Showing 1–50 of 78 results for author: Tünnermann, A

Atomically Thin Metal-Dielectric Heterostructures by Atomic Layer Deposition

Authors: Pallabi Paul, Paul Schmitt, Vilborg Vala Sigurjonsdottir, Kevin Hanemann, Nadja Felde, Sven Schroeder, Felix Otto, Marco Gruenewald, Torsten Fritz, Vladimir Roddatis, Andreas Tuennermann, Adriana Szeghalmi

Abstract: Heterostructures increasingly attracted attention over the past several years to enable various optoelectronic and photonic applications. In this work, atomically thin interfaces of Ir/Al2O3 heterostructures compatible with micro-optoelectronic technologies are reported. Their structural and optical properties were determined by spectroscopic and microscopic techniques (XRR, XPS, HRTEM, spectrosco… ▽ More Heterostructures increasingly attracted attention over the past several years to enable various optoelectronic and photonic applications. In this work, atomically thin interfaces of Ir/Al2O3 heterostructures compatible with micro-optoelectronic technologies are reported. Their structural and optical properties were determined by spectroscopic and microscopic techniques (XRR, XPS, HRTEM, spectroscopic ellipsometry, and UV/VIS/NIR spectrophotometry). The XRR and HRTEM analyses reveal a layer-by-layer growth mechanism of Ir in atomic scale heterostructures, which is different from the typical island-type growth of metals on dielectrics. Alongside, XPS investigations imply the formation of Ir-O-Al bonding at the interfaces for lower Ir concentrations, in contrast to the nanoparticle core-shell structure formation. Precisely tuning the ratio of the constituents ensures the control of the dispersion profile along with a transition from effective dielectric to metallic heterostructures. The Ir coating thickness was varied ranging from a few Å to films of about 7 nm in the heterostructures. The transition has been observed in the structures containing individual Ir coating thicknesses of about 2-4 nm. Following this, show epsilon-near-zero metamaterials with tunable dielectric constants by precisely varying the composition of such heterostructures. Overall, a comprehensive study on structural and optical properties of the metal-dielectric interface of Ir/Al2O3 heterostructures was addressed indicating an extension of the material portfolio available for optical system design. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Linear and Nonlinear Optical Properties of Iridium Nanoparticles by Atomic Layer deposition

Authors: Paul Schmitt, Pallabi Paul, Weiwei Li, Zilong Wang, Christin David, Navid Daryakar, Kevin Hanemann, Nadja Felde, Anne-Sophie Munser, Matthias F. Kling, Sven Schroeder, Andreas Tuennermann, Adriana Szeghalmi

Abstract: Nonlinear optical phenomena enable novel photonic and optoelectronic applications. Especially metallic nanoparticles and thin films with nonlinear optical properties offer the potential for micro-optical system integration. For this purpose, new nonlinear materials need to be continuously identified, investigated, and utilized for nonlinear optical applications. While noble metal nanoparticles, na… ▽ More Nonlinear optical phenomena enable novel photonic and optoelectronic applications. Especially metallic nanoparticles and thin films with nonlinear optical properties offer the potential for micro-optical system integration. For this purpose, new nonlinear materials need to be continuously identified, investigated, and utilized for nonlinear optical applications. While noble metal nanoparticles, nanostructures, and thin films of Ag and Au were widely studied, iridium (Ir) nanoparticles and ultra-thin films have not been investigated yet. Here, we present a combined theoretical and experimental study on the linear and nonlinear optical properties of Ir nanoparticles deposited by atomic layer deposition (ALD). Linear optical constants, i.e., the effective refractive index n and extinction coefficient k, were evaluated at different growth stages of nanoparticle formation. Both linear and nonlinear optical properties of these Ir ALD coatings were calculated theoretically using Bruggeman and Maxwell-Garnett theories. The third-order susceptibility of Ir nanoparticle samples was experimentally investigated using the Z-scan technique. Overall, our studies demonstrate the potential of ultrathin Ir NPs as an alternative nonlinear optical material at an atomic scale. △ Less

Submitted 11 October, 2022; originally announced October 2022.

Towards metropolitan free-space quantum networks

Authors: Andrej Kržič, Sakshi Sharma, Christopher Spiess, Uday Chandrashekara, Sebastian Töpfer, Gregor Sauer, Luis Javier González-Martín del Campo, Teresa Kopf, Stefan Petscharnig, Thomas Grafenauer, Roland Lieger, Bernhard Ömer, Christoph Pacher, René Berlich, Thomas Peschel, Christoph Damm, Stefan Risse, Matthias Goy, Daniel Rieländer, Andreas Tünnermann, Fabian Steinlechner

Abstract: Quantum communication has seen rapid progress towards practical large-scale networks, with quantum key distribution (QKD) spearheading this development. While fibre based systems have been shown to be well suited for metropolitan scales, suitable fibre infrastructure may not always be in place. Here, we make the case for an entanglement-based free-space quantum network as a practical and efficient… ▽ More Quantum communication has seen rapid progress towards practical large-scale networks, with quantum key distribution (QKD) spearheading this development. While fibre based systems have been shown to be well suited for metropolitan scales, suitable fibre infrastructure may not always be in place. Here, we make the case for an entanglement-based free-space quantum network as a practical and efficient alternative for metropolitan applications. We developed a deployable free space QKD system and demonstrated its use in realistic scenarios. For a representative 1.7-km free-space link, we showcase its ad hoc deployability and achieve secure key rates of up to 5.7 kbps, with 2.5 kbps in direct noon sunlight. By extrapolating experimental data, we show that kbps key rates are achievable even for 10-km distances and multi-user scenarios. We anticipate that our work will establish free space networks as a viable solution for metropolitan applications and an indispensable complementary building block in the future global quantum internet. △ Less

Submitted 30 May, 2023; v1 submitted 25 May, 2022; originally announced May 2022.

Comments: Expanded analysis, improved plots, added information that further supports our claims; results unchanged

500 W rod-type 4x4 multi-core ultrafast fiber laser

Authors: A. Klenke, A. Steinkopff, C. Aleshire, C. Jauregui, S. Kuhn, J. Nold, C. Hupel, S. Hein, S. Schulze, N. Haarlammert, T. Schreiber, A. Tünnermann, J. Limpert

Abstract: We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz repetition rate with an excellent beam quality. Additionally, <500 fs pulses with up to 600 uJ of pulse energy were also realized with this setup. This architecture is… ▽ More We present a coherently-combined femtosecond fiber CPA system based on a rod-type, Ytterbium-doped, multicore fiber with 4x4 cores. A high average power of up to 500 W (after combination and compression) could be achieved at 10 MHz repetition rate with an excellent beam quality. Additionally, <500 fs pulses with up to 600 uJ of pulse energy were also realized with this setup. This architecture is intrinsically power scalable by increasing the number of cores in the fiber. △ Less

Submitted 5 May, 2022; originally announced May 2022.

Journal ref: Opt. Lett. 47, 345 (2022)

Experimental Investigations on the TMI Thresholds of Low-NA Yb-doped single mode fibers

Authors: Franz Beier, Friedrich Moeller, Bettina Sattler, Johannes Nold, Andreas Liem, Christian Hupel, Stefan Kuhn, Sigrun Hein, Nicoletta Haarlammert, Thomas Schreiber, Ramona Eberhardt, Andreas Tuennermann

Abstract: In this contribution we investigate the transversal mode instability behavior of an ytterbium doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the influence of the bend diameter and the pump wavelength within the scope of the absorption length and the length of the fiber. Furthermore with a newly developed fib… ▽ More In this contribution we investigate the transversal mode instability behavior of an ytterbium doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the influence of the bend diameter and the pump wavelength within the scope of the absorption length and the length of the fiber. Furthermore with a newly developed fiber we report on 4.4 kW of single-mode output power at 40 cm bend diameter. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Journal ref: Opt. Lett. 43, 1291-1294 (2018)

Monolithic Thulium Fiber Laser with 567 W output power at 1970 nm

Authors: Till Walbaum, Matthias Heinzig, Thomas Schreiber, Ramona Eberhardt, Andreas Tünnermann

Abstract: We report on a monolithic thulium fiber laser with 567 W output power at 1970 nm, which is the highest power reported so far directly from a thulium oscillator. This is achieved by optimization of the splice parameters for the active fiber (minimizing signal light in the fiber cladding) and direct water cooling. Dual transverse mode operation is visible from the optical spectrum and can also be de… ▽ More We report on a monolithic thulium fiber laser with 567 W output power at 1970 nm, which is the highest power reported so far directly from a thulium oscillator. This is achieved by optimization of the splice parameters for the active fiber (minimizing signal light in the fiber cladding) and direct water cooling. Dual transverse mode operation is visible from the optical spectrum and can also be deduced from the measured beam quality of M^2 = 2.6. \c{opyright} 2016 Optical Society of America under Open Access Publishing Agreement. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Journal ref: Opt. Lett. 41, 2632-2635 (2016)

Measuring Thermal Load in Fiber Amplifiers in the Presence of Transversal Mode Instabilities

Authors: Franz Beier, Marco Plötner, Bettina Sattler, Fabian Stutzki, Till Walbaum, Andreas Liem, Nicoletta Haarlammert, Thomas Schreiber, Ramona Eberhardt, Andreas Tünnermann

Abstract: We report on detailed in-situ distributed temperature measurements inside a high power fiber amplifier. The deducted thermal load and the TMI-threshold of a commercial LMA fiber with 25 micron core and 400 micron cladding was measured at various seed wavelengths. By matching these results with detailed simulations we show that photodarkening has a negligible impact on the thermal load and, therefo… ▽ More We report on detailed in-situ distributed temperature measurements inside a high power fiber amplifier. The deducted thermal load and the TMI-threshold of a commercial LMA fiber with 25 micron core and 400 micron cladding was measured at various seed wavelengths. By matching these results with detailed simulations we show that photodarkening has a negligible impact on the thermal load and, therefore, on the TMI threshold in this fiber. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Journal ref: Opt. Lett. 42, 4311-4314 (2017)

Simplified Design of Optical Elements for Filled-Aperture Coherent Beam Combination

Authors: Christopher Aleshire, Albrecht Steinkopff, Cesar Jauregui, Arno Klenke, Andreas Tünnermann, Jens Limpert

Abstract: A simplification strategy for Segmented Mirror Splitters (SMS) used as beam combiners is presented. These devices are useful for compact beam division and combination of linear and 2-D arrays. However, the standard design requires unique thin-film coating sections for each input beam and thus potential for scaling to high beam-counts is limited due to manufacturing complexity. Taking advantage of… ▽ More A simplification strategy for Segmented Mirror Splitters (SMS) used as beam combiners is presented. These devices are useful for compact beam division and combination of linear and 2-D arrays. However, the standard design requires unique thin-film coating sections for each input beam and thus potential for scaling to high beam-counts is limited due to manufacturing complexity. Taking advantage of the relative insensitivity of the beam combination process to amplitude variations, numerical techniques are used to optimize highly-simplified designs with only one, two or three unique coatings. It is demonstrated that with correctly chosen coating reflectivities, the simplified optics are capable of high combination efficiency for several tens of beams. The performance of these optics as beamsplitters in multicore fiber amplifier systems is analyzed, and inhomogeneous power distribution of the simplified designs is noted as a potential source of combining loss in such systems. These simplified designs may facilitate further scaling of filled-aperture coherently combined systems. △ Less

Submitted 26 January, 2021; originally announced January 2021.

Comments: 11 pages, 7 figures

Journal ref: Optics Express 28, 21035-21045 (2020)

23 mJ high-power fiber CPA system using electro-optically controlled divided-pulse amplification

Authors: Henning Stark, Joachim Buldt, Michael Müller, Arno Klenke, Andreas Tünnermann, Jens Limpert

Abstract: The pulse-energy scaling technique electro-optically controlled divided-pulse amplification is implemented in a high-power ultrafast fiber laser system based on coherent beam combination. A fiber-integrated front end and a multi-pass cell based back end allow for a small footprint and a modular implementation. Bursts of 8 pulses are amplified parallel in up to 12 ytterbium-doped large-pitch fiber… ▽ More The pulse-energy scaling technique electro-optically controlled divided-pulse amplification is implemented in a high-power ultrafast fiber laser system based on coherent beam combination. A fiber-integrated front end and a multi-pass cell based back end allow for a small footprint and a modular implementation. Bursts of 8 pulses are amplified parallel in up to 12 ytterbium-doped large-pitch fiber amplifiers. Subsequent spatio-temporal coherent combination of the 96 total amplified pulse replicas to a single pulse results in a pulse energy of 23 mJ at an average power of 674 W, compressible to a pulse duration of 235 fs. To the best of our knowledge, this is the highest pulse energy ever accomplished with a fiber CPA system. △ Less

Submitted 24 January, 2021; originally announced January 2021.

Journal ref: Optics Letters 44 (2019), 5529

Electro-optically controlled divided-pulse amplification

Authors: Henning Stark, Michael Müller, Marco Kienel, Arno Klenke, Jens Limpert, Andreas Tünnermann

Abstract: A novel technique for divided-pulse amplification is presented in a proof-of-principle experiment. A pulse burst, cut out of the pulse train of a mode-locked oscillator, is amplified and temporally combined into a single pulse. High combination efficiency and excellent pulse contrast are demonstrated. The system is mostly fiber-coupled, enabling a high interferometric stability. This approach prov… ▽ More A novel technique for divided-pulse amplification is presented in a proof-of-principle experiment. A pulse burst, cut out of the pulse train of a mode-locked oscillator, is amplified and temporally combined into a single pulse. High combination efficiency and excellent pulse contrast are demonstrated. The system is mostly fiber-coupled, enabling a high interferometric stability. This approach provides access to the amplitude and phase of the individual pulses in the burst to be amplified, potentially allowing the compensation of gain saturation and nonlinear phase mismatches within the burst. Therefore, this technique enables the scaling of the peak power and pulse energy of pulsed laser systems beyond currently prevailing limitations. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Journal ref: Optics Express 25 (2017), 13494-13503

Temporal contrast enhancement of energeticlaser pulses by filtered self-phase-modulation broadened spectra

Authors: Joachim Buldt, Michael Mueller, Robert Klas, Tino Eidam, Jens Limpert, Andreas Tuennermann

Abstract: We present a novel approach for temporal contrast enhancement of energetic laserpulses by filtered SPM broadened spectra. A measured temporal contrast enhancement by at least 7 orders of magnitude in a simple setup has been achieved. This technique is applicable to a wide range of laser parameters and poses a highly efficient alternative to existing contrast-enhancement methods. We present a novel approach for temporal contrast enhancement of energetic laserpulses by filtered SPM broadened spectra. A measured temporal contrast enhancement by at least 7 orders of magnitude in a simple setup has been achieved. This technique is applicable to a wide range of laser parameters and poses a highly efficient alternative to existing contrast-enhancement methods. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Journal ref: Optics Letters Vol. 42, Issue 19, pp. 3761-3764 (2017)

10.4 kW coherently combined ultrafast fiber laser

Authors: Michael Müller, Christopher Aleshire, Arno Klenke, Elissa Haddad, François Légaré, Andreas Tünnermann, Jens Limpert

Abstract: An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam quality (M2<=1.2), and a low relative intensity noise of 0.56% in the frequency range of from 1 Hz to 1 MHz. Automated spatiotemporal alignment allows for hand… ▽ More An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam quality (M2<=1.2), and a low relative intensity noise of 0.56% in the frequency range of from 1 Hz to 1 MHz. Automated spatiotemporal alignment allows for hands-off operation. △ Less

Submitted 21 January, 2021; originally announced January 2021.

High-average-power femtosecond laser at 258 nm

Authors: Michael Müller, Arno Klenke, Thomas Gottschall, Robert Klas, Carolin Rothhardt, Stefan Demmler, Jan Rothhardt, Jens Limpert, Andreas Tünnermann

Abstract: We present an ultrafast fiber laser system delivering 4.6 W average power at 258 nm based on two-stage fourth-harmonic generation in beta barium borate (BBO). The beam quality is close to diffraction limited with an M2- value of 1.3 x 1.6. The pulse duration is 150 fs, which potentially is compressible down to 40 fs. A plain BBO and a Sapphire-BBO compound are compared with respect to the achievab… ▽ More We present an ultrafast fiber laser system delivering 4.6 W average power at 258 nm based on two-stage fourth-harmonic generation in beta barium borate (BBO). The beam quality is close to diffraction limited with an M2- value of 1.3 x 1.6. The pulse duration is 150 fs, which potentially is compressible down to 40 fs. A plain BBO and a Sapphire-BBO compound are compared with respect to the achievable beam quality in the conversion process. This laser is applicable in scientific and industrial fields. Further scaling to higher average power is discussed △ Less

Submitted 21 January, 2021; originally announced January 2021.

3.5 kW coherently combined ultrafast fiber laser

Authors: Michael Müller, Arno Klenke, Albrecht Steinkopff, Henning Stark, Andreas Tünnermann, Jens Limpert

Abstract: An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam quality is excellent (M2<1.24x1.10) and the relative intensity noise is as low as 1% in the frequency span from 1 Hz to 1 MHz. The system is turn-key operable as it f… ▽ More An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam quality is excellent (M2<1.24x1.10) and the relative intensity noise is as low as 1% in the frequency span from 1 Hz to 1 MHz. The system is turn-key operable as it features an automated spatial and temporal alignment of the interferometric amplification channels. △ Less

Submitted 21 January, 2021; originally announced January 2021.

1kW 1mJ 8-channel ultrafast fiber laser

Authors: Michael Müller, Marco Kienel, Arno Klenke, Thomas Gottschall, Evgeny Shestaev, Marco Plötner, Jens Limpert, Andreas Tünnermann

Abstract: An ultrafast fiber chirped-pulse amplifier comprising 8 coherently combined amplifier channels is presented. The laser delivers 1 kW average power at 1 mJ pulse energy and 260 fs pulse duration. Excellent beam quality and low noise performance are confirmed. The laser has proven suitable for demanding scientific applications. Further power scaling is possible right away using even more amplifier c… ▽ More An ultrafast fiber chirped-pulse amplifier comprising 8 coherently combined amplifier channels is presented. The laser delivers 1 kW average power at 1 mJ pulse energy and 260 fs pulse duration. Excellent beam quality and low noise performance are confirmed. The laser has proven suitable for demanding scientific applications. Further power scaling is possible right away using even more amplifier channels △ Less

Submitted 21 January, 2021; originally announced January 2021.

Sequential phase locking scheme for a filled aperture intensity coherent combination of beam arrays

Authors: Arno Klenke, Michael Müller, Henning Stark, Andreas Tünnermann, Jens Limpert

Abstract: We present a novel phase locking scheme for the coherent combination of beam arrays in the filled aperture configuration. Employing a phase dithering mechanism for the different beams similar to LOCSET, dithering frequencies for sequential combination steps are reused. By applying an additional phase alternating scheme, this allows to use standard synchronized multichannel lock-in electronics for… ▽ More We present a novel phase locking scheme for the coherent combination of beam arrays in the filled aperture configuration. Employing a phase dithering mechanism for the different beams similar to LOCSET, dithering frequencies for sequential combination steps are reused. By applying an additional phase alternating scheme, this allows to use standard synchronized multichannel lock-in electronics for phase locking a large number of channels even when the frequency bandwidth of the employed phase actuators is limited. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Energetic sub-2-cycle laser with 220 W average power

Authors: Steffen Hädrich, Marco Kienel, Michael Müller, Arno Klenke, Jan Rothhardt, Robert Klas, Thomas Gottschall, Tino Eidam, András Drozdy, Péter Jójárt, Zoltán Várallyay, Eric Cormier, Károly Osvay, Andreas Tünnermann, Jens Limpert

Abstract: Few-cycle lasers are essential for many research areas such as attosecond physics that promises to address fundamental questions in science and technology. Therefore, further advancements are connected to significant progress in the underlying laser technology. Here, two-stage nonlinear compression of a 660 W femtosecond fiber laser system is utilized to achieve unprecedented average power levels… ▽ More Few-cycle lasers are essential for many research areas such as attosecond physics that promises to address fundamental questions in science and technology. Therefore, further advancements are connected to significant progress in the underlying laser technology. Here, two-stage nonlinear compression of a 660 W femtosecond fiber laser system is utilized to achieve unprecedented average power levels of energetic ultrashort or even few-cycle laser pulses. In a first compression step 408 W, 320 uJ, 30fs pulses are achieved, which can be further compressed to 216 W, 170 uJ, 6.3 fs pulses in a second compression stage. This is the highest average power few-cycle laser system presented so far. It is expected to significantly advance the fields of high harmonic generation and attosecond science. △ Less

Submitted 20 January, 2021; originally announced January 2021.

Coherently combined 16 channel multicore fiber laser system

Authors: A. Klenke, M. Müller, H. Stark, F. Stutzki, C. Hupel, T. Schreiber, A. Tünnermann, J. Limpert

Abstract: We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses are achieved with combination efficiencies around 80%. We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses are achieved with combination efficiencies around 80%. △ Less

Submitted 20 January, 2021; originally announced January 2021.

Coherent Beam Combination of Ultrafast Fiber Lasers

Authors: Arno Klenke, Michael Müller, Henning Stark, Marco Kienel, Cesar Jauregui, Andreas Tünnermann, Jens Limpert

Abstract: The performance of fiber laser systems has drastically increased over recent decades, which has opened up new industrial and scientific applications for this technology. However, currently a number of physical effects prevents further power scaling. Coherent combination of beams from multiple emitters has been established as a power scaling technique beyond these limitations. It is possible to inc… ▽ More The performance of fiber laser systems has drastically increased over recent decades, which has opened up new industrial and scientific applications for this technology. However, currently a number of physical effects prevents further power scaling. Coherent combination of beams from multiple emitters has been established as a power scaling technique beyond these limitations. It is possible to increase the average power and, for pulsed laser systems, also parameters such as the pulse energy and the peak power. To realize such laser systems, various aspects have to be taken into account which include beam combination elements, stabilization systems and the output parameters of the individual amplifiers. After an introduction to the topic, various ways of implementing coherent beam combination for ultrashort pulses are explored. Besides the spatial combination of beams, the combination of pulses in time will also be discussed. Recent experimental results will be presented, including multi-dimensional (i.e. spatial and temporal) combination. Finally, an outlook on possible further developments is given, focused on scaling the number of combinable beams and pulses. △ Less

Submitted 14 January, 2021; originally announced January 2021.

Laser-induced anti-Stokes fluorescence cooling of ytterbium-doped silica glass by more than 6 Kelvin

Authors: Mostafa Peysokhan, Saeid Rostami, Esmaeil Mobini, Alexander R. Albrecht, Stefan Kuhn, Sigrun Hein, Christian Hupel, Johannes Nold, Nicoletta Haarlammert, Thomas Schreiber, Ramona Eberhardt, Angel S. Flores, Andreas Tünnermann, Mansoor Sheik-Bahae, Arash Mafi

Abstract: Laser cooling of a solid is achieved when a coherent laser illuminates the material, and the heat is extracted by resulting anti-Stokes fluorescence. Over the past year, net solid-state laser cooling was successfully demonstrated for the first time in Yb-doped silica glass in both bulk samples and fibers. Here, we improve the previously published results by one order of magnitude and report more t… ▽ More Laser cooling of a solid is achieved when a coherent laser illuminates the material, and the heat is extracted by resulting anti-Stokes fluorescence. Over the past year, net solid-state laser cooling was successfully demonstrated for the first time in Yb-doped silica glass in both bulk samples and fibers. Here, we improve the previously published results by one order of magnitude and report more than 6K of cooling below the ambient temperature. This result is the lowest temperature achieved in solid-state laser cooling of silica glass to date to the best of our knowledge. We present details on the experiment performed using a 20W laser operating at 1035nm wavelength and temperature measurements using both a thermal camera and the differential luminescence thermometry technique. △ Less

Submitted 23 November, 2020; originally announced November 2020.

Fiber lasers: a power-scalable coherent light source for applications in space

Authors: Oliver de Vries, Marco Plötner, Thomas Schreiber, Ramona Eberhardt, Andreas Tünnermann

Abstract: Fiber lasers entered numerous applications due to their high efficiency and superior stability. Particularly in space, those lasers have to fulfill additional requirements set by the harsh environment, typically characterized by large temperature gradients, vibration and shock as well as different kinds of radiation. In this contribution, we will report on the development and realization of a fibe… ▽ More Fiber lasers entered numerous applications due to their high efficiency and superior stability. Particularly in space, those lasers have to fulfill additional requirements set by the harsh environment, typically characterized by large temperature gradients, vibration and shock as well as different kinds of radiation. In this contribution, we will report on the development and realization of a fiber laser intended to operate as part of a Rendezvous and Docking 3D-Lidar system considering the aforementioned specialties. Power scaling of pulsed as well as continuous-wave fiber lasers is yet another way to exploit new application fields in space. △ Less

Submitted 25 October, 2019; originally announced October 2019.

Comments: 4 pages, 8 figures

Laser Cooling of Silica Glass

Authors: Esmaeil Mobini, Saeid Rostami, Mostafa Peysokhan, Alexander Albrecht, Stefan Kuhn, Sigrun Hein, Christian Hupel, Johannes Nold, Nicoletta Haarlammert, Thomas Schreiber, Ramona Eberhardt, Andreas Tunnermann, Mansoor Sheik-Bahae, Arash Mafi

Abstract: Laser cooling of a solid is achieved when a coherent laser illuminates the material in the red tail of its absorption spectrum, and the heat is carried out by anti-Stokes fluorescence of the blue-shifted photons. Solid-state laser cooling has been successfully demonstrated in several materials, including rare-earth-doped crystals and glasses. Silica glass, being the most widely used optical materi… ▽ More Laser cooling of a solid is achieved when a coherent laser illuminates the material in the red tail of its absorption spectrum, and the heat is carried out by anti-Stokes fluorescence of the blue-shifted photons. Solid-state laser cooling has been successfully demonstrated in several materials, including rare-earth-doped crystals and glasses. Silica glass, being the most widely used optical material, has so far evaded all laser cooling attempts. In addition to its fundamental importance, many potential applications can be conceived for anti-Stokes fluorescence cooling of silica. These potential applications range from the substrate cooling of optical circuits for quantum information processing and cryogenic cooling of mirrors in high-sensitivity interferometers for gravitational wave detection to the heating reduction in high-power fiber lasers and amplifiers. Here we report the net cooling of high-purity Yb-doped silica glass samples that are primarily developed for high-power fiber laser applications, where special care has been taken in the fabrication process to reduce their impurities and lower their parasitic background loss. The non-radiative decay rate of the excited state in Yb ions is very small in these glasses due to the low level of impurities, resulting in near-unity quantum efficiency. We report the measurement of the cooling efficiency as a function of the laser wavelength, from which the quantum efficiency of the silica glass is calculated. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Journal ref: Commun Phys 3, 134 (2020)

Quantum-limited measurements of intensity noise levels in Yb-doped fiber amplifiers

Authors: Alexandra Popp, Victor Distler, Kevin Jaksch, Florian Sedlmeir, Christian R. Müller, Nicoletta Haarlammert, Thomas Schreiber, Christoph Marquardt, Andreas Tünnermann, Gerd Leuchs

Abstract: We investigate the frequency-resolved intensity noise spectrum of an Yb-doped fiber amplifier down to the fundamental limit of quantum noise. We focus on the kHz and low MHz frequency regime with special interest in the region between 1 and 10 kHz. Intensity noise levels up to >60 dB above the shot noise limit are found, revealing great optimization potential. Additionally, two seed lasers with di… ▽ More We investigate the frequency-resolved intensity noise spectrum of an Yb-doped fiber amplifier down to the fundamental limit of quantum noise. We focus on the kHz and low MHz frequency regime with special interest in the region between 1 and 10 kHz. Intensity noise levels up to >60 dB above the shot noise limit are found, revealing great optimization potential. Additionally, two seed lasers with different noise characteristics were amplified, showing that the seed source has a significant impact and should be considered in the design of high power fiber amplifiers. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Journal ref: Appl. Phys. B 126, 130 (2020)

Precision manufacturing of a lightweight mirror body made by selective laser melting

Authors: Enrico Hilpert, Johannes Hartung, Stefan Risse, Ramona Eberhardt, Andreas Tünnermann

Abstract: This article presents a new and individual way to generate opto-mechanical components by Additive Manufacturing, embedded in an established process chain for the fabrication of metal optics. The freedom of design offered by additive techniques gives the opportunity to produce more lightweight parts with improved mechanical stability. The latter is demonstrated by simulations of several models of m… ▽ More This article presents a new and individual way to generate opto-mechanical components by Additive Manufacturing, embedded in an established process chain for the fabrication of metal optics. The freedom of design offered by additive techniques gives the opportunity to produce more lightweight parts with improved mechanical stability. The latter is demonstrated by simulations of several models of metal mirrors with a constant outer shape but varying mass reduction factors. The optimized lightweight mirror exhibits $63.5 \%$ of mass reduction and a higher stiffness compared to conventional designs, but it is not manufacturable by cutting techniques. Utilizing Selective Laser Melting instead, a demonstrator of the mentioned topological non-trivial design is manufactured out of AlSi12 alloy powder. It is further shown that -- like in case of a traditional manufactured mirror substrate -- optical quality can be achieved by diamond turning, electroless nickel plating, and polishing techniques, which finally results in $< 150$~nm peak-to-valley shape deviation and a roughness of $< 1$~nm rms in a measurement area of $140 \times 110$ $μ$m${}^2$. Negative implications from the additive manufacturing are shown to be negligible. Further it is shown that surface form is maintained over a two year storage period under ambient conditions. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 13 pages, 19 figures, online version (corrected proof)

Journal ref: Precis. Eng. 53 (2018) 310-317

Velocity- and pointing-error measurements of a 300 000 r/min self-bearing permanent-magnet motor for optical applications

Authors: Sven Breitkopf, Nikolai Lilienfein, Timon Achtnich, Christof Zwyssig, Andreas Tünnermann, Ioachim Pupeza, Jens Limpert

Abstract: Compact, ultra-high-speed self-bearing permanent-magnet motors enable a wide scope of applications including an increasing number of optical ones. For implementation in an optical setup the rotors have to satisfy high demands regarding their velocity and pointing errors. Only a restricted number of measurements of these parameters exist and only at relatively low velocities. This manuscript presen… ▽ More Compact, ultra-high-speed self-bearing permanent-magnet motors enable a wide scope of applications including an increasing number of optical ones. For implementation in an optical setup the rotors have to satisfy high demands regarding their velocity and pointing errors. Only a restricted number of measurements of these parameters exist and only at relatively low velocities. This manuscript presents the measurement of the velocity and pointing errors at rotation frequencies up to 5 kHz. The acquired data allows to identify the rotor drive as the main source of velocity variations with fast fluctuations of up to 3.4 ns (RMS) and slow drifts of 23 ns (RMS) over ~120 revolutions at 5 kHz in vacuum. At the same rotation frequency the pointing fluctuated by 12 $μ$rad (RMS) and 33 $μ$rad (peak-to-peak) over ~10000 roundtrips. To our best knowledge this states the first measurement of velocity and pointing errors at multi-kHz rotation frequencies and will allow potential adopters to evaluate the feasibility of such rotor drives for their application. △ Less

Submitted 9 November, 2017; originally announced November 2017.

Materials Pushing the Application Limits of Wire Grid Polarizers further into the Deep Ultraviolet Spectral Range

Authors: Thomas Siefke, Stefanie Kroker, Kristin Pfeiffer, Oliver Puffky, Kay Dietrich, Daniel Franta, Ivan Ohlídal, Adriana Szeghalmi, Ernst-Bernhard Kley, Andreas Tünnermann

Abstract: Wire grid polarizers (WGPs), periodic nano-optical meta-surfaces, are convenient polarizing elements for many optical applications. However, they are still inadequate in the deep ultraviolet spectral range. We show that to achieve high performance ultraviolet WGPs a material with large absolute value of the complex permittivity and extinction coefficient at the wavelength of interest has to be uti… ▽ More Wire grid polarizers (WGPs), periodic nano-optical meta-surfaces, are convenient polarizing elements for many optical applications. However, they are still inadequate in the deep ultraviolet spectral range. We show that to achieve high performance ultraviolet WGPs a material with large absolute value of the complex permittivity and extinction coefficient at the wavelength of interest has to be utilized. This requirement is compared to refractive index models considering intraband and interband absorption processes. We elucidate why the extinction ratio of metallic WGPs intrinsically humble in the deep ultraviolet, whereas wide bandgap semiconductors are superior material candidates in this spectral range. To demonstrate this, we present the design, fabrication and optical characterization of a titanium dioxide WGP. At a wavelength of 193 nm an unprecedented extinction ratio of 384 and a transmittance of 10 % is achieved. △ Less

Submitted 17 July, 2016; originally announced July 2016.

Comments: 21 pages, Advanced Optical Materials 2016

MSC Class: 78A99

Table-Top Milliwatt-Class Extreme Ultraviolet High Harmonic Light Source

Authors: Robert Klas, Stefan Demmler, Maxim Tschernajew, Steffen Hädrich, Yariv Shamir, Andreas Tünnermann, Jan Rothhardt, Jens Limpert

Abstract: Extreme ultraviolet (XUV) lasers are essential for the investigation of fundamental physics. Especially high repetition rate, high photon flux sources are of major interest for reducing acquisition times and improving signal to noise ratios in a plethora of applications. Here, an XUV source based on cascaded frequency conversion is presented, which delivers due to the drastic better single atom re… ▽ More Extreme ultraviolet (XUV) lasers are essential for the investigation of fundamental physics. Especially high repetition rate, high photon flux sources are of major interest for reducing acquisition times and improving signal to noise ratios in a plethora of applications. Here, an XUV source based on cascaded frequency conversion is presented, which delivers due to the drastic better single atom response for short wavelength drivers, an average output power of (832 +- 204) μW at 21.7 eV. This is the highest average power produced by any HHG source in this spectral range surpassing precious demonstrations by more than a factor of four. Furthermore, a narrow-band harmonic at 26.6 eV with a relative energy bandwidth of only ΔE/E= 1.8 x 10E-3 has been generated, which is of high interest for high precision spectroscopy experiments. △ Less

Submitted 11 July, 2016; originally announced July 2016.

Comments: 4 Pages, 4 Pictures

Report number: Vol. 3, No 11

Journal ref: Optica, 2016

High Speed and High Resolution Table-Top Nanoscale Imaging

Authors: G. K. Tadesse, R. Klas, S. Demmler, S. HÄdrich, I. Wahyutama, M. Steinert, C. Spielmann, M. ZÜrch, A. TÜnnermann, J. Limpert, J. Rothhardt

Abstract: We present a table-top coherent diffraction imaging (CDI) experiment based on high-order harmonics generated at 18 nm by a high average power femtosecond fiber laser system. The high photon flux, narrow spectral bandwidth and high degree of spatial coherence allow for ultra-high sub-wavelength resolution imaging at a high numerical aperture. Our experiments demonstrate a half-pitch resolution of 1… ▽ More We present a table-top coherent diffraction imaging (CDI) experiment based on high-order harmonics generated at 18 nm by a high average power femtosecond fiber laser system. The high photon flux, narrow spectral bandwidth and high degree of spatial coherence allow for ultra-high sub-wavelength resolution imaging at a high numerical aperture. Our experiments demonstrate a half-pitch resolution of 13.6 nm, very close to the actual Abbe-limit of 12.4 nm, which is the highest resolution achieved from any table-top XUV or X-ray microscope. In addition, 20.5 nm resolution was achieved with only 3 sec of integration time bringing live diffraction imaging and 3D tomography on the nanoscale one step closer to reality. The current resolution is solely limited by the wavelength and the detector size. Thus, table-top nanoscopes with only a few-nm resolutions are in reach and will find applications in many areas of science and technology. △ Less

Submitted 10 May, 2016; originally announced May 2016.

Comments: 5 pages, 5 figures

High-repetition-rate and high-photon-flux 70 eV high-harmonic source for coincidence ion imaging of gas-phase molecules

Authors: Jan Rothhardt, Steffen Hädrich, Yariv Shamir, Maxim Tschnernajew, Robert Klas, Armin Hoffmann, Getnet K. Tadesse, Arno Klenke, Thomas Gottschall, Tino Eidam, Jens Limpert, Andreas Tünnermann, Rebecca Boll, Cedric Bomme, Hatem Dachraoui, Benjamin Erk, Michele Di Fraia, Daniel A. Horke, Thomas Kierspel, Terence Mullins, Andreas Przystawik, Evgeny Savelyev, Joss Wiese, Tim Laarmann, Jochen Küpper , et al. (1 additional authors not shown)

Abstract: Unraveling and controlling chemical dynamics requires techniques to image structural changes of molecules with femtosecond temporal and picometer spatial resolution. Ultrashort-pulse x-ray free-electron lasers have significantly advanced the field by enabling advanced pump-probe schemes. There is an increasing interest in using table-top photon sources enabled by high-harmonic generation of ultras… ▽ More Unraveling and controlling chemical dynamics requires techniques to image structural changes of molecules with femtosecond temporal and picometer spatial resolution. Ultrashort-pulse x-ray free-electron lasers have significantly advanced the field by enabling advanced pump-probe schemes. There is an increasing interest in using table-top photon sources enabled by high-harmonic generation of ultrashort-pulse lasers for such studies. We present a novel high-harmonic source driven by a 100 kHz fiber laser system, which delivers 10$^{11}$ photons/s in a single 1.3 eV bandwidth harmonic at 68.6 eV. The combination of record-high photon flux and high repetition rate paves the way for time-resolved studies of the dissociation dynamics of inner-shell ionized molecules in a coincidence detection scheme. First coincidence measurements on CH$_3$I are shown and it is outlined how the anticipated advancement of fiber laser technology and improved sample delivery will, in the next step, allow pump-probe studies of ultrafast molecular dynamics with table-top XUV-photon sources. These table-top sources can provide significantly higher repetition rates than the currently operating free-electron lasers and they offer very high temporal resolution due to the intrinsically small timing jitter between pump and probe pulses. △ Less

Submitted 28 April, 2016; v1 submitted 11 February, 2016; originally announced February 2016.

Cancellation of lateral displacement noise of 3-port gratings for coupling light to cavities

Authors: Melanie Meinders, Stefanie Kroker, Amrit Pal Singh, Ernst-Bernhard Kley, Andreas Tünnermann, Karsten Danzmann, Roman Schnabel

Abstract: Reflection gratings enable light coupling to optical cavities without transmission through substrates. Gratings that have three ports and are mounted in second-order Littrow configuration even allow the coupling to high-finesse cavities using low diffraction efficiencies. In contrast to conventional transmissive cavity couplers, however, the phase of the diffracted light depends on the lateral pos… ▽ More Reflection gratings enable light coupling to optical cavities without transmission through substrates. Gratings that have three ports and are mounted in second-order Littrow configuration even allow the coupling to high-finesse cavities using low diffraction efficiencies. In contrast to conventional transmissive cavity couplers, however, the phase of the diffracted light depends on the lateral position of the grating, which introduces an additional noise coupling. Here we experimentally demonstrate that this kind of noise cancels out once both diffracted output ports of the grating are combined. We achieve the same signal-to-shot-noise ratio as for a conventional coupler. From this perspective, 3-port grating couplers in second-order Littrow configuration remain a valuable approach to reducing optical absorption of cavity coupler substrates in future gravitational wave detectors. △ Less

Submitted 29 April, 2015; v1 submitted 4 March, 2015; originally announced March 2015.

Journal ref: Opt. Lett. 40, 2053-2055 (2015)

Upper Limit to the Transverse to Longitudinal Motion Coupling of a Waveguide Mirror

Authors: S. Leavey, B. W. Barr, A. S. Bell, E-B. Kley, N. Gordon, C. Gräf, S. Hild, S. H. Huttner, S. Kroker, J. Macarthur, C. Messenger, M. Pitkin, B. Sorazu, K. Strain, A. Tünnermann

Abstract: Waveguide mirrors possess nano-structured surfaces which can potentially provide a significant reduction in thermal noise over conventional dielectric mirrors. To avoid introducing additional phase noise from motion of the mirror transverse to the reflected light, however, they must possess a mechanism to suppress the phase effects associated with the incident light translating across the nano-str… ▽ More Waveguide mirrors possess nano-structured surfaces which can potentially provide a significant reduction in thermal noise over conventional dielectric mirrors. To avoid introducing additional phase noise from motion of the mirror transverse to the reflected light, however, they must possess a mechanism to suppress the phase effects associated with the incident light translating across the nano-structured surface. It has been shown that with carefully chosen parameters this additional phase noise can be suppressed. We present an experimental measurement of the coupling of transverse to longitudinal displacements in such a waveguide mirror designed for 1064 nm light. We place an upper limit on the level of measured transverse to longitudinal coupling of one part in seventeen thousand with 95% confidence, representing a significant improvement over a previously measured grating mirror. △ Less

Submitted 10 August, 2015; v1 submitted 6 October, 2014; originally announced October 2014.

Journal ref: Class. Quantum Grav. 32 (2015) 175005

High photon flux table-top coherent extreme ultraviolet source

Authors: Steffen Hädrich, Arno Klenke, Jan Rothhardt, Manuel Krebs, Armin Hoffmann, Oleg Pronin, Vladimir Pervak, Jens Limpert, Andreas Tünnermann

Abstract: High harmonic generation (HHG) enables extreme ultraviolet radiation with table-top setups. Its exceptional properties, such as coherence and (sub)-femtosecond pulse durations, have led to a diversity of applications. Some of these require a high photon flux and megahertz repetition rates, e.g. to avoid space charge effects in photoelectron spectroscopy. To date this has only been achieved with en… ▽ More High harmonic generation (HHG) enables extreme ultraviolet radiation with table-top setups. Its exceptional properties, such as coherence and (sub)-femtosecond pulse durations, have led to a diversity of applications. Some of these require a high photon flux and megahertz repetition rates, e.g. to avoid space charge effects in photoelectron spectroscopy. To date this has only been achieved with enhancement cavities. Here, we establish a novel route towards powerful HHG sources. By achieving phase-matched HHG of a megahertz fibre laser we generate a broad plateau (25 eV - 40 eV) of strong harmonics, each containing more than $10^{12}$ photons/s, which constitutes an increase by more than one order of magnitude in that wavelength range. The strongest harmonic (H25, 30 eV) has an average power of 143 $μ$W ($3\cdot10^{13}$ photons/s). This concept will greatly advance and facilitate applications in photoelectron or coincidence spectroscopy, coherent diffractive imaging or (multidimensional) surface science. △ Less

Submitted 18 March, 2014; originally announced March 2014.

Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources

Authors: S. M. Hooker, R. Bartolini, S. P. D. Mangles, A. Tünnermann, L. Corner, J. Limpert, A. Seryi, R. Walczak

Abstract: Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the… ▽ More Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the prospects for exciting the plasma wave with trains of low-energy laser pulses rather than a single high-energy pulse. Resonantly exciting the wakefield in this way would enable the use of different technologies, such as fibre or thin-disc lasers, which are able to operate at multi-kilohertz pulse repetition rates and with wall-plug efficiencies two orders of magnitude higher than current laser systems. We outline the parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that they could drive compact X-ray sources with average photon fluxes comparable to those of third-generation light source but with significantly improved temporal resolution. Likewise FEL operation could be driven with comparable peak power but with significantly larger repetition rates than extant FELs. △ Less

Submitted 30 January, 2014; originally announced January 2014.

Enhancing narrowband high order harmonic generation by Fano resonances

Authors: Jan Rothhardt, Steffen Hädrich, Stefan Demmler, Manuel Krebs, Stephan Fritzsche, Jens Limpert, Andreas Tünnermann

Abstract: Resonances in the photo-absorption spectrum of the generating medium can modify the spectrum of high order harmonics. In particular, window-type Fano resonances can reduce photo-absorption within a narrow spectral region and, consequently, lead to an enhanced emission of high-order harmonics in absorption-limited generation conditions. For high harmonic generation in argon it is shown that the 3s3… ▽ More Resonances in the photo-absorption spectrum of the generating medium can modify the spectrum of high order harmonics. In particular, window-type Fano resonances can reduce photo-absorption within a narrow spectral region and, consequently, lead to an enhanced emission of high-order harmonics in absorption-limited generation conditions. For high harmonic generation in argon it is shown that the 3s3p6 np 1P1 window resonances (n=4,5,6) give rise to enhanced photon yield. In particular, the 3s3p6 4p 1P1 resonance at 26.6 eV allows a relative enhancement up to a factor of 30 compared to the characteristic photon emission of the neighboring harmonic order. This enhanced, spectrally isolated and coherent photon emission line has a relative energy bandwidth of only ΔE/E=3*10-3. Therefore, it might be directly applied for precision spectroscopy or coherent diffractive imaging without the need of additional spectral filtering. The presented mechanism can be employed for tailoring and controlling the high harmonic emission of manifold target materials. △ Less

Submitted 13 January, 2014; originally announced January 2014.

Calculation of thermal noise in grating reflectors

Authors: Daniel Heinert, Stefanie Kroker, Daniel Friedrich, Stefan Hild, Ernst-Bernhard Kley, Sean Leavey, Iain W. Martin, Ronny Nawrodt, Andreas Tünnermann, Sergey P. Vyatchanin, Kazuhiro Yamamoto

Abstract: Grating reflectors have been repeatedly discussed to improve the noise performance of metrological applications due to the reduction or absence of any coating material. So far, however, no quantitative estimate on the thermal noise of these reflective structures exists. In this work we present a theoretical calculation of a grating reflector's noise. We further apply it to a proposed 3rd generatio… ▽ More Grating reflectors have been repeatedly discussed to improve the noise performance of metrological applications due to the reduction or absence of any coating material. So far, however, no quantitative estimate on the thermal noise of these reflective structures exists. In this work we present a theoretical calculation of a grating reflector's noise. We further apply it to a proposed 3rd generation gravitational wave detector. Depending on the grating geometry, the grating material and the temperature we obtain a thermal noise decrease by up to a factor of ten compared to conventional dielectric mirrors. Thus the use of grating reflectors can substantially improve the noise performance in metrological applications. △ Less

Submitted 30 August, 2013; originally announced August 2013.

Comments: 17 pages, 11 figures

Journal ref: Phys. Rev. D 88, 042001, 2013

High dispersive and monolithic 100% efficiency grisms

Authors: J. Reinhold, M. Schulze, E. -B. Kley, A. Tünnermann

Abstract: We present a type of grism, a series combination of transmission grating and prism, in which we reduce the number of diffraction orders and achieve a configuration with very high angular dispersion. The grism can be fabricated from a single dielectric material and requires no metallic or dielectric film layers for high transmission diffraction efficiency. One can reach 100% in the -1st transmissio… ▽ More We present a type of grism, a series combination of transmission grating and prism, in which we reduce the number of diffraction orders and achieve a configuration with very high angular dispersion. The grism can be fabricated from a single dielectric material and requires no metallic or dielectric film layers for high transmission diffraction efficiency. One can reach 100% in the -1st transmission diffraction order and the equal damage threshold as the dielectric bulk material. We realized such an element in fused silica with an efficiency of more then 99%. The bevel backside reflection is reduced by a statistical antireflective structure, so we measured an efficiency of the entire grism of 95% at a single wavelength. △ Less

Submitted 22 November, 2012; originally announced November 2012.

Contribution of the magnetic resonance to the third harmonic generation from a fishnet metamaterial

Authors: J. Reinhold, M. R. Shcherbakov, A. Chipouline, V. I. Panov, C. Helgert, T. Paul, C. Rockstuhl, F. Lederer, E. -B. Kley, A. Tünnermann, A. A. Fedyanin, T. Pertsch

Abstract: We investigate experimentally and theoretically the third harmonic generated by a double-layer fishnet metamaterial. To unambiguously disclose most notably the influence of the magnetic resonance, the generated third harmonic was measured as a function of the angle of incidence. It is shown experimentally and numerically that when the magnetic resonance is excited by pump beam, the angular depende… ▽ More We investigate experimentally and theoretically the third harmonic generated by a double-layer fishnet metamaterial. To unambiguously disclose most notably the influence of the magnetic resonance, the generated third harmonic was measured as a function of the angle of incidence. It is shown experimentally and numerically that when the magnetic resonance is excited by pump beam, the angular dependence of the third harmonic signal has a local maximum at an incidence angle of θ \simeq 20°. This maximum is shown to be a fingerprint of the antisymmetric distribution of currents in the gold layers. An analytical model based on the nonlinear dynamics of the electrons inside the gold shows excellent agreement with experimental and numerical results. This clearly indicates the difference in the third harmonic angular pattern at electric and magnetic resonances of the metamaterial. △ Less

Submitted 22 November, 2012; v1 submitted 11 August, 2012; originally announced August 2012.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. B (86), 115401 (2012)

Strain-induced pseudomagnetic field and Landau levels in photonic structures

Authors: Mikael C. Rechtsman, Julia M. Zeuner, Andreas Tünnermann, Stefan Nolte, Mordechai Segev, Alexander Szameit

Abstract: Magnetic effects at optical frequencies are notoriously weak. This is evidenced by the fact that the magnetic permeability of nearly all materials is unity in the optical frequency range, and that magneto-optical devices (such as Faraday isolators) must be large in order to allow for a sufficiently strong effect. In graphene, however, it has been shown that inhomogeneous strains can induce 'pseudo… ▽ More Magnetic effects at optical frequencies are notoriously weak. This is evidenced by the fact that the magnetic permeability of nearly all materials is unity in the optical frequency range, and that magneto-optical devices (such as Faraday isolators) must be large in order to allow for a sufficiently strong effect. In graphene, however, it has been shown that inhomogeneous strains can induce 'pseudomagnetic fields' that behave very similarly to real fields. Here, we show experimentally and theoretically that, by properly structuring a dielectric lattice, it is possible to induce a pseudomagnetic field at optical frequencies in a photonic lattice, where the propagation dynamics is equivalent to the evolution of an electronic wavepacket in graphene. To our knowledge, this is the first realization of a pseudomagnetic field in optics. The induced field gives rise to multiple photonic Landau levels (singularities in the density of states) separated by band gaps. We show experimentally and numerically that the gaps between these Landau levels give rise to transverse confinement of the optical modes. The use of strain allows for the exploration of magnetic effects in a non-resonant way that would be otherwise inaccessible in optics. Employing inhomogeneous strain to induce pseudomagnetism suggests the possibility that aperiodic photonic crystal structures can achieve greater field-enhancement and slow-light effects than periodic structures via the high density-of-states at Landau levels. Generalizing these concepts to other systems beyond optics, for example with matter waves in optical potentials, offers new intriguing physics that is fundamentally different from that in purely periodic structures. △ Less

Submitted 16 July, 2012; originally announced July 2012.

Comments: 24 pages including supplementary information section, 4 figures

Expansion of a wave-packet in lattices with disorder and nonlinearity

Authors: Uta Naether, Santiago Rojas-Rojas, Alejandro J. Martinez, Simon Sützer, Andreas Tünnermann, Stefan Nolte, Mario I. Molina, Rodrigo A. Vicencio, Alexander Szameit

Abstract: We show, theoretically and experimentally, the counterintuitive result that an increase of disorder can result in an enhanced spreading of an initially localized excitation. Moreover, we find that adding a focusing nonlinearity facilitates the expansion of the wave-packet even further by increasing its effective size. We find a clear transition between between the regions of enhanced spreading (we… ▽ More We show, theoretically and experimentally, the counterintuitive result that an increase of disorder can result in an enhanced spreading of an initially localized excitation. Moreover, we find that adding a focusing nonlinearity facilitates the expansion of the wave-packet even further by increasing its effective size. We find a clear transition between between the regions of enhanced spreading (weak disorder) and localization (strong localization) described by a "diffusion peak". △ Less

Submitted 24 May, 2012; originally announced May 2012.

Journal ref: Optics Express, Vol. 21, Issue 1, pp. 927-934 (2013)

Biphoton generation in quadratic waveguide arrays: A classical optical simulation

Authors: Markus Gräfe, Alexander. S. Solntsev, Robert Keil, Andrey. A. Sukhorukov, Matthias Heinrich, Andreas Tünnermann, Stefan Nolte, Alexander Szameit, Yuri S. Kivshar

Abstract: Quantum entanglement, the non-separability of a multipartite wave function, became essential in understanding the non-locality of quantum mechanics. In optics, this non-locality can be demonstrated on impressively large length scales, as photons travel with the speed of light and interact only weakly with their environment. With the discovery of spontaneous parametric down-conversion (SPDC) in non… ▽ More Quantum entanglement, the non-separability of a multipartite wave function, became essential in understanding the non-locality of quantum mechanics. In optics, this non-locality can be demonstrated on impressively large length scales, as photons travel with the speed of light and interact only weakly with their environment. With the discovery of spontaneous parametric down-conversion (SPDC) in nonlinear crystals, an efficient source for entangled photon pairs, so-called biphotons, became available. It has recently been shown that SPDC can also be implemented in nonlinear arrays of evanescently coupled waveguides which allows the generation and the investigation of correlated quantum walks of such biphotons in an integrated device. Here, we analytically and experimentally demonstrate that the biphoton degrees of freedom are entailed in an additional spatial dimension, therefore the SPDC and the subsequent quantum random walk in one-dimensional (1D) arrays can be simulated through classical optical beam propagation in a two-dimensional (2D) photonic lattice. Thereby, the output intensity images directly represent the biphoton correlations and exhibit a clear violation of a Bell-type inequality. △ Less

Submitted 18 May, 2012; originally announced May 2012.

Journal ref: Scientific Reports 2, 562 (2012)

Anderson cross-localization

Authors: S. Stutzer, Y. V. Kartashov, V. A. Vysloukh, A. Tunnermann, S. Nolte, M. Lewenstein, L. Torner, A. Szameit

Abstract: We report Anderson localization in two-dimensional optical waveguide arrays with disorder in waveguide separation introduced along one axis of the array, in an uncorrelated fashion for each waveguide row. We show that the anisotropic nature of such disorder induces a strong localization along both array axes. The degree of localization in the cross-axis remains weaker than that in the direction in… ▽ More We report Anderson localization in two-dimensional optical waveguide arrays with disorder in waveguide separation introduced along one axis of the array, in an uncorrelated fashion for each waveguide row. We show that the anisotropic nature of such disorder induces a strong localization along both array axes. The degree of localization in the cross-axis remains weaker than that in the direction in which disorder is introduced. This effect is illustrated both theoretically and experimentally. △ Less

Submitted 13 March, 2012; originally announced March 2012.

Comments: 4 pages, 4 figures, to appear in Optics Letters

Journal ref: Optics Letters 37, 1715 (2012)

Observation of the gradual transition from one-dimensional to two-dimensional Anderson localization

Authors: U. Naether, Y. V. Kartashov, V. A. Vysloukh, S. Nolte, A. Tunnermann, L. Torner, A. Szameit

Abstract: We study the gradual transition from one-dimensional to two-dimensional Anderson localization upon transformation of the dimensionality of disordered waveguide arrays. An effective transition from one- to two-dimensional system is achieved by increasing the number of rows forming the arrays. We observe that, for a given disorder level, Anderson localization becomes weaker with increasing number of… ▽ More We study the gradual transition from one-dimensional to two-dimensional Anderson localization upon transformation of the dimensionality of disordered waveguide arrays. An effective transition from one- to two-dimensional system is achieved by increasing the number of rows forming the arrays. We observe that, for a given disorder level, Anderson localization becomes weaker with increasing number of rows, hence the effective dimension. △ Less

Submitted 1 February, 2012; originally announced February 2012.

Comments: 4 pages, 3 figures, to appear in Optics Letters

Journal ref: Optics Letters 37, 593 (2012)

Diffractively coupled Fabry-Perot resonator with power-recycling

Authors: Michael Britzger, Daniel Friedrich, Stefanie Kroker, Frank Brückner, Oliver Burmeister, Ernst-Bernhard Kley, Andreas Tünnermann, Karsten Danzmann, Roman Schnabel

Abstract: We demonstrate the optical coupling of two cavities without light transmission through a substrate. Compared to a conventional coupling component, that is a partially transmissive mirror, an all-reflective coupler avoids light absorption in the substrate and therefore associated thermal problems, and even allows the use of opaque materials with possibly favourable mechanical and thermal properties… ▽ More We demonstrate the optical coupling of two cavities without light transmission through a substrate. Compared to a conventional coupling component, that is a partially transmissive mirror, an all-reflective coupler avoids light absorption in the substrate and therefore associated thermal problems, and even allows the use of opaque materials with possibly favourable mechanical and thermal properties. Recently, the all-reflective coupling of two cavities with a low-efficiency 3-port diffraction grating was theoretically investigated. Such a grating has an additional (a third) port. However, it was shown that the additional port does not necessarily decrease the bandwidth of the coupled cavities. Such an all-reflective scheme for cavity coupling is of interest in the field of gravitational wave detection. In such detectors light that is resonantly enhanced inside the so-called power-recycling cavity is coupled to (kilometre-scale) Fabry-Perot resonators representing the arms of a Michelson interferometer. In order to achieve a high sensitivity over a broad spectrum, the Fabry-Perot resonators need to have a high bandwidth for a given (high) power build-up. We realized such an all-reflective coupling in a table-top experiment. Our findings are in full agreement with the theoretical model incorporating the characteristics of the 3-port grating used, and therefore encourage the application of all-reflective cavity couplers in future gravitational wave detectors. △ Less

Submitted 2 May, 2011; originally announced May 2011.

Waveguide grating mirror in a fully suspended 10 meter Fabry-Perot cavity

Authors: Daniel Friedrich, Bryan W. Barr, Frank Brückner, Stefan Hild, John Nelson, John Mcarthur, Michael V. Plissi, Matthew P. Edgar, Sabina H. Huttner, Borja Sorazu, Stefanie Kroker, Michael Britzger, Ernst-Bernhard Kley, Karsten Danzmann, Andreas Tünnermann, Ken A. Strain, Roman Schnabel

Abstract: We report on the first demonstration of a fully suspended 10m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall method and employing feedback to the laser frequency. From the achieved finesse of 790 the grating reflectivity was determined to exceed 99.2% at the laser wavelen… ▽ More We report on the first demonstration of a fully suspended 10m Fabry-Perot cavity incorporating a waveguide grating as the coupling mirror. The cavity was kept on resonance by reading out the length fluctuations via the Pound-Drever-Hall method and employing feedback to the laser frequency. From the achieved finesse of 790 the grating reflectivity was determined to exceed 99.2% at the laser wavelength of 1064\,nm, which is in good agreement with rigorous simulations. Our waveguide grating design was based on tantala and fused silica and included a ~20nm thin etch stop layer made of Al2O3 that allowed us to define the grating depth accurately during the fabrication process. Demonstrating stable operation of a waveguide grating featuring high reflectivity in a suspended low-noise cavity, our work paves the way for the potential application of waveguide gratings as mirrors in high-precision interferometry, for instance in future gravitational wave observatories. △ Less

Submitted 14 April, 2011; originally announced April 2011.

Point-by-point inscription of apodized fiber Bragg gratings

Authors: Robert J. Williams, Christian Voigtländer, Graham D. Marshall, Andreas Tünnermann, Stefan Nolte, M. J. Steel, Michael J. Withford

Abstract: We demonstrate apodized fiber Bragg gratings inscribed with a point-by-point technique. We tailor the grating phase and coupling amplitude through precise control over the longitudinal and transverse position of each laser-inscribed modification. This method of apodization is facilitated by the highly-localized, high-contrast modifications generated by focussed IR femtosecond laser inscription. Ou… ▽ More We demonstrate apodized fiber Bragg gratings inscribed with a point-by-point technique. We tailor the grating phase and coupling amplitude through precise control over the longitudinal and transverse position of each laser-inscribed modification. This method of apodization is facilitated by the highly-localized, high-contrast modifications generated by focussed IR femtosecond laser inscription. Our technique provides a simple method for the design and implementation of point-by-point fiber Bragg gratings with complex apodization profiles. △ Less

Submitted 12 April, 2011; originally announced April 2011.

Comments: 6 pages, 4 figures, article in review

Journal ref: Opt.Lett. 36 (2011) 2988-2990

Three-Dimensional Light Bullets in Arrays of Waveguides

Authors: Stefano Minardi, Falk Eilenberger, Yaroslav V. Kartashov, Alexander Szameit, Ulrich Röpke, Jens Kobelke, Key Schuster, Hartmut Bartelt, Stefan Nolte, Lluis Torner, Falk Lederer, Andreas Tünnermann, Thomas Pertsch

Abstract: We report the first experimental observation of 3D-LBs, excited by femtosecond pulses in a system featuring quasi-instantaneous cubic nonlinearity and a periodic, transversally-modulated refractive index. Stringent evidence of the excitation of LBs is based on time-gated images and spectra which perfectly match our numerical simulations. Furthermore, we reveal a novel evolution mechanism forcing t… ▽ More We report the first experimental observation of 3D-LBs, excited by femtosecond pulses in a system featuring quasi-instantaneous cubic nonlinearity and a periodic, transversally-modulated refractive index. Stringent evidence of the excitation of LBs is based on time-gated images and spectra which perfectly match our numerical simulations. Furthermore, we reveal a novel evolution mechanism forcing the LBs to follow varying dispersion/diffraction conditions, until they leave their existence range and decay. △ Less

Submitted 4 January, 2011; originally announced January 2011.

Comments: 4 pages, 5 figures - Published by the American Physical Society

Journal ref: Phys. Rev. Lett. 105, 263901 (2010)

Cladding mode coupling in highly localized fiber Bragg gratings: modal properties and transmission spectra

Authors: Jens Thomas, Nemanja Jovanovic, Ria G. Becker, Graham D. Marshall, Michael J. Withford, Andreas Tünnermann, Stefan Nolte, M. J. Steel

Abstract: The spectral characteristics of a fiber Bragg grating (FBG) with a transversely inhomogeneous refractive index profile, differs con- siderably from that of a transversely uniform one. Transmission spectra of inhomogeneous and asymmetric FBGs that have been inscribed with focused ultrashort pulses with the so-called point-by-point technique are investigated. The cladding mode resonances of such FBG… ▽ More The spectral characteristics of a fiber Bragg grating (FBG) with a transversely inhomogeneous refractive index profile, differs con- siderably from that of a transversely uniform one. Transmission spectra of inhomogeneous and asymmetric FBGs that have been inscribed with focused ultrashort pulses with the so-called point-by-point technique are investigated. The cladding mode resonances of such FBGs can span a full octave in the spectrum and are very pronounced (deeper than 20dB). Using a coupled-mode approach, we compute the strength of resonant coupling and find that coupling into cladding modes of higher azimuthal order is very sensitive to the position of the modification in the core. Exploiting these properties allows precise control of such reflections and may lead to many new sensing applications. △ Less

Submitted 11 November, 2010; originally announced November 2010.

Comments: Submission to OE, 16 pages, 6 figures

Asymmetric transmission of linearly polarized light at optical metamaterials

Authors: C. Menzel, C. Helgert, C. Rockstuhl, E. -B. Kley, A. Tünnermann, T. Pertsch, F. Lederer

Abstract: We experimentally demonstrate a three-dimensional chiral optical metamaterial that exhibits an asymmetric transmission for forwardly and backwardly propagating linearly polarized light. The observation of this novel effect requires a metamaterial composed of three-dimensional chiral metaatoms without any rotational symmetry. Our analysis is supported by a systematic investigation of the transmissi… ▽ More We experimentally demonstrate a three-dimensional chiral optical metamaterial that exhibits an asymmetric transmission for forwardly and backwardly propagating linearly polarized light. The observation of this novel effect requires a metamaterial composed of three-dimensional chiral metaatoms without any rotational symmetry. Our analysis is supported by a systematic investigation of the transmission matrices for arbitrarily complex, lossy media that allows deriving a simple criterion for asymmetric transmission in an arbitrary polarization base. Contrary to physical intuition, in general the polarization eigenstates in such three-dimensional and low-symmetry metamaterials do not obey fxed relations and the associated transmission matrices cannot be symmetrized. △ Less

Submitted 11 May, 2010; originally announced May 2010.

Realization of a monolithic high-reflectivity cavity mirror from a single silicon crystal

Authors: Frank Brückner, Daniel Friedrich, Tina Clausnitzer, Michael Britzger, Oliver Burmeister, Karsten Danzmann, Ernst-Bernhard Kley, Andreas Tünnermann, Roman Schnabel

Abstract: We report on the first experimental realization of a high-reflectivity cavity mirror that solely consists of a single silicon crystal. Since no material was added to the crystal, the urgent problem of 'coating thermal noise' that currently limits classical as well as quantum measurements is avoided. Our mirror is based on a surface nanostructure that creates a resonant surface waveguide. In full a… ▽ More We report on the first experimental realization of a high-reflectivity cavity mirror that solely consists of a single silicon crystal. Since no material was added to the crystal, the urgent problem of 'coating thermal noise' that currently limits classical as well as quantum measurements is avoided. Our mirror is based on a surface nanostructure that creates a resonant surface waveguide. In full agreement with a rigorous model we realized a reflectivity of (99.79+/-0.01)% at a wavelength of 1.55 μm, and achieved a cavity finesse of 2784. We anticipate that our achievement will open the avenue to next generation high-precision experiments targeting fundamental questions of physics. △ Less

Submitted 14 April, 2010; originally announced April 2010.

Comments: Phys. Rev. Lett., accepted

Plasmonic modes of extreme subwavelength nanocavities

Authors: Joerg Petschulat, Christian Helgert, Michael Steinert, Norbert Bergner, Carsten Rockstuhl, Falk Lederer, Thomas Pertsch, Andreas Tuennermann, Ernst-Bernhard Kley

Abstract: We study the physics of a new type of subwavelength nanocavities. They are based on U-shaped metal-insulator-metal waveguides supporting the excitation of surface plasmon polaritons. The waveguides are simultaneously excited from both sides of the U by incident plane waves. Due to their finite length discrete modes emerge within the nanocavity. We show that the excitation symmetry with respect to… ▽ More We study the physics of a new type of subwavelength nanocavities. They are based on U-shaped metal-insulator-metal waveguides supporting the excitation of surface plasmon polaritons. The waveguides are simultaneously excited from both sides of the U by incident plane waves. Due to their finite length discrete modes emerge within the nanocavity. We show that the excitation symmetry with respect to the cavity ends permits the observation of even and odd modes. Our investigations include near and far field simulations and predict a strong spectral far field response of the comparable small nanoresonators. The strong near field enhancement observed in the cavity at resonance might be suitable to increase the efficiency of nonlinear optical effects, quantum analogies and might facilitate the development of active optical elements, such as active plasmonic elements. △ Less

Submitted 14 April, 2010; originally announced April 2010.