-
Study of selected mild steels for application in vacuum systems of future gravitational wave detectors
Authors:
Carlo Scarcia,
Giuseppe Bregliozzi,
Paolo Chiggiato,
Alice Ingrid Michet,
Ana Teresa Perez Fontenla,
Martino Rimoldi,
Mauro Taborelli,
Ivo Wevers
Abstract:
Next-generation gravitational wave detectors (GWDs) like the Cosmic Explorer and Einstein Telescope require extensive vacuum tubing, necessitating cost-effective materials. This study explores the viability of mild steel as an alternative to austenitic stainless steel for UHV beampipes, focusing on outgassing rates and surface chemistry after low-temperature bakeouts. Mild steels exhibit significa…
▽ More
Next-generation gravitational wave detectors (GWDs) like the Cosmic Explorer and Einstein Telescope require extensive vacuum tubing, necessitating cost-effective materials. This study explores the viability of mild steel as an alternative to austenitic stainless steel for UHV beampipes, focusing on outgassing rates and surface chemistry after low-temperature bakeouts. Mild steels exhibit significantly lower hydrogen outgassing rates, below 10$^{-14}$ mbar l s$^{-1}$ cm$^{-2}$ after bakeouts at 80°C for 48 hours. While water vapor is the primary residual gas after such low-temperature bakeouts, repeated treatments reduce its outgassing rate and modify surface conditions so that such benefit is preserved after at least six months of exposure to laboratory air. These findings position mild steel as an economical and efficient material for future GWD beampipes.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Cleaning and Surface Properties
Authors:
Mauro Taborelli
Abstract:
Principles of the precision cleaning dedicated to ultra-high vacuum applications are reviewed together with the techniques for the evaluation of surface cleanliness. Methods to verify the effectiveness of cleaning procedures are addressed. Examples are presented to illustrate the influence of packaging and storage on the recontamination of the surface after cleaning. Finally, the effect of contami…
▽ More
Principles of the precision cleaning dedicated to ultra-high vacuum applications are reviewed together with the techniques for the evaluation of surface cleanliness. Methods to verify the effectiveness of cleaning procedures are addressed. Examples are presented to illustrate the influence of packaging and storage on the recontamination of the surface after cleaning. Finally, the effect of contamination on some relevant surface properties, such as secondary electron emission and wettability, is presented. This article is an updated and shortened version of the one previously published for the CAS school on the vacuum of accelerators 2006.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Characterization of the GEM foil materials
Authors:
L. Benussi,
S. Bianco,
G. Saviano,
S. Muhammad,
D. Piccolo,
G. Raffone,
M. Caponero,
L. Passamonti,
D. Pierluigi,
A. Russo,
F. Primavera,
S. Cerbelli,
A. Lalli,
M. Valente,
M. Ferrini,
B. Teissandier,
M. Taborelli,
M. Parvis,
S. Grassini,
J. Tirilló,
F. Sarasini,
A. V. Franchi
Abstract:
Systematic studies on the GEM foil material are performed to measure the moisture diffusion rate and saturation level. These studies are important because the presence of this compound inside the detector's foil can possibly change its mechanical and electrical properties and, in such a way, the detector performance can be affected. To understand this phenomenon, a model is developed with COMSOL M…
▽ More
Systematic studies on the GEM foil material are performed to measure the moisture diffusion rate and saturation level. These studies are important because the presence of this compound inside the detector's foil can possibly change its mechanical and electrical properties and, in such a way, the detector performance can be affected. To understand this phenomenon, a model is developed with COMSOL Multhiphysics v. 4.3, which described the adsorption and diffusion within the geometry of GEM foil, the concentration profiles and the time required to saturate the foil. The COMSOL model is verified by experimental observations on a GEM foil sample. This note will describe the model and its experimental verification results.
△ Less
Submitted 29 December, 2015;
originally announced December 2015.
-
Progress with the Upgrade of the SPS for the HL-LHC Era
Authors:
B. Goddard,
T. Argyropoulos,
H. Bartosik,
W. Bartmann,
T. Bohl,
F. Caspers,
K. Cornelis,
H. Damerau,
L. Drøsdal,
L. Ducimetière,
R. Garoby,
M. Gourber-Pace,
W. Höfle,
G. Iadarola,
L. Jensen,
V. Kain,
R. Losito,
M. Meddahi,
A. Mereghetti,
V. Mertens,
Ö. Mete,
E. Montesinos,
J. E. Müller,
Y. Papaphilippou,
G. Rumolo
, et al. (6 additional authors not shown)
Abstract:
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in ad…
▽ More
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in addition to the machine studies and simulations performed in 2012. The expected machine performance reach is estimated on the basis of the present knowledge, and the remaining decisions that still need to be made concerning upgrade options are detailed.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
Novel types of anti-ecloud surfaces
Authors:
I. Montero,
L. Aguilera,
M. E. Dávila,
V. Nistor,
L. Galán,
L. A. González,
D. Raboso,
P. Costa Pinto,
M. Taborelli,
F. Caspers,
U. Ulrich,
D. Wolk
Abstract:
In high power RF devices for space, secondary electron emission appears as the main parameter governing the multipactor effect and as well as the e-cloud in large accelerators. Critical experimental activities included development of coatings with low secondary electron emission yield (SEY) for steel (large accelerators) and aluminium (space applications). Coatings with surface roughness of high a…
▽ More
In high power RF devices for space, secondary electron emission appears as the main parameter governing the multipactor effect and as well as the e-cloud in large accelerators. Critical experimental activities included development of coatings with low secondary electron emission yield (SEY) for steel (large accelerators) and aluminium (space applications). Coatings with surface roughness of high aspect ratio producing the so-call secondary emission suppression effect appear as the selected strategy. In this work a detailed study of the SEY of these technological coatings and also the experimental deposition methods (PVD and electrochemical) are presented. The coating-design approach selected for new low SEY coatings include rough metals (Ag, Au, Al), rough alloys (NEG), particulated and magnetized surfaces, and also graphene like coatings. It was found that surface roughness also mitigate the SEY deterioration due to aging processes.
△ Less
Submitted 6 August, 2013;
originally announced August 2013.
-
Carbon coating of the SPS dipole chambers
Authors:
P. Costa Pinto,
S. Calatroni,
P. Chiggiato,
P. Edwards,
M. Mensi,
H. Neupert,
M. Taborelli,
C. Yin-Vallgren
Abstract:
The Electron Multipacting (EM) phenomenon is a limiting factor for the achievement of high luminosity in accelerators for positively charged particles and for the performance of RF devices. At CERN, the Super Proton Synchrotron (SPS) must be upgraded in order to feed the Large Hadron Collider (LHC) with 25 ns bunch spaced beams. At such small bunch spacing, EM may limit the performance of the SPS…
▽ More
The Electron Multipacting (EM) phenomenon is a limiting factor for the achievement of high luminosity in accelerators for positively charged particles and for the performance of RF devices. At CERN, the Super Proton Synchrotron (SPS) must be upgraded in order to feed the Large Hadron Collider (LHC) with 25 ns bunch spaced beams. At such small bunch spacing, EM may limit the performance of the SPS and consequently that of the LHC. To mitigate this phenomenon CERN is develo** a carbon thin film coating with low Secondary Electron Yield (SEY) to coat the internal walls of the SPS dipoles beam pipes. This paper presents the progresses in the coating technology, the performance of the carbon coatings and the strategy for a large scale production.
△ Less
Submitted 6 August, 2013;
originally announced August 2013.
-
Recent RHIC in-situ coating technology developments
Authors:
A. Hershcovitch,
M. Blaskiewicz,
J. M. Brennan,
A. Chawla,
W. Fischer,
C-J Liaw,
W. Meng,
R. Todd,
A. Custer,
M. Erickson,
N. Jamshidi,
P. Kobrin,
R. La**,
H. J. Poole,
J. M. Jimenez,
H. Neupert,
M. Taborelli,
C. Yin-Vallgren,
N. Sochugov
Abstract:
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started develo** a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) c…
▽ More
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started develo** a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) coating. The Cu coating reduces wall resistivity, while a-C has low SEY that suppresses electron cloud formation. Recent RF resistivity computations indicate that 10 μm of Cu coating thickness is needed. But, Cu coatings thicker than 2 μm can have grain structures that might have lower SEY like gold black. A 15-cm Cu cathode magnetron was designed and fabricated, after which, 30 cm long samples of RHIC cold bore tubes were coated with various OFHC copper thicknesses; room temperature RF resistivity measured. Rectangular stainless steel and SS discs were Cu coated. SEY of rectangular samples were measured at room; and, SEY of a disc sample was measured at cryogenic temperatures.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
