-
Evolution of dynamic fibrils from the cooler chromosphere to the hotter corona
Authors:
Sudip Mandal,
Hardi Peter,
Lakshmi Pradeep Chitta,
Sami K. Solanki,
Regina Aznar Cuadrado,
Udo Schühle,
Luca Teriaca,
Juan Martínez Sykora,
David Berghmans,
Frédéric Auchère,
Susanna Parenti,
Andrei N. Zhukov,
Éric Buchlin,
Cis Verbeeck,
Emil Kraaikamp,
Luciano Rodriguez,
David M. Long,
Krzysztof Barczynski,
Gabriel Pelouze,
Philip J. Smith
Abstract:
Dynamic fibrils (DFs) are commonly observed chromospheric features in solar active regions. Recent observations from the Extreme Ultraviolet Imager (EUI) aboard the Solar Orbiter have revealed unambiguous signatures of DFs at the coronal base, in extreme ultraviolet (EUV) emission. However, it remains unclear if the DFs detected in the EUV are linked to their chromospheric counterparts. Simultaneo…
▽ More
Dynamic fibrils (DFs) are commonly observed chromospheric features in solar active regions. Recent observations from the Extreme Ultraviolet Imager (EUI) aboard the Solar Orbiter have revealed unambiguous signatures of DFs at the coronal base, in extreme ultraviolet (EUV) emission. However, it remains unclear if the DFs detected in the EUV are linked to their chromospheric counterparts. Simultaneous detection of DFs from chromospheric to coronal temperatures could provide important information on their thermal structuring and evolution through the solar atmosphere. In this paper, we address this question by using coordinated EUV observations from the Atmospheric Imaging Assembly (AIA), Interface Region Imaging Spectrograph (IRIS), and EUI to establish a one-to-one correspondence between chromospheric and transition region DFs (observed by IRIS) with their coronal counterparts (observed by EUI and AIA). Our analysis confirms a close correspondence between DFs observed at different atmospheric layers, and reveals that DFs can reach temperatures of about 1.5 million Kelvin, typical of the coronal base in active regions. Furthermore, intensity evolution of these DFs, as measured by tracking them over time, reveals a shock-driven scenario in which plasma piles up near the tips of these DFs and, subsequently, these tips appear as bright blobs in coronal images. These findings provide information on the thermal structuring of DFs and their evolution and impact through the solar atmosphere.
△ Less
Submitted 10 September, 2023;
originally announced September 2023.
-
Numerical simulations and observations of Mg II in the solar chromosphere
Authors:
Viggo Hansteen,
Juan Martinez Sykora,
Mats Carlsson,
Bart De Pontieu,
Milan Gosic,
Souvik Bose
Abstract:
The Mg II h&k lines are amongst the best diagnostic tools of the upper solar chromosphere. This region of the atmosphere is of particular interest as it is the lowest region of the Sun's atmosphere where the magnetic field is dominant in the energetics and dynamics, defining its structure. While highly successful in the photosphere and lower to mid chromosphere, numerical models have produced synt…
▽ More
The Mg II h&k lines are amongst the best diagnostic tools of the upper solar chromosphere. This region of the atmosphere is of particular interest as it is the lowest region of the Sun's atmosphere where the magnetic field is dominant in the energetics and dynamics, defining its structure. While highly successful in the photosphere and lower to mid chromosphere, numerical models have produced syntheticMg II lines that do not match the observations well. We present a number of large scale models with magnetic field topologies representative of the quiet Sun, ephemeral flux regions and plage, and also models where the numerical resolution is high and where we go beyond the MHD paradigm. The results of this study show models with a much improved correspondence with \iris\ observations both in terms of intensities and widths, especially underscoring the importance of chromospheric mass loading and of capturing the magnetic field topology and evolution in simulations. This comes in addition to the importance of capturing the generation of small scale velocity fields and including non-equilibrium ionization and ion-neutral interaction effects. Understanding and modeling all these effects and their relative importance is necessary in order to reproduce observed spectral features.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Chromospheric Heating from Local Magnetic Growth and Ambipolar Diffusion Under Non-Equilibrium Conditions
Authors:
Juan Martínez Sykora,
Jaime de la Cruz Rodríguez,
Milan Gošić,
Alberto Sainz Dalda,
Viggo H. Hansteen,
Bart De Pontieu
Abstract:
The heating of the chromosphere in internetwork regions remains one of the foremost open questions in solar physics. In the present study we tackle this old problem by using a very high spatial-resolution simulation of quiet-Sun conditions performed with radiative MHD numerical models and IRIS observations. We have expanded a previously existing 3D radiative MHD numerical model of the solar atmosp…
▽ More
The heating of the chromosphere in internetwork regions remains one of the foremost open questions in solar physics. In the present study we tackle this old problem by using a very high spatial-resolution simulation of quiet-Sun conditions performed with radiative MHD numerical models and IRIS observations. We have expanded a previously existing 3D radiative MHD numerical model of the solar atmosphere, which included self-consistently locally driven magnetic amplification in the chromosphere, by adding ambipolar diffusion and time-dependent non-equilibrium hydrogen ionization to the model. The energy of the magnetic field is dissipated in the upper chromosphere, providing a large temperature increase due to ambipolar diffusion and the non-equilibrium ionization (NEQI). At the same time, we find that adding the ambipolar diffusion and NEQI in the simulation has a minor impact on the local growth of the magnetic field in the lower chromosphere and its dynamics. Our comparison between synthesized Mg II profiles from these high spatial resolution models, with and without ambipolar diffusion and NEQI, and quiet Sun and coronal hole observations from IRIS now reveal a better correspondence. The intensity of profiles is increased and the line cores are slightly broader when ambipolar diffusion and NEQI effects are included. Therefore, the Mg II profiles are closer to those observed than in previous models, but some differences still remain.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Fluctuation effects at the onset of $\bf 2k_F$ density wave order with two pairs of hot spots in two-dimensional metals
Authors:
Jáchym Sýkora,
Walter Metzner
Abstract:
We analyze quantum fluctuation effects at the onset of charge or spin density wave order in two-dimensional metals with an incommensurate nesting ($2k_F$) wave vector connecting two pairs of hot spots on the Fermi surface. We first compute the momentum and frequency dependence of the fermion self-energy near the hot spots to leading order in a perturbation expansion (one loop). Non-Fermi liquid be…
▽ More
We analyze quantum fluctuation effects at the onset of charge or spin density wave order in two-dimensional metals with an incommensurate nesting ($2k_F$) wave vector connecting two pairs of hot spots on the Fermi surface. We first compute the momentum and frequency dependence of the fermion self-energy near the hot spots to leading order in a perturbation expansion (one loop). Non-Fermi liquid behavior with a linear (in energy) quasi-particle decay rate and a logarithmically vanishing quasi-particle weight is obtained. The momentum dependence of the self-energy entails only finite renormalizations of the Fermi velocity and the Fermi surface curvature at the hot spots. The perturbative one-loop result is not self-consistent and casts doubt on the stability of the $2k_F$ quantum critical point. We construct a self-consistent solution of the one-loop equations with self-energy feedback, where the quantum critical point is stabilized rather than being destroyed by fluctuations, while the non-Fermi liquid behavior as found in the perturbative one-loop calculation is confirmed.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
Fluctuation effects at the onset of $\bf 2k_F$ density wave order with one pair of hot spots in two-dimensional metals
Authors:
Jáchym Sýkora,
Tobias Holder,
Walter Metzner
Abstract:
We analyze quantum fluctuation effects at the onset of charge or spin density wave order in two-dimensional metals with an incommensurate $2k_F$ wave vector connecting a single pair of hot spots on the Fermi surface. We compute the momentum and frequency dependence of the fermion self-energy near the hot spots to leading order in a fluctuation expansion (one loop). Non-Fermi liquid behavior with a…
▽ More
We analyze quantum fluctuation effects at the onset of charge or spin density wave order in two-dimensional metals with an incommensurate $2k_F$ wave vector connecting a single pair of hot spots on the Fermi surface. We compute the momentum and frequency dependence of the fermion self-energy near the hot spots to leading order in a fluctuation expansion (one loop). Non-Fermi liquid behavior with anomalous frequency scaling and a vanishing quasi particle weight is obtained. The momentum dependence yields a divergent renormalization of the Fermi velocity and a flattening of the Fermi surface near the hot spots. Going beyond the leading order calculation we find that the one-loop result is not self-consistent. We show that any momentum-independent self-energy with a non-Fermi liquid frequency exponent wipes out the peak of the polarization function at the $2k_F$ wave vector, and thus destroys the mechanism favoring $2k_F$ density waves over those with generic wave vectors. However, a $2k_F$ density wave quantum critical point might survive in presence of a sufficiently flat renormalized Fermi surface.
△ Less
Submitted 14 November, 2018; v1 submitted 15 January, 2018;
originally announced January 2018.
-
Neutron detectors for the ESS diffractometers
Authors:
I. Stefanescu,
M. Christensen,
J. Fenske,
R. Hall-Wilton,
P. F. Henry,
O. Kirstein,
M. Mueller,
G. Nowak,
D. Pooley,
D. Raspino,
N. Rhodes,
J. Saroun,
J. Schefer,
E. Schooneveld,
J. Sykora,
W. Schweika
Abstract:
The ambitious instrument suite for the future European Spallation Source whose civil construction started recently in Lund, Sweden, demands a set of diverse and challenging requirements for the neutron detectors. For instance, the unprecedented high flux expected on the samples to be investigated in neutron diffraction or reflectometry experiments requires detectors that can handle high counting r…
▽ More
The ambitious instrument suite for the future European Spallation Source whose civil construction started recently in Lund, Sweden, demands a set of diverse and challenging requirements for the neutron detectors. For instance, the unprecedented high flux expected on the samples to be investigated in neutron diffraction or reflectometry experiments requires detectors that can handle high counting rates, while the investigation of sub-millimeter protein crystals will only be possible with large-area detectors that can achieve a position resolution as low as 200 μm. This has motivated an extensive research and development campaign to advance the state-of-the-art detector and to find new technologies that can reach maturity by the time the ESS will operate at full potential. This paper presents the key detector requirements for three of the Time-of-Flight diffraction instrument concepts selected by the Scientific Advisory Committee to advance into the phase of preliminary engineering design. We discuss the available detector technologies suitable for this particular instrument class and their major challenges. The detector technologies selected by the instrument teams to collect the diffraction patterns are briefly discussed. Analytical calculations, Monte-Carlo simulations, and real experimental data are used to develop a generic method to esti- mate the event rate in the diffraction detectors. The proposed approach is based upon conservative assumptions that use information and input parameters that reflect our current level of knowledge and understanding of the ESS project. We apply this method to make predictions for the future diffraction instruments, and thus provide additional information that can help the instrument teams with the optimisation of the detector designs.
△ Less
Submitted 29 November, 2016; v1 submitted 8 July, 2016;
originally announced July 2016.
-
Compression and Reconstruction of Random Microstructures using Accelerated Lineal Path Function
Authors:
Jan Havelka,
Anna Kučerová,
Jan Sýkora
Abstract:
Microstructure reconstruction and compression techniques are designed to find a microstructure with desired properties. While the microstructure reconstruction searches for a microstructure with prescribed statistical properties, the microstructure compression focuses on efficient representation of material morphology for a purpose of multiscale modelling. Successful application of those technique…
▽ More
Microstructure reconstruction and compression techniques are designed to find a microstructure with desired properties. While the microstructure reconstruction searches for a microstructure with prescribed statistical properties, the microstructure compression focuses on efficient representation of material morphology for a purpose of multiscale modelling. Successful application of those techniques, nevertheless, requires proper understanding of underlying statistical descriptors quantifying material morphology. In this paper we focus on the lineal path function designed to capture namely short-range effects and phase connectedness, which can be hardly handled by the commonly used two-point probability function. The usage of the lineal path function is, however, significantly limited by huge computational requirements. So as to examine the properties of the lineal path function within the computationally exhaustive compression and reconstruction processes, we start with the acceleration of the lineal path evaluation, namely by porting part of its code to the graphics processing unit using the CUDA (Compute Unified Device Architecture) programming environment. This allows us to present a unique comparison of the entire lineal path function with the commonly used rough approximation based on the Monte Carlo and/or sampling template. Moreover, the accelerated version of the lineal path function is then compared with the two-point probability function within the compression and reconstruction of two-phase morphologies. Their significant features are thoroughly discussed and illustrated on a set of artificial periodic as well as real-world random microstructures.
△ Less
Submitted 17 January, 2016;
originally announced January 2016.
-
Modeling of Degradation Processes in Historical Mortars
Authors:
J. Sýkora
Abstract:
The aim of presented paper is modeling of degradation processes in historical mortars exposed to moisture impact during freezing. Internal damage caused by ice crystallization in pores is one of the most important factors limiting the service life of historical structures. Coupling the transport processes with the mechanical part will allow us to address the impact of moisture on the durability, s…
▽ More
The aim of presented paper is modeling of degradation processes in historical mortars exposed to moisture impact during freezing. Internal damage caused by ice crystallization in pores is one of the most important factors limiting the service life of historical structures. Coupling the transport processes with the mechanical part will allow us to address the impact of moisture on the durability, strength and stiffness of mortars. This should be accomplished with the help of a complex thermo-hygro-mechanical model representing one of the prime objectives of this work. The proposed formulation is based on the extension of the classical poroelasticity models with the damage mechanics. An example of two-dimensional moisture transport in the environment with temperature below freezing point is presented to support the theoretical derivations.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
-
Homogenization of coupled heat and moisture transport in masonry structures including interfaces
Authors:
Jan Sýkora,
Michal Šejnoha,
Jiří Šejnoha
Abstract:
Homogenization of a simultaneous heat and moisture flow in a masonry wall is presented in this paper. The principle objective is to examine an impact of the assumed imperfect hydraulic contact on the resulting homogenized properties. Such a contact is characterized by a certain mismatching resistance allowing us to represent a discontinuous evolution of temperature and moisture fields across the i…
▽ More
Homogenization of a simultaneous heat and moisture flow in a masonry wall is presented in this paper. The principle objective is to examine an impact of the assumed imperfect hydraulic contact on the resulting homogenized properties. Such a contact is characterized by a certain mismatching resistance allowing us to represent a discontinuous evolution of temperature and moisture fields across the interface, which is in general attributed to discontinuous capillary pressures caused by different pore size distributions of the adjacent porous materials. In achieving this, two particular laboratory experiments were performed to provide distributions of temperature and relative humidity in a sample of the masonry wall, which in turn served to extract the corresponding jumps and subsequently to obtain the required interface transition parameters by matching numerical predictions and experimental results. The results suggest a low importance of accounting for imperfect hydraulic contact for the derivation of macroscopic homogenized properties. On the other hand, they strongly support the need for a fully coupled multi-scale analysis due to significant dependence of the homogenized properties on actual moisture gradients and corresponding values of both macroscopic temperature and relative humidity.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
-
Uncertainty Propagation in Elasto-Plastic Material
Authors:
Jan Sýkora,
Anna Kučerová
Abstract:
Macroscopically heterogeneous materials, characterised mostly by comparable heterogeneity lengthscale and structural sizes, can no longer be modelled by deterministic approach instead. It is convenient to introduce stochastic approach with uncertain material parameters quantified as random fields and/or random variables. The present contribution is devoted to propagation of these uncertainties in…
▽ More
Macroscopically heterogeneous materials, characterised mostly by comparable heterogeneity lengthscale and structural sizes, can no longer be modelled by deterministic approach instead. It is convenient to introduce stochastic approach with uncertain material parameters quantified as random fields and/or random variables. The present contribution is devoted to propagation of these uncertainties in mechanical modelling of inelastic behaviour. In such case the Monte Carlo method is the traditional approach for solving the proposed problem. Nevertheless, convergence rate is relatively slow, thus new methods (e.g. stochastic Galerkin method, stochastic collocation approach, etc.) have been recently developed to offer fast convergence for sufficiently smooth solution in the probability space. Our goal is to accelerate the uncertainty propagation using a polynomial chaos expansion based on stochastic collocation method. The whole concept is demonstrated on a simple numerical example of uniaxial test at a material point where interesting phenomena can be clearly understood.
△ Less
Submitted 6 February, 2014;
originally announced February 2014.
-
Selected topics in homogenization of transport processes in historical masonry structures
Authors:
Jan Sýkora,
Jan Zeman,
Michal Šejnoha
Abstract:
The paper reviews several topics associated with the homogenization of transport processed in historical masonry structures. Since these often experience an irregular or random pattern, we open the subject by summarizing essential steps in the formulation of a suitable computational model in the form of Statistically Equivalent Periodic Unit Cell (SEPUC). Accepting SEPUC as a reliable representati…
▽ More
The paper reviews several topics associated with the homogenization of transport processed in historical masonry structures. Since these often experience an irregular or random pattern, we open the subject by summarizing essential steps in the formulation of a suitable computational model in the form of Statistically Equivalent Periodic Unit Cell (SEPUC). Accepting SEPUC as a reliable representative volume element is supported by application of the Fast Fourier Transform to both the SEPUC and large binary sample of real masonry in search for effective thermal conductivities limited here to a steady state heat conduction problem. Fully coupled non-stationary heat and moisture transport is addressed next in the framework of two-scale first-order homogenization approach with emphases on the application of boundary and initial conditions on the meso-scale.
△ Less
Submitted 27 April, 2012;
originally announced April 2012.
-
Parameter Identification in a Probabilistic Setting
Authors:
Bojana V. Rosić,
Anna Kučerová,
Jan Sýkora,
Oliver Pajonk,
Alexander Litvinenko,
Hermann G. Matthies
Abstract:
Parameter identification problems are formulated in a probabilistic language, where the randomness reflects the uncertainty about the knowledge of the true values. This setting allows conceptually easily to incorporate new information, e.g. through a measurement, by connecting it to Bayes's theorem. The unknown quantity is modelled as a (may be high-dimensional) random variable. Such a description…
▽ More
Parameter identification problems are formulated in a probabilistic language, where the randomness reflects the uncertainty about the knowledge of the true values. This setting allows conceptually easily to incorporate new information, e.g. through a measurement, by connecting it to Bayes's theorem. The unknown quantity is modelled as a (may be high-dimensional) random variable. Such a description has two constituents, the measurable function and the measure. One group of methods is identified as updating the measure, the other group changes the measurable function. We connect both groups with the relatively recent methods of functional approximation of stochastic problems, and introduce especially in combination with the second group of methods a new procedure which does not need any sampling, hence works completely deterministically. It also seems to be the fastest and more reliable when compared with other methods. We show by example that it also works for highly nonlinear non-smooth problems with non-Gaussian measures.
△ Less
Submitted 19 January, 2012;
originally announced January 2012.
-
Computational homogenization of non-stationary transport processes in masonry structures
Authors:
J. Sykora,
T. Krejci,
J. Kruis,
M. Sejnoha
Abstract:
A fully coupled transient heat and moisture transport in a masonry structure is examined in this paper. Supported by several successful applications in civil engineering the nonlinear diffusion model proposed by Künzel is adopted in the present study. A strong material heterogeneity together with a significant dependence of the model parameters on initial conditions as well as the gradients of hea…
▽ More
A fully coupled transient heat and moisture transport in a masonry structure is examined in this paper. Supported by several successful applications in civil engineering the nonlinear diffusion model proposed by Künzel is adopted in the present study. A strong material heterogeneity together with a significant dependence of the model parameters on initial conditions as well as the gradients of heat and moisture fields vindicates the use of a hierarchical modeling strategy to solve the problem of this kind. Attention is limited to the classical first order homogenization in a spatial domain developed here in the framework of a two step (meso-macro) multi-scale computational scheme (FE^2 problem). Several illustrative examples are presented to investigate the influence of transient flow at the level of constituents (meso-scale) on the macroscopic response including the effect of macro-scale boundary conditions. A two-dimensional section of Charles Bridge subjected to actual climatic conditions is analyzed next to confirm the suitability of algorithmic format of FE^2 scheme for the parallel computing.
△ Less
Submitted 10 October, 2011;
originally announced October 2011.
-
Acceleration of Uncertainty Updating in the Description of Transport Processes in Heterogeneous Materials
Authors:
A. Kucerova,
J. Sykora,
B. Rosic,
H. G. Matthies
Abstract:
The prediction of thermo-mechanical behaviour of heterogeneous materials such as heat and moisture transport is strongly influenced by the uncertainty in parameters. Such materials occur e.g. in historic buildings, and the durability assessment of these therefore needs a reliable and probabilistic simulation of transport processes, which is related to the suitable identification of material parame…
▽ More
The prediction of thermo-mechanical behaviour of heterogeneous materials such as heat and moisture transport is strongly influenced by the uncertainty in parameters. Such materials occur e.g. in historic buildings, and the durability assessment of these therefore needs a reliable and probabilistic simulation of transport processes, which is related to the suitable identification of material parameters. In order to include expert knowledge as well as experimental results, one can employ an updating procedure such as Bayesian inference. The classical probabilistic setting of the identification process in Bayes's form requires the solution of a stochastic forward problem via computationally expensive sampling techniques, which makes the method almost impractical. In this paper novel stochastic computational techniques such as the stochastic Galerkin method are applied in order to accelerate the updating procedure. The idea is to replace the computationally expensive forward simulation via the conventional finite element (FE) method by the evaluation of a polynomial chaos expansion (PCE). Such an approximation of the FE model for the forward simulation perfectly suits the Bayesian updating. The presented uncertainty updating techniques are applied to the numerical model of coupled heat and moisture transport in heterogeneous materials with spatially varying coefficients defined by random fields.
△ Less
Submitted 10 October, 2011;
originally announced October 2011.
-
Uncertainty Updating in the Description of Coupled Heat and Moisture Transport in Heterogeneous Materials
Authors:
Anna Kucerova,
Jan Sykora
Abstract:
To assess the durability of structures, heat and moisture transport need to be analyzed. To provide a reliable estimation of heat and moisture distribution in a certain structure, one needs to include all available information about the loading conditions and material parameters. Moreover, the information should be accompanied by a corresponding evaluation of its credibility. Here, the Bayesian in…
▽ More
To assess the durability of structures, heat and moisture transport need to be analyzed. To provide a reliable estimation of heat and moisture distribution in a certain structure, one needs to include all available information about the loading conditions and material parameters. Moreover, the information should be accompanied by a corresponding evaluation of its credibility. Here, the Bayesian inference is applied to combine different sources of information, so as to provide a more accurate estimation of heat and moisture fields [1]. The procedure is demonstrated on the probabilistic description of heterogeneous material where the uncertainties consist of a particular value of individual material characteristic and spatial fluctuations. As for the heat and moisture transfer, it is modelled in coupled setting [2].
△ Less
Submitted 25 February, 2011;
originally announced February 2011.
-
Analysis of coupled heat and moisture transfer in masonry structures
Authors:
J. Sykora,
J. Vorel,
T. Krejci,
M. Sejnoha,
J. Sejnoha
Abstract:
Evaluation of effective or macroscopic coefficients of thermal conductivity under coupled heat and moisture transfer is presented. The paper first gives a detailed summary on the solution of a simple steady state heat conduction problem with an emphasis on various types of boundary conditions applied to the representative volume element -- a periodic unit cell. Since the results essentially sugg…
▽ More
Evaluation of effective or macroscopic coefficients of thermal conductivity under coupled heat and moisture transfer is presented. The paper first gives a detailed summary on the solution of a simple steady state heat conduction problem with an emphasis on various types of boundary conditions applied to the representative volume element -- a periodic unit cell. Since the results essentially suggest no superiority of any type of boundary conditions, the paper proceeds with the coupled nonlinear heat and moisture problem subjecting the selected representative volume element to the prescribed macroscopically uniform heat flux. This allows for a direct use of the academic or commercially available codes. Here, the presented results are derived with the help of the SIFEL (SIimple Finite Elements) system.
△ Less
Submitted 22 April, 2008;
originally announced April 2008.
-
Mesoscopic study on historic masonry
Authors:
J. Sejnoha,
M. Sejnoha,
J. Zeman,
J. Sykora,
J. Vorel
Abstract:
This paper presents a comprehensive approach to the evaluation of macroscopic material parameters for natural stone and quarry masonry. To that end, a reliable non-linear material model on a meso-scale is developed to cover the random arrangement of stone blocks and quasi-brittle behaviour of both basic components, as well as the impaired cohesion and tensile strength on the interface between th…
▽ More
This paper presents a comprehensive approach to the evaluation of macroscopic material parameters for natural stone and quarry masonry. To that end, a reliable non-linear material model on a meso-scale is developed to cover the random arrangement of stone blocks and quasi-brittle behaviour of both basic components, as well as the impaired cohesion and tensile strength on the interface between the blocks and mortar joints. The paper thus interrelates the following three problems: (i) definition of a suitable periodic unit cell (PUC) representing a particular masonry structure; (ii) derivation of material parameters of individual constituents either experimentally or running a mixed numerical-experimental problem; (iii) assessment of the macroscopic material parameters including the tensile and compressive strengths and fracture energy.
△ Less
Submitted 21 April, 2008;
originally announced April 2008.
-
Landscape phage, phage display, stripped phage, biosensors, detection, affinity reagent, nanotechnology, Salmonella typhimurium, Bacillus anthracis
Authors:
V. Petrenko,
J. Brigati,
J. Sykora,
Eric V. Olsen,
I. Sorokulova,
G. Kouzmitcheva,
I-Hsuan Chen,
J. Barbaree,
B. Chin,
V. Vodyanoy
Abstract:
Filamentous phage, such as fd used in this study, are thread-shaped bacterial viruses. Their outer coat is a tube formed by thousands equal copies of the major coat protein pVIII. We constructed libraries of random peptides fused to all pVIII domains and selected phages that act as probes specific for a panel of test antigens and biological threat agents. Because the viral carrier is infective,…
▽ More
Filamentous phage, such as fd used in this study, are thread-shaped bacterial viruses. Their outer coat is a tube formed by thousands equal copies of the major coat protein pVIII. We constructed libraries of random peptides fused to all pVIII domains and selected phages that act as probes specific for a panel of test antigens and biological threat agents. Because the viral carrier is infective, phage borne bio-selective probes can be cloned individually and propagated indefinitely without needs of their chemical synthesis or reconstructing. We demonstrated the feasibility of using landscape phages and their stripped fusion proteins as new bioselective materials that combine unique characteristics of affinity reagents and self assembling membrane proteins. Biorecognition layers fabricated from phage-derived probes bind biological agents and generate detectable signals. The performance of phage-derived materials as biorecognition films was illustrated by detection of streptavidin-coated beads, Bacillus anthracis spores and Salmonella typhimurium cells. With further refinement, the phage-derived analytical platforms for detecting and monitoring of numerous threat agents may be developed, since the biodetector films may be obtained from landscape phages selected against any bacteria, virus or toxin. As elements of field-use detectors, they are superior to antibodies, since they are inexpensive, highly specific and strong binders, resistant to high temperatures and environmental stresses.
△ Less
Submitted 14 August, 2007;
originally announced August 2007.