHz$.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.
-
Design and analysis of high electron mobility transistor (HEMT) inspired III-V electro-optic modulator topologies
Authors:
Pallabi Das,
Tian-Li Wu,
Siddharth Tallur
Abstract:
III-V heterostructure based high electron mobility transistors (HEMTs) offer superior performance as compared to CMOS silicon transistors owing to the high mobility in the 2D electron gas (2DEG) channel at the heterostructure interface. Gallium nitride (GaN) based HEMTs are also suitable for high power and high temperature applications. GaN has a rich offering of material properties spanning domai…
▽ More
III-V heterostructure based high electron mobility transistors (HEMTs) offer superior performance as compared to CMOS silicon transistors owing to the high mobility in the 2D electron gas (2DEG) channel at the heterostructure interface. Gallium nitride (GaN) based HEMTs are also suitable for high power and high temperature applications. GaN has a rich offering of material properties spanning domains of nonlinear optics, piezoelectric micro-electro-mechanical systems (MEMS), and monolithic microwave integrated circuits (MMICs). In this paper, we propose HEMT inspired III-V electro-optic modulator topologies that could potentially outperform silicon photonic modulators. We analyze the electroabsorption and electrorefraction on account of the 2DEG interaction with light and present a design framework to selectively leverage the desired mechanism of modulation. Our analysis suggests that modulation index of electrorefractive modulation in a HEMT-like structure is comparable to silicon photonic modulators, albeit with much higher electron mobility and thereby much higher modulation rates.
△ Less
Submitted 23 December, 2019; v1 submitted 16 July, 2019;
originally announced July 2019.
-
Modeling the colors of phase noise in optomechanical oscillators
Authors:
Cijy Mathai,
Sunil A. Bhave,
Siddharth Tallur
Abstract:
Optomechanical oscillators (OMOs) combine the co-existing high quality factor mechanical and optical resonances in an integrated device to realize low phase noise RF oscillations. While several attempts have been demonstrated towards modeling the phase noise in such oscillators, the close-to-carrier phase noise models in literature do not account for $1/f^3$ (pink noise) and higher order slopes in…
▽ More
Optomechanical oscillators (OMOs) combine the co-existing high quality factor mechanical and optical resonances in an integrated device to realize low phase noise RF oscillations. While several attempts have been demonstrated towards modeling the phase noise in such oscillators, the close-to-carrier phase noise models in literature do not account for $1/f^3$ (pink noise) and higher order slopes in the phase noise spectra. Here we present a phase noise model, corroborated with experimental characterization of phase noise of two monolithic integrated silicon OMOs, accounting for contributions to the phase noise due to thermomechanical, and adsorption-desorption (AD) noise. The model shows good agreement with experimental data and provides further insights into the mechanisms underlying the noise processes contributing to different slopes in the phase noise spectra in OMOs.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
Synchronization of Chaotic Oscillators With Partial Linear Feedback Control
Authors:
Keyur Mistry,
Sudeshna Dash,
Siddharth Tallur
Abstract:
We present a methodology for synchronization of chaotic oscillators with linear feedback control. The proposed method is based on analyzing the chaotic oscillator as a multi-mode linear system and deriving sufficient conditions for asymptotic stability. The oscillators are synchronized in a master-slave configuration, wherein a subset of the state variables for implementing the feedback control, e…
▽ More
We present a methodology for synchronization of chaotic oscillators with linear feedback control. The proposed method is based on analyzing the chaotic oscillator as a multi-mode linear system and deriving sufficient conditions for asymptotic stability. The oscillators are synchronized in a master-slave configuration, wherein a subset of the state variables for implementing the feedback control, enabling applications in cryptography for message encryption using the unused chaotic state variables. Controller stability is ensured through conventional root-locus technique for designing appropriate loop gain. We validate the methodology presented here with numerical simulations and experimental results obtained using an operational amplifier (op-amp) based electronic chaotic oscillator circuit.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
Rayleigh scattering boosted multi-GHz displacement sensitivity in whispering gallery opto-mechanical resonators
Authors:
Siddharth Tallur,
Sunil A. Bhave
Abstract:
Finite photon lifetimes for light fields in an opto-mechanical cavity impose a bandwidth limit on displacement sensing at mechanical resonance frequencies beyond the loaded cavity photon decay rate. Opto-mechanical modulation efficiency can be enhanced via multi-GHz transduction techniques such as piezo-opto-mechanics at the cost of on-chip integration. In this paper, we present a novel high bandw…
▽ More
Finite photon lifetimes for light fields in an opto-mechanical cavity impose a bandwidth limit on displacement sensing at mechanical resonance frequencies beyond the loaded cavity photon decay rate. Opto-mechanical modulation efficiency can be enhanced via multi-GHz transduction techniques such as piezo-opto-mechanics at the cost of on-chip integration. In this paper, we present a novel high bandwidth displacement sense scheme employing Rayleigh scattering in photonic resonators. Using this technique in conjunction with on-chip electrostatic drive in silicon enables efficient modulation at frequencies up to 9.1GHz. Being independent of the drive mechanism, this scheme could readily be extended to piezo-opto-mechanical and all optical transduced systems.
△ Less
Submitted 5 September, 2013;
originally announced September 2013.
-
A silicon electromechanical photodetector
Authors:
Siddharth Tallur,
Sunil A. Bhave
Abstract:
Opto-mechanical systems have enabled wide-band optical frequency conversion and multi-channel all-optical radio frequency amplification. Realization of an on-chip silicon communication platform is limited by photodetectors needed to convert optical information to electrical signals for further signal processing. In this paper we present a coupled silicon micro-resonator, which converts near-IR opt…
▽ More
Opto-mechanical systems have enabled wide-band optical frequency conversion and multi-channel all-optical radio frequency amplification. Realization of an on-chip silicon communication platform is limited by photodetectors needed to convert optical information to electrical signals for further signal processing. In this paper we present a coupled silicon micro-resonator, which converts near-IR optical intensity modulation at 174.2MHz and 1.198GHz into motional electrical current. This device emulates a photodetector which detects intensity modulation of continuous wave laser light in the full-width-at-half-maximum bandwidth of the mechanical resonance. The resonant principle of operation eliminates dark current challenges associated with convetional photodetectors.
△ Less
Submitted 15 March, 2013;
originally announced March 2013.
-
Comparison of f-Q scaling in wineglass and radial modes in ring resonators
Authors:
Siddharth Tallur,
Sunil A. Bhave
Abstract:
Low phase noise MEMS oscillators necessitate resonators with high f-Q. Resonators achieving high f-Q (mechanical frequency-quality factor product) close to the thermo-elastic dam** (TED) limit have been demonstrated at expense of feed-through. Here we present a study comparing frequency scaling of quality factors of wineglass and radial modes in a ring resonator using an opto-mechanical two port…
▽ More
Low phase noise MEMS oscillators necessitate resonators with high f-Q. Resonators achieving high f-Q (mechanical frequency-quality factor product) close to the thermo-elastic dam** (TED) limit have been demonstrated at expense of feed-through. Here we present a study comparing frequency scaling of quality factors of wineglass and radial modes in a ring resonator using an opto-mechanical two port transmission measurement. Higher harmonics of the wineglass mode show an increasing trend in the f-Q product, as compared to a saturation of f-Q for radial modes. The measured f-Q of 5.11e13Hz at 9.82GHz in air at room temperature for a wineglass mode is close to the highest measured values in silicon resonators.
△ Less
Submitted 28 January, 2013;
originally announced January 2013.
-
Electro-mechanically induced GHz rate optical frequency modulation in silicon
Authors:
Siddharth Tallur,
Sunil A. Bhave
Abstract:
We present a monolithic silicon acousto-optic frequency modulator (AOFM) operating at 1.09GHz. Direct spectroscopy of the modulated laser power shows asymmetric sidebands which indicate coincident amplitude modulation and frequency modulation. Employing mechanical levers to enhance displacement of the optical resonator resulted in greater than 67X improvement in the opto-mechanical frequency modul…
▽ More
We present a monolithic silicon acousto-optic frequency modulator (AOFM) operating at 1.09GHz. Direct spectroscopy of the modulated laser power shows asymmetric sidebands which indicate coincident amplitude modulation and frequency modulation. Employing mechanical levers to enhance displacement of the optical resonator resulted in greater than 67X improvement in the opto-mechanical frequency modulation factor over earlier reported numbers for silicon nanobeams.
△ Less
Submitted 26 July, 2012;
originally announced July 2012.
-
Acousto-optic frequency modulator
Authors:
Siddharth Tallur,
Sunil A. Bhave
Abstract:
Frequency modulation of a continuous wave laser source enables generation of photons at multiple frequencies from a single pump laser. Such multiple closely spaced laser lines are important for high data rate QAM in dense-WDM networks. In this paper we present a monolithic silicon acousto-optic frequency modulator (AOFM) operating at 1.09GHz. We demonstrate frequency modulation of a 1564nm wavelen…
▽ More
Frequency modulation of a continuous wave laser source enables generation of photons at multiple frequencies from a single pump laser. Such multiple closely spaced laser lines are important for high data rate QAM in dense-WDM networks. In this paper we present a monolithic silicon acousto-optic frequency modulator (AOFM) operating at 1.09GHz. We demonstrate frequency modulation of a 1564nm wavelength pump laser, resulting in generation of sideband laser lines spaced by 0.009nm.
△ Less
Submitted 28 May, 2012;
originally announced May 2012.
-
Simultaneous radiation pressure induced heating and cooling of an opto-mechanical resonator
Authors:
Siddharth Tallur,
Sunil A. Bhave
Abstract:
Cavity opto-mechanics enabled radiation-pressure coupling between optical and mechanical modes of a micro-mechanical resonator gives rise to dynamical backaction, enabling amplification and cooling of mechanical motion. Due to a combination of large mechanical oscillations and necessary saturation of amplification, the noise floor of the opto-mechanical resonator increases, rendering it ineffectiv…
▽ More
Cavity opto-mechanics enabled radiation-pressure coupling between optical and mechanical modes of a micro-mechanical resonator gives rise to dynamical backaction, enabling amplification and cooling of mechanical motion. Due to a combination of large mechanical oscillations and necessary saturation of amplification, the noise floor of the opto-mechanical resonator increases, rendering it ineffective at transducing small signals, and thereby cooling another mechanical resonance of the system. Here we show amplification of one mechanical resonance in a micro-mechanical ring resonator while simultaneously cooling another mechanical resonance by exploiting two closely spaced optical whispering gallery mode cavity resonances.
△ Less
Submitted 14 February, 2012;
originally announced February 2012.
-
A Monolithic Radiation-Pressure Driven, Low Phase Noise Silicon Nitride Opto-Mechanical Oscillator
Authors:
Siddharth Tallur,
Suresh Sridaran,
Sunil A. Bhave
Abstract:
Cavity opto-mechanics enabled radiation pressure (RP) driven oscillators shown in the past offer an all optical Radio Frequency (RF) source without the need for external electrical feedback. However these oscillators require external tapered fiber or prism coupling and non-standard fabrication processes. In this work, we present a CMOS compatible fabrication process to design high optical quality…
▽ More
Cavity opto-mechanics enabled radiation pressure (RP) driven oscillators shown in the past offer an all optical Radio Frequency (RF) source without the need for external electrical feedback. However these oscillators require external tapered fiber or prism coupling and non-standard fabrication processes. In this work, we present a CMOS compatible fabrication process to design high optical quality factor opto-mechanical resonators in silicon nitride. The ring resonators designed in this process demonstrate low phase noise RP driven oscillations. Using integrated grating couplers and waveguide to couple light to the micro-resonator eliminates 1/f^3 and other higher order phase noise slopes at close-to-carrier frequencies present in previous demonstrations. We present an RP driven OMO operating at 41.97MHz with a signal power of -11dBm and phase noise of -85dBc/Hz at 1kHz offset with only 1/f^2 noise down to 10Hz offset from carrier.
△ Less
Submitted 14 September, 2011;
originally announced September 2011.
-
Phase Noise Modeling of Opto-Mechanical Oscillators
Authors:
Siddharth Tallur,
Suresh Sridaran,
Sunil A. Bhave,
Tal Carmon
Abstract:
We build upon and derive a precise far from carrier phase noise model for radiation pressure driven opto-mechanical oscillators and show that calculations based on our model accurately match published phase noise data for such oscillators. Furthermore, we derive insights based on the equations presented and calculate phase noise for an array of coupled disk resonators, showing that it is possible…
▽ More
We build upon and derive a precise far from carrier phase noise model for radiation pressure driven opto-mechanical oscillators and show that calculations based on our model accurately match published phase noise data for such oscillators. Furthermore, we derive insights based on the equations presented and calculate phase noise for an array of coupled disk resonators, showing that it is possible to achieve phase noise as low as -80 dBc/Hz at 1 kHz offset for a 54 MHz opto-mechanical oscillator.
△ Less
Submitted 18 June, 2010;
originally announced June 2010.
