-
Ultrafast, ultrabright, X-ray holography using a uniformly-redundant array
Authors:
S. Marchesini,
S. Boutet,
A. E. Sakdinawat,
M. J. Bogan,
S. Bajt,
A. Barty,
H. N. Chapman,
M. Frank,
S. P. Hau-Riege,
A. Szoke,
C. Cui,
M. R. Howells,
D. A. Shapiro,
J. C. H. Spence,
J. W. Shaevitz,
J. Y. Lee,
J. Hajdu,
M. M. Seibert
Abstract:
Advances in the development of free-electron lasers offer the realistic prospect of high-resolution imaging to study the nanoworld on the time-scale of atomic motions. We identify X-ray Fourier Transform holography, (FTH) as a promising but, so far, inefficient scheme to do this. We show that a uniformly redundant array (URA) placed next to the sample, multiplies the efficiency of X-ray FTH by m…
▽ More
Advances in the development of free-electron lasers offer the realistic prospect of high-resolution imaging to study the nanoworld on the time-scale of atomic motions. We identify X-ray Fourier Transform holography, (FTH) as a promising but, so far, inefficient scheme to do this. We show that a uniformly redundant array (URA) placed next to the sample, multiplies the efficiency of X-ray FTH by more than one thousand (approaching that of a perfect lens) and provides holographic images with both amplitude- and phase-contrast information. The experiments reported here demonstrate this concept by imaging a nano-fabricated object at a synchrotron source, and a bacterial cell at a soft X-ray free-electron-laser, where illumination by a single 15 fs pulse was successfully used in producing the holographic image. We expect with upcoming hard X-ray lasers to achieve considerably higher spatial resolution and to obtain ultrafast movies of excited states of matter.
△ Less
Submitted 8 February, 2008; v1 submitted 31 January, 2008;
originally announced January 2008.
-
Femtosecond Diffractive Imaging with a Soft-X-ray Free-Electron Laser
Authors:
Henry N. Chapman,
Anton Barty,
Michael J. Bogan,
Sebastien Boutet,
Matthias Frank,
Stefan P. Hau-Riege,
Stefano Marchesini,
Bruce W. Woods,
Sasa Bajt,
W. Henry Benner,
Richard A. London,
Elke Plonjes,
Marion Kuhlmann,
Rolf Treusch,
Stefan Dusterer,
Thomas Tschentscher,
Jochen R. Schneider,
Eberhard Spiller,
Thomas Moller,
Christoph Bostedt,
Matthias Hoener,
David A. Shapiro,
Keith O. Hodgson,
David van der Spoel,
Florian Burmeister
, et al. (9 additional authors not shown)
Abstract:
Theory predicts that with an ultrashort and extremely bright coherent X-ray pulse, a single diffraction pattern may be recorded from a large macromolecule, a virus, or a cell before the sample explodes and turns into a plasma. Here we report the first experimental demonstration of this principle using the FLASH soft X-ray free-electron laser. An intense 25 fs, 4 10^13 W/cm^2 pulse, containing 10…
▽ More
Theory predicts that with an ultrashort and extremely bright coherent X-ray pulse, a single diffraction pattern may be recorded from a large macromolecule, a virus, or a cell before the sample explodes and turns into a plasma. Here we report the first experimental demonstration of this principle using the FLASH soft X-ray free-electron laser. An intense 25 fs, 4 10^13 W/cm^2 pulse, containing 10^12 photons at 32 nm wavelength, produced a coherent diffraction pattern from a nano-structured non-periodic object, before destroying it at 60,000 K. A novel X-ray camera assured single photon detection sensitivity by filtering out parasitic scattering and plasma radiation. The reconstructed image, obtained directly from the coherent pattern by phase retrieval through oversampling, shows no measurable damage, and extends to diffraction-limited resolution. A three-dimensional data set may be assembled from such images when copies of a reproducible sample are exposed to the beam one by one.
△ Less
Submitted 10 October, 2006; v1 submitted 7 October, 2006;
originally announced October 2006.
-
SPEDEN: Reconstructing single particles from their diffraction patterns
Authors:
S. P. Hau-Riege,
H. Szoke,
H. N. Chapman,
A. Szoke,
S. Marchesini,
A. Noy,
H. He,
M. R. Howells,
U. Weierstall,
J. C. H. Spence
Abstract:
Speden is a computer program that reconstructs the electron density of single particles from their x-ray diffraction patterns, using a single-particle adaptation of the Holographic Method in crystallography. (Szoke, A., Szoke, H., and Somoza, J.R., 1997. Acta Cryst. A53, 291-313.) The method, like its parent, is unique that it does not rely on ``back'' transformation from the diffraction pattern…
▽ More
Speden is a computer program that reconstructs the electron density of single particles from their x-ray diffraction patterns, using a single-particle adaptation of the Holographic Method in crystallography. (Szoke, A., Szoke, H., and Somoza, J.R., 1997. Acta Cryst. A53, 291-313.) The method, like its parent, is unique that it does not rely on ``back'' transformation from the diffraction pattern into real space and on interpolation within measured data. It is designed to deal successfully with sparse, irregular, incomplete and noisy data. It is also designed to use prior information for ensuring sensible results and for reliable convergence. This article describes the theoretical basis for the reconstruction algorithm, its implementation and quantitative results of tests on synthetic and experimentally obtained data. The program could be used for determining the structure of radiation tolerant samples and, eventually, of large biological molecular structures without the need for crystallization.
△ Less
Submitted 18 March, 2004;
originally announced March 2004.
-
Coherent X-ray Diffractive Imaging; applications and limitations
Authors:
S. Marchesini,
H. N. Chapman,
S. P. Hau-Riege,
R. A. London,
A. Szoke,
H. He,
M. R. Howells,
H. Padmore,
R. Rosen,
J. C. H. Spence,
U. Weierstall
Abstract:
The inversion of a diffraction pattern offers aberration-free diffraction-limited 3D images without the resolution and depth-of-field limitations of lens-based tomographic systems, the only limitation being radiation damage. We review our experimental results, discuss the fundamental limits of this technique and future plans.
The inversion of a diffraction pattern offers aberration-free diffraction-limited 3D images without the resolution and depth-of-field limitations of lens-based tomographic systems, the only limitation being radiation damage. We review our experimental results, discuss the fundamental limits of this technique and future plans.
△ Less
Submitted 15 August, 2003;
originally announced August 2003.
-
Electron Cascades Produced by Photoelectrons in Diamond
Authors:
Beata Ziaja,
Abraham Szoeke,
Janos Hajdu
Abstract:
Secondary electron cascades are responsible for significant ionizations in macroscopic samples during irradiation with X-rays. A quantitative analysis of these cascades is needed, e.g. for assessing damage in optical components at X-ray free-electron lasers, and for understanding damage in samples exposed to the beam. Here we present results from Monte Carlo simulations, showing the space-time e…
▽ More
Secondary electron cascades are responsible for significant ionizations in macroscopic samples during irradiation with X-rays. A quantitative analysis of these cascades is needed, e.g. for assessing damage in optical components at X-ray free-electron lasers, and for understanding damage in samples exposed to the beam. Here we present results from Monte Carlo simulations, showing the space-time evolution of secondary electron cascades in diamond. These cascades follow the impact of a single primary electron at energies between 0.5-12 keV, representing the usual range for photoelectrons. The calculations describe the secondary ionizations caused by these electrons, the three-dimensional evolution of the electron cloud, and monitor the equivalent instantaneous temperature of the free-electron gas as the system cools during expansion. The dissipation of the impact energy proceeds predominantly through the production of secondary electrons whose energies are comparable to the binding energies of the valence (40-50 eV) and the core electrons (300 eV) in accordance with experiments and the models of interactions. The electron cloud generated by a 12 keV electron is strongly anisotropic in the early phases of the cascade (t <= 1 fs). At later times, the sample is dominated by low energy electrons, and these are scattered more isotropically by atoms in the sample. The results show that the emission of secondary electrons approaches saturation within about 100 fs, following the primary impact. At an impact energy of 12 keV, the total number of electrons liberated in the sample is <= 400 at 1000 fs. The results provide an understanding of ionizations by photoelectrons, and extend earlier models on low-energy electron cascades (E=0.25 keV, [ziaja,ziaja2]) to the higher energy regime of the photoelectrons.
△ Less
Submitted 27 August, 2002;
originally announced August 2002.
-
Space-time evolution of electron cascades in diamond
Authors:
Beata Ziaja,
Abraham Szoeke,
David van der Spoel,
Janos Hajdu
Abstract:
Here we describe model calculations to follow the spatio-temporal evolution of secondary electron cascades in diamond. The band structure of the insulator has been explicitly incorporated into the calculations as it affects ionizations from the valence band. A Monte-Carlo model was constructed to describe the path of electrons following the impact of a single electron of energy E 250 eV. The res…
▽ More
Here we describe model calculations to follow the spatio-temporal evolution of secondary electron cascades in diamond. The band structure of the insulator has been explicitly incorporated into the calculations as it affects ionizations from the valence band. A Monte-Carlo model was constructed to describe the path of electrons following the impact of a single electron of energy E 250 eV. The results show the evolution of the secondary electron cascades in terms of the number of electrons liberated, the spatial distribution of these electrons, and the energy distribution among the electrons as a function of time. The predicted ionization rates (5-13 electrons in 100 fs) lie within the limits given by experiments and phenomenological models. Calculation of the local electron density and the corresponding Debye length shows that the latter is systematically larger than the radius of the electron cloud. This means that the electron gas generated does not represent a plasma in a single impact cascade triggered by an electron of E 250 eV energy. This is important as it justifies the independent-electron approximation used in the model. At 1 fs, the (average) spatial distribution of secondary electrons is anisotropic with the electron cloud elongated in the direction of the primary impact. The maximal radius of the cascade is about 50 A at this time. As the system cools, energy is distributed more equally, and the spatial distribution of the electron cloud becomes isotropic. At 90 fs maximal radius is about 150 A. The Monte-Carlo model described here could be adopted for the investigation of radiation damage in other insulators and has implications for planned experiments with intense femtosecond X-ray sources.
△ Less
Submitted 20 March, 2002;
originally announced March 2002.
-
Shake-up and shake-off excitations with associated electron losses in X-ray studies of proteins
Authors:
Petter Persson,
Sten Lunell,
Abraham Szoeke,
Beata Ziaja,
Janos Hajdu
Abstract:
Photoionisation of an atom by X-rays usually removes an inner-shell electron from the atom, leaving behind a perturbed "hollow ion" whose relaxation may take different routes. In light elements, emission of an Auger electron is common. However, the energy and the total number of electrons released from the atom may be modulated by shake-up and shake-off effects. When the inner-shell electron lea…
▽ More
Photoionisation of an atom by X-rays usually removes an inner-shell electron from the atom, leaving behind a perturbed "hollow ion" whose relaxation may take different routes. In light elements, emission of an Auger electron is common. However, the energy and the total number of electrons released from the atom may be modulated by shake-up and shake-off effects. When the inner-shell electron leaves, the outer-shell electrons may find themselves in a state that is not an eigen-state of the atom in its surroundings. The resulting collective excitation is called shake-up. If this process also involves the release of low energy electrons from the outer shell, then the process is called shake-off. It is not clear how significant shake-up and shake-off contributions are to the overall ionisation of biological materials like proteins. In particular, the interaction between the out-going electron and the remaining system depends on the chemical environment of the atom, which can be studied by quantum chemical methods. Here we present calculations on model compounds to represent the most common chemical environments in proteins. The results show that the shake-up and shake-off processes affect about 20% of all emissions from nitrogen, 30% from carbon, 40% from oxygen, and 23% from sulphur. Triple and higher ionisations are rare for carbon, nitrogen and oxygen, but are frequent for sulphur. The findings are relevant to the design of biological experiments at emerging X-ray free-electron lasers.
△ Less
Submitted 11 October, 2001;
originally announced October 2001.
-
Auger-electron cascades in diamond and amorphous carbon
Authors:
Beata Ziaja,
David van der Spoel,
Abraham Szoeke,
Janos Hajdu
Abstract:
We have analyzed the cascade of secondary electrons in diamond and amorphous carbon generated by the thermalisation of a single Auger electron. The elastic electron mean free path was calculated as a function of impact energy in the muffin-tin potential approximation. The inelastic scattering cross section and the energy loss of the electron (expressed in terms of differential inverse mean free…
▽ More
We have analyzed the cascade of secondary electrons in diamond and amorphous carbon generated by the thermalisation of a single Auger electron. The elastic electron mean free path was calculated as a function of impact energy in the muffin-tin potential approximation. The inelastic scattering cross section and the energy loss of the electron (expressed in terms of differential inverse mean free path) were estimated from two "optical" models, that utilise the measured dielectric constants of the materials. Using these data, a Monte-Carlo model describing the time evolution of the cascade was constructed. The results show that at most around 20-40 secondary cascade electrons are released by a single Auger electron in a macroscopic sample of diamond or amorphous carbon. Consideration of the real band structure of diamond reduces this number further. The release of the cascade electrons happens within the first 100 femtoseconds after the emission of the primary Auger electron. The results have implications to planned experiments with femtosecond X-ray sources.
△ Less
Submitted 24 September, 2001;
originally announced September 2001.
